|
Jaws 2018 Window Media Player version 13 Problem rip audio artist cd without automatic rips
O.Addison Gethers
Hello All I have desktop computer with window 10 ,usingand Jaws 2018 !! I have window media player when I put audio artist cd in drive the music began to play so I press ctrl S to stop then when I press tab key it’s say help button then press tab it’s have the artist name with song 1 thru 12 when I heard number 1 is not check I press spacebar to check thru 12 songs name then I press tab it’s say save rip cdbutton then press tab again it’s say rip menu !! I don’t even hear it say start rip button when I keep tabbing down ,Does anyone know how I can get cd rips so it can get into library or something? I’m getting confuse with this ,that’s why I didn’t want automatic rips at all!! I need some helps here.When I open my music folder the artist that I’m trying to rips is not there from window media player to library!! Addison
|
|
|
|
Re: Alternative disk management software accessible using a screen-reader
Dave Durber
Hello John:
toggle quoted messageShow quoted text
I did select the drive first, before using the "Clean" command. I am not going to waste any more time trying to recover the lost drive space, I'll use the memory stick as a Windows installation disk.
Dave Durber----- Original Message -----
From: "John Covici" <covici@ccs.covici.com> To: <main@jfw.groups.io> Sent: Tuesday, October 30, 2018 12:23 PM Subject: Re: Alternative disk management software accessible using a screen-reader You have to select the drive first and then the partition if there is
|
|
|
|
Re: Remote connections:
Milton Ota <mota1252@...>
Hello,
toggle quoted messageShow quoted text
I believe that to use the remote connection with NVDA copies of the program must be running on both machines. I have been thinking about this a little more and a possibility is Remote Incident Manager from Sero Tek which is a subscription based program and the System Access speech program does not have to be the primary screen reader. I would give them a call at 866-202-0520 and talk with them. Original message:
Jonas, Does NVDA Remote require NVDA to be installed on both computers? Pam ________________________________________ If I was you I look at the NVDA remote! Jonas Voll Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research. -----Original Message----- I don't think there is any way to do that. They need Jaws on the other end of the connection. If this is a job, maybe your employer would pay for Aira. On Mon, 29 Oct 2018 15:29:17 -0400, Afternoon: I can work as an IT resource for a non-profit organization. I will -----Original Message----- Thanks. From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave... Ed, If you have any questions on any of the layered commands, do the following: JAWS+Spacebar Then press the Question Mark Key This will give you a general listing of layered commands and what they Or, JAWS+Spacebar then press one of the layered commands such as O, H, etc. then press the question mark key. This will give you specific options for that layered command. Dave ----- Original Message ----- From: Ed Legge <mailto:edward.legge@gmail.com> To: main@jfw.groups.io <mailto:main@jfw.groups.io> Sent: Monday, October 29, 2018 10:33 Subject: Re: OCR Thanks. From: main@jfw.groups.io <mailto:main@jfw.groups.io> JAWS key plus space bar, then o, then d. HTH, John Doering Administrative Pricing Asst p. 4147783040 Extn:4063 t. 800-642-8778 NOTICE: The information contained in this email and any document From: main@jfw.groups.io <mailto:main@jfw.groups.io> What is the command for getting JAWS to read a PDF file with OCR? -- John Covici wb2una SonicWall identified this message as clean.
|
|
|
|
Re: Remote connections:
Milton Ota <mota1252@...>
Hello,
toggle quoted messageShow quoted text
I believe that to use the remote connection with NVDA copies of the program must be running on both machines. I have been thinking about this a little more and a possibility is Remote Incident Manager from Sero Tek which is a subscription based program and the System Access speech program does not have to be the primary screen reader. I would give them a call at 866-202-0520 and talk with them. Original message:
Jonas, Does NVDA Remote require NVDA to be installed on both computers? Pam ________________________________________ If I was you I look at the NVDA remote! Jonas Voll Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research. -----Original Message----- I don't think there is any way to do that. They need Jaws on the other end of the connection. If this is a job, maybe your employer would pay for Aira. On Mon, 29 Oct 2018 15:29:17 -0400, Afternoon: I can work as an IT resource for a non-profit organization. I will -----Original Message----- Thanks. From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave... Ed, If you have any questions on any of the layered commands, do the following: JAWS+Spacebar Then press the Question Mark Key This will give you a general listing of layered commands and what they Or, JAWS+Spacebar then press one of the layered commands such as O, H, etc. then press the question mark key. This will give you specific options for that layered command. Dave ----- Original Message ----- From: Ed Legge <mailto:edward.legge@gmail.com> To: main@jfw.groups.io <mailto:main@jfw.groups.io> Sent: Monday, October 29, 2018 10:33 Subject: Re: OCR Thanks. From: main@jfw.groups.io <mailto:main@jfw.groups.io> JAWS key plus space bar, then o, then d. HTH, John Doering Administrative Pricing Asst p. 4147783040 Extn:4063 t. 800-642-8778 NOTICE: The information contained in this email and any document From: main@jfw.groups.io <mailto:main@jfw.groups.io> What is the command for getting JAWS to read a PDF file with OCR? -- John Covici wb2una SonicWall identified this message as clean.
|
|
|
|
Re: Alternative disk management software accessible using a screen-reader
Dave Durber
Hello William:
toggle quoted messageShow quoted text
DiskPart, is included with your installation of Windows. Dave Durber
----- Original Message -----
From: "William Vandervest" <timelord09@comcast.net> To: <main@jfw.groups.io> Sent: Tuesday, October 30, 2018 1:32 PM Subject: Re: Alternative disk management software accessible using a screen-reader Where can I get this disk-part program?
|
|
|
|
Re: Alternative disk management software accessible using a screen-reader
William Vandervest
Where can I get this disk-part program?
Thanks
|
|
|
|
Re: Remote connections:
Ekstrand, Pamela A. -ND
Jonas,
Does NVDA Remote require NVDA to be installed on both computers? Pam ________________________________________ From: main@jfw.groups.io [main@jfw.groups.io] on behalf of Jonas Voll [jonas.voll@envisionus.com] Sent: Tuesday, October 30, 2018 8:47 AM To: main@jfw.groups.io Subject: Re: Remote connections: If I was you I look at the NVDA remote! Jonas Voll Support Technician I Envision, Inc. 2301 S Water ST Wichita, KS 67213 O: 316-425-7141 F: 316-267-4312 https://na01.safelinks.protection.outlook.com/?url=www.envisionus.com&;amp;data=02%7C01%7Cpamela.a.ekstrand.-nd%40disney.com%7Cf9d1edad59dd4fcc8ba508d63e65ea6b%7C56b731a8a2ac4c32bf6b616810e913c6%7C1%7C0%7C636765004784470535&sdata=x3IjcE804Jw4rNOKNRcKlUNAfjPXfJ%2BXpmsl0OgITww%3D&reserved=0 Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research. -----Original Message----- From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici Sent: Monday, October 29, 2018 3:32 PM To: main@jfw.groups.io Subject: Re: Remote connections: I don't think there is any way to do that. They need Jaws on the other end of the connection. If this is a job, maybe your employer would pay for Aira. On Mon, 29 Oct 2018 15:29:17 -0400, charleseblack@att.net wrote: -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una covici@ccs.covici.com SonicWall identified this message as clean. To manage your junk mail go to https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fnospam.envisionus.com&;amp;data=02%7C01%7Cpamela.a.ekstrand.-nd%40disney.com%7Cf9d1edad59dd4fcc8ba508d63e65ea6b%7C56b731a8a2ac4c32bf6b616810e913c6%7C1%7C0%7C636765004784480540&sdata=G6D%2BBOZDvYqWp2%2BuzN7NpG3Xlr83xUHXVa89%2FmZPtvw%3D&reserved=0 and logon with your domain userid and password. If you consider this email to be spam please forward it to 'spam@nospam.envisionus.com' NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.
|
|
|
|
Re: Remote connections:
Jonas Voll
If I was you I look at the NVDA remote!
toggle quoted messageShow quoted text
Jonas Voll Support Technician I Envision, Inc. 2301 S Water ST Wichita, KS 67213 O: 316-425-7141 F: 316-267-4312 www.envisionus.com Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research.
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici Sent: Monday, October 29, 2018 3:32 PM To: main@jfw.groups.io Subject: Re: Remote connections: I don't think there is any way to do that. They need Jaws on the other end of the connection. If this is a job, maybe your employer would pay for Aira. On Mon, 29 Oct 2018 15:29:17 -0400, charleseblack@att.net wrote: -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una covici@ccs.covici.com SonicWall identified this message as clean. To manage your junk mail go to https://nospam.envisionus.com and logon with your domain userid and password. If you consider this email to be spam please forward it to 'spam@nospam.envisionus.com' NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.
|
|
|
|
Re: Alternative disk management software accessible using a screen-reader
John Covici
You have to select the drive first and then the partition if there is
more than one and then you can delete it. Do help while you are in diskpart for more information. On Tue, 30 Oct 2018 05:43:24 -0400, Dave Durber wrote: -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una covici@ccs.covici.com
|
|
|
|
Re: Remote connections:
charleseblack@...
Morning:
toggle quoted messageShow quoted text
Thanks for all your help. To draw final conclusions, JAWS must be on both ends of a connection to use Windows. However, to use a command line connection using things like PowerShell, it might not be necessary. Thanks for all your assistance.
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Homuth Sent: Monday, October 29, 2018 7:33 PM To: main@jfw.groups.io Subject: Re: Remote connections: That's what I thought, but wanted to make certain I wasn't high. -----Original Message----- From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici Sent: October-29-18 7:27 PM To: main@jfw.groups.io Subject: Re: Remote connections: I don't see how, unless you might be able to do it using Narrator because you can theoretically get the audio, but its going to be a mess. On Mon, 29 Oct 2018 17:12:12 -0400, James Homuth wrote: situation. strictly prohibited. --If you have received this transmittal and/or attachments in error, Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una covici@ccs.covici.com
|
|
|
|
Re: Alternative disk management software accessible using a screen-reader
Dave Durber
Hello John:
toggle quoted messageShow quoted text
Following several searches on line, for instructions on how to delete a partition/volume on a USB memory stick, several of which suggested I type the command line: delete partition When I tried this command, Windows displayed the message: No drive is selected. Then I came across a sight which suggested the command: clean which did the trick Once I closed DiskPart and closed the CMD window, I used the partition and format manager to see if the entire 64 GB was now available as . unalocated space. I'm sorry to say, for me anyway, the only unalocated space available, was 8 GB. So, it looks like the rest of the available space between 8 GB an 64 GB no longer exists, that is as far as Windows is concerned. So, I am off to search for another 64 GB memory stick at a good discounted price. Thank you to everyone who has tried to help me with this problem. Dave Durber
----- Original Message -----
From: "John Covici" <covici@ccs.covici.com> To: <main@jfw.groups.io> Sent: Sunday, October 28, 2018 1:39 PM Subject: Re: Alternative disk management software accessible using a screen-reader What did not work with diskpart?
|
|
|
|
Re: OCR
Jaws Key+Spacebar followed by O then D only works if the file is already open in Acrobat Reader. You can also recognize a PDF file or, for that matter, most other image files such as JPG, Bitmap, TIF etc. by finding the file in Windows Explorer, then press Shift+F10 for the context menu and “J” for Recognize with Jaws” And no need to send another “Thanks” message *smile*.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
Ed Legge
Sent: Monday, October 29, 2018 10:50 AM To: main@jfw.groups.io Subject: Re: OCR
Thanks.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
Dave...
Ed,
If you have any questions on any of the layered commands, do the following:
JAWS+Spacebar Then press the Question Mark Key This will give you a general listing of layered commands and what they do
Or, JAWS+Spacebar then press one of the layered commands such as O, H, etc. then press the question mark key. This will give you specific options for that layered command.
Dave
Thanks.
From: main@jfw.groups.io <main@jfw.groups.io>
On Behalf Of John Doering
JAWS key plus space bar, then o, then d.
HTH,
John Doering Administrative Pricing Asst
p. 4147783040 Extn:4063 t. 800-642-8778
NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments. From: main@jfw.groups.io [mailto:main@jfw.groups.io]
On Behalf Of Ed Legge
What is the command for getting JAWS to read a PDF file with OCR?
|
|
|
|
Re: more focus problems
Bill White <billwhite92701@...>
Try the reverse, and route PC to JAWS with INSERT plus plus on NumPad. See if that works. If not, try using the JAWS Cursor, find the contact, then use Left Mouse Click.
toggle quoted messageShow quoted text
Bill White billwhite92701@dslextreme.com
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Jed Barton Sent: Monday, October 29, 2018 5:25 PM To: main Subject: more focus problems Hey guys, OK, this focus problem is driving me crazy with the latest jfw. So i am trying to use a program and it has a list of channels. I need to focus on 1 of those channels. If i arrow up and down, it'll read them to me with no problem. However when i hit insert and route jaws to pc, if you look at the screen, the cursor jumps way up the screen. I'm trying to figure out why it's not tracking correctly, and it's driving me nuts. Any ideas? Thanks, Jed
|
|
|
|
more focus problems
Jed Barton <jedbarton@...>
Hey guys,
OK, this focus problem is driving me crazy with the latest jfw. So i am trying to use a program and it has a list of channels. I need to focus on 1 of those channels. If i arrow up and down, it'll read them to me with no problem. However when i hit insert and route jaws to pc, if you look at the screen, the cursor jumps way up the screen. I'm trying to figure out why it's not tracking correctly, and it's driving me nuts. Any ideas? Thanks, Jed
|
|
|
|
Re: List request
James Homuth
My guess is something’s amiss with your Outlook settings, then. Also curious why it wants to open Windows Mail if Outlook’s the default. But I’ll bet your emails aren’t actually sending, but are rather probably still sitting in your outbox.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of denise avant
Sent: October-29-18 7:12 PM To: main@jfw.groups.io Subject: Re: List request
Hi, I just checked my settings, and outlook is the default e-mail client. I should also say that I sent one of my previous messages from the mail account on my iPhone. I think I have sent two, but I have forgotten what one of them was about. I recall that the other had to do with possibly having JAWS work on a Surface Go.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Homuth
Hello,
It sounds like your Outlook isn’t set up properly. This message came through just fine, but the fact it wants to open it up in windows Mail tells me whoever actually set up Outlook only did part of the job. This would also explain why I never received your email.
James, List Admin
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of denise avant
Hello, I am replying to this thread only because I have been having trouble posting directly to the list using MS Outlook, though I have joined it. So, just as a test, I have clicked on the e-mail address for the group seen in some of the posts. When I do that, I am sent to Windows Mail, not Outlook, which is my mail client. I can read the mail from the group in Outlook. So, I am wondering if it is not possible to actually send a post to this group using Outlook? I did e-mail the list moderator with no response.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
I agree with Richard, when I read messages I delete them when I read the message and if another person replies a day later referring to something but he does not have the thread in his message I found it is often unclear what this refers to. I guess in such a case I just also delete he message since I may not be able torespond not knowing the context, but while a long thread may not be always useful it doesn’t bother me since the new reply is at the top (if it isn’t then that is not my problem) so I don’t have to read the entire thread, but if I do want to refer back to something then I can or if I look for a link that was in a message 5 replies further down the thread then it is easy to find..
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
I think keeping the subject line clear and specific will help a lot, even if it needs to be changed/updated to fit a new thread from the original. Just my opinion.
Cheerfully,
Shirley Tracy
From: george b
Thank you...i feel the same way how can we help if we do not know what your asking about
-----Original Message----- From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner Sent: October 28, 2018 8:13 To: JFW user list <main@jfw.groups.io> Subject: List request
This is my Pet Peeve for the month: Those of you, and there are several so I'm not pointing out anyone in particular, on this list who have there email set to not quote the previous message make it very difficult for those of us who want to help. If you do not explain the context of your message, it often leaves me scratching my head wondering what the heck the person is replying to. So, please consider summarizing the answer you are replying to so we might be able to offer a different suggestion, or set your email program to include the prior message. Just my thoughts. I often want to assist, but have no idea what the issue is, so I simply delete the message. Richard
"It is a great thing to start life with a small number of really good books which are your very own." __ Sir Arthur Conan Doyle
|
|
|
|
Re: Remote connections:
James Homuth
That's what I thought, but wanted to make certain I wasn't high.
toggle quoted messageShow quoted text
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici Sent: October-29-18 7:27 PM To: main@jfw.groups.io Subject: Re: Remote connections: I don't see how, unless you might be able to do it using Narrator because you can theoretically get the audio, but its going to be a mess. On Mon, 29 Oct 2018 17:12:12 -0400, James Homuth wrote: situation. strictly prohibited. --If you have received this transmittal and/or attachments in error, Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una covici@ccs.covici.com
|
|
|
|
Re: List request
denise avant <denise.avant@...>
Hi, I just checked my settings, and outlook is the default e-mail client. I should also say that I sent one of my previous messages from the mail account on my iPhone. I think I have sent two, but I have forgotten what one of them was about. I recall that the other had to do with possibly having JAWS work on a Surface Go.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Homuth
Sent: Monday, October 29, 2018 6:09 AM To: main@jfw.groups.io Subject: Re: List request
Hello,
It sounds like your Outlook isn’t set up properly. This message came through just fine, but the fact it wants to open it up in windows Mail tells me whoever actually set up Outlook only did part of the job. This would also explain why I never received your email.
James, List Admin
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of denise avant
Hello, I am replying to this thread only because I have been having trouble posting directly to the list using MS Outlook, though I have joined it. So, just as a test, I have clicked on the e-mail address for the group seen in some of the posts. When I do that, I am sent to Windows Mail, not Outlook, which is my mail client. I can read the mail from the group in Outlook. So, I am wondering if it is not possible to actually send a post to this group using Outlook? I did e-mail the list moderator with no response.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
I agree with Richard, when I read messages I delete them when I read the message and if another person replies a day later referring to something but he does not have the thread in his message I found it is often unclear what this refers to. I guess in such a case I just also delete he message since I may not be able torespond not knowing the context, but while a long thread may not be always useful it doesn’t bother me since the new reply is at the top (if it isn’t then that is not my problem) so I don’t have to read the entire thread, but if I do want to refer back to something then I can or if I look for a link that was in a message 5 replies further down the thread then it is easy to find..
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
I think keeping the subject line clear and specific will help a lot, even if it needs to be changed/updated to fit a new thread from the original. Just my opinion.
Cheerfully,
Shirley Tracy
From: george b
Thank you...i feel the same way how can we help if we do not know what your asking about
-----Original Message----- From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner Sent: October 28, 2018 8:13 To: JFW user list <main@jfw.groups.io> Subject: List request
This is my Pet Peeve for the month: Those of you, and there are several so I'm not pointing out anyone in particular, on this list who have there email set to not quote the previous message make it very difficult for those of us who want to help. If you do not explain the context of your message, it often leaves me scratching my head wondering what the heck the person is replying to. So, please consider summarizing the answer you are replying to so we might be able to offer a different suggestion, or set your email program to include the prior message. Just my thoughts. I often want to assist, but have no idea what the issue is, so I simply delete the message. Richard
"It is a great thing to start life with a small number of really good books which are your very own." __ Sir Arthur Conan Doyle
|
|
|
|
Re: Remote connections:
John Covici
I don't see how, unless you might be able to do it using Narrator
because you can theoretically get the audio, but its going to be a mess. On Mon, 29 Oct 2018 17:12:12 -0400, James Homuth wrote: -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una covici@ccs.covici.com
|
|
|
|
a strange focus problem
Jed Barton <jedbarton@...>
Hey guys.
OK, so i am having a very strange problem with all my versions of jaws. I'm trying to use a program, it's a piece of software used for programming a 2 way radio. I need to focus on a list of contacts in the radio. So, i can get to that list, and arrow up and down it with no problem. The issue is i need to highlight 1 of those contacts. In order to do that i am doing a left mouse. When i route my jaws to pc cursor and do a left click, the cursor jumps up 2 contacts, in other words it changes the focus of what i need to highlight. Any words of wisdom here guys? I had someone looking at it on the screen, and that's what it was doing. Any ideas? Thanks, Jed
|
|
|
|
Re: Remote connections:
James Homuth
So wait. You can use Team viewer to access another computer without having
toggle quoted messageShow quoted text
JAWS on it? Now this I'm interested in.
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota Sent: October-29-18 5:10 PM To: miketmote73@gmail.com Cc: main@jfw.groups.io Subject: Re: Remote connections: Citric requires a onetime charge to Freedom Scientific now VISPERO of $200.00. The computer that is accessing a remote computer needs a licensed copy of JAWS running but the server end just needs a copy of JAWS that has to be installed by the network administrator. If network administrators are unfimiliar with JAWS they will hesitate with the installation of JAWS on the server. You might want to look into Team Viewer as a way to access another computer that doesn't have JAWS running on it for admin tech support. It will require a copy of Team Viewer installed on both computers. If it is a comercial business your are working for, you might want to look into a legal licensed copy of Team Viewer if that will work for your situation. Original message: Hi Charles. You are correct. JAWS Tandem requires that the screen -----Original Message----- Sir: Doesn't JAWS need to be on the destination computer in both cases? -----Original Message----- I'll take a shot: JAWS has a feature called Tandem Direct which requires the remotecomputer. I don't think using a VPN would provide the necessary interaction of I don't know of any other means of achieving what you're wanting to Afternoon: I can work as an IT resource for a non-profit organization. I will -----Original Message----- Thanks. From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave... Ed, If you have any questions on any of the layered commands, do thefollowing: JAWS+Spacebar Then press the Question Mark Key This will give you a general listing of layered commands and what they Or, JAWS+Spacebar then press one of the layered commands such as O, H, etc. then press the question mark key. This will give you specific options for that layered command. Dave ----- Original Message ----- From: Ed Legge <mailto:edward.legge@gmail.com> To: main@jfw.groups.io <mailto:main@jfw.groups.io> Sent: Monday, October 29, 2018 10:33 Subject: Re: OCR Thanks. From: main@jfw.groups.io <mailto:main@jfw.groups.io> JAWS key plus space bar, then o, then d. HTH, John Doering Administrative Pricing Asst p. 4147783040 Extn:4063 t. 800-642-8778 NOTICE: The information contained in this email and any document From: main@jfw.groups.io <mailto:main@jfw.groups.io> What is the command for getting JAWS to read a PDF file with OCR? .
|
|
|
