Date   

Re: signing in after start up

Jason White
 

My laptop has a fingerprint sensor, so all I have to do is to touch the sensor at the sign-in dialog - no typing of a password required, and security is maintained.

On 10/24/18, 08:51, "Richard Turner" <main@jfw.groups.io on behalf of richardturner42@outlook.com> wrote:

Hi,
It is not recommended to turn off the sign in because it leaves your system completely open to anyone who might access your computer. As I recall you are on Windows 10, if so, tap the Windows key, type account and hit enter.
Arrow down to sign in options (I think it is called) and you can change things in there.

You can turn on the Windows startup sound in the Sound schemes. I think there is something about Fast Startup skipping the sound but I don't recall those steps right now. Not enough coffee this morning, grin.

Richard

“Definition of an expert: An ex is a has-been and a spirt is a drip under pressure.” – Bruce U. Utah Phillips

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Val Paul
Sent: Wednesday, October 24, 2018 3:01 AM
To: main@jfw.groups.io
Subject: signing in after start up

Hi!

Can anyone tell me if you have to log in every time you start up your pc, or is there away you can avoid doing so?

Also, can you still get the jingle on the start up menue?

Nice to be back on the list with everyone.


Val Paul.


Re: signing in after start up

Bill White <billwhite92701@...>
 

Hi, Val. You can still get the Startup music. It depends how your computer was set up. If you have a local Windows account, it is very easy to remove the password so you don't need to log in every time the computer starts. If you have an account which was set up to log in with Microsoft, it is more difficult.

Did you give up the Mac, Val?

Nice to hear from you again.

Bill White

billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Val Paul
Sent: Wednesday, October 24, 2018 3:01 AM
To: main@jfw.groups.io
Subject: signing in after start up

Hi!

Can anyone tell me if you have to log in every time you start up your
pc, or is there away you can avoid doing so?

Also, can you still get the jingle on the start up menue?

Nice to be back on the list with everyone.


Val Paul.


Re: signing in after start up

Richard Turner
 

Hi,
It is not recommended to turn off the sign in because it leaves your system completely open to anyone who might access your computer. As I recall you are on Windows 10, if so, tap the Windows key, type account and hit enter.
Arrow down to sign in options (I think it is called) and you can change things in there.

You can turn on the Windows startup sound in the Sound schemes. I think there is something about Fast Startup skipping the sound but I don't recall those steps right now. Not enough coffee this morning, grin.

Richard

“Definition of an expert: An ex is a has-been and a spirt is a drip under pressure.” – Bruce U. Utah Phillips

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Val Paul
Sent: Wednesday, October 24, 2018 3:01 AM
To: main@jfw.groups.io
Subject: signing in after start up

Hi!

Can anyone tell me if you have to log in every time you start up your pc, or is there away you can avoid doing so?

Also, can you still get the jingle on the start up menue?

Nice to be back on the list with everyone.


Val Paul.


signing in after start up

Val Paul
 

Hi!

Can anyone tell me if you have to log in every time you start up your pc, or is there away you can avoid doing so?

Also, can you still get the jingle on the start up menue?

Nice to be back on the list with everyone.


Val Paul.


Re: Quieting JAWS for defined text string

Mario
 

you can use the dictionary manager to replace a certain string of text
with what ever you want JAWS to announce in stead of that string of text.

-------- Original Message --------
From: Kramlinger, Keith G., M.D. via Groups.Io
[mailto:kramlinger.keith=mayo.edu@groups.io]
Sent: Tuesday, Oct 23, 2018 2:21 PM EST
To: jfw@groups.io
Subject: Quieting JAWS for defined text string

Hi,

I have forgotten how to tell JAWS how to skip over a string of text that
I don’t want to hear all the time. Can someone please refresh my memory?

Thanks in advance. Keith


Re: difficulty uploading large file

Marty Hutchings
 

I don’t know what a rar file is, but have you tried Dropbox?
 
Love in Christ
Marty
 

From: Tom
Sent: Monday, October 22, 2018 11:02 PM
Subject: difficulty uploading large file
 

Hi,

 

Using latest Filezilla,I am attempting to upload a fairly large rar file to an FTP site and although the file test extracts  on my system without errors, it will not extract at the other end.  This has been attempted numerous times with the same result.

 

Does anyone know if this is because of the rar format being used or some other problem. What if the zip or some other format was used instead.

 

Failing that, how  can I use one of the sites where a file can be uploaded   and then downloaded by another person? Although I have used one of these sites to download a file, I know nothing about uploading a file and making it available for another person.

 

Thanks

Tom

 

 


Re: difficulty uploading large file

Jason White
 

I would suggest verifying the md5 or SHA-256 hashes once the file is transferred to the remote end.

https://www.maketecheasier.com/verify-md5-sha-1-sha-256-checksum-windows10/

If they don’t match, something went wrong with the data transfer.

 

From: <main@jfw.groups.io> on behalf of JM Casey <crystallogic@...>
Reply-To: <main@jfw.groups.io>
Date: Tuesday, October 23, 2018 at 14:23
To: <main@jfw.groups.io>
Subject: Re: difficulty uploading large file

 

Hm, how large is the file?

Somehow I doubt this is a problem with Filezilla.

Have you tried on more than one ftp site?

Might be a problem on the remote end, since the file extracts fine on yours.

 

I personally use sendspace, but it is slow, for uploading large files especially. It’s a pain but I have a paid account and basically unlimited storage.

Many people use dropbox today and I’m sure someone could give you pointers about that if that’s what you need.

But FTP is pretty tried and true, you know?

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom
Sent: October 23, 2018 12:02 AM
To: main@jfw.groups.io
Subject: difficulty uploading large file

 

Hi,

 

Using latest Filezilla,I am attempting to upload a fairly large rar file to an FTP site and although the file test extracts  on my system without errors, it will not extract at the other end.  This has been attempted numerous times with the same result.

 

Does anyone know if this is because of the rar format being used or some other problem. What if the zip or some other format was used instead.

Failing that, how  can I use one of the sites where a file can be uploaded   and then downloaded by another person? Although I have used one of these sites to download a file, I know nothing about uploading a file and making it available for another person.

 

Thanks

Tom

 

 


Re: difficulty uploading large file

JM Casey <crystallogic@...>
 

Hm, how large is the file?

Somehow I doubt this is a problem with Filezilla.

Have you tried on more than one ftp site?

Might be a problem on the remote end, since the file extracts fine on yours.

 

I personally use sendspace, but it is slow, for uploading large files especially. It’s a pain but I have a paid account and basically unlimited storage.

Many people use dropbox today and I’m sure someone could give you pointers about that if that’s what you need.

But FTP is pretty tried and true, you know?

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom
Sent: October 23, 2018 12:02 AM
To: main@jfw.groups.io
Subject: difficulty uploading large file

 

Hi,

 

Using latest Filezilla,I am attempting to upload a fairly large rar file to an FTP site and although the file test extracts  on my system without errors, it will not extract at the other end.  This has been attempted numerous times with the same result.

 

Does anyone know if this is because of the rar format being used or some other problem. What if the zip or some other format was used instead.

Failing that, how  can I use one of the sites where a file can be uploaded   and then downloaded by another person? Although I have used one of these sites to download a file, I know nothing about uploading a file and making it available for another person.

 

Thanks

Tom

 

 


Quieting JAWS for defined text string

Kramlinger, Keith G., M.D.
 

Hi,

 

I have forgotten how to tell JAWS how to skip over a string of text that I don’t want to hear all the time. Can someone please refresh my memory?

 

Thanks in advance. Keith


Re: calendar on web site

Kevin Meyers <kevinmeyers@...>
 

You are correct, the site is poorly coded. The site is wasa.org. That is Wisconsin Adaptive Sports Association. The home page has way to much text. Jaws reformats the screen and what shows up at the bottom of the screen for someone with sight, appears in the middle of the screen when Jaws reads it. I’m using Jaws2018 most recent version. I did talk with the person that makes changes to the site expressing my concerns. The sport of goal ball is the first sport that has been recently added. Today or tomorrow there would be some changes made. Let me know what you find. The calendar is on the page that comes up when you press enter on the ‘master calendar’ link. There were to many changes I wanted to provide. I thought it would be good to make changes in stages.

 

Cheers,

 

Kevin

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dean Martineau
Sent: Tuesday, October 23, 2018 11:04 AM
To: main@jfw.groups.io
Subject: Re: calendar on web site

 

The site is probably poorly coded.  It would be interesting to compare how other screen readers handle it, if you want to give the Url.  It may also matter what version of JAWS you are running. If there’s a way to get JAWS to change its view of such sites, I don’t know about it.

 

Thought-provoking reading: http://bahaiteachings.org

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kevin Meyers
Sent: Tuesday, October 23, 2018 11:48 AM
To: jfw@groups.io
Subject: calendar on web site

 

Hello,

 

On a web site there is a calendar used to show dates and time of sporting events. Jaws reads it as three different tables. The first one is the day of the week (Sun, Mon, Tue, etc). Then next table shows the DD (1, 2, 3, 4, etc. The third table shows the time first on the table and then the actual event.

 

Is there a way to make Jaws read the calendar so it shows day of week  (Sun, Mon, Tue, etc), DD (1, 2, 3, etc) and the time and actual event on one line of one table?

 

Cheers,

 

Kevin

 


Re: calendar on web site

Dean Martineau <topdot@...>
 

The site is probably poorly coded.  It would be interesting to compare how other screen readers handle it, if you want to give the Url.  It may also matter what version of JAWS you are running. If there’s a way to get JAWS to change its view of such sites, I don’t know about it.

 

Thought-provoking reading: http://bahaiteachings.org

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kevin Meyers
Sent: Tuesday, October 23, 2018 11:48 AM
To: jfw@groups.io
Subject: calendar on web site

 

Hello,

 

On a web site there is a calendar used to show dates and time of sporting events. Jaws reads it as three different tables. The first one is the day of the week (Sun, Mon, Tue, etc). Then next table shows the DD (1, 2, 3, 4, etc. The third table shows the time first on the table and then the actual event.

 

Is there a way to make Jaws read the calendar so it shows day of week  (Sun, Mon, Tue, etc), DD (1, 2, 3, etc) and the time and actual event on one line of one table?

 

Cheers,

 

Kevin

 


calendar on web site

Kevin Meyers <kevinmeyers@...>
 

Hello,

 

On a web site there is a calendar used to show dates and time of sporting events. Jaws reads it as three different tables. The first one is the day of the week (Sun, Mon, Tue, etc). Then next table shows the DD (1, 2, 3, 4, etc. The third table shows the time first on the table and then the actual event.

 

Is there a way to make Jaws read the calendar so it shows day of week  (Sun, Mon, Tue, etc), DD (1, 2, 3, etc) and the time and actual event on one line of one table?

 

Cheers,

 

Kevin

 


difficulty uploading large file

Tom <tomcat509@...>
 

Hi,

 

Using latest Filezilla,I am attempting to upload a fairly large rar file to an FTP site and although the file test extracts  on my system without errors, it will not extract at the other end.  This has been attempted numerous times with the same result.

 

Does anyone know if this is because of the rar format being used or some other problem. What if the zip or some other format was used instead.

 

Failing that, how  can I use one of the sites where a file can be uploaded   and then downloaded by another person? Although I have used one of these sites to download a file, I know nothing about uploading a file and making it available for another person.

 

Thanks

Tom

 

 


netstatcommand and jaws

pmbeardy@...
 

hi, netstat command what interval would be best? 4 secs. 10 secs. or never... thanks 


Re: Office 365 Excel 2016 and Jaws 2018 Issues

Van Lant, Robin
 

Yes, if you want to autofit the longest entry anywhere in the column, you would need to first select the column. Often I already know that I am in the cell with the longest entry, so I can just do the autofit option without selecting the whole column first.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Monday, October 22, 2018 3:47 PM
To: main@jfw.groups.io
Subject: Re: Office 365 Excel 2016 and Jaws 2018 Issues

Robin, I think you mean. alt o c a. will auto fit. but doesn't the column have to be selected first to accommodate the longest entry in the column (with a control spacebar)?



-------- Original Message --------
From: Van Lant, Robin via Groups.Io
[mailto:Robin_Van_Lant=Key.com@groups.io]
Sent: Monday, Oct 22, 2018 5:16 PM EST
To: main@jfw.groups.io
Subject: Office 365 Excel 2016 and Jaws 2018 Issues

I heavily use Excel 2016 in Windows 10 with JAWS 2018. I moved to JAWS from Window Eyes as the same time I moved to Win 10 and Office 2016, so I'm not really able to compare JAWS in the two versions of Excel. The only real issue I have in Excel is a noticeable lag when opening large files where autofilters are turned on.

As for column width, I use the old Excel 2003 keyboard shortcut that still works. Hit Alt C (think Column) and then w to open a small edit box that tells you current width and allows you to change the entry.
Also, Alt C then A will autofit the width.


Robin
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Prewitt
Sent: Tuesday, October 16, 2018 10:34 AM
To: main@jfw.groups.io
Subject: Re: Office 365 Excel 2016 and Jaws 2018 Issues

I do agree that we will have to move to Excel 2016 sooner rather than later. So, it sounds like they have moved things from the context menu into the ribbon.
On Oct 16, 2018, at 11:03 AM, Sieghard Weitzel <sieghard@live.ca> wrote:

Well, he will have to learn where to find it or remember the shortcut keys, column width is Alt+H followed by O and W Also, I believe there are ways to add things to the context menu with various ttweaks, you'd have to Google this, but I'm almost certain I read there is a way to add things to the context menu.
I found it took a bit to get used to Office 2013 and later 2016 which isn't so different, but it was quite a change from Office 2010, but you can't stay on 2010 forever so one might as well deal with it.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Prewitt
Sent: Tuesday, October 16, 2018 8:50 AM
To: main@jfw.groups.io
Subject: Re: Office 365 Excel 2016 and Jaws 2018 Issues

He uses Excel, Outlook, and Word primarily. The ribbon is in Excel 2010. He reports the column width is no longer in the context menu in Excel 2016.
On Oct 16, 2018, at 10:41 AM, Sieghard Weitzel <sieghard@live.ca> wrote:

What other applications do you or your employee need to use? If it's primarily Office then upgrading to Windows 10 is fine, it is very stabil and Office works well.
I know you mentioned he can't change the width of columns and so on, if he came from Excel 2010, are you sure he knows how to do it, if I remember correctly, didn't Excel 2010 still use menus or di dit have ribbon menus already?
If he has to use older applications and if he uses the Jaws cursor a lot there is a good chance he will lose that in Windows 10.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Prewitt
Sent: Monday, October 15, 2018 7:29 PM
To: main@jfw.groups.io
Subject: Re: Office 365 Excel 2016 and Jaws 2018 Issues

I will attempt an Office repair. As for Windows 10, do others find better Jaws 2018/Excel 2016(Office 365) stability under Windows 10 rather than Windows 7? Are there any adjustments that I can make in Jaws or Excel to make them work better under Windows 7?

Thank you,

Brian
On Oct 15, 2018, at 9:17 PM, Brian Prewitt <bprewitt@msblind.org> wrote:

I have reported it. They tell me to do an Office repair and/or move to Windows 10.
On Oct 15, 2018, at 9:12 PM, Alyssa <lyssassong@gmail.com> wrote:

Contact FS, and report this. I also have issues with JAWS 2018 and Office 365. Mine are with Word. I cannot properly read information in tables, so I can see how this would transfer over to Excel.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Prewitt
Sent: Monday, October 15, 2018 10:05 PM
To: jfw@groups.io
Subject: Office 365 Excel 2016 and Jaws 2018 Issues

Hi List,

One of my executives is having quite a few issues with Jaws 2018 and Office 365 Excel 2016, the latest build of both under Windows 7. So much so that I have installed excel 2010 on his computer in order for him to get work done. He is reporting the following issues. Jaws becomes silent when saving files, formulas aren’t read to him, he will lose an hour of work randomly, he can’t widen columns, add new sheets, rename sheets, etc. All of these things and others I may not have mentioned he can do in Excel 2010. Any suggestions are greatly appreciated.

Regards,

Brian



























This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to mailto:DNERequests@key.com with 'No Promotional E-mails' in the SUBJECT line.


Re: Office 365 Excel 2016 and Jaws 2018 Issues

Mario
 

Robin, I think you mean. alt o c a. will auto fit. but doesn't the
column have to be selected first to accommodate the longest entry in the
column (with a control spacebar)?

-------- Original Message --------
From: Van Lant, Robin via Groups.Io
[mailto:Robin_Van_Lant=Key.com@groups.io]
Sent: Monday, Oct 22, 2018 5:16 PM EST
To: main@jfw.groups.io
Subject: Office 365 Excel 2016 and Jaws 2018 Issues

I heavily use Excel 2016 in Windows 10 with JAWS 2018. I moved to JAWS
from Window Eyes as the same time I moved to Win 10 and Office 2016, so
I'm not really able to compare JAWS in the two versions of Excel. The
only real issue I have in Excel is a noticeable lag when opening large
files where autofilters are turned on.

As for column width, I use the old Excel 2003 keyboard shortcut that
still works. Hit Alt C (think Column) and then w to open a small edit
box that tells you current width and allows you to change the entry.
Also, Alt C then A will autofit the width.


Robin
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Prewitt
Sent: Tuesday, October 16, 2018 10:34 AM
To: main@jfw.groups.io
Subject: Re: Office 365 Excel 2016 and Jaws 2018 Issues

I do agree that we will have to move to Excel 2016 sooner rather than
later. So, it sounds like they have moved things from the context menu
into the ribbon.
On Oct 16, 2018, at 11:03 AM, Sieghard Weitzel <sieghard@live.ca> wrote:

Well, he will have to learn where to find it or remember the shortcut
keys, column width is Alt+H followed by O and W Also, I believe there
are ways to add things to the context menu with various ttweaks, you'd
have to Google this, but I'm almost certain I read there is a way to add
things to the context menu.
I found it took a bit to get used to Office 2013 and later 2016 which
isn't so different, but it was quite a change from Office 2010, but you
can't stay on 2010 forever so one might as well deal with it.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian
Prewitt
Sent: Tuesday, October 16, 2018 8:50 AM
To: main@jfw.groups.io
Subject: Re: Office 365 Excel 2016 and Jaws 2018 Issues

He uses Excel, Outlook, and Word primarily. The ribbon is in Excel
2010. He reports the column width is no longer in the context menu in
Excel 2016.
On Oct 16, 2018, at 10:41 AM, Sieghard Weitzel <sieghard@live.ca> wrote:

What other applications do you or your employee need to use? If it's
primarily Office then upgrading to Windows 10 is fine, it is very stabil
and Office works well.
I know you mentioned he can't change the width of columns and so on, if
he came from Excel 2010, are you sure he knows how to do it, if I
remember correctly, didn't Excel 2010 still use menus or di dit have
ribbon menus already?
If he has to use older applications and if he uses the Jaws cursor a lot
there is a good chance he will lose that in Windows 10.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian
Prewitt
Sent: Monday, October 15, 2018 7:29 PM
To: main@jfw.groups.io
Subject: Re: Office 365 Excel 2016 and Jaws 2018 Issues

I will attempt an Office repair. As for Windows 10, do others find
better Jaws 2018/Excel 2016(Office 365) stability under Windows 10
rather than Windows 7? Are there any adjustments that I can make in
Jaws or Excel to make them work better under Windows 7?

Thank you,

Brian
On Oct 15, 2018, at 9:17 PM, Brian Prewitt <bprewitt@msblind.org> wrote:

I have reported it. They tell me to do an Office repair and/or move to
Windows 10.
On Oct 15, 2018, at 9:12 PM, Alyssa <lyssassong@gmail.com> wrote:

Contact FS, and report this. I also have issues with JAWS 2018 and
Office 365. Mine are with Word. I cannot properly read information in
tables, so I can see how this would transfer over to Excel.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian
Prewitt
Sent: Monday, October 15, 2018 10:05 PM
To: jfw@groups.io
Subject: Office 365 Excel 2016 and Jaws 2018 Issues

Hi List,

One of my executives is having quite a few issues with Jaws 2018 and
Office 365 Excel 2016, the latest build of both under Windows 7. So
much so that I have installed excel 2010 on his computer in order for
him to get work done. He is reporting the following issues. Jaws
becomes silent when saving files, formulas aren’t read to him, he will
lose an hour of work randomly, he can’t widen columns, add new sheets,
rename sheets, etc. All of these things and others I may not have
mentioned he can do in Excel 2010. Any suggestions are greatly appreciated.

Regards,

Brian



























This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you
are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information. If
you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether electronic
or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or
redisclose such information for any purpose other than to provide the
services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or
services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional
E-mails' in the
SUBJECT line.


Re: Office 365 Excel 2016 and Jaws 2018 Issues

Van Lant, Robin
 

I heavily use Excel 2016 in Windows 10 with JAWS 2018. I moved to JAWS from Window Eyes as the same time I moved to Win 10 and Office 2016, so I'm not really able to compare JAWS in the two versions of Excel. The only real issue I have in Excel is a noticeable lag when opening large files where autofilters are turned on.

As for column width, I use the old Excel 2003 keyboard shortcut that still works. Hit Alt C (think Column) and then w to open a small edit box that tells you current width and allows you to change the entry. Also, Alt C then A will autofit the width.


Robin

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Prewitt
Sent: Tuesday, October 16, 2018 10:34 AM
To: main@jfw.groups.io
Subject: Re: Office 365 Excel 2016 and Jaws 2018 Issues

I do agree that we will have to move to Excel 2016 sooner rather than later. So, it sounds like they have moved things from the context menu into the ribbon.
On Oct 16, 2018, at 11:03 AM, Sieghard Weitzel <sieghard@live.ca> wrote:

Well, he will have to learn where to find it or remember the shortcut
keys, column width is Alt+H followed by O and W Also, I believe there are ways to add things to the context menu with various ttweaks, you'd have to Google this, but I'm almost certain I read there is a way to add things to the context menu.
I found it took a bit to get used to Office 2013 and later 2016 which isn't so different, but it was quite a change from Office 2010, but you can't stay on 2010 forever so one might as well deal with it.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian
Prewitt
Sent: Tuesday, October 16, 2018 8:50 AM
To: main@jfw.groups.io
Subject: Re: Office 365 Excel 2016 and Jaws 2018 Issues

He uses Excel, Outlook, and Word primarily. The ribbon is in Excel 2010. He reports the column width is no longer in the context menu in Excel 2016.
On Oct 16, 2018, at 10:41 AM, Sieghard Weitzel <sieghard@live.ca> wrote:

What other applications do you or your employee need to use? If it's primarily Office then upgrading to Windows 10 is fine, it is very stabil and Office works well.
I know you mentioned he can't change the width of columns and so on, if he came from Excel 2010, are you sure he knows how to do it, if I remember correctly, didn't Excel 2010 still use menus or di dit have ribbon menus already?
If he has to use older applications and if he uses the Jaws cursor a lot there is a good chance he will lose that in Windows 10.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian
Prewitt
Sent: Monday, October 15, 2018 7:29 PM
To: main@jfw.groups.io
Subject: Re: Office 365 Excel 2016 and Jaws 2018 Issues

I will attempt an Office repair. As for Windows 10, do others find better Jaws 2018/Excel 2016(Office 365) stability under Windows 10 rather than Windows 7? Are there any adjustments that I can make in Jaws or Excel to make them work better under Windows 7?

Thank you,

Brian
On Oct 15, 2018, at 9:17 PM, Brian Prewitt <bprewitt@msblind.org> wrote:

I have reported it. They tell me to do an Office repair and/or move to Windows 10.
On Oct 15, 2018, at 9:12 PM, Alyssa <lyssassong@gmail.com> wrote:

Contact FS, and report this. I also have issues with JAWS 2018 and Office 365. Mine are with Word. I cannot properly read information in tables, so I can see how this would transfer over to Excel.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian
Prewitt
Sent: Monday, October 15, 2018 10:05 PM
To: jfw@groups.io
Subject: Office 365 Excel 2016 and Jaws 2018 Issues

Hi List,

One of my executives is having quite a few issues with Jaws 2018 and Office 365 Excel 2016, the latest build of both under Windows 7. So much so that I have installed excel 2010 on his computer in order for him to get work done. He is reporting the following issues. Jaws becomes silent when saving files, formulas aren’t read to him, he will lose an hour of work randomly, he can’t widen columns, add new sheets, rename sheets, etc. All of these things and others I may not have mentioned he can do in Excel 2010. Any suggestions are greatly appreciated.

Regards,

Brian



















This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional E-mails' in the
SUBJECT line.


Re: Is There a JFW Scripting List?

Jonas Voll
 

Yes send offlist!
Yes, try to copy and paste!

Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dani Pagador
Sent: Monday, October 22, 2018 1:38 PM
To: main@jfw.groups.io
Subject: Re: Is There a JFW Scripting List?

Should I send it to you off-list? Is it a matter of copying it out of the .jss file?

Thanks,
Dani

On 10/22/18, Jonas Voll <jonas.voll@envisionus.com> wrote:
Ok I see this one, can you send your script?


Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration for
the blind and visually impaired through employment, outreach,
rehabilitation, education and research.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dani
Pagador
Sent: Monday, October 22, 2018 1:15 PM
To: main@jfw.groups.io
Subject: Re: Is There a JFW Scripting List?

Jonas, it's the ReadLineNumber script in Exercise 6.2.
Thanks, Brian. I'll look at Freelists.

On 10/22/18, Brian Vogel <britechguy@gmail.com> wrote:
Dani,

Yes, but not on Groups.io. The only JAWS Scripting
E-mail List I know of can be found here:
https://www.freelists.org/list/jawsscripts
--

Brian *-* Windows 10 Home, 64-Bit, Version 1809, Build 17763

*If you remove all the homosexuals and homosexual influences from
what is generally regarded as American culture, you are pretty much
left with Let's Make a Deal.*

~ Fran Lebowitz






SonicWall identified this message as clean.
To manage your junk mail go to https://nospam.envisionus.com and logon
with your domain userid and password.
If you consider this email to be spam please forward it to
'spam@nospam.envisionus.com'
NOTICE: This electronic mail message and any attached files are
confidential. The information is exclusively for the use of the
individual or entity intended as the recipient. If you are not the
intended recipient, any use, copying, printing, reviewing, retention,
disclosure, distribution or forwarding of the message or any attached
file is not authorized and is strictly prohibited. If you have
received this electronic mail message in error, please advise the
sender by reply electronic mail immediately and permanently delete the
original transmission, any attachments and any copies of this message from your computer system.





NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.


Re: Is There a JFW Scripting List?

Dani Pagador
 

Should I send it to you off-list? Is it a matter of copying it out of
the .jss file?

Thanks,
Dani

On 10/22/18, Jonas Voll <jonas.voll@envisionus.com> wrote:
Ok I see this one, can you send your script?


Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration for the
blind and visually impaired through employment, outreach, rehabilitation,
education and research.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dani Pagador
Sent: Monday, October 22, 2018 1:15 PM
To: main@jfw.groups.io
Subject: Re: Is There a JFW Scripting List?

Jonas, it's the ReadLineNumber script in Exercise 6.2.
Thanks, Brian. I'll look at Freelists.

On 10/22/18, Brian Vogel <britechguy@gmail.com> wrote:
Dani,

Yes, but not on Groups.io. The only JAWS Scripting
E-mail List I know of can be found here:
https://www.freelists.org/list/jawsscripts
--

Brian *-* Windows 10 Home, 64-Bit, Version 1809, Build 17763

*If you remove all the homosexuals and homosexual influences from
what is generally regarded as American culture, you are pretty much
left with Let's Make a Deal.*

~ Fran Lebowitz






SonicWall identified this message as clean.
To manage your junk mail go to https://nospam.envisionus.com and logon with
your domain userid and password.
If you consider this email to be spam please forward it to
'spam@nospam.envisionus.com'
NOTICE: This electronic mail message and any attached files are
confidential. The information is exclusively for the use of the individual
or entity intended as the recipient. If you are not the intended recipient,
any use, copying, printing, reviewing, retention, disclosure, distribution
or forwarding of the message or any attached file is not authorized and is
strictly prohibited. If you have received this electronic mail message in
error, please advise the sender by reply electronic mail immediately and
permanently delete the original transmission, any attachments and any copies
of this message from your computer system.




Re: stopping chrome speaking remaining download time

paul lemm
 

Hi Brian,

 

That’s really helpful, I didn’t realise that’s why it was happening, I’m  going to go add that extension now.  Thanks for the  reply.

 

Paul

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Clark via Groups.Io
Sent: 22 October 2018 17:56
To: main@jfw.groups.io
Subject: Re: stopping chrome speaking remaining download time

 

There is a Google chrome extension called  disable download bar that seems to do the trick. With one of the recent builds of chrome there is a visual bar at the bottom that stays active when doing downloads and it shows the progress bar and that’s what JAWS  is reading. Fortunately, I had the assistance of my sighted   wife who told me about this feature and we discovered this extension which removes that download bar and stops jaws from giving progress announcements when you are downloading.


On Oct 11, 2018, at 12:27 PM, paul lemm <paul.lemm@...> wrote:

Hi,

 

Thanks Bill, I’ll see if I can use a similar technique in chrome to stop the download  progress being spoken. Its handy to know for IE though, since occasionally I do get it in IE too where it speaks download progress, but its not all the time, next time it does though I’ll try your trick. Thanks again.

 

Paul

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: 11 October 2018 16:36
To: main@jfw.groups.io
Subject: Re: stopping chrome speaking remaining download time

 

Hi, Paul. I don’t use chrome. Even with Internet Explorer, there have been times where I have gotten download percentages. I don’t know if Chrome works this way, but the way I stopped download percentages in IE is to press ALT plus N for the info bar, then cycle through the options with Tab. Once I do that, I stop hearing the progress.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of paul lemm
Sent: Thursday, October 11, 2018 3:52 AM
To: main@jfw.groups.io
Subject: Re: stopping chrome speaking remaining download time

 

Morning Bill,

 

Thanks for the suggestion, unfortunately I still need to use jaws in other programs whilst its downloading, so turning off the speech isn’t really an option for  me. thanks for the suggestion though, I think I’ll just have to revert to downloading  really big files through IE, since that doesn’t give me the progress updates. Its not a big deal to  have to do it this way, I  just thought I’d ask in case there was a way of shutting it off in chrome.

 

Paul

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: 10 October 2018 22:51
To: main@jfw.groups.io
Subject: Re: stopping chrome speaking remaining download time

 

Hi, Paul. I think the only way to stop the announcements is to turn off JAWS speech with INSERT plus SPACE, followed by S.

 

For this to work, you must go into your default configuration file for JAWS, and turn Less Speech options from Speech On Demand to Mute Speech.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of paul lemm
Sent: Wednesday, October 10, 2018 2:37 PM
To: main@jfw.groups.io
Subject: Re: stopping chrome speaking remaining download time

 

Hi,

 

I tried the jaws quick settings for chrome with jaws key and V,  I managed to find the  progress bar  option, I’ve changed it to silent , but I’m still getting the ‘alert downloading, 2 hours left’ message. Thanks for the idea none the less, any other suggestions that might stop the announcements?

 

Paul

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: 10 October 2018 21:39
To: main@jfw.groups.io
Subject: Re: stopping chrome speaking remaining download time

 

When in Chrome, do Insert V to open the JAWS settings for Chrome. Near the bottom of the tree view, you’ll find the progress bar verbosity settings.   You can either turn them off or I think you can change how often they let you know of the progress.

 

 

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of paul lemm
Sent: Wednesday, October 10, 2018 1:40 PM
To: main@jfw.groups.io
Subject: stopping chrome speaking remaining download time

 

hi,

 

wondering if anyone can help, I use chrome  as my main web browser , but when I download files  every minute                 or there about jaws updates me on the download progress, this isn’t a problem for small files, but if I want to download something that will take an hour or two constantly getting the download update gets a little annoying.  Is there any setting I can alter to stop jaws constantly reading the download progress?

 

Paul

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.