Date   

moderated report builder:

charleseblack@...
 

Does anyone have any tutorials for report builder 3 and use by the blind?


moderated google forms

Juan Hernandez
 

Hi All,

 

I’m working with google forms for a project.

 

I have noticed that when I sent the form to my friend to review, that it shows up as blank in firefox, and internet explorer.  In chrome and edge it reads just fine.  In firefox or IE, if I cycle virtual pc cursor off then on, then the form reads great.

 

Any ideas why the form might not read right from the start in ff or ie?

 

Thanks.


moderated Re: Transition to Office 365

Randy Meyer
 

Robin:

 

I use office 365.  Word and excel are very similar to the earlier versions and I have had no problems with them.  Outlook is a little different, you need to use f6 and shift-f6 to move between mail boxes, but it does work.

 

Randy Meyer

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: Thursday, May 3, 2018 11:53 AM
To: JFW list (main@jfw.groups.io) <main@jfw.groups.io>
Subject: Transition to Office 365

 

Hello,

My company is going to be upgrading from Office 2010 to Office 365.  For those who have made that jump, how different of an experience is Office 365?  I am a heavy user of Outlook, Excel and Word and an occasional user of PowerPoint.

 

Robin



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: Transition to Office 365

ely.r@...
 

I would agree. I moved from 10 to 365 with few problems. I use Word, Excel and Outlook all the time. I would suggest spending a bit of time in options to configure settings as you had them in 10,

Rick

 

Dr. Rick Ely

TVI, Vision Consultant

451 Rocky Hill Road

Florence, MA 01062

&413()  727-3038

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Thursday, May 3, 2018 1:37 PM
To: main@jfw.groups.io
Subject: Re: Transition to Office 365

 

 I found the transition fairly smooth, there is a bit of a learning curve, but both a on line and computer-based system seems to work well 

 


From: main@jfw.groups.io <main@jfw.groups.io> on behalf of Van Lant, Robin via Groups.Io <Robin_Van_Lant@...>
Sent: Thursday, May 3, 2018 12:53:08 PM
To: JFW list (main@jfw.groups.io)
Subject: Transition to Office 365

 

Hello,

My company is going to be upgrading from Office 2010 to Office 365.  For those who have made that jump, how different of an experience is Office 365?  I am a heavy user of Outlook, Excel and Word and an occasional user of PowerPoint.

 

Robin



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: Transition to Office 365

Dan Longmore
 

 I found the transition fairly smooth, there is a bit of a learning curve, but both a on line and computer-based system seems to work well 


From: main@jfw.groups.io <main@jfw.groups.io> on behalf of Van Lant, Robin via Groups.Io <Robin_Van_Lant@...>
Sent: Thursday, May 3, 2018 12:53:08 PM
To: JFW list (main@jfw.groups.io)
Subject: Transition to Office 365
 

Hello,

My company is going to be upgrading from Office 2010 to Office 365.  For those who have made that jump, how different of an experience is Office 365?  I am a heavy user of Outlook, Excel and Word and an occasional user of PowerPoint.

 

Robin



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Transition to Office 365

Van Lant, Robin
 

Hello,

My company is going to be upgrading from Office 2010 to Office 365.  For those who have made that jump, how different of an experience is Office 365?  I am a heavy user of Outlook, Excel and Word and an occasional user of PowerPoint.

 

Robin



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated google slides and jfw 2018

Jed Barton <jedbarton@...>
 

Hey guys,
Anyone on here use google slides, and jfw 2018? Is it accessible?

Cheers,
Jed


moderated Re: Aomi partitioning tool

Nino Dagostino
 

Hi Dave:

 

I would appreciate that, looking forward for the instructions.

 

Have a good week end.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Thursday, May 3, 2018 3:57 AM
To: main@jfw.groups.io
Subject: Re: Aomi partitioning tool

 

Hello Nino:

 

How much of a hurry are you in to get what you want done?

 

I am going away for a few days and will not be back until Monday.

 

It is just a suggestion, you might be better off using the partition and format manager which comes with Windows. If you would like to try that Windows utility, I will write some instructions for you.

 

Let me know as soon as possible.

 

Sincerely:

 

Dave Durber

 

----- Original Message -----

Sent: Wednesday, May 02, 2018 8:22 PM

Subject: Re: Aomi partitioning tool

 

Hi:

 

I had to delete the partition it would not me reduce the size

Of the partition.

 

I had to delete the partition.

 

I think you might be right about adding space accept when I tried to do that I got some message about windows not being to recognize the space but I will try that again to add space.

 

I don’t know what operating system the book sencext uses?

 

I will keep you posted as to what happens.

 

Thank you for all of your help.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Wednesday, May 2, 2018 10:18 AM
To: main@jfw.groups.io
Subject: Re: Aomi partitioning tool

 

Hello Nino:

 

Did you delete the existing partition and creat a new 32 GB partition, then format the new partition or, did you reduce the size of the 64 GB partition to a 32 GB partition?

 

Wichever you did, you should be able to create an additional partition on the SD card, using the remaining space. With a bit of luck, your HIMS Device might read both partitions on the SD Card.

 

Sincerely:

 

Dave Durber

 

----- Original Message -----

Sent: Wednesday, May 02, 2018 2:13 PM

Subject: Re: Aomi partitioning tool

 

Hi:

 

I hope you are having a good day.

 

Thank you for your help, it worked.

 

I was able to use the card in my book sence

 

Thanks for the help .

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Wednesday, May 2, 2018 7:16 AM
To: main@jfw.groups.io
Subject: Re: Aomi partitioning tool

 

Hello Nino:

 

In respect to the SD card you wish to repartition:

 

1. Open Windows Explorer

 

2. Press the DOWN ARROW, until the SD card is highlighted.

 

3, Press ALT+ENTER, to open the properties for the SD card.

 

4. Route the JAWS Cursor to the PC cursor.

 

5. Use the NUM PAD DOWN ARROW, until JAWS says, "Capacity", followed by a long string of numbers, which is the total number of bytes for the card,followed by the total capacity in GB. Make a note of the total number of bytes, as this will be important when allocating the amount of space for the new or resized partition.

 

6. Press ALT+F4, to Close Windows Explorer.

 

7. in the Aomi partitioning software, , check to see if it has a function for increasing or decreasing the size of partitions. It might be better using that function, rather than deleting the existing partition and creating a new partition.

 

8. If it has such a function, check the edit fields. If one of the edit fields says something like, "Enter the maximum number of bytes for the resized partition:, devide the total number of bytes by 2, and enter the result in the edit field.

 

9. Follow the programs instructions to perform the action to reduce the size of the partition.

 

Note: Whether you delete the existing partition and create a new partition or, whether you resize the existing partition, bear in mind , your HIMS device may not recognize the 32 gb partition, This may be due to the HIMS software reading the total size of the SD card, in this case, 64 GB, and determining that it cannot access a partition or partitions on the SD card, even though a partition or partitions are of a size, which it could access, if the SD card was a 32 GB SD card. In my opinion, save yourself the bother, trouble and hassle, buy  a 32 GB SD card. Of course, in the short term, doing so, will cause some pain, aghony  and misery to the bank balance but,in the long-term, you will perminently have an SD card, which is the right capacity for your HIMS device, plus you will have access to the full 64 GB capacity of the 64 GB SD card.

 

HTH

 

Sincerely:

 

Dave Durber

 

----- Original Message -----

Sent: Tuesday, May 01, 2018 9:32 PM

Subject: Re: Aomi partitioning tool

 

Hi Dave:

 

I will take your advice.

 

You can believe this or not but, I am trying to repartition an sd card.

 

I have a 64 gig sd card my booksence will not recognize it and I don’t have any other cards I don’t to waste the card so I am going to delete the partition on the sd card and set up a partion of 32 gig on the card.

 

I will take your advice it sounds good.

 

Thanks a lot have a good day.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Tuesday, May 1, 2018 12:32 PM
To: main@jfw.groups.io
Subject: Re: Aomi partitioning tool

 

Hello Nino:

 

Is the drive you are wishing to perform partition activities, an internal drive?

 

Do you have more than the system drive and this particular drive connected to the computer as internal drives?

 

If So, power off the computer, disconnect all internal drives, except for the system drive and the particular drive on which you wish to perform the partition activities, likewise, disconnect any external drives as well. By doing this, you will minimize accidentally doing something to another drive which you did not intend to do.

 

I stupidly did not do this, and instantly regreted not doing so, when I accidentally started an erase function on a drive, only to find to my horror, I had started erasing a drive, which I did not wish, nor wanted to be erased. Fortunately, I quickly realized my ghastly mistake, and was able to stop the erase function. I sent the drive to a company which specializes in data recovery. Fortunately for me, they recovered virtually the entire data on the drive, in  its original organized layout. These companies are sometimes able to recover data from drives, even if the partition has become corrupted in some way.

 

HTH

 

Sincerely:

 

Dave Durber

 

----- Original Message -----

Sent: Tuesday, May 01, 2018 3:50 PM

Subject: Aomi partitioning tool

 

Good morning:

 

Using Jaws and aomin  partitioning tool the menues are accessibil, but you have to use the jaws curser a lot to get around.

 

How can you tell when something is highlited in Jaws.

 

I could not tell if the drive was highlighted I did not want to partition the rong drive.

 

Thank you.

 

 


moderated Re: Aomi partitioning tool

Dave Durber
 

Hello Nino:
 
How much of a hurry are you in to get what you want done?
 
I am going away for a few days and will not be back until Monday.
 
It is just a suggestion, you might be better off using the partition and format manager which comes with Windows. If you would like to try that Windows utility, I will write some instructions for you.
 
Let me know as soon as possible.
 
Sincerely:
 
Dave Durber
 

----- Original Message -----
Sent: Wednesday, May 02, 2018 8:22 PM
Subject: Re: Aomi partitioning tool

Hi:

 

I had to delete the partition it would not me reduce the size

Of the partition.

 

I had to delete the partition.

 

I think you might be right about adding space accept when I tried to do that I got some message about windows not being to recognize the space but I will try that again to add space.

 

I don’t know what operating system the book sencext uses?

 

I will keep you posted as to what happens.

 

Thank you for all of your help.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Wednesday, May 2, 2018 10:18 AM
To: main@jfw.groups.io
Subject: Re: Aomi partitioning tool

 

Hello Nino:

 

Did you delete the existing partition and creat a new 32 GB partition, then format the new partition or, did you reduce the size of the 64 GB partition to a 32 GB partition?

 

Wichever you did, you should be able to create an additional partition on the SD card, using the remaining space. With a bit of luck, your HIMS Device might read both partitions on the SD Card.

 

Sincerely:

 

Dave Durber

 

----- Original Message -----

Sent: Wednesday, May 02, 2018 2:13 PM

Subject: Re: Aomi partitioning tool

 

Hi:

 

I hope you are having a good day.

 

Thank you for your help, it worked.

 

I was able to use the card in my book sence

 

Thanks for the help .

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Wednesday, May 2, 2018 7:16 AM
To: main@jfw.groups.io
Subject: Re: Aomi partitioning tool

 

Hello Nino:

 

In respect to the SD card you wish to repartition:

 

1. Open Windows Explorer

 

2. Press the DOWN ARROW, until the SD card is highlighted.

 

3, Press ALT+ENTER, to open the properties for the SD card.

 

4. Route the JAWS Cursor to the PC cursor.

 

5. Use the NUM PAD DOWN ARROW, until JAWS says, "Capacity", followed by a long string of numbers, which is the total number of bytes for the card,followed by the total capacity in GB. Make a note of the total number of bytes, as this will be important when allocating the amount of space for the new or resized partition.

 

6. Press ALT+F4, to Close Windows Explorer.

 

7. in the Aomi partitioning software, , check to see if it has a function for increasing or decreasing the size of partitions. It might be better using that function, rather than deleting the existing partition and creating a new partition.

 

8. If it has such a function, check the edit fields. If one of the edit fields says something like, "Enter the maximum number of bytes for the resized partition:, devide the total number of bytes by 2, and enter the result in the edit field.

 

9. Follow the programs instructions to perform the action to reduce the size of the partition.

 

Note: Whether you delete the existing partition and create a new partition or, whether you resize the existing partition, bear in mind , your HIMS device may not recognize the 32 gb partition, This may be due to the HIMS software reading the total size of the SD card, in this case, 64 GB, and determining that it cannot access a partition or partitions on the SD card, even though a partition or partitions are of a size, which it could access, if the SD card was a 32 GB SD card. In my opinion, save yourself the bother, trouble and hassle, buy  a 32 GB SD card. Of course, in the short term, doing so, will cause some pain, aghony  and misery to the bank balance but,in the long-term, you will perminently have an SD card, which is the right capacity for your HIMS device, plus you will have access to the full 64 GB capacity of the 64 GB SD card.

 

HTH

 

Sincerely:

 

Dave Durber

 

----- Original Message -----

Sent: Tuesday, May 01, 2018 9:32 PM

Subject: Re: Aomi partitioning tool

 

Hi Dave:

 

I will take your advice.

 

You can believe this or not but, I am trying to repartition an sd card.

 

I have a 64 gig sd card my booksence will not recognize it and I don’t have any other cards I don’t to waste the card so I am going to delete the partition on the sd card and set up a partion of 32 gig on the card.

 

I will take your advice it sounds good.

 

Thanks a lot have a good day.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Tuesday, May 1, 2018 12:32 PM
To: main@jfw.groups.io
Subject: Re: Aomi partitioning tool

 

Hello Nino:

 

Is the drive you are wishing to perform partition activities, an internal drive?

 

Do you have more than the system drive and this particular drive connected to the computer as internal drives?

 

If So, power off the computer, disconnect all internal drives, except for the system drive and the particular drive on which you wish to perform the partition activities, likewise, disconnect any external drives as well. By doing this, you will minimize accidentally doing something to another drive which you did not intend to do.

 

I stupidly did not do this, and instantly regreted not doing so, when I accidentally started an erase function on a drive, only to find to my horror, I had started erasing a drive, which I did not wish, nor wanted to be erased. Fortunately, I quickly realized my ghastly mistake, and was able to stop the erase function. I sent the drive to a company which specializes in data recovery. Fortunately for me, they recovered virtually the entire data on the drive, in  its original organized layout. These companies are sometimes able to recover data from drives, even if the partition has become corrupted in some way.

 

HTH

 

Sincerely:

 

Dave Durber

 

----- Original Message -----

Sent: Tuesday, May 01, 2018 3:50 PM

Subject: Aomi partitioning tool

 

Good morning:

 

Using Jaws and aomin  partitioning tool the menues are accessibil, but you have to use the jaws curser a lot to get around.

 

How can you tell when something is highlited in Jaws.

 

I could not tell if the drive was highlighted I did not want to partition the rong drive.

 

Thank you.

 

 


moderated Re: Apology

Shirley Tracy
 

Thank you, Kathy Ann. Now I understand what the tutorial was trying to tell me—I’m just not used to this yet so didn’t follow what it was actually saying to do. And no worries, Nino. You have all been helpful, and I appreciate the help more than any of you will know.

  

Cheerfully,

Shirley Tracy

 

From: Nino Dagostino
Sent: Wednesday, May 2, 2018 6:59 PM
To: main@jfw.groups.io
Subject: Apology

 

I did not realize that Shirley was using windows10 Mail.

 

Thank you Kathy Anne for answering the question.

 

Have a good night everybody

 

 

 


moderated Apology

Nino Dagostino
 

I did not realize that Shirley was using windows10 Mail.

 

Thank you Kathy Anne for answering the question.

 

Have a good night everybody

 

 


moderated Re: sending attachments with Mail for Windows 10

Nino Dagostino
 

Hi:

 

I just realized in your email you are using the mail program for windows10.

 

I will check that out and get back to you as soon as I can.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
Sent: Wednesday, May 2, 2018 6:03 PM
To: main@jfw.groups.io
Subject: sending attachments with Mail for Windows 10

 

Help! How do I add an attachment to an email I’m sending someone? The directions Microsoft gives in the tutorial doesn’t work. Any ideas? Key strokes with JAWS?

 

Thanks for any help.

 

Shirley


moderated Re: sending attachments with Mail for Windows 10

CathyAnne Murtha
 

When in a new message, do the following:

 

1. Press ALT to enter command mode, this places you in the ribbon

2. press RIGHT ARROW until focus is on the ”Insert” ribbon

3. Press DOWN ARROW to locate “Files”

4. Press ENTER. This opens the “Open File” dialog through which you can select and attach a file.

 

 

CathyAnne

 

 

CathyAnne Murtha

Access Technology Institute, LLC

cathy@...

www.blind.training

(520) 300-7859

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
Sent: Wednesday, May 2, 2018 3:03 PM
To: main@jfw.groups.io
Subject: sending attachments with Mail for Windows 10

 

Help! How do I add an attachment to an email I’m sending someone? The directions Microsoft gives in the tutorial doesn’t work. Any ideas? Key strokes with JAWS?

 

Thanks for any help.

 

Shirley


moderated Re: sending attachments with Mail for Windows 10

Nino Dagostino
 

Hi:

 

If you are using outlook 2016 do the following

 

In outlook in the message press altn

2  tab over until you here insert atachments.

 

The alt n command is the insert command. When you open the attachments dialog box you can tab until you find your computer folders and drives.

Locate the file that you want to send and press the spacebar  tab to the left and you should find an insert button.

 

If you want to send more than one file at a time.

 

Open the attachments dialog box and hold down the control key now you can select files with the spacebar then click insert.

 

I will be checking my email through the evening if you need more help I will be happy to help you My name is Nino.

 

Have a good evening.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
Sent: Wednesday, May 2, 2018 6:03 PM
To: main@jfw.groups.io
Subject: sending attachments with Mail for Windows 10

 

Help! How do I add an attachment to an email I’m sending someone? The directions Microsoft gives in the tutorial doesn’t work. Any ideas? Key strokes with JAWS?

 

Thanks for any help.

 

Shirley


moderated sending attachments with Mail for Windows 10

Shirley Tracy
 

Help! How do I add an attachment to an email I’m sending someone? The directions Microsoft gives in the tutorial doesn’t work. Any ideas? Key strokes with JAWS?

 

Thanks for any help.

 

Shirley


moderated Re: Activating sound in Windows Safe Mode

Terrie Terlau
 

Hello Dave,
Sorry I saw your email so late and also sorry for your loss of your Inbox. I
would very much appreciate your directions and info about how to activate
sound in Safe Mode. My email is:
terrieter@...
Thanks very much for sharing this resource!
Sincerely,
Terrie Terlau

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Monday, April 16, 2018 9:57 AM
To: main@jfw.groups.io
Subject: Activating sound in Windows Safe Mode

Hello everyone:

A few weeks ago there was a discussion on the list, about activating sound
in Safe Mode.

I posted that I would be willing to share a .reg file which I obtained from
another member on this list, that would allow this to happen and I also said
I would provide instructions.

Unfortunately, due to some health problems and due to a problem with my
email client, I lost the entire contents of my inbox, including those list
members who sent me emails requesting the .reg file and the instructions.

If you are still interested in receiving the .reg file and instructions on
how to activate soundin Safe Mode, please email me at:

d.durber@...

including your email address in the body of the message, and I will reply to
the messages as quickly as possible.

Sincerely:

Dave Durber


moderated Re: Aomi partitioning tool

Nino Dagostino
 

Hi:

 

I had to delete the partition it would not me reduce the size

Of the partition.

 

I had to delete the partition.

 

I think you might be right about adding space accept when I tried to do that I got some message about windows not being to recognize the space but I will try that again to add space.

 

I don’t know what operating system the book sencext uses?

 

I will keep you posted as to what happens.

 

Thank you for all of your help.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Wednesday, May 2, 2018 10:18 AM
To: main@jfw.groups.io
Subject: Re: Aomi partitioning tool

 

Hello Nino:

 

Did you delete the existing partition and creat a new 32 GB partition, then format the new partition or, did you reduce the size of the 64 GB partition to a 32 GB partition?

 

Wichever you did, you should be able to create an additional partition on the SD card, using the remaining space. With a bit of luck, your HIMS Device might read both partitions on the SD Card.

 

Sincerely:

 

Dave Durber

 

----- Original Message -----

Sent: Wednesday, May 02, 2018 2:13 PM

Subject: Re: Aomi partitioning tool

 

Hi:

 

I hope you are having a good day.

 

Thank you for your help, it worked.

 

I was able to use the card in my book sence

 

Thanks for the help .

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Wednesday, May 2, 2018 7:16 AM
To: main@jfw.groups.io
Subject: Re: Aomi partitioning tool

 

Hello Nino:

 

In respect to the SD card you wish to repartition:

 

1. Open Windows Explorer

 

2. Press the DOWN ARROW, until the SD card is highlighted.

 

3, Press ALT+ENTER, to open the properties for the SD card.

 

4. Route the JAWS Cursor to the PC cursor.

 

5. Use the NUM PAD DOWN ARROW, until JAWS says, "Capacity", followed by a long string of numbers, which is the total number of bytes for the card,followed by the total capacity in GB. Make a note of the total number of bytes, as this will be important when allocating the amount of space for the new or resized partition.

 

6. Press ALT+F4, to Close Windows Explorer.

 

7. in the Aomi partitioning software, , check to see if it has a function for increasing or decreasing the size of partitions. It might be better using that function, rather than deleting the existing partition and creating a new partition.

 

8. If it has such a function, check the edit fields. If one of the edit fields says something like, "Enter the maximum number of bytes for the resized partition:, devide the total number of bytes by 2, and enter the result in the edit field.

 

9. Follow the programs instructions to perform the action to reduce the size of the partition.

 

Note: Whether you delete the existing partition and create a new partition or, whether you resize the existing partition, bear in mind , your HIMS device may not recognize the 32 gb partition, This may be due to the HIMS software reading the total size of the SD card, in this case, 64 GB, and determining that it cannot access a partition or partitions on the SD card, even though a partition or partitions are of a size, which it could access, if the SD card was a 32 GB SD card. In my opinion, save yourself the bother, trouble and hassle, buy  a 32 GB SD card. Of course, in the short term, doing so, will cause some pain, aghony  and misery to the bank balance but,in the long-term, you will perminently have an SD card, which is the right capacity for your HIMS device, plus you will have access to the full 64 GB capacity of the 64 GB SD card.

 

HTH

 

Sincerely:

 

Dave Durber

 

----- Original Message -----

Sent: Tuesday, May 01, 2018 9:32 PM

Subject: Re: Aomi partitioning tool

 

Hi Dave:

 

I will take your advice.

 

You can believe this or not but, I am trying to repartition an sd card.

 

I have a 64 gig sd card my booksence will not recognize it and I don’t have any other cards I don’t to waste the card so I am going to delete the partition on the sd card and set up a partion of 32 gig on the card.

 

I will take your advice it sounds good.

 

Thanks a lot have a good day.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Tuesday, May 1, 2018 12:32 PM
To: main@jfw.groups.io
Subject: Re: Aomi partitioning tool

 

Hello Nino:

 

Is the drive you are wishing to perform partition activities, an internal drive?

 

Do you have more than the system drive and this particular drive connected to the computer as internal drives?

 

If So, power off the computer, disconnect all internal drives, except for the system drive and the particular drive on which you wish to perform the partition activities, likewise, disconnect any external drives as well. By doing this, you will minimize accidentally doing something to another drive which you did not intend to do.

 

I stupidly did not do this, and instantly regreted not doing so, when I accidentally started an erase function on a drive, only to find to my horror, I had started erasing a drive, which I did not wish, nor wanted to be erased. Fortunately, I quickly realized my ghastly mistake, and was able to stop the erase function. I sent the drive to a company which specializes in data recovery. Fortunately for me, they recovered virtually the entire data on the drive, in  its original organized layout. These companies are sometimes able to recover data from drives, even if the partition has become corrupted in some way.

 

HTH

 

Sincerely:

 

Dave Durber

 

----- Original Message -----

Sent: Tuesday, May 01, 2018 3:50 PM

Subject: Aomi partitioning tool

 

Good morning:

 

Using Jaws and aomin  partitioning tool the menues are accessibil, but you have to use the jaws curser a lot to get around.

 

How can you tell when something is highlited in Jaws.

 

I could not tell if the drive was highlighted I did not want to partition the rong drive.

 

Thank you.

 

 


moderated Re: Entering a formula in Excel with JAWS 2018

Ann Byrne
 

FS tech support says it is a known problem and will be fixed in the next JAWS 2018 update.

At 10:21 AM 5/2/2018, you wrote:
Yes, I am running the latest version of Jaws 2018.

Randy Meyer

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Tuesday, May 1, 2018 8:34 PM
To: main@jfw.groups.io
Subject: Re: Entering a formula in Excel with JAWS 2018

Do you have the latest version of 2018--1804.26?
At 08:08 PM 5/1/2018, you wrote:
For me with Jaws 2018 when I press equals in a cell in excel, it says,
"edit, type in text". So, it does not tell me to type in a formula,
but it does tell me it is ready for editing. I then type in my formula.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Tuesday, May 1, 2018 5:06 PM
To: main@jfw.groups.io
Subject: Entering a formula in Excel with JAWS 2018

In JAWS 18 when I press '=' to begin a formula, JAWS says"Type in the
formula and press enter". In JAWS 2018 when I press "=", the '+'
appears to be accepted, but JAWS doesn't say anything. at all.
Pressing "=" a second time causes an error in the formula. The "="
keystroke is accepted by Excel, but JAWS says nothing. Is there a
setting I need to change in order to get the information spoken???

Thanks,












moderated Re: Entering a formula in Excel with JAWS 2018

Randy Meyer
 

Dave:

Thank you, I am not having any problem entering formulas in Excel. I was
responding to an earlier message in this thread. I was just sharing that
although I do not get a message to enter a formula, it is clear to me after
hitting equl that I can start typing.

Thanks for your thoughts.

Randy Meyer

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Wednesday, May 2, 2018 11:15 AM
To: main@jfw.groups.io
Subject: Re: Entering a formula in Excel with JAWS 2018

Randy,

First of all, is your Excel screen maximized? Secondly, there is a setting
in Excel to allow editing directly in the cell. I find this in my Excel 2007
version under Excel Options, Advanced, and several tabs along in that page.


Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer


----- Original Message -----
From: "Randy Meyer" <randymeyer@...>
To: <main@jfw.groups.io>
Sent: Wednesday, May 02, 2018 08:21
Subject: Re: Entering a formula in Excel with JAWS 2018


Yes, I am running the latest version of Jaws 2018.

Randy Meyer

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Tuesday, May 1, 2018 8:34 PM
To: main@jfw.groups.io
Subject: Re: Entering a formula in Excel with JAWS 2018

Do you have the latest version of 2018--1804.26?
At 08:08 PM 5/1/2018, you wrote:
For me with Jaws 2018 when I press equals in a cell in excel, it says,
"edit, type in text". So, it does not tell me to type in a formula,
but it does tell me it is ready for editing. I then type in my formula.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Tuesday, May 1, 2018 5:06 PM
To: main@jfw.groups.io
Subject: Entering a formula in Excel with JAWS 2018

In JAWS 18 when I press '=' to begin a formula, JAWS says"Type in the
formula and press enter". In JAWS 2018 when I press "=", the '+'
appears to be accepted, but JAWS doesn't say anything. at all.
Pressing "=" a second time causes an error in the formula. The "="
keystroke is accepted by Excel, but JAWS says nothing. Is there a
setting I need to change in order to get the information spoken???

Thanks,







moderated Re: Entering a formula in Excel with JAWS 2018

Dave...
 

Randy,

First of all, is your Excel screen maximized? Secondly, there is a setting
in Excel to allow editing directly in the cell. I find this in my Excel 2007
version under Excel Options, Advanced, and several tabs along in that page.


Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "Randy Meyer" <randymeyer@...>
To: <main@jfw.groups.io>
Sent: Wednesday, May 02, 2018 08:21
Subject: Re: Entering a formula in Excel with JAWS 2018


Yes, I am running the latest version of Jaws 2018.

Randy Meyer

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Tuesday, May 1, 2018 8:34 PM
To: main@jfw.groups.io
Subject: Re: Entering a formula in Excel with JAWS 2018

Do you have the latest version of 2018--1804.26?
At 08:08 PM 5/1/2018, you wrote:
For me with Jaws 2018 when I press equals in a cell in excel, it says,
"edit, type in text". So, it does not tell me to type in a formula,
but it does tell me it is ready for editing. I then type in my formula.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Tuesday, May 1, 2018 5:06 PM
To: main@jfw.groups.io
Subject: Entering a formula in Excel with JAWS 2018

In JAWS 18 when I press '=' to begin a formula, JAWS says"Type in the
formula and press enter". In JAWS 2018 when I press "=", the '+'
appears to be accepted, but JAWS doesn't say anything. at all.
Pressing "=" a second time causes an error in the formula. The "="
keystroke is accepted by Excel, but JAWS says nothing. Is there a
setting I need to change in order to get the information spoken???

Thanks,