Date   

Re: 1809 and creating restore point

Mike B. <mike9902@...>
 

Hi Again Bob,
 
Those checkboxes you speak of, might be radio buttons, so try to up or down arrow on one of them to see if you get another option.
 
Before I go to bed here's a set of steps to try to see if they help:
From: Carlos
To enable System Restore do the following.
 
1. Press Windows key+R to open the "Run" dialog.
 
2. Type, SystemPropertiesProtection, followed by Enter.
 
3. When the "System Properties" dialog opens, make sure that the
"System Protection" tab is selected.
 
4. Tab until you find the list and select your system drive.
 
5. If it says
"On",
then System Restore is already enabled.  If it says
"Off",
tab to the
"Configure"
button and select it.
 
6. Select the
"Turn on system protection"
radio button.
 
7. Use the
"Max Usage"
slider to select how much drive space you want to be used for restore
points.  I would recommend at least 5 to 10 percent, but if you have a large
drive then you can set it higher if you prefer.
 
8. Select the
"OK"
button twice to close the
"System Protection"
and
"System Properties"
dialogs respectively.
Carlo
Take care.  Mike.  Go Dodgers!
Sent from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----
From: Onwardbob
Sent: Wednesday, October 03, 2018 8:36 PM
Subject: 1809 and creating restore point

Don't know what I'm doing wrong but I can't create a restore point. Using
J-2018 and W-1809 I can get in to the create restore point but it shows
recovery off and I can't uncheck this. In configure, disable system
protection is also checked and I can't uncheck it either. Can someone give
me step by step instructions? Thank, this one has me feeling dumb...s

BOB SOUTAR.ONWARD THRU THE FOG







Re: 1809 and creating restore point

Sieghard Weitzel <sieghard@...>
 

These are not checkboxes but radio buttons, if you activate the "Configure" button you have to up arrow if you want to turn it on

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Onwardbob
Sent: Wednesday, October 3, 2018 8:36 PM
To: main@jfw.groups.io
Subject: 1809 and creating restore point

Don't know what I'm doing wrong but I can't create a restore point. Using
J-2018 and W-1809 I can get in to the create restore point but it shows recovery off and I can't uncheck this. In configure, disable system protection is also checked and I can't uncheck it either. Can someone give me step by step instructions? Thank, this one has me feeling dumb...s

BOB SOUTAR.ONWARD THRU THE FOG


Re: JAWS Version 2018.1808.10, Windows 1809 and calculator

Sieghard Weitzel <sieghard@...>
 

It’s broken in 1803 as well

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Wednesday, October 3, 2018 5:13 PM
To: JFW Mailing List <main@jfw.groups.io>
Subject: JAWS Version 2018.1808.10, Windows 1809 and calculator

 

I just discovered that the calculator is broken again in JAWS Version 2018.1808.10, running Windows 10, Version 1809 (OS Build 17763.1). I called Vispero and Bill, the tech was able to duplicate the problem.

 

Bill White

 

billwhite92701@...

 


Re: 1809 and creating restore point

Mike B. <mike9902@...>
 

Hi Bob,
 
I'm not sure if this makes a difference but, are you running the Pro or Home version of Win10?
Take care.  Mike.  Go Dodgers!
Sent from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----
From: Onwardbob
Sent: Wednesday, October 03, 2018 8:36 PM
Subject: 1809 and creating restore point

Don't know what I'm doing wrong but I can't create a restore point. Using
J-2018 and W-1809 I can get in to the create restore point but it shows
recovery off and I can't uncheck this. In configure, disable system
protection is also checked and I can't uncheck it either. Can someone give
me step by step instructions? Thank, this one has me feeling dumb...s

BOB SOUTAR.ONWARD THRU THE FOG







Re: Making JAWS announce shortcut sequences

Bill White <billwhite92701@...>
 

Hi, Brian. Another thing you can do, if the client is using JAWS 2018, is to use INSERT plus SPACE, followed by Z to put JAWS into Alternate User Directory Mode. This keeps any settings files from taking effect. JAWS runs in default mode at this point. So, if shortcut key sequences are announced in this mode, you will know that it is a setting in JAWS which has been personalized by the user, which is blocking the key sequence announcements when JAWS has been toggled back to the regular mode.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Brian Vogel
Sent: Wednesday, October 3, 2018 8:50 PM
To: main@jfw.groups.io
Subject: Re: Making JAWS announce shortcut sequences

 

Bill,

           Thanks.   I see another JAWS 2018 user tomorrow and I will be curious to see if her default settings are the same as my other client and will try this.

--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

    A great deal of intelligence can be invested in ignorance when the need for illusion is deep.

          ~ Saul Bellow, To Jerusalem and Back


Re: fema alert today. you need to know.

Sieghard Weitzel <sieghard@...>
 

Nothing wrong with not knowing, if it's a real alert or emergency you don't know about it either and I'm sure the alert message made it clear that this was a test or trial or whatever.
I just hope for all of you south of the 49th that Trump is not going to use this the same way as he uses his Twitter account *smile*

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of netbat66
Sent: Wednesday, October 3, 2018 10:34 AM
To: main@jfw.groups.io
Subject: Re: fema alert today. you need to know.

sorry, this is for the u s.
i didn't think about people that do not live in the u s.
i would not of known about this if i wasn't checking todays weather report on
the radio.
but yes i did mean to list this here.


-----Original Message-----
From: JM Casey
Sent: Wednesday, October 03, 2018 9:42 AM
To: main@jfw.groups.io
Subject: Re: fema alert today. you need to know.

Did you mean to post this to the JAWS list?
I don't know how many uS residents are here, but certainly not everyone on
the list is one of those and this isn't even Windows-related.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of netbat66
Sent: October 3, 2018 12:28 PM
To: jaws <main@jfw.groups.io>
Subject: fema alert today. you need to know.

sorry, but i thought if i only sent a link you would think this is spam.
i wanted everyone to know about this fema alert all cell phone users are
going to get today at 11:20 california time.

https://techcrunch.com/2018/10/03/fema-is-about-to-send-a-presidential-alert
-to-millions-of-u-s-phones/
FEMA is about to send a 'Presidential Alert' to millions of U.S. phones Zack
Whittaker@zackwhittaker / 2 hours ago fema-hero

In a few hours, millions of Americans will get a test emergency

"Presidential Alert" message sent to their phone - a simulation in case

the president ever needs to reach to entire country in a national

emergency.

At 2:18pm ET, the Federal Emergency Management Agency will send a

short alert, saying: "THIS IS A TEST of the National Wireless Emergency

Alert System. No action is needed." A few minutes later, televisions and

radio broadcasts will briefly suspend and a similar message will run.

The test was originally scheduled for mid-September but was delayed

until Wednesday after Hurricane Florence hit the east coast.

This will be the first time the government has conducted a nationwide

test of the Wireless Emergency Alert (WEA) system, according to a FEMA

advisory.

Emergency warnings used to be confined to television and radio

broadcasts, sounding out that familiar terrifying high-pitch tone. But as

consumers moved away from televisions and radio to mobile devices

that are always with us, the government began working on a system to

get emergency alerts in our hands.

Since it was devised in 2006 under the Bush administration, the Wireless

Emergency Alert (WEA) has slowly rolled out across the U.S. to form a

new state-of-the-art emergency alert system. Like the legacy system, the

WEA is designed to alert Americans to bad weather and missing children

at a local level directly to your phone.

But now FEMA wants to test a third alert - the presidential alert - which

will send a message to every switched-on phone with cell service across

the U.S. at the same time.

This won't be a text message sent to your phone, experts say. Instead of

sending text messages that would flood the networks, the alerts are sent

directly over the cellular network.

Although today is a test, any future presidential alert can be sent solely

at the discretion of the president and can be issued for any reason. And,

unlike other alerts, Americans cannot opt-out of receiving a presidential

alert.

Some have expressed concern that the system could be abused for

political reasons. Others worry that the system could be hacked.

Tom Crane, an expert in emergency management at Everbridge, a critical

communications provider, told TechCrunch that the WEA has "extra

safeguards" in place before sending an alert. An authorized user has to

enter a complex password that has two elements - a private key and a

keystore password - which are unique for each alerting authority.

"It's not as easy as 'someone left their computer unattended so i'm going

to send a Wireless Emergency Alert'," he said.

The emergency alert system is far from perfect. Earlier this year, panic

spread on Hawaii after an erroneous alert warned residents of a "ballistic

missile threat inbound." The message said, "this is not a drill." The false

warning was amid the height of tensions between the US and North9:20 AM

Korea, which at the time was regularly test-firing rockets used for its

nuclear missile program.


Re: Making JAWS announce shortcut sequences

Cristóbal
 

Yup.

 

Cristóbal

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Wednesday, October 3, 2018 8:51 PM
To: main@jfw.groups.io
Subject: Re: Making JAWS announce shortcut sequences

 

Hi, Brian. I’m using JAWS 2018, latest update, and all my controls are still announced with shortcut sequences. It sounds as if JAWS on the system you are using has been customized in some way, and the personal settings are blocking announcement of these key sequences.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Brian Vogel
Sent: Wednesday, October 3, 2018 8:24 PM
To: main@jfw.groups.io
Subject: Re: Making JAWS announce shortcut sequences

 

Update:  Sadly, tweaking the access keys settings to all didn't change a thing.

I know darned well that at one time when you traversed the ribbon the "end of shortcut" sequence for the control on which you've landed was announced.  I rely on that as far as a student's ability to keep adding to their own "greatest hits" list as they find controls they use all the time.  It doesn't help to know if, for instance, in Microsoft Word that the font is in the Home Ribbon, Font Group, and that you can get to it "the long way" each time rather than knowing that if you hit ALT+H,FF will instantly take you there.  I need that FF to somehow be announced when you land on that control, and NVDA still does it by default.  I know JAWS can, too.

--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

    A great deal of intelligence can be invested in ignorance when the need for illusion is deep.

          ~ Saul Bellow, To Jerusalem and Back


Re: Making JAWS announce shortcut sequences

Bill White <billwhite92701@...>
 

Hi, Brian. I’m using JAWS 2018, latest update, and all my controls are still announced with shortcut sequences. It sounds as if JAWS on the system you are using has been customized in some way, and the personal settings are blocking announcement of these key sequences.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Brian Vogel
Sent: Wednesday, October 3, 2018 8:24 PM
To: main@jfw.groups.io
Subject: Re: Making JAWS announce shortcut sequences

 

Update:  Sadly, tweaking the access keys settings to all didn't change a thing.

I know darned well that at one time when you traversed the ribbon the "end of shortcut" sequence for the control on which you've landed was announced.  I rely on that as far as a student's ability to keep adding to their own "greatest hits" list as they find controls they use all the time.  It doesn't help to know if, for instance, in Microsoft Word that the font is in the Home Ribbon, Font Group, and that you can get to it "the long way" each time rather than knowing that if you hit ALT+H,FF will instantly take you there.  I need that FF to somehow be announced when you land on that control, and NVDA still does it by default.  I know JAWS can, too.

--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

    A great deal of intelligence can be invested in ignorance when the need for illusion is deep.

          ~ Saul Bellow, To Jerusalem and Back


Re: Making JAWS announce shortcut sequences

 

Bill,

           Thanks.   I see another JAWS 2018 user tomorrow and I will be curious to see if her default settings are the same as my other client and will try this.

--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

    A great deal of intelligence can be invested in ignorance when the need for illusion is deep.

          ~ Saul Bellow, To Jerusalem and Back


Re: Making JAWS announce shortcut sequences

Bill White <billwhite92701@...>
 

Hi, Brian. It might not have to do with Access keys. It might have to do with the level of verbocity in JAWS. Try it with the following checked:

 

Tutor Messages Announce Menu and Control Help radio button checked

 

This setting is in Basic Settings in JAWS.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Brian Vogel
Sent: Wednesday, October 3, 2018 8:24 PM
To: main@jfw.groups.io
Subject: Re: Making JAWS announce shortcut sequences

 

Update:  Sadly, tweaking the access keys settings to all didn't change a thing.

I know darned well that at one time when you traversed the ribbon the "end of shortcut" sequence for the control on which you've landed was announced.  I rely on that as far as a student's ability to keep adding to their own "greatest hits" list as they find controls they use all the time.  It doesn't help to know if, for instance, in Microsoft Word that the font is in the Home Ribbon, Font Group, and that you can get to it "the long way" each time rather than knowing that if you hit ALT+H,FF will instantly take you there.  I need that FF to somehow be announced when you land on that control, and NVDA still does it by default.  I know JAWS can, too.

--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

    A great deal of intelligence can be invested in ignorance when the need for illusion is deep.

          ~ Saul Bellow, To Jerusalem and Back


1809 and creating restore point

Onwardbob
 

Don't know what I'm doing wrong but I can't create a restore point. Using
J-2018 and W-1809 I can get in to the create restore point but it shows
recovery off and I can't uncheck this. In configure, disable system
protection is also checked and I can't uncheck it either. Can someone give
me step by step instructions? Thank, this one has me feeling dumb...s

BOB SOUTAR.ONWARD THRU THE FOG


Re: Making JAWS announce shortcut sequences

 

Update:  Sadly, tweaking the access keys settings to all didn't change a thing.

I know darned well that at one time when you traversed the ribbon the "end of shortcut" sequence for the control on which you've landed was announced.  I rely on that as far as a student's ability to keep adding to their own "greatest hits" list as they find controls they use all the time.  It doesn't help to know if, for instance, in Microsoft Word that the font is in the Home Ribbon, Font Group, and that you can get to it "the long way" each time rather than knowing that if you hit ALT+H,FF will instantly take you there.  I need that FF to somehow be announced when you land on that control, and NVDA still does it by default.  I know JAWS can, too.

--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

    A great deal of intelligence can be invested in ignorance when the need for illusion is deep.

          ~ Saul Bellow, To Jerusalem and Back


Re: JAWS Version 2018.1808.10, Windows 1809 and calculator

Onwardbob
 

Yup it's busted; but, it works just fine with NVDA.

BOB SOUTAR.ONWARD THRU THE FOG

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Bill White
Sent: Wednesday, October 03, 2018 5:13 PM
To: JFW Mailing List
Subject: JAWS Version 2018.1808.10, Windows 1809 and calculator

I just discovered that the calculator is broken again in JAWS Version
2018.1808.10, running Windows 10, Version 1809 (OS Build 17763.1). I called
Vispero and Bill, the tech was able to duplicate the problem.

Bill White

billwhite92701@dslextreme.com


Re: Jaws 2018 and Win 10 1809

Shirley Tracy
 

I never realized it before, because I generally go directly to my Gmail to fill in text boxes such as signature. It carries through to Windows Mail and isn’t a problem for me. But I do realize another annoying challenge: Some links will not open in Windows Mail, and I have to go into Gmail to open them. Do any of you have this problem?

 

Also, have any of you had the experience where you open a message in mail and JAWS shows it as a blank page? When I unload JAWS and start it again,. The message is right there. It doesn’t happen every time.

 

 

 

Shirley Tracy

 

From: Melissa Stott
Sent: Wednesday, October 3, 2018 8:39 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2018 and Win 10 1809

 

I too have noticed that.  It used to be though.

 

                Melissa

 

From: David Moore
Sent: Wednesday, October 3, 2018 5:57 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2018 and Win 10 1809

 

Hi all!

The signature field is still not accessible, in the Mail app  with any screen reader in Windows 10 1809!

In credible they have not fixed this LOL!

David Moore

 

Sent from Mail for Windows 10

 

From: inamuddin khan
Sent: Wednesday, October 3, 2018 5:10 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2018 and Win 10 1809

 

What about edit field in setting/signature in windows 10 mail app in windows 10 version 1809 with any screen reader?

I have checked it and no screen reader including narrator is working in edit field of signature!

Please check and report back to Microsoft!

Also report here as well!

With regards from Inamuddin with the Skkype ID:

Charlsdarwin1

 

 

Sent from Mail for Windows 10

 

From: David Moore
Sent: Wednesday, October 3, 2018 12:58 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2018 and Win 10 1809

 

Hi all!

I am a Windows 10 insider, and I love Windows 10 1809 with JAWS 2019!

In the mail app, JAWS 2019 now reads the suggestions as you type an email address into the edit box.

JAWS 2019 is very snappy in the settings app.

You will have to turn off the background apps you do not want to run.

Narrator, is much improved in Edge!

I just used that combination to listen to YouTube videos!

With Narrator, the Twitter app is almost accessible. We are getting close.

The emoji in Windows 10 is very accessible with Narrator!

JAWS2019, reads progress bars in downloads in Chrome much better in Windows 10 1809.

Chrome works much better with JAWS, over all, in Windows 10 1809.

You will just love it!

David Moore

 

Sent from Mail for Windows 10

 

From: Don H
Sent: Tuesday, October 2, 2018 8:06 PM
To: main@jfw.groups.io
Subject: Jaws 2018 and Win 10 1809

 

My computer has updated itself to Win 10 1809.  After the upgrade was

complete I got a error message stating that fsatproxy.exe could not be

started.  I closed the dialog box stating this by hitting on the OK

button.  I then rebooted the computer and this message did not come up

again.  Jaws 2018 seems to be running ok.

 

 

 

 

 

 

 

 


Re: Jaws 2018 and Win 10 1809

Melissa Stott <mstott69@...>
 

I too have noticed that.  It used to be though.

 

                Melissa

 

From: David Moore
Sent: Wednesday, October 3, 2018 5:57 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2018 and Win 10 1809

 

Hi all!

The signature field is still not accessible, in the Mail app  with any screen reader in Windows 10 1809!

In credible they have not fixed this LOL!

David Moore

 

Sent from Mail for Windows 10

 

From: inamuddin khan
Sent: Wednesday, October 3, 2018 5:10 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2018 and Win 10 1809

 

What about edit field in setting/signature in windows 10 mail app in windows 10 version 1809 with any screen reader?

I have checked it and no screen reader including narrator is working in edit field of signature!

Please check and report back to Microsoft!

Also report here as well!

With regards from Inamuddin with the Skkype ID:

Charlsdarwin1

 

 

Sent from Mail for Windows 10

 

From: David Moore
Sent: Wednesday, October 3, 2018 12:58 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2018 and Win 10 1809

 

Hi all!

I am a Windows 10 insider, and I love Windows 10 1809 with JAWS 2019!

In the mail app, JAWS 2019 now reads the suggestions as you type an email address into the edit box.

JAWS 2019 is very snappy in the settings app.

You will have to turn off the background apps you do not want to run.

Narrator, is much improved in Edge!

I just used that combination to listen to YouTube videos!

With Narrator, the Twitter app is almost accessible. We are getting close.

The emoji in Windows 10 is very accessible with Narrator!

JAWS2019, reads progress bars in downloads in Chrome much better in Windows 10 1809.

Chrome works much better with JAWS, over all, in Windows 10 1809.

You will just love it!

David Moore

 

Sent from Mail for Windows 10

 

From: Don H
Sent: Tuesday, October 2, 2018 8:06 PM
To: main@jfw.groups.io
Subject: Jaws 2018 and Win 10 1809

 

My computer has updated itself to Win 10 1809.  After the upgrade was

complete I got a error message stating that fsatproxy.exe could not be

started.  I closed the dialog box stating this by hitting on the OK

button.  I then rebooted the computer and this message did not come up

again.  Jaws 2018 seems to be running ok.

 

 

 

 

 

 

 


JAWS Version 2018.1808.10, Windows 1809 and calculator

Bill White <billwhite92701@...>
 

I just discovered that the calculator is broken again in JAWS Version 2018.1808.10, running Windows 10, Version 1809 (OS Build 17763.1). I called Vispero and Bill, the tech was able to duplicate the problem.

 

Bill White

 

billwhite92701@...

 


Re: Jaws 2018 and Win 10 1809

Melissa Stott <mstott69@...>
 

Thanks for this info!

 

                Melissa

 

From: David Moore
Sent: Wednesday, October 3, 2018 3:58 AM
To: main@jfw.groups.io
Subject: Re: Jaws 2018 and Win 10 1809

 

Hi all!

I am a Windows 10 insider, and I love Windows 10 1809 with JAWS 2019!

In the mail app, JAWS 2019 now reads the suggestions as you type an email address into the edit box.

JAWS 2019 is very snappy in the settings app.

You will have to turn off the background apps you do not want to run.

Narrator, is much improved in Edge!

I just used that combination to listen to YouTube videos!

With Narrator, the Twitter app is almost accessible. We are getting close.

The emoji in Windows 10 is very accessible with Narrator!

JAWS2019, reads progress bars in downloads in Chrome much better in Windows 10 1809.

Chrome works much better with JAWS, over all, in Windows 10 1809.

You will just love it!

David Moore

 

Sent from Mail for Windows 10

 

From: Don H
Sent: Tuesday, October 2, 2018 8:06 PM
To: main@jfw.groups.io
Subject: Jaws 2018 and Win 10 1809

 

My computer has updated itself to Win 10 1809.  After the upgrade was

complete I got a error message stating that fsatproxy.exe could not be

started.  I closed the dialog box stating this by hitting on the OK

button.  I then rebooted the computer and this message did not come up

again.  Jaws 2018 seems to be running ok.

 

 

 

 

 


Re: NewW10 update

Bill White <billwhite92701@...>
 

Hi, Morey. One thing which could have happened is that the updates failed to install. One thing you can do is to go to your "update history" in the Settings app, under Update and Security. Press ENTER on the
View Update History link.

Once it opens, press JAWS key plus ALT plus W, and review the results. This is where you can find out if all the updates which tried to install were successful.

Bill White

billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Morey Worthington
Sent: Wednesday, October 3, 2018 4:44 PM
To: jfw@groups.io
Subject: NewW10 update

Hi all. This morning my computer did a W10 update and it said something
about 1809.

Then it did a install and re-started the computer, a desktop. After the
restart, I did a W/R and typed in.."winver" and it came up showing it as
1803 ????

What might have happened, or do you think I should do a shut down and
restart and see which version shows up?

Thanks,

Morey Worthington


NewW10 update

Morey Worthington
 

Hi all. This morning my computer did a W10 update and it said something about 1809.

Then it did a install and re-started the computer, a desktop. After the restart, I did a W/R and typed in.."winver" and it came up showing it as 1803 ????

What might have happened, or do you think I should do a shut down and restart and see which version shows up?

Thanks,

Morey Worthington


Re: Jaws 2018 and Win 10 1809

David Moore
 

Hi all!

The signature field is still not accessible, in the Mail app  with any screen reader in Windows 10 1809!

In credible they have not fixed this LOL!

David Moore

 

Sent from Mail for Windows 10

 

From: inamuddin khan
Sent: Wednesday, October 3, 2018 5:10 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2018 and Win 10 1809

 

What about edit field in setting/signature in windows 10 mail app in windows 10 version 1809 with any screen reader?

I have checked it and no screen reader including narrator is working in edit field of signature!

Please check and report back to Microsoft!

Also report here as well!

With regards from Inamuddin with the Skkype ID:

Charlsdarwin1

 

 

Sent from Mail for Windows 10

 

From: David Moore
Sent: Wednesday, October 3, 2018 12:58 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2018 and Win 10 1809

 

Hi all!

I am a Windows 10 insider, and I love Windows 10 1809 with JAWS 2019!

In the mail app, JAWS 2019 now reads the suggestions as you type an email address into the edit box.

JAWS 2019 is very snappy in the settings app.

You will have to turn off the background apps you do not want to run.

Narrator, is much improved in Edge!

I just used that combination to listen to YouTube videos!

With Narrator, the Twitter app is almost accessible. We are getting close.

The emoji in Windows 10 is very accessible with Narrator!

JAWS2019, reads progress bars in downloads in Chrome much better in Windows 10 1809.

Chrome works much better with JAWS, over all, in Windows 10 1809.

You will just love it!

David Moore

 

Sent from Mail for Windows 10

 

From: Don H
Sent: Tuesday, October 2, 2018 8:06 PM
To: main@jfw.groups.io
Subject: Jaws 2018 and Win 10 1809

 

My computer has updated itself to Win 10 1809.  After the upgrade was

complete I got a error message stating that fsatproxy.exe could not be

started.  I closed the dialog box stating this by hitting on the OK

button.  I then rebooted the computer and this message did not come up

again.  Jaws 2018 seems to be running ok.