Date   

Re: Alternative disk management software accessible using a screen-reader

Steve Matzura
 

Oh yeah, CLEAN will do it, too.


But why oh why does it not say you have a 64GB drive? You're abso-tively posi-lutely sure it's really a 64GB drive and you didn't mix it up with another one? That's just so so odd.

On 10/30/2018 5:43 AM, Dave Durber wrote:
Hello John:

Following several searches on line, for instructions on how to delete a partition/volume on a USB memory stick, several of which suggested I type the command line:

delete partition

When I tried this command, Windows displayed the message:

No drive is selected.

Then I came across a sight which suggested the command:

clean

which did the trick

Once I closed DiskPart and closed the CMD window, I used the partition and format manager to see if the entire 64 GB was now available as . unalocated space.

I'm sorry to say, for me anyway, the only unalocated space available, was 8 GB.

So, it looks like the rest of the available space between 8 GB an 64 GB no longer exists, that is as far as Windows is concerned.

So, I am off to search for another 64 GB memory stick at a good discounted price.

Thank you to everyone who has tried to help me with this problem.

Dave Durber


Re: Jaws 2019 has been released

Soronel Haetir
 

So is it just me or is this year's offering particularly meager?
(Remember, with the unified setup package it has to download the rest
during install rather than when downloading the setup file). The only
item I find at all useful is the faster startup time.

On 10/30/18, Sieghard Weitzel <sieghard@live.ca> wrote:
The Jaws 2019 public beta cycle has ended and Jaws 2019 is now available for
everybody, note you will need an SMA with at least 1 upgrade remaining to
authorize Jaws 2019 for unrestricted use.

Here are a couple of the more noteworthy changes:

New Consolidated Setup Package
Starting with JAWS 2019, there is now one link to download and install JAWS
for all supported operating systems and languages. You no longer have to
choose the correct setup executable based on your system as well as which
language you need.
When you begin the setup, the installer automatically detects whether you
are using 32 or 64-bit and installs the correct components. If you are doing
a new install and you want to use a different language other than the
default for your operating system, select the Options button on the first
installation screen and then choose a language. If you are updating an
existing installation, the Options button is not available as JAWS detects
the language already installed and updates using the same language.

I would add that because of this change the new Jaws 2019 installer file is
a mere 23.5 Mb instead of the previous installers which were around 180 Mb.
You can still download an offline installer and here you do have to pick the
correct one, 32 Bit or 64 Bit, and that installer contains all OCR
components and so on and it is well over 500 Mb.

The JAWS Audio Ducking feature is now supported in the Windows 10 Spring
2018 Creators update (version 1803) and higher. Audio Ducking causes the
volume
of other programs to be lowered while JAWS is speaking. For example, if you
are listening to music and JAWS begins talking, the volume of the music will
be slightly lowered so you can comfortably hear JAWS and then raised back to
its current level when JAWS stops talking.
By default, audio remains at the same level as JAWS speech. To enable Audio
Ducking, open the Startup Wizard from the JAWS Help menu and select the
"Lower the volume of other programs while JAWS is speaking" checkbox located
on the Speech Settings page. Alternatively, Audio Ducking can be turned on
through Settings center.

Finally this feature works as it does on the iPhone and it's fantastic that
now when you open a website where some annoying and often loud video begins
to play you can still hear Jaws as you try to find the buttons to stop it.

Faster JAWS Startup with Grace Period Authorization
JAWS 2019 introduces a new concept to help ease the delay in response when
JAWS first launches and looks for authorization. In prior versions, JAWS
would not fully start until proper authorization was found. Since
Authorization can include searching for a network license, the amount of
time before JAWS started speaking could be significant. While it is not
possible to speed up this period directly, the authorization process will
now be completed simultaneously
to startup. As JAWS searches for authorization, it enters a new "grace
period" authorization state which provides limited functionality, similar to
what is available on the logon screen, so you can use speech and braille
while authorization discovery takes place. Once the authorization check has
finished, JAWS then uses the correct feature set based on the license.

There are many more features all of which you can read about by activating
the following link and then just use heading quick keys to find the What's
New section and read about each new feature.
What's New in JAWS 2019 Screen Reading
Software<https://www.freedomscientific.com/Downloads/jaws/JAWSWhatsNew>

Click Jaws
2019.1810.64<http://jaws2019.vfo.digital/2019.1810.64.400/0E3EB9D1-CBAD-47FA-8854-10A0CA074F4B/J2019.1810.64-any.exe>
to download the universal installer, the following information is given on
that page:
Note: This installer requires an internet connection. If you need to install
JAWS on a system that does not have an internet connection, follow the link
below to the offline installer for secure environments.

If you want one of the offline installers, go to the Offline Installers for
Secure Environments
page<https://www.freedomscientific.com/Downloads/OfflineInstallers#jaws> to
find the one for your system, use heading quick nav keys since there are
also instructions to create an offline installer package using the new
installer package.

Best regards,
Siegharrd




--
Soronel Haetir
soronel.haetir@gmail.com


Jaws 2019 has been released

 

The Jaws 2019 public beta cycle has ended and Jaws 2019 is now available for everybody, note you will need an SMA with at least 1 upgrade remaining to authorize Jaws 2019 for unrestricted use.

 

Here are a couple of the more noteworthy changes:

 

New Consolidated Setup Package

Starting with JAWS 2019, there is now one link to download and install JAWS for all supported operating systems and languages. You no longer have to choose the correct setup executable based on your system as well as which language you need.

When you begin the setup, the installer automatically detects whether you are using 32 or 64-bit and installs the correct components. If you are doing a new install and you want to use a different language other than the default for your operating system, select the Options button on the first installation screen and then choose a language. If you are updating an existing installation, the Options button is not available as JAWS detects the language already installed and updates using the same language.

 

I would add that because of this change the new Jaws 2019 installer file is a mere 23.5 Mb instead of the previous installers which were around 180 Mb.

You can still download an offline installer and here you do have to pick the correct one, 32 Bit or 64 Bit, and that installer contains all OCR components and so on and it is well over 500 Mb.

 

The JAWS Audio Ducking feature is now supported in the Windows 10 Spring 2018 Creators update (version 1803) and higher. Audio Ducking causes the volume

of other programs to be lowered while JAWS is speaking. For example, if you are listening to music and JAWS begins talking, the volume of the music will be slightly lowered so you can comfortably hear JAWS and then raised back to its current level when JAWS stops talking.

By default, audio remains at the same level as JAWS speech. To enable Audio Ducking, open the Startup Wizard from the JAWS Help menu and select the "Lower the volume of other programs while JAWS is speaking" checkbox located on the Speech Settings page. Alternatively, Audio Ducking can be turned on through Settings center.

 

Finally this feature works as it does on the iPhone and it’s fantastic that now when you open a website where some annoying and often loud video begins to play you can still hear Jaws as you try to find the buttons to stop it.

 

Faster JAWS Startup with Grace Period Authorization

JAWS 2019 introduces a new concept to help ease the delay in response when JAWS first launches and looks for authorization. In prior versions, JAWS would not fully start until proper authorization was found. Since Authorization can include searching for a network license, the amount of time before JAWS started speaking could be significant. While it is not possible to speed up this period directly, the authorization process will now be completed simultaneously

to startup. As JAWS searches for authorization, it enters a new "grace period" authorization state which provides limited functionality, similar to what is available on the logon screen, so you can use speech and braille while authorization discovery takes place. Once the authorization check has finished, JAWS then uses the correct feature set based on the license.

 

There are many more features all of which you can read about by activating the following link and then just use heading quick keys to find the What’s New section and read about each new feature.

What's New in JAWS 2019 Screen Reading Software

 

Click Jaws 2019.1810.64 to download the universal installer, the following information is given on that page:

Note: This installer requires an internet connection. If you need to install JAWS on a system that does not have an internet connection, follow the link below to the offline installer for secure environments.

 

If you want one of the offline installers, go to the Offline Installers for Secure Environments page to find the one for your system, use heading quick nav keys since there are also instructions to create an offline installer package using the new installer package.

 

Best regards,

Siegharrd

 


Jaws 2018 Window Media Player version 13 Problem rip audio artist cd without automatic rips

O.Addison Gethers
 

Hello All I have desktop computer with window 10 ,usingand Jaws 2018 !! I have window media player when I put audio artist cd in drive the music began to play so I press ctrl S to stop  then when I press tab key it’s say help button then press tab it’s have the artist name with song 1 thru 12 when I heard number 1 is not check I press spacebar to check thru 12 songs name then I press tab it’s say save rip cdbutton then press tab again it’s say rip menu  !! I don’t even hear it say start rip button  when I keep tabbing down ,Does anyone know how I can get cd rips so it can get into  library or something? I’m getting confuse with this ,that’s why I didn’t want automatic rips  at all!! I need some helps here.When I open my music folder the artist that I’m trying to rips is not there from window media player to library!!

Addison

 




Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com



Re: Alternative disk management software accessible using a screen-reader

Dave Durber
 

Hello John:

I did select the drive first, before using the "Clean" command.

I am not going to waste any more time trying to recover the lost drive space, I'll use the memory stick as a Windows installation disk.

Dave Durber----- Original Message -----
From: "John Covici" <covici@ccs.covici.com>
To: <main@jfw.groups.io>
Sent: Tuesday, October 30, 2018 12:23 PM
Subject: Re: Alternative disk management software accessible using a screen-reader


You have to select the drive first and then the partition if there is
more than one and then you can delete it. Do help while you are in
diskpart for more information.

On Tue, 30 Oct 2018 05:43:24 -0400,
Dave Durber wrote:

Hello John:

Following several searches on line, for instructions on how to
delete a partition/volume on a USB memory stick, several of which
suggested I type the command line:

delete partition

When I tried this command, Windows displayed the message:

No drive is selected.

Then I came across a sight which suggested the command:

clean

which did the trick

Once I closed DiskPart and closed the CMD window, I used the
partition and format manager to see if the entire 64 GB was now
available as . unalocated space.

I'm sorry to say, for me anyway, the only unalocated space
available, was 8 GB.

So, it looks like the rest of the available space between 8 GB an
64 GB no longer exists, that is as far as Windows is concerned.

So, I am off to search for another 64 GB memory stick at a good
discounted price.

Thank you to everyone who has tried to help me with this problem.

Dave Durber

----- Original Message ----- From: "John Covici"
<covici@ccs.covici.com>
To: <main@jfw.groups.io>
Sent: Sunday, October 28, 2018 1:39 PM
Subject: Re: Alternative disk management software accessible
using a screen-reader


What did not work with diskpart?

On Sun, 28 Oct 2018 00:34:29 -0400,
Dave Durber wrote:

Hello everyone:

as the subject says, I am looking for such software to try and
delete the existing partition on my USB memory stick and return
it to its full size of 64 GB.

I have tried using the Disk Partition and Formatting program
which comes with Windows and the command line DiskPart program
with no success.

So, I am hoping that someone can suggest an alternative program
for me to try.

Thanks in anticipation for any suggestions.

Dave Durber





--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com




--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Re: Remote connections:

Milton Ota <mota1252@...>
 

Hello,
I believe that to use the remote connection with NVDA copies of the program must be running on both machines.

I have been thinking about this a little more and a possibility is Remote Incident Manager from Sero Tek which is a subscription based program and the System Access speech program does not have to be the primary screen reader. I would give them a call at 866-202-0520 and talk with them.

Original message:

Jonas,
Does NVDA Remote require NVDA to be installed on both computers?
Pam

________________________________________
From: main@jfw.groups.io [main@jfw.groups.io] on behalf of Jonas Voll [jonas.voll@envisionus.com]
Sent: Tuesday, October 30, 2018 8:47 AM
To: main@jfw.groups.io
Subject: Re: Remote connections:
If I was you I look at the NVDA remote!

Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
https://na01.safelinks.protection.outlook.com/?url=www.envisionus.com&;data=02%7C01%7Cpamela.a.ekstrand.-nd%40disney.com%7Cf9d1edad59dd4fcc8ba508d63e65ea6b%7C56b731a8a2ac4c32bf6b616810e913c6%7C1%7C0%7C636765004784470535&amp;sdata=x3IjcE804Jw4rNOKNRcKlUNAfjPXfJ%2BXpmsl0OgITww%3D&amp;reserved=0
Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research.
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Monday, October 29, 2018 3:32 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:
I don't think there is any way to do that. They need Jaws on the other end of the connection. If this is a job, maybe your employer would pay for Aira.
On Mon, 29 Oct 2018 15:29:17 -0400,
charleseblack@att.net wrote:
Afternoon:
I can work as an IT resource for a non-profit organization. I will
need to remote into several machines to achieve my job. Is there a
tool which will allow me to, using jaws, remote into several systems,
achieve the task needed, and then to allow the person to continue
their work? I wish to do this remotely. Would VPN allow that to
happen? Is there a way to achieve this without having JAWS on the
other end; at least in the employee's systems? Thanks!
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 1:50 PM
To: main@jfw.groups.io
Subject: Re: OCR
Thanks.






From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR


Ed,


If you have any questions on any of the layered commands, do the following:


JAWS+Spacebar
Then press the Question Mark Key
This will give you a general listing of layered commands and what they
do


Or, JAWS+Spacebar
then press one of the layered commands such as O, H, etc.
then press the question mark key.
This will give you specific options for that layered command.


Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer




----- Original Message -----
From: Ed Legge <mailto:edward.legge@gmail.com>
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Sent: Monday, October 29, 2018 10:33
Subject: Re: OCR


Thanks.




From: main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of John
Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: OCR


JAWS key plus space bar, then o, then d.


HTH,






John Doering
Administrative Pricing Asst


p. 4147783040 Extn:4063 t. 800-642-8778


NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you
are not the intended recipient, nor the employee or agent responsible
for delivering this message in confidence to the intended
recipient(s), you are hereby notified that you have received this
transmittal in error, and any review, dissemination, distribution or
copying of this transmittal or its attachments is strictly prohibited.
If you have received this transmittal and/or attachments in error,
please notify me immediately by reply e-mail and then delete this message, including any attachments.
From: main@jfw.groups.io <mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io <mailto:jfw@groups.io> >
Subject: OCR


What is the command for getting JAWS to read a PDF file with OCR?








--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?
John Covici wb2una
covici@ccs.covici.com



SonicWall identified this message as clean.
To manage your junk mail go to https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fnospam.envisionus.com&;data=02%7C01%7Cpamela.a.ekstrand.-nd%40disney.com%7Cf9d1edad59dd4fcc8ba508d63e65ea6b%7C56b731a8a2ac4c32bf6b616810e913c6%7C1%7C0%7C636765004784480540&amp;sdata=G6D%2BBOZDvYqWp2%2BuzN7NpG3Xlr83xUHXVa89%2FmZPtvw%3D&amp;reserved=0 and logon with your domain userid and password.
If you consider this email to be spam please forward it to 'spam@nospam.envisionus.com'
NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.




Re: Remote connections:

Milton Ota <mota1252@...>
 

Hello,
I believe that to use the remote connection with NVDA copies of the program must be running on both machines.

I have been thinking about this a little more and a possibility is Remote Incident Manager from Sero Tek which is a subscription based program and the System Access speech program does not have to be the primary screen reader. I would give them a call at 866-202-0520 and talk with them.

Original message:

Jonas,
Does NVDA Remote require NVDA to be installed on both computers?
Pam

________________________________________
From: main@jfw.groups.io [main@jfw.groups.io] on behalf of Jonas Voll [jonas.voll@envisionus.com]
Sent: Tuesday, October 30, 2018 8:47 AM
To: main@jfw.groups.io
Subject: Re: Remote connections:
If I was you I look at the NVDA remote!

Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
https://na01.safelinks.protection.outlook.com/?url=www.envisionus.com&;data=02%7C01%7Cpamela.a.ekstrand.-nd%40disney.com%7Cf9d1edad59dd4fcc8ba508d63e65ea6b%7C56b731a8a2ac4c32bf6b616810e913c6%7C1%7C0%7C636765004784470535&amp;sdata=x3IjcE804Jw4rNOKNRcKlUNAfjPXfJ%2BXpmsl0OgITww%3D&amp;reserved=0
Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research.
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Monday, October 29, 2018 3:32 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:
I don't think there is any way to do that. They need Jaws on the other end of the connection. If this is a job, maybe your employer would pay for Aira.
On Mon, 29 Oct 2018 15:29:17 -0400,
charleseblack@att.net wrote:
Afternoon:
I can work as an IT resource for a non-profit organization. I will
need to remote into several machines to achieve my job. Is there a
tool which will allow me to, using jaws, remote into several systems,
achieve the task needed, and then to allow the person to continue
their work? I wish to do this remotely. Would VPN allow that to
happen? Is there a way to achieve this without having JAWS on the
other end; at least in the employee's systems? Thanks!
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 1:50 PM
To: main@jfw.groups.io
Subject: Re: OCR
Thanks.






From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR


Ed,


If you have any questions on any of the layered commands, do the following:


JAWS+Spacebar
Then press the Question Mark Key
This will give you a general listing of layered commands and what they
do


Or, JAWS+Spacebar
then press one of the layered commands such as O, H, etc.
then press the question mark key.
This will give you specific options for that layered command.


Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer




----- Original Message -----
From: Ed Legge <mailto:edward.legge@gmail.com>
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Sent: Monday, October 29, 2018 10:33
Subject: Re: OCR


Thanks.




From: main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of John
Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: OCR


JAWS key plus space bar, then o, then d.


HTH,






John Doering
Administrative Pricing Asst


p. 4147783040 Extn:4063 t. 800-642-8778


NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you
are not the intended recipient, nor the employee or agent responsible
for delivering this message in confidence to the intended
recipient(s), you are hereby notified that you have received this
transmittal in error, and any review, dissemination, distribution or
copying of this transmittal or its attachments is strictly prohibited.
If you have received this transmittal and/or attachments in error,
please notify me immediately by reply e-mail and then delete this message, including any attachments.
From: main@jfw.groups.io <mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io <mailto:jfw@groups.io> >
Subject: OCR


What is the command for getting JAWS to read a PDF file with OCR?








--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?
John Covici wb2una
covici@ccs.covici.com



SonicWall identified this message as clean.
To manage your junk mail go to https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fnospam.envisionus.com&;data=02%7C01%7Cpamela.a.ekstrand.-nd%40disney.com%7Cf9d1edad59dd4fcc8ba508d63e65ea6b%7C56b731a8a2ac4c32bf6b616810e913c6%7C1%7C0%7C636765004784480540&amp;sdata=G6D%2BBOZDvYqWp2%2BuzN7NpG3Xlr83xUHXVa89%2FmZPtvw%3D&amp;reserved=0 and logon with your domain userid and password.
If you consider this email to be spam please forward it to 'spam@nospam.envisionus.com'
NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.




Re: Alternative disk management software accessible using a screen-reader

Dave Durber
 

Hello William:

DiskPart, is included with your installation of Windows.

Dave Durber

----- Original Message -----
From: "William Vandervest" <timelord09@comcast.net>
To: <main@jfw.groups.io>
Sent: Tuesday, October 30, 2018 1:32 PM
Subject: Re: Alternative disk management software accessible using a screen-reader


Where can I get this disk-part program?
Thanks





Re: Alternative disk management software accessible using a screen-reader

William Vandervest
 

Where can I get this disk-part program?
Thanks


Re: Remote connections:

Ekstrand, Pamela A. -ND
 

Jonas,

Does NVDA Remote require NVDA to be installed on both computers?

Pam


________________________________________
From: main@jfw.groups.io [main@jfw.groups.io] on behalf of Jonas Voll [jonas.voll@envisionus.com]
Sent: Tuesday, October 30, 2018 8:47 AM
To: main@jfw.groups.io
Subject: Re: Remote connections:

If I was you I look at the NVDA remote!


Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
https://na01.safelinks.protection.outlook.com/?url=www.envisionus.com&;data=02%7C01%7Cpamela.a.ekstrand.-nd%40disney.com%7Cf9d1edad59dd4fcc8ba508d63e65ea6b%7C56b731a8a2ac4c32bf6b616810e913c6%7C1%7C0%7C636765004784470535&amp;sdata=x3IjcE804Jw4rNOKNRcKlUNAfjPXfJ%2BXpmsl0OgITww%3D&amp;reserved=0

Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Monday, October 29, 2018 3:32 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:

I don't think there is any way to do that. They need Jaws on the other end of the connection. If this is a job, maybe your employer would pay for Aira.

On Mon, 29 Oct 2018 15:29:17 -0400,
charleseblack@att.net wrote:

Afternoon:

I can work as an IT resource for a non-profit organization. I will
need to remote into several machines to achieve my job. Is there a
tool which will allow me to, using jaws, remote into several systems,
achieve the task needed, and then to allow the person to continue
their work? I wish to do this remotely. Would VPN allow that to
happen? Is there a way to achieve this without having JAWS on the
other end; at least in the employee's systems? Thanks!

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 1:50 PM
To: main@jfw.groups.io
Subject: Re: OCR

Thanks.







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR



Ed,



If you have any questions on any of the layered commands, do the following:



JAWS+Spacebar

Then press the Question Mark Key

This will give you a general listing of layered commands and what they
do



Or, JAWS+Spacebar

then press one of the layered commands such as O, H, etc.

then press the question mark key.

This will give you specific options for that layered command.



Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer





----- Original Message -----

From: Ed Legge <mailto:edward.legge@gmail.com>

To: main@jfw.groups.io <mailto:main@jfw.groups.io>

Sent: Monday, October 29, 2018 10:33

Subject: Re: OCR



Thanks.





From: main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of John
Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: OCR



JAWS key plus space bar, then o, then d.



HTH,







John Doering

Administrative Pricing Asst



p. 4147783040 Extn:4063 t. 800-642-8778



NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you
are not the intended recipient, nor the employee or agent responsible
for delivering this message in confidence to the intended
recipient(s), you are hereby notified that you have received this
transmittal in error, and any review, dissemination, distribution or
copying of this transmittal or its attachments is strictly prohibited.
If you have received this transmittal and/or attachments in error,
please notify me immediately by reply e-mail and then delete this message, including any attachments.

From: main@jfw.groups.io <mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io <mailto:jfw@groups.io> >
Subject: OCR



What is the command for getting JAWS to read a PDF file with OCR?







--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com




SonicWall identified this message as clean.
To manage your junk mail go to https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fnospam.envisionus.com&;data=02%7C01%7Cpamela.a.ekstrand.-nd%40disney.com%7Cf9d1edad59dd4fcc8ba508d63e65ea6b%7C56b731a8a2ac4c32bf6b616810e913c6%7C1%7C0%7C636765004784480540&amp;sdata=G6D%2BBOZDvYqWp2%2BuzN7NpG3Xlr83xUHXVa89%2FmZPtvw%3D&amp;reserved=0 and logon with your domain userid and password.
If you consider this email to be spam please forward it to 'spam@nospam.envisionus.com'
NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.


Re: Remote connections:

Jonas Voll
 

If I was you I look at the NVDA remote!


Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Monday, October 29, 2018 3:32 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:

I don't think there is any way to do that. They need Jaws on the other end of the connection. If this is a job, maybe your employer would pay for Aira.

On Mon, 29 Oct 2018 15:29:17 -0400,
charleseblack@att.net wrote:

Afternoon:

I can work as an IT resource for a non-profit organization. I will
need to remote into several machines to achieve my job. Is there a
tool which will allow me to, using jaws, remote into several systems,
achieve the task needed, and then to allow the person to continue
their work? I wish to do this remotely. Would VPN allow that to
happen? Is there a way to achieve this without having JAWS on the
other end; at least in the employee's systems? Thanks!

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 1:50 PM
To: main@jfw.groups.io
Subject: Re: OCR

Thanks.







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR



Ed,



If you have any questions on any of the layered commands, do the following:



JAWS+Spacebar

Then press the Question Mark Key

This will give you a general listing of layered commands and what they
do



Or, JAWS+Spacebar

then press one of the layered commands such as O, H, etc.

then press the question mark key.

This will give you specific options for that layered command.



Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer





----- Original Message -----

From: Ed Legge <mailto:edward.legge@gmail.com>

To: main@jfw.groups.io <mailto:main@jfw.groups.io>

Sent: Monday, October 29, 2018 10:33

Subject: Re: OCR



Thanks.





From: main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of John
Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: OCR



JAWS key plus space bar, then o, then d.



HTH,







John Doering

Administrative Pricing Asst



p. 4147783040 Extn:4063 t. 800-642-8778



NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you
are not the intended recipient, nor the employee or agent responsible
for delivering this message in confidence to the intended
recipient(s), you are hereby notified that you have received this
transmittal in error, and any review, dissemination, distribution or
copying of this transmittal or its attachments is strictly prohibited.
If you have received this transmittal and/or attachments in error,
please notify me immediately by reply e-mail and then delete this message, including any attachments.

From: main@jfw.groups.io <mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io <mailto:jfw@groups.io> >
Subject: OCR



What is the command for getting JAWS to read a PDF file with OCR?







--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com




SonicWall identified this message as clean.
To manage your junk mail go to https://nospam.envisionus.com and logon with your domain userid and password.
If you consider this email to be spam please forward it to 'spam@nospam.envisionus.com'
NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.


Re: Alternative disk management software accessible using a screen-reader

John Covici
 

You have to select the drive first and then the partition if there is
more than one and then you can delete it. Do help while you are in
diskpart for more information.

On Tue, 30 Oct 2018 05:43:24 -0400,
Dave Durber wrote:

Hello John:

Following several searches on line, for instructions on how to
delete a partition/volume on a USB memory stick, several of which
suggested I type the command line:

delete partition

When I tried this command, Windows displayed the message:

No drive is selected.

Then I came across a sight which suggested the command:

clean

which did the trick

Once I closed DiskPart and closed the CMD window, I used the
partition and format manager to see if the entire 64 GB was now
available as . unalocated space.

I'm sorry to say, for me anyway, the only unalocated space
available, was 8 GB.

So, it looks like the rest of the available space between 8 GB an
64 GB no longer exists, that is as far as Windows is concerned.

So, I am off to search for another 64 GB memory stick at a good
discounted price.

Thank you to everyone who has tried to help me with this problem.

Dave Durber

----- Original Message ----- From: "John Covici"
<covici@ccs.covici.com>
To: <main@jfw.groups.io>
Sent: Sunday, October 28, 2018 1:39 PM
Subject: Re: Alternative disk management software accessible
using a screen-reader


What did not work with diskpart?

On Sun, 28 Oct 2018 00:34:29 -0400,
Dave Durber wrote:

Hello everyone:

as the subject says, I am looking for such software to try and
delete the existing partition on my USB memory stick and return
it to its full size of 64 GB.

I have tried using the Disk Partition and Formatting program
which comes with Windows and the command line DiskPart program
with no success.

So, I am hoping that someone can suggest an alternative program
for me to try.

Thanks in anticipation for any suggestions.

Dave Durber





--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com




--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Re: Remote connections:

charleseblack@...
 

Morning:

Thanks for all your help. To draw final conclusions, JAWS must be on both
ends of a connection to use Windows. However, to use a command line
connection using things like PowerShell, it might not be necessary. Thanks
for all your assistance.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Homuth
Sent: Monday, October 29, 2018 7:33 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:

That's what I thought, but wanted to make certain I wasn't high.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: October-29-18 7:27 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:

I don't see how, unless you might be able to do it using Narrator because
you can theoretically get the audio, but its going to be a mess.

On Mon, 29 Oct 2018 17:12:12 -0400,
James Homuth wrote:

So wait. You can use Team viewer to access another computer without
having JAWS on it? Now this I'm interested in.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: October-29-18 5:10 PM
To: miketmote73@gmail.com
Cc: main@jfw.groups.io
Subject: Re: Remote connections:

Citric requires a onetime charge to Freedom Scientific now VISPERO of
$200.00.

The computer that is accessing a remote computer needs a licensed copy
of JAWS running but the server end just needs a copy of JAWS that has
to be installed by the network administrator. If network
administrators are unfimiliar with JAWS they will hesitate with the
installation of JAWS on the server.

You might want to look into Team Viewer as a way to access another
computer that doesn't have JAWS running on it for admin tech support.
It will require a copy of Team Viewer installed on both computers. If
it is a comercial business your are working for, you might want to
look into a legal licensed copy of Team Viewer if that will work for
your
situation.

Original message:
Hi Charles. You are correct. JAWS Tandem requires that the screen
reader be installed on both computers. Remote access would also
require JAWS to be on your computer, and on the server side or
client computer. There are several ways to utilize Remote access.
That would depend on how the company does what they do to allow
someone like yourself to remote into their system. RDP, Remote
Desktop Protocol is one method. Also JAWS supports some Citrix
connections as well. Hope this helps.
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
charleseblack@att.net
Sent: Monday, October 29, 2018 4:18 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:
Sir:
Doesn't JAWS need to be on the destination computer in both cases?
Isn't the Tandem Server only accessible if both computers have JAWS
on them? Doesn't Remote Desktop require JAWES on both ends?
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Monday, October 29, 2018 4:13 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:
I'll take a shot:
JAWS has a feature called Tandem Direct which requires the remote
computer user to type a code to connect to the controler via the
Tandem server or, to answer your question, you can pay a one time
charge for a capability for JAWS to use the facility in Windows
called Remote Desktop to be able to connect and interact with the
remote computer with or without the need to depend on JAWS to be on
the remote
computer.

I don't think using a VPN would provide the necessary interaction of
JAWS to take control of the remote computer like connecting via the
Tandem server would provide.
I don't know of any other means of achieving what you're wanting to
do, but perhaps others will provide some input.
-------- Original Message --------
From: charleseblack@att.net
Sent: Monday, Oct 29, 2018 3:29 PM EST
To: main@jfw.groups.io
Subject: Remote connections:
Afternoon:
I can work as an IT resource for a non-profit organization. I will
need to remote into several machines to achieve my job. Is there a
tool which will allow me to, using jaws, remote into several
systems, achieve the task needed, and then to allow the person to
continue their work? I wish to do this remotely. Would VPN allow
that to happen? Is there a way to achieve this without having JAWS
on the other end; at least in the employee's systems? Thanks!
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 1:50 PM
To: main@jfw.groups.io
Subject: Re: OCR
Thanks.






From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR


Ed,


If you have any questions on any of the layered commands, do the
following:



JAWS+Spacebar
Then press the Question Mark Key
This will give you a general listing of layered commands and what
they do


Or, JAWS+Spacebar
then press one of the layered commands such as O, H, etc.
then press the question mark key.
This will give you specific options for that layered command.


Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer




----- Original Message -----
From: Ed Legge <mailto:edward.legge@gmail.com>
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Sent: Monday, October 29, 2018 10:33
Subject: Re: OCR


Thanks.




From: main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of John
Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: OCR


JAWS key plus space bar, then o, then d.


HTH,






John Doering
Administrative Pricing Asst


p. 4147783040 Extn:4063 t. 800-642-8778


NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you
are not the intended recipient, nor the employee or agent
responsible for delivering this message in confidence to the
intended recipient(s), you are hereby notified that you have
received this transmittal in error, and any review, dissemination,
distribution or copying of this transmittal or its attachments is
strictly prohibited.
If you have received this transmittal and/or attachments in error,
please notify me immediately by reply e-mail and then delete this
message, including any attachments.
From: main@jfw.groups.io <mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io <mailto:jfw@groups.io> >
Subject: OCR


What is the command for getting JAWS to read a PDF file with OCR?







.















--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Re: Alternative disk management software accessible using a screen-reader

Dave Durber
 

Hello John:

Following several searches on line, for instructions on how to delete a partition/volume on a USB memory stick, several of which suggested I type the command line:

delete partition

When I tried this command, Windows displayed the message:

No drive is selected.

Then I came across a sight which suggested the command:

clean

which did the trick

Once I closed DiskPart and closed the CMD window, I used the partition and format manager to see if the entire 64 GB was now available as . unalocated space.

I'm sorry to say, for me anyway, the only unalocated space available, was 8 GB.

So, it looks like the rest of the available space between 8 GB an 64 GB no longer exists, that is as far as Windows is concerned.

So, I am off to search for another 64 GB memory stick at a good discounted price.

Thank you to everyone who has tried to help me with this problem.

Dave Durber

----- Original Message -----
From: "John Covici" <covici@ccs.covici.com>
To: <main@jfw.groups.io>
Sent: Sunday, October 28, 2018 1:39 PM
Subject: Re: Alternative disk management software accessible using a screen-reader


What did not work with diskpart?

On Sun, 28 Oct 2018 00:34:29 -0400,
Dave Durber wrote:

Hello everyone:

as the subject says, I am looking for such software to try and
delete the existing partition on my USB memory stick and return
it to its full size of 64 GB.

I have tried using the Disk Partition and Formatting program
which comes with Windows and the command line DiskPart program
with no success.

So, I am hoping that someone can suggest an alternative program
for me to try.

Thanks in anticipation for any suggestions.

Dave Durber





--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Re: OCR

 

Jaws Key+Spacebar followed by O then  D only works if the file is already open in Acrobat Reader.

You can also recognize a PDF file or, for that matter, most other image files such as JPG, Bitmap, TIF etc. by finding the file in Windows Explorer, then press Shift+F10 for the context menu and “J” for Recognize with Jaws”

And no need to send another “Thanks” message *smile*.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 10:50 AM
To: main@jfw.groups.io
Subject: Re: OCR

 

Thanks.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR

 

Ed,

 

If you have any questions on any of the layered commands, do the following:

 

JAWS+Spacebar

Then press the Question Mark Key

This will give you a general listing of layered commands and what they do

 

Or, JAWS+Spacebar

then press one of the layered commands such as O, H, etc.

then press the question mark key.

This will give you specific options for that layered command.

 

Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

From: Ed Legge

Sent: Monday, October 29, 2018 10:33

Subject: Re: OCR

 

Thanks.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io
Subject: Re: OCR

 

JAWS key plus space bar, then o, then d.

 

HTH,

 

 

 

John Doering

Administrative Pricing Asst 

 

p. 4147783040 Extn:4063  t. 800-642-8778

 

NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io>
Subject: OCR

 

What is the command for getting JAWS to read a PDF file with OCR?

 


Re: more focus problems

Bill White <billwhite92701@...>
 

Try the reverse, and route PC to JAWS with INSERT plus plus on NumPad. See if that works. If not, try using the JAWS Cursor, find the contact, then use Left Mouse Click.

Bill White

billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Jed Barton
Sent: Monday, October 29, 2018 5:25 PM
To: main
Subject: more focus problems

Hey guys,

OK, this focus problem is driving me crazy with the latest jfw.
So i am trying to use a program and it has a list of channels. I need
to focus on 1 of those channels. If i arrow up and down, it'll read
them to me with no problem. However when i hit insert and route jaws
to pc, if you look at the screen, the cursor jumps way up the screen.
I'm trying to figure out why it's not tracking correctly, and it's
driving me nuts. Any ideas?

Thanks,
Jed


more focus problems

Jed Barton <jedbarton@...>
 

Hey guys,

OK, this focus problem is driving me crazy with the latest jfw.
So i am trying to use a program and it has a list of channels. I need
to focus on 1 of those channels. If i arrow up and down, it'll read
them to me with no problem. However when i hit insert and route jaws
to pc, if you look at the screen, the cursor jumps way up the screen.
I'm trying to figure out why it's not tracking correctly, and it's
driving me nuts. Any ideas?

Thanks,
Jed


Re: List request

James Homuth
 

My guess is something’s amiss with your Outlook settings, then. Also curious why it wants to open Windows Mail if Outlook’s the default. But I’ll bet your emails aren’t actually sending, but are rather probably still sitting in your outbox.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of denise avant
Sent: October-29-18 7:12 PM
To: main@jfw.groups.io
Subject: Re: List request

 

Hi,

I just checked my settings, and outlook is the default e-mail client. I should also say that I sent one of my previous messages from the mail account on my iPhone. I think I have sent two, but I have forgotten what one of them was about. I recall that the other had to do with possibly having JAWS work on a Surface Go.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Homuth
Sent: Monday, October 29, 2018 6:09 AM
To: main@jfw.groups.io
Subject: Re: List request

 

Hello,

 

It sounds like your Outlook isn’t set up properly. This message came through just fine, but the fact it wants to open it up in windows Mail tells me whoever actually set up Outlook only did part of the job. This would also explain why I never received your email.

 

James,

List Admin

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of denise avant
Sent: October-28-18 10:45 PM
To: main@jfw.groups.io
Subject: Re: List request

 

Hello,

I am replying to this thread only because I have been having trouble posting directly to the list using MS Outlook, though I have joined it. So, just as a test, I have clicked on the e-mail address for the group seen in some of the posts. When I do that, I am sent to Windows Mail,  not Outlook, which is my mail client. I can read the mail from the group in Outlook. So, I am wondering if it is not possible to actually send a post to this group using Outlook? I did e-mail the list moderator with no response.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Sunday, October 28, 2018 11:50 AM
To: main@jfw.groups.io
Subject: Re: List request

 

I agree with Richard, when I read messages I delete them when I read the message and if another person replies a day later referring to something but he does not have the thread in his message I found it is often unclear what this refers to. I guess in such a case I just also delete he message since I may not be able torespond not knowing the context, but while a long thread may not be always useful it doesn’t bother me since the new reply is at the top (if it isn’t then that is not my problem) so I don’t have to read the entire thread, but if I do want to refer back to something then I can or if I look for a link that was in a message 5 replies further down the thread then it is easy to find..

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
Sent: Sunday, October 28, 2018 9:24 AM
To: main@jfw.groups.io
Subject: Re: List request

 

I think keeping the subject line clear and specific will help a lot, even if it needs to be changed/updated to fit a new thread from the original. Just my opinion.

 

Cheerfully,

 

Shirley Tracy

 

From: george b
Sent: Sunday, October 28, 2018 11:15 AM
To: main@jfw.groups.io
Subject: Re: List request

 

Thank you...i feel the same way how can we help if we do not know what your

asking about

 

-----Original Message-----

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner

Sent: October 28, 2018 8:13

To: JFW user list <main@jfw.groups.io>

Subject: List request

 

This is my Pet Peeve for the month:

Those of you, and there are several so I'm not pointing out anyone in

particular, on this list who have there email set to not quote the previous

message make it very difficult for those of us who want to help. If you do

not explain the context of your message, it often leaves me scratching my

head wondering what the heck the person is replying to.

So, please consider summarizing the answer you are replying to so we might

be able to offer a different suggestion, or set your email program to

include the prior message.

Just my thoughts. I often want to assist, but have no idea what the issue

is, so I simply delete the message.

Richard

 

 

 

 

 

 

"It is a great thing to start life with a small number of really good books

which are your very own." __  Sir Arthur Conan Doyle

 

 

 

 

 

 


Re: Remote connections:

James Homuth
 

That's what I thought, but wanted to make certain I wasn't high.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: October-29-18 7:27 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:

I don't see how, unless you might be able to do it using Narrator because
you can theoretically get the audio, but its going to be a mess.

On Mon, 29 Oct 2018 17:12:12 -0400,
James Homuth wrote:

So wait. You can use Team viewer to access another computer without
having JAWS on it? Now this I'm interested in.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: October-29-18 5:10 PM
To: miketmote73@gmail.com
Cc: main@jfw.groups.io
Subject: Re: Remote connections:

Citric requires a onetime charge to Freedom Scientific now VISPERO of
$200.00.

The computer that is accessing a remote computer needs a licensed copy
of JAWS running but the server end just needs a copy of JAWS that has
to be installed by the network administrator. If network
administrators are unfimiliar with JAWS they will hesitate with the
installation of JAWS on the server.

You might want to look into Team Viewer as a way to access another
computer that doesn't have JAWS running on it for admin tech support.
It will require a copy of Team Viewer installed on both computers. If
it is a comercial business your are working for, you might want to
look into a legal licensed copy of Team Viewer if that will work for your
situation.

Original message:
Hi Charles. You are correct. JAWS Tandem requires that the screen
reader be installed on both computers. Remote access would also
require JAWS to be on your computer, and on the server side or
client computer. There are several ways to utilize Remote access.
That would depend on how the company does what they do to allow
someone like yourself to remote into their system. RDP, Remote
Desktop Protocol is one method. Also JAWS supports some Citrix
connections as well. Hope this helps.
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
charleseblack@att.net
Sent: Monday, October 29, 2018 4:18 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:
Sir:
Doesn't JAWS need to be on the destination computer in both cases?
Isn't the Tandem Server only accessible if both computers have JAWS
on them? Doesn't Remote Desktop require JAWES on both ends?
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Monday, October 29, 2018 4:13 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:
I'll take a shot:
JAWS has a feature called Tandem Direct which requires the remote
computer user to type a code to connect to the controler via the
Tandem server or, to answer your question, you can pay a one time
charge for a capability for JAWS to use the facility in Windows
called Remote Desktop to be able to connect and interact with the
remote computer with or without the need to depend on JAWS to be on
the remote
computer.

I don't think using a VPN would provide the necessary interaction of
JAWS to take control of the remote computer like connecting via the
Tandem server would provide.
I don't know of any other means of achieving what you're wanting to
do, but perhaps others will provide some input.
-------- Original Message --------
From: charleseblack@att.net
Sent: Monday, Oct 29, 2018 3:29 PM EST
To: main@jfw.groups.io
Subject: Remote connections:
Afternoon:
I can work as an IT resource for a non-profit organization. I will
need to remote into several machines to achieve my job. Is there a
tool which will allow me to, using jaws, remote into several
systems, achieve the task needed, and then to allow the person to
continue their work? I wish to do this remotely. Would VPN allow
that to happen? Is there a way to achieve this without having JAWS
on the other end; at least in the employee's systems? Thanks!
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 1:50 PM
To: main@jfw.groups.io
Subject: Re: OCR
Thanks.






From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR


Ed,


If you have any questions on any of the layered commands, do the
following:



JAWS+Spacebar
Then press the Question Mark Key
This will give you a general listing of layered commands and what
they do


Or, JAWS+Spacebar
then press one of the layered commands such as O, H, etc.
then press the question mark key.
This will give you specific options for that layered command.


Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer




----- Original Message -----
From: Ed Legge <mailto:edward.legge@gmail.com>
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Sent: Monday, October 29, 2018 10:33
Subject: Re: OCR


Thanks.




From: main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of John
Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: OCR


JAWS key plus space bar, then o, then d.


HTH,






John Doering
Administrative Pricing Asst


p. 4147783040 Extn:4063 t. 800-642-8778


NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you
are not the intended recipient, nor the employee or agent
responsible for delivering this message in confidence to the
intended recipient(s), you are hereby notified that you have
received this transmittal in error, and any review, dissemination,
distribution or copying of this transmittal or its attachments is
strictly prohibited.
If you have received this transmittal and/or attachments in error,
please notify me immediately by reply e-mail and then delete this
message, including any attachments.
From: main@jfw.groups.io <mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io <mailto:jfw@groups.io> >
Subject: OCR


What is the command for getting JAWS to read a PDF file with OCR?







.















--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Re: List request

denise avant <denise.avant@...>
 

Hi,

I just checked my settings, and outlook is the default e-mail client. I should also say that I sent one of my previous messages from the mail account on my iPhone. I think I have sent two, but I have forgotten what one of them was about. I recall that the other had to do with possibly having JAWS work on a Surface Go.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Homuth
Sent: Monday, October 29, 2018 6:09 AM
To: main@jfw.groups.io
Subject: Re: List request

 

Hello,

 

It sounds like your Outlook isn’t set up properly. This message came through just fine, but the fact it wants to open it up in windows Mail tells me whoever actually set up Outlook only did part of the job. This would also explain why I never received your email.

 

James,

List Admin

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of denise avant
Sent: October-28-18 10:45 PM
To: main@jfw.groups.io
Subject: Re: List request

 

Hello,

I am replying to this thread only because I have been having trouble posting directly to the list using MS Outlook, though I have joined it. So, just as a test, I have clicked on the e-mail address for the group seen in some of the posts. When I do that, I am sent to Windows Mail,  not Outlook, which is my mail client. I can read the mail from the group in Outlook. So, I am wondering if it is not possible to actually send a post to this group using Outlook? I did e-mail the list moderator with no response.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Sunday, October 28, 2018 11:50 AM
To: main@jfw.groups.io
Subject: Re: List request

 

I agree with Richard, when I read messages I delete them when I read the message and if another person replies a day later referring to something but he does not have the thread in his message I found it is often unclear what this refers to. I guess in such a case I just also delete he message since I may not be able torespond not knowing the context, but while a long thread may not be always useful it doesn’t bother me since the new reply is at the top (if it isn’t then that is not my problem) so I don’t have to read the entire thread, but if I do want to refer back to something then I can or if I look for a link that was in a message 5 replies further down the thread then it is easy to find..

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
Sent: Sunday, October 28, 2018 9:24 AM
To: main@jfw.groups.io
Subject: Re: List request

 

I think keeping the subject line clear and specific will help a lot, even if it needs to be changed/updated to fit a new thread from the original. Just my opinion.

 

Cheerfully,

 

Shirley Tracy

 

From: george b
Sent: Sunday, October 28, 2018 11:15 AM
To: main@jfw.groups.io
Subject: Re: List request

 

Thank you...i feel the same way how can we help if we do not know what your

asking about

 

-----Original Message-----

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner

Sent: October 28, 2018 8:13

To: JFW user list <main@jfw.groups.io>

Subject: List request

 

This is my Pet Peeve for the month:

Those of you, and there are several so I'm not pointing out anyone in

particular, on this list who have there email set to not quote the previous

message make it very difficult for those of us who want to help. If you do

not explain the context of your message, it often leaves me scratching my

head wondering what the heck the person is replying to.

So, please consider summarizing the answer you are replying to so we might

be able to offer a different suggestion, or set your email program to

include the prior message.

Just my thoughts. I often want to assist, but have no idea what the issue

is, so I simply delete the message.

Richard

 

 

 

 

 

 

"It is a great thing to start life with a small number of really good books

which are your very own." __  Sir Arthur Conan Doyle