Date   

moderated Re: What are the differences between indeed and monster in terms of job title search results?

Jim Fettgather
 

Here is the way that I make absolutely certain that I get the results I want.

When you are first on the site, you have probably noticed the two edit boxes that let you type in your key words and location.
This is not really a good way to search.
Instead, when first on the site, click Browse Jobs, it will be in the Jaws list of links.
When that page loads, click Advanced job search.
You will have many edit boxes, and the second one is, "with the exact phrase."
You may get fewer results typing into this edit box, but they will be much more targetted and reflect exactly what you want.
You may continue to tab through, you will have the opportunity to choose from which web sites your jobs will appear, to choose staffing agencies or not, how close you want the listings to be, with a combo box that lets you adjust the number of miles you are willing to travel, an edit box for your city and state, and finally, the ability to specify how recent you wish the postings to be, such as any time, the last 15 days, the last 7 days, and so on.
This is definitely the best way to use the indeed site to get the results for which you are looking.
Hope this helps.

-----Original Message-----
From: David Ingram
Sent: Saturday, June 30, 2018 12:41 AM
To: main@jfw.groups.io
Subject: What are the differences between indeed and monster in terms of job title search results?

Hi list members, i'd like to know if anyone has had semular experences with indeed and monster when it comes to job title search results? From What I've seen so far I have some of the same problems that I've experienced with monster when it comes to job title search results. I'm trying to type in job title of music producer on indeed but i'm not sure of what I could be doing wrong. Should I be using quotes around the words or is there something else that needs to be done in order that I might perform a proper job search on this job search hiring site. Thank you for any information that you might have concerning this question.


moderated Re: What are the differences between indeed and monster in terms of job title search results?

paul lemm
 

Hi,

Although I appreciate this isn't answering your question, but as someone who's worked in recruitment and used both sites to advertise job roles, I always found the response rate from candidates a lot higher on indeed than monster. Obviously certain job roles might be more effective on one than the other , but overall I found indeed a lot better than monster. Another site to try would be CV library , I always found their site accessibility with jaws good, but bear in mind with that comment I was looking from a point of view of a recruiter posting jobs rather than looking for jobs. But it’s a good site and very popular so has a lot of jobs advertised . I think probably the 4 most popular online job boards though in the UK are indeed, monster, Reid and cv library's , and for what its worth personally I have found indeed and cv library's my favourite out of those.


Paul

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of David Ingram
Sent: 30 June 2018 06:42
To: main@jfw.groups.io
Subject: What are the differences between indeed and monster in terms of job title search results?

Hi list members, i'd like to know if anyone has had semular experences with indeed and monster when it comes to job title search results? From What I've seen so far I have some of the same problems that I've experienced with monster when it comes to job title search results. I'm trying to type in job title of music producer on indeed but i'm not sure of what I could be doing wrong. Should I be using quotes around the words or is there something else that needs to be done in order that I might perform a proper job search on this job search hiring site. Thank you for any information that you might have concerning this question.


moderated Does anyone have an idea of indeeds turn around time for responding to problems?

David Ingram
 

Hi list members, i'd like to know if anyone might be able to find out some information concerning the turn around time that it may take for indeed to respond to users problems or questions? Thank you for any information that you might have. Thank you.


moderated What are the differences between indeed and monster in terms of job title search results?

David Ingram
 

Hi list members, i'd like to know if anyone has had semular experences with indeed and monster when it comes to job title search results? From What I've seen so far I have some of the same problems that I've experienced with monster when it comes to job title search results. I'm trying to type in job title of music producer on indeed but i'm not sure of what I could be doing wrong. Should I be using quotes around the words or is there something else that needs to be done in order that I might perform a proper job search on this job search hiring site. Thank you for any information that you might have concerning this question.


moderated Re: Question about learning foreign languages with JAWS

Ashleigh Piccinino
 

Hola,

     You can enter characters you need by turning your keyboard language to “U.S. International (written as U.S-I for my shortcut.” At least, I think that’s what it was called when I used Windows Vista. I’m pretty sure your instructor will have better knowledge of how to set up your keyboard/what it’s new layout will be called. However, I’ve heard that the CTRL key and shift will put your keyboard into the mode I’m describing. After you set the layout up, just press these keys together to get back to your regular U.S. keyboard. Another press of the keystroke takes you back to U.S.-I. I don’t know how to set that up for any languages, though. My teacher gave me instructions on this. I’m sorry I couldn’t be of any more help, but here’s what I do know about the new keyboard layout. Different keys do different things, and the accent key actually works. The apostrophe key turns into one which can perform accented letters. JAWS might say something like sidila or something when this is pressed alone. Keep in mind, I don’t have mine set up right now. However, if you wanted to make an accented i—Spanish is common for doing this/accented e’s too--, press the sidilla/apostrophe key followed by the letter you’re using (our example is I and/or e). it would put the accent on the letter in question, and that’s how you make accented letters. If you need that funny little thing over any n, I think you press your shift key along with your accent key, located to the left of one on the numbers row. This is with U.S.-I still enabled, keep in mind. Press your n now, and that should give you that specific sound which is used on words like ninio, I think. It’s been a while since I’ve taken online Spanish, though so can’t give a definite answer on how that n thing was formed. I really didn’t like U.S.-I and was glad when I could  use a normal U.S. keyboard again. Espero tienes un classe excellente de Espa!nal. that’s my best impression for, “I hope you have an excellent Spanish class.” Make sure your screen reader can speak Spanish as well—the voices for JAWS can switch if they find Spanish characters. Let me know how your course goes by e-mailing apiccinino@... or sending to the group. One more thing, hablar and all its forms is written with an h not just the a. however, it’s pronounced ablar—obviously with Spanish vocalization of aw on the a.

Adios,

Antonia – This was my Spanish name in High School but didn’t have one for college, so sad.

 

Sent from Mail for Windows 10

 


From: main@jfw.groups.io <main@jfw.groups.io> on behalf of EmilDsmith@... <EmilDsmith@...>
Sent: Friday, June 29, 2018 3:35:27 PM
To: jfw@groups.io
Subject: Question about learning foreign languages with JAWS
 

Hi everyone,

 

My name is Emil Smith and I am taking a Spanish class for college this upcoming semester. I’m curious if anyone has any info on how this work, the area I’m curious about is how to deal with entering Spanish characters for homework assignments. If anyone has previous experience with this or has any tips, that would appreciated, thanks!


moderated Re: Question about learning foreign languages with JAWS

Cristóbal
 

You can configure a Spanish language keyboard in the regional settings of your PC and enable the alt plus shift command to rotate among keyboards.

Unless I plan to write in Spanish for a good chunk though, I’ll just use the word processing short cut for Office of pressing the control plus ‘ (apostrophy) then the corresponding vowel. This will give me the accented A, E, I, O, or U. For the ñ, it’s control plus shift plus ` (grauv) key then n.  

You can also use the numbpad sequences. With the numlock set to on, Alt plus 1-6-4 gives you the ñ. Alt plus 1-3-0 gives you é. Alt plus 1-6-0 is á and so on.

Don’t forget too, that in Spanish, you also have the inverted question mark and exclamation mark.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of EmilDsmith@...
Sent: Friday, June 29, 2018 1:35 PM
To: jfw@groups.io
Subject: Question about learning foreign languages with JAWS

 

Hi everyone,

 

My name is Emil Smith and I am taking a Spanish class for college this upcoming semester. I’m curious if anyone has any info on how this work, the area I’m curious about is how to deal with entering Spanish characters for homework assignments. If anyone has previous experience with this or has any tips, that would appreciated, thanks!


moderated Question about learning foreign languages with JAWS

EmilDsmith@...
 

Hi everyone,

 

My name is Emil Smith and I am taking a Spanish class for college this upcoming semester. I’m curious if anyone has any info on how this work, the area I’m curious about is how to deal with entering Spanish characters for homework assignments. If anyone has previous experience with this or has any tips, that would appreciated, thanks!


moderated Re: audio ducking and Jaws and cortanna

Ashleigh Piccinino
 

I’m not sure I understand your question. You can turn off or on the audio ducking feature in your JAWS startup wizard. To get there, move to the JAWS window—insert j on a desktop keyboard, caplock j on a laptop, I guess. Press alt h to get to your help and up arrow until you hear “startup wizard.” Press enter on this. On the first page, right after “keyboard echo,” is the audio ducking setting. However, it says “Lower the volume of other programs while JAWS is speaking.” Note that other is in itallics in this message to emphasize. To my knowledge, and when I could use Cortana correctly with mike, JAWS did lower a lot so you heard the Cortana itself. I’m not sure you can duck JAWS itself, though—that’s for other programs/used for videos and stuff but isn’t working right now. Of course, I’m talking about the audio ducking feature. Need any more help? Feel free to contact back/contact the group.

Thank you,

Ashleigh Piccinino

 

Sent from Mail for Windows 10

 


From: main@jfw.groups.io <main@jfw.groups.io> on behalf of Nino Dagostino <ndagostino3@...>
Sent: Tuesday, June 26, 2018 6:49:30 AM
To: main@jfw.groups.io
Subject: audio ducking and Jaws and cortanna
 

Good morning:

 

Is there a way to turn off audio ducking so when using cortanna jaws ducks so low you cant here any thing from Jaws?

 

Any help would be appreciated.

 

 


moderated Re: jaws not reading names of devices in device manager

Dave Durber
 

Hello Mike:
 
Using a home built computer, running Windows 7 Professional and using JFW 2018.
 
I looked in Device Manager in my version of Windows, and under Human Devices, there are three devices listed, without any description as to what the devices are and what they do and what they are for.
 
This was also the case in Device Manager for Windows XP. I do not know about Windows Vista or Windows 8, but, I have know doubt the same would be true for those operating systems as well.
 
Sincerely:
 
Dave Durber
 
 

----- Original Message -----
Sent: Friday, June 29, 2018 9:06 PM
Subject: jaws not reading names of devices in device manager

Hey guys:

Using win10 with dell, and jaws 2018,

I am trying to turn on  my touch screen to use finger to swipe around screen like iphone;

I googled directions to do this,

And it said to open device manager,

Arrow down to “human interface devices” or something like that,

Then I am to expand that tab,

Then under that tab I am to right click on “hid compliant touch screen”

However, jaws doesn’t say the names of the devices,

It just says things like “hid compliant consumer device”

“hid compliant vendor defined device;

 

Shouldn’t jaws be saying what the devices are?

 

Please advise as necessary;

 


moderated jaws not reading names of devices in device manager

mike mcglashon
 

Hey guys:

Using win10 with dell, and jaws 2018,

I am trying to turn on  my touch screen to use finger to swipe around screen like iphone;

I googled directions to do this,

And it said to open device manager,

Arrow down to “human interface devices” or something like that,

Then I am to expand that tab,

Then under that tab I am to right click on “hid compliant touch screen”

However, jaws doesn’t say the names of the devices,

It just says things like “hid compliant consumer device”

“hid compliant vendor defined device;

 

Shouldn’t jaws be saying what the devices are?

 

Please advise as necessary;

 


moderated Re: Software for changing volume in audio tracks for .flac and .wav files

Dave Durber
 

Steve:

I new I got it rong as soon as I wrote the message. The only problem was, that, at the time of writing, the word "normalization" was not strong enough to push the word "equalization" out the way, which is why I got it rong. That is my excuse, and I am sticking to it.

Dave

----- Original Message -----
From: "Steve Matzura" <number6@...>
To: <main@jfw.groups.io>
Sent: Friday, June 29, 2018 6:22 PM
Subject: Re: Software for changing volume in audio tracks for .flac and .wav files


By the way, the term you want is normalization. Equalization refers to boosting or cutting bands of frequencies.


On 6/29/2018 12:01 PM, Dave Durber wrote:
Oh! by the way, my question is no way related in anyway to volume equalization.

The problem with equalization, is that, if the volume of a track or all the tracks, is higher than 0 DB or 1 DB, the resulting audio for the compressed audio, can lead to distortion, varying from mild to severe.

Sincerely:

Dave Durber

----- Original Message ----- From: "Dave Durber" <d.durber@...>
To: <main@jfw.groups.io>
Sent: Friday, June 29, 2018 3:38 PM
Subject: Software for canging volume in audio tracks for .flac and .wav files


Hello Everyone:

When I rip audio CD's to flac lossless audio, for example, the volume can vary considerably from track to track.

I appreciate that the original volume was set at the original recording company.

Does anyone know of a program, which will allow me to set the audio in the .flac files, to 0 DB or +1 DB across all tracks and which is accessible using JAWS?

Thanks in anticipation.

Sincerely:

Dave Durber







moderated Re: Software for changing volume in audio tracks for .flac and .wav files

Steve Matzura
 

By the way, the term you want is normalization. Equalization refers to boosting or cutting bands  of frequencies.

On 6/29/2018 12:01 PM, Dave Durber wrote:
Oh! by the way, my question is no way related in anyway to volume equalization.

The problem with equalization, is that, if the volume of a track or all the tracks, is higher than 0 DB or 1 DB, the resulting audio for the compressed audio, can lead to distortion, varying from mild to severe.

Sincerely:

Dave Durber

----- Original Message ----- From: "Dave Durber" <d.durber@...>
To: <main@jfw.groups.io>
Sent: Friday, June 29, 2018 3:38 PM
Subject: Software for canging volume in audio tracks for .flac and .wav files


Hello Everyone:

When I rip audio CD's to flac lossless audio, for example, the volume can vary considerably from track to track.

I appreciate that the original volume was set at the original recording company.

Does anyone know of a program, which will allow me to set the audio in the .flac files, to 0 DB or +1 DB across all tracks and which is accessible using JAWS?

Thanks in anticipation.

Sincerely:

Dave Durber






moderated Re: Software for changing volume in audio tracks for .flac and .wav files

Dave Durber
 

Oh! by the way, my question is no way related in anyway to volume equalization.

The problem with equalization, is that, if the volume of a track or all the tracks, is higher than 0 DB or 1 DB, the resulting audio for the compressed audio, can lead to distortion, varying from mild to severe.

Sincerely:

Dave Durber

----- Original Message -----
From: "Dave Durber" <d.durber@...>
To: <main@jfw.groups.io>
Sent: Friday, June 29, 2018 3:38 PM
Subject: Software for canging volume in audio tracks for .flac and .wav files


Hello Everyone:

When I rip audio CD's to flac lossless audio, for example, the volume can vary considerably from track to track.

I appreciate that the original volume was set at the original recording company.

Does anyone know of a program, which will allow me to set the audio in the .flac files, to 0 DB or +1 DB across all tracks and which is accessible using JAWS?

Thanks in anticipation.

Sincerely:

Dave Durber




moderated Re: backstage view in Office 2016

 

While I turn off backstage and the start screen, I agree that F12 for saving is a much nicer dialogue as Control+S and the same goes for opening files, much easier to use Control+F12 rather than File > Open.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Friday, June 29, 2018 6:53 AM
To: main@jfw.groups.io
Subject: Re: backstage view in Office 2016

press alt for the ribbon bar, then f for file and t for options.
down arrow to the save category.
press tab until you get to the Don’t show backstage view when saving or opening files option and spacebar to check it.
press tab or shift+tab to the ok button and spacebar on it.






-------- Original Message --------
From: Richard Turner [mailto:richardturner42@...]
Sent: Friday, Jun 29, 2018 9:04 AM EST
To: main@jfw.groups.io
Subject: backstage view in Office 2016


If you go into the file menu, Options, you can turn off the Backstage
view, then you can go back to using control-s to save a document.
It is some visual thing that is useless to screen reader users.
Richard



"Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many
of our people need it sorely on these accounts. Broad, wholesome,
charitable views of men and things cannot be acquired by vegetating in
one little corner of the earth all one's lifetime." - Mark Twain



On Jun 29, 2018, at 4:23 AM, Ann Byrne
<annakb@...<mailto:annakb@...>> wrote:

If you use f12 for save-as, the backstage view doesn't come up.
At 02:09 AM 6/29/2018, you wrote:
I'm brand new to Office 2016. Can someone explain or point me to
something that explains the backstage view? I could not figure out how
to even save a Word document with that thing enabled. I found a place
in the Word options to hide the backstage view when saving files, but I
do not know if I am giving up some benefit by having it off. Even if it
is hidden during a Save, it seems to still come up when I try to do Save As.

I'm also confused by how the Recent files section seems to have changed
from Office 2010. I heavily relied on Pinned items in my Recent Files
list to access common files. Any guidance?



Robin Van Lant | Sr. Program Manager
Key Equipment Finance | 720-304-1060



This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you
are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information. If
you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether electronic
or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or
redisclose such information for any purpose other than to provide the
services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or
services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional
E-mails' in the SUBJECT line.


moderated Software for canging volume in audio tracks for .flac and .wav files

Dave Durber
 

Hello Everyone:

When I rip audio CD's to flac lossless audio, for example, the volume can vary considerably from track to track.

I appreciate that the original volume was set at the original recording company.

Does anyone know of a program, which will allow me to set the audio in the .flac files, to 0 DB or +1 DB across all tracks and which is accessible using JAWS?

Thanks in anticipation.

Sincerely:

Dave Durber


moderated Re: backstage view in Office 2016

Mario
 

press alt for the ribbon bar, then f for file and t for options.
down arrow to the save category.
press tab until you get to the Don’t show backstage view when saving or
opening files option and spacebar to check it.
press tab or shift+tab to the ok button and spacebar on it.

-------- Original Message --------
From: Richard Turner [mailto:richardturner42@...]
Sent: Friday, Jun 29, 2018 9:04 AM EST
To: main@jfw.groups.io
Subject: backstage view in Office 2016


If you go into the file menu, Options, you can turn off the Backstage
view, then you can go back to using control-s to save a document.
It is some visual thing that is useless to screen reader users.
Richard



"Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many
of our people need it sorely on these accounts. Broad, wholesome,
charitable views of men and things cannot be acquired by vegetating in
one little corner of the earth all one's lifetime." - Mark Twain



On Jun 29, 2018, at 4:23 AM, Ann Byrne
<annakb@...<mailto:annakb@...>> wrote:

If you use f12 for save-as, the backstage view doesn't come up.
At 02:09 AM 6/29/2018, you wrote:
I'm brand new to Office 2016. Can someone explain or point me to
something that explains the backstage view? I could not figure out how
to even save a Word document with that thing enabled. I found a place
in the Word options to hide the backstage view when saving files, but I
do not know if I am giving up some benefit by having it off. Even if it
is hidden during a Save, it seems to still come up when I try to do Save As.

I'm also confused by how the Recent files section seems to have changed
from Office 2010. I heavily relied on Pinned items in my Recent Files
list to access common files. Any guidance?



Robin Van Lant | Sr. Program Manager
Key Equipment Finance | 720-304-1060



This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you
are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information. If
you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether electronic
or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or
redisclose such information for any purpose other than to provide the
services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or
services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional
E-mails' in the SUBJECT line.


moderated Re: backstage view in Office 2016

Richard Turner
 


If you go into the file menu, Options, you can turn off the Backstage view, then you can go back to using control-s to save a document.
It is some visual thing that is useless to screen reader users.
Richard


"Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many of our people need it sorely on these accounts. Broad, wholesome, charitable views of men and things cannot be acquired by vegetating in one little corner of the earth all one's lifetime." - Mark Twain




On Jun 29, 2018, at 4:23 AM, Ann Byrne <annakb@...> wrote:

If you use f12 for save-as, the backstage view doesn't come up.
At 02:09 AM 6/29/2018, you wrote:
I'm brand new to Office 2016.  Can someone explain or point me to something that explains the backstage view?  I could not figure out how to even save a Word document with that thing enabled.  I found a place in the Word options to hide the backstage view when saving files, but I do not know if I am giving up some benefit by having it off.  Even if it is hidden during a Save, it seems to still come up when I try to do Save As.

I'm also confused by how the Recent files section seems to have changed from Office 2010.  I heavily relied on Pinned items in my Recent Files list to access common files.  Any guidance?



Robin Van Lant |  Sr. Program Manager
Key Equipment Finance |  720-304-1060



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.






moderated Re: backstage view in Office 2016

Ann Byrne
 

If you use f12 for save-as, the backstage view doesn't come up.

At 02:09 AM 6/29/2018, you wrote:
I'm brand new to Office 2016. Can someone explain or point me to something that explains the backstage view? I could not figure out how to even save a Word document with that thing enabled. I found a place in the Word options to hide the backstage view when saving files, but I do not know if I am giving up some benefit by having it off. Even if it is hidden during a Save, it seems to still come up when I try to do Save As.

I'm also confused by how the Recent files section seems to have changed from Office 2010. I heavily relied on Pinned items in my Recent Files list to access common files. Any guidance?



Robin Van Lant | Sr. Program Manager
Key Equipment Finance | 720-304-1060



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: Using Monster and Indeed

Jim Fettgather
 

I have noticed a strange occurrence on Indeed.com, which is my favorite job site.
On some machines, when you click on a job search link, the link will open in a new window, revealing all of the job info, and of course, always a way to apply for the job.
On other machines, when you click a job link, you hear absolute silence, nothing.
However, if you scroll down the page, all of the information is there, it is just way further down the page.
I am uncertain why the combination of different browsers yields different results, but I now know that it is at least possible to scroll the page on Indeed.com and find the exact information and all of the details.
Thanks.

-----Original Message-----
From: kevin meyers
Sent: Thursday, June 28, 2018 2:05 PM
To: main@jfw.groups.io
Subject: Re: Using Monster and Indeed

I backed out of Monster.com and started over completely. This time it worked
with shift F10. Thanks!

Kevin Meyers

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Thursday, June 28, 2018 1:13 PM
To: main@jfw.groups.io
Subject: Re: Using Monster and Indeed

try using insert+f7 to get a list of the links on the page. arrow to the one
you want and press enter to activate the link.

you could also try moving to the first character of the link, press the
application key or shift+f10, and if the first choice is open, press enter
to activate it.

-------- Original Message --------
From: kevin meyers [mailto:kman2020@...]
Sent: Thursday, Jun 28, 2018 11:30 AM EST
To: main@jfw.groups.io
Subject: Using Monster and Indeed

Hello,



Prior to upgrading to Windows10 and Jaws2018 I had no problem using
Monster.com and Indeed.com. Now I can get a list of specific jobs. Yet when
I press the enter key or space bar on the link for a particular job nothing
happens. The list of jobs still exist and I cannot activate any of the links
to a job description. What could be causing this problem? Other sites don't
have this problem.



Cheers,



Kevin Meyers


moderated still problems with job search using monster!

David Ingram
 

Hi, how are you list members, here's what I've noticed while performing another job search using monster.com. I found that whether you type music producer like I did or use the word musical producer, you seem to get the same results. I will try musical engineer as was suggested by another list member. I want to thank that list member for that suggestion along with the suggestion to put in musical producer. Just wanted to report something to let you know what the search results turned up. Thank you!