Date   

Re: Opening a web shortcut with a particular browser

Dave...
 

Kimber,

The shortcut you created is based on using an URL to launch a web site. It
will not work with a file execution.

First, make a copy of some other shortcut on your desktop that *does not*
launch a web page, such as Notepad, your email program, etc. Something that
does not have an http: in the first edit field.

Now Alt+Enter on that copied shortcut and edit the first field with your
browser file path followed by the http: of the web site you want.
Make sure to surround the file path with quotation marks if there are any
spaces in the folder or file names -- it cannot have any spaces.

Save the shortcut and then use F2 to rename the icon on your desktop.

Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@gmail.com>
To: <main@jfw.groups.io>
Sent: Wednesday, November 21, 2018 06:32
Subject: Re: Opening a web shortcut with a particular browser


Thanks again. Now for some troubleshooting. When I open properties and
enter my file path before the url of the BARD site everything looks
fine. I ok out then when I test it I am seeing a message that says
this page can't be displayed. When I go back into the properties I am
seeing http in front of my file path. I'm guessing this is the
problem, but I can't seem to get rid of that http. Everytime I delete
it and exit it gets put back. What am I doing wrong?

On 11/21/18, Kimber Gardner <kimbersinbox1963@gmail.com> wrote:
Thank you, Mike. Now a follow-up question. How do I find the file path
for the browser I want to use?

Thanks

On 11/21/18, Mike B. <mike9902@gmx.com> wrote:
Hi Kimber,

I think this is what you are looking for:
From: Jeremy

Regarding creating shortcuts to webpages using a browser other than the
default browser, it can be done as I previously stated, just remember
that
you
must add the path to the browser's executable first, then add the URL
second. Also know that the entire browser path must be put in quotes or
else

the
shortcut won't work.

Regarding creating shortcuts to webpages other than the default browser.

One must first include the path to the browser in quotes then add the URL
to

the webpage. Here's an example:

"C:\Program Files (x86)\Internet Explorer\iexplore.exe"
https://www.freedomscientific.com/Downloads/JAWS

JR
Take care. Go Rams!
Sent from my iBarstool.
I type out everything I want to remember. That way instead of spending a
lot

of time trying to remember what it was, I spend the time looking for
where
I

saved it!
----- Original Message -----
From: Kimber Gardner
To: main
Sent: Wednesday, November 21, 2018 4:01 AM
Subject: Opening a web shortcut with a particular browser


Hello,

Not too long ago there was a discussion of how to make a shortcut to a
web site open with a particular browser that isn't your default
browser. I believe that discussion took place on this list, but I
can't find the relevant posts. Would someone be good enough to refresh
my memory on how to accomplish this?

Specifically what I want to do is open the NLS BARD web site using
firefox which is not my default browser.

Thanks for any help.
Kim


--
Kimberly






--
Kimberly




--
Kimberly


Re: Opening a web shortcut with a particular browser

Richard Turner
 

It works for me.
Are you making sure the "Target" field has the path to the browser in quotes followed by the web site like http://www.pbs.org

Perhaps you could spell out the steps you are using to create the shortcut?

Richard


“Definition of an expert: An ex is a has-been and a spirt is a drip under pressure.” – Bruce U. Utah Phillips

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kimber Gardner
Sent: Wednesday, November 21, 2018 6:33 AM
To: main@jfw.groups.io
Subject: Re: Opening a web shortcut with a particular browser

Thanks again. Now for some troubleshooting. When I open properties and enter my file path before the url of the BARD site everything looks fine. I ok out then when I test it I am seeing a message that says this page can't be displayed. When I go back into the properties I am seeing http in front of my file path. I'm guessing this is the problem, but I can't seem to get rid of that http. Everytime I delete it and exit it gets put back. What am I doing wrong?

On 11/21/18, Kimber Gardner <kimbersinbox1963@gmail.com> wrote:
Thank you, Mike. Now a follow-up question. How do I find the file path
for the browser I want to use?

Thanks

On 11/21/18, Mike B. <mike9902@gmx.com> wrote:
Hi Kimber,

I think this is what you are looking for:
From: Jeremy

Regarding creating shortcuts to webpages using a browser other than
the default browser, it can be done as I previously stated, just
remember that you must add the path to the browser’s executable
first, then add the URL second. Also know that the entire browser
path must be put in quotes or else

the
shortcut won’t work.

Regarding creating shortcuts to webpages other than the default
browser…

One must first include the path to the browser in quotes then add the
URL to

the webpage. Here’s an example:

"C:\Program Files (x86)\Internet Explorer\iexplore.exe"
https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww
.freedomscientific.com%2FDownloads%2FJAWS&amp;data=02%7C01%7C%7C77a0a
01fd72541157d7908d64fbe3d74%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C
0%7C636784075817606764&amp;sdata=6swZGUYX%2BlBYfpZO%2Bo%2Fm2pmwSxunF7
3mO0fhbd98ogI%3D&amp;reserved=0

JR
Take care. Go Rams!
Sent from my iBarstool.
I type out everything I want to remember. That way instead of
spending a lot

of time trying to remember what it was, I spend the time looking for
where I

saved it!
----- Original Message -----
From: Kimber Gardner
To: main
Sent: Wednesday, November 21, 2018 4:01 AM
Subject: Opening a web shortcut with a particular browser


Hello,

Not too long ago there was a discussion of how to make a shortcut to
a web site open with a particular browser that isn't your default
browser. I believe that discussion took place on this list, but I
can't find the relevant posts. Would someone be good enough to
refresh my memory on how to accomplish this?

Specifically what I want to do is open the NLS BARD web site using
firefox which is not my default browser.

Thanks for any help.
Kim


--
Kimberly






--
Kimberly




--
Kimberly


Re: Opening a web shortcut with a particular browser

Kimber Gardner
 

Thanks again. Now for some troubleshooting. When I open properties and
enter my file path before the url of the BARD site everything looks
fine. I ok out then when I test it I am seeing a message that says
this page can't be displayed. When I go back into the properties I am
seeing http in front of my file path. I'm guessing this is the
problem, but I can't seem to get rid of that http. Everytime I delete
it and exit it gets put back. What am I doing wrong?

On 11/21/18, Kimber Gardner <kimbersinbox1963@gmail.com> wrote:
Thank you, Mike. Now a follow-up question. How do I find the file path
for the browser I want to use?

Thanks

On 11/21/18, Mike B. <mike9902@gmx.com> wrote:
Hi Kimber,

I think this is what you are looking for:
From: Jeremy

Regarding creating shortcuts to webpages using a browser other than the
default browser, it can be done as I previously stated, just remember
that
you
must add the path to the browser’s executable first, then add the URL
second. Also know that the entire browser path must be put in quotes or
else

the
shortcut won’t work.

Regarding creating shortcuts to webpages other than the default browser…

One must first include the path to the browser in quotes then add the URL
to

the webpage. Here’s an example:

"C:\Program Files (x86)\Internet Explorer\iexplore.exe"
https://www.freedomscientific.com/Downloads/JAWS

JR
Take care. Go Rams!
Sent from my iBarstool.
I type out everything I want to remember. That way instead of spending a
lot

of time trying to remember what it was, I spend the time looking for where
I

saved it!
----- Original Message -----
From: Kimber Gardner
To: main
Sent: Wednesday, November 21, 2018 4:01 AM
Subject: Opening a web shortcut with a particular browser


Hello,

Not too long ago there was a discussion of how to make a shortcut to a
web site open with a particular browser that isn't your default
browser. I believe that discussion took place on this list, but I
can't find the relevant posts. Would someone be good enough to refresh
my memory on how to accomplish this?

Specifically what I want to do is open the NLS BARD web site using
firefox which is not my default browser.

Thanks for any help.
Kim


--
Kimberly






--
Kimberly



--
Kimberly


Re: Opening a web shortcut with a particular browser

Richard Turner
 

Hit WindowsKey+r and type c:\ in the run dialog and hit enter.
Then, hit the letter p until you get to Program files, or Program files x86 and hit enter. You may have to check in both depending on the windows version and how the browser installed.
Once in one of those folders, arrow down or use first letter navigation until you get to the folder for that browser and hit enter.
Then you need to find the .exe file for your browser. Once you are on that file, do not hit enter, but hit shift+f10 or use the applications key and arrow up or down to copy as path and hit enter.
You now have the path in your clipboard and can paste it where you want.

HTH,
Richard

“Definition of an expert: An ex is a has-been and a spirt is a drip under pressure.” – Bruce U. Utah Phillips

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kimber Gardner
Sent: Wednesday, November 21, 2018 6:06 AM
To: main@jfw.groups.io
Subject: Re: Opening a web shortcut with a particular browser

Thank you, Mike. Now a follow-up question. How do I find the file path for the browser I want to use?

Thanks

On 11/21/18, Mike B. <mike9902@gmx.com> wrote:
Hi Kimber,

I think this is what you are looking for:
From: Jeremy

Regarding creating shortcuts to webpages using a browser other than
the default browser, it can be done as I previously stated, just
remember that you must add the path to the browser’s executable first,
then add the URL second. Also know that the entire browser path must
be put in quotes or else

the
shortcut won’t work.

Regarding creating shortcuts to webpages other than the default
browser…

One must first include the path to the browser in quotes then add the
URL to

the webpage. Here’s an example:

"C:\Program Files (x86)\Internet Explorer\iexplore.exe"
https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.
freedomscientific.com%2FDownloads%2FJAWS&amp;data=02%7C01%7C%7C87319b5
2bda24cf17c2e08d64fba89b1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7
C636784059918626559&amp;sdata=G%2Buo5Kr31iREkIpBDhV%2F3%2Fq%2Bz63aYFg%
2F5kkSj9%2FjtSs%3D&amp;reserved=0

JR
Take care. Go Rams!
Sent from my iBarstool.
I type out everything I want to remember. That way instead of spending
a lot

of time trying to remember what it was, I spend the time looking for
where I

saved it!
----- Original Message -----
From: Kimber Gardner
To: main
Sent: Wednesday, November 21, 2018 4:01 AM
Subject: Opening a web shortcut with a particular browser


Hello,

Not too long ago there was a discussion of how to make a shortcut to a
web site open with a particular browser that isn't your default
browser. I believe that discussion took place on this list, but I
can't find the relevant posts. Would someone be good enough to refresh
my memory on how to accomplish this?

Specifically what I want to do is open the NLS BARD web site using
firefox which is not my default browser.

Thanks for any help.
Kim


--
Kimberly






--
Kimberly


Re: Opening a web shortcut with a particular browser

Kimber Gardner
 

Thank you, Mike. Now a follow-up question. How do I find the file path
for the browser I want to use?

Thanks

On 11/21/18, Mike B. <mike9902@gmx.com> wrote:
Hi Kimber,

I think this is what you are looking for:
From: Jeremy

Regarding creating shortcuts to webpages using a browser other than the
default browser, it can be done as I previously stated, just remember that
you
must add the path to the browser’s executable first, then add the URL
second. Also know that the entire browser path must be put in quotes or else

the
shortcut won’t work.

Regarding creating shortcuts to webpages other than the default browser…

One must first include the path to the browser in quotes then add the URL to

the webpage. Here’s an example:

"C:\Program Files (x86)\Internet Explorer\iexplore.exe"
https://www.freedomscientific.com/Downloads/JAWS

JR
Take care. Go Rams!
Sent from my iBarstool.
I type out everything I want to remember. That way instead of spending a lot

of time trying to remember what it was, I spend the time looking for where I

saved it!
----- Original Message -----
From: Kimber Gardner
To: main
Sent: Wednesday, November 21, 2018 4:01 AM
Subject: Opening a web shortcut with a particular browser


Hello,

Not too long ago there was a discussion of how to make a shortcut to a
web site open with a particular browser that isn't your default
browser. I believe that discussion took place on this list, but I
can't find the relevant posts. Would someone be good enough to refresh
my memory on how to accomplish this?

Specifically what I want to do is open the NLS BARD web site using
firefox which is not my default browser.

Thanks for any help.
Kim


--
Kimberly





--
Kimberly


Re: JAWS 2019 disc

John Doering
 

Thanks, did they say when the mailing would start?

Regards,




John Doering
Administrative Pricing Asst

p. 4147783040 Extn:4063 t. 800-642-8778

NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Don H
Sent: Wednesday, November 21, 2018 7:41 AM
To: main@jfw.groups.io
Subject: Re: JAWS 2019 disc

I contacted support and they said they would be sending out discs for 2019

On 11/21/2018 6:50 AM, John Doering wrote:
Hello and Happy Thanksgiving:

Before I contact SF, does anyone on the list know if SF will be
mailing out JAWS 2019 program discs to persons who have updates coming
on their SMAs?

Thanks,

John Doering

Administrative Pricing Asst**

*
p.4147783040 Extn:4063t.800-642-8778

*

NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you
are not the intended recipient, nor the employee or agent responsible
for delivering this message in confidence to the intended
recipient(s), you are hereby notified that you have received this
transmittal in error, and any review, dissemination, distribution or
copying of this transmittal or its attachments is strictly prohibited.
If you have received this transmittal and/or attachments in error,
please notify me immediately by reply e-mail and then delete this
message, including any attachments.


Re: JAWS 2019 disc

Don H
 

I contacted support and they said they would be sending out discs for 2019

On 11/21/2018 6:50 AM, John Doering wrote:
Hello and Happy Thanksgiving:
Before I contact SF, does anyone on the list know if SF will be mailing out JAWS 2019 program discs to persons who have updates coming on their SMAs?
Thanks,
John Doering
Administrative Pricing Asst**
*
p.4147783040 Extn:4063t.800-642-8778
*
NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.


Re: Opening a web shortcut with a particular browser

Mike B. <mike9902@...>
 


Hi Kimber,
 
I think this is what you are looking for:
From: Jeremy
 
Regarding creating shortcuts to webpages using a browser other than the default browser, it can be done as I previously stated, just remember that you
must add the path to the browser’s executable first, then add the URL second. Also know that the entire browser path must be put in quotes or else the
shortcut won’t work.  
 
Regarding creating shortcuts to webpages other than the default browser…  
 
One must first include the path to the browser in quotes then add the URL to the webpage. Here’s an example:
 
"C:\Program Files (x86)\Internet Explorer\iexplore.exe"
https://www.freedomscientific.com/Downloads/JAWS 
 
JR
Take care.  Go Rams!
Sent from my iBarstool.
I type out everything I want to remember. That way instead of spending a lot of time trying to remember what it was, I spend the time looking for where I saved it!

----- Original Message -----
To: main
Sent: Wednesday, November 21, 2018 4:01 AM
Subject: Opening a web shortcut with a particular browser

Hello,

Not too long ago there was a discussion of how to make a shortcut to a
web site open with a particular browser that isn't your default
browser. I believe that discussion took place on this list, but I
can't find the relevant posts. Would someone be good enough to refresh
my memory on how to accomplish this?

Specifically what I want to do is open the NLS BARD web site using
firefox which is not my default browser.

Thanks for any help.
Kim


--
Kimberly



Re: 2 problems with Jaws 2019 and Microsoft Teams

Dean Martineau <topdot@...>
 

If you are in the US, and perhaps other countries, you can connect free to an Aira agent when using JAWS and find something inaccessible and the agent can either guide you or click buttons as needed. 

 

Thought-provoking reading: http://bahaiteachings.org

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Delaunay Christophe
Sent: Wednesday, November 21, 2018 5:57 AM
To: jfw@groups.io
Subject: 2 problems with Jaws 2019 and Microsoft Teams

 

Hi all,

 

My PC is a Dell laptop running Windows 7 Entreprise Edition and Jaws 2019.

 

I was recently added to a Microsoft Teams group and I need to edit Word documents which are shared in this group.

 

The leader of this group sent a mail to all the people he invited with a link to the list of documents he initiated. The first time I clicked this link, I was requested to download the Microsoft Teams application. I did it and then installed it. Second time I clicked the link, Microsoft Teams opened up and showed me the list of document. I clicked on one of them and saw a menu with three options: Edit in Microsoft Team, Edit in Microsoft Word and Edit in Microsoft Word Online. I chose the second but, while Word was opening and loading the file, Teams showed a dialog box saying something like “Also feel free to edit the document in Teams” with a “close” button and a “ok” button. I clicked the “ok” button but nothing happened. Same with the “close” button.

 

During this time, Word could finish loading the document and I edited it as I wanted before saving it and then closing Word.

 

Back to Teams, Jaws did not show me anything, neither speaking, neither in Braille. When I tried to move the cursor, it always said “blank”. A sighted colleague got me out of this trap by clicking a “close” button in the document pane and Teams got back to the file list presented in a table.

 

However, does anyone know how to get out of such a trap when there is no way to have sighted assistance?

 

Another problem with Teams is that when I right click on its systray icon, Jaws says “menu” but no menu item is spoken. Is there a way to determine which items are displayed in the Teams systray icon context menu and to interact with them?

 

Many thanks in advance for any advice. Have a nice day. Chris D


JAWS 2019 disc

John Doering
 

Hello and Happy Thanksgiving:

Before I contact SF, does anyone on the list know if SF will be mailing out JAWS 2019 program discs to persons who have updates coming on their SMAs?

 

Thanks,

 

 

John Doering

Administrative Pricing Asst 

 
p. 4147783040 Extn:4063  t. 800-642-8778

 

NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.


Opening a web shortcut with a particular browser

Kimber Gardner
 

Hello,

Not too long ago there was a discussion of how to make a shortcut to a
web site open with a particular browser that isn't your default
browser. I believe that discussion took place on this list, but I
can't find the relevant posts. Would someone be good enough to refresh
my memory on how to accomplish this?

Specifically what I want to do is open the NLS BARD web site using
firefox which is not my default browser.

Thanks for any help.
Kim


--
Kimberly


Re: Taking out Hard and soft page breaks in Notepad after copying and pasting text

Matthew Horspool
 

Hi bill,
That works in Microsoft Word but not in Notepad, at least not on my Windows 7 computer at work! Perhaps it does under Windows 10.
In Notepad it is a real pain because there doesn't seem to be a way of typing a formfeed character directly, even though you can copy/paste them in or have some other program put them in for you. The solution, as far as I can find, is to manually find an instance of a formfeed character (hard page break, if you like), copy it to the clipboard, and then paste it into the "Find" box of the "Find/Replace" dialog. Leave the "Replace" field blank as Bill has already said.
Soft page breaks cannot be removed by their very nature. However, if they are caused by excessive line breaks, you can delete those. There isn't, as far as I know, a way of automating that process in Notepad though.
Where are you copying/pasting from? If Word, you might have better results removing all this white space in Word, following the instructions that Bill gave, and then copying/pasting the cleaned up text.
Matthew

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Bill White
Sent: 20 November 2018 20:33
To: main@jfw.groups.io
Subject: Re: Taking out Hard and soft page breaks in Notepad after copying and pasting text

Hi, Sharon. To remove special characters with the Find/Replace in Notepad:

for page breaks type ^p in the Find box; for paragraph breaks use ^m

The Caret is the number six on the numbers row with the Shift key.

In the Replace box don't type anything. Then TAB and click Replace All to remove all page or paragraph breaks

Bill White

billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sharon
Sent: Tuesday, November 20, 2018 11:58 AM
To: main@jfw.groups.io
Subject: Taking out Hard and soft page breaks in Notepad after copying and pasting text

Anyone know the keystrokes to do this in the replace all dialogue box?
Sharon


2 problems with Jaws 2019 and Microsoft Teams

Delaunay Christophe
 

Hi all,

 

My PC is a Dell laptop running Windows 7 Entreprise Edition and Jaws 2019.

 

I was recently added to a Microsoft Teams group and I need to edit Word documents which are shared in this group.

 

The leader of this group sent a mail to all the people he invited with a link to the list of documents he initiated. The first time I clicked this link, I was requested to download the Microsoft Teams application. I did it and then installed it. Second time I clicked the link, Microsoft Teams opened up and showed me the list of document. I clicked on one of them and saw a menu with three options: Edit in Microsoft Team, Edit in Microsoft Word and Edit in Microsoft Word Online. I chose the second but, while Word was opening and loading the file, Teams showed a dialog box saying something like “Also feel free to edit the document in Teams” with a “close” button and a “ok” button. I clicked the “ok” button but nothing happened. Same with the “close” button.

 

During this time, Word could finish loading the document and I edited it as I wanted before saving it and then closing Word.

 

Back to Teams, Jaws did not show me anything, neither speaking, neither in Braille. When I tried to move the cursor, it always said “blank”. A sighted colleague got me out of this trap by clicking a “close” button in the document pane and Teams got back to the file list presented in a table.

 

However, does anyone know how to get out of such a trap when there is no way to have sighted assistance?

 

Another problem with Teams is that when I right click on its systray icon, Jaws says “menu” but no menu item is spoken. Is there a way to determine which items are displayed in the Teams systray icon context menu and to interact with them?

 

Many thanks in advance for any advice. Have a nice day. Chris D


Re: Jaws accessible program to rip region coded DVD

Cristóbal
 

Thanks, I’ll give this a look-see. Need a full extractor. Probably something that can create an ISO or where I can have the full DVD content (including all extras) available for streaming. It’s fairly rare that we need this now. Thus my reluctance to pay for a full blown player or software, but so it goes. If I have to pay for a license, I guess.

 

Cristóbal

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Tuesday, November 20, 2018 2:55 PM
To: main@jfw.groups.io
Subject: Re: Jaws accessible program to rip region coded DVD

 

HI Cristobal.

I still need to ask some friends about this, but this page might offer you some helpful suggestions:

https://www.videoconverterfactory.com/tips/how-to-remove-region-code-from-dvd-actually.html

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cristóbal
Sent: November 20, 2018 5:30 PM
To: jfw@groups.io
Subject: Jaws accessible program to rip region coded DVD

 

Hello list,

I’m in search of a program that can rip DVDs with region codes. Is anyone aware of such a thing? The wife and I had a region code free DVD player for years, but that thing has long since died. We don’t want to buy a new DVD player for the odd-ball DVD she gets from Germany and figured it would make more sense to try to rip it for playback on other devices. Be it a computer or to burn on a new disk. We’ve tried Hand Break, but that doesn’t seem to work.

Again, to be clear, it needs to be able to bypass the region codes that restrict playback on devices in certain parts of the world. This is the particular issue we’re trying to overcome.

I’m a Jaws user, so anything that’s accessible would be preferred. Really though, just looking for something that will do the job.

Thanks,

Cristóbal


Re: How to make jaws read number of items

David Goldfield <david.goldfield@...>
 

The only method that I've found to get JAWS to speak the number of items in a list is either to read the current line (insert-up arrow) or to press insert-tab.

David Goldfield, Assistive Technology Specialist WWW.David-Goldfield.Com

On 11/20/2018 10:45 AM, Cook, Steve wrote:
JAWS key plus 3 on the numpad

Steve Cook, CPM
Assistive Technology Consultant
SC Commission for the Blind
1430 Confederate avenue
Columbia, SC 29201
Phone: (803) 898-8788
Fax: (803) 898-8882
E-Mail: steve.cook@...

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Steve Nutt
Sent: Tuesday, November 20, 2018 10:08 AM
To: main@jfw.groups.io
Subject: Re: How to make jaws read number of items

Eh?  JAWS Key + 3 is bypass.  How will that help?

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cook, Steve
Sent: 02 November 2018 15:59
To: main@jfw.groups.io
Subject: Re: How to make jaws read number of items

Try jaws key plus 3

Steve Cook, CPM
Assistive Technology Consultant
SC Commission for the Blind
1430 Confederate avenue
Columbia, SC 29201
Phone: (803) 898-8788
Fax: (803) 898-8882
E-Mail: steve.cook@...

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of George Gray
Sent: Friday, November 2, 2018 9:08 AM
To: main@jfw.groups.io
Subject: Re: How to make jaws read number of items

I also have this situation.  It appears that somehow a maximum of 13 is the count in any Folder where I have many additional files.

If I pres Enter + T it reads the file name and whatever it's place in 13.  And, when I press Enter + Tab I hear the same.

Thanks.

On 11/2/18, Ann Byrne <annakb@...> wrote:
In most cases, insert+tab will read the current item, plus how many of 
how many.

I hope this works in your case.
At 05:29 AM 11/2/2018, you wrote:
I used to use window eyes. It would read the number if items in a 
folder after reading off a file name. Is there a way to do this in 
jaws? Right now jaws only reads item names in file explorer not how 
many items there afterwards

Thanks

Jim








--
HAVE A MAGNIFICENT DAY

GEORGE BURRELL GRAY

Ocean Winds
Cabarete/Sosua
REPUBLICA DOMINICANA















Re: Jaws accessible program to rip region coded DVD

JM Casey
 

HI Cristobal.

I still need to ask some friends about this, but this page might offer you some helpful suggestions:

https://www.videoconverterfactory.com/tips/how-to-remove-region-code-from-dvd-actually.html

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cristóbal
Sent: November 20, 2018 5:30 PM
To: jfw@groups.io
Subject: Jaws accessible program to rip region coded DVD

 

Hello list,

I’m in search of a program that can rip DVDs with region codes. Is anyone aware of such a thing? The wife and I had a region code free DVD player for years, but that thing has long since died. We don’t want to buy a new DVD player for the odd-ball DVD she gets from Germany and figured it would make more sense to try to rip it for playback on other devices. Be it a computer or to burn on a new disk. We’ve tried Hand Break, but that doesn’t seem to work.

Again, to be clear, it needs to be able to bypass the region codes that restrict playback on devices in certain parts of the world. This is the particular issue we’re trying to overcome.

I’m a Jaws user, so anything that’s accessible would be preferred. Really though, just looking for something that will do the job.

Thanks,

Cristóbal


Links in Footnotes No Longer Have the Underline nor are They Announced "Link" in MS Word 2016 with JAWS 2019

Richard B. McDonald
 

Hi!

 

Once I began editing my Word document in MS Word 2016 after starting it in MS Word 2007, it seems that the format for a link within a footnote (at least there) are not the same.  The links created in 2007 are blue with a single underlined and JAWS announces “link” when I navigate to it, all as expected.  However, the newest links I created in 2016 are not underlined nor does JAWS announce “link.”  They are blue, though.

 

Does anyone else have this problem?  Does anyone know how to make the format and JAWS behavior for my 2016 links like those for my 2007 links?

 

Thanks,

Richard


Jaws accessible program to rip region coded DVD

Cristóbal
 

Hello list,

I’m in search of a program that can rip DVDs with region codes. Is anyone aware of such a thing? The wife and I had a region code free DVD player for years, but that thing has long since died. We don’t want to buy a new DVD player for the odd-ball DVD she gets from Germany and figured it would make more sense to try to rip it for playback on other devices. Be it a computer or to burn on a new disk. We’ve tried Hand Break, but that doesn’t seem to work.

Again, to be clear, it needs to be able to bypass the region codes that restrict playback on devices in certain parts of the world. This is the particular issue we’re trying to overcome.

I’m a Jaws user, so anything that’s accessible would be preferred. Really though, just looking for something that will do the job.

Thanks,

Cristóbal


Re: Taking out Hard and soft page breaks in Notepad after copying and pasting text

Bill White <billwhite92701@...>
 

Hi, Sharon. To remove special characters with the Find/Replace in Notepad:

for page breaks type ^p in the Find box; for paragraph breaks use ^m

The Caret is the number six on the numbers row with the Shift key.

In the Replace box don't type anything. Then TAB and click Replace All to
remove all page or paragraph breaks

Bill White

billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sharon
Sent: Tuesday, November 20, 2018 11:58 AM
To: main@jfw.groups.io
Subject: Taking out Hard and soft page breaks in Notepad after copying and
pasting text

Anyone know the keystrokes to do this in the replace all dialogue box?
Sharon


Re: How do I close the "smart lookup" pane in MS Word 2016 using JAWS 2019?

Richard B. McDonald
 

Many thanks Ann!

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Tuesday, November 20, 2018 11:24 AM
To: main@jfw.groups.io
Subject: Re: How do I close the "smart lookup" pane in MS Word 2016 using
JAWS 2019?

To close a pane,
1. press ctrl+spacebar (this opens a menu) 2. Arrow up or down to close.
3. press enter.