Date   

moderated Re: Aomi partitioning tool

Dave Durber
 

Hello Nino:
 
In respect to the SD card you wish to repartition:
 
1. Open Windows Explorer
 
2. Press the DOWN ARROW, until the SD card is highlighted.
 
3, Press ALT+ENTER, to open the properties for the SD card.
 
4. Route the JAWS Cursor to the PC cursor.
 
5. Use the NUM PAD DOWN ARROW, until JAWS says, "Capacity", followed by a long string of numbers, which is the total number of bytes for the card,followed by the total capacity in GB. Make a note of the total number of bytes, as this will be important when allocating the amount of space for the new or resized partition.
 
6. Press ALT+F4, to Close Windows Explorer.
 
7. in the Aomi partitioning software, , check to see if it has a function for increasing or decreasing the size of partitions. It might be better using that function, rather than deleting the existing partition and creating a new partition.
 
8. If it has such a function, check the edit fields. If one of the edit fields says something like, "Enter the maximum number of bytes for the resized partition:, devide the total number of bytes by 2, and enter the result in the edit field.
 
9. Follow the programs instructions to perform the action to reduce the size of the partition.
 
Note: Whether you delete the existing partition and create a new partition or, whether you resize the existing partition, bear in mind , your HIMS device may not recognize the 32 gb partition, This may be due to the HIMS software reading the total size of the SD card, in this case, 64 GB, and determining that it cannot access a partition or partitions on the SD card, even though a partition or partitions are of a size, which it could access, if the SD card was a 32 GB SD card. In my opinion, save yourself the bother, trouble and hassle, buy  a 32 GB SD card. Of course, in the short term, doing so, will cause some pain, aghony  and misery to the bank balance but,in the long-term, you will perminently have an SD card, which is the right capacity for your HIMS device, plus you will have access to the full 64 GB capacity of the 64 GB SD card.
 
HTH
 
Sincerely:
 
Dave Durber
 

----- Original Message -----
Sent: Tuesday, May 01, 2018 9:32 PM
Subject: Re: Aomi partitioning tool

Hi Dave:

 

I will take your advice.

 

You can believe this or not but, I am trying to repartition an sd card.

 

I have a 64 gig sd card my booksence will not recognize it and I don’t have any other cards I don’t to waste the card so I am going to delete the partition on the sd card and set up a partion of 32 gig on the card.

 

I will take your advice it sounds good.

 

Thanks a lot have a good day.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Tuesday, May 1, 2018 12:32 PM
To: main@jfw.groups.io
Subject: Re: Aomi partitioning tool

 

Hello Nino:

 

Is the drive you are wishing to perform partition activities, an internal drive?

 

Do you have more than the system drive and this particular drive connected to the computer as internal drives?

 

If So, power off the computer, disconnect all internal drives, except for the system drive and the particular drive on which you wish to perform the partition activities, likewise, disconnect any external drives as well. By doing this, you will minimize accidentally doing something to another drive which you did not intend to do.

 

I stupidly did not do this, and instantly regreted not doing so, when I accidentally started an erase function on a drive, only to find to my horror, I had started erasing a drive, which I did not wish, nor wanted to be erased. Fortunately, I quickly realized my ghastly mistake, and was able to stop the erase function. I sent the drive to a company which specializes in data recovery. Fortunately for me, they recovered virtually the entire data on the drive, in  its original organized layout. These companies are sometimes able to recover data from drives, even if the partition has become corrupted in some way.

 

HTH

 

Sincerely:

 

Dave Durber

 

----- Original Message -----

Sent: Tuesday, May 01, 2018 3:50 PM

Subject: Aomi partitioning tool

 

Good morning:

 

Using Jaws and aomin  partitioning tool the menues are accessibil, but you have to use the jaws curser a lot to get around.

 

How can you tell when something is highlited in Jaws.

 

I could not tell if the drive was highlighted I did not want to partition the rong drive.

 

Thank you.

 

 


moderated Re: High Importance E-mail

kevin meyers <kman2020@...>
 

Does this work for windows 7? I tried alt H followed by h. Alt H brings up
the home tab. I arrow down and it dings. I then tab and it says lower ribbon
and new email. I arrow down and nothing happens. I tab and it brings up new
menu.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Bill White
Sent: Tuesday, May 01, 2018 8:57 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

The only time I have the Virtual Ribbon checked is in those instances where
JAWS seems to want to voice everything in the ribbon except what is under
the cursor. Then once I have found the option I want and have changed it, I
switch it right back to unchecked.

Bill White
billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 6:18 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

I agree, Carolyn!

Tom Behler


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Carolyn Arnold
Sent: Tuesday, May 01, 2018 8:13 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

In my opinion, you are better off not to have the Virtual Ribbon.

Best regards,

Carolyn


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 6:46 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

Bill:



I must have virtual ribbons unchecked here, because the Alt plus H followed
by H command works just fine.



Tom Behler





From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Tuesday, May 01, 2018 4:42 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail



Hi, Tom. ALT plus H, followed by H works here. You'll need to have Virtual
Ribbons unchecked in JAWS in the Default Configuration for this keystroke to
work.



Bill White

billwhite92701@...



From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 12:17 PM
To: 'jfw list'
Subject: High Importance E-mail



Hello, everyone.



Does anyone know of a key stroke for designating an e-mail as "high
importance" in Outlook 2016?



I can get to the high importance designation via the menus, but would like a
specific key stroke for doing this if that is available.



Am using the latest build of Jaws 2018 on a windows 7 laptop here.



Thanks as always!



Dr. Tom Behler From Michigan


moderated Re: High Importance E-mail

Bill White <billwhite92701@...>
 

The only time I have the Virtual Ribbon checked is in those instances where
JAWS seems to want to voice everything in the ribbon except what is under
the cursor. Then once I have found the option I want and have changed it, I
switch it right back to unchecked.

Bill White
billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 6:18 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

I agree, Carolyn!

Tom Behler


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Carolyn Arnold
Sent: Tuesday, May 01, 2018 8:13 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

In my opinion, you are better off not to have the Virtual Ribbon.

Best regards,

Carolyn


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 6:46 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

Bill:



I must have virtual ribbons unchecked here, because the Alt plus H followed
by H command works just fine.



Tom Behler





From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Tuesday, May 01, 2018 4:42 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail



Hi, Tom. ALT plus H, followed by H works here. You'll need to have Virtual
Ribbons unchecked in JAWS in the Default Configuration for this keystroke to
work.



Bill White

billwhite92701@...



From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 12:17 PM
To: 'jfw list'
Subject: High Importance E-mail



Hello, everyone.



Does anyone know of a key stroke for designating an e-mail as "high
importance" in Outlook 2016?



I can get to the high importance designation via the menus, but would like a
specific key stroke for doing this if that is available.



Am using the latest build of Jaws 2018 on a windows 7 laptop here.



Thanks as always!



Dr. Tom Behler From Michigan


moderated Re: Entering a formula in Excel with JAWS 2018

Ann Byrne
 

Do you have the latest version of 2018--1804.26?

At 08:08 PM 5/1/2018, you wrote:
For me with Jaws 2018 when I press equals in a cell in excel, it says,
"edit, type in text". So, it does not tell me to type in a formula, but it
does tell me it is ready for editing. I then type in my formula.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Tuesday, May 1, 2018 5:06 PM
To: main@jfw.groups.io
Subject: Entering a formula in Excel with JAWS 2018

In JAWS 18 when I press '=' to begin a formula, JAWS says"Type in the
formula and press enter". In JAWS 2018 when I press "=", the '+'
appears to be accepted, but JAWS doesn't say anything. at all. Pressing
"=" a second time causes an error in the formula. The "=" keystroke is
accepted by Excel, but JAWS says nothing. Is there a setting I need to
change in order to get the information spoken???

Thanks,







moderated Re: High Importance E-mail

Tom Behler
 

I agree, Carolyn!

Tom Behler

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Carolyn Arnold
Sent: Tuesday, May 01, 2018 8:13 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

In my opinion, you are better off not to have the Virtual Ribbon.

Best regards,

Carolyn


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 6:46 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

Bill:



I must have virtual ribbons unchecked here, because the Alt plus H followed
by H command works just fine.



Tom Behler





From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Tuesday, May 01, 2018 4:42 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail



Hi, Tom. ALT plus H, followed by H works here. You'll need to have Virtual
Ribbons unchecked in JAWS in the Default Configuration for this keystroke to
work.



Bill White

billwhite92701@...



From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 12:17 PM
To: 'jfw list'
Subject: High Importance E-mail



Hello, everyone.



Does anyone know of a key stroke for designating an e-mail as "high
importance" in Outlook 2016?



I can get to the high importance designation via the menus, but would like a
specific key stroke for doing this if that is available.



Am using the latest build of Jaws 2018 on a windows 7 laptop here.



Thanks as always!



Dr. Tom Behler From Michigan


moderated Re: Entering a formula in Excel with JAWS 2018

Randy Meyer
 

For me with Jaws 2018 when I press equals in a cell in excel, it says,
"edit, type in text". So, it does not tell me to type in a formula, but it
does tell me it is ready for editing. I then type in my formula.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Tuesday, May 1, 2018 5:06 PM
To: main@jfw.groups.io
Subject: Entering a formula in Excel with JAWS 2018

In JAWS 18 when I press '=' to begin a formula, JAWS says"Type in the
formula and press enter". In JAWS 2018 when I press "=", the '+'
appears to be accepted, but JAWS doesn't say anything. at all. Pressing
"=" a second time causes an error in the formula. The "=" keystroke is
accepted by Excel, but JAWS says nothing. Is there a setting I need to
change in order to get the information spoken???

Thanks,


moderated Re: High Importance E-mail

Bill White <billwhite92701@...>
 

That's what I told him, Carolyn.

Bill White
billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Carolyn
Arnold
Sent: Tuesday, May 1, 2018 5:13 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

In my opinion, you are better off not to have the Virtual
Ribbon.

Best regards,

Carolyn


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On
Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 6:46 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

Bill:



I must have virtual ribbons unchecked here, because the Alt
plus H followed by H command works just fine.



Tom Behler





From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
Bill White
Sent: Tuesday, May 01, 2018 4:42 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail



Hi, Tom. ALT plus H, followed by H works here. You'll need
to have Virtual Ribbons unchecked in JAWS in the Default
Configuration for this keystroke to work.



Bill White

billwhite92701@...



From: main@jfw.groups.io [mailto:main@jfw.groups.io] On
Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 12:17 PM
To: 'jfw list'
Subject: High Importance E-mail



Hello, everyone.



Does anyone know of a key stroke for designating an e-mail
as "high importance" in Outlook 2016?



I can get to the high importance designation via the menus,
but would like a specific key stroke for doing this if that
is available.



Am using the latest build of Jaws 2018 on a windows 7 laptop
here.



Thanks as always!



Dr. Tom Behler From Michigan


moderated Re: reading onscreen messages and taking action

Shirley Tracy
 

                Thanks, Dan. I’ll certainly try this the next time I get a notification such as the one I described. I never knew where the notification actually was, especially in my Windows 10. Like I said, I could handle notices in my Windows 7.

 

Thanks again.

 

 

 

Shirley Tracy

 

From: Dan Longmore
Sent: Tuesday, May 1, 2018 7:36 PM
To: main@jfw.groups.io
Subject: Re: reading onscreen messages and taking action

 

Hi,

  Sounds like this is a popup occurring in your notification area on your taskbar.  “CTRL” and “F11” keys will give you list of notifications .  You can then click , Enter key, on the item and choose an option from the context menu which appears after you select the item.  One problem is that these popups have only a short life so if you want them to remain longer go to the “notifications”  area under “System” in your “settings” .  This may differ a bit with different OS’s but this is where I find the notification in settings in Win. 10

Hope this helps.

 

Dan Longmore

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
Sent: Tuesday, May 1, 2018 4:39 PM
To: main@jfw.groups.io
Subject: reading onscreen messages and taking action

 

Hi all,

 

I don’t know the technical terms for this, so I’ll just give you an example:

 

When I am printing a large document, for example, I get a message that says I’m out of paper, “Load more paper.” I used to be able to click “cansel” or “okay.” Now I hear the message but it goes away, and I cannot seem to find it with my cursers in order to click either choice. How do I get to the messages and the choices to click on them? 

 

 

Thanks for all your help.

 

Shirley Tracy

 


moderated Re: High Importance E-mail

Carolyn Arnold <4carolyna@...>
 

In my opinion, you are better off not to have the Virtual
Ribbon.

Best regards,

Carolyn

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On
Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 6:46 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

Bill:



I must have virtual ribbons unchecked here, because the Alt
plus H followed by H command works just fine.



Tom Behler





From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
Bill White
Sent: Tuesday, May 01, 2018 4:42 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail



Hi, Tom. ALT plus H, followed by H works here. You'll need
to have Virtual Ribbons unchecked in JAWS in the Default
Configuration for this keystroke to work.



Bill White

billwhite92701@...



From: main@jfw.groups.io [mailto:main@jfw.groups.io] On
Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 12:17 PM
To: 'jfw list'
Subject: High Importance E-mail



Hello, everyone.



Does anyone know of a key stroke for designating an e-mail
as "high importance" in Outlook 2016?



I can get to the high importance designation via the menus,
but would like a specific key stroke for doing this if that
is available.



Am using the latest build of Jaws 2018 on a windows 7 laptop
here.



Thanks as always!



Dr. Tom Behler From Michigan


moderated Re: reading onscreen messages and taking action

Dan Longmore
 

Hi,

  Sounds like this is a popup occurring in your notification area on your taskbar.  “CTRL” and “F11” keys will give you list of notifications .  You can then click , Enter key, on the item and choose an option from the context menu which appears after you select the item.  One problem is that these popups have only a short life so if you want them to remain longer go to the “notifications”  area under “System” in your “settings” .  This may differ a bit with different OS’s but this is where I find the notification in settings in Win. 10

Hope this helps.

 

Dan Longmore

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
Sent: Tuesday, May 1, 2018 4:39 PM
To: main@jfw.groups.io
Subject: reading onscreen messages and taking action

 

Hi all,

 

I don’t know the technical terms for this, so I’ll just give you an example:

 

When I am printing a large document, for example, I get a message that says I’m out of paper, “Load more paper.” I used to be able to click “cansel” or “okay.” Now I hear the message but it goes away, and I cannot seem to find it with my cursers in order to click either choice. How do I get to the messages and the choices to click on them? 

 

 

Thanks for all your help.

 

Shirley Tracy


moderated Re: High Importance E-mail

Tom Behler
 

Bill:

 

I did a test here, and after sending the high importance message, my Outlook seemed to revert back to low importance as the default.

 

I’ll keep the Alt plus H followed by L command in mind, though, in case I get into problems later.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Tuesday, May 01, 2018 5:01 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

 

Hi again, Tom. If your next message doesn’t revert back to unflagged, there seems to be only two options: either high importance or low importance. The keystroke for low importance is ALT plus H followed by L.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 1:06 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

 

Cathyanne:

 

Another list member suggested alt H followed by another H when in the body of the e-mail you wish to send, and it seems to work here.

 

Am using Outlook 2016 with the latest build of Jaws 2018 on a Windows 7 laptop.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of CathyAnne Murtha
Sent: Tuesday, May 01, 2018 4:01 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

 

I’ve thoroughly explored all the keystrokes for Office 2016 and I don’t believe there is a keystroke for that specific feature. The best you can do is memorize the ribbon key tip and use it.

 

 

CathyAnne

 

 

CathyAnne Murtha

Access Technology Institute, LLC

cathy@...

www.blind.training

(520) 300-7859

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 12:17 PM
To: 'jfw list' <jfw@groups.io>
Subject: High Importance E-mail

 

Hello, everyone.

 

Does anyone know of a key stroke for designating an e-mail as “high importance” in Outlook 2016?

 

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

 

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

 

Thanks as always!

 

Dr.  Tom Behler From Michigan

 

 


moderated Re: High Importance E-mail

Tom Behler
 

Bill:

 

I must have virtual ribbons unchecked here, because the Alt plus H followed by H command works just fine.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Tuesday, May 01, 2018 4:42 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

 

Hi, Tom. ALT plus H, followed by H works here. You’ll need to have Virtual Ribbons unchecked in JAWS in the Default Configuration for this keystroke to work.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 12:17 PM
To: 'jfw list'
Subject: High Importance E-mail

 

Hello, everyone.

 

Does anyone know of a key stroke for designating an e-mail as “high importance” in Outlook 2016?

 

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

 

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

 

Thanks as always!

 

Dr.  Tom Behler From Michigan

 

 


moderated Re: High Importance E-mail

Tom Behler
 

Mike:

 

Yes, this does work.

 

I got this suggestion from someone else on the list too, and appreciate it greatly.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Michael Mote
Sent: Tuesday, May 01, 2018 4:29 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail
Importance: High

 

Hi Tom!  Try Alt H followed by the letter H to see if that works. 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 3:17 PM
To: 'jfw list' <jfw@groups.io>
Subject: High Importance E-mail

 

Hello, everyone.

 

Does anyone know of a key stroke for designating an e-mail as “high importance” in Outlook 2016?

 

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

 

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

 

Thanks as always!

 

Dr.  Tom Behler From Michigan

 

 


moderated Re: Entering a formula in Excel with JAWS 2018

Mario
 

just a shot in the dark, but did you try after maximizing the windows
with alt+spacebar x?

-------- Original Message --------
From: Ann Byrne [mailto:annakb@...]
Sent: Tuesday, May 1, 2018 6:05 PM EST
To: main@jfw.groups.io
Subject: Entering a formula in Excel with JAWS 2018

In JAWS 18 when I press '=' to begin a formula, JAWS says"Type in the
formula and press enter".  In JAWS 2018 when I press "=", the '+'
appears to be accepted, but JAWS doesn't say anything.  at all.
Pressing "=" a second time causes an error in the formula.  The "="
keystroke is accepted by Excel, but JAWS says nothing.  Is there a
setting I need to change in order to get the information spoken???

Thanks,




.


moderated Entering a formula in Excel with JAWS 2018

Ann Byrne
 

In JAWS 18 when I press '=' to begin a formula, JAWS says"Type in the formula and press enter". In JAWS 2018 when I press "=", the '+' appears to be accepted, but JAWS doesn't say anything. at all. Pressing "=" a second time causes an error in the formula. The "=" keystroke is accepted by Excel, but JAWS says nothing. Is there a setting I need to change in order to get the information spoken???

Thanks,


moderated Re: High Importance E-mail

Ann Byrne
 

Yes, it still works in 2016. This is awesome!

At 04:28 PM 5/1/2018, you wrote:
If it still works in Outlook 2016, Alt Enter opens a dialog of message settings that includes a drop down for priority, sensitivity and a couple other message options. This the way I sent high priority. I'm still in Outlook 2010.




From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 01, 2018 1:17 PM
To: 'jfw list'
Subject: High Importance E-mail

Hello, everyone.

Does anyone know of a key stroke for designating an e-mail as "high importance" in Outlook 2016?

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

Thanks as always!

Dr. Tom Behler From Michigan




This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: High Importance E-mail

Bill White <billwhite92701@...>
 

Hi, Mike. What I discovered is this:

 

If I set a message from Normal Importance to either High Importance or to Low Importance, I can toggle it back to normal importance simply by using one of the following keystrokes.

 

If the message is set to High Importance, the keystroke ALT plus H, followed by H will uncheck the High Importance flag, and return it to normal.

 

If the message is set to Low Importance, the keystroke ALT plus H, followed by L will uncheck the Low Importance flag, and return it to normal.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mike Ulrich
Sent: Tuesday, May 1, 2018 2:32 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail
Importance: Low

 

Alt Enter also works in Outlook 2010

 

Michael D. Ulrich

Just an ordinary average blind guy!

“Providing Insight for Blindness”

Florida Council of the Blind

Fundraising Committee Member

Home Phone: 239-540-7431

Cell phone: 239-565-5845

Email: mulrich@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Van Lant, Robin via Groups.Io
Sent: Tuesday, May 01, 2018 5:29 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

 

If it still works in Outlook 2016, Alt Enter opens a dialog of message settings that includes a drop down for priority, sensitivity and a couple other message options.  This the way I sent high priority. I’m still in Outlook 2010.

 

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 01, 2018 1:17 PM
To: 'jfw list'
Subject: High Importance E-mail

 

Hello, everyone.

 

Does anyone know of a key stroke for designating an e-mail as “high importance” in Outlook 2016?

 

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

 

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

 

Thanks as always!

 

Dr.  Tom Behler From Michigan

 

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: High Importance E-mail

Mike Ulrich <mulrich@...>
 

Alt Enter also works in Outlook 2010

 

Michael D. Ulrich

Just an ordinary average blind guy!

“Providing Insight for Blindness”

Florida Council of the Blind

Fundraising Committee Member

Home Phone: 239-540-7431

Cell phone: 239-565-5845

Email: mulrich@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Van Lant, Robin via Groups.Io
Sent: Tuesday, May 01, 2018 5:29 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

 

If it still works in Outlook 2016, Alt Enter opens a dialog of message settings that includes a drop down for priority, sensitivity and a couple other message options.  This the way I sent high priority. I’m still in Outlook 2010.

 

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 01, 2018 1:17 PM
To: 'jfw list'
Subject: High Importance E-mail

 

Hello, everyone.

 

Does anyone know of a key stroke for designating an e-mail as “high importance” in Outlook 2016?

 

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

 

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

 

Thanks as always!

 

Dr.  Tom Behler From Michigan

 

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: High Importance E-mail

Van Lant, Robin
 

If it still works in Outlook 2016, Alt Enter opens a dialog of message settings that includes a drop down for priority, sensitivity and a couple other message options.  This the way I sent high priority. I’m still in Outlook 2010.

 

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 01, 2018 1:17 PM
To: 'jfw list'
Subject: High Importance E-mail

 

Hello, everyone.

 

Does anyone know of a key stroke for designating an e-mail as “high importance” in Outlook 2016?

 

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

 

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

 

Thanks as always!

 

Dr.  Tom Behler From Michigan

 

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: High Importance E-mail

Bill White <billwhite92701@...>
 

Hi again, Tom. If your next message doesn’t revert back to unflagged, there seems to be only two options: either high importance or low importance. The keystroke for low importance is ALT plus H followed by L.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 1:06 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

 

Cathyanne:

 

Another list member suggested alt H followed by another H when in the body of the e-mail you wish to send, and it seems to work here.

 

Am using Outlook 2016 with the latest build of Jaws 2018 on a Windows 7 laptop.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of CathyAnne Murtha
Sent: Tuesday, May 01, 2018 4:01 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

 

I’ve thoroughly explored all the keystrokes for Office 2016 and I don’t believe there is a keystroke for that specific feature. The best you can do is memorize the ribbon key tip and use it.

 

 

CathyAnne

 

 

CathyAnne Murtha

Access Technology Institute, LLC

cathy@...

www.blind.training

(520) 300-7859

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 12:17 PM
To: 'jfw list' <jfw@groups.io>
Subject: High Importance E-mail

 

Hello, everyone.

 

Does anyone know of a key stroke for designating an e-mail as “high importance” in Outlook 2016?

 

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

 

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

 

Thanks as always!

 

Dr.  Tom Behler From Michigan

 

 

43781 - 43800 of 102737