Date   

Re: more focus problems

Bill White <billwhite92701@...>
 

Try the reverse, and route PC to JAWS with INSERT plus plus on NumPad. See if that works. If not, try using the JAWS Cursor, find the contact, then use Left Mouse Click.

Bill White

billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Jed Barton
Sent: Monday, October 29, 2018 5:25 PM
To: main
Subject: more focus problems

Hey guys,

OK, this focus problem is driving me crazy with the latest jfw.
So i am trying to use a program and it has a list of channels. I need
to focus on 1 of those channels. If i arrow up and down, it'll read
them to me with no problem. However when i hit insert and route jaws
to pc, if you look at the screen, the cursor jumps way up the screen.
I'm trying to figure out why it's not tracking correctly, and it's
driving me nuts. Any ideas?

Thanks,
Jed


more focus problems

Jed Barton <jedbarton@...>
 

Hey guys,

OK, this focus problem is driving me crazy with the latest jfw.
So i am trying to use a program and it has a list of channels. I need
to focus on 1 of those channels. If i arrow up and down, it'll read
them to me with no problem. However when i hit insert and route jaws
to pc, if you look at the screen, the cursor jumps way up the screen.
I'm trying to figure out why it's not tracking correctly, and it's
driving me nuts. Any ideas?

Thanks,
Jed


Re: List request

James Homuth
 

My guess is something’s amiss with your Outlook settings, then. Also curious why it wants to open Windows Mail if Outlook’s the default. But I’ll bet your emails aren’t actually sending, but are rather probably still sitting in your outbox.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of denise avant
Sent: October-29-18 7:12 PM
To: main@jfw.groups.io
Subject: Re: List request

 

Hi,

I just checked my settings, and outlook is the default e-mail client. I should also say that I sent one of my previous messages from the mail account on my iPhone. I think I have sent two, but I have forgotten what one of them was about. I recall that the other had to do with possibly having JAWS work on a Surface Go.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Homuth
Sent: Monday, October 29, 2018 6:09 AM
To: main@jfw.groups.io
Subject: Re: List request

 

Hello,

 

It sounds like your Outlook isn’t set up properly. This message came through just fine, but the fact it wants to open it up in windows Mail tells me whoever actually set up Outlook only did part of the job. This would also explain why I never received your email.

 

James,

List Admin

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of denise avant
Sent: October-28-18 10:45 PM
To: main@jfw.groups.io
Subject: Re: List request

 

Hello,

I am replying to this thread only because I have been having trouble posting directly to the list using MS Outlook, though I have joined it. So, just as a test, I have clicked on the e-mail address for the group seen in some of the posts. When I do that, I am sent to Windows Mail,  not Outlook, which is my mail client. I can read the mail from the group in Outlook. So, I am wondering if it is not possible to actually send a post to this group using Outlook? I did e-mail the list moderator with no response.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Sunday, October 28, 2018 11:50 AM
To: main@jfw.groups.io
Subject: Re: List request

 

I agree with Richard, when I read messages I delete them when I read the message and if another person replies a day later referring to something but he does not have the thread in his message I found it is often unclear what this refers to. I guess in such a case I just also delete he message since I may not be able torespond not knowing the context, but while a long thread may not be always useful it doesn’t bother me since the new reply is at the top (if it isn’t then that is not my problem) so I don’t have to read the entire thread, but if I do want to refer back to something then I can or if I look for a link that was in a message 5 replies further down the thread then it is easy to find..

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
Sent: Sunday, October 28, 2018 9:24 AM
To: main@jfw.groups.io
Subject: Re: List request

 

I think keeping the subject line clear and specific will help a lot, even if it needs to be changed/updated to fit a new thread from the original. Just my opinion.

 

Cheerfully,

 

Shirley Tracy

 

From: george b
Sent: Sunday, October 28, 2018 11:15 AM
To: main@jfw.groups.io
Subject: Re: List request

 

Thank you...i feel the same way how can we help if we do not know what your

asking about

 

-----Original Message-----

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner

Sent: October 28, 2018 8:13

To: JFW user list <main@jfw.groups.io>

Subject: List request

 

This is my Pet Peeve for the month:

Those of you, and there are several so I'm not pointing out anyone in

particular, on this list who have there email set to not quote the previous

message make it very difficult for those of us who want to help. If you do

not explain the context of your message, it often leaves me scratching my

head wondering what the heck the person is replying to.

So, please consider summarizing the answer you are replying to so we might

be able to offer a different suggestion, or set your email program to

include the prior message.

Just my thoughts. I often want to assist, but have no idea what the issue

is, so I simply delete the message.

Richard

 

 

 

 

 

 

"It is a great thing to start life with a small number of really good books

which are your very own." __  Sir Arthur Conan Doyle

 

 

 

 

 

 


Re: Remote connections:

James Homuth
 

That's what I thought, but wanted to make certain I wasn't high.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: October-29-18 7:27 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:

I don't see how, unless you might be able to do it using Narrator because
you can theoretically get the audio, but its going to be a mess.

On Mon, 29 Oct 2018 17:12:12 -0400,
James Homuth wrote:

So wait. You can use Team viewer to access another computer without
having JAWS on it? Now this I'm interested in.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: October-29-18 5:10 PM
To: miketmote73@gmail.com
Cc: main@jfw.groups.io
Subject: Re: Remote connections:

Citric requires a onetime charge to Freedom Scientific now VISPERO of
$200.00.

The computer that is accessing a remote computer needs a licensed copy
of JAWS running but the server end just needs a copy of JAWS that has
to be installed by the network administrator. If network
administrators are unfimiliar with JAWS they will hesitate with the
installation of JAWS on the server.

You might want to look into Team Viewer as a way to access another
computer that doesn't have JAWS running on it for admin tech support.
It will require a copy of Team Viewer installed on both computers. If
it is a comercial business your are working for, you might want to
look into a legal licensed copy of Team Viewer if that will work for your
situation.

Original message:
Hi Charles. You are correct. JAWS Tandem requires that the screen
reader be installed on both computers. Remote access would also
require JAWS to be on your computer, and on the server side or
client computer. There are several ways to utilize Remote access.
That would depend on how the company does what they do to allow
someone like yourself to remote into their system. RDP, Remote
Desktop Protocol is one method. Also JAWS supports some Citrix
connections as well. Hope this helps.
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
charleseblack@att.net
Sent: Monday, October 29, 2018 4:18 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:
Sir:
Doesn't JAWS need to be on the destination computer in both cases?
Isn't the Tandem Server only accessible if both computers have JAWS
on them? Doesn't Remote Desktop require JAWES on both ends?
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Monday, October 29, 2018 4:13 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:
I'll take a shot:
JAWS has a feature called Tandem Direct which requires the remote
computer user to type a code to connect to the controler via the
Tandem server or, to answer your question, you can pay a one time
charge for a capability for JAWS to use the facility in Windows
called Remote Desktop to be able to connect and interact with the
remote computer with or without the need to depend on JAWS to be on
the remote
computer.

I don't think using a VPN would provide the necessary interaction of
JAWS to take control of the remote computer like connecting via the
Tandem server would provide.
I don't know of any other means of achieving what you're wanting to
do, but perhaps others will provide some input.
-------- Original Message --------
From: charleseblack@att.net
Sent: Monday, Oct 29, 2018 3:29 PM EST
To: main@jfw.groups.io
Subject: Remote connections:
Afternoon:
I can work as an IT resource for a non-profit organization. I will
need to remote into several machines to achieve my job. Is there a
tool which will allow me to, using jaws, remote into several
systems, achieve the task needed, and then to allow the person to
continue their work? I wish to do this remotely. Would VPN allow
that to happen? Is there a way to achieve this without having JAWS
on the other end; at least in the employee's systems? Thanks!
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 1:50 PM
To: main@jfw.groups.io
Subject: Re: OCR
Thanks.






From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR


Ed,


If you have any questions on any of the layered commands, do the
following:



JAWS+Spacebar
Then press the Question Mark Key
This will give you a general listing of layered commands and what
they do


Or, JAWS+Spacebar
then press one of the layered commands such as O, H, etc.
then press the question mark key.
This will give you specific options for that layered command.


Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer




----- Original Message -----
From: Ed Legge <mailto:edward.legge@gmail.com>
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Sent: Monday, October 29, 2018 10:33
Subject: Re: OCR


Thanks.




From: main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of John
Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: OCR


JAWS key plus space bar, then o, then d.


HTH,






John Doering
Administrative Pricing Asst


p. 4147783040 Extn:4063 t. 800-642-8778


NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you
are not the intended recipient, nor the employee or agent
responsible for delivering this message in confidence to the
intended recipient(s), you are hereby notified that you have
received this transmittal in error, and any review, dissemination,
distribution or copying of this transmittal or its attachments is
strictly prohibited.
If you have received this transmittal and/or attachments in error,
please notify me immediately by reply e-mail and then delete this
message, including any attachments.
From: main@jfw.groups.io <mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io <mailto:jfw@groups.io> >
Subject: OCR


What is the command for getting JAWS to read a PDF file with OCR?







.















--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Re: List request

denise avant <denise.avant@...>
 

Hi,

I just checked my settings, and outlook is the default e-mail client. I should also say that I sent one of my previous messages from the mail account on my iPhone. I think I have sent two, but I have forgotten what one of them was about. I recall that the other had to do with possibly having JAWS work on a Surface Go.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Homuth
Sent: Monday, October 29, 2018 6:09 AM
To: main@jfw.groups.io
Subject: Re: List request

 

Hello,

 

It sounds like your Outlook isn’t set up properly. This message came through just fine, but the fact it wants to open it up in windows Mail tells me whoever actually set up Outlook only did part of the job. This would also explain why I never received your email.

 

James,

List Admin

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of denise avant
Sent: October-28-18 10:45 PM
To: main@jfw.groups.io
Subject: Re: List request

 

Hello,

I am replying to this thread only because I have been having trouble posting directly to the list using MS Outlook, though I have joined it. So, just as a test, I have clicked on the e-mail address for the group seen in some of the posts. When I do that, I am sent to Windows Mail,  not Outlook, which is my mail client. I can read the mail from the group in Outlook. So, I am wondering if it is not possible to actually send a post to this group using Outlook? I did e-mail the list moderator with no response.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Sunday, October 28, 2018 11:50 AM
To: main@jfw.groups.io
Subject: Re: List request

 

I agree with Richard, when I read messages I delete them when I read the message and if another person replies a day later referring to something but he does not have the thread in his message I found it is often unclear what this refers to. I guess in such a case I just also delete he message since I may not be able torespond not knowing the context, but while a long thread may not be always useful it doesn’t bother me since the new reply is at the top (if it isn’t then that is not my problem) so I don’t have to read the entire thread, but if I do want to refer back to something then I can or if I look for a link that was in a message 5 replies further down the thread then it is easy to find..

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
Sent: Sunday, October 28, 2018 9:24 AM
To: main@jfw.groups.io
Subject: Re: List request

 

I think keeping the subject line clear and specific will help a lot, even if it needs to be changed/updated to fit a new thread from the original. Just my opinion.

 

Cheerfully,

 

Shirley Tracy

 

From: george b
Sent: Sunday, October 28, 2018 11:15 AM
To: main@jfw.groups.io
Subject: Re: List request

 

Thank you...i feel the same way how can we help if we do not know what your

asking about

 

-----Original Message-----

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner

Sent: October 28, 2018 8:13

To: JFW user list <main@jfw.groups.io>

Subject: List request

 

This is my Pet Peeve for the month:

Those of you, and there are several so I'm not pointing out anyone in

particular, on this list who have there email set to not quote the previous

message make it very difficult for those of us who want to help. If you do

not explain the context of your message, it often leaves me scratching my

head wondering what the heck the person is replying to.

So, please consider summarizing the answer you are replying to so we might

be able to offer a different suggestion, or set your email program to

include the prior message.

Just my thoughts. I often want to assist, but have no idea what the issue

is, so I simply delete the message.

Richard

 

 

 

 

 

 

"It is a great thing to start life with a small number of really good books

which are your very own." __  Sir Arthur Conan Doyle

 

 

 

 

 

 


Re: Remote connections:

John Covici
 

I don't see how, unless you might be able to do it using Narrator
because you can theoretically get the audio, but its going to be a
mess.

On Mon, 29 Oct 2018 17:12:12 -0400,
James Homuth wrote:

So wait. You can use Team viewer to access another computer without having
JAWS on it? Now this I'm interested in.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: October-29-18 5:10 PM
To: miketmote73@gmail.com
Cc: main@jfw.groups.io
Subject: Re: Remote connections:

Citric requires a onetime charge to Freedom Scientific now VISPERO of
$200.00.

The computer that is accessing a remote computer needs a licensed copy of
JAWS running but the server end just needs a copy of JAWS that has to be
installed by the network administrator. If network administrators are
unfimiliar with JAWS they will hesitate with the installation of JAWS on
the server.

You might want to look into Team Viewer as a way to access another computer
that doesn't have JAWS running on it for admin tech support.
It will require a copy of Team Viewer installed on both computers. If it is
a comercial business your are working for, you might want to look into a
legal licensed copy of Team Viewer if that will work for your situation.

Original message:
Hi Charles. You are correct. JAWS Tandem requires that the screen
reader be installed on both computers. Remote access would also
require JAWS to be on your computer, and on the server side or client
computer. There are several ways to utilize Remote access. That
would depend on how the company does what they do to allow someone
like yourself to remote into their system. RDP, Remote Desktop
Protocol is one method. Also JAWS supports some Citrix connections as
well. Hope this helps.
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
charleseblack@att.net
Sent: Monday, October 29, 2018 4:18 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:
Sir:
Doesn't JAWS need to be on the destination computer in both cases?
Isn't the Tandem Server only accessible if both computers have JAWS on
them? Doesn't Remote Desktop require JAWES on both ends?
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Monday, October 29, 2018 4:13 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:
I'll take a shot:
JAWS has a feature called Tandem Direct which requires the remote
computer user to type a code to connect to the controler via the
Tandem server or, to answer your question, you can pay a one time
charge for a capability for JAWS to use the facility in Windows called
Remote Desktop to be able to connect and interact with the remote
computer with or without the need to depend on JAWS to be on the remote
computer.

I don't think using a VPN would provide the necessary interaction of
JAWS to take control of the remote computer like connecting via the
Tandem server would provide.
I don't know of any other means of achieving what you're wanting to
do, but perhaps others will provide some input.
-------- Original Message --------
From: charleseblack@att.net
Sent: Monday, Oct 29, 2018 3:29 PM EST
To: main@jfw.groups.io
Subject: Remote connections:
Afternoon:
I can work as an IT resource for a non-profit organization. I will
need to remote into several machines to achieve my job. Is there a
tool which will allow me to, using jaws, remote into several systems,
achieve the task needed, and then to allow the person to continue
their work? I wish to do this remotely. Would VPN allow that to
happen? Is there a way to achieve this without having JAWS on the
other end; at least in the employee's systems? Thanks!
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 1:50 PM
To: main@jfw.groups.io
Subject: Re: OCR
Thanks.






From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR


Ed,


If you have any questions on any of the layered commands, do the
following:



JAWS+Spacebar
Then press the Question Mark Key
This will give you a general listing of layered commands and what they
do


Or, JAWS+Spacebar
then press one of the layered commands such as O, H, etc.
then press the question mark key.
This will give you specific options for that layered command.


Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer




----- Original Message -----
From: Ed Legge <mailto:edward.legge@gmail.com>
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Sent: Monday, October 29, 2018 10:33
Subject: Re: OCR


Thanks.




From: main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of John
Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: OCR


JAWS key plus space bar, then o, then d.


HTH,






John Doering
Administrative Pricing Asst


p. 4147783040 Extn:4063 t. 800-642-8778


NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you
are not the intended recipient, nor the employee or agent responsible
for delivering this message in confidence to the intended
recipient(s), you are hereby notified that you have received this
transmittal in error, and any review, dissemination, distribution or
copying of this transmittal or its attachments is strictly prohibited.
If you have received this transmittal and/or attachments in error,
please notify me immediately by reply e-mail and then delete this
message, including any attachments.
From: main@jfw.groups.io <mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io <mailto:jfw@groups.io> >
Subject: OCR


What is the command for getting JAWS to read a PDF file with OCR?







.















--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


a strange focus problem

Jed Barton <jedbarton@...>
 

Hey guys.

OK, so i am having a very strange problem with all my versions of
jaws. I'm trying to use a program, it's a piece of software used for
programming a 2 way radio. I need to focus on a list of contacts in
the radio. So, i can get to that list, and arrow up and down it with
no problem. The issue is i need to highlight 1 of those contacts. In
order to do that i am doing a left mouse. When i route my jaws to pc
cursor and do a left click, the cursor jumps up 2 contacts, in other
words it changes the focus of what i need to highlight. Any words of
wisdom here guys? I had someone looking at it on the screen, and
that's what it was doing. Any ideas?

Thanks,
Jed


Re: Remote connections:

James Homuth
 

So wait. You can use Team viewer to access another computer without having
JAWS on it? Now this I'm interested in.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: October-29-18 5:10 PM
To: miketmote73@gmail.com
Cc: main@jfw.groups.io
Subject: Re: Remote connections:

Citric requires a onetime charge to Freedom Scientific now VISPERO of
$200.00.

The computer that is accessing a remote computer needs a licensed copy of
JAWS running but the server end just needs a copy of JAWS that has to be
installed by the network administrator. If network administrators are
unfimiliar with JAWS they will hesitate with the installation of JAWS on
the server.

You might want to look into Team Viewer as a way to access another computer
that doesn't have JAWS running on it for admin tech support.
It will require a copy of Team Viewer installed on both computers. If it is
a comercial business your are working for, you might want to look into a
legal licensed copy of Team Viewer if that will work for your situation.

Original message:
Hi Charles. You are correct. JAWS Tandem requires that the screen
reader be installed on both computers. Remote access would also
require JAWS to be on your computer, and on the server side or client
computer. There are several ways to utilize Remote access. That
would depend on how the company does what they do to allow someone
like yourself to remote into their system. RDP, Remote Desktop
Protocol is one method. Also JAWS supports some Citrix connections as
well. Hope this helps.
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
charleseblack@att.net
Sent: Monday, October 29, 2018 4:18 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:
Sir:
Doesn't JAWS need to be on the destination computer in both cases?
Isn't the Tandem Server only accessible if both computers have JAWS on
them? Doesn't Remote Desktop require JAWES on both ends?
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Monday, October 29, 2018 4:13 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:
I'll take a shot:
JAWS has a feature called Tandem Direct which requires the remote
computer user to type a code to connect to the controler via the
Tandem server or, to answer your question, you can pay a one time
charge for a capability for JAWS to use the facility in Windows called
Remote Desktop to be able to connect and interact with the remote
computer with or without the need to depend on JAWS to be on the remote
computer.

I don't think using a VPN would provide the necessary interaction of
JAWS to take control of the remote computer like connecting via the
Tandem server would provide.
I don't know of any other means of achieving what you're wanting to
do, but perhaps others will provide some input.
-------- Original Message --------
From: charleseblack@att.net
Sent: Monday, Oct 29, 2018 3:29 PM EST
To: main@jfw.groups.io
Subject: Remote connections:
Afternoon:
I can work as an IT resource for a non-profit organization. I will
need to remote into several machines to achieve my job. Is there a
tool which will allow me to, using jaws, remote into several systems,
achieve the task needed, and then to allow the person to continue
their work? I wish to do this remotely. Would VPN allow that to
happen? Is there a way to achieve this without having JAWS on the
other end; at least in the employee's systems? Thanks!
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 1:50 PM
To: main@jfw.groups.io
Subject: Re: OCR
Thanks.






From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR


Ed,


If you have any questions on any of the layered commands, do the
following:



JAWS+Spacebar
Then press the Question Mark Key
This will give you a general listing of layered commands and what they
do


Or, JAWS+Spacebar
then press one of the layered commands such as O, H, etc.
then press the question mark key.
This will give you specific options for that layered command.


Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer




----- Original Message -----
From: Ed Legge <mailto:edward.legge@gmail.com>
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Sent: Monday, October 29, 2018 10:33
Subject: Re: OCR


Thanks.




From: main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of John
Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: OCR


JAWS key plus space bar, then o, then d.


HTH,






John Doering
Administrative Pricing Asst


p. 4147783040 Extn:4063 t. 800-642-8778


NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you
are not the intended recipient, nor the employee or agent responsible
for delivering this message in confidence to the intended
recipient(s), you are hereby notified that you have received this
transmittal in error, and any review, dissemination, distribution or
copying of this transmittal or its attachments is strictly prohibited.
If you have received this transmittal and/or attachments in error,
please notify me immediately by reply e-mail and then delete this
message, including any attachments.
From: main@jfw.groups.io <mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io <mailto:jfw@groups.io> >
Subject: OCR


What is the command for getting JAWS to read a PDF file with OCR?







.











Re: Remote connections:

Milton Ota <mota1252@...>
 

Citric requires a onetime charge to Freedom Scientific now VISPERO of $200.00.

The computer that is accessing a remote computer needs a licensed copy of JAWS running but the server end just needs a copy of JAWS that has to be installed by the network administrator. If network administrators are unfimiliar with JAWS they will hesitate with the installation of JAWS on the server.

You might want to look into Team Viewer as a way to access another computer that doesn't have JAWS running on it for admin tech support. It will require a copy of Team Viewer installed on both computers. If it is a comercial business your are working for, you might want to look into a legal licensed copy of Team Viewer if that will work for your situation.

Original message:

Hi Charles. You are correct. JAWS Tandem requires that the screen reader be installed on both computers. Remote access would also require JAWS to be on your computer, and on the server side or client computer. There are several ways to utilize Remote access. That would depend on how the company does what they do to allow someone like yourself to remote into their system. RDP, Remote Desktop Protocol is one method. Also JAWS supports some Citrix connections as well. Hope this helps.
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of charleseblack@att.net
Sent: Monday, October 29, 2018 4:18 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:
Sir:
Doesn't JAWS need to be on the destination computer in both cases? Isn't the Tandem Server only accessible if both computers have JAWS on them? Doesn't Remote Desktop require JAWES on both ends?
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Monday, October 29, 2018 4:13 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:
I'll take a shot:
JAWS has a feature called Tandem Direct which requires the remote computer user to type a code to connect to the controler via the Tandem server or, to answer your question, you can pay a one time charge for a capability for JAWS to use the facility in Windows called Remote Desktop to be able to connect and interact with the remote computer with or without the need to depend on JAWS to be on the remote computer.
I don't think using a VPN would provide the necessary interaction of JAWS to take control of the remote computer like connecting via the Tandem server would provide.
I don't know of any other means of achieving what you're wanting to do, but perhaps others will provide some input.
-------- Original Message --------
From: charleseblack@att.net
Sent: Monday, Oct 29, 2018 3:29 PM EST
To: main@jfw.groups.io
Subject: Remote connections:
Afternoon:
I can work as an IT resource for a non-profit organization. I will need to remote into several machines to achieve my job. Is there a tool which will allow me to, using jaws, remote into several systems, achieve the task needed, and then to allow the person to continue their work? I wish to do this remotely. Would VPN allow that to happen? Is there a way to achieve this without having JAWS on the other end; at least in the employee's systems? Thanks!
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 1:50 PM
To: main@jfw.groups.io
Subject: Re: OCR
Thanks.






From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR


Ed,


If you have any questions on any of the layered commands, do the following:


JAWS+Spacebar
Then press the Question Mark Key
This will give you a general listing of layered commands and what they do


Or, JAWS+Spacebar
then press one of the layered commands such as O, H, etc.
then press the question mark key.
This will give you specific options for that layered command.


Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer




----- Original Message -----
From: Ed Legge <mailto:edward.legge@gmail.com>
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Sent: Monday, October 29, 2018 10:33
Subject: Re: OCR


Thanks.




From: main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of John Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: OCR


JAWS key plus space bar, then o, then d.


HTH,






John Doering
Administrative Pricing Asst


p. 4147783040 Extn:4063 t. 800-642-8778


NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.
From: main@jfw.groups.io <mailto:main@jfw.groups.io> [mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io <mailto:jfw@groups.io> >
Subject: OCR


What is the command for getting JAWS to read a PDF file with OCR?







.











Re: Remote connections:

Ekstrand, Pamela A. -ND
 

Does the JAWS documentation indicate that JAWS does not have to be installed on a remote computer when connecting via RDP? If so, can someone point me to it?

Thanks,
Pam


________________________________________
From: main@jfw.groups.io [main@jfw.groups.io] on behalf of Mario [mrb620@hotmail.com]
Sent: Monday, October 29, 2018 4:45 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:

yes, for Tandem, JAWS is needed on the controller and remote computer,
but not for Remote Desktop.


-------- Original Message --------
From: charleseblack@att.net
Sent: Monday, Oct 29, 2018 4:18 PM EST
To: main@jfw.groups.io
Subject: Remote connections:

Sir:

Doesn't JAWS need to be on the destination computer in both cases? Isn't
the Tandem Server only accessible if both computers have JAWS on them?
Doesn't Remote Desktop require JAWES on both ends?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Monday, October 29, 2018 4:13 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:

I'll take a shot:

JAWS has a feature called Tandem Direct which requires the remote
computer user to type a code to connect to the controler via the Tandem
server or, to answer your question, you can pay a one time charge for a
capability for JAWS to use the facility in Windows called Remote Desktop
to be able to connect and interact with the remote computer with or
without the need to depend on JAWS to be on the remote computer.

I don't think using a VPN would provide the necessary interaction of
JAWS to take control of the remote computer like connecting via the
Tandem server would provide.

I don't know of any other means of achieving what you're wanting to do,
but perhaps others will provide some input.
-------- Original Message --------
From: charleseblack@att.net
Sent: Monday, Oct 29, 2018 3:29 PM EST
To: main@jfw.groups.io
Subject: Remote connections:

Afternoon:

I can work as an IT resource for a non-profit organization. I will need
to remote into several machines to achieve my job. Is there a tool which
will allow me to, using jaws, remote into several systems, achieve the
task needed, and then to allow the person to continue their work? I wish
to do this remotely. Would VPN allow that to happen? Is there a way to
achieve this without having JAWS on the other end; at least in the
employee's systems? Thanks!

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 1:50 PM
To: main@jfw.groups.io
Subject: Re: OCR

Thanks.







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR



Ed,



If you have any questions on any of the layered commands, do the following:



JAWS+Spacebar

Then press the Question Mark Key

This will give you a general listing of layered commands and what they do



Or, JAWS+Spacebar

then press one of the layered commands such as O, H, etc.

then press the question mark key.

This will give you specific options for that layered command.



Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer





----- Original Message -----

From: Ed Legge <mailto:edward.legge@gmail.com>

To: main@jfw.groups.io <mailto:main@jfw.groups.io>

Sent: Monday, October 29, 2018 10:33

Subject: Re: OCR



Thanks.





From: main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of John Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: OCR



JAWS key plus space bar, then o, then d.



HTH,







John Doering

Administrative Pricing Asst



p. 4147783040 Extn:4063 t. 800-642-8778



NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you are
not the intended recipient, nor the employee or agent responsible for
delivering this message in confidence to the intended recipient(s), you
are hereby notified that you have received this transmittal in error,
and any review, dissemination, distribution or copying of this
transmittal or its attachments is strictly prohibited. If you have
received this transmittal and/or attachments in error, please notify me
immediately by reply e-mail and then delete this message, including any
attachments.

From: main@jfw.groups.io <mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io <mailto:jfw@groups.io> >
Subject: OCR



What is the command for getting JAWS to read a PDF file with OCR?








.









.


Re: Remote connections:

James Homuth
 

JAWS is required to have at least the basics installed, though not necessarily speech, in order to connect via remote desktop if I'm not mistaken. There are instructions that say as much in the help files for it. Though if that changes in some future version of JAWS, I will be all over it.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: October-29-18 4:46 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:

yes, for Tandem, JAWS is needed on the controller and remote computer, but not for Remote Desktop.


-------- Original Message --------
From: charleseblack@att.net
Sent: Monday, Oct 29, 2018 4:18 PM EST
To: main@jfw.groups.io
Subject: Remote connections:

Sir:

Doesn't JAWS need to be on the destination computer in both cases? Isn't
the Tandem Server only accessible if both computers have JAWS on them?
Doesn't Remote Desktop require JAWES on both ends?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Monday, October 29, 2018 4:13 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:

I'll take a shot:

JAWS has a feature called Tandem Direct which requires the remote
computer user to type a code to connect to the controler via the Tandem
server or, to answer your question, you can pay a one time charge for a
capability for JAWS to use the facility in Windows called Remote Desktop
to be able to connect and interact with the remote computer with or
without the need to depend on JAWS to be on the remote computer.

I don't think using a VPN would provide the necessary interaction of
JAWS to take control of the remote computer like connecting via the
Tandem server would provide.

I don't know of any other means of achieving what you're wanting to do,
but perhaps others will provide some input.
-------- Original Message --------
From: charleseblack@att.net
Sent: Monday, Oct 29, 2018 3:29 PM EST
To: main@jfw.groups.io
Subject: Remote connections:

Afternoon:

I can work as an IT resource for a non-profit organization. I will need
to remote into several machines to achieve my job. Is there a tool which
will allow me to, using jaws, remote into several systems, achieve the
task needed, and then to allow the person to continue their work? I wish
to do this remotely. Would VPN allow that to happen? Is there a way to
achieve this without having JAWS on the other end; at least in the
employee's systems? Thanks!

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 1:50 PM
To: main@jfw.groups.io
Subject: Re: OCR

Thanks.







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR



Ed,



If you have any questions on any of the layered commands, do the following:



JAWS+Spacebar

Then press the Question Mark Key

This will give you a general listing of layered commands and what they do



Or, JAWS+Spacebar

then press one of the layered commands such as O, H, etc.

then press the question mark key.

This will give you specific options for that layered command.



Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer





----- Original Message -----

From: Ed Legge <mailto:edward.legge@gmail.com>

To: main@jfw.groups.io <mailto:main@jfw.groups.io>

Sent: Monday, October 29, 2018 10:33

Subject: Re: OCR



Thanks.





From: main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of John Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: OCR



JAWS key plus space bar, then o, then d.



HTH,







John Doering

Administrative Pricing Asst



p. 4147783040 Extn:4063 t. 800-642-8778



NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you are
not the intended recipient, nor the employee or agent responsible for
delivering this message in confidence to the intended recipient(s), you
are hereby notified that you have received this transmittal in error,
and any review, dissemination, distribution or copying of this
transmittal or its attachments is strictly prohibited. If you have
received this transmittal and/or attachments in error, please notify me
immediately by reply e-mail and then delete this message, including any
attachments.

From: main@jfw.groups.io <mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io <mailto:jfw@groups.io> >
Subject: OCR



What is the command for getting JAWS to read a PDF file with OCR?








.









.


Re: Remote connections:

Mario
 

yes, for Tandem, JAWS is needed on the controller and remote computer,
but not for Remote Desktop.

-------- Original Message --------
From: charleseblack@att.net
Sent: Monday, Oct 29, 2018 4:18 PM EST
To: main@jfw.groups.io
Subject: Remote connections:

Sir:

Doesn't JAWS need to be on the destination computer in both cases? Isn't
the Tandem Server only accessible if both computers have JAWS on them?
Doesn't Remote Desktop require JAWES on both ends?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Monday, October 29, 2018 4:13 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:

I'll take a shot:

JAWS has a feature called Tandem Direct which requires the remote
computer user to type a code to connect to the controler via the Tandem
server or, to answer your question, you can pay a one time charge for a
capability for JAWS to use the facility in Windows called Remote Desktop
to be able to connect and interact with the remote computer with or
without the need to depend on JAWS to be on the remote computer.

I don't think using a VPN would provide the necessary interaction of
JAWS to take control of the remote computer like connecting via the
Tandem server would provide.

I don't know of any other means of achieving what you're wanting to do,
but perhaps others will provide some input.
-------- Original Message --------
From: charleseblack@att.net
Sent: Monday, Oct 29, 2018 3:29 PM EST
To: main@jfw.groups.io
Subject: Remote connections:

Afternoon:

I can work as an IT resource for a non-profit organization. I will need
to remote into several machines to achieve my job. Is there a tool which
will allow me to, using jaws, remote into several systems, achieve the
task needed, and then to allow the person to continue their work? I wish
to do this remotely. Would VPN allow that to happen? Is there a way to
achieve this without having JAWS on the other end; at least in the
employee's systems? Thanks!

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 1:50 PM
To: main@jfw.groups.io
Subject: Re: OCR

Thanks.







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR



Ed,



If you have any questions on any of the layered commands, do the following:



JAWS+Spacebar

Then press the Question Mark Key

This will give you a general listing of layered commands and what they do



Or, JAWS+Spacebar

then press one of the layered commands such as O, H, etc.

then press the question mark key.

This will give you specific options for that layered command.



Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer





----- Original Message -----

From: Ed Legge <mailto:edward.legge@gmail.com>

To: main@jfw.groups.io <mailto:main@jfw.groups.io>

Sent: Monday, October 29, 2018 10:33

Subject: Re: OCR



Thanks.





From: main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of John Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: OCR



JAWS key plus space bar, then o, then d.



HTH,







John Doering

Administrative Pricing Asst



p. 4147783040 Extn:4063 t. 800-642-8778



NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you are
not the intended recipient, nor the employee or agent responsible for
delivering this message in confidence to the intended recipient(s), you
are hereby notified that you have received this transmittal in error,
and any review, dissemination, distribution or copying of this
transmittal or its attachments is strictly prohibited. If you have
received this transmittal and/or attachments in error, please notify me
immediately by reply e-mail and then delete this message, including any
attachments.

From: main@jfw.groups.io <mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io <mailto:jfw@groups.io> >
Subject: OCR



What is the command for getting JAWS to read a PDF file with OCR?








.









.


Re: Remote connections:

John Covici
 

I don't think there is any way to do that. They need Jaws on the
other end of the connection. If this is a job, maybe your employer
would pay for Aira.

On Mon, 29 Oct 2018 15:29:17 -0400,
charleseblack@att.net wrote:

Afternoon:

I can work as an IT resource for a non-profit organization. I will need to
remote into several machines to achieve my job. Is there a tool which will
allow me to, using jaws, remote into several systems, achieve the task
needed, and then to allow the person to continue their work? I wish to do
this remotely. Would VPN allow that to happen? Is there a way to achieve
this without having JAWS on the other end; at least in the employee's
systems? Thanks!

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 1:50 PM
To: main@jfw.groups.io
Subject: Re: OCR

Thanks.







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR



Ed,



If you have any questions on any of the layered commands, do the following:



JAWS+Spacebar

Then press the Question Mark Key

This will give you a general listing of layered commands and what they do



Or, JAWS+Spacebar

then press one of the layered commands such as O, H, etc.

then press the question mark key.

This will give you specific options for that layered command.



Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer





----- Original Message -----

From: Ed Legge <mailto:edward.legge@gmail.com>

To: main@jfw.groups.io <mailto:main@jfw.groups.io>

Sent: Monday, October 29, 2018 10:33

Subject: Re: OCR



Thanks.





From: main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io
<mailto:main@jfw.groups.io> > On Behalf Of John Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: OCR



JAWS key plus space bar, then o, then d.



HTH,







John Doering

Administrative Pricing Asst



p. 4147783040 Extn:4063 t. 800-642-8778



NOTICE: The information contained in this email and any document attached
hereto is intended only for the named recipient(s). If you are not the
intended recipient, nor the employee or agent responsible for delivering
this message in confidence to the intended recipient(s), you are hereby
notified that you have received this transmittal in error, and any review,
dissemination, distribution or copying of this transmittal or its
attachments is strictly prohibited. If you have received this transmittal
and/or attachments in error, please notify me immediately by reply e-mail
and then delete this message, including any attachments.

From: main@jfw.groups.io <mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io <mailto:jfw@groups.io> >
Subject: OCR



What is the command for getting JAWS to read a PDF file with OCR?







--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Re: Remote connections:

Michael Mote
 

Hi Charles. You are correct. JAWS Tandem requires that the screen reader be installed on both computers. Remote access would also require JAWS to be on your computer, and on the server side or client computer. There are several ways to utilize Remote access. That would depend on how the company does what they do to allow someone like yourself to remote into their system. RDP, Remote Desktop Protocol is one method. Also JAWS supports some Citrix connections as well. Hope this helps.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of charleseblack@att.net
Sent: Monday, October 29, 2018 4:18 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:

Sir:

Doesn't JAWS need to be on the destination computer in both cases? Isn't the Tandem Server only accessible if both computers have JAWS on them? Doesn't Remote Desktop require JAWES on both ends?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Monday, October 29, 2018 4:13 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:

I'll take a shot:

JAWS has a feature called Tandem Direct which requires the remote computer user to type a code to connect to the controler via the Tandem server or, to answer your question, you can pay a one time charge for a capability for JAWS to use the facility in Windows called Remote Desktop to be able to connect and interact with the remote computer with or without the need to depend on JAWS to be on the remote computer.

I don't think using a VPN would provide the necessary interaction of JAWS to take control of the remote computer like connecting via the Tandem server would provide.

I don't know of any other means of achieving what you're wanting to do, but perhaps others will provide some input.
-------- Original Message --------
From: charleseblack@att.net
Sent: Monday, Oct 29, 2018 3:29 PM EST
To: main@jfw.groups.io
Subject: Remote connections:

Afternoon:

I can work as an IT resource for a non-profit organization. I will need to remote into several machines to achieve my job. Is there a tool which will allow me to, using jaws, remote into several systems, achieve the task needed, and then to allow the person to continue their work? I wish to do this remotely. Would VPN allow that to happen? Is there a way to achieve this without having JAWS on the other end; at least in the employee's systems? Thanks!

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 1:50 PM
To: main@jfw.groups.io
Subject: Re: OCR

Thanks.







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR



Ed,



If you have any questions on any of the layered commands, do the following:



JAWS+Spacebar

Then press the Question Mark Key

This will give you a general listing of layered commands and what they do



Or, JAWS+Spacebar

then press one of the layered commands such as O, H, etc.

then press the question mark key.

This will give you specific options for that layered command.



Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer





----- Original Message -----

From: Ed Legge <mailto:edward.legge@gmail.com>

To: main@jfw.groups.io <mailto:main@jfw.groups.io>

Sent: Monday, October 29, 2018 10:33

Subject: Re: OCR



Thanks.





From: main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of John Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: OCR



JAWS key plus space bar, then o, then d.



HTH,







John Doering

Administrative Pricing Asst



p. 4147783040 Extn:4063 t. 800-642-8778



NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.

From: main@jfw.groups.io <mailto:main@jfw.groups.io> [mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io <mailto:jfw@groups.io> >
Subject: OCR



What is the command for getting JAWS to read a PDF file with OCR?








.


Re: Remote connections:

charleseblack@...
 

Sir:

Doesn't JAWS need to be on the destination computer in both cases? Isn't the Tandem Server only accessible if both computers have JAWS on them? Doesn't Remote Desktop require JAWES on both ends?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Monday, October 29, 2018 4:13 PM
To: main@jfw.groups.io
Subject: Re: Remote connections:

I'll take a shot:

JAWS has a feature called Tandem Direct which requires the remote computer user to type a code to connect to the controler via the Tandem server or, to answer your question, you can pay a one time charge for a capability for JAWS to use the facility in Windows called Remote Desktop to be able to connect and interact with the remote computer with or without the need to depend on JAWS to be on the remote computer.

I don't think using a VPN would provide the necessary interaction of JAWS to take control of the remote computer like connecting via the Tandem server would provide.

I don't know of any other means of achieving what you're wanting to do, but perhaps others will provide some input.
-------- Original Message --------
From: charleseblack@att.net
Sent: Monday, Oct 29, 2018 3:29 PM EST
To: main@jfw.groups.io
Subject: Remote connections:

Afternoon:

I can work as an IT resource for a non-profit organization. I will need to remote into several machines to achieve my job. Is there a tool which will allow me to, using jaws, remote into several systems, achieve the task needed, and then to allow the person to continue their work? I wish to do this remotely. Would VPN allow that to happen? Is there a way to achieve this without having JAWS on the other end; at least in the employee's systems? Thanks!

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 1:50 PM
To: main@jfw.groups.io
Subject: Re: OCR

Thanks.







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR



Ed,



If you have any questions on any of the layered commands, do the following:



JAWS+Spacebar

Then press the Question Mark Key

This will give you a general listing of layered commands and what they do



Or, JAWS+Spacebar

then press one of the layered commands such as O, H, etc.

then press the question mark key.

This will give you specific options for that layered command.



Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer





----- Original Message -----

From: Ed Legge <mailto:edward.legge@gmail.com>

To: main@jfw.groups.io <mailto:main@jfw.groups.io>

Sent: Monday, October 29, 2018 10:33

Subject: Re: OCR



Thanks.





From: main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of John Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: OCR



JAWS key plus space bar, then o, then d.



HTH,







John Doering

Administrative Pricing Asst



p. 4147783040 Extn:4063 t. 800-642-8778



NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.

From: main@jfw.groups.io <mailto:main@jfw.groups.io> [mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io <mailto:jfw@groups.io> >
Subject: OCR



What is the command for getting JAWS to read a PDF file with OCR?








.


Re: Remote connections:

Mario
 

I'll take a shot:

JAWS has a feature called Tandem Direct which requires the remote
computer user to type a code to connect to the controler via the Tandem
server or, to answer your question, you can pay a one time charge for a
capability for JAWS to use the facility in Windows called Remote Desktop
to be able to connect and interact with the remote computer with or
without the need to depend on JAWS to be on the remote computer.

I don't think using a VPN would provide the necessary interaction of
JAWS to take control of the remote computer like connecting via the
Tandem server would provide.

I don't know of any other means of achieving what you're wanting to do,
but perhaps others will provide some input.

-------- Original Message --------
From: charleseblack@att.net
Sent: Monday, Oct 29, 2018 3:29 PM EST
To: main@jfw.groups.io
Subject: Remote connections:

Afternoon:

I can work as an IT resource for a non-profit organization. I will need to
remote into several machines to achieve my job. Is there a tool which will
allow me to, using jaws, remote into several systems, achieve the task
needed, and then to allow the person to continue their work? I wish to do
this remotely. Would VPN allow that to happen? Is there a way to achieve
this without having JAWS on the other end; at least in the employee's
systems? Thanks!

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 1:50 PM
To: main@jfw.groups.io
Subject: Re: OCR

Thanks.







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR



Ed,



If you have any questions on any of the layered commands, do the following:



JAWS+Spacebar

Then press the Question Mark Key

This will give you a general listing of layered commands and what they do



Or, JAWS+Spacebar

then press one of the layered commands such as O, H, etc.

then press the question mark key.

This will give you specific options for that layered command.



Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer





----- Original Message -----

From: Ed Legge <mailto:edward.legge@gmail.com>

To: main@jfw.groups.io <mailto:main@jfw.groups.io>

Sent: Monday, October 29, 2018 10:33

Subject: Re: OCR



Thanks.





From: main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io
<mailto:main@jfw.groups.io> > On Behalf Of John Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: OCR



JAWS key plus space bar, then o, then d.



HTH,







John Doering

Administrative Pricing Asst



p. 4147783040 Extn:4063 t. 800-642-8778



NOTICE: The information contained in this email and any document attached
hereto is intended only for the named recipient(s). If you are not the
intended recipient, nor the employee or agent responsible for delivering
this message in confidence to the intended recipient(s), you are hereby
notified that you have received this transmittal in error, and any review,
dissemination, distribution or copying of this transmittal or its
attachments is strictly prohibited. If you have received this transmittal
and/or attachments in error, please notify me immediately by reply e-mail
and then delete this message, including any attachments.

From: main@jfw.groups.io <mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io <mailto:jfw@groups.io> >
Subject: OCR



What is the command for getting JAWS to read a PDF file with OCR?








.


Remote connections:

charleseblack@...
 

Afternoon:

I can work as an IT resource for a non-profit organization. I will need to
remote into several machines to achieve my job. Is there a tool which will
allow me to, using jaws, remote into several systems, achieve the task
needed, and then to allow the person to continue their work? I wish to do
this remotely. Would VPN allow that to happen? Is there a way to achieve
this without having JAWS on the other end; at least in the employee's
systems? Thanks!

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 1:50 PM
To: main@jfw.groups.io
Subject: Re: OCR

Thanks.







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR



Ed,



If you have any questions on any of the layered commands, do the following:



JAWS+Spacebar

Then press the Question Mark Key

This will give you a general listing of layered commands and what they do



Or, JAWS+Spacebar

then press one of the layered commands such as O, H, etc.

then press the question mark key.

This will give you specific options for that layered command.



Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer





----- Original Message -----

From: Ed Legge <mailto:edward.legge@gmail.com>

To: main@jfw.groups.io <mailto:main@jfw.groups.io>

Sent: Monday, October 29, 2018 10:33

Subject: Re: OCR



Thanks.





From: main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io
<mailto:main@jfw.groups.io> > On Behalf Of John Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: OCR



JAWS key plus space bar, then o, then d.



HTH,







John Doering

Administrative Pricing Asst



p. 4147783040 Extn:4063 t. 800-642-8778



NOTICE: The information contained in this email and any document attached
hereto is intended only for the named recipient(s). If you are not the
intended recipient, nor the employee or agent responsible for delivering
this message in confidence to the intended recipient(s), you are hereby
notified that you have received this transmittal in error, and any review,
dissemination, distribution or copying of this transmittal or its
attachments is strictly prohibited. If you have received this transmittal
and/or attachments in error, please notify me immediately by reply e-mail
and then delete this message, including any attachments.

From: main@jfw.groups.io <mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io <mailto:jfw@groups.io> >
Subject: OCR



What is the command for getting JAWS to read a PDF file with OCR?


Re: Outlook Issue

 

A straight "Reply" to a groups.io message in e-mail always goes to the entire group.  That's the way message lists/groups work.  The options at the bottom of each message presented as links are for when you want exceptions to the default behavior.

--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

  If you remove all the homosexuals and homosexual influences from what is generally regarded as American culture, you are pretty much left with Let's Make a Deal.

          ~ Fran Lebowitz


Re: Outlook Issue

Dave...
 


This one -- entire group.
 
Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer
 
 

----- Original Message -----
Sent: Monday, October 29, 2018 10:48
Subject: Re: Outlook Issue

OK, I see the links at the bottom of the messages.  I have just been hitting Control+R to respond.  Does this go out to the entire group, or just to the last person in the thread in the message on my computer?
 
Love in Christ
Marty
 
Sent: Monday, October 29, 2018 11:07 AM
Subject: Re: Outlook Issue
 
Marty,

           The Private button is present on the Groups.io web interface (on groups that allow private messaging) and appears directly below the compose box.  It allows you to send a response only to the individual whose message you're responding to.

           You can get the same effect in the e-mail interface using the "Reply to Sender" link at the bottom of each and every message that gets sent out by Groups.io, presuming you're not using plain text for your message format.
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

  If you remove all the homosexuals and homosexual influences from what is generally regarded as American culture, you are pretty much left with Let's Make a Deal.

          ~ Fran Lebowitz


Summary of JAWS Layered Commands

Dave...
 

Ed,
 
Here's what you get when you press JAWS+Spacebar followed by a question mark:
 
General Commands
 
The following are commands generally available in this key layer.
Commands Search feature = J.
Toggle Speech between full speech and less speech mode = S.
While in Less Speech mode, toggle between Speech on Demand or full mute = Shift + S.
Review recent history of what was spoken = H.
Clear previous history of what was recently spoken = Shift + H.
ResearchIt feature = R.
View text currently on the clipboard = C.
Temporary Lock keyboard toggle on/off = L.
Temporary bypass using current User Settings and use JAWS factory default = Z.
 

Editors, Email, and Word Processors
 
The following commands are available in editable documents.
Text Analyzer On/Off = A.
 

Messaging Applications
 
The following commands are available while the specific messaging program is running.
Repeat last background notification from Skype = Shift + R.
Switch to your recent Windows Live Messages = Number row 0 through 5.
 

Secondary Layers
 
The following keys activate a secondary layer. You can press Question mark in any of these layers to show a help screen.
Mouse Echo layer = E.
OCR layer = O.
Activate Table Navigation layer while in a table = T.
 
 
Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer
 
 

----- Original Message -----
From: Dave...
Sent: Monday, October 29, 2018 10:45
Subject: Re: OCR

Ed,
 
If you have any questions on any of the layered commands, do the following:
 
JAWS+Spacebar
Then press the Question Mark Key
This will give you a general listing of layered commands and what they do
 
Or, JAWS+Spacebar
then press one of the layered commands such as O, H, etc.
then press the question mark key.
This will give you specific options for that layered command.
 
Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer
 
 
----- Original Message -----
From: Ed Legge
Sent: Monday, October 29, 2018 10:33
Subject: Re: OCR

Thanks.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io
Subject: Re: OCR

 

JAWS key plus space bar, then o, then d.

 

HTH,

 

 

 

John Doering

Administrative Pricing Asst 

 

p. 4147783040 Extn:4063  t. 800-642-8778

 

NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io>
Subject: OCR

 

What is the command for getting JAWS to read a PDF file with OCR?