Hey guys,

OK, i'm having a very strange problem, that i need some help with.

Noone can seem to come up with the anser, but it's driving me crazy.

I use a program to program radios called contact manager.  The long and short of it is, i have to add channels to a particular zone in the radio.  I can access the zones and the channels.  I can get to the zone in the radio, and access the channels that i need to add.  The way i did it in the past on my old laptop, i go to the channel that i want to add, route jaws to pc, and do a right mouse click.  Now when i route the jaws to PC, if you're looking at it visually on the screen, the cursor jumps up several places on the screen and as a result it highlights the wrong channel.  This never use to happen on my other laptop. I'm running the same version of the software as well as the same version  of jaws on both machines, both running win 10.  I can't think of anything that would make this happen.

Today, we shut down jaws, and i had someone just do a right mouse click on the right channel, and the cursor didn't jump up several places, it highlighted the correct channel.  Any ideas here guys?

Thanks,

Jed

I’m curious, if people use Flexible Web, where they use it.  I used it a bit when the feature was first available, but lost interest because of what I perceived to be the effort involved and the little gain.  Mostly, I was using it on newspaper sites, and with Firefox and Edge containing Reading Views, and thanks to the Mercury Reader add-on for Chrome, so does it, those browser-based features seem to obviate the need for Flexible Web.  But am I misanalyzing this? 

Dean

Thought-provoking reading: http://bahaiteachings.org

Hi folks,

In Windows 7 and before I always found the Dvorak keyboard in Control
Panel in something like Languages or Keyboard or something loosely
related to that. But in Windows 10 the search boxes don't find it.
Anybody know where it's hidden now?

Thanks,

--

Lee Maschmeyer

"Never imagine yourself not to be otherwise than what it might appear to
others that what you were or might have been was not otherwise than what
you had been would have appeared to them to be otherwise."
--Lewis Carroll

Hi - In my new job, I attend tons of meetings, have to take loads of notes,
and from those notes, keep an active list of action items. There are many
topics to keep track of, and when it gets real busy, I can lose track of
everything on my plate. Wondering how other professionals deal with this
kind of working situation. What I do now is keep several MS Word documents
as notebooks. Each time I attend a meeting, I open the appropriate Word
file, enter a new heading (easy to search for later with navigation quick
keys) and then start taking notes. If something comes up that I need to get
onto my to-do list, I put 3 asterisks there so I can search quickly for
those items later, and transfer them to my to-do list. I'm finding though
that when it gets busy, I don't always go back to the Word file and pull
those to-do items out and add them to my task list (in Outlook).
I messed around this afternoon with OneNote, but didn't find it very user
friendly with Jaws. Maybe I just don't know how to use it well. I've used it
in the past with the OneNote Blind scripts, but found them problematic after
a while and switched to the Word file notebook system above.
Any other apps or ideas for doing this kind of work with Jaws? Needs to be
efficient and easy to learn.
Thanks.
-Amy

Hi Alison,

To expand on this post, Control+1 goes to Email, Control+2 to contacts and Control+3 to calendar from wherever you are in Outlook.

All the best

Steve

Thank you very much; this is exactly what I needed to know, that is, how to return to my e-mails.

Alison

Allison,

Do you mean that you want to return to Mail from Calendar?  If this is the case, then Control 1 will take you back to your inbox.  Also, Control Shift I will take you to the Inbox from wherever you are in Outlook. 

When in Calendar, is there any way of exiting without exiting Outlook?

Alison

Using latest 1803 version, Jaws 2019 and MS office 2016, what is the most efficient and Jaws friendly way to search the calendar for a past appointment? Used to do this on Office 2010 and have not since updating to Office 2016 but old way does not produce the same results. Googled this but did not find any good answered so before doing more advanced searches figured I’d check with the list.

Al

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.

Thank you very much; this is exactly what I needed to know, that is, how to return to my e-mails.

Alison

Allison,

Do you mean that you want to return to Mail from Calendar?  If this is the case, then Control 1 will take you back to your inbox.  Also, Control Shift I will take you to the Inbox from wherever you are in Outlook. 

When in Calendar, is there any way of exiting without exiting Outlook?

Alison

Using latest 1803 version, Jaws 2019 and MS office 2016, what is the most efficient and Jaws friendly way to search the calendar for a past appointment? Used to do this on Office 2010 and have not since updating to Office 2016 but old way does not produce the same results. Googled this but did not find any good answered so before doing more advanced searches figured I’d check with the list.

Al

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.

i don't even know how to navigate with narrator cause i literally never use
it.
1 of the things i need to get to, when i open up this program, there
are a bunch of tabs across the top. In order to get to them, i use to
route jaws to PC, then go around and find them. i was gonna do it
with n v d a, but don't even know if nvda has another cursor cause i
hardly use it. trying to figure out whether it's a jaws problem, or a
windows problem. It's driving me crazy.

On 11/18/18, Ann Byrne <annakb@sbcglobal.net> wrote:

Try it with Narrator. That isn't the answer, but might be a short
term solution.
At 02:46 PM 11/18/2018, you wrote:

Hey guys,

OK, i'm having a very strange problem, that i need some help with.
Noone can seem to come up with the anser, but it's driving me crazy.
I use a program to program radios called contact manager. The long
and short of it is, i have to add channels to a particular zone in the
radio. I can access the zones and the channels. I can get to the
zone in the radio, and access the channels that i need to add. The
way i did it in the past on my old laptop, i go to the channel that i
want to add, route jaws to pc, and do a right mouse click. Now when i
route the jaws to PC, if you're looking at it visually on the screen,
the cursor jumps up several places on the screen and as a result it
highlights the wrong channel. This never use to happen on my other
laptop. I'm running the same version of the software as well as the
same version of jaws on both machines, both running win 10. I can't
think of anything that would make this happen.
Today, we shut down jaws, and i had someone just do a right mouse
click on the right channel, and the cursor didn't jump up several
places, it highlighted the correct channel. Any ideas here guys?

Thanks,
Jed

Richard,

F6 works for me too, but Word Count may not show up if it wasn’t checked after getting to the Status Bar settings with F6 and then doing shift+f10 to bring up the context menu and checking things like Word count, column, (which I find helpful as it tells you how far across the line you are, etc.

If you cannot get there with f6, alt+r then w will give you the word count, or it should anyway.

Richard T.

F6 works for me in current Microsoft Word for Office 365 with JAWS 2019. Alternatively, you can use Insert+Numpad-3 to read the status line.

Hi!

I seem to remember that pressing F6 would cycle me around the ribbon, document pane, status bar and so on.  Now, when I press F6 all I hear is “document pane.”  I want to get to the status bar so I can check on some statistics (e.g., number of words) in my document.  How do I get there?

Thanks,

Richard

 

hi.

 

Absolutely right!

A piece of crap...

 

More and more confusion of installations that do not work and always with system issues support.

Sorry but I have to say:
Nvda never fails.
cheers.

 

Às 15:10 de 17/11/2018, Richard Turner escreveu:

In my very humble but opinionated opinion, Jaws 2019 is buggy as hell.  I’ve gone back to using 2018 and will wait for the update to 2019 to see if they fix anything.

I’ve mentioned some of the issues I’ve had on this list, so won’t waste anyones time rehashing them.

 

Richard

 

 

 

“Definition of an expert: An ex is a has-been and a spirt is a drip under pressure.” – Bruce U. Utah Phillips

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ashleigh Piccinino
Sent: Saturday, November 17, 2018 7:03 AM
To: main@jfw.groups.io
Cc: win10@win10.groups.io
Subject: JAWS 2019 and Microsoft Word not working properly together
Importance: High

 

Hello all,

     Just now, I found that JAWS 2019 and Microsoft Word won’t work together nicely in some aspects. When I’m reading a document, of my own making, JAWS misses some words at times and repeats others—almost as if it’s wrapping up a few phrases/words. I have the document maximized when I’m reading with “say all.” Is there anything I can do to prevent this from happening? It doesn’t happen with JAWS 2018 as I’ve checked.

Thank you,

Ashleigh Piccinino

 

Sent from Mail for Windows 10

 

-- 

A acção pode nem sempre ser felicidade, mas não há felicidade sem acção...

The new upgrade either going to be in early DECEMBER or first week of January. 

Haven’t noticed with windows 10. 

Can you compare your JAWS quick settings (insert+v)
setting-by-setting to be sure everything is set the same way on both
computers?
At 08:06 PM 11/18/2018, you wrote:

Nope, it's not the touch pad, cause i'm using an external keyboard.
Any other ideas, this just doesn't make any sense. Could it be a
repair issue?
Nothing is obvious at all. The window is maximized as well.

On 11/18/18, Tim Ford <ttford@gmail.com> wrote:

This may be a long shot, but if your new laptop has a touchpad, you may
be
grazing it when you do that keystroke combination. This happened to me
until I turned off the touchpad.





From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mike
B.
Sent: Sunday, November 18, 2018 3:14 PM
To: main@jfw.groups.io
Subject: Re: a big cursor problem



Hi Jed,



Did you make sure that the window is maximized?

Take care. Go Rams!
Sent from my iBarstool.
I type out everything I want to remember. That way instead of

spending a lot

of time trying to remember what it was, I spend the time looking

for where I

saved it!

----- Original Message -----

From: Jed Barton <mailto:jedbarton@gmail.com>

To: main@jfw.groups.io

Sent: Sunday, November 18, 2018 2:24 PM

Subject: Re: a big cursor problem



this issue is driving me crazy. It baffles me why this is even
happening. This program has worked flawlessly for years, and now
since i switched laptops, running the same program, and jaws, why when
i do this particular action, the cursor just by some sort of magic,
moves up several spaces. It makes no sense to me. Bottom line, i
need to get this working. If anyone has any ideas, that would be
enormously helpful Like i said, it just makes no sense, why when i
route jaws to PC, the cursor would just move up a few spaces, and
highlight the wrong item. is there any way to do some sort of jaws
repair?

On 11/18/18, Jed Barton <jedbarton@gmail.com> wrote:

i don't even know how to navigate with narrator cause i literally
never
use
it.
1 of the things i need to get to, when i open up this program, there
are a bunch of tabs across the top. In order to get to them, i use to
route jaws to PC, then go around and find them. i was gonna do it
with n v d a, but don't even know if nvda has another cursor cause i
hardly use it. trying to figure out whether it's a jaws problem, or a
windows problem. It's driving me crazy.

On 11/18/18, Ann Byrne <annakb@sbcglobal.net> wrote:

Try it with Narrator. That isn't the answer, but might be a short
term solution.
At 02:46 PM 11/18/2018, you wrote:

Hey guys,

OK, i'm having a very strange problem, that i need some help with.
Noone can seem to come up with the anser, but it's driving me crazy.
I use a program to program radios called contact manager. The long
and short of it is, i have to add channels to a particular zone in
the
radio. I can access the zones and the channels. I can get to the
zone in the radio, and access the channels that i need to add. The
way i did it in the past on my old laptop, i go to the channel that i
want to add, route jaws to pc, and do a right mouse click. Now when
i
route the jaws to PC, if you're looking at it visually on the screen,
the cursor jumps up several places on the screen and as a result it
highlights the wrong channel. This never use to happen on my other
laptop. I'm running the same version of the software as well as the
same version of jaws on both machines, both running win 10. I can't
think of anything that would make this happen.
Today, we shut down jaws, and i had someone just do a right mouse
click on the right channel, and the cursor didn't jump up several
places, it highlighted the correct channel. Any ideas here guys?

Thanks,
Jed

Nope, it's not the touch pad, cause i'm using an external keyboard.
Any other ideas, this just doesn't make any sense. Could it be a
repair issue?
Nothing is obvious at all. The window is maximized as well.

On 11/18/18, Tim Ford <ttford@gmail.com> wrote:

This may be a long shot, but if your new laptop has a touchpad, you may be
grazing it when you do that keystroke combination. This happened to me
until I turned off the touchpad.





From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mike B.
Sent: Sunday, November 18, 2018 3:14 PM
To: main@jfw.groups.io
Subject: Re: a big cursor problem



Hi Jed,



Did you make sure that the window is maximized?

Take care. Go Rams!
Sent from my iBarstool.
I type out everything I want to remember. That way instead of

spending a lot

of time trying to remember what it was, I spend the time looking

for where I

saved it!

----- Original Message -----

From: Jed Barton <mailto:jedbarton@gmail.com>

To: main@jfw.groups.io

Sent: Sunday, November 18, 2018 2:24 PM

Subject: Re: a big cursor problem



this issue is driving me crazy. It baffles me why this is even
happening. This program has worked flawlessly for years, and now
since i switched laptops, running the same program, and jaws, why when
i do this particular action, the cursor just by some sort of magic,
moves up several spaces. It makes no sense to me. Bottom line, i
need to get this working. If anyone has any ideas, that would be
enormously helpful Like i said, it just makes no sense, why when i
route jaws to PC, the cursor would just move up a few spaces, and
highlight the wrong item. is there any way to do some sort of jaws
repair?

On 11/18/18, Jed Barton <jedbarton@gmail.com> wrote:

i don't even know how to navigate with narrator cause i literally never
use
it.
1 of the things i need to get to, when i open up this program, there
are a bunch of tabs across the top. In order to get to them, i use to
route jaws to PC, then go around and find them. i was gonna do it
with n v d a, but don't even know if nvda has another cursor cause i
hardly use it. trying to figure out whether it's a jaws problem, or a
windows problem. It's driving me crazy.

On 11/18/18, Ann Byrne <annakb@sbcglobal.net> wrote:

Try it with Narrator. That isn't the answer, but might be a short
term solution.
At 02:46 PM 11/18/2018, you wrote:

Hey guys,

OK, i'm having a very strange problem, that i need some help with.
Noone can seem to come up with the anser, but it's driving me crazy.
I use a program to program radios called contact manager. The long
and short of it is, i have to add channels to a particular zone in the
radio. I can access the zones and the channels. I can get to the
zone in the radio, and access the channels that i need to add. The
way i did it in the past on my old laptop, i go to the channel that i
want to add, route jaws to pc, and do a right mouse click. Now when i
route the jaws to PC, if you're looking at it visually on the screen,
the cursor jumps up several places on the screen and as a result it
highlights the wrong channel. This never use to happen on my other
laptop. I'm running the same version of the software as well as the
same version of jaws on both machines, both running win 10. I can't
think of anything that would make this happen.
Today, we shut down jaws, and i had someone just do a right mouse
click on the right channel, and the cursor didn't jump up several
places, it highlighted the correct channel. Any ideas here guys?

Thanks,
Jed

This may be a long shot, but if your new laptop has a touchpad, you may be
grazing it when you do that keystroke combination. This happened to me
until I turned off the touchpad.





From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mike B.
Sent: Sunday, November 18, 2018 3:14 PM
To: main@jfw.groups.io
Subject: Re: a big cursor problem



Hi Jed,



Did you make sure that the window is maximized?

Take care. Go Rams!
Sent from my iBarstool.
I type out everything I want to remember. That way instead of spending a lot
of time trying to remember what it was, I spend the time looking for where I
saved it!

----- Original Message -----

From: Jed Barton <mailto:jedbarton@gmail.com>

To: main@jfw.groups.io

Sent: Sunday, November 18, 2018 2:24 PM

Subject: Re: a big cursor problem



this issue is driving me crazy. It baffles me why this is even
happening. This program has worked flawlessly for years, and now
since i switched laptops, running the same program, and jaws, why when
i do this particular action, the cursor just by some sort of magic,
moves up several spaces. It makes no sense to me. Bottom line, i
need to get this working. If anyone has any ideas, that would be
enormously helpful Like i said, it just makes no sense, why when i
route jaws to PC, the cursor would just move up a few spaces, and
highlight the wrong item. is there any way to do some sort of jaws
repair?

On 11/18/18, Jed Barton <jedbarton@gmail.com> wrote:

i don't even know how to navigate with narrator cause i literally never
use
it.
1 of the things i need to get to, when i open up this program, there
are a bunch of tabs across the top. In order to get to them, i use to
route jaws to PC, then go around and find them. i was gonna do it
with n v d a, but don't even know if nvda has another cursor cause i
hardly use it. trying to figure out whether it's a jaws problem, or a
windows problem. It's driving me crazy.

On 11/18/18, Ann Byrne <annakb@sbcglobal.net> wrote:

Try it with Narrator. That isn't the answer, but might be a short
term solution.
At 02:46 PM 11/18/2018, you wrote:

Hey guys,

OK, i'm having a very strange problem, that i need some help with.
Noone can seem to come up with the anser, but it's driving me crazy.
I use a program to program radios called contact manager. The long
and short of it is, i have to add channels to a particular zone in the
radio. I can access the zones and the channels. I can get to the
zone in the radio, and access the channels that i need to add. The
way i did it in the past on my old laptop, i go to the channel that i
want to add, route jaws to pc, and do a right mouse click. Now when i
route the jaws to PC, if you're looking at it visually on the screen,
the cursor jumps up several places on the screen and as a result it
highlights the wrong channel. This never use to happen on my other
laptop. I'm running the same version of the software as well as the
same version of jaws on both machines, both running win 10. I can't
think of anything that would make this happen.
Today, we shut down jaws, and i had someone just do a right mouse
click on the right channel, and the cursor didn't jump up several
places, it highlighted the correct channel. Any ideas here guys?

Thanks,
Jed

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sharon Klug
Sent: Saturday, November 17, 2018 12:12 PM
To: main@jfw.groups.io
Subject: update problem with jaws 18 and display

Hello everyone:

I need help with a jaws problem. I did the update yesterday for jaws 18 on a 64 bit machine. After installation and even after rebooting I get the following message.

The Freedom Scientific Accessibility display driver is not properly installed. Please reboot the computer if you have not done so already. If this does not fix the issue, please run a repair on the JAWS installation to reinstall the display driver.

To perform a repair, run the JAWS setup package with the command-line arguments "/Type Repair".
OK

I don't understand how to do what the message tells me to do. I hope someone can help me and, if so, thanks in advance.
Sharon