Hello:



I called tech support for jaws and they created a config file for me.



I shutdown outlook and restarted outlook and then typed in an address.



The computer still did not talk, so I shutdown the computer completely
and restarted and it worked.



Have a good day.

Hello:



I called tech support for jaws and they created a config file for me.



I shutdown outlook and restarted outlook and then typed in an address.



The computer still did not talk, so I shutdown the computer completely
and restarted and it worked.



Have a good day.

Had the same problem, but was in Office 2007!
Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
Toll Free: 316-425-7141
www.envisionus.com
Envision: To improve the quality of life and provide inspiration and opportunity for people who are blind or visually impaired through employment, outreach, rehabilitation, education and research.
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Don H
Sent: Tuesday, November 27, 2018 6:51 PM
To: main@jfw.groups.io
Subject: Jaws and MS word
Running Jaws 2019 on a Win 10 1809 laptop.
If I use the spell checker in Microsoft Word Jaws locks. At that point I can not close the spell checker or save the word document. Is this a known issue with Jaws 2019?
NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.

Hello:



I called tech support for jaws and they created a config file for me.



I shutdown outlook and restarted outlook and then typed in an address.



The computer still did not talk, so I shutdown the computer completely and
restarted and it worked.



Have a good day.

Yes, but also backup the freedomscientific scripts as well so you always have a clean copy if you need it.

----- Original Message -----

From: "Roger Newell" <inscriptioelectronicaaustralia@...>

To: <main@jfw.groups.io>

Sent: Thursday, November 29, 2018 3:31 AM

Subject: Re: JAWS Scripts - Are they interpreted or compiled?

Back up your user scripts folder, because this is where script files you modify are saved to, so that they do not become mixed with the scripts Freedom Scientific provides. The location of your user scripts folder is the one I provided in step 4 of Part a of my instructions.

On 11/29/18, Isaac <bigikemusic@...> wrote:

> also to add to what you just said, after a new install copy the

> default scripts folder some place else so you have a backup so in the

> future if you

> 

> are modifying scripts you don't have to uninstall jaws and reinstall

> as there might be other scripts you have modified and would lose.  The

> point is

> 

> hear, backup, backup, backup.  Always backup.

> ----- Original Message -----

> From: "Roger Newell" <inscriptioelectronicaaustralia@...>

> To: <main@jfw.groups.io>

> Sent: Thursday, November 29, 2018 12:43 AM

> Subject: Re: JAWS Scripts - Are they interpreted or compiled?

> 

> 

> Those instructions are incorrect. You should never modify default.jss

> or default.jsb files. There are other ways that Freedom Scientific has

> designed for you to create or modify JAWS behavior.

> 

> What you need to do is this:

> 

> Part A: Check your default.jss and default.jsb file 1. Open Script

> Manager and press CTRL+SHIFT+D to load the default file.

> 2. See if your punctuation script is in the file. If it is, keep

> following these instructions. If not, skip to Part B.

> 3. You need to get a clean copy of these files. The way I would

> recommend is to completely remove JAWS 2019 from your system. Then

> install JAWS 2019 again, but do not migrate any settings because then

> you will be back where you started.

> 4. Check before using JAWS that this folder is completely empty:

> C:\Users\[YourUserDirectory]\AppData\Roaming\Freedom

> Scientific\JAWS\2019\Settings\enu.

> 

> Part B: Adding your punctuation script 1. Open Script Manager.

> 2. Press CTRL+O to open the Open dialog.

> 3. Navigate to this location: C:\ProgramData\Freedom

> Scientific\JAWS\2019\Scripts.

> 4. Open the file MyExtensions.jss.

> 5. Write your script at the bottom of this file, and press CTRL+S to

> compile

> 

> it.

> 

> 

> On 11/29/18, Tom <tomcat509@...> wrote:

>> Hi,

>> Following is the punctuation script  and where it is available along

>> with installation instructions.

>> 

>> Maybe it does needs compiling again under Jaws 2019 and so I’ll try

>> that solution.

>> 

>> Source:

>> https://apc01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.

>> jaws-users.com%2Fscripts%2FJAWS%2FPunctuationLevelScript.html&amp;dat

>> a=02%7C01%7C%7C590911a1125c4533b86c08d655e56b86%7C84df9e7fe9f640afb43

>> 5aaaaaaaaaaaa%7C1%7C0%7C636790841167121260&amp;sdata=WDX7jUzXY2qmTsgU

>> wz6OKXEpj1Bm13oHCYAew3lGOxY%3D&amp;reserved=0

>> Follow these steps to insert the code required to set up a hot key to

>> toggle the Jaws punctuation level.

>> 

>> press insert 0 (on the number row).

>> press control shift D

>> You should hear jaws script manage default.jss.

>> Hit control+end this will take you to the bottom of the file.

>> Hit enter twice, to insert a couple of blank lines.

>> paste in the following lines for the script:

>> 

>> Script TogglePunctuation ()

>> Say (PunctuationToggle (false), ot_no_disable) EndScript

>> 

>> Place your cursor on the line that says Say (PunctuationToggle

>> (false), ot_no_disable).

>> Hit control+d.

>> Hit tab this will put you on the "can be attached to key" check box,

>> this should be checked, if it is not hit "space bar" to check it.

>> Hit tab this will take you to the "synopsis" where you can put in a

>> short description if you want.

>> Tab to the "assign short cut key" field and press the keystroke you

>> want to use for the script. Such as Control+Shift+P.

>> Tab to the okay button and enter. This will take you back to the

>> script editor.

>> Press control+S to compile your changes.

>> Press Alt-F4 to close the script editor

>> 

>> Cheers

>> Tom

>> 

>> -----Original Message-----

>> From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of

>> Roger Newell

>> Sent: Wednesday, 28 November 2018 7:07 PM

>> To: main@jfw.groups.io

>> Subject: Re: JAWS Scripts - Are they interpreted or compiled?

>> 

>> I haven't heard of this particular script.

>> 

>> Just to verify, is this a third-party script for which you were

>> provided with the .jsb file? If so, please make sure you can locate

>> the file in the following location:

>> C:\Users\[YourUserDirectory]\AppData\Roaming\Freedom

>> Scientific\JAWS\2019\Settings\enu If you have the .jss and/or .jsh

>> file, you should probably show it to someone who knows how to read it

>> to verify that it's not calling on a particular script or function or

>> something that's been moved around in JAWS 2019.

>> 

>> On 11/28/18, Tom <tomcat509@...> wrote:

>>> Using: W10 64 bit and Jaws 2019.

>>> 

>>> Hi

>>> 

>>> I have experienced a problem with the punctuation  script since

>>> upgrading from Jaws 2018 to 2019.

>>> 

>>> Under 2018, the script could be run from anywhere on the system but

>>> since changing to 2019, the only place the script works is when it

>>> is run from the desktop.  If I am in a folder on another drive say,

>>> hitting shift control P, Jaws says, "unknown script call to".

>>> 

>>> If I still wish to change the punctuation level then it is a trip

>>> back to the Desktop and try again.

>>> 

>>> Cheers

>>> Tom

>>> 

>>> 

>>> 

>>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

> 

> 

> 

> 

> 

> 

> 

Matthew May I have your email address ? I will go to try regular facebook to see what’s happens from there with my jaws 2018

Hi Addison,

M Facebook is generally less cluttered, which is why I suspect FS tech support encourage its use. Regular Facebook is still perfectly accessible, though.

As I say, I'm hardly a Facebook expert so I'm not sure what support I would be able to offer you off-list that others can't do better on-list.

Matthew

Hi Matthew Thanks for your response ,I wasn’t sure if www.facebook.com  is accessible with jaws because when I go on www.facebook.com  I noticed jaws was acted up on the page for some reason. So I did calls fs technical support about it she told me go to m.facebook.com where jaws is accessible better on it than regular facebook  for my u understanding that regular facebook  page have more features than m.facebook.com   page !! If you don’t mind writing me off list at  O.addisonGethers@... 

Addison

Hello Addison,

I am not a Facebook expert so I did not jump into this thread straight away, thinking that perhaps someone else might have a more thorough answer. But yes, the regular facebook.com website is accessible with JAWS.

There shouldn't be any difference in notifications between regular Facebook and M Facebook, as far as I know. You will not get notified every time somebody posts as this is the purpose of the news feed.

I hope I have understood your questions correctly. I wouldn't usually point it out, but since you bring it up, your messages don't contain very much punctuation and the wording is not very clear, so it does take quite a while for me to process what you've said and then even longer to interpret it. If you could perhaps insert a few more full stops it might make things a little easier.

Best wishes,

Matthew

Hello Is there anyone can helped me?If not then I don’t understand you all can helps other unless you all doesn’t understand me and not much experience on computer stuff and have not had much computer training . If I defend anyone feeling I’m sorry !!

Addison

Hello All  Is jaws accessible to read on www.facebook.com  ? I have been using m.facebook.com  website  I’m having problem not receiving notifications page with the people who’s I’m following and like theirs page to receive theirs post on notification on m.facebook.com  I was wonder if I need to go to regular facebook website. I noticed on yesterday I went on lite.facebook.com website and heard some of the people that I’m follow is there but when I press enter on it jaws is little behave acts on the page. I really need some help here because I can’t use my mobile phone with hearing impairment not able to hear voiceover loud enough to understandit. I have desktop and laptop computer.

Addison

also to add to what you just said, after a new install copy the default
scripts folder some place else so you have a backup so in the future if you

are modifying scripts you don't have to uninstall jaws and reinstall as
there might be other scripts you have modified and would lose. The point is

hear, backup, backup, backup. Always backup.
----- Original Message -----
From: "Roger Newell" <inscriptioelectronicaaustralia@gmail.com>
To: <main@jfw.groups.io>
Sent: Thursday, November 29, 2018 12:43 AM
Subject: Re: JAWS Scripts - Are they interpreted or compiled?


Those instructions are incorrect. You should never modify default.jss
or default.jsb files. There are other ways that Freedom Scientific has
designed for you to create or modify JAWS behavior.

What you need to do is this:

Part A: Check your default.jss and default.jsb file
1. Open Script Manager and press CTRL+SHIFT+D to load the default file.
2. See if your punctuation script is in the file. If it is, keep
following these instructions. If not, skip to Part B.
3. You need to get a clean copy of these files. The way I would
recommend is to completely remove JAWS 2019 from your system. Then
install JAWS 2019 again, but do not migrate any settings because then
you will be back where you started.
4. Check before using JAWS that this folder is completely empty:
C:\Users\[YourUserDirectory]\AppData\Roaming\Freedom
Scientific\JAWS\2019\Settings\enu.

Part B: Adding your punctuation script
1. Open Script Manager.
2. Press CTRL+O to open the Open dialog.
3. Navigate to this location: C:\ProgramData\Freedom
Scientific\JAWS\2019\Scripts.
4. Open the file MyExtensions.jss.
5. Write your script at the bottom of this file, and press CTRL+S to compile

it.


On 11/29/18, Tom <tomcat509@gmail.com> wrote:

Hi,
Following is the punctuation script and where it is available along with
installation instructions.

Maybe it does needs compiling again under Jaws 2019 and so I’ll try that
solution.

Source:
http://www.jaws-users.com/scripts/JAWS/PunctuationLevelScript.html
Follow these steps to insert the code required to set up a hot key to
toggle
the Jaws punctuation level.

press insert 0 (on the number row).
press control shift D
You should hear jaws script manage default.jss.
Hit control+end this will take you to the bottom of the file.
Hit enter twice, to insert a couple of blank lines.
paste in the following lines for the script:

Script TogglePunctuation ()
Say (PunctuationToggle (false), ot_no_disable)
EndScript

Place your cursor on the line that says Say (PunctuationToggle (false),
ot_no_disable).
Hit control+d.
Hit tab this will put you on the "can be attached to key" check box, this
should be checked, if it is not hit "space bar" to check it.
Hit tab this will take you to the "synopsis" where you can put in a short
description if you want.
Tab to the "assign short cut key" field and press the keystroke you want
to
use for the script. Such as Control+Shift+P.
Tab to the okay button and enter. This will take you back to the script
editor.
Press control+S to compile your changes.
Press Alt-F4 to close the script editor

Cheers
Tom

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Roger
Newell
Sent: Wednesday, 28 November 2018 7:07 PM
To: main@jfw.groups.io
Subject: Re: JAWS Scripts - Are they interpreted or compiled?

I haven't heard of this particular script.

Just to verify, is this a third-party script for which you were
provided with the .jsb file? If so, please make sure you can locate
the file in the following location:
C:\Users\[YourUserDirectory]\AppData\Roaming\Freedom
Scientific\JAWS\2019\Settings\enu If you have the .jss and/or .jsh
file, you should probably show it to someone who knows how to read it
to verify that it's not calling on a particular script or function or
something that's been moved around in JAWS 2019.

On 11/28/18, Tom <tomcat509@gmail.com> wrote:

Using: W10 64 bit and Jaws 2019.

Hi

I have experienced a problem with the punctuation script since
upgrading
from Jaws 2018 to 2019.

Under 2018, the script could be run from anywhere on the system but
since
changing to 2019, the only place the script works is when it is run from
the
desktop. If I am in a folder on another drive say, hitting shift
control
P,
Jaws says, "unknown script call to".

If I still wish to change the punctuation level then it is a trip back
to
the Desktop and try again.

Cheers
Tom

also to add to what you just said, after a new install copy the default
scripts folder some place else so you have a backup so in the future if you

are modifying scripts you don't have to uninstall jaws and reinstall as
there might be other scripts you have modified and would lose. The point is

hear, backup, backup, backup. Always backup.
----- Original Message -----
From: "Roger Newell" <inscriptioelectronicaaustralia@gmail.com>
To: <main@jfw.groups.io>
Sent: Thursday, November 29, 2018 12:43 AM
Subject: Re: JAWS Scripts - Are they interpreted or compiled?


Those instructions are incorrect. You should never modify default.jss
or default.jsb files. There are other ways that Freedom Scientific has
designed for you to create or modify JAWS behavior.

What you need to do is this:

Part A: Check your default.jss and default.jsb file
1. Open Script Manager and press CTRL+SHIFT+D to load the default file.
2. See if your punctuation script is in the file. If it is, keep
following these instructions. If not, skip to Part B.
3. You need to get a clean copy of these files. The way I would
recommend is to completely remove JAWS 2019 from your system. Then
install JAWS 2019 again, but do not migrate any settings because then
you will be back where you started.
4. Check before using JAWS that this folder is completely empty:
C:\Users\[YourUserDirectory]\AppData\Roaming\Freedom
Scientific\JAWS\2019\Settings\enu.

Part B: Adding your punctuation script
1. Open Script Manager.
2. Press CTRL+O to open the Open dialog.
3. Navigate to this location: C:\ProgramData\Freedom
Scientific\JAWS\2019\Scripts.
4. Open the file MyExtensions.jss.
5. Write your script at the bottom of this file, and press CTRL+S to compile

it.


On 11/29/18, Tom <tomcat509@gmail.com> wrote:

Hi,
Following is the punctuation script and where it is available along with
installation instructions.

Maybe it does needs compiling again under Jaws 2019 and so I’ll try that
solution.

Source:
http://www.jaws-users.com/scripts/JAWS/PunctuationLevelScript.html
Follow these steps to insert the code required to set up a hot key to
toggle
the Jaws punctuation level.

press insert 0 (on the number row).
press control shift D
You should hear jaws script manage default.jss.
Hit control+end this will take you to the bottom of the file.
Hit enter twice, to insert a couple of blank lines.
paste in the following lines for the script:

Script TogglePunctuation ()
Say (PunctuationToggle (false), ot_no_disable)
EndScript

Place your cursor on the line that says Say (PunctuationToggle (false),
ot_no_disable).
Hit control+d.
Hit tab this will put you on the "can be attached to key" check box, this
should be checked, if it is not hit "space bar" to check it.
Hit tab this will take you to the "synopsis" where you can put in a short
description if you want.
Tab to the "assign short cut key" field and press the keystroke you want
to
use for the script. Such as Control+Shift+P.
Tab to the okay button and enter. This will take you back to the script
editor.
Press control+S to compile your changes.
Press Alt-F4 to close the script editor

Cheers
Tom

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Roger
Newell
Sent: Wednesday, 28 November 2018 7:07 PM
To: main@jfw.groups.io
Subject: Re: JAWS Scripts - Are they interpreted or compiled?

I haven't heard of this particular script.

Just to verify, is this a third-party script for which you were
provided with the .jsb file? If so, please make sure you can locate
the file in the following location:
C:\Users\[YourUserDirectory]\AppData\Roaming\Freedom
Scientific\JAWS\2019\Settings\enu If you have the .jss and/or .jsh
file, you should probably show it to someone who knows how to read it
to verify that it's not calling on a particular script or function or
something that's been moved around in JAWS 2019.

On 11/28/18, Tom <tomcat509@gmail.com> wrote:

Using: W10 64 bit and Jaws 2019.

Hi

I have experienced a problem with the punctuation script since
upgrading
from Jaws 2018 to 2019.

Under 2018, the script could be run from anywhere on the system but
since
changing to 2019, the only place the script works is when it is run from
the
desktop. If I am in a folder on another drive say, hitting shift
control
P,
Jaws says, "unknown script call to".

If I still wish to change the punctuation level then it is a trip back
to
the Desktop and try again.

Cheers
Tom

Hi,
Following is the punctuation script and where it is available along with
installation instructions.

Maybe it does needs compiling again under Jaws 2019 and so I’ll try that
solution.

Source: http://www.jaws-users.com/scripts/JAWS/PunctuationLevelScript.html
Follow these steps to insert the code required to set up a hot key to toggle
the Jaws punctuation level.

press insert 0 (on the number row).
press control shift D
You should hear jaws script manage default.jss.
Hit control+end this will take you to the bottom of the file.
Hit enter twice, to insert a couple of blank lines.
paste in the following lines for the script:

Script TogglePunctuation ()
Say (PunctuationToggle (false), ot_no_disable)
EndScript

Place your cursor on the line that says Say (PunctuationToggle (false),
ot_no_disable).
Hit control+d.
Hit tab this will put you on the "can be attached to key" check box, this
should be checked, if it is not hit "space bar" to check it.
Hit tab this will take you to the "synopsis" where you can put in a short
description if you want.
Tab to the "assign short cut key" field and press the keystroke you want to
use for the script. Such as Control+Shift+P.
Tab to the okay button and enter. This will take you back to the script
editor.
Press control+S to compile your changes.
Press Alt-F4 to close the script editor

Cheers
Tom

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Roger
Newell
Sent: Wednesday, 28 November 2018 7:07 PM
To: main@jfw.groups.io
Subject: Re: JAWS Scripts - Are they interpreted or compiled?

I haven't heard of this particular script.

Just to verify, is this a third-party script for which you were
provided with the .jsb file? If so, please make sure you can locate
the file in the following location:
C:\Users\[YourUserDirectory]\AppData\Roaming\Freedom
Scientific\JAWS\2019\Settings\enu If you have the .jss and/or .jsh
file, you should probably show it to someone who knows how to read it
to verify that it's not calling on a particular script or function or
something that's been moved around in JAWS 2019.

On 11/28/18, Tom <tomcat509@gmail.com> wrote:

Using: W10 64 bit and Jaws 2019.

Hi

I have experienced a problem with the punctuation script since upgrading
from Jaws 2018 to 2019.

Under 2018, the script could be run from anywhere on the system but since
changing to 2019, the only place the script works is when it is run from
the
desktop. If I am in a folder on another drive say, hitting shift control
P,
Jaws says, "unknown script call to".

If I still wish to change the punctuation level then it is a trip back to
the Desktop and try again.

Cheers
Tom

Hi,
Following is the punctuation script and where it is available along with
installation instructions.

Maybe it does needs compiling again under Jaws 2019 and so I’ll try that
solution.

Source: http://www.jaws-users.com/scripts/JAWS/PunctuationLevelScript.html
Follow these steps to insert the code required to set up a hot key to toggle
the Jaws punctuation level.

press insert 0 (on the number row).
press control shift D
You should hear jaws script manage default.jss.
Hit control+end this will take you to the bottom of the file.
Hit enter twice, to insert a couple of blank lines.
paste in the following lines for the script:

Script TogglePunctuation ()
Say (PunctuationToggle (false), ot_no_disable)
EndScript

Place your cursor on the line that says Say (PunctuationToggle (false),
ot_no_disable).
Hit control+d.
Hit tab this will put you on the "can be attached to key" check box, this
should be checked, if it is not hit "space bar" to check it.
Hit tab this will take you to the "synopsis" where you can put in a short
description if you want.
Tab to the "assign short cut key" field and press the keystroke you want to
use for the script. Such as Control+Shift+P.
Tab to the okay button and enter. This will take you back to the script
editor.
Press control+S to compile your changes.
Press Alt-F4 to close the script editor

Cheers
Tom

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Roger
Newell
Sent: Wednesday, 28 November 2018 7:07 PM
To: main@jfw.groups.io
Subject: Re: JAWS Scripts - Are they interpreted or compiled?

I haven't heard of this particular script.

Just to verify, is this a third-party script for which you were
provided with the .jsb file? If so, please make sure you can locate
the file in the following location:
C:\Users\[YourUserDirectory]\AppData\Roaming\Freedom
Scientific\JAWS\2019\Settings\enu If you have the .jss and/or .jsh
file, you should probably show it to someone who knows how to read it
to verify that it's not calling on a particular script or function or
something that's been moved around in JAWS 2019.

On 11/28/18, Tom <tomcat509@gmail.com> wrote:

Using: W10 64 bit and Jaws 2019.

Hi

I have experienced a problem with the punctuation script since upgrading
from Jaws 2018 to 2019.

Under 2018, the script could be run from anywhere on the system but since
changing to 2019, the only place the script works is when it is run from
the
desktop. If I am in a folder on another drive say, hitting shift control
P,
Jaws says, "unknown script call to".

If I still wish to change the punctuation level then it is a trip back to
the Desktop and try again.

Cheers
Tom

Thanks. What is the PC cursor in laptop layout? Feeling kin od stupid right now. Thanks for your help. Keith

Hi,

Can someone please remind me how to turn on and off Touch Cursor in Windows 10?

Thanks. Keith

Hi,

Can someone please remind me how to turn on and off Touch Cursor in Windows 10?

Thanks. Keith

Using: W10 64 bit and Jaws 2019.

Hi

I have experienced a problem with the punctuation script since upgrading
from Jaws 2018 to 2019.

Under 2018, the script could be run from anywhere on the system but since
changing to 2019, the only place the script works is when it is run from
the
desktop. If I am in a folder on another drive say, hitting shift control
P,
Jaws says, "unknown script call to".

If I still wish to change the punctuation level then it is a trip back to
the Desktop and try again.

Cheers
Tom