Date   

moderated Re: MOVING MESSAGES IN WINDOWS MAIL

netbat66
 

i have the preview pane off. so i can move messages in the list with the messages closed.
highlight the messages, open a context menu and use move. then arrow to the folder where you want to move it and press enter on the folder. you can do this to move or copy a message. but wait a few seconds. it may seam the message is still there in the original folder and if you try to delete it before it has been moved it will go to the deleted folder instead.

-----Original Message-----
From: Shirley Tracy
Sent: Friday, April 27, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: MOVING MESSAGES IN WINDOWS MAIL



Ashleigh,



Thank you. I’ll try it now, and if you don’t hear back from me, it’s because it worked. 😊



Cheerfully,





Shirley Tracy





From: Ashleigh Piccinino
Sent: Friday, April 27, 2018 3:40 PM
To: main@jfw.groups.io
Subject: Re: MOVING MESSAGES IN WINDOWS MAIL
Importance: High





Hello,

You can, when the message is opened, move it with the following keys. CTRL alt and v will get one into the move dialogue, and tab to “all folders” if you’ve not landed on that first. Arrow up and down until you get to your desired folder, and press enter. To check that the message is moved, tab to the folders button. Of course, all this assumes you’re using the mail app. Go to the folder desired/where you moved the message and check if it’s there. In outlook 2016, and without opening the message, CTRL alt and v still moves your message. Only this time, you’re in the inbox itself and don’t have to go to all folders. Up and down arrow until you reach the folder of choice to move to. Press enter, and you’ve got it. To check, press CTRL y to get into your tree view of folders. If you’ve placed the message into an inbox folder, right arrow to open the inbox submenu if it’s not already done first. JAWS will say “inbox”, the number of messages inside and either closed or open. Need any more help? Don’t hesitate to write me off list or write to the group as well.,

Thank you,

Ashleigh S. Piccinino



Sent from Mail for Windows 10







From: main@jfw.groups.io <main@jfw.groups.io> on behalf of Shirley Tracy <stracy5@...>
Sent: Friday, April 27, 2018 2:28:58 PM
To: main@jfw.groups.io
Subject: MOVING MESSAGES IN WINDOWS MAIL







`Hi everyone,



How do I move a message from my INBOX to another folder using JAWS? Is there a key stroke that does it?



Thanks for any help.


moderated Re: MOVING MESSAGES IN WINDOWS MAIL

Shirley Tracy
 

Ashleigh,

 

Thank you. I’ll try it now, and if you don’t hear back from me, it’s because it worked. 😊

 

Cheerfully,

 

Shirley Tracy

 

From: Ashleigh Piccinino
Sent: Friday, April 27, 2018 3:40 PM
To: main@jfw.groups.io
Subject: Re: MOVING MESSAGES IN WINDOWS MAIL
Importance: High

 

Hello,

You can, when the message is opened, move it with the following keys. CTRL alt and v will get one into the move dialogue, and tab to “all folders” if you’ve not landed on that first. Arrow up and down until you get to your desired folder, and press enter. To check that the message is moved, tab to the folders button. Of course, all this assumes you’re using the mail app. Go to the folder desired/where you moved the message and check if it’s there. In outlook 2016, and without opening the message, CTRL alt and v still moves your message. Only this time, you’re in the inbox itself and don’t have to go to all folders. Up and down arrow until you reach the folder of choice to move to. Press enter, and you’ve got it. To check, press CTRL y to get into your tree view of folders. If you’ve placed the message into an inbox folder, right arrow to open the inbox submenu if it’s not already done first. JAWS will say “inbox”, the number of messages inside and either closed or open. Need any more help? Don’t hesitate to write me off list or write to the group as well.,

Thank you,

Ashleigh S. Piccinino

 

Sent from Mail for Windows 10

 

From: main@jfw.groups.io <main@jfw.groups.io> on behalf of Shirley Tracy <stracy5@...>
Sent: Friday, April 27, 2018 2:28:58 PM
To: main@jfw.groups.io
Subject: MOVING MESSAGES IN WINDOWS MAIL

 

`Hi everyone,

 

How do I move a message from my INBOX to another folder using JAWS? Is there a key stroke that does it?

 

Thanks for any help.

 


moderated Re: MOVING MESSAGES IN WINDOWS MAIL

Ashleigh Piccinino
 

Hello,

You can, when the message is opened, move it with the following keys. CTRL alt and v will get one into the move dialogue, and tab to “all folders” if you’ve not landed on that first. Arrow up and down until you get to your desired folder, and press enter. To check that the message is moved, tab to the folders button. Of course, all this assumes you’re using the mail app. Go to the folder desired/where you moved the message and check if it’s there. In outlook 2016, and without opening the message, CTRL alt and v still moves your message. Only this time, you’re in the inbox itself and don’t have to go to all folders. Up and down arrow until you reach the folder of choice to move to. Press enter, and you’ve got it. To check, press CTRL y to get into your tree view of folders. If you’ve placed the message into an inbox folder, right arrow to open the inbox submenu if it’s not already done first. JAWS will say “inbox”, the number of messages inside and either closed or open. Need any more help? Don’t hesitate to write me off list or write to the group as well.,

Thank you,

Ashleigh S. Piccinino

 

Sent from Mail for Windows 10

 


From: main@jfw.groups.io <main@jfw.groups.io> on behalf of Shirley Tracy <stracy5@...>
Sent: Friday, April 27, 2018 2:28:58 PM
To: main@jfw.groups.io
Subject: MOVING MESSAGES IN WINDOWS MAIL
 

`Hi everyone,

 

How do I move a message from my INBOX to another folder using JAWS? Is there a key stroke that does it?

 

Thanks for any help.


moderated MOVING MESSAGES IN WINDOWS MAIL

Shirley Tracy
 

`Hi everyone,

 

How do I move a message from my INBOX to another folder using JAWS? Is there a key stroke that does it?

 

Thanks for any help.


moderated Re: moving pointer to top corner of dialog box

Bill White <billwhite92701@...>
 

I don’t know if this is what you’re looking for, but there are two keystrokes in JAWS:

 

Get top left corner:

 

CONTROL plus SHIFT plus LEFT BRACKET

 

Get Bottom Right Corner:

 

CONTROL plus SHIFT plus RIGHT BRACKET

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Van Lant, Robin via Groups.Io
Sent: Friday, April 27, 2018 9:33 AM
To: JFW list (main@jfw.groups.io)
Subject: moving pointer to top corner of dialog box

 

Hi all,

I have a couple programs at work that do not work well with speech.  In Window-Eyes I could put the mouse pointer to the top left of the program window or dialog box, then arrow down to read some status lines or get close to the edit fields I need. 

 

With JAWS, I’m getting proficient with routing the JAWS cursor to PC, but I cannot figure out if there is a way to get my mouse pointer to the top left or bottom left corners of the focused window.  With Window Eyes, I just had to hit the 7 on the numpad.  Is there a method?

 

Thanks.

 

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: JAWS friendly way to translate English into Spanish.

Tim Ford
 

I somehow missed your mention of the Word tool.  Is that included in Word 2010, the version I have?

 

How do I get to the

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Cristóbal
Sent: Friday, April 27, 2018 11:45 AM
To: main@jfw.groups.io
Subject: Re: JAWS friendly way to translate English into Spanish.

 

The main English language site is: http://www.spanish-translator-services.com/

You may have to poke around to get to the same page for typing in text as Spanish, but it’s there. I simpy haven’t used it since I can do both from the Spanish language site.

You could pass along the Spanish language site to your friend.

Also, like I said, Microsoft’s translating tool for Word is actually pretty good too.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tim Ford
Sent: Friday, April 27, 2018 11:11 AM
To: main@jfw.groups.io
Subject: Re: JAWS friendly way to translate English into Spanish.

 

Yes I did, and I thought I responded to let you know I appreciated your responding.  The web site was all in Spanish, and I assumed, perhaps incorrectly, that there was not an English version.  If I was too hasty in concluding the site was not what I could use, would you be so kind as to send that info to me again?

 

Sincerely,

Tim Ford

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Cristóbal
Sent: Friday, April 27, 2018 10:57 AM
To: main@jfw.groups.io
Subject: Re: JAWS friendly way to translate English into Spanish.

 

Did you by any chance get my response?

 

 

From: Cristóbal]
Sent: Thursday, April 19, 2018 9:53 PM
To: main@jfw.groups.io
Subject: RE: JAWS friendly way to translate English into Spanish.

 

My work is mainly focused in interpreting, but for the occasional translating stuff, I’ll go lazy and use this site: http://www.spanish-translator-services.com/espanol/traductor-gratis.htm

It’s actually pretty solid. The Microsoft built in translator is also surprisingly good. ProZ.com works too, but that site is a little more funky to get around in with a screen reader last I tried.

Keeping in mind other factors like localization and register. I.E. The Spanish spoken in Mexico or Argentina, Cuba, Spain, etc will vary in idioms/slang and the level of education and so on.

The services I mentioned above are good for a foundation to work off of, but for more formal translation work, it’s not just a copy and paste job. You have to know what you’re talking about. But for casual communication or in a pinch, they’d more or less get the job done.

This is off the PC of course. The Google translate iOS app would be my choice for mobile, but they for whatever reason only offer Castilian Spanish which for the Latin American Spanish ear can be . . . tedious to listen to. That probably wouldn’t matter in this case though.

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tim Ford
Sent: Friday, April 27, 2018 10:53 AM
To: JAWS-Users-List <jaws-users-list-bounces@...>; jfw@groups.io
Subject: JAWS friendly way to translate English into Spanish.

 

 

Hello All,

 

I posted this request back a couple of weeks ago.  The one response I did get was not what I needed.  In posting again, and with my apologies, I am hopeful someone can help. 

 

I am using JAWS 17 with Windows 10.  I have a friend whose English is no better than my Spanish.  Is there a web site, Word feature, stand-alone software, or some other way for she and I to type and hit a button to translate?  It could be just reading the screen, or better yet, a button to press to have the computer speak the translation.  Any ideas are much appreciated!

 

Sincerely,

Tim Ford

 


moderated Re: JAWS friendly way to translate English into Spanish.

Cristóbal
 

The main English language site is: http://www.spanish-translator-services.com/

You may have to poke around to get to the same page for typing in text as Spanish, but it’s there. I simpy haven’t used it since I can do both from the Spanish language site.

You could pass along the Spanish language site to your friend.

Also, like I said, Microsoft’s translating tool for Word is actually pretty good too.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tim Ford
Sent: Friday, April 27, 2018 11:11 AM
To: main@jfw.groups.io
Subject: Re: JAWS friendly way to translate English into Spanish.

 

Yes I did, and I thought I responded to let you know I appreciated your responding.  The web site was all in Spanish, and I assumed, perhaps incorrectly, that there was not an English version.  If I was too hasty in concluding the site was not what I could use, would you be so kind as to send that info to me again?

 

Sincerely,

Tim Ford

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Cristóbal
Sent: Friday, April 27, 2018 10:57 AM
To: main@jfw.groups.io
Subject: Re: JAWS friendly way to translate English into Spanish.

 

Did you by any chance get my response?

 

 

From: Cristóbal]
Sent: Thursday, April 19, 2018 9:53 PM
To: main@jfw.groups.io
Subject: RE: JAWS friendly way to translate English into Spanish.

 

My work is mainly focused in interpreting, but for the occasional translating stuff, I’ll go lazy and use this site: http://www.spanish-translator-services.com/espanol/traductor-gratis.htm

It’s actually pretty solid. The Microsoft built in translator is also surprisingly good. ProZ.com works too, but that site is a little more funky to get around in with a screen reader last I tried.

Keeping in mind other factors like localization and register. I.E. The Spanish spoken in Mexico or Argentina, Cuba, Spain, etc will vary in idioms/slang and the level of education and so on.

The services I mentioned above are good for a foundation to work off of, but for more formal translation work, it’s not just a copy and paste job. You have to know what you’re talking about. But for casual communication or in a pinch, they’d more or less get the job done.

This is off the PC of course. The Google translate iOS app would be my choice for mobile, but they for whatever reason only offer Castilian Spanish which for the Latin American Spanish ear can be . . . tedious to listen to. That probably wouldn’t matter in this case though.

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tim Ford
Sent: Friday, April 27, 2018 10:53 AM
To: JAWS-Users-List <jaws-users-list-bounces@...>; jfw@groups.io
Subject: JAWS friendly way to translate English into Spanish.

 

 

Hello All,

 

I posted this request back a couple of weeks ago.  The one response I did get was not what I needed.  In posting again, and with my apologies, I am hopeful someone can help. 

 

I am using JAWS 17 with Windows 10.  I have a friend whose English is no better than my Spanish.  Is there a web site, Word feature, stand-alone software, or some other way for she and I to type and hit a button to translate?  It could be just reading the screen, or better yet, a button to press to have the computer speak the translation.  Any ideas are much appreciated!

 

Sincerely,

Tim Ford

 


moderated Re: JAWS friendly way to translate English into Spanish.

Tim Ford
 

Yes I did, and I thought I responded to let you know I appreciated your responding.  The web site was all in Spanish, and I assumed, perhaps incorrectly, that there was not an English version.  If I was too hasty in concluding the site was not what I could use, would you be so kind as to send that info to me again?

 

Sincerely,

Tim Ford

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Cristóbal
Sent: Friday, April 27, 2018 10:57 AM
To: main@jfw.groups.io
Subject: Re: JAWS friendly way to translate English into Spanish.

 

Did you by any chance get my response?

 

 

From: Cristóbal]
Sent: Thursday, April 19, 2018 9:53 PM
To: main@jfw.groups.io
Subject: RE: JAWS friendly way to translate English into Spanish.

 

My work is mainly focused in interpreting, but for the occasional translating stuff, I’ll go lazy and use this site: http://www.spanish-translator-services.com/espanol/traductor-gratis.htm

It’s actually pretty solid. The Microsoft built in translator is also surprisingly good. ProZ.com works too, but that site is a little more funky to get around in with a screen reader last I tried.

Keeping in mind other factors like localization and register. I.E. The Spanish spoken in Mexico or Argentina, Cuba, Spain, etc will vary in idioms/slang and the level of education and so on.

The services I mentioned above are good for a foundation to work off of, but for more formal translation work, it’s not just a copy and paste job. You have to know what you’re talking about. But for casual communication or in a pinch, they’d more or less get the job done.

This is off the PC of course. The Google translate iOS app would be my choice for mobile, but they for whatever reason only offer Castilian Spanish which for the Latin American Spanish ear can be . . . tedious to listen to. That probably wouldn’t matter in this case though.

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tim Ford
Sent: Friday, April 27, 2018 10:53 AM
To: JAWS-Users-List <jaws-users-list-bounces@...>; jfw@groups.io
Subject: JAWS friendly way to translate English into Spanish.

 

 

Hello All,

 

I posted this request back a couple of weeks ago.  The one response I did get was not what I needed.  In posting again, and with my apologies, I am hopeful someone can help. 

 

I am using JAWS 17 with Windows 10.  I have a friend whose English is no better than my Spanish.  Is there a web site, Word feature, stand-alone software, or some other way for she and I to type and hit a button to translate?  It could be just reading the screen, or better yet, a button to press to have the computer speak the translation.  Any ideas are much appreciated!

 

Sincerely,

Tim Ford

 


moderated Re: JAWS friendly way to translate English into Spanish.

Cristóbal
 

Did you by any chance get my response?

 

 

From: Cristóbal]
Sent: Thursday, April 19, 2018 9:53 PM
To: main@jfw.groups.io
Subject: RE: JAWS friendly way to translate English into Spanish.

 

My work is mainly focused in interpreting, but for the occasional translating stuff, I’ll go lazy and use this site: http://www.spanish-translator-services.com/espanol/traductor-gratis.htm

It’s actually pretty solid. The Microsoft built in translator is also surprisingly good. ProZ.com works too, but that site is a little more funky to get around in with a screen reader last I tried.

Keeping in mind other factors like localization and register. I.E. The Spanish spoken in Mexico or Argentina, Cuba, Spain, etc will vary in idioms/slang and the level of education and so on.

The services I mentioned above are good for a foundation to work off of, but for more formal translation work, it’s not just a copy and paste job. You have to know what you’re talking about. But for casual communication or in a pinch, they’d more or less get the job done.

This is off the PC of course. The Google translate iOS app would be my choice for mobile, but they for whatever reason only offer Castilian Spanish which for the Latin American Spanish ear can be . . . tedious to listen to. That probably wouldn’t matter in this case though.

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tim Ford
Sent: Friday, April 27, 2018 10:53 AM
To: JAWS-Users-List <jaws-users-list-bounces@...>; jfw@groups.io
Subject: JAWS friendly way to translate English into Spanish.

 

 

Hello All,

 

I posted this request back a couple of weeks ago.  The one response I did get was not what I needed.  In posting again, and with my apologies, I am hopeful someone can help. 

 

I am using JAWS 17 with Windows 10.  I have a friend whose English is no better than my Spanish.  Is there a web site, Word feature, stand-alone software, or some other way for she and I to type and hit a button to translate?  It could be just reading the screen, or better yet, a button to press to have the computer speak the translation.  Any ideas are much appreciated!

 

Sincerely,

Tim Ford

 


moderated JAWS friendly way to translate English into Spanish.

Tim Ford
 

 

Hello All,

 

I posted this request back a couple of weeks ago.  The one response I did get was not what I needed.  In posting again, and with my apologies, I am hopeful someone can help. 

 

I am using JAWS 17 with Windows 10.  I have a friend whose English is no better than my Spanish.  Is there a web site, Word feature, stand-alone software, or some other way for she and I to type and hit a button to translate?  It could be just reading the screen, or better yet, a button to press to have the computer speak the translation.  Any ideas are much appreciated!

 

Sincerely,

Tim Ford

 


moderated JAWS and Online Calendars

Vaughn Brown
 

Hello,

At work I am using JAWS 18 and Windows 10. In the software that I am
using, Clear Care, I am wanting to see which caregiver is assigned on
a specific day. The calendar is set up in a table and column format. A
sighted person can look at a day and see the assigned person under
that day. JAWS is able to read the day and date but reads the times
and caregivers in clusters at the bottom.
I tried using the smart navigation function for reading tables and I
am experimenting on left-mouse clocking on the actual day but not sure
if this helping entirely.
If there are suggestions I would sincerely appreciate it. Thank you
all, and have a nice weekend.

Vaughn


moderated JAWS focus issue with Windows Sticky Notes

Van Lant, Robin
 

I’m using JAWS 2018 with Windows 7 and I have loved using the Sticky Notes feature in Windows to capture my reminders list.  With Windows-Eyes I had no issues, but with JAWS I am having focus issues where JAWS will read the line I’m on, then immediately read some lines from further up on the sticky note.  Sticky Notes is such a simple little program that I’m really surprised to have focus issues.  Anyone else tried this and have these issues?   You can just type Sticky in the search box and it will come up. 

 

Robin’

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated moving pointer to top corner of dialog box

Van Lant, Robin
 

Hi all,

I have a couple programs at work that do not work well with speech.  In Window-Eyes I could put the mouse pointer to the top left of the program window or dialog box, then arrow down to read some status lines or get close to the edit fields I need. 

 

With JAWS, I’m getting proficient with routing the JAWS cursor to PC, but I cannot figure out if there is a way to get my mouse pointer to the top left or bottom left corners of the focused window.  With Window Eyes, I just had to hit the 7 on the numpad.  Is there a method?

 

Thanks.

 

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: Software to convert scanned images to PDF files

Debby Hill
 

Sorry this might not be of much help, but I have a Canon MF416 and it does
have a scan utility that can save in PDF. You can do an image file or have
OCR. However, I am not sure about the formatting. When I have used it, I
haven't been that interested in the formatting.

Debby

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard
Weitzel
Sent: Thursday, April 26, 2018 11:14 PM
To: main@jfw.groups.io
Subject: Re: Software to convert scanned images to PDF files

I just looked it up and it says it comes with a scan utility. You would
probably be better of trying to use it rather than Windows Fax and Scan.
There is a good chance that this scan application will let you save in PDF.

Regards,
Siegharrd


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Thursday, April 26, 2018 2:22 PM
To: main@jfw.groups.io
Subject: Re: Software to convert scanned images to PDF files

The machine I have is a Canon MG 2500. It is a printer, scanner,
photocopier.

I purchased it a week ago. I haven't had much time to learn how to use the
software, let alone get to use the thing.

Sincerely:

Dave Durber

----- Original Message -----
From: "Sieghard Weitzel" <sieghard@...>
To: <main@jfw.groups.io>
Sent: Thursday, April 26, 2018 3:51 PM
Subject: Re: Software to convert scanned images to PDF files


What brand and model of scanner do you have? Most scanners these days come
with software where you can choose whether you want to save your scanned
image in JPG or PDF, PDF nowadays is much more common.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Thursday, April 26, 2018 7:38 AM
To: main@jfw.groups.io
Subject: Software to convert scanned images to PDF files

Hello everyone:

I need to scan some documents and send them as pDF files.

Does anyone on the list know of a software package which is accessible and
can do what I am wanting to do and keep the original format and layout.

I used the Windows Fax and Scan program without much success.

Thank you all in advance for any and all suggestions.

Sincerely:

Dave Durber


moderated Re: Software to convert scanned images to PDF files

Sieghard Weitzel <sieghard@...>
 

I just looked it up and it says it comes with a scan utility. You would probably be better of trying to use it rather than Windows Fax and Scan.
There is a good chance that this scan application will let you save in PDF.

Regards,
Siegharrd

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Thursday, April 26, 2018 2:22 PM
To: main@jfw.groups.io
Subject: Re: Software to convert scanned images to PDF files

The machine I have is a Canon MG 2500. It is a printer, scanner, photocopier.

I purchased it a week ago. I haven't had much time to learn how to use the software, let alone get to use the thing.

Sincerely:

Dave Durber

----- Original Message -----
From: "Sieghard Weitzel" <sieghard@...>
To: <main@jfw.groups.io>
Sent: Thursday, April 26, 2018 3:51 PM
Subject: Re: Software to convert scanned images to PDF files


What brand and model of scanner do you have? Most scanners these days come
with software where you can choose whether you want to save your scanned
image in JPG or PDF, PDF nowadays is much more common.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Thursday, April 26, 2018 7:38 AM
To: main@jfw.groups.io
Subject: Software to convert scanned images to PDF files

Hello everyone:

I need to scan some documents and send them as pDF files.

Does anyone on the list know of a software package which is accessible and
can do what I am wanting to do and keep the original format and layout.

I used the Windows Fax and Scan program without much success.

Thank you all in advance for any and all suggestions.

Sincerely:

Dave Durber


moderated Re: Jaws speaking the word "bullet" before some links.

Betsy Binney
 

Typically bullets indicate a list. They are part of a web design element and can’t be changed by others.

Betsy R. Binney

On Apr 26, 2018, at 6:15 PM, Carolyn Arnold <4carolyna@...> wrote:

Oh yes. I have none checked, but I always hear about bullets. Could be that they are considered graphics and not punctuation.

Best regards,

Carolyn


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of bob jutzi
Sent: Thursday, April 26, 2018 2:50 PM
To: jaws <main@jfw.groups.io>
Subject: Jaws speaking the word "bullet" before some links.

For the most part, I finally managed to disable speaking of punctuation when browsing sites; however, Jaws still speaks the word "bullet" before some links. Is this something that can be disabled?








moderated Re: Jaws speaking the word "bullet" before some links.

Carolyn Arnold <4carolyna@...>
 

Oh yes. I have none checked, but I always hear about bullets. Could be that they are considered graphics and not punctuation.

Best regards,

Carolyn

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of bob jutzi
Sent: Thursday, April 26, 2018 2:50 PM
To: jaws <main@jfw.groups.io>
Subject: Jaws speaking the word "bullet" before some links.

For the most part, I finally managed to disable speaking of punctuation when browsing sites; however, Jaws still speaks the word "bullet" before some links. Is this something that can be disabled?


moderated Re: Software to convert scanned images to PDF files

Dave Durber
 

The latest version of MS Word I have is contained in Office 10.

Sincerely:

Dave Durber

----- Original Message -----
From: "george b" <gbmagoo@...>
To: <main@jfw.groups.io>
Sent: Thursday, April 26, 2018 4:05 PM
Subject: Re: Software to convert scanned images to PDF files


Also if you can scan to word and you have the latest 2016 version it will
let you save word docs into p d f

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: April 26, 2018 7:54
To: main@jfw.groups.io
Subject: Re: Software to convert scanned images to PDF files

What format are the scans in? If they are JPG you could just Google "JPG to
PDF converters" and you'll find a ton of online converters most of which are
very accessible. You just click some button to upload your JPG file, then if
PDF is already selected as the output format (most of them let you convert
all sorts of things) then you click the "Convert" button and finally you
download your converted PDF image. There are of course also desktop
applications out there, but many of them might cost a bit and often they may
be less accessible. Unless you have to convert large numbers of files and
are unable to scan directly to PDF the online converters are the way to go.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Thursday, April 26, 2018 7:38 AM
To: main@jfw.groups.io
Subject: Software to convert scanned images to PDF files

Hello everyone:

I need to scan some documents and send them as pDF files.

Does anyone on the list know of a software package which is accessible and
can do what I am wanting to do and keep the original format and layout.

I used the Windows Fax and Scan program without much success.

Thank you all in advance for any and all suggestions.

Sincerely:

Dave Durber











moderated Re: Software to convert scanned images to PDF files

Dave Durber
 

I need to scan several sheets of paper. As I said previously, up till now, I have been using the Fax/Scanner software, which is installed with Windows. Unfortunately, the results, have varied enormously.

Sincerely:

Dave Durber

----- Original Message -----
From: "Sieghard Weitzel" <sieghard@...>
To: <main@jfw.groups.io>
Sent: Thursday, April 26, 2018 3:53 PM
Subject: Re: Software to convert scanned images to PDF files


What format are the scans in? If they are JPG you could just Google "JPG to PDF converters" and you'll find a ton of online converters most of which are very accessible. You just click some button to upload your JPG file, then if PDF is already selected as the output format (most of them let you convert all sorts of things) then you click the "Convert" button and finally you download your converted PDF image. There are of course also desktop applications out there, but many of them might cost a bit and often they may be less accessible. Unless you have to convert large numbers of files and are unable to scan directly to PDF the online converters are the way to go.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Thursday, April 26, 2018 7:38 AM
To: main@jfw.groups.io
Subject: Software to convert scanned images to PDF files

Hello everyone:

I need to scan some documents and send them as pDF files.

Does anyone on the list know of a software package which is accessible and can do what I am wanting to do and keep the original format and layout.

I used the Windows Fax and Scan program without much success.

Thank you all in advance for any and all suggestions.

Sincerely:

Dave Durber


moderated Re: Software to convert scanned images to PDF files

Dave Durber
 

The machine I have is a Canon MG 2500. It is a printer, scanner, photocopier.

I purchased it a week ago. I haven't had much time to learn how to use the software, let alone get to use the thing.

Sincerely:

Dave Durber

----- Original Message -----
From: "Sieghard Weitzel" <sieghard@...>
To: <main@jfw.groups.io>
Sent: Thursday, April 26, 2018 3:51 PM
Subject: Re: Software to convert scanned images to PDF files


What brand and model of scanner do you have? Most scanners these days come with software where you can choose whether you want to save your scanned image in JPG or PDF, PDF nowadays is much more common.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Thursday, April 26, 2018 7:38 AM
To: main@jfw.groups.io
Subject: Software to convert scanned images to PDF files

Hello everyone:

I need to scan some documents and send them as pDF files.

Does anyone on the list know of a software package which is accessible and can do what I am wanting to do and keep the original format and layout.

I used the Windows Fax and Scan program without much success.

Thank you all in advance for any and all suggestions.

Sincerely:

Dave Durber