Date   
moderated Re: backstage view in Office 2016

 

But the are not exactly the same dialogue as F12/Control+F12.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: Monday, July 2, 2018 10:27 AM
To: main@jfw.groups.io
Subject: Re: backstage view in Office 2016

 

On Fri, Jun 29, 2018 at 07:41 am, Sieghard Weitzel wrote:

much easier to use Control+F12 rather than File > Open.

Just to "complete the circle" you can use CTRL+O for Open just as you can use CTRL+S to Save.  These are both commands of MS-Office programs, and probably a lot more, as hitting CTRL+S here in Chrome also opens the save dialog, but what it wants to save is an HTML file.  CTRL+O also brings up an Open dialog in Chrome.
 
--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

     Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many of our people need it sorely on these accounts. Broad, wholesome, charitable views of men and things cannot be acquired by vegetating in one little corner of the earth all one's lifetime.

         ~ Mark Twain

Re: alt and control key seem to be stuck

Andre Polykanine <andre@...>
 

Hi Kevin,
that is because you used the right Alt, which also is utilized as
AltGR by many languages. Either don't use the right Alt (too often) or
press it several times to get rid of this effect.


--
With best regards from Ukraine,
Andre
Skype: menelion_elensule
Twitter (English only): @AndrePolykanine

------------ Original message ------------
From: kevin meyers <kman2020@...>
To: main@jfw.groups.io
Date created: , 7:08:32 PM
Subject: alt and control key seem to be stuck


Hello,



I’m using windows10 and jaws2018. Suddenly either the alt or control key is stated when pressing enter, any of the arrow keys and so on. If I unload Jaws and reload it goes away. What could be causing this to suddenly occur?



Cheers,





Kevin Meyers

moderated Re: Question about learning foreign languages with JAWS

Andre Polykanine <andre@...>
 

Hello Emil,
I might sound a bit too harsh to everyone (sorry about that), but
if you really want to learn a language (Spanish in your case), please
don't listen to those suggestions like pressing Alt + numpad keys,
using Word keystrokes, and so on, and so forth. They are
completely useless unless you plan to make a couple assignments and
give up with it. I speak quite a number of languages (seven,
to be precise), and I suggest you to do just one thing: add the
Spanish keyboard layout, learn it and switch to it whenever you need
to type in Spanish.
then you'll also need a Spanish TTS (voice) to have correct speech
output. If you use Eloquence or Vocalizer Expressive, basically JAWS
should switch languages automagically, though it doesn't do it very
well because it's extremely complicated to detect what language it is,
unless specified: both English and Spanish have Latin alphabet, and
there are plenty of Spanish words with no diacritics in them, so you
can't say to your PC just "Interpret these characters as English, and
those characters as Spanish". Inspite of what I said, voice switching
seems to work reasonably well in Office apps and in web browsers.
Good luck in your learning!


--
With best regards from Ukraine,
Andre
Skype: menelion_elensule
Twitter (English only): @AndrePolykanine

------------ Original message ------------
From: EmilDsmith@... <EmilDsmith@...>
To: jfw@groups.io
Date created: , 11:35:27 PM
Subject: Question about learning foreign languages with JAWS


Hi everyone,



My name is Emil Smith and I am taking a Spanish class for college this upcoming semester. I’m curious if anyone has any info on how this work, the area I’m curious about is how to deal with entering Spanish characters for homework assignments. If anyone has previous experience with this or has any tips, that would appreciated, thanks!

moderated Re: Question about learning foreign languages with JAWS

James Malone
 

Hi Brian, James Malone here. I’m afraid that Emil has set his preferences to no mail, but has selected to go on line to pull his answers off the web site from the list. He is one of my students, so what I can do is forward this message to him. You can however email him off list if you like and explain this as well. I’m sure he’ll want to hear from you. I also explained that this list is not too busy, and he won’t get slammed by a bunch of emails in regards to any issues that doesn’t pertain to him depending on where he has his email settings. He was receiving daily  digest, but decided to go with no mail. If you can please! Explain that the list has several ways to give information to him with several kinds of control without overloading his email?

Thanks for your help.

James

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Brian Vogel
Sent: Saturday, June 30, 2018 8:17 AM
To: main@jfw.groups.io
Subject: Re: Question about learning foreign languages with JAWS

 

Emil,

         Presuming you're using MS-Word to do your assignments, it is easy to insert individual characters related to most common foreign (using English as the base) languages with a series of keystrokes.  See the search results from, https://duckduckgo.com/?q=MS-Word+foreign+characters, for the tutorial of your choice.

         If you happen to know the name (or a significant part of it) for a given character you're looking for you can use the Windows built-in Character Map program pretty effectively with a screen reader, too.  If you enter enough of the character name in the search field you can often limit the returned list to one, but this works much better for special characters such as "Registered,"  "Degree," etc., than it does for letters with diacritics.
--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

     Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many of our people need it sorely on these accounts. Broad, wholesome, charitable views of men and things cannot be acquired by vegetating in one little corner of the earth all one's lifetime.

         ~ Mark Twain

moderated Re: backstage view in Office 2016

 

On Fri, Jun 29, 2018 at 07:41 am, Sieghard Weitzel wrote:
much easier to use Control+F12 rather than File > Open.
Just to "complete the circle" you can use CTRL+O for Open just as you can use CTRL+S to Save.  These are both commands of MS-Office programs, and probably a lot more, as hitting CTRL+S here in Chrome also opens the save dialog, but what it wants to save is an HTML file.  CTRL+O also brings up an Open dialog in Chrome.
 
--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

     Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many of our people need it sorely on these accounts. Broad, wholesome, charitable views of men and things cannot be acquired by vegetating in one little corner of the earth all one's lifetime.

         ~ Mark Twain

Re: alt and control key seem to be stuck

 

On Mon, Jul 2, 2018 at 06:27 am, ratshtron wrote:
although the sticking of keys isn't a JAWS problem! has something to do with windows I believe. but you may be correct that windows and JAWS don't get along too well at times.
When it comes down to it, that's really not relevant.   Software developers such as Freedom Scientific have far closer contact with Microsoft Support than any of us as end users do.   If they determine that it is an underlying problem with Windows, which it could well be, they can exert more and faster pressure on Microsoft than any of us as individual end users can.

All we can do is diligently make reports when that's become necessary and let the folks who do the fixing figure out what, exactly, needs fixing.
 
--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

     Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many of our people need it sorely on these accounts. Broad, wholesome, charitable views of men and things cannot be acquired by vegetating in one little corner of the earth all one's lifetime.

         ~ Mark Twain

Re: alt and control key seem to be stuck

 

On Mon, Jul 2, 2018 at 06:12 am, kevin meyers wrote:
Maybe everyone should send emails to support.freedomscientific.com to explain the various issues. The more people will do it the more Freedom
Scientific will do something about it. If you do, don't sound mad or in anon-professional manner. BE as pleasant as possible.
That is indeed correct.   I've been on "the other side" as a software developer (and doing technical support) and it is impossible to fix what is not reported and/or what you cannot replicate.

It doesn't even require that the reporter be pleasant, as they can be plenty peeved, but be businesslike and, above all, accurate and descriptive of what one needs to do to replicate the problem.  That's even if it's an intermittent problem where 9 times out of 10 it will not occur and if that's the case that should be mentioned, too.

It is not unusual for something that's been working perfectly for a very long period of time to break for a given user if either they start doing something they hadn't been that triggers a code segment that has always had a bug, but that they've never been using before, or if some code change somehow didn't get tested for one path of flow that the end user is now pushing it through.   Both of the latter are far easier to isolate and fix, which I'd hope would be everyone's goal, if you can give at least some description of what you have been doing when said event occurs.

Even if you can't, making a report saying you're having a sudden set of symptoms that you've not had, or not had at all frequently, before allows a case to be made for further examination, and faster examination, if there are a number of complaints about said symptoms coming in all at once or in very rapid succession.
 
--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

     Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many of our people need it sorely on these accounts. Broad, wholesome, charitable views of men and things cannot be acquired by vegetating in one little corner of the earth all one's lifetime.

         ~ Mark Twain

moderated Re: backstage view in Office 2016

Van Lant, Robin
 

Thanks for the F12 recommendation. That will be a sanity saver for sure. I did turn off the back-stage on save and open, but it still shows up if I need to do a Save As to change the file name, which I often do at work. F12 seems to work for this.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Friday, June 29, 2018 8:42 AM
To: main@jfw.groups.io
Subject: Re: backstage view in Office 2016

While I turn off backstage and the start screen, I agree that F12 for saving is a much nicer dialogue as Control+S and the same goes for opening files, much easier to use Control+F12 rather than File > Open.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Friday, June 29, 2018 6:53 AM
To: main@jfw.groups.io
Subject: Re: backstage view in Office 2016

press alt for the ribbon bar, then f for file and t for options.
down arrow to the save category.
press tab until you get to the Don’t show backstage view when saving or opening files option and spacebar to check it.
press tab or shift+tab to the ok button and spacebar on it.






-------- Original Message --------
From: Richard Turner [mailto:richardturner42@...]
Sent: Friday, Jun 29, 2018 9:04 AM EST
To: main@jfw.groups.io
Subject: backstage view in Office 2016


If you go into the file menu, Options, you can turn off the Backstage
view, then you can go back to using control-s to save a document.
It is some visual thing that is useless to screen reader users.
Richard



"Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many
of our people need it sorely on these accounts. Broad, wholesome,
charitable views of men and things cannot be acquired by vegetating in
one little corner of the earth all one's lifetime." - Mark Twain



On Jun 29, 2018, at 4:23 AM, Ann Byrne
<annakb@...<mailto:annakb@...>> wrote:

If you use f12 for save-as, the backstage view doesn't come up.
At 02:09 AM 6/29/2018, you wrote:
I'm brand new to Office 2016. Can someone explain or point me to
something that explains the backstage view? I could not figure out how
to even save a Word document with that thing enabled. I found a place
in the Word options to hide the backstage view when saving files, but I
do not know if I am giving up some benefit by having it off. Even if it
is hidden during a Save, it seems to still come up when I try to do Save As.

I'm also confused by how the Recent files section seems to have changed
from Office 2010. I heavily relied on Pinned items in my Recent Files
list to access common files. Any guidance?



Robin Van Lant | Sr. Program Manager
Key Equipment Finance | 720-304-1060



This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you
are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information. If
you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether electronic
or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or
redisclose such information for any purpose other than to provide the
services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or
services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional
E-mails' in the SUBJECT line.

















This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the
SUBJECT line.

Re: alt and control key seem to be stuck

ratshtron
 

hahahaha! that's funny! although the sticking of keys isn't a JAWS problem! has something to do with windows I believe. but you may be correct that windows and JAWS don't get along too well at times.


Legend has it that on Monday 7/2/2018 08:11 AM, kevin meyers said:
----------------------------------------
Maybe everyone should send emails to support.freedomscientific.com to
explain the various issues. The more people will do it the more Freedom
Scientific will do something about it. If you do, don't sound mad or in a
non-professional manner. BE as pleasant as possible.

Kevin Meyers

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Monday, July 2, 2018 7:31 AM
To: main@jfw.groups.io
Subject: Re: alt and control key seem to be stuck

When those keys stick on my computers, I perform percussive maintenance.
With one hand on each stuck key, I hit them *alternately about fifteen
times. Maybe just ten, but it sure makes me feel better ... and the keys
are unstuck besides.

Good luck!
At 07:09 AM 7/2/2018, you wrote:
This is the first time I had this problem occur on a repetitive basis.
I mean it happens over and over and over again. I will unload Jaws and
reload multiple times and after a short time the problem comes back.

Kevin Meyers

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of ratshtron
Sent: Sunday, July 1, 2018 9:17 PM
To: main@jfw.groups.io
Subject: Re: alt and control key seem to be stuck

hmmm, the sticking of alt and ctrl keys has been around for a very long
time, lol! pressing both ctrl keys and or alt keys several times
quickly will unstick them most of the time. I can remember having the
problem way back to 1998 if not earlier.


Legend has it that on Sunday 7/1/2018 05:13 PM, HH. Smith Jr. said:
----------------------------------------
I've had this reoccurring, intermittent issue from version 15. I
reported it but I couldn't repeat the problem for the technical
support person. so, I kind of figure a fix out. I would hold the
control and alt key at the same time and tap the escape key a few
times and that seems to work about 95% of the time.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Sunday, July 1, 2018 12:12 PM
To: main@jfw.groups.io
Subject: Re: alt and control key seem to be stuck

This is something I have seen with computers since 2003. You can
either do what you did, and unload JAWS, or simply press both ALT
keys sequentially. That usually unsticks them.

Bill White
<mailto:billwhite92701@...>billwhite92701@...

From: <mailto:main@jfw.groups.io>main@jfw.groups.io
[mailto:main@jfw.groups.io] On Behalf Of kevin meyers
Sent: Sunday, July 1, 2018 9:09 AM
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Subject: alt and control key seem to be stuck

Hello,

I'm using windows10 and jaws2018. Suddenly either the alt or control
key is stated when pressing enter, any of the arrow keys and so on.
If I unload Jaws and reload it goes away. What could be causing this
to suddenly occur?

Cheers,


Kevin Meyers

----------------------------------------










----------------------------------------

Re: alt and control key seem to be stuck

ratshtron
 

you have been lucky then because as I mentioned earlier, this problem has been around quite awhile! LOL!
I had said since 1998, but it may have been since 1999. can't remember if windows ME started or windows XP but way back then.


Legend has it that on Monday 7/2/2018 07:09 AM, kevin meyers said:
----------------------------------------
This is the first time I had this problem occur on a repetitive basis. I
mean it happens over and over and over again. I will unload Jaws and reload
multiple times and after a short time the problem comes back.

Kevin Meyers

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of ratshtron
Sent: Sunday, July 1, 2018 9:17 PM
To: main@jfw.groups.io
Subject: Re: alt and control key seem to be stuck

hmmm, the sticking of alt and ctrl keys has been around for a very long
time, lol! pressing both ctrl keys and or alt keys several times quickly
will unstick them most of the time. I can remember having the problem way
back to 1998 if not earlier.


Legend has it that on Sunday 7/1/2018 05:13 PM, HH. Smith Jr. said:
----------------------------------------
I've had this reoccurring, intermittent issue from version 15. I
reported it but I couldn't repeat the problem for the technical support
person. so, I kind of figure a fix out. I would hold the control and
alt key at the same time and tap the escape key a few times and that
seems to work about 95% of the time.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Sunday, July 1, 2018 12:12 PM
To: main@jfw.groups.io
Subject: Re: alt and control key seem to be stuck

This is something I have seen with computers since 2003. You can either
do what you did, and unload JAWS, or simply press both ALT keys
sequentially. That usually unsticks them.

Bill White
<mailto:billwhite92701@...>billwhite92701@...

From: <mailto:main@jfw.groups.io>main@jfw.groups.io
[mailto:main@jfw.groups.io] On Behalf Of kevin meyers
Sent: Sunday, July 1, 2018 9:09 AM
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Subject: alt and control key seem to be stuck

Hello,

I'm using windows10 and jaws2018. Suddenly either the alt or control
key is stated when pressing enter, any of the arrow keys and so on.
If I unload Jaws and reload it goes away. What could be causing this to
suddenly occur?

Cheers,


Kevin Meyers

----------------------------------------






----------------------------------------

Re: alt and control key seem to be stuck

kevin meyers
 

Maybe everyone should send emails to support.freedomscientific.com to
explain the various issues. The more people will do it the more Freedom
Scientific will do something about it. If you do, don't sound mad or in a
non-professional manner. BE as pleasant as possible.

Kevin Meyers

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Monday, July 2, 2018 7:31 AM
To: main@jfw.groups.io
Subject: Re: alt and control key seem to be stuck

When those keys stick on my computers, I perform percussive maintenance.
With one hand on each stuck key, I hit them *alternately about fifteen
times. Maybe just ten, but it sure makes me feel better ... and the keys
are unstuck besides.

Good luck!
At 07:09 AM 7/2/2018, you wrote:
This is the first time I had this problem occur on a repetitive basis.
I mean it happens over and over and over again. I will unload Jaws and
reload multiple times and after a short time the problem comes back.

Kevin Meyers

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of ratshtron
Sent: Sunday, July 1, 2018 9:17 PM
To: main@jfw.groups.io
Subject: Re: alt and control key seem to be stuck

hmmm, the sticking of alt and ctrl keys has been around for a very long
time, lol! pressing both ctrl keys and or alt keys several times
quickly will unstick them most of the time. I can remember having the
problem way back to 1998 if not earlier.


Legend has it that on Sunday 7/1/2018 05:13 PM, HH. Smith Jr. said:
----------------------------------------
I've had this reoccurring, intermittent issue from version 15. I
reported it but I couldn't repeat the problem for the technical
support person. so, I kind of figure a fix out. I would hold the
control and alt key at the same time and tap the escape key a few
times and that seems to work about 95% of the time.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Sunday, July 1, 2018 12:12 PM
To: main@jfw.groups.io
Subject: Re: alt and control key seem to be stuck

This is something I have seen with computers since 2003. You can
either do what you did, and unload JAWS, or simply press both ALT
keys sequentially. That usually unsticks them.

Bill White
<mailto:billwhite92701@...>billwhite92701@...

From: <mailto:main@jfw.groups.io>main@jfw.groups.io
[mailto:main@jfw.groups.io] On Behalf Of kevin meyers
Sent: Sunday, July 1, 2018 9:09 AM
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Subject: alt and control key seem to be stuck

Hello,

I'm using windows10 and jaws2018. Suddenly either the alt or control
key is stated when pressing enter, any of the arrow keys and so on.
If I unload Jaws and reload it goes away. What could be causing this
to suddenly occur?

Cheers,


Kevin Meyers

----------------------------------------






Re: alt and control key seem to be stuck

Ann Byrne
 

When those keys stick on my computers, I perform percussive maintenance. With one hand on each stuck key, I hit them *alternately about fifteen times. Maybe just ten, but it sure makes me feel better ... and the keys are unstuck besides.

Good luck!

At 07:09 AM 7/2/2018, you wrote:
This is the first time I had this problem occur on a repetitive basis. I
mean it happens over and over and over again. I will unload Jaws and reload
multiple times and after a short time the problem comes back.

Kevin Meyers

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of ratshtron
Sent: Sunday, July 1, 2018 9:17 PM
To: main@jfw.groups.io
Subject: Re: alt and control key seem to be stuck

hmmm, the sticking of alt and ctrl keys has been around for a very long
time, lol! pressing both ctrl keys and or alt keys several times quickly
will unstick them most of the time. I can remember having the problem way
back to 1998 if not earlier.


Legend has it that on Sunday 7/1/2018 05:13 PM, HH. Smith Jr. said:
----------------------------------------
I've had this reoccurring, intermittent issue from version 15. I
reported it but I couldn't repeat the problem for the technical support
person. so, I kind of figure a fix out. I would hold the control and
alt key at the same time and tap the escape key a few times and that
seems to work about 95% of the time.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Sunday, July 1, 2018 12:12 PM
To: main@jfw.groups.io
Subject: Re: alt and control key seem to be stuck

This is something I have seen with computers since 2003. You can either
do what you did, and unload JAWS, or simply press both ALT keys
sequentially. That usually unsticks them.

Bill White
<mailto:billwhite92701@...>billwhite92701@...

From: <mailto:main@jfw.groups.io>main@jfw.groups.io
[mailto:main@jfw.groups.io] On Behalf Of kevin meyers
Sent: Sunday, July 1, 2018 9:09 AM
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Subject: alt and control key seem to be stuck

Hello,

I'm using windows10 and jaws2018. Suddenly either the alt or control
key is stated when pressing enter, any of the arrow keys and so on.
If I unload Jaws and reload it goes away. What could be causing this to
suddenly occur?

Cheers,


Kevin Meyers

----------------------------------------






moderated Re: Goldwave

Richard Turner
 

A point of personal privilege.
Goldwave is simply the most affordable professional sound editing software on the market. I started using Goldwave about 16 years ago. In those days, I was using Window-Eyes and through many hours of consulting with the Goldwave developer, Chris, and GW Micro, I created set files for Goldwave that GW Micro eventually included as factory set files.
Today I am using it with JAWS 2018, and it still is fully accessible from the keyboard. Chris maintains his commitment to accessibility.
I only use a fraction of its potential. The program has expanded and added new features over the years that many developers would have charged for, but Chris has maintained the one fee for life policy.
It is worth a lot more than the approximately $45,  one time charge for the full version. If I were buying it today, I'd gladly pay $100 for it.
Richard

"Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many of our people need it sorely on these accounts. Broad, wholesome, charitable views of men and things cannot be acquired by vegetating in one little corner of the earth all one's lifetime." - Mark Twain




On Jul 2, 2018, at 3:37 AM, Dave Durber <d.durber@...> wrote:

Hello Mario:

I have been meaning to post the below information for some weeks but kept forgetting to do so. Well! here it is:

The only difference between the demonstration version of GoldWave and the licensed version is, that after 150 keystrokes, messages appear, prompting you to upgrade. In addition, as you use the demonstration version for a longer period, there are increasing delays in response times for functions to be performed. Lastly, the maximum number of keystrokes which can be performed in the demonstration version, is three thousand.

HTH

Dave Durber

----- Original Message ----- From: "Mario" <mrb620@...>
To: <main@jfw.groups.io>
Sent: Wednesday, June 13, 2018 2:51 PM
Subject: Re: Goldwave


I remember it was 300 keystrokes. it's that low to get the user to buy
it. in my opinion, it should be increased to 1000 like Dave suggested or
it should be a cripple free 30 day trial until you register it.


-------- Original Message --------
From: Dave Durber [mailto:d.durber@...]
Sent: Wednesday, Jun 13, 2018 5:29 AM EST
To: main@jfw.groups.io
Subject: Goldwave

If I am not mistaken, when you install Goldwave, you are allowed 1000
keystrokes, before you decide to purchase a license or not.

HTH

Sincerely:

Dave Durber

----- Original Message ----- From: "netbat66" <netbat66@...>
To: <main@jfw.groups.io>
Sent: Tuesday, June 12, 2018 4:18 AM
Subject: Re: Goldwave


i think the trial lets you use it 100 times before you have to pay for it.

-----Original Message----- From: Richard Turner
Sent: Monday, June 11, 2018 7:57 PM
To: main@jfw.groups.io
Subject: Re: Goldwave



GoldWave will work with most Windows versions. What I brought up was
about your
recording Windows sounds, and therefore things you hear over the speakers.
Download GoldWave and read about how to select recording what you hear
in the
manual, and then decide if you want to pay for it. You can use all of its
functions before you pay.
Chances are, you can do what you want.
Best to try it and see.
Richard




"Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many
of our
people need it sorely on these accounts. Broad, wholesome, charitable
views of
men and things cannot be acquired by vegetating in one little corner of the
earth all one's lifetime." - Mark Twain








On Jun 11, 2018, at 7:45 PM, Bill White <billwhite92701@...>
wrote:


Hi, Amanda. Do you know if you have Windows 7 or Windows 10?

Bill White
billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Amanda
Berkley
Sent: Monday, June 11, 2018 6:43 PM
To: main@jfw.groups.io
Subject: Re: Goldwave

Is there a way to know what version of Windows I have to see if it's
a version that will work with Goldwave?

On 6/10/18, Richard Turner <richardturner42@...> wrote:
Some versions had blocked recording what you hear over the speakers, which
also blocks internet streaming from being recorded, since I have no idea
what version of Windows you are running, I thought it would be helpful to
say that since I could not say absolutely that yes, you can record what you
want with Goldwave.

Perhaps that was simply too much information, but I don't like making
statements too broadly either.

Richard




“The secret is not to make your music louder, but to make the world
quieter.”
- Mitch Albom from The Magic Strings of Frankie Presto, page 1

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Amanda Berkley
Sent: Sunday, June 10, 2018 11:00 AM
To: main@jfw.groups.io
Subject: Re: Goldwave

What do you mean if my version of windows allows it?

I have Windows 10...

On 6/10/18, Richard Turner <richardturner42@...> wrote:
Yes, if your version of Windows allows it.
Goldwave is my all time favorite application for recording.
You will want to read the manual sections about selecting your recording
source.
You also will want the Goldwave scripts for Jaws, in which case it works
very well with Jaws. Here is the link to the scripts.
https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.jaws-users.com%2Fscripts%2FAudio%2Fgoldwave_5-6_jaws_scripts_2_0.zip&data=02%7C01%7C%7C16c1ac436cd94d6d858108d5cefbec9a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636642503749538223&sdata=I1gYuIwWoqopXbvy3bJh4lLpBoyNBXR76cZ51rG3%2BPY%3D&reserved=0



HTH,
Richard




“The secret is not to make your music louder, but to make the world
quieter.”
- Mitch Albom from The Magic Strings of Frankie Presto, page 1

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Amanda Berkley
Sent: Sunday, June 10, 2018 10:29 AM
To: main@jfw.groups.io
Subject: Goldwave

Can you record system sound with Goldwave?

I'm looking for something that I can record something from iTunes or
Windows Media Player, and the recording will stop when the track ends.
Does this sound like something Goldwave can do?

Does Goldwave play nice with JAWS?

Thanks,
Amanda

































.








Re: alt and control key seem to be stuck

kevin meyers
 

This is the first time I had this problem occur on a repetitive basis. I
mean it happens over and over and over again. I will unload Jaws and reload
multiple times and after a short time the problem comes back.

Kevin Meyers

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of ratshtron
Sent: Sunday, July 1, 2018 9:17 PM
To: main@jfw.groups.io
Subject: Re: alt and control key seem to be stuck

hmmm, the sticking of alt and ctrl keys has been around for a very long
time, lol! pressing both ctrl keys and or alt keys several times quickly
will unstick them most of the time. I can remember having the problem way
back to 1998 if not earlier.


Legend has it that on Sunday 7/1/2018 05:13 PM, HH. Smith Jr. said:
----------------------------------------
I've had this reoccurring, intermittent issue from version 15. I
reported it but I couldn't repeat the problem for the technical support
person. so, I kind of figure a fix out. I would hold the control and
alt key at the same time and tap the escape key a few times and that
seems to work about 95% of the time.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Sunday, July 1, 2018 12:12 PM
To: main@jfw.groups.io
Subject: Re: alt and control key seem to be stuck

This is something I have seen with computers since 2003. You can either
do what you did, and unload JAWS, or simply press both ALT keys
sequentially. That usually unsticks them.

Bill White
<mailto:billwhite92701@...>billwhite92701@...

From: <mailto:main@jfw.groups.io>main@jfw.groups.io
[mailto:main@jfw.groups.io] On Behalf Of kevin meyers
Sent: Sunday, July 1, 2018 9:09 AM
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Subject: alt and control key seem to be stuck

Hello,

I'm using windows10 and jaws2018. Suddenly either the alt or control
key is stated when pressing enter, any of the arrow keys and so on.
If I unload Jaws and reload it goes away. What could be causing this to
suddenly occur?

Cheers,


Kevin Meyers

----------------------------------------

Re: sound card

Dan Longmore
 

 A sound card is a piece of hardware either on the motherboard or an independent card. Sound cards have drivers or small pieces of software that enable them to work with the computer. I doubt this is a sound card issue as you would be having other problems. Try doing a repair on jars, 


From: main@jfw.groups.io <main@jfw.groups.io> on behalf of Stan Holdeman <sholdeman@...>
Sent: Monday, July 2, 2018 6:01:43 AM
To: jfw@groups.io
Subject: sound card
 

Using Windows 10 and Jaws 2018.

 

My eloquence voice seems to be growling a lot lately. Is that a sound card going bad?

 

Here I reveal my ignorance—what is a sound card? Is it hardware or software?

 

Stan

 

moderated Re: Goldwave

Dave Durber
 

Hello Mario:

I have been meaning to post the below information for some weeks but kept forgetting to do so. Well! here it is:

The only difference between the demonstration version of GoldWave and the licensed version is, that after 150 keystrokes, messages appear, prompting you to upgrade. In addition, as you use the demonstration version for a longer period, there are increasing delays in response times for functions to be performed. Lastly, the maximum number of keystrokes which can be performed in the demonstration version, is three thousand.

HTH

Dave Durber

----- Original Message -----
From: "Mario" <mrb620@...>
To: <main@jfw.groups.io>
Sent: Wednesday, June 13, 2018 2:51 PM
Subject: Re: Goldwave


I remember it was 300 keystrokes. it's that low to get the user to buy
it. in my opinion, it should be increased to 1000 like Dave suggested or
it should be a cripple free 30 day trial until you register it.


-------- Original Message --------
From: Dave Durber [mailto:d.durber@...]
Sent: Wednesday, Jun 13, 2018 5:29 AM EST
To: main@jfw.groups.io
Subject: Goldwave

If I am not mistaken, when you install Goldwave, you are allowed 1000
keystrokes, before you decide to purchase a license or not.

HTH

Sincerely:

Dave Durber

----- Original Message ----- From: "netbat66" <netbat66@...>
To: <main@jfw.groups.io>
Sent: Tuesday, June 12, 2018 4:18 AM
Subject: Re: Goldwave


i think the trial lets you use it 100 times before you have to pay for it.

-----Original Message----- From: Richard Turner
Sent: Monday, June 11, 2018 7:57 PM
To: main@jfw.groups.io
Subject: Re: Goldwave



GoldWave will work with most Windows versions. What I brought up was
about your
recording Windows sounds, and therefore things you hear over the speakers.
Download GoldWave and read about how to select recording what you hear
in the
manual, and then decide if you want to pay for it. You can use all of its
functions before you pay.
Chances are, you can do what you want.
Best to try it and see.
Richard




"Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many
of our
people need it sorely on these accounts. Broad, wholesome, charitable
views of
men and things cannot be acquired by vegetating in one little corner of the
earth all one's lifetime." - Mark Twain








On Jun 11, 2018, at 7:45 PM, Bill White <billwhite92701@...>
wrote:


Hi, Amanda. Do you know if you have Windows 7 or Windows 10?

Bill White
billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Amanda
Berkley
Sent: Monday, June 11, 2018 6:43 PM
To: main@jfw.groups.io
Subject: Re: Goldwave

Is there a way to know what version of Windows I have to see if it's
a version that will work with Goldwave?

On 6/10/18, Richard Turner <richardturner42@...> wrote:
Some versions had blocked recording what you hear over the speakers, which
also blocks internet streaming from being recorded, since I have no idea
what version of Windows you are running, I thought it would be helpful to
say that since I could not say absolutely that yes, you can record what you
want with Goldwave.

Perhaps that was simply too much information, but I don't like making
statements too broadly either.

Richard




“The secret is not to make your music louder, but to make the world
quieter.”
- Mitch Albom from The Magic Strings of Frankie Presto, page 1

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Amanda Berkley
Sent: Sunday, June 10, 2018 11:00 AM
To: main@jfw.groups.io
Subject: Re: Goldwave

What do you mean if my version of windows allows it?

I have Windows 10...

On 6/10/18, Richard Turner <richardturner42@...> wrote:
Yes, if your version of Windows allows it.
Goldwave is my all time favorite application for recording.
You will want to read the manual sections about selecting your recording
source.
You also will want the Goldwave scripts for Jaws, in which case it works
very well with Jaws. Here is the link to the scripts.
https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.jaws-users.com%2Fscripts%2FAudio%2Fgoldwave_5-6_jaws_scripts_2_0.zip&data=02%7C01%7C%7C16c1ac436cd94d6d858108d5cefbec9a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636642503749538223&sdata=I1gYuIwWoqopXbvy3bJh4lLpBoyNBXR76cZ51rG3%2BPY%3D&reserved=0



HTH,
Richard




“The secret is not to make your music louder, but to make the world
quieter.”
- Mitch Albom from The Magic Strings of Frankie Presto, page 1

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Amanda Berkley
Sent: Sunday, June 10, 2018 10:29 AM
To: main@jfw.groups.io
Subject: Goldwave

Can you record system sound with Goldwave?

I'm looking for something that I can record something from iTunes or
Windows Media Player, and the recording will stop when the track ends.
Does this sound like something Goldwave can do?

Does Goldwave play nice with JAWS?

Thanks,
Amanda

































.




sound card

Stan Holdeman
 

Using Windows 10 and Jaws 2018.

 

My eloquence voice seems to be growling a lot lately. Is that a sound card going bad?

 

Here I reveal my ignorance—what is a sound card? Is it hardware or software?

 

Stan

 

moderated Re: Key mapper needed

 

SharpKeys is popular, but since it involves registry editing one must be very careful.

See:  https://www.thewindowsclub.com/remap-keyboard-keys-windows-sharpkeys

That article also mentions KeyTweak, see:  https://www.thewindowsclub.com/keytweak-reassign-redefine-keyboard-keys which might be easier.
--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

     Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many of our people need it sorely on these accounts. Broad, wholesome, charitable views of men and things cannot be acquired by vegetating in one little corner of the earth all one's lifetime.

         ~ Mark Twain

Re: alt and control key seem to be stuck

ratshtron
 

hmmm, the sticking of alt and ctrl keys has been around for a very long time, lol! pressing both ctrl keys and or alt keys several times quickly will unstick them most of the time. I can remember having the problem way back to 1998 if not earlier.


Legend has it that on Sunday 7/1/2018 05:13 PM, HH. Smith Jr. said:
----------------------------------------
I've had this reoccurring, intermittent issue from version 15. I reported it but I couldn't repeat the problem for the technical support person. so, I kind of figure a fix out. I would hold the control and alt key at the same time and tap the escape key a few times and that seems to work about 95% of the time.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Sunday, July 1, 2018 12:12 PM
To: main@jfw.groups.io
Subject: Re: alt and control key seem to be stuck

This is something I have seen with computers since 2003. You can either do what you did, and unload JAWS, or simply press both ALT keys sequentially. That usually unsticks them.

Bill White
<mailto:billwhite92701@...>billwhite92701@...

From: <mailto:main@jfw.groups.io>main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of kevin meyers
Sent: Sunday, July 1, 2018 9:09 AM
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Subject: alt and control key seem to be stuck

Hello,

I'm using windows10 and jaws2018. Suddenly either the alt or control key is stated when pressing enter, any of the arrow keys and so on. If I unload Jaws and reload it goes away. What could be causing this to suddenly occur?

Cheers,


Kevin Meyers

----------------------------------------

moderated Re: Software for canging volume in audio tracks for .flac and .wav files

Tom <tomcat509@...>
 

Thanks to those who answered my query regarding mp3 files with varying
volume levels.

I'll go and get the program mentioned.

Cheers
Tom

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dave
Durber
Sent: Sunday, 1 July 2018 8:21 PM
To: main@jfw.groups.io
Subject: Re: Software for canging volume in audio tracks for .flac and .wav
files

Hello Tom:

If you have a folder or several folders containing audio files ripped to
.mp3 format, which, when played, play at varying sound levels, you can use
MP3 Gain to change the volume of all the .MP3 files to the same audio level.

I am using this program, curtacy of Steve Matzura, who suggested it to me.
Below, are two sites where you can download MP3 Gain:

https://mp3gain.en.softonic.com/download

and

https://sourceforge.net/projects/mp3gain/

Sincerely:

Dave Durber

----- Original Message -----
From: "Tom" <tomcat509@...>
To: <main@jfw.groups.io>
Sent: Sunday, July 01, 2018 2:03 AM
Subject: Re: Software for canging volume in audio tracks for .flac and .wav
files


Hi,
I also would like to know the answer to this question.

Is there such a program which, when run against a folder of music mp3
files, would set all file volumes to a similar level.

Currently I have a few usb sticks containing numerous music tracks by
different artists but each track seems to have a different volume level.
It
would be great to set all tracks to a similar volume level regardless of
which player was used.


Thanks
Tom



-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dave
Durber
Sent: Saturday, 30 June 2018 12:38 AM
To: main@jfw.groups.io
Subject: Software for canging volume in audio tracks for .flac and .wav
files

Hello Everyone:

When I rip audio CD's to flac lossless audio, for example, the volume can
vary considerably from track to track.

I appreciate that the original volume was set at the original recording
company.

Does anyone know of a program, which will allow me to set the audio in the
.flac files, to 0 DB or +1 DB across all tracks and which is accessible
using JAWS?

Thanks in anticipation.

Sincerely:

Dave Durber