Date   

moderated Re: Entering a formula in Excel with JAWS 2018

Mario
 

just a shot in the dark, but did you try after maximizing the windows
with alt+spacebar x?

-------- Original Message --------
From: Ann Byrne [mailto:annakb@...]
Sent: Tuesday, May 1, 2018 6:05 PM EST
To: main@jfw.groups.io
Subject: Entering a formula in Excel with JAWS 2018

In JAWS 18 when I press '=' to begin a formula, JAWS says"Type in the
formula and press enter".  In JAWS 2018 when I press "=", the '+'
appears to be accepted, but JAWS doesn't say anything.  at all.
Pressing "=" a second time causes an error in the formula.  The "="
keystroke is accepted by Excel, but JAWS says nothing.  Is there a
setting I need to change in order to get the information spoken???

Thanks,




.


moderated Entering a formula in Excel with JAWS 2018

Ann Byrne
 

In JAWS 18 when I press '=' to begin a formula, JAWS says"Type in the formula and press enter". In JAWS 2018 when I press "=", the '+' appears to be accepted, but JAWS doesn't say anything. at all. Pressing "=" a second time causes an error in the formula. The "=" keystroke is accepted by Excel, but JAWS says nothing. Is there a setting I need to change in order to get the information spoken???

Thanks,


moderated Re: High Importance E-mail

Ann Byrne
 

Yes, it still works in 2016. This is awesome!

At 04:28 PM 5/1/2018, you wrote:
If it still works in Outlook 2016, Alt Enter opens a dialog of message settings that includes a drop down for priority, sensitivity and a couple other message options. This the way I sent high priority. I'm still in Outlook 2010.




From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 01, 2018 1:17 PM
To: 'jfw list'
Subject: High Importance E-mail

Hello, everyone.

Does anyone know of a key stroke for designating an e-mail as "high importance" in Outlook 2016?

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

Thanks as always!

Dr. Tom Behler From Michigan




This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: High Importance E-mail

Bill White <billwhite92701@...>
 

Hi, Mike. What I discovered is this:

 

If I set a message from Normal Importance to either High Importance or to Low Importance, I can toggle it back to normal importance simply by using one of the following keystrokes.

 

If the message is set to High Importance, the keystroke ALT plus H, followed by H will uncheck the High Importance flag, and return it to normal.

 

If the message is set to Low Importance, the keystroke ALT plus H, followed by L will uncheck the Low Importance flag, and return it to normal.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mike Ulrich
Sent: Tuesday, May 1, 2018 2:32 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail
Importance: Low

 

Alt Enter also works in Outlook 2010

 

Michael D. Ulrich

Just an ordinary average blind guy!

“Providing Insight for Blindness”

Florida Council of the Blind

Fundraising Committee Member

Home Phone: 239-540-7431

Cell phone: 239-565-5845

Email: mulrich@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Van Lant, Robin via Groups.Io
Sent: Tuesday, May 01, 2018 5:29 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

 

If it still works in Outlook 2016, Alt Enter opens a dialog of message settings that includes a drop down for priority, sensitivity and a couple other message options.  This the way I sent high priority. I’m still in Outlook 2010.

 

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 01, 2018 1:17 PM
To: 'jfw list'
Subject: High Importance E-mail

 

Hello, everyone.

 

Does anyone know of a key stroke for designating an e-mail as “high importance” in Outlook 2016?

 

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

 

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

 

Thanks as always!

 

Dr.  Tom Behler From Michigan

 

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: High Importance E-mail

Mike Ulrich <mulrich@...>
 

Alt Enter also works in Outlook 2010

 

Michael D. Ulrich

Just an ordinary average blind guy!

“Providing Insight for Blindness”

Florida Council of the Blind

Fundraising Committee Member

Home Phone: 239-540-7431

Cell phone: 239-565-5845

Email: mulrich@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Van Lant, Robin via Groups.Io
Sent: Tuesday, May 01, 2018 5:29 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

 

If it still works in Outlook 2016, Alt Enter opens a dialog of message settings that includes a drop down for priority, sensitivity and a couple other message options.  This the way I sent high priority. I’m still in Outlook 2010.

 

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 01, 2018 1:17 PM
To: 'jfw list'
Subject: High Importance E-mail

 

Hello, everyone.

 

Does anyone know of a key stroke for designating an e-mail as “high importance” in Outlook 2016?

 

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

 

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

 

Thanks as always!

 

Dr.  Tom Behler From Michigan

 

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: High Importance E-mail

Van Lant, Robin
 

If it still works in Outlook 2016, Alt Enter opens a dialog of message settings that includes a drop down for priority, sensitivity and a couple other message options.  This the way I sent high priority. I’m still in Outlook 2010.

 

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 01, 2018 1:17 PM
To: 'jfw list'
Subject: High Importance E-mail

 

Hello, everyone.

 

Does anyone know of a key stroke for designating an e-mail as “high importance” in Outlook 2016?

 

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

 

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

 

Thanks as always!

 

Dr.  Tom Behler From Michigan

 

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: High Importance E-mail

Bill White <billwhite92701@...>
 

Hi again, Tom. If your next message doesn’t revert back to unflagged, there seems to be only two options: either high importance or low importance. The keystroke for low importance is ALT plus H followed by L.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 1:06 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

 

Cathyanne:

 

Another list member suggested alt H followed by another H when in the body of the e-mail you wish to send, and it seems to work here.

 

Am using Outlook 2016 with the latest build of Jaws 2018 on a Windows 7 laptop.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of CathyAnne Murtha
Sent: Tuesday, May 01, 2018 4:01 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

 

I’ve thoroughly explored all the keystrokes for Office 2016 and I don’t believe there is a keystroke for that specific feature. The best you can do is memorize the ribbon key tip and use it.

 

 

CathyAnne

 

 

CathyAnne Murtha

Access Technology Institute, LLC

cathy@...

www.blind.training

(520) 300-7859

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 12:17 PM
To: 'jfw list' <jfw@groups.io>
Subject: High Importance E-mail

 

Hello, everyone.

 

Does anyone know of a key stroke for designating an e-mail as “high importance” in Outlook 2016?

 

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

 

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

 

Thanks as always!

 

Dr.  Tom Behler From Michigan

 

 


moderated Re: High Importance E-mail

CathyAnne Murtha <cathy@...>
 

Yes. Those are the commands to activate the key tip in the ribbon.

CathyAnne

---

CathyAnne Murtha
CEO
Access Technology Institute, LLC
www.blind.training
cathy@...
Phone: (520) 300-7859



On Tue, May 1, 2018 at 1:42 PM -0700, "Bill White" <billwhite92701@...> wrote:

Hi, Tom. ALT plus H, followed by H works here. You’ll need to have Virtual Ribbons unchecked in JAWS in the Default Configuration for this keystroke to work.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 12:17 PM
To: 'jfw list'
Subject: High Importance E-mail

 

Hello, everyone.

 

Does anyone know of a key stroke for designating an e-mail as “high importance” in Outlook 2016?

 

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

 

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

 

Thanks as always!

 

Dr.  Tom Behler From Michigan

 

 


moderated Re: High Importance E-mail

Bill White <billwhite92701@...>
 

Hi, Tom. ALT plus H, followed by H works here. You’ll need to have Virtual Ribbons unchecked in JAWS in the Default Configuration for this keystroke to work.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 12:17 PM
To: 'jfw list'
Subject: High Importance E-mail

 

Hello, everyone.

 

Does anyone know of a key stroke for designating an e-mail as “high importance” in Outlook 2016?

 

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

 

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

 

Thanks as always!

 

Dr.  Tom Behler From Michigan

 

 


moderated reading onscreen messages and taking action

Shirley Tracy
 

Hi all,

 

I don’t know the technical terms for this, so I’ll just give you an example:

 

When I am printing a large document, for example, I get a message that says I’m out of paper, “Load more paper.” I used to be able to click “cansel” or “okay.” Now I hear the message but it goes away, and I cannot seem to find it with my cursers in order to click either choice. How do I get to the messages and the choices to click on them? 

 

 

Thanks for all your help.

 

Shirley Tracy


moderated Re: Aomi partitioning tool

Nino dagostino
 

Thank you very mutch.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bissett, Tom
Sent: Tuesday, May 1, 2018 11:32 AM
To: main@jfw.groups.io
Subject: Re: Aomi partitioning tool

 

If you use the jawsKey + F it gives you all the font information including whether it is highlighted.  Hopefully this will help.

Regards

Tom Bisset

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Nino Dagostino
Sent: Tuesday, May 01, 2018 10:51 AM
To: main@jfw.groups.io
Subject: Aomi partitioning tool

 

Good morning:

 

Using Jaws and aomin  partitioning tool the menues are accessibil, but you have to use the jaws curser a lot to get around.

 

How can you tell when something is highlited in Jaws.

 

I could not tell if the drive was highlighted I did not want to partition the rong drive.

 

Thank you.

 

 


moderated Re: Aomi partitioning tool

Nino dagostino
 

Hi Dave:

 

I will take your advice.

 

You can believe this or not but, I am trying to repartition an sd card.

 

I have a 64 gig sd card my booksence will not recognize it and I don’t have any other cards I don’t to waste the card so I am going to delete the partition on the sd card and set up a partion of 32 gig on the card.

 

I will take your advice it sounds good.

 

Thanks a lot have a good day.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Tuesday, May 1, 2018 12:32 PM
To: main@jfw.groups.io
Subject: Re: Aomi partitioning tool

 

Hello Nino:

 

Is the drive you are wishing to perform partition activities, an internal drive?

 

Do you have more than the system drive and this particular drive connected to the computer as internal drives?

 

If So, power off the computer, disconnect all internal drives, except for the system drive and the particular drive on which you wish to perform the partition activities, likewise, disconnect any external drives as well. By doing this, you will minimize accidentally doing something to another drive which you did not intend to do.

 

I stupidly did not do this, and instantly regreted not doing so, when I accidentally started an erase function on a drive, only to find to my horror, I had started erasing a drive, which I did not wish, nor wanted to be erased. Fortunately, I quickly realized my ghastly mistake, and was able to stop the erase function. I sent the drive to a company which specializes in data recovery. Fortunately for me, they recovered virtually the entire data on the drive, in  its original organized layout. These companies are sometimes able to recover data from drives, even if the partition has become corrupted in some way.

 

HTH

 

Sincerely:

 

Dave Durber

 

----- Original Message -----

Sent: Tuesday, May 01, 2018 3:50 PM

Subject: Aomi partitioning tool

 

Good morning:

 

Using Jaws and aomin  partitioning tool the menues are accessibil, but you have to use the jaws curser a lot to get around.

 

How can you tell when something is highlited in Jaws.

 

I could not tell if the drive was highlighted I did not want to partition the rong drive.

 

Thank you.

 

 


moderated Re: High Importance E-mail

Michael Mote
 

Hi Tom!  Try Alt H followed by the letter H to see if that works. 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 3:17 PM
To: 'jfw list' <jfw@groups.io>
Subject: High Importance E-mail

 

Hello, everyone.

 

Does anyone know of a key stroke for designating an e-mail as “high importance” in Outlook 2016?

 

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

 

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

 

Thanks as always!

 

Dr.  Tom Behler From Michigan

 

 


moderated Re: High Importance E-mail

Tom Behler
 

Cathyanne:

 

Another list member suggested alt H followed by another H when in the body of the e-mail you wish to send, and it seems to work here.

 

Am using Outlook 2016 with the latest build of Jaws 2018 on a Windows 7 laptop.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of CathyAnne Murtha
Sent: Tuesday, May 01, 2018 4:01 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail

 

I’ve thoroughly explored all the keystrokes for Office 2016 and I don’t believe there is a keystroke for that specific feature. The best you can do is memorize the ribbon key tip and use it.

 

 

CathyAnne

 

 

CathyAnne Murtha

Access Technology Institute, LLC

cathy@...

www.blind.training

(520) 300-7859

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 12:17 PM
To: 'jfw list' <jfw@groups.io>
Subject: High Importance E-mail

 

Hello, everyone.

 

Does anyone know of a key stroke for designating an e-mail as “high importance” in Outlook 2016?

 

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

 

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

 

Thanks as always!

 

Dr.  Tom Behler From Michigan

 

 


moderated Re: High Importance E-mail

CathyAnne Murtha <cathy@...>
 

I’ve thoroughly explored all the keystrokes for Office 2016 and I don’t believe there is a keystroke for that specific feature. The best you can do is memorize the ribbon key tip and use it.

 

 

CathyAnne

 

 

CathyAnne Murtha

Access Technology Institute, LLC

cathy@...

www.blind.training

(520) 300-7859

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Tuesday, May 1, 2018 12:17 PM
To: 'jfw list' <jfw@groups.io>
Subject: High Importance E-mail

 

Hello, everyone.

 

Does anyone know of a key stroke for designating an e-mail as “high importance” in Outlook 2016?

 

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

 

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

 

Thanks as always!

 

Dr.  Tom Behler From Michigan

 

 


moderated Re: High Importance E-mail

Tom Behler
 

Thanks, Ann.

Am I correct in saying that you can do this with an individual message when
needed, after which you default back to the normal importance level?

Tom Behler

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Tuesday, May 01, 2018 3:32 PM
To: main@jfw.groups.io
Subject: Re: High Importance E-mail


Alt-h, then h.
At 02:16 PM 5/1/2018, you wrote:
Hello, everyone.

Does anyone know of a key stroke for designating an e-mail as "high
importance" in Outlook 2016?

I can get to the high importance designation via the menus, but would
like a specific key stroke for doing this if that is available.

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

Thanks as always!

Dr. Tom Behler From Michigan



moderated Re: High Importance E-mail

Ann Byrne
 

Alt-h, then h.

At 02:16 PM 5/1/2018, you wrote:
Hello, everyone.

Does anyone know of a key stroke for designating an e-mail as "high importance" in Outlook 2016?

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

Thanks as always!

Dr. Tom Behler From Michigan



moderated High Importance E-mail

Tom Behler
 

Hello, everyone.

 

Does anyone know of a key stroke for designating an e-mail as “high importance” in Outlook 2016?

 

I can get to the high importance designation via the menus, but would like a specific key stroke for doing this if that is available.

 

Am using the latest build of Jaws 2018 on a windows 7 laptop here.

 

Thanks as always!

 

Dr.  Tom Behler From Michigan

 

 


moderated Re: moving pointer to top corner of dialog box

HH. Smith Jr.
 

Hi Robin,
On a somewhat unrelated topic, I am very interested in the Cisco Jabber and
it's functionality with JAWS as an alternative to the Accessa phone. At this
time, the Accessa Phone is a bit expensive. What is the price of the Cisco
Jabber, if you know? You can email me at
Josham129@...
thanks

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin
via Groups.Io
Sent: Tuesday, May 1, 2018 11:08 AM
To: main@jfw.groups.io
Subject: Re: moving pointer to top corner of dialog box

Pam, the messaging client we use is Cisco Jabber. We also use Cisco WebEx
for meetings and both of these integrate with Outlook and with each other.
I really don't know if I could use either without relying on the bit of
remaining central vision I have, and even that is not enough some times.



-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ekstrand,
Pamela A. -ND
Sent: Monday, April 30, 2018 11:49 AM
To: main@jfw.groups.io
Subject: Re: moving pointer to top corner of dialog box

Robin,

I am curious about which instant messaging client your company uses. It
seems like accessibility is an issue with many of these types of programs,
from what I have seen. Without the add-on scripts available for JAWS,
Microsoft LYNC/Skype for Business would not be accessible.

On a related note, has anyone had success with using Slack?

Pam
________________________________________
From: main@jfw.groups.io [main@jfw.groups.io] on behalf of Van Lant, Robin
via Groups.Io [Robin_Van_Lant@...]
Sent: Monday, April 30, 2018 12:34 PM
To: main@jfw.groups.io
Subject: Re: moving pointer to top corner of dialog box

Sieghard,
I may try this. Bill's information was useful, but I need a few options to
play with. The main program I'm battling with is the instant messaging
client our company uses. It's produced by Cisco Systems and neither Window
Eyes nor JAWS can read it well. I believe it's based on Java. With Window
Eyes, I found that I could put my mouse pointer in the top left corner, then
move the pointer down slightly to get Window Eyes to voice the name of the
person contacting me and or their status. There was no way to get this
voiced except with the Mouse pointer. Then, if I used another key to put my
mouse in the bottom right or left corner, I could move the pointer up
slightly and click once to position my cursor in the message edit field.
Truly, I'm not sure how a totally blind person would work with this program.
I'm using a combination of my bit of remaining central vision and the mouse
echo feature in Window Eyes to use this software. As the last of my central
vision fades, I hope I will have figured out some additional means for
navigating, so maybe the JAWS cursor method, then routing the PC curser
there will help..

Robin




From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard
Weitzel
Sent: Friday, April 27, 2018 4:58 PM
To: main@jfw.groups.io
Subject: Re: moving pointer to top corner of dialog box

Are you using Windows 7 or Windows 10? In Windows 7 NumPad 7 or Home would
move the Jaws cursor to the top right of whatever Window you were in if the
Jaws cursor was activated. This may still be the case in Windows 10 except
in Windows 10 the Jaws cursor does not read very much any more in many
situations, that is just the way Windows 10 works and not the fault of the
Jaws cursor.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin
via Groups.Io
Sent: Friday, April 27, 2018 1:35 PM
To: main@jfw.groups.io
Subject: Re: moving pointer to top corner of dialog box

Interesting and not intuitive. Does that mean that JAWS does not offer the
same kind of screen reviewing that Window Eyes did where I could use keys to
navigate up and down the screen with the pointer? These various modes are
my bigger learning hurdle right now with JAWS.



From: main@jfw.groups.io<mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Bill White
Sent: Friday, April 27, 2018 1:21 PM
To: main@jfw.groups.io<mailto:main@jfw.groups.io>
Subject: Re: moving pointer to top corner of dialog box

I don't know if this is what you're looking for, but there are two
keystrokes in JAWS:

Get top left corner:

CONTROL plus SHIFT plus LEFT BRACKET

Get Bottom Right Corner:

CONTROL plus SHIFT plus RIGHT BRACKET

Bill White
billwhite92701@...<mailto:billwhite92701@...>

From: main@jfw.groups.io<mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Van Lant, Robin via Groups.Io
Sent: Friday, April 27, 2018 9:33 AM
To: JFW list (main@jfw.groups.io<mailto:main@jfw.groups.io>)
Subject: moving pointer to top corner of dialog box

Hi all,
I have a couple programs at work that do not work well with speech. In
Window-Eyes I could put the mouse pointer to the top left of the program
window or dialog box, then arrow down to read some status lines or get close
to the edit fields I need.

With JAWS, I'm getting proficient with routing the JAWS cursor to PC, but I
cannot figure out if there is a way to get my mouse pointer to the top left
or bottom left corners of the focused window. With Window Eyes, I just had
to hit the 7 on the numpad. Is there a method?

Thanks.




This communication may contain privileged and/or confidential information.
It is intended solely for the use of the addressee. If you are not the
intended recipient, you are strictly prohibited from disclosing, copying,
distributing or using any of this information. If you received this
communication in error, please contact the sender immediately and destroy
the material in its entirety, whether electronic or hard copy. This
communication may contain nonpublic personal information about consumers
subject to the restrictions of the Gramm-Leach-Bliley Act. You may not
directly or indirectly reuse or redisclose such information for any purpose
other than to provide the services for which you are receiving the
information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services
from Key send an e-mail to mailto:DNERequests@... with 'No Promotional
E-mails' in the SUBJECT line.


moderated Re: Aomi partitioning tool

Dave Durber
 

Hello Nino:
 
Is the drive you are wishing to perform partition activities, an internal drive?
 
Do you have more than the system drive and this particular drive connected to the computer as internal drives?
 
If So, power off the computer, disconnect all internal drives, except for the system drive and the particular drive on which you wish to perform the partition activities, likewise, disconnect any external drives as well. By doing this, you will minimize accidentally doing something to another drive which you did not intend to do.
 
I stupidly did not do this, and instantly regreted not doing so, when I accidentally started an erase function on a drive, only to find to my horror, I had started erasing a drive, which I did not wish, nor wanted to be erased. Fortunately, I quickly realized my ghastly mistake, and was able to stop the erase function. I sent the drive to a company which specializes in data recovery. Fortunately for me, they recovered virtually the entire data on the drive, in  its original organized layout. These companies are sometimes able to recover data from drives, even if the partition has become corrupted in some way.
 
HTH
 
Sincerely:
 
Dave Durber
 

----- Original Message -----
Sent: Tuesday, May 01, 2018 3:50 PM
Subject: Aomi partitioning tool

Good morning:

 

Using Jaws and aomin  partitioning tool the menues are accessibil, but you have to use the jaws curser a lot to get around.

 

How can you tell when something is highlited in Jaws.

 

I could not tell if the drive was highlighted I did not want to partition the rong drive.

 

Thank you.

 

 

41881 - 41900 of 100824