Date   

Re: [Bulk] Just installed JAWS 13

Dave...
 

David,

While that may well be one situation, in my case it was an XP Pro machine
with JAWS 9 and 11 installed. Installing JAWS 12 resulted in the same
problem as experienced by Dondi. However the remedy was not to continue to
burn off keys, as it didn't matter. I recall that JAWS 12 responded with
already being activated, but on a subsequent reboot, the same problem arose.

FS support came up with the remedy that involved either my JAWS 9 or JAWS
11, but not sure which. Once I did that, the problem never came back, even
when I later installed JAWS 13.

So again in my case it was an XP machine and not Windows 7.

I think that Donny Harris' suggestion for a manual activation may be similar
to what I needed to do, but not sure -- henceforth my suggestion for Dondi
to refer to FS support for help.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "David" <davidwhitehead1957@cogeco.ca>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Thursday, December 22, 2011 08:12
Subject: [Bulk] RE: Just installed JAWS 13


Hello there;

As I mentioned in a message quite a while back,
If you've gone to fs activate.com,
And you've verified that you have keys available,
Then?
Perhaps if your using windows 7,
The uac, "user account control" is stopping/blocking
The activation process.
I've experienced this behavior with a couple of my clients computers.
So, I turned off the UAC,
Went through the activation process,
And everything worked well,
Then I went back and turned on the UAC.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Lisle, Ted (CHFS DMS)
Sent: Thursday, December 22, 2011 7:44 AM
To: The Jaws for Windows support list.
Subject: RE: Just installed JAWS 13

Which version? The version on the disk preceded the fix, which, I believe,
came in the November maintenance release. I worked a tandem with FS back on
November 8 to get mine in.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Dondi
Sent: Wednesday, December 21, 2011 10:42 PM
To: JAWS mailing list
Subject: Just installed JAWS 13

Hi everyone,



I have just installed JAWS 13 but I am having a bit of a problem. JAWS
13
says "Your current authorization is for an earlier version of this Freedom
Scientific product". If I continue and do the whole internet registration
activation it says the activation was successful and JAWS needs to restart
but when I restart JAWS it just continues saying the same thing. I thought
when you installed the new version of JAWS that it would just use the
registration code of JAWS 12? Anybody have any ideas?



Dondi

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20
111221/dd2d4af3/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Just installed JAWS 13

David <davidwhitehead1957@...>
 

Hello there;

As I mentioned in a message quite a while back,
If you've gone to fs activate.com,
And you've verified that you have keys available,
Then?
Perhaps if your using windows 7,
The uac, "user account control" is stopping/blocking
The activation process.
I've experienced this behavior with a couple of my clients computers.
So, I turned off the UAC,
Went through the activation process,
And everything worked well,
Then I went back and turned on the UAC.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Lisle, Ted (CHFS DMS)
Sent: Thursday, December 22, 2011 7:44 AM
To: The Jaws for Windows support list.
Subject: RE: Just installed JAWS 13

Which version? The version on the disk preceded the fix, which, I believe,
came in the November maintenance release. I worked a tandem with FS back on
November 8 to get mine in.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Dondi
Sent: Wednesday, December 21, 2011 10:42 PM
To: JAWS mailing list
Subject: Just installed JAWS 13

Hi everyone,



I have just installed JAWS 13 but I am having a bit of a problem. JAWS
13
says "Your current authorization is for an earlier version of this Freedom
Scientific product". If I continue and do the whole internet registration
activation it says the activation was successful and JAWS needs to restart
but when I restart JAWS it just continues saying the same thing. I thought
when you installed the new version of JAWS that it would just use the
registration code of JAWS 12? Anybody have any ideas?



Dondi

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20
111221/dd2d4af3/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Just installed JAWS 13

donnie harris <harris.donnie@...>
 

I had the same problem and I have had the same problem for the last 2 or 3
years. So here is what I do to activate1. I choose to activate by phone,
that is one of the options if you arrow down when you hear (activate via the
internet)
2. You will need to choose configure manually.
3. You will need 3 numbers, a 30 digit number called the 30 digit serial
number, also called your 30 digit activaction code)
4 your 20 digit authorization number.activation number.
5. Your locking code. You can find your locking code in the help section
under about Jaws. You will have to route your Jaws to your p c curser.
For the 30 and the 20 digit numbers you will need to call F.S. with your
normal serial number and they can give you these other numbers.
I think that my fire wall is preventing this from doing it's job and have
learned to do this, it isn't hard at all.
Good luck, Donnie Harris.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Dondi
Sent: Wednesday, December 21, 2011 9:42 PM
To: JAWS mailing list
Subject: Just installed JAWS 13

Hi everyone,



I have just installed JAWS 13 but I am having a bit of a problem. JAWS 13
says "Your current authorization is for an earlier version of this Freedom
Scientific product". If I continue and do the whole internet registration
activation it says the activation was successful and JAWS needs to restart
but when I restart JAWS it just continues saying the same thing. I thought
when you installed the new version of JAWS that it would just use the
registration code of JAWS 12? Anybody have any ideas?



Dondi

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201112
21/dd2d4af3/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Just installed JAWS 13

Lisle, Ted (CHFS DMS)
 

Which version? The version on the disk preceded the fix, which, I
believe, came in the November maintenance release. I worked a tandem
with FS back on November 8 to get mine in.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Dondi
Sent: Wednesday, December 21, 2011 10:42 PM
To: JAWS mailing list
Subject: Just installed JAWS 13

Hi everyone,



I have just installed JAWS 13 but I am having a bit of a problem. JAWS
13
says "Your current authorization is for an earlier version of this
Freedom
Scientific product". If I continue and do the whole internet
registration
activation it says the activation was successful and JAWS needs to
restart
but when I restart JAWS it just continues saying the same thing. I
thought
when you installed the new version of JAWS that it would just use the
registration code of JAWS 12? Anybody have any ideas?



Dondi

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20
111221/dd2d4af3/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Just installed JAWS 13

Dondi
 

Chris,

I'll tell you anyway if you are interested. I went to Freedom Scientific and
checked and their web page said I'm authorized for two upgrades. But I'll
call them in the morning and see what they have to say.

Dondi

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Chris Smart
Sent: Wednesday, December 21, 2011 9:48 PM
To: The Jaws for Windows support list.
Subject: Re: Just installed JAWS 13

forget my reply, Dave probably has it correct. *grin*
--------------------------------------------------
CTS MASTERING: PROFESSIONAL MIXING AND MASTERING! Clear True Sound:
www.ctsmastering.com --

Always have your stuff when you need it with @Dropbox. Seamlessly share with
your friends and colleagues. 2GB account is free!
http://db.tt/bQ2GuIt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Just installed JAWS 13

Chris Smart <csmart8@...>
 

forget my reply, Dave probably has it correct. *grin*
--------------------------------------------------
CTS MASTERING: PROFESSIONAL MIXING AND MASTERING! Clear True Sound: www.ctsmastering.com --

Always have your stuff when you need it with @Dropbox. Seamlessly share with your friends and colleagues. 2GB account is free! http://db.tt/bQ2GuIt


Re: Just installed JAWS 13

Chris Smart <csmart8@...>
 

Dondi, were you authorized for the upgrade? What's the status of your SMA?
--------------------------------------------------
CTS MASTERING: PROFESSIONAL MIXING AND MASTERING! Clear True Sound: www.ctsmastering.com --

Always have your stuff when you need it with @Dropbox. Seamlessly share with your friends and colleagues. 2GB account is free! http://db.tt/bQ2GuIt


Re: [Bulk] Just installed JAWS 13

Dave...
 

Dondi,

Call FS. I had the same problem several months ago and the solution involved
reactivating a prior version of JAWS first. They can help you right away.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "Dondi" <zidnod63@gmail.com>
To: "JAWS mailing list" <jfw@lists.the-jdh.com>
Sent: Wednesday, December 21, 2011 19:41
Subject: [Bulk] Just installed JAWS 13


Hi everyone,



I have just installed JAWS 13 but I am having a bit of a problem. JAWS 13
says "Your current authorization is for an earlier version of this Freedom
Scientific product". If I continue and do the whole internet registration
activation it says the activation was successful and JAWS needs to restart
but when I restart JAWS it just continues saying the same thing. I thought
when you installed the new version of JAWS that it would just use the
registration code of JAWS 12? Anybody have any ideas?



Dondi

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111221/dd2d4af3/attachment.html>;
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Just installed JAWS 13

Dondi
 

Hi everyone,



I have just installed JAWS 13 but I am having a bit of a problem. JAWS 13
says "Your current authorization is for an earlier version of this Freedom
Scientific product". If I continue and do the whole internet registration
activation it says the activation was successful and JAWS needs to restart
but when I restart JAWS it just continues saying the same thing. I thought
when you installed the new version of JAWS that it would just use the
registration code of JAWS 12? Anybody have any ideas?



Dondi

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111221/dd2d4af3/attachment.html>;


Re: JFW 12 and Adobe Reader 10.1

Bergen, Eric <Eric.Bergen@...>
 

You are very welcome.
It was a tip that I picked up on this list and I still appreciate it.
Eric.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Sharon Clark
Sent: Wednesday, December 21, 2011 2:31 PM
To: 'The Jaws for Windows support list.'
Subject: RE: JFW 12 and Adobe Reader 10.1

Hello Eric,

Thank you so much! This worked! Now my student can read PDF documents.

Thanks Again,
Sharon

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Bergen, Eric
Sent: Monday, December 19, 2011 4:59 PM
To: 'The Jaws for Windows support list.'
Subject: RE: JFW 12 and Adobe Reader 10.1

Hi.
I am not sure if this will make a difference but try this.
Go to your start menu and open Adobe Reader.
Go to your edit menu and click on preferences.
Find General in the list and hit tab.
Keep tabbing until you find enable protected mode at startup and make sure it is unchecked.
Tab to ok and hit enter.
This is what I did and I was able to read PDF documents after that.
As long as it is not a scanned document. In this case you will need OCR.
Hope this helps.
Eric.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Sharon Clark
Sent: Monday, December 19, 2011 3:17 PM
To: jfw@lists.the-jdh.com
Subject: JFW 12 and Adobe Reader 10.1

Hello,



I have a student who's attempting to open PDF documents found through EBSCOhost to read using Adobe Reader 10.1. When the article is opened; however, JAWS cannot read anything. We were able to read the document with Read Out Loud. Is there a setting that needs to be changed to allow JAWS to read the document? Your assistance is greatly appreciated concerning this matter.



Sharon

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201112
19/df98a426/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: JFW 12 and Adobe Reader 10.1

Sharon Clark
 

Hello Eric,

Thank you so much! This worked! Now my student can read PDF documents.

Thanks Again,
Sharon

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Bergen, Eric
Sent: Monday, December 19, 2011 4:59 PM
To: 'The Jaws for Windows support list.'
Subject: RE: JFW 12 and Adobe Reader 10.1

Hi.
I am not sure if this will make a difference but try this.
Go to your start menu and open Adobe Reader.
Go to your edit menu and click on preferences.
Find General in the list and hit tab.
Keep tabbing until you find enable protected mode at startup and make sure
it is unchecked.
Tab to ok and hit enter.
This is what I did and I was able to read PDF documents after that.
As long as it is not a scanned document. In this case you will need OCR.
Hope this helps.
Eric.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Sharon Clark
Sent: Monday, December 19, 2011 3:17 PM
To: jfw@lists.the-jdh.com
Subject: JFW 12 and Adobe Reader 10.1

Hello,



I have a student who's attempting to open PDF documents found through
EBSCOhost to read using Adobe Reader 10.1. When the article is opened;
however, JAWS cannot read anything. We were able to read the document with
Read Out Loud. Is there a setting that needs to be changed to allow JAWS to
read the document? Your assistance is greatly appreciated concerning this
matter.



Sharon

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201112
19/df98a426/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


JAWS not announcing the list items.

Swati Sinha
 

Hello,
As the subject line suggest, I tried creating account on Gmail. But JAWS is not reading the list item properly.
For example, in the list item where I have to select "Gender", JAWS only says, "Gender 1", "Gender 2", "Gender 3".
Same way, when selecting location, it says, list of 252 items, but when moving down, it only announces, location 1, location 2,3,4 and ...
I am using
JAWS 11, Web browser: Fire Fox 8, Windows Xp.
Have I to install any scripts that I am missing?
Please help.



__________ Information from ESET NOD32 Antivirus, version of virus signature database 4628 (20091122) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111221/bbf816a7/attachment.html>;


Microsoft Lync

Ketan Kothari <muktaketan@...>
 

Dear Friends,

Does anyone use Microsoft Sync? Does anyone have scripts for this programme. I work for Sightsavers and we use this as our IM client for office purposes. Any help will be appreciated.
Ketan
Ketan Kothari
Ph: +91-22-24223281
Cell: 09987550614
MSN: muktaketan@hotmail.com
Skype: ketan3333
Twitter: @muktaketan
Facebook: www.facebook.com/muktaketan@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111221/7d7f63cf/attachment.html>;


Re: Webvisum with Firefox

Swati Sinha
 

Done!
Thank you so much.
really great!

----- Original Message -----
From: "Adrian Spratt" <Adrian@AdrianSpratt.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Tuesday, December 20, 2011 8:33 PM
Subject: RE: Webvisum with Firefox


Webvisum is working for me with FF8, the current version. However, I found I
had to re-enable it. Go to tools with alt-t, then o for options. You should
land on "general." If not, arrow up or down until you do.

Then shift-tab a few times until you land on the add-ons button. After this,
you may need to do some tabbing, some reading with the JAWS cursor and some
arrowing up and down. What you're looking for is extensions. When you do,
tab to a list of programs that Firefox calls extensions. Arrow down to
Webvisum, then tab. You should land on a button saying something to the
effect, "Enable Webvisum." Press the spacebar, then follow the prompt to
reboot Firefox.

Let us know if this works.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Swati Sinha
Sent: Tuesday, December 20, 2011 9:15 AM
To: The Jaws for Windows support list.
Subject: Webvisum with Firefox

Dear list members,
As the subject line goes, I would like to know how to make webvisum work
with my fire fox. Earlier it used to, when I was using V3.5, then I updated
it to FF 6 then Webvisum didn't work.
To make it work for me, I again downgraded to V3.5 but still Webvisum is not
working.
Nothing is happening on pressing Control + F2, whereas, on opening FF tools
menu, I can find Webvisum submenu where I can find preference submenu, where
I get the option to log in but after filling the login details, nothing
happens. And I am not logged in to webvisum.
I am using JAWS 11.
Please help ASAP, as I have to do some capcha solving task.
I will be greatly thankful to all of you.



__________ Information from ESET NOD32 Antivirus, version of virus signature
database 4628 (20091122) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201112
20/ebde0180/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

__________ Information from ESET NOD32 Antivirus, version of virus signature database 4628 (20091122) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus signature database 4628 (20091122) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com


Re: [Bulk] The best screen resolution with JAWS

Dave Durber
 

Dave & David:

It is more than likely not JAWS that is bitching about the screen resolution.

Many programmers, for a lot of companies, have decided that their particular software, is best used with a higher resolution, than what you have set the screen resolution in Windows.

When a particular application detects that the Windows resolution is lower than that set by the software manufacturer, an error messsage is displayed telling you so. Refusing to accept the applications suggestion, that the resolution should be changed to the higher setting, does not, nor will not, necessarily mean that information on the screen will not be displayed correctly.

However, There are certain applications, where using a lower resolution, rather than a higher resolution, could or would compromize the quality of the data being displayed.

People who use screen-readers, should not allow themselves to be confused between error messages displayed by their screen-reader and error messages displayed by Windows and any particular software application. We should all learn, as far as possible, the error messages for each application.

One more thing, we as users of adaptive technology, must never fall into the able bodied persons' trap, that is blaming the adaptive technology for the majority of errors and problems on our computers. Able bodied people, are always looking to blame specialized software, especially when they cannot, or do not want to be bothered diagnosing the real problem. A bad workperson always blames their tools, while a stupid person, an ignorant person, or a lazy person, will always blame someone else or something else, to cover up their stupidity, ignorance and laziness.

Sincerely:

Dave durber

----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@sbcglobal.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Monday, December 19, 2011 1:13 PM
Subject: Re: [Bulk] The best screen resolution with JAWS


David,

Sounds like a good start to a message to support@freedomscientific.com


Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "David" <davidwhitehead1957@cogeco.ca>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Monday, December 19, 2011 09:33
Subject: RE: [Bulk] The best screen resolution with JAWS


Hello Dave,

In most cases I agree with you,
Especially windows 7, the screen resolution shouldn't be an issue.

However, there's a couple client 64bit machine's I work on,
And with the screen resolution really high, jaws doesn't read didly squat
when I route jaws to pc.
However, wen I bring the resolution down to 1064 728 jaws reads fine.
Although jaws then starts to complain, that your not using the recommended
screen resolution settings.



-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Farfar on Laptop
Sent: Monday, December 19, 2011 12:19 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] The best screen resolution with JAWS

Anders,

You wrote: Earlier I used a screen resolution 1024*768, and sometime I still
use this


According to Freedom Scientific, it no longer matters what resolution you
use. I'm using 1920-1080, which is the recommended value for my laptop
display. No problems at all.

I think those days of having to worry about resolution are gone.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Anders Boholdt-Petersen"
<english_correspondences@boholdt-petersen.dk>
To: <jfw@lists.the-jdh.com>
Sent: Monday, December 19, 2011 09:02
Subject: [Bulk] The best screen resolution with JAWS


Hi everyone,

What is the best screen resolution when I have JAWS 11 to JAWS 13 installed
on both my Windows XP and my Windows 7 64-bit computer?

Earlier I used a screen resolution 1024*768, and sometime I still use this
screen resolution.

I have tried the screen resolution Windows 7 recommended (1280*1024), but
here I could not see the Facebook Chat with JAWS.

Very thanks for the answer.

Regards,
Anders


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Webvisum with Firefox

Adrian Spratt
 

Webvisum is working for me with FF8, the current version. However, I found I
had to re-enable it. Go to tools with alt-t, then o for options. You should
land on "general." If not, arrow up or down until you do.

Then shift-tab a few times until you land on the add-ons button. After this,
you may need to do some tabbing, some reading with the JAWS cursor and some
arrowing up and down. What you're looking for is extensions. When you do,
tab to a list of programs that Firefox calls extensions. Arrow down to
Webvisum, then tab. You should land on a button saying something to the
effect, "Enable Webvisum." Press the spacebar, then follow the prompt to
reboot Firefox.

Let us know if this works.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Swati Sinha
Sent: Tuesday, December 20, 2011 9:15 AM
To: The Jaws for Windows support list.
Subject: Webvisum with Firefox

Dear list members,
As the subject line goes, I would like to know how to make webvisum work
with my fire fox. Earlier it used to, when I was using V3.5, then I updated
it to FF 6 then Webvisum didn't work.
To make it work for me, I again downgraded to V3.5 but still Webvisum is not
working.
Nothing is happening on pressing Control + F2, whereas, on opening FF tools
menu, I can find Webvisum submenu where I can find preference submenu, where
I get the option to log in but after filling the login details, nothing
happens. And I am not logged in to webvisum.
I am using JAWS 11.
Please help ASAP, as I have to do some capcha solving task.
I will be greatly thankful to all of you.



__________ Information from ESET NOD32 Antivirus, version of virus signature
database 4628 (20091122) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201112
20/ebde0180/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Webvisum with Firefox

Swati Sinha
 

Dear list members,
As the subject line goes, I would like to know how to make webvisum work with my fire fox. Earlier it used to, when I was using V3.5, then I updated it to FF 6 then Webvisum didn't work.
To make it work for me, I again downgraded to V3.5 but still Webvisum is not working.
Nothing is happening on pressing Control + F2, whereas, on opening FF tools menu, I can find Webvisum submenu where I can find preference submenu, where I get the option to log in but after filling the login details, nothing happens. And I am not logged in to webvisum.
I am using JAWS 11.
Please help ASAP, as I have to do some capcha solving task.
I will be greatly thankful to all of you.



__________ Information from ESET NOD32 Antivirus, version of virus signature database 4628 (20091122) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111220/ebde0180/attachment.html>;


Re: JFW 12 and Adobe Reader 10.1

Lisle, Ted (CHFS DMS)
 

Isn't there a setting in Preferences one has to engage first? I haven't
fooled with 10 yet, but remember that much from earlier posts.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Sharon Clark
Sent: Monday, December 19, 2011 4:58 PM
To: 'The Jaws for Windows support list.'
Subject: RE: JFW 12 and Adobe Reader 10.1

That was my feeling as well. That's why it's mind boggling that Read Out
Loud can read it while JFW cannot. JFW is not saying that the document
is
empty it says blank as one is arrowing through the document.

Sharon

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Marquette, Ed
Sent: Monday, December 19, 2011 4:36 PM
To: The Jaws for Windows support list.
Subject: RE: JFW 12 and Adobe Reader 10.1

OK.
What is Read Out Loud? Someone has to do optical character recognition
on a
scanned picture of a document. I should think that, unless Read Out
Loud,
has built-in OCR capabilities, it would be as useless on scanned
documents
as JAWS is.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Rouillardmike@aol.com
Sent: Monday, December 19, 2011 3:23 PM
To: jfw@lists.the-jdh.com
Subject: Re: JFW 12 and Adobe Reader 10.1

This happens when the pdf is a scanned document. Jaws will say the
document
is empty because it is only a picture and adobe reader doesn't have OCR.
This issue can either be resolved by reading the document in read out
loud
or upgrading to jaws 13.
Mike



In a message dated 12/19/2011 4:19:10 P.M. Eastern Standard Time,
sharonjackson03@comcast.net writes:

Hello,



I have a student who's attempting to open PDF documents found through
EBSCOhost to read using Adobe Reader 10.1. When the article is opened;
however, JAWS cannot read anything. We were able to read the document
with
Read Out Loud. Is there a setting that needs to be changed to allow
JAWS
to read the document? Your assistance is greatly appreciated concerning
this matter.



Sharon

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20
1112
19/df98a426/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20
1112
19/868640a9/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
########################################################################
####
#################################
ANY FEDERAL TAX ADVICE CONTAINED IN THIS MESSAGE SHOULD NOT BE USED OR
REFERRED TO IN THE PROMOTING, MARKETING OR
RECOMMENDING OF ANY ENTITY, INVESTMENT PLAN OR ARRANGEMENT, AND SUCH
ADVICE
IS NOT INTENDED OR WRITTEN TO BE USED,
AND CANNOT BE USED, BY A TAXPAYER FOR THE PURPOSE OF AVOIDING PENALTIES
UNDER THE INTERNAL REVENUE CODE.
########################################################################
####
#################################
This E-mail message is confidential, is intended only for the named
recipient(s) above and may contain information
that is privileged, attorney work product or otherwise protected by
applicable law. If you have received this
message in error, please notify the sender at 402-346-6000 and delete
this
E-mail message.
Thank you.
########################################################################
####
#################################

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] Dragon and JAWS 133

Peter Holdstock <ptrholdstock@...>
 

Hi, I would suggest people try their onboard soundcards before going out and buying new ones as most laptops these days use either Intel or Realtek audio cards which have certainly worked fine for me. The headset is the main thing. I'm not sure what mine is but if I find out I'll pass it on. It works amazingly well out of the box. If you've got an Iphone you can even use that as the microphone and that works very well also.

peter

-----Original Message-----
From: Farfar on Laptop
Sent: Monday, December 19, 2011 11:07 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Dragon and JAWS 133

Ed,

Very impressive! If I ever start getting arthritis, I'll consider this
seriously.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Marquette, Ed" <Ed.Marquette@KutakRock.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Monday, December 19, 2011 14:44
Subject: [Bulk] Dragon and JAWS 133


Hello everyone:
This message is being dictated using Dragon Naturally Speaking. I promised
everyone that I would post a message as soon as I had fully installed Dragon
Naturally Speaking.
I did absolutely no training. This is version 11.5, and I am amazed with
its accuracy. In fact, I am dictating this e-mail message using Naturally
Speaking.
Here are some tips:
first, if you are using a laptop, your built in sound card is probably an
adequate. I would encourage you to use a USB sound card.
Second, in order to keep the Dragon Toolbar out of the way, under "options,"
be sure to put Naturally Speaking in the system tray.
Third, under Options, be sure to go to the hotkeys tab. There, create a set
of hotkeys that makes sense to you.
For those of you who are looking for a dictation solution, I highly
recommend Dragon Naturally Speaking.
Just so you know, I made absolutely no edits to this e-mail message.


I. Edward Marquette
Direct Dial: 816.502.4646
Mobile: 816.812.0088
Google Voice: 408.692.5640
Facsimile: 816.960.0041
Kutak Rock LLP
1010 Grand Boulevard
Suite 500
Kansas City, MO 64106
ed.marquette@kutakrock.com




#############################################################################################################
ANY FEDERAL TAX ADVICE CONTAINED IN THIS MESSAGE SHOULD NOT BE USED OR
REFERRED TO IN THE PROMOTING, MARKETING OR
RECOMMENDING OF ANY ENTITY, INVESTMENT PLAN OR ARRANGEMENT, AND SUCH ADVICE
IS NOT INTENDED OR WRITTEN TO BE USED,
AND CANNOT BE USED, BY A TAXPAYER FOR THE PURPOSE OF AVOIDING PENALTIES
UNDER THE INTERNAL REVENUE CODE.
#############################################################################################################
This E-mail message is confidential, is intended only for the named
recipient(s) above and may contain information
that is privileged, attorney work product or otherwise protected by
applicable law. If you have received this
message in error, please notify the sender at 402-346-6000 and delete this
E-mail message.
Thank you.
#############################################################################################################
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111219/00c1b3ef/attachment.html>;
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: JFW 12 and Adobe Reader 10.1

Sharon Clark
 

I did try this one, but nothing happen. Thanks for the suggestion.

Sharon

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Clark Friedrichs
Sent: Monday, December 19, 2011 8:14 PM
To: 'The Jaws for Windows support list.'
Subject: Re: JFW 12 and Adobe Reader 10.1

Also try this:
Start up Adobe
Under the edit menu, go to preferences
in the general menu go to internet
uncheck open pdf in browser

Good luck.

--------------------------------------------------
From: "Bergen, Eric" <Eric.Bergen@mtsallstream.com>
Sent: Monday, December 19, 2011 3:58 PM
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Subject: RE: JFW 12 and Adobe Reader 10.1

Hi.
I am not sure if this will make a difference but try this.
Go to your start menu and open Adobe Reader.
Go to your edit menu and click on preferences.
Find General in the list and hit tab.
Keep tabbing until you find enable protected mode at startup and make
sure it is unchecked.
Tab to ok and hit enter.
This is what I did and I was able to read PDF documents after that.
As long as it is not a scanned document. In this case you will need OCR.
Hope this helps.
Eric.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Sharon Clark
Sent: Monday, December 19, 2011 3:17 PM
To: jfw@lists.the-jdh.com
Subject: JFW 12 and Adobe Reader 10.1

Hello,



I have a student who's attempting to open PDF documents found through
EBSCOhost to read using Adobe Reader 10.1. When the article is opened;
however, JAWS cannot read anything. We were able to read the document
with Read Out Loud. Is there a setting that needs to be changed to
allow JAWS to read the document? Your assistance is greatly
appreciated concerning this matter.



Sharon

-------------- next part -------------- An HTML attachment was
scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/
20111219/df98a426/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com