It does for me using Office 2016 via Office 365, here is the Jaws Speech History for a say line on your message:

Steve Nutt

Jaws command read Outlook message number

Mon 9/3/2018 1:59 AM

70 KB

23 of 23

Regards,

Sieghard

In outlook 2016, Say Line works, but doesn’t give you the number of messages or the number of the message you’re on.

All the best

Steve

This works for Outlook 13 and so will use this method in future.

Cheers

Tom

In Ourtlook for me it does almost the same, a say line also speaks the number of the message I am on, just now when I did a say line it read your message, sender, subject etc. and then at the end it said “13 of 15”.

The only difference with Jaws+Tab is that is says “List box” before it starts speaking your name, the subject and all that.

Hi,

JAWS+Tab just does effectively a Say Line for me.

All the best

Steve

Make sure your Window is maximized, I am using OUtlook 2016 and both Jaws Key+Tab and Jaws Key+Page Down work and say what they are supposed to say.

Thanks for your reply Steve.

Under Outlook 2013, all I get when pressing insert numpad page down is Jaws saying something about filter applied.  Pressing insert Tab does give the number of the current message as well as the total number of messages.  Maybe Outlook 13 works differently from version 16.

Tom

Hi,

Try reading the status bar, with JAWS Key+Page Down on the number pad.

All the best

Steve

Hi,

Using: Latest Jaws 2018, W10 Home 64 bit, Outlook 13

Is there a Jaws  command which will read  the current message number and or the total number of messages  being displayed in the Outlook 2013 inbox?

Thanks

Tom

It does for me using Office 2016 via Office 365, here is the Jaws Speech History for a say line on your message:

Steve Nutt

Jaws command read Outlook message number

Mon 9/3/2018 1:59 AM

70 KB

23 of 23

Regards,

Sieghard

In outlook 2016, Say Line works, but doesn’t give you the number of messages or the number of the message you’re on.

All the best

Steve

This works for Outlook 13 and so will use this method in future.

Cheers

Tom

In Ourtlook for me it does almost the same, a say line also speaks the number of the message I am on, just now when I did a say line it read your message, sender, subject etc. and then at the end it said “13 of 15”.

The only difference with Jaws+Tab is that is says “List box” before it starts speaking your name, the subject and all that.

Hi,

JAWS+Tab just does effectively a Say Line for me.

All the best

Steve

Make sure your Window is maximized, I am using OUtlook 2016 and both Jaws Key+Tab and Jaws Key+Page Down work and say what they are supposed to say.

Thanks for your reply Steve.

Under Outlook 2013, all I get when pressing insert numpad page down is Jaws saying something about filter applied.  Pressing insert Tab does give the number of the current message as well as the total number of messages.  Maybe Outlook 13 works differently from version 16.

Tom

Hi,

Try reading the status bar, with JAWS Key+Page Down on the number pad.

All the best

Steve

Hi,

Using: Latest Jaws 2018, W10 Home 64 bit, Outlook 13

Is there a Jaws  command which will read  the current message number and or the total number of messages  being displayed in the Outlook 2013 inbox?

Thanks

Tom

Wow, that’s a major bug for a frequently used feature of Word.

Hi all,

I’ve found another place where JAWS crashes hard in Word.  Remember the mailing labels thing?  Here’s another one.

In Word, press Control+H to get into Find And Replace, then tab to the More button and hit space bar on it.  Now tab around a few times and JAWS will say Generic MSAA Container and crash hard again.

Thank goodnesss for NVDA.

Let’s hope it gets fixed in the next update.

All the best

Steve

--

Computer Room Services

77 Exeter Close

Stevenage

Hertfordshire

SG1 4PW

Tel: +44(0)1438-742286

Mob: +44(0)7956-334938

Fax: +44(0)1438-759589

Email: steve@...

Web: http://www.comproom.co.uk

On Sep 3, 2018, at 8:29 AM, Steve Nutt <steve@comproom.co.uk> wrote:

Hi,

There is usually a 30 day trial, at least in the UK there is, then it
costs me £30.00 per month, but that includes Payroll as well, which I can use.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Paul Hunt
Sent: 03 September 2018 13:36
To: main@jfw.groups.io
Subject: Re: JAWS and Quickbooks

Hello Steve. How much does the online version cost? Is there a trial
or demo?
Thanks so much.
Paul

On Sep 3, 2018, at 5:11 AM, Steve Nutt <steve@comproom.co.uk> wrote:

Hi,

What accessibility issues are you having with the online version?

I am using it and although not perfect, it is do-able.

If you have any issues, could I please urge you to write to Ted
Drake, the accessibility manager?

His Email address is:-

Ted_Drake@intuit.com

I have given him what he refers to as valuable feedback, and I am
already seeing improvements.

Thanks.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard
Weitzel
Sent: 03 September 2018 06:28
To: main@jfw.groups.io
Subject: Re: JAWS and Quickbooks

Unfortunately these scripts are expensive and work only on the
desktop version. I wish Quickbooks would make their online version
very accessible and efficient to use.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Sunday, September 2, 2018 2:34 PM
To: main@jfw.groups.io
Subject: Re: JAWS and Quickbooks

Paul, check out My Blind Spot:
https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmyb
l
indspo
t.org%2F&amp;data=02%7C01%7C%7Cc52509411dbd4962743508d6111bce76%7C84d
f
9e7fe9
f640afb435aaaaaaaaaaaa%7C1%7C0%7C636715208448626902&amp;sdata=Mv73rqq
P
ar4zs9
Kv2HXHi4aRaua4gypHMMlEKuSTzuY%3D&amp;reserved=0

or you can check out an article from:
An Introduction to Accessible QuickBooks by Intuit and My Blind Spot:
https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
a
fb.org
%2Fafbpress%2Fpub.asp%3FDocID%3Daw150502&amp;data=02%7C01%7C%7Cc52509
4
11dbd4
962743508d6111bce76%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6367
1
520844
8626902&amp;sdata=k3N4KiJ8TXofxcHB%2FFwNwk0UH4V8M6qulRawpfkfwu8%3D&am
p
;reser
ved=0


From: Paul Hunt [mailto:prhunt1@att.net]
Sent: Sunday, Sep 2, 2018 2:50 PM EST
To: main@jfw.groups.io
Subject: JAWS and Quickbooks

Hello everyone. Several years ago, work was done to make Quickbooks
accessible with JAWS. Does anyone have contact information about
accessibility with Quickbooks and JAWS?

Thanks so much.

Paul

In outlook 2016, Say Line works, but doesn’t give you the number of messages or the number of the message you’re on.

All the best

Steve

This works for Outlook 13 and so will use this method in future.

Cheers

Tom

In Ourtlook for me it does almost the same, a say line also speaks the number of the message I am on, just now when I did a say line it read your message, sender, subject etc. and then at the end it said “13 of 15”.

The only difference with Jaws+Tab is that is says “List box” before it starts speaking your name, the subject and all that.

Hi,

JAWS+Tab just does effectively a Say Line for me.

All the best

Steve

Make sure your Window is maximized, I am using OUtlook 2016 and both Jaws Key+Tab and Jaws Key+Page Down work and say what they are supposed to say.

Thanks for your reply Steve.

Under Outlook 2013, all I get when pressing insert numpad page down is Jaws saying something about filter applied.  Pressing insert Tab does give the number of the current message as well as the total number of messages.  Maybe Outlook 13 works differently from version 16.

Tom

Hi,

Try reading the status bar, with JAWS Key+Page Down on the number pad.

All the best

Steve

Hi,

Using: Latest Jaws 2018, W10 Home 64 bit, Outlook 13

Is there a Jaws  command which will read  the current message number and or the total number of messages  being displayed in the Outlook 2013 inbox?

Thanks

Tom

Hi all,

I’ve found another place where JAWS crashes hard in Word.  Remember the mailing labels thing?  Here’s another one.

In Word, press Control+H to get into Find And Replace, then tab to the More button and hit space bar on it.  Now tab around a few times and JAWS will say Generic MSAA Container and crash hard again.

Thank goodnesss for NVDA.

Let’s hope it gets fixed in the next update.

All the best

Steve

--

Computer Room Services

77 Exeter Close

Stevenage

Hertfordshire

SG1 4PW

Tel: +44(0)1438-742286

Mob: +44(0)7956-334938

Fax: +44(0)1438-759589

Email: steve@...

Web: http://www.comproom.co.uk

Hi all,
Have been using Basic HTML view all this while in my Gmail account.
However, at the firm I recently joined, the office id has a Standard view.
Wish to know the key commands as the table and checkbox shortcuts are
not working properly.
Thanking you
Best
Turab

Hi Bill,
Thanks for your revert.
Well, that's precisely my concern. As sighted people don't quite like
the Basic HTML view.
Hence, was wondering of some basic shortcuts to navigate in Standard view.
Best
Turab


On 9/2/18, Bill White <billwhite92701@dslextreme.com> wrote:

Hi, Turab. If you change to Basic View, it will change the view for
everyone
who uses the same login and password, because you are changing the
account
at the Internet Web Page level, not at the level of an email client on
your
own machine.

Bill White

billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of turab
chimthanawala
Sent: Sunday, September 2, 2018 9:20 AM
To: main@jfw.groups.io
Subject: Re: Use of standard view in Gmail

Hi Shankar,
Thanks a lot for your suggestions.
Will follow the steps. I have the following additional concerns.
1. If I change the view in my system, will the view change for others as
well?
2. Are the features in Basic HTML view lesser as compared to Standard
View?
Best
Turab


On 9/2/18, Shankar C <harshalgips@gmail.com> wrote:

Hi, if your office uses gmail for the Communication, do the following.
1. login with the gmail using your credentials.
2. once you login, the screen reader may announce loading gmail….
3. press letter b key.
4. the screen reader should announce load basic html button, now just
activate the button by pressing space or enter key.
5. now you can view your gmail with basic html.


if you want to set this as default view, go to the links list and
press letter s until your screen reader says set as default view, and
activate the link.



On 8/27/18, Brian Vogel <britechguy@gmail.com> wrote:

Do you have the Gmail Keyboard Shortcuts (
https://support.google.com/mail/answer/6594?co=GENIE.Platform%3DDesktop&hl=en
) turned on? They are off by default.
--

Brian *-* Windows 10 Home, 64-Bit, Version 1803, Build 17134

A great deal of intelligence can be invested in ignorance when the
need
for illusion is deep.

~ Saul Bellow, To Jerusalem and Back

--
----------"Life without God is like an unsharpened pencil - it has no
point."
----------
email: harshalgips@gmail.com
msn: harshalgips@hotmail.com
skype: shankar.a
mobile:+919945860671
thanks and regards
shankar

Are you not able to disable it under Device Manager, Mice and other pointing devices?

You can definitely do as Don has mentioned and check the setting that's available in every mouse pad driver I know of to disable it if an external pointing device is plugged in.  There are lots of wireless mice available, even in thrift shops, where all it takes is the nano dongle.

That being said, I have often used the ultra-low tech solution with my clients:  putting a piece of stiff cardboard, such as what's on the back of a notepad, over it, taped down on one edge (usually the left).  This is very effective in blocking mousepad touches while leaving you both the left and right mouse hard buttons, which can be very handy as opposed to the screen reader emulation for same.  In addition, if you have any sighted help with even moderate frequency it's much quicker to flip over that cardboard so they have full mousepad access without having to fiddle with Device Manager.

--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

    A great deal of intelligence can be invested in ignorance when the need for illusion is deep.

          ~ Saul Bellow, To Jerusalem and Back

On Sep 3, 2018, at 8:29 AM, Steve Nutt <steve@comproom.co.uk> wrote:

Hi,

There is usually a 30 day trial, at least in the UK there is, then it
costs me £30.00 per month, but that includes Payroll as well, which I can use.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Paul Hunt
Sent: 03 September 2018 13:36
To: main@jfw.groups.io
Subject: Re: JAWS and Quickbooks

Hello Steve. How much does the online version cost? Is there a trial
or demo?
Thanks so much.
Paul

On Sep 3, 2018, at 5:11 AM, Steve Nutt <steve@comproom.co.uk> wrote:

Hi,

What accessibility issues are you having with the online version?

I am using it and although not perfect, it is do-able.

If you have any issues, could I please urge you to write to Ted
Drake, the accessibility manager?

His Email address is:-

Ted_Drake@intuit.com

I have given him what he refers to as valuable feedback, and I am
already seeing improvements.

Thanks.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard
Weitzel
Sent: 03 September 2018 06:28
To: main@jfw.groups.io
Subject: Re: JAWS and Quickbooks

Unfortunately these scripts are expensive and work only on the
desktop version. I wish Quickbooks would make their online version
very accessible and efficient to use.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Sunday, September 2, 2018 2:34 PM
To: main@jfw.groups.io
Subject: Re: JAWS and Quickbooks

Paul, check out My Blind Spot:
https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmyb
l
indspo
t.org%2F&amp;data=02%7C01%7C%7Cc52509411dbd4962743508d6111bce76%7C84d
f
9e7fe9
f640afb435aaaaaaaaaaaa%7C1%7C0%7C636715208448626902&amp;sdata=Mv73rqq
P
ar4zs9
Kv2HXHi4aRaua4gypHMMlEKuSTzuY%3D&amp;reserved=0

or you can check out an article from:
An Introduction to Accessible QuickBooks by Intuit and My Blind Spot:
https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
a
fb.org
%2Fafbpress%2Fpub.asp%3FDocID%3Daw150502&amp;data=02%7C01%7C%7Cc52509
4
11dbd4
962743508d6111bce76%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6367
1
520844
8626902&amp;sdata=k3N4KiJ8TXofxcHB%2FFwNwk0UH4V8M6qulRawpfkfwu8%3D&am
p
;reser
ved=0


From: Paul Hunt [mailto:prhunt1@att.net]
Sent: Sunday, Sep 2, 2018 2:50 PM EST
To: main@jfw.groups.io
Subject: JAWS and Quickbooks

Hello everyone. Several years ago, work was done to make Quickbooks
accessible with JAWS. Does anyone have contact information about
accessibility with Quickbooks and JAWS?

Thanks so much.

Paul

On Sep 3, 2018, at 8:29 AM, Steve Nutt <steve@comproom.co.uk> wrote:

Hi,

There is usually a 30 day trial, at least in the UK there is, then it costs
me £30.00 per month, but that includes Payroll as well, which I can use.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Paul Hunt
Sent: 03 September 2018 13:36
To: main@jfw.groups.io
Subject: Re: JAWS and Quickbooks

Hello Steve. How much does the online version cost? Is there a trial or
demo?
Thanks so much.
Paul

On Sep 3, 2018, at 5:11 AM, Steve Nutt <steve@comproom.co.uk> wrote:

Hi,

What accessibility issues are you having with the online version?

I am using it and although not perfect, it is do-able.

If you have any issues, could I please urge you to write to Ted Drake,
the accessibility manager?

His Email address is:-

Ted_Drake@intuit.com

I have given him what he refers to as valuable feedback, and I am
already seeing improvements.

Thanks.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard
Weitzel
Sent: 03 September 2018 06:28
To: main@jfw.groups.io
Subject: Re: JAWS and Quickbooks

Unfortunately these scripts are expensive and work only on the desktop
version. I wish Quickbooks would make their online version very
accessible and efficient to use.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Sunday, September 2, 2018 2:34 PM
To: main@jfw.groups.io
Subject: Re: JAWS and Quickbooks

Paul, check out My Blind Spot:
https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmybl
indspo
t.org%2F&amp;data=02%7C01%7C%7Cc52509411dbd4962743508d6111bce76%7C84df
9e7fe9
f640afb435aaaaaaaaaaaa%7C1%7C0%7C636715208448626902&amp;sdata=Mv73rqqP
ar4zs9
Kv2HXHi4aRaua4gypHMMlEKuSTzuY%3D&amp;reserved=0

or you can check out an article from:
An Introduction to Accessible QuickBooks by Intuit and My Blind Spot:
https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.a
fb.org
%2Fafbpress%2Fpub.asp%3FDocID%3Daw150502&amp;data=02%7C01%7C%7Cc525094
11dbd4
962743508d6111bce76%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63671
520844
8626902&amp;sdata=k3N4KiJ8TXofxcHB%2FFwNwk0UH4V8M6qulRawpfkfwu8%3D&amp
;reser
ved=0


From: Paul Hunt [mailto:prhunt1@att.net]
Sent: Sunday, Sep 2, 2018 2:50 PM EST
To: main@jfw.groups.io
Subject: JAWS and Quickbooks

Hello everyone. Several years ago, work was done to make Quickbooks
accessible with JAWS. Does anyone have contact information about
accessibility with Quickbooks and JAWS?

Thanks so much.

Paul

On Sep 3, 2018, at 5:11 AM, Steve Nutt <steve@comproom.co.uk> wrote:

Hi,

What accessibility issues are you having with the online version?

I am using it and although not perfect, it is do-able.

If you have any issues, could I please urge you to write to Ted Drake,
the accessibility manager?

His Email address is:-

Ted_Drake@intuit.com

I have given him what he refers to as valuable feedback, and I am
already seeing improvements.

Thanks.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard
Weitzel
Sent: 03 September 2018 06:28
To: main@jfw.groups.io
Subject: Re: JAWS and Quickbooks

Unfortunately these scripts are expensive and work only on the desktop
version. I wish Quickbooks would make their online version very
accessible and efficient to use.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Sunday, September 2, 2018 2:34 PM
To: main@jfw.groups.io
Subject: Re: JAWS and Quickbooks

Paul, check out My Blind Spot:
https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmybl
indspo
t.org%2F&amp;data=02%7C01%7C%7Cc52509411dbd4962743508d6111bce76%7C84df
9e7fe9
f640afb435aaaaaaaaaaaa%7C1%7C0%7C636715208448626902&amp;sdata=Mv73rqqP
ar4zs9
Kv2HXHi4aRaua4gypHMMlEKuSTzuY%3D&amp;reserved=0

or you can check out an article from:
An Introduction to Accessible QuickBooks by Intuit and My Blind Spot:
https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.a
fb.org
%2Fafbpress%2Fpub.asp%3FDocID%3Daw150502&amp;data=02%7C01%7C%7Cc525094
11dbd4
962743508d6111bce76%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63671
520844
8626902&amp;sdata=k3N4KiJ8TXofxcHB%2FFwNwk0UH4V8M6qulRawpfkfwu8%3D&amp
;reser
ved=0


From: Paul Hunt [mailto:prhunt1@att.net]
Sent: Sunday, Sep 2, 2018 2:50 PM EST
To: main@jfw.groups.io
Subject: JAWS and Quickbooks

Hello everyone. Several years ago, work was done to make Quickbooks
accessible with JAWS. Does anyone have contact information about
accessibility with Quickbooks and JAWS?

Thanks so much.

Paul

On Sep 3, 2018, at 5:11 AM, Steve Nutt <steve@comproom.co.uk> wrote:

Hi,

What accessibility issues are you having with the online version?

I am using it and although not perfect, it is do-able.

If you have any issues, could I please urge you to write to Ted Drake, the
accessibility manager?

His Email address is:-

Ted_Drake@intuit.com

I have given him what he refers to as valuable feedback, and I am already
seeing improvements.

Thanks.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: 03 September 2018 06:28
To: main@jfw.groups.io
Subject: Re: JAWS and Quickbooks

Unfortunately these scripts are expensive and work only on the desktop
version. I wish Quickbooks would make their online version very accessible
and efficient to use.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Sunday, September 2, 2018 2:34 PM
To: main@jfw.groups.io
Subject: Re: JAWS and Quickbooks

Paul, check out My Blind Spot:
https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmyblindspo
t.org%2F&amp;data=02%7C01%7C%7Cc52509411dbd4962743508d6111bce76%7C84df9e7fe9
f640afb435aaaaaaaaaaaa%7C1%7C0%7C636715208448626902&amp;sdata=Mv73rqqPar4zs9
Kv2HXHi4aRaua4gypHMMlEKuSTzuY%3D&amp;reserved=0

or you can check out an article from:
An Introduction to Accessible QuickBooks by Intuit and My Blind Spot:
https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.afb.org
%2Fafbpress%2Fpub.asp%3FDocID%3Daw150502&amp;data=02%7C01%7C%7Cc52509411dbd4
962743508d6111bce76%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63671520844
8626902&amp;sdata=k3N4KiJ8TXofxcHB%2FFwNwk0UH4V8M6qulRawpfkfwu8%3D&amp;reser
ved=0


From: Paul Hunt [mailto:prhunt1@att.net]
Sent: Sunday, Sep 2, 2018 2:50 PM EST
To: main@jfw.groups.io
Subject: JAWS and Quickbooks

Hello everyone. Several years ago, work was done to make Quickbooks
accessible with JAWS. Does anyone have contact information about
accessibility with Quickbooks and JAWS?

Thanks so much.

Paul