Date   
moderated Re: Groups.iio All List Query

Shirley Tracy
 

Hi Mike,

 

Yes, my email address is where you said. That’s interesting. I never noticed it before, though I don’t think there’s anything too strange about it.

 

Shirley Tracy

 

From: Mike B.
Sent: Wednesday, June 13, 2018 1:22 AM
To: JFW List
Subject: Groups.iio All List Query

 

Hi All,

 

I noticed something today that I've never noticed before at the bottom of any email that I receive from a Groups.io email list / club.  If I go to the bottom of any email, arrow up a couple of times, and right below the unsubscribe link is my email address!

 

Would y'all please check any email you get from any Groups.io list you're a member for what I described above, and let me know if you're seeing your email address at the bottom of each email, or if you're seeing someone elses' email address?

 

All input on this matter will be greatly appreciated!  Thank you very very much!

Take Care.  Mike.  Go Dodgers!
Sent from my iBarstool.

 

moderated Re: Groups.iio All List Query

Andrew Summers
 

Yes mine is there also!
 
Andrew
 

From: Mike B.
Sent: Wednesday, June 13, 2018 6:22 AM
To: JFW List
Subject: Groups.iio All List Query
 
Hi All,
 
I noticed something today that I've never noticed before at the bottom of any email that I receive from a Groups.io email list / club.  If I go to the bottom of any email, arrow up a couple of times, and right below the unsubscribe link is my email address!
 
Would y'all please check any email you get from any Groups.io list you're a member for what I described above, and let me know if you're seeing your email address at the bottom of each email, or if you're seeing someone elses' email address?
 
All input on this matter will be greatly appreciated!  Thank you very very much!
Take Care.  Mike.  Go Dodgers!
Sent from my iBarstool.

moderated Re: Goldwave

Richard Turner
 

Hi Amanda,

In GoldWave, hit f11, that brings up the control properties.
Hit control+tab to get to the device tab.
Then, tab beyond the playback area, though Jaws doesn't speak the group you are in, but listen carefully as you tab and when you hear something about a microphone, you are on the recording device area, which should be a combo box.
Mine says "Loop Back Speakers" which is what you would want for recording system sounds, or anything that comes over the speakers.
I have Windows 10 home, on a Toshiba laptop.
The label for this may be different on other computers.

I hope that helps,
Richard

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Amanda Berkley
Sent: Sunday, June 10, 2018 10:29 AM
To: main@jfw.groups.io
Subject: Goldwave

Can you record system sound with Goldwave?

I'm looking for something that I can record something from iTunes or
Windows Media Player, and the recording will stop when the track ends.
Does this sound like something Goldwave can do?

Does Goldwave play nice with JAWS?

Thanks,
Amanda

































.

moderated Re: Groups.iio All List Query

Carolyn Arnold <4carolyna@...>
 

I am thinking it must be a new list protocol now, since mine
is at the bottom of this one, as well as it showed at the
bottom of messages on another list.

Best regards,

Carolyn

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On
Behalf Of cecropia64
Sent: Wednesday, June 13, 2018 8:20 AM
To: main@jfw.groups.io
Subject: Re: Groups.iio All List Query

My email address is at the bottom as well.� Any reason
why?


On 6/13/2018 1:22 AM, Mike B. wrote:
Hi All,
I noticed something today that I've never noticed before
at the bottom
of any email that I receive from a Groups.io email list /
club.� If
I go to the bottom of any email, arrow up a couple of
times, and right
below the unsubscribe link is my email address!
Would y'all please check any email you get from any
Groups.io list
you're a member for what I described above, and let me
know if you're
seeing your email address at the bottom of each email, or
if you're
seeing someone elses' email address?
All input on this matter will be greatly appreciated!�
Thank you
very very much!
Take Care.� Mike.� Go Dodgers!
Sent from my iBarstool.

moderated Re: Goldwave

Mario
 

I remember it was 300 keystrokes. it's that low to get the user to buy
it. in my opinion, it should be increased to 1000 like Dave suggested or
it should be a cripple free 30 day trial until you register it.

-------- Original Message --------
From: Dave Durber [mailto:d.durber@...]
Sent: Wednesday, Jun 13, 2018 5:29 AM EST
To: main@jfw.groups.io
Subject: Goldwave

If I am not mistaken, when you install Goldwave, you are allowed 1000
keystrokes, before you decide to purchase a license or not.

HTH

Sincerely:

Dave Durber

----- Original Message ----- From: "netbat66" <netbat66@...>
To: <main@jfw.groups.io>
Sent: Tuesday, June 12, 2018 4:18 AM
Subject: Re: Goldwave


i think the trial lets you use it 100 times before you have to pay for it.

-----Original Message----- From: Richard Turner
Sent: Monday, June 11, 2018 7:57 PM
To: main@jfw.groups.io
Subject: Re: Goldwave



GoldWave will work with most Windows versions. What I brought up was
about your
recording Windows sounds, and therefore things you hear over the speakers.
Download GoldWave and read about how to select recording what you hear
in the
manual, and then decide if you want to pay for it. You can use all of its
functions before you pay.
Chances are, you can do what you want.
Best to try it and see.
Richard




"Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many
of our
people need it sorely on these accounts. Broad, wholesome, charitable
views of
men and things cannot be acquired by vegetating in one little corner of the
earth all one's lifetime." - Mark Twain








On Jun 11, 2018, at 7:45 PM, Bill White <billwhite92701@...>
wrote:


Hi, Amanda. Do you know if you have Windows 7 or Windows 10?

Bill White
billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Amanda
Berkley
Sent: Monday, June 11, 2018 6:43 PM
To: main@jfw.groups.io
Subject: Re: Goldwave

Is there a way to know what  version of Windows I have to see if it's
a version that will work with Goldwave?

On 6/10/18, Richard Turner <richardturner42@...> wrote:
Some versions had blocked recording what you hear over the speakers, which
also blocks internet streaming from being recorded, since I have no idea
what version of Windows you are running, I thought it would be helpful to
say that since I could not say absolutely that yes, you can record what you
want with Goldwave.

Perhaps that was simply too much information, but I don't like making
statements too broadly either.

Richard




“The secret is not to make your music louder, but to make the world
quieter.”
- Mitch Albom from The Magic Strings of Frankie Presto, page 1

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Amanda Berkley
Sent: Sunday, June 10, 2018 11:00 AM
To: main@jfw.groups.io
Subject: Re: Goldwave

What do you mean if my version of windows allows it?

I have Windows 10...

On 6/10/18, Richard Turner <richardturner42@...> wrote:
Yes, if your version of Windows allows it.
Goldwave is my all time favorite application for recording.
You will want to read the manual sections about selecting your recording
source.
You also will want the Goldwave scripts for Jaws, in which case it works
very well with Jaws.  Here is the link to the scripts.
https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.jaws-users.com%2Fscripts%2FAudio%2Fgoldwave_5-6_jaws_scripts_2_0.zip&data=02%7C01%7C%7C16c1ac436cd94d6d858108d5cefbec9a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636642503749538223&sdata=I1gYuIwWoqopXbvy3bJh4lLpBoyNBXR76cZ51rG3%2BPY%3D&reserved=0



HTH,
Richard




“The secret is not to make your music louder, but to make the world
quieter.”
- Mitch Albom from The Magic Strings of Frankie Presto, page 1

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Amanda Berkley
Sent: Sunday, June 10, 2018 10:29 AM
To: main@jfw.groups.io
Subject: Goldwave

Can you record system sound with Goldwave?

I'm looking for something that I can record something from iTunes or
Windows Media Player, and the recording will stop when the track ends.
Does this sound like something Goldwave can do?

Does Goldwave play nice with JAWS?

Thanks,
Amanda

































.

moderated Re: Groups.iio All List Query

cecropia64
 

not a problem.� have a good one Mike.


Stew

On 6/13/2018 8:26 AM, Mike B. wrote:
Hi,
Thank you very much for checking your email for me.� I had never seen my email address at the bottom of a Groups.io email until I unsubscribed from all Groups.io with my MB69mach1 account and and then subscribed with my Mike9902 account.� Thanks again for the verification.� I know it's no big deal, but it just struck me as weird after never having seen this before and�having been using Groups.io for several years.
Take Care.� Mike.� Go Dodgers!
Sent from my iBarstool.
----- Original Message -----
*From:* cecropia64 <mailto:cecropia64@...>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:* Wednesday, June 13, 2018 5:20 AM
*Subject:* Re: Groups.iio All List Query

My email address is at the bottom as well.� Any reason why?


On 6/13/2018 1:22 AM, Mike B. wrote:
Hi All,
I noticed something today that I've never noticed before at the bottom
of any email that I receive from a Groups.io email list / club.� If I
go to the bottom of any email, arrow up a couple of times, and right
below the unsubscribe link is my email address!
Would y'all please check any email you get from any Groups.io list
you're a member for what I described above, and let me know if you're
seeing your email address at the bottom of each email, or if you're
seeing someone elses' email address?
All input on this matter will be greatly appreciated!� Thank you very
very much!
Take Care.� Mike.� Go Dodgers!
Sent from my iBarstool.


moderated Re: Groups.iio All List Query

Mike B. <mike9902@...>
 

Hi,
 
Thank you very much for checking your email for me.  I had never seen my email address at the bottom of a Groups.io email until I unsubscribed from all Groups.io with my MB69mach1 account and and then subscribed with my Mike9902 account.  Thanks again for the verification.  I know it's no big deal, but it just struck me as weird after never having seen this before and having been using Groups.io for several years.
Take Care.  Mike.  Go Dodgers!
Sent from my iBarstool.

----- Original Message -----
From: cecropia64
Sent: Wednesday, June 13, 2018 5:20 AM
Subject: Re: Groups.iio All List Query

My email address is at the bottom as well.� Any reason why?


On 6/13/2018 1:22 AM, Mike B. wrote:
> Hi All,
> I noticed something today that I've never noticed before at the bottom
> of any email that I receive from a Groups.io email list / club.� If I
> go to the bottom of any email, arrow up a couple of times, and right
> below the unsubscribe link is my email address!
> Would y'all please check any email you get from any Groups.io list
> you're a member for what I described above, and let me know if you're
> seeing your email address at the bottom of each email, or if you're
> seeing someone elses' email address?
> All input on this matter will be greatly appreciated!� Thank you very
> very much!
> Take Care.� Mike.� Go Dodgers!
> Sent from my iBarstool.
>



moderated Re: Groups.iio All List Query

cecropia64
 

My email address is at the bottom as well.� Any reason why?

On 6/13/2018 1:22 AM, Mike B. wrote:
Hi All,
I noticed something today that I've never noticed before at the bottom of any email that I receive from a Groups.io email list / club.� If I go to the bottom of any email, arrow up a couple of times, and right below the unsubscribe link is my email address!
Would y'all please check any email you get from any Groups.io list you're a member for what I described above, and let me know if you're seeing your email address at the bottom of each email, or if you're seeing someone elses' email address?
All input on this matter will be greatly appreciated!� Thank you very very much!
Take Care.� Mike.� Go Dodgers!
Sent from my iBarstool.

moderated Groups.iio All List Query

Mike B. <mike9902@...>
 

Hi All,
 
I noticed something today that I've never noticed before at the bottom of any email that I receive from a Groups.io email list / club.  If I go to the bottom of any email, arrow up a couple of times, and right below the unsubscribe link is my email address!
 
Would y'all please check any email you get from any Groups.io list you're a member for what I described above, and let me know if you're seeing your email address at the bottom of each email, or if you're seeing someone elses' email address?
 
All input on this matter will be greatly appreciated!  Thank you very very much!
Take Care.  Mike.  Go Dodgers!
Sent from my iBarstool.

moderated Re: Freedom Scientific partners with Computers for the Blind to give the best computing experience to those who need it - Freedom Scientific Blog

Dave Durber
 


Hello Robert:
 
For accurate  pricing for all NFO products, in the USA, call, (800) 444-4443. If you live outside the USA, contact the dealer in your country or, the nearest dealer which covers your country.
 
You can use the following link to locate the nearest dealer to where you live:
 

 
HTH
 
Sincerely:
 
Dave Durber
 
----- Original Message -----
Sent: Tuesday, June 12, 2018 7:41 PM
Subject: Re: Freedom Scientific partners with Computers for the Blind to give the best computing experience to those who need it - Freedom Scientific Blog




On Jun 11, 2018, at 2:15 PM, Cristóbal <crismunoz54@...> wrote:

Hi,

Can someone tell me the price for home use SMa?
Thank you

This is pretty cool. For those of us who already have Jaws, probably not a “big deal”, but still. The more who are able to get access to a quality screen reader, the better.

And yes, I am aware of NVDA.

I’ve helped a VI low-income friend get a machine from this organization in the past. They do good work.

Once you get past the initial purchase of Jaws, if you price out the SMAs, it’s basically a $5.00 monthly subscription anyway.

http://blog.freedomscientific.com/cftb/

moderated Re: Goldwave

Dave Durber
 

If I am not mistaken, when you install Goldwave, you are allowed 1000 keystrokes, before you decide to purchase a license or not.

HTH

Sincerely:

Dave Durber

----- Original Message -----
From: "netbat66" <netbat66@...>
To: <main@jfw.groups.io>
Sent: Tuesday, June 12, 2018 4:18 AM
Subject: Re: Goldwave


i think the trial lets you use it 100 times before you have to pay for it.

-----Original Message-----
From: Richard Turner
Sent: Monday, June 11, 2018 7:57 PM
To: main@jfw.groups.io
Subject: Re: Goldwave



GoldWave will work with most Windows versions. What I brought up was about your
recording Windows sounds, and therefore things you hear over the speakers.
Download GoldWave and read about how to select recording what you hear in the
manual, and then decide if you want to pay for it. You can use all of its
functions before you pay.
Chances are, you can do what you want.
Best to try it and see.
Richard




"Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many of our
people need it sorely on these accounts. Broad, wholesome, charitable views of
men and things cannot be acquired by vegetating in one little corner of the
earth all one's lifetime." - Mark Twain








On Jun 11, 2018, at 7:45 PM, Bill White <billwhite92701@...> wrote:


Hi, Amanda. Do you know if you have Windows 7 or Windows 10?

Bill White
billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Amanda
Berkley
Sent: Monday, June 11, 2018 6:43 PM
To: main@jfw.groups.io
Subject: Re: Goldwave

Is there a way to know what version of Windows I have to see if it's
a version that will work with Goldwave?

On 6/10/18, Richard Turner <richardturner42@...> wrote:
Some versions had blocked recording what you hear over the speakers, which
also blocks internet streaming from being recorded, since I have no idea
what version of Windows you are running, I thought it would be helpful to
say that since I could not say absolutely that yes, you can record what you
want with Goldwave.

Perhaps that was simply too much information, but I don't like making
statements too broadly either.

Richard




“The secret is not to make your music louder, but to make the world
quieter.”
- Mitch Albom from The Magic Strings of Frankie Presto, page 1

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Amanda Berkley
Sent: Sunday, June 10, 2018 11:00 AM
To: main@jfw.groups.io
Subject: Re: Goldwave

What do you mean if my version of windows allows it?

I have Windows 10...

On 6/10/18, Richard Turner <richardturner42@...> wrote:
Yes, if your version of Windows allows it.
Goldwave is my all time favorite application for recording.
You will want to read the manual sections about selecting your recording
source.
You also will want the Goldwave scripts for Jaws, in which case it works
very well with Jaws. Here is the link to the scripts.
https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.jaws-users.com%2Fscripts%2FAudio%2Fgoldwave_5-6_jaws_scripts_2_0.zip&data=02%7C01%7C%7C16c1ac436cd94d6d858108d5cefbec9a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636642503749538223&sdata=I1gYuIwWoqopXbvy3bJh4lLpBoyNBXR76cZ51rG3%2BPY%3D&reserved=0

HTH,
Richard




“The secret is not to make your music louder, but to make the world
quieter.”
- Mitch Albom from The Magic Strings of Frankie Presto, page 1

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Amanda Berkley
Sent: Sunday, June 10, 2018 10:29 AM
To: main@jfw.groups.io
Subject: Goldwave

Can you record system sound with Goldwave?

I'm looking for something that I can record something from iTunes or
Windows Media Player, and the recording will stop when the track ends.
Does this sound like something Goldwave can do?

Does Goldwave play nice with JAWS?

Thanks,
Amanda

moderated jaws with visited links with firefox and i e

netbat66
 

hi,
is there a setting i can change so jaws 2018 will nnounce visited links before the link, instead of after the link?
i am tired of haveing to listen to the entire link description before it will tell me it has been visited before i go to the next link.
like when useing a google search.
thanks.

moderated Re: Goldwave

Mario
 

Amanda, once you have the scripts saved to the hard drive, locate the
.zip file (archive), press enter to open it, select the files you will
need (I don't think you'll need any of the Goldwave4 files), and copy
the files by pressing control+c or cut by pressing control+x.
now for part 2:

* if you are using Windows 10, the scripts will need to go in the
appropriate location following these steps:

• press the Windows key and up arrow to all apps, checked.
• once JAWS announces suggested, type j to get to the JAWS folder of
which version you're using. for example JAWS 2018.
• press the space bar, down arrow to Utilities and press the enter key.
• down arrow to Explore My Settings and press the enter key.
• now press control+v to paste the scripts you had copied or cut
previously. you can press alt+f4 because your done.

* if you are using Windows 7, the scripts will need to go in the
appropriate location following these steps:

• press the Windows key, up arrow to all programs, right arrow once and
down arrow twice.
• type j until you get to the JAWS folder according to the version you
are using. for example JAWS 2018.
• right arrow and type e to get to the Explore settings.
• right arrow, down arrow twice to Explore My Settings and press enter.
• now press control+v to paste the scripts you had copied or cut
previously. you can press alt+f4 because your done.

* you can check if the scripts are loading by pressing insert+q after
starting Goldwave. if JAWS announces that the Goldwave settings are
loaded, that's great! mission accomplished.

-------- Original Message --------
From: Richard Turner [mailto:richardturner42@...]
Sent: Tuesday, Jun 12, 2018 7:31 PM EST
To: main@jfw.groups.io
Subject: Goldwave


Did you read anything in the manual? You have to select a different
recording source.
If I have time later, when I'm on my computer, I will get the steps for
you, but you could probably figure it out faster with the manual.
As for the scripts, I am not an expert with them by any means.
People have posted steps on here before.
I wish I could help more quickly.
Richard



"Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many
of our people need it sorely on these accounts. Broad, wholesome,
charitable views of men and things cannot be acquired by vegetating in
one little corner of the earth all one's lifetime." - Mark Twain



On Jun 12, 2018, at 4:17 PM, Amanda Berkley
<amanda1226@...<mailto:amanda1226@...>> wrote:

Well, I tried to record a sample track with Goldwave, but it's
recording microphone sound, not system sound and I didn't see an
option to select just system sound in the preferences. Also, how do
you install JAWS scripts? I'm not sure if I did that correctly since
I've never done scripts before.

Thanks,
Amanda

On 6/12/18, Bill White
<billwhite92701@...<mailto:billwhite92701@...>> wrote:
Hi, Amanda. There isn’t one particular build of Windows 10 that you need.
Besides, eventually, everyone will need to update their version of Windows
10.

Bill White
billwhite92701@...<mailto:billwhite92701@...>

From: main@jfw.groups.io<mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Amanda
Berkley
Sent: Tuesday, June 12, 2018 10:56 AM
To: main@jfw.groups.io<mailto:main@jfw.groups.io>
Subject: Re: Goldwave

Is there a certain build number that I am looking forward to know if I have
the right version of windows?


Amanda

On Jun 12, 2018, at 8:31 AM, Bill White
<billwhite92701@...<mailto:billwhite92701@...>>
wrote:
Hi, Amanda. In Windows 10, try the following to get the exact windows
version and build:

Press Windows key plus the letter R

When the “Run” dialog appears, type:

winver

Your screen reader will speak the exact Windows version and build.

Bill White
billwhite92701@...<mailto:billwhite92701@...>

From: main@jfw.groups.io<mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Amanda
Berkley
Sent: Tuesday, June 12, 2018 6:08 AM
To: main@jfw.groups.io<mailto:main@jfw.groups.io>
Subject: Re: Goldwave

I have Windows 10.
I’ll download it and give it a try.
Thanks!
Amanda

On Jun 11, 2018, at 9:45 PM, Bill White
<billwhite92701@...<mailto:billwhite92701@...>>
wrote:
Hi, Amanda. Do you know if you have Windows 7 or Windows 10?

Bill White
billwhite92701@...<mailto:billwhite92701@...>

-----Original Message-----
From: main@jfw.groups.io<mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Amanda
Berkley
Sent: Monday, June 11, 2018 6:43 PM
To: main@jfw.groups.io<mailto:main@jfw.groups.io>
Subject: Re: Goldwave

Is there a way to know what version of Windows I have to see if it's
a version that will work with Goldwave?

On 6/10/18, Richard Turner
<richardturner42@...<mailto:richardturner42@...>> wrote:


Some versions had blocked recording what you hear over the speakers, which
also blocks internet streaming from being recorded, since I have no idea
what version of Windows you are running, I thought it would be helpful to
say that since I could not say absolutely that yes, you can record what you
want with Goldwave.

Perhaps that was simply too much information, but I don't like making
statements too broadly either.

Richard




“The secret is not to make your music louder, but to make the world
quieter.”
- Mitch Albom from The Magic Strings of Frankie Presto, page 1

-----Original Message-----
From: main@jfw.groups.io<mailto:main@jfw.groups.io>
<main@jfw.groups.io<mailto:main@jfw.groups.io>> On Behalf Of Amanda Berkley
Sent: Sunday, June 10, 2018 11:00 AM
To: main@jfw.groups.io<mailto:main@jfw.groups.io>
<mailto:main@jfw.groups.io>
Subject: Re: Goldwave

What do you mean if my version of windows allows it?

I have Windows 10...

On 6/10/18, Richard Turner
<richardturner42@...<mailto:richardturner42@...>> wrote:
Yes, if your version of Windows allows it.
Goldwave is my all time favorite application for recording.
You will want to read the manual sections about selecting your recording
source.
You also will want the Goldwave scripts for Jaws, in which case it works
very well with Jaws. Here is the link to the scripts.
https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.jaws-users.com%2Fscripts%2FAudio%2Fgoldwave_5-6_jaws_scripts_2_0.zip
<https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.jaws-users.com%2Fscripts%2FAudio%2Fgoldwave_5-6_jaws_scripts_2_0.zip&data=02%7C01%7C%7C16c1ac436cd94d6d858108d5cefbec9a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636642503749538223&sdata=I1gYuIwWoqopXbvy3bJh4lLpBoyNBXR76cZ51rG3%2BPY%3D&reserved=0>
&data=02%7C01%7C%7C16c1ac436cd94d6d858108d5cefbec9a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636642503749538223&sdata=I1gYuIwWoqopXbvy3bJh4lLpBoyNBXR76cZ51rG3%2BPY%3D&reserved=0

HTH,
Richard




“The secret is not to make your music louder, but to make the world
quieter.”
- Mitch Albom from The Magic Strings of Frankie Presto, page 1

-----Original Message-----
From: main@jfw.groups.io<mailto:main@jfw.groups.io>
<main@jfw.groups.io<mailto:main@jfw.groups.io>> On Behalf Of Amanda Berkley
Sent: Sunday, June 10, 2018 10:29 AM
To: main@jfw.groups.io<mailto:main@jfw.groups.io>
Subject: Goldwave

Can you record system sound with Goldwave?

I'm looking for something that I can record something from iTunes or
Windows Media Player, and the recording will stop when the track ends.
Does this sound like something Goldwave can do?

Does Goldwave play nice with JAWS?

Thanks,
Amanda

moderated Re: Opening a link in a new tab from the "List of Links" dialog

Nermin
 

Hi Brian,
 
I doubt you can use this JAWS feature. I would suspect that JAWS somehow pulls the list from the HTML content or the browser’s API, so it renders the links in a list to which you only have access once you press JAWS-Key+F7. FS would need to find a way of opening a link from here in a new tab through a script, but no idea if such things can be acomplished.
 
I will ask around though, but I’d think this would require a lot of scripting and fiddling around and would need to be done for each user separately.
 
Regards,
Nermin

moderated Re: Goldwave

Richard Turner
 


Did you read anything in the manual? You have to select a different recording source.
If I have time later, when I'm on my computer, I will get the steps for you, but you could probably figure it out faster with the manual. 
As for the scripts, I am not an expert with them by any means.
People have posted steps on here before.
I wish I could help more quickly.
Richard


"Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many of our people need it sorely on these accounts. Broad, wholesome, charitable views of men and things cannot be acquired by vegetating in one little corner of the earth all one's lifetime." - Mark Twain




On Jun 12, 2018, at 4:17 PM, Amanda Berkley <amanda1226@...> wrote:

Well, I tried to record a sample track with Goldwave, but it's
recording microphone sound, not system sound and I didn't see an
option to select just system sound in the preferences. Also, how do
you install JAWS scripts? I'm not sure if I did that correctly since
I've never done scripts before.

Thanks,
Amanda

On 6/12/18, Bill White <billwhite92701@...> wrote:
Hi, Amanda. There isn’t one particular build of Windows 10 that you need.
Besides, eventually, everyone will need to update their version of Windows
10.

Bill White
billwhite92701@...

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Amanda
Berkley
Sent: Tuesday, June 12, 2018 10:56 AM
To: main@jfw.groups.io
Subject: Re: Goldwave

Is there a certain build number that I am looking forward to know if I have
the right version of windows?


Amanda

On Jun 12, 2018, at 8:31 AM, Bill White <billwhite92701@...>
wrote:
Hi, Amanda. In Windows 10, try the following to get the exact windows
version and build:

Press Windows key plus the letter R

When the “Run” dialog appears, type:

winver

Your screen reader will speak the exact Windows version and build.

Bill White
billwhite92701@...

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Amanda
Berkley
Sent: Tuesday, June 12, 2018 6:08 AM
To: main@jfw.groups.io
Subject: Re: Goldwave

I have Windows 10.
I’ll download it and give it a try.
Thanks!
Amanda

On Jun 11, 2018, at 9:45 PM, Bill White <billwhite92701@...>
wrote:
Hi, Amanda. Do you know if you have Windows 7 or Windows 10?

Bill White
billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Amanda
Berkley
Sent: Monday, June 11, 2018 6:43 PM
To: main@jfw.groups.io
Subject: Re: Goldwave

Is there a way to know what  version of Windows I have to see if it's
a version that will work with Goldwave?

On 6/10/18, Richard Turner <richardturner42@...> wrote:


Some versions had blocked recording what you hear over the speakers, which
also blocks internet streaming from being recorded, since I have no idea
what version of Windows you are running, I thought it would be helpful to
say that since I could not say absolutely that yes, you can record what you
want with Goldwave.

Perhaps that was simply too much information, but I don't like making
statements too broadly either.

Richard




“The secret is not to make your music louder, but to make the world
quieter.”
- Mitch Albom from The Magic Strings of Frankie Presto, page 1

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Amanda Berkley
Sent: Sunday, June 10, 2018 11:00 AM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: Goldwave

What do you mean if my version of windows allows it?

I have Windows 10...

On 6/10/18, Richard Turner <richardturner42@...> wrote:
Yes, if your version of Windows allows it.
Goldwave is my all time favorite application for recording.
You will want to read the manual sections about selecting your recording
source.
You also will want the Goldwave scripts for Jaws, in which case it works
very well with Jaws.  Here is the link to the scripts.
https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.jaws-users.com%2Fscripts%2FAudio%2Fgoldwave_5-6_jaws_scripts_2_0.zip
<https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.jaws-users.com%2Fscripts%2FAudio%2Fgoldwave_5-6_jaws_scripts_2_0.zip&data=02%7C01%7C%7C16c1ac436cd94d6d858108d5cefbec9a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636642503749538223&sdata=I1gYuIwWoqopXbvy3bJh4lLpBoyNBXR76cZ51rG3%2BPY%3D&reserved=0>
&data=02%7C01%7C%7C16c1ac436cd94d6d858108d5cefbec9a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636642503749538223&sdata=I1gYuIwWoqopXbvy3bJh4lLpBoyNBXR76cZ51rG3%2BPY%3D&reserved=0

HTH,
Richard




“The secret is not to make your music louder, but to make the world
quieter.”
- Mitch Albom from The Magic Strings of Frankie Presto, page 1

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Amanda Berkley
Sent: Sunday, June 10, 2018 10:29 AM
To: main@jfw.groups.io
Subject: Goldwave

Can you record system sound with Goldwave?

I'm looking for something that I can record something from iTunes or
Windows Media Player, and the recording will stop when the track ends.
Does this sound like something Goldwave can do?

Does Goldwave play nice with JAWS?

Thanks,
Amanda































moderated Re: Goldwave

Bill White
 

I don't have Goldwave, so I cannot tell you where, in the settings, this option would be. I'm sure it's in there, though. Most professional recording apps have this option.

Bill White
billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Amanda Berkley
Sent: Tuesday, June 12, 2018 4:17 PM
To: main@jfw.groups.io
Subject: Re: Goldwave

Well, I tried to record a sample track with Goldwave, but it's
recording microphone sound, not system sound and I didn't see an
option to select just system sound in the preferences. Also, how do
you install JAWS scripts? I'm not sure if I did that correctly since
I've never done scripts before.

Thanks,
Amanda

On 6/12/18, Bill White <billwhite92701@...> wrote:
Hi, Amanda. There isn’t one particular build of Windows 10 that you need.
Besides, eventually, everyone will need to update their version of Windows
10.

Bill White
billwhite92701@...

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Amanda
Berkley
Sent: Tuesday, June 12, 2018 10:56 AM
To: main@jfw.groups.io
Subject: Re: Goldwave

Is there a certain build number that I am looking forward to know if I have
the right version of windows?


Amanda

On Jun 12, 2018, at 8:31 AM, Bill White <billwhite92701@...>
wrote:
Hi, Amanda. In Windows 10, try the following to get the exact windows
version and build:

Press Windows key plus the letter R

When the “Run” dialog appears, type:

winver

Your screen reader will speak the exact Windows version and build.

Bill White
billwhite92701@...

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Amanda
Berkley
Sent: Tuesday, June 12, 2018 6:08 AM
To: main@jfw.groups.io
Subject: Re: Goldwave

I have Windows 10.
I’ll download it and give it a try.
Thanks!
Amanda

On Jun 11, 2018, at 9:45 PM, Bill White <billwhite92701@...>
wrote:
Hi, Amanda. Do you know if you have Windows 7 or Windows 10?

Bill White
billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Amanda
Berkley
Sent: Monday, June 11, 2018 6:43 PM
To: main@jfw.groups.io
Subject: Re: Goldwave

Is there a way to know what version of Windows I have to see if it's
a version that will work with Goldwave?

On 6/10/18, Richard Turner <richardturner42@...> wrote:


Some versions had blocked recording what you hear over the speakers, which
also blocks internet streaming from being recorded, since I have no idea
what version of Windows you are running, I thought it would be helpful to
say that since I could not say absolutely that yes, you can record what you
want with Goldwave.

Perhaps that was simply too much information, but I don't like making
statements too broadly either.

Richard




“The secret is not to make your music louder, but to make the world
quieter.”
- Mitch Albom from The Magic Strings of Frankie Presto, page 1

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Amanda Berkley
Sent: Sunday, June 10, 2018 11:00 AM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: Goldwave

What do you mean if my version of windows allows it?

I have Windows 10...

On 6/10/18, Richard Turner <richardturner42@...> wrote:
Yes, if your version of Windows allows it.
Goldwave is my all time favorite application for recording.
You will want to read the manual sections about selecting your recording
source.
You also will want the Goldwave scripts for Jaws, in which case it works
very well with Jaws. Here is the link to the scripts.
https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.jaws-users.com%2Fscripts%2FAudio%2Fgoldwave_5-6_jaws_scripts_2_0.zip
<https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.jaws-users.com%2Fscripts%2FAudio%2Fgoldwave_5-6_jaws_scripts_2_0.zip&data=02%7C01%7C%7C16c1ac436cd94d6d858108d5cefbec9a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636642503749538223&sdata=I1gYuIwWoqopXbvy3bJh4lLpBoyNBXR76cZ51rG3%2BPY%3D&reserved=0>
&data=02%7C01%7C%7C16c1ac436cd94d6d858108d5cefbec9a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636642503749538223&sdata=I1gYuIwWoqopXbvy3bJh4lLpBoyNBXR76cZ51rG3%2BPY%3D&reserved=0

HTH,
Richard




“The secret is not to make your music louder, but to make the world
quieter.”
- Mitch Albom from The Magic Strings of Frankie Presto, page 1

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Amanda Berkley
Sent: Sunday, June 10, 2018 10:29 AM
To: main@jfw.groups.io
Subject: Goldwave

Can you record system sound with Goldwave?

I'm looking for something that I can record something from iTunes or
Windows Media Player, and the recording will stop when the track ends.
Does this sound like something Goldwave can do?

Does Goldwave play nice with JAWS?

Thanks,
Amanda



























moderated Re: Goldwave

Amanda Berkley
 

Well, I tried to record a sample track with Goldwave, but it's
recording microphone sound, not system sound and I didn't see an
option to select just system sound in the preferences. Also, how do
you install JAWS scripts? I'm not sure if I did that correctly since
I've never done scripts before.

Thanks,
Amanda

On 6/12/18, Bill White <billwhite92701@...> wrote:
Hi, Amanda. There isn’t one particular build of Windows 10 that you need.
Besides, eventually, everyone will need to update their version of Windows
10.

Bill White
billwhite92701@...

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Amanda
Berkley
Sent: Tuesday, June 12, 2018 10:56 AM
To: main@jfw.groups.io
Subject: Re: Goldwave

Is there a certain build number that I am looking forward to know if I have
the right version of windows?


Amanda

On Jun 12, 2018, at 8:31 AM, Bill White <billwhite92701@...>
wrote:
Hi, Amanda. In Windows 10, try the following to get the exact windows
version and build:

Press Windows key plus the letter R

When the “Run” dialog appears, type:

winver

Your screen reader will speak the exact Windows version and build.

Bill White
billwhite92701@...

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Amanda
Berkley
Sent: Tuesday, June 12, 2018 6:08 AM
To: main@jfw.groups.io
Subject: Re: Goldwave

I have Windows 10.
I’ll download it and give it a try.
Thanks!
Amanda

On Jun 11, 2018, at 9:45 PM, Bill White <billwhite92701@...>
wrote:
Hi, Amanda. Do you know if you have Windows 7 or Windows 10?

Bill White
billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Amanda
Berkley
Sent: Monday, June 11, 2018 6:43 PM
To: main@jfw.groups.io
Subject: Re: Goldwave

Is there a way to know what version of Windows I have to see if it's
a version that will work with Goldwave?

On 6/10/18, Richard Turner <richardturner42@...> wrote:


Some versions had blocked recording what you hear over the speakers, which
also blocks internet streaming from being recorded, since I have no idea
what version of Windows you are running, I thought it would be helpful to
say that since I could not say absolutely that yes, you can record what you
want with Goldwave.

Perhaps that was simply too much information, but I don't like making
statements too broadly either.

Richard




“The secret is not to make your music louder, but to make the world
quieter.”
- Mitch Albom from The Magic Strings of Frankie Presto, page 1

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Amanda Berkley
Sent: Sunday, June 10, 2018 11:00 AM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: Goldwave

What do you mean if my version of windows allows it?

I have Windows 10...

On 6/10/18, Richard Turner <richardturner42@...> wrote:
Yes, if your version of Windows allows it.
Goldwave is my all time favorite application for recording.
You will want to read the manual sections about selecting your recording
source.
You also will want the Goldwave scripts for Jaws, in which case it works
very well with Jaws. Here is the link to the scripts.
https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.jaws-users.com%2Fscripts%2FAudio%2Fgoldwave_5-6_jaws_scripts_2_0.zip
<https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.jaws-users.com%2Fscripts%2FAudio%2Fgoldwave_5-6_jaws_scripts_2_0.zip&data=02%7C01%7C%7C16c1ac436cd94d6d858108d5cefbec9a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636642503749538223&sdata=I1gYuIwWoqopXbvy3bJh4lLpBoyNBXR76cZ51rG3%2BPY%3D&reserved=0>
&data=02%7C01%7C%7C16c1ac436cd94d6d858108d5cefbec9a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636642503749538223&sdata=I1gYuIwWoqopXbvy3bJh4lLpBoyNBXR76cZ51rG3%2BPY%3D&reserved=0

HTH,
Richard




“The secret is not to make your music louder, but to make the world
quieter.”
- Mitch Albom from The Magic Strings of Frankie Presto, page 1

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Amanda Berkley
Sent: Sunday, June 10, 2018 10:29 AM
To: main@jfw.groups.io
Subject: Goldwave

Can you record system sound with Goldwave?

I'm looking for something that I can record something from iTunes or
Windows Media Player, and the recording will stop when the track ends.
Does this sound like something Goldwave can do?

Does Goldwave play nice with JAWS?

Thanks,
Amanda



























moderated Re: Firefox Quantum, Version 60, and getting to browser control buttons

Cristóbal
 

I was about to mention Marco as well. He’s a really good resource on all things accessible with a focus on Firefox. If memory serves though, he’s mainly an NVDA user now. He was helping me out with some Jaws and Firefox issues I was having last week.

Friendly and very knowledgeable.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Brian Vogel
Sent: Tuesday, June 12, 2018 12:53 PM
To: main@jfw.groups.io
Subject: Re: Firefox Quantum, Version 60, and getting to browser control buttons

 

Nermin,

         I was completely unaware of this blog and the individual who writes it and I cannot begin to thank you enough for the pointer to him.

         I have written him to find out if what I want to do is possible at this time and, if not, whether a fix is currently in the works.

--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

     Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many of our people need it sorely on these accounts. Broad, wholesome, charitable views of men and things cannot be acquired by vegetating in one little corner of the earth all one's lifetime.

         ~ Mark Twain

moderated Re: Goldwave

Bill White
 

Hi, Amanda. There isn’t one particular build of Windows 10 that you need. Besides, eventually, everyone will need to update their version of Windows 10.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Amanda Berkley
Sent: Tuesday, June 12, 2018 10:56 AM
To: main@jfw.groups.io
Subject: Re: Goldwave

 

Is there a certain build number that I am looking forward to know if I have the right version of windows?

 

 

Amanda 


On Jun 12, 2018, at 8:31 AM, Bill White <billwhite92701@...> wrote:

Hi, Amanda. In Windows 10, try the following to get the exact windows version and build:

 

Press Windows key plus the letter R

 

When the “Run” dialog appears, type:

 

winver

 

Your screen reader will speak the exact Windows version and build.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Amanda Berkley
Sent: Tuesday, June 12, 2018 6:08 AM
To: main@jfw.groups.io
Subject: Re: Goldwave

 

I have Windows 10.

I’ll download it and give it a try.

Thanks!

Amanda 


On Jun 11, 2018, at 9:45 PM, Bill White <billwhite92701@...> wrote:

Hi, Amanda. Do you know if you have Windows 7 or Windows 10?

Bill White
billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Amanda Berkley
Sent: Monday, June 11, 2018 6:43 PM
To: main@jfw.groups.io
Subject: Re: Goldwave

Is there a way to know what  version of Windows I have to see if it's
a version that will work with Goldwave?

On 6/10/18, Richard Turner <richardturner42@...> wrote:

Some versions had blocked recording what you hear over the speakers, which

also blocks internet streaming from being recorded, since I have no idea

what version of Windows you are running, I thought it would be helpful to

say that since I could not say absolutely that yes, you can record what you

want with Goldwave.

 

Perhaps that was simply too much information, but I don't like making

statements too broadly either.

 

Richard

 

 

 

 

“The secret is not to make your music louder, but to make the world

quieter.”

- Mitch Albom from The Magic Strings of Frankie Presto, page 1

 

-----Original Message-----

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Amanda Berkley

Sent: Sunday, June 10, 2018 11:00 AM

To: main@jfw.groups.io

Subject: Re: Goldwave

 

What do you mean if my version of windows allows it?

 

I have Windows 10...

 

On 6/10/18, Richard Turner <richardturner42@...> wrote:

Yes, if your version of Windows allows it.

Goldwave is my all time favorite application for recording.

You will want to read the manual sections about selecting your recording

source.

You also will want the Goldwave scripts for Jaws, in which case it works

very well with Jaws.  Here is the link to the scripts.

https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.jaws-users.com%2Fscripts%2FAudio%2Fgoldwave_5-6_jaws_scripts_2_0.zip&data=02%7C01%7C%7C16c1ac436cd94d6d858108d5cefbec9a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636642503749538223&sdata=I1gYuIwWoqopXbvy3bJh4lLpBoyNBXR76cZ51rG3%2BPY%3D&reserved=0

 

HTH,

Richard

 

 

 

 

“The secret is not to make your music louder, but to make the world

quieter.”

- Mitch Albom from The Magic Strings of Frankie Presto, page 1

 

-----Original Message-----

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Amanda Berkley

Sent: Sunday, June 10, 2018 10:29 AM

To: main@jfw.groups.io

Subject: Goldwave

 

Can you record system sound with Goldwave?

 

I'm looking for something that I can record something from iTunes or

Windows Media Player, and the recording will stop when the track ends.

Does this sound like something Goldwave can do?

 

Does Goldwave play nice with JAWS?

 

Thanks,

Amanda

 

 

 

 

 

 

 

 

 

 

 

 

 

 









moderated Re: Opening a link in a new tab from the "List of Links" dialog

 

Gerry,

          Thanks, but I am well aware of that setting and it's already set to open links in tabs instead of windows, but that only applies to links "passed in to" the browser, e.g., from the e-mail client or a desktop HTML shortcut, not links activated from webpages one is viewing.  On webpages one is viewing, provided one is not in the List of Links dialog, activating a link via Enter will replace the content of the current tab and via CTRL+Enter will open it in a separate tab.   All links directly activated from the List of Links dialog are exhibiting the former behavior and there appears to be no modifier key that can be used in conjunction with the "Activate this link" button to make it open in a new tab.

          Try it out, you'll see the behavior for yourself.

--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

     Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many of our people need it sorely on these accounts. Broad, wholesome, charitable views of men and things cannot be acquired by vegetating in one little corner of the earth all one's lifetime.

         ~ Mark Twain