Date   

moderated Re: Adding favorites in internet explorer with jaws 2018 and windows 7

george b <gbmagoo@...>
 

Wow maybe you should tell us the steps you use so we can help you we’re not mind readers

On Apr 8, 2018, at 05:23, John J. Fioravanti, Jr. <fioresq1@...> wrote:

Hi: I installed a new hard drive recently; and when I find a website I like, I go to add a favorite . . . ... It won't allow me to do it and just returns to the website. This never happened to me before. Any suggestions?
Thank you.

-----Original Message-----





moderated Adding favorites in internet explorer with jaws 2018 and windows 7

John J. Fioravanti, Jr.
 

Hi: I installed a new hard drive recently; and when I find a website I like, I go to add a favorite . . . ... It won't allow me to do it and just returns to the website. This never happened to me before. Any suggestions?
Thank you.

-----Original Message-----


moderated Re: tips on using share point, teams, and groups

Chris Chaffin
 


I also would like any help with this.  I have Sharepoint at work, and have problems running Jaws 17 and Windows 7.

Chris


On Apr 7, 2018, at 11:22 PM, Richard Turner <richardturner42@...> wrote:

Judy, I'm also copying the Jaws list.
Judy is asking about working with SharePoint and Jaws along with Office 365. I use Office 365, but not with SharePoint, so I am hoping someone on the list can help.
Richard



“The secret is not to make your music louder, but to make the world quieter.” 

- Mitch Albom from The Magic Strings of Frankie Presto, page 1


On Apr 7, 2018, at 6:56 PM, Judy Redlich <jredlich@...> wrote:

Hi Richard,

I joined the Jaws help list about 5 days ago and have been learning from many of the topics there.  I tried to post the following question, but for some reason it never showed up.  I am writing you off list because you might have a much better handle on 365 than I do.  Also, you might know some others who might be able to help me with my questions below.

Thanks much.

 

I use 365 at work.  How do you best navigate teams, groups, share point in Jaws.  I understand the concept, just need to know how to use each.  Are the use of calendars, planners, one note, and mail the same as they are in regular outlook?  Is there a hot key chart for using these?

Thanks.

Judy

 

 

<image001.jpg>

Judy Redlich

Church Relations Manager, Joni and Friends – Missouri

Joni and Friends International Disability Center

Local office: P.O. Box 190884

St. Louis, MO 63119

Office: 314.773.5664

www.joniandfriends.org/missouri

www.facebook.com/JoniandFriendsMissouri

<image002.gif><image003.gif><image004.jpg><image005.png>

 

An irresistible church is an authentic community built on the hope of Christ that compels people with disabilities to fully belong

 


moderated cannot install web visum

Marvin Hunkin <neilmarvin@...>
 

Hi, trying to install web visum, and got firefox esr 52. Latest update, 52. But it keeps  me the install panel. Does not allow me to install, even though got an eception set up. Any one had any issues. Or is there a newer version, and did try installing a newer version and adding it to firefox, downloaded, said it instlled. But never installed. If web visum is not be updated or developed. Are there any other good free web captures. For jaws. Don’t have a credit card, so a paid option is not possible.

Thanks.showoing


Virus-free. www.avast.com


moderated Re: jaws 218 online tax filing

Brad Martin
 

I prepare lots of tax returns for people as a volunteer tax preparer. Assuming you're in the U.S., I can tell you that:

MyFreeTaxes from United Way if free if your income is less than $66,000. I haven't used it this year, but for the past five or six years at least, it's always been very accessible. It uses H&R Block Premium, so I would assume H&R Block should work with it as well. But you can't beat that free thing if your income is below the limit ($66,000). Now that I think of it, I have a friend who is blind who uses MyFreeTaxes every year and has not complained of any issues this year. I know he already filed his taxes.


In my work, we use a "pro" version of TaxSlayer, but even when they were first building the "pro" version, it was always very very accessible. And since the "Pro" version is almost certainly based on the home user's version, I would believe TaxSlayer would also be very easy to use with JAWS.


For what it's worth, I've never had to use a particular browser with either product. I'm using JAWS 15, and I've not found any issues with either MyFreeTaxes.com or TaxSlayer using Firefox or Internet Explorer.


Brad



On 4/7/2018 1:12 PM, Jim Ruby wrote:
Hi, I am curious for those of you who filed online what service did you use
and how did you find the access with jaws or other screen readers?

Thanks.







moderated Re: Word2016, JFW17, and Creating an Outline

Ann Byrne
 

Word will do it for you.

Type the first Roman number, then tab once to put in your information and press enter
Most likely, Word will give you II after you press enter. Tab once, and Word will give you A. Fill in that line and press enter, and you will have B. Then C. and so on.

When you want another Roman number, press shift+tab, and I believe Word will fill in the II.

Good luck!


moderated Re: tips on using share point, teams, and groups

Richard Turner
 

Judy, I'm also copying the Jaws list.
Judy is asking about working with SharePoint and Jaws along with Office 365. I use Office 365, but not with SharePoint, so I am hoping someone on the list can help.
Richard



“The secret is not to make your music louder, but to make the world quieter.” 

- Mitch Albom from The Magic Strings of Frankie Presto, page 1


On Apr 7, 2018, at 6:56 PM, Judy Redlich <jredlich@...> wrote:

Hi Richard,

I joined the Jaws help list about 5 days ago and have been learning from many of the topics there.  I tried to post the following question, but for some reason it never showed up.  I am writing you off list because you might have a much better handle on 365 than I do.  Also, you might know some others who might be able to help me with my questions below.

Thanks much.

 

I use 365 at work.  How do you best navigate teams, groups, share point in Jaws.  I understand the concept, just need to know how to use each.  Are the use of calendars, planners, one note, and mail the same as they are in regular outlook?  Is there a hot key chart for using these?

Thanks.

Judy

 

 

<image001.jpg>

Judy Redlich

Church Relations Manager, Joni and Friends – Missouri

Joni and Friends International Disability Center

Local office: P.O. Box 190884

St. Louis, MO 63119

Office: 314.773.5664

www.joniandfriends.org/missouri

www.facebook.com/JoniandFriendsMissouri

<image002.gif><image003.gif><image004.jpg><image005.png>

 

An irresistible church is an authentic community built on the hope of Christ that compels people with disabilities to fully belong

 


moderated Re: new to Jaws

kevin meyers
 

Dan, I just sent an email asking if Richard would like to talk via direct email. Would you be interested to talk about your VR and what it offers?

 

Cheers,

 

Kevin

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dan Longmore
Sent: Saturday, April 07, 2018 12:21 PM
To: main@jfw.groups.io
Subject: Re: new to Jaws

 

Tom,

  Wow,  I am in PA and here we have a department with VR just for assisting blind and visually impared with work, training and the like.  Does your state have such a department?  Most do.  Also, if your former employer did not attempt to make reasonable accomadations  for your work, such as purchasing ZT for your job, then they have violated the federal “reasonable accommodation act” under ADA.  Many employers are either not aware of the law or hope you are not. 

I had partial sight until 2014 and then went totally blind and made the jump to JAWS.  There was and is a learning curve but there are many helps within the program and I have basically trained myself.  It gets easier with practice.  Give yourself time to work with Fusion.

 

Dan

  If I can be of more help you can private message me

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Coburn
Sent: Friday, April 6, 2018 9:53 AM
To: main@jfw.groups.io
Subject: new to Jaws

 

hi everyone,

 

I have a Fusion 11 home license that i want to upgrade to fusion 2018,  but i don’t have the $200 all at once,  because I lost my job in february.

 

i lost my job with DXC technologies because the place i worked for took zoomtext off my computer.  I had a corporate workstation & company wouldmt pay the bill for a corporate license.   how much does the corporate license cost?   I don’t even know they wouldn’t tell me for sure?  

 

anyway,  this just goes to prove fusion is the perfect priduct for me because i have a smidgen of sight left but not enough to read print anymore.  i mean i can at very high magnification levels but i really need speech to distingquish beteeen 8’s & 6’s & some other letters & numbers. I’ve been trying to make the transition from zoomtext to jaws but jaws is still very confusing to me.   do you guys have any suggestions how to make the transition easier?  even with a fusion 11 home license i know zoomtext real well but Jaws I don’t really get at all & I don’t know where to go for help especially now that I’m unemployed and VR won’t help me.

 

VR has this new stupid rule that blindness no longer enough disabled to be a VR client no more so no one will help me.  

 

thanks, 

 

Tom Coburn


moderated Re: new to Jaws

kevin meyers
 

Richard,

 

I live in Wisconsin and working with VR to help me find a job. I was let go by the insurance company I worked for 15 years. You said that you work for a commission for the blind. What do you do?

 

 

I wonder if we should talk about this direct emails. My email is kman2020@....

 

Cheers,

 

Kevin

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, April 07, 2018 1:25 PM
To: main@jfw.groups.io
Subject: Re: new to Jaws

 

 

Tom, You absolutely qualify for VR. What State do you live in?

every State should have a group within VR that focuses on people who are blind or low-Vision. In some states I know they are merged within the larger VR agency, but blindness absolutely is covered.

I know this as a person who is blind working for a Commission for the Blind which is under VR.

Contact both of your Senator's offices for your State, assuming you are in the United States anyway.

You should also have a group that deals with Disability Rights. But you certainly could call the ADA information line at (800) 949-4232. 

 

Richard

 

 

 

“The secret is not to make your music louder, but to make the world quieter.” 

- Mitch Albom from The Magic Strings of Frankie Presto, page 1


On Apr 7, 2018, at 10:21 AM, Dan Longmore <danlongmore44@...> wrote:

Tom,

  Wow,  I am in PA and here we have a department with VR just for assisting blind and visually impared with work, training and the like.  Does your state have such a department?  Most do.  Also, if your former employer did not attempt to make reasonable accomadations  for your work, such as purchasing ZT for your job, then they have violated the federal “reasonable accommodation act” under ADA.  Many employers are either not aware of the law or hope you are not. 

I had partial sight until 2014 and then went totally blind and made the jump to JAWS.  There was and is a learning curve but there are many helps within the program and I have basically trained myself.  It gets easier with practice.  Give yourself time to work with Fusion.

 

Dan

  If I can be of more help you can private message me

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Coburn
Sent: Friday, April 6, 2018 9:53 AM
To: main@jfw.groups.io
Subject: new to Jaws

 

hi everyone,

 

I have a Fusion 11 home license that i want to upgrade to fusion 2018,  but i don’t have the $200 all at once,  because I lost my job in february.

 

i lost my job with DXC technologies because the place i worked for took zoomtext off my computer.  I had a corporate workstation & company wouldmt pay the bill for a corporate license.   how much does the corporate license cost?   I don’t even know they wouldn’t tell me for sure?  

 

anyway,  this just goes to prove fusion is the perfect priduct for me because i have a smidgen of sight left but not enough to read print anymore.  i mean i can at very high magnification levels but i really need speech to distingquish beteeen 8’s & 6’s & some other letters & numbers. I’ve been trying to make the transition from zoomtext to jaws but jaws is still very confusing to me.   do you guys have any suggestions how to make the transition easier?  even with a fusion 11 home license i know zoomtext real well but Jaws I don’t really get at all & I don’t know where to go for help especially now that I’m unemployed and VR won’t help me.

 

VR has this new stupid rule that blindness no longer enough disabled to be a VR client no more so no one will help me.  

 

thanks, 

 

Tom Coburn


moderated Word2016, JFW17, and Creating an Outline

Dani Pagador
 

Hi, Everyone.
Using Word2016 and JFW17, and an Braille display. I need to create a
multi-level outline where the first level has Roman numerals, the
second level has A.B.C, and the third level has 1. 2. 3.

How do I go about finding which option in the multilevel list is right?

Next, do I need to change anything in the View option to be able to
see what's going on as I fill in the outline?

Thanks,
Dani


moderated Turning wifi on and off

Laura Richardson
 

Hello,

 

Could somebody please give me step by step instructions on how to find out if the wifi in my computer is on or off? …… Using Windows 7 and Jaws 16.

 

Laura


moderated Re: jaws 218 online tax filing

Tim Ford
 

I have JAWS 17, Windows 10, and have used for several years the
www.freetaxusa.com web site. Be sure to use Chrome as the browser; the site
has critical JAWS performance gaps when I tried using IE as the browser, and
is not accessible with IE. I told this to the Free Tax USA tech support
folks.

Sincerely,
Tim Ford

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Jim Ruby
Sent: Saturday, April 7, 2018 11:12 AM
To: main@jfw.groups.io
Subject: jaws 218 online tax filing

Hi, I am curious for those of you who filed online what service did you use
and how did you find the access with jaws or other screen readers?

Thanks.


moderated Re: new to Jaws

Richard Turner
 


Tom, You absolutely qualify for VR. What State do you live in?
every State should have a group within VR that focuses on people who are blind or low-Vision. In some states I know they are merged within the larger VR agency, but blindness absolutely is covered.
I know this as a person who is blind working for a Commission for the Blind which is under VR.
Contact both of your Senator's offices for your State, assuming you are in the United States anyway.
You should also have a group that deals with Disability Rights. But you certainly could call the ADA information line at (800) 949-4232. 

Richard
 



“The secret is not to make your music louder, but to make the world quieter.” 

- Mitch Albom from The Magic Strings of Frankie Presto, page 1


On Apr 7, 2018, at 10:21 AM, Dan Longmore <danlongmore44@...> wrote:

Tom,

  Wow,  I am in PA and here we have a department with VR just for assisting blind and visually impared with work, training and the like.  Does your state have such a department?  Most do.  Also, if your former employer did not attempt to make reasonable accomadations  for your work, such as purchasing ZT for your job, then they have violated the federal “reasonable accommodation act” under ADA.  Many employers are either not aware of the law or hope you are not. 

I had partial sight until 2014 and then went totally blind and made the jump to JAWS.  There was and is a learning curve but there are many helps within the program and I have basically trained myself.  It gets easier with practice.  Give yourself time to work with Fusion.

 

Dan

  If I can be of more help you can private message me

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Coburn
Sent: Friday, April 6, 2018 9:53 AM
To: main@jfw.groups.io
Subject: new to Jaws

 

hi everyone,

 

I have a Fusion 11 home license that i want to upgrade to fusion 2018,  but i don’t have the $200 all at once,  because I lost my job in february.

 

i lost my job with DXC technologies because the place i worked for took zoomtext off my computer.  I had a corporate workstation & company wouldmt pay the bill for a corporate license.   how much does the corporate license cost?   I don’t even know they wouldn’t tell me for sure?  

 

anyway,  this just goes to prove fusion is the perfect priduct for me because i have a smidgen of sight left but not enough to read print anymore.  i mean i can at very high magnification levels but i really need speech to distingquish beteeen 8’s & 6’s & some other letters & numbers. I’ve been trying to make the transition from zoomtext to jaws but jaws is still very confusing to me.   do you guys have any suggestions how to make the transition easier?  even with a fusion 11 home license i know zoomtext real well but Jaws I don’t really get at all & I don’t know where to go for help especially now that I’m unemployed and VR won’t help me.

 

VR has this new stupid rule that blindness no longer enough disabled to be a VR client no more so no one will help me.  

 

thanks, 

 

Tom Coburn


moderated Re: jaws 218 online tax filing

 

Are you in the US or Canada, can't remember, I know one Jim who I think is on several lists is from Canada. If so, all government Canada websites are extremely accessible.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Ruby
Sent: Saturday, April 07, 2018 11:12 AM
To: main@jfw.groups.io
Subject: jaws 218 online tax filing

Hi, I am curious for those of you who filed online what service did you use and how did you find the access with jaws or other screen readers?

Thanks.


moderated jaws 218 online tax filing

Jim Ruby <jim@...>
 

Hi, I am curious for those of you who filed online what service did you use
and how did you find the access with jaws or other screen readers?

Thanks.


moderated Re: File find in windows 7 with jaws 2018

Steve Matzura
 

You're most welcome. Always happy and ready to assist.


On 4/7/2018 12:52 PM, Terrie Terlau wrote:

Hello Steve,

Thank you very much for sharing this info! I didn’t know about the OR and it is great to find out about it.

Thanks for all you do.

Terrie Terlau

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Steve Matzura
Sent: Saturday, April 07, 2018 10:11 AM
To: main@jfw.groups.io
Subject: Re: File find in windows 7 with jaws 2018

 

I left Windows 7 behind over a year ago, so I can't tell you whether Windows Key plus F was ever file find, but I *can* tell you how to find files.

 

1. Open Windows Explorer in any way you know how--from the "Computer" icon on the Desktop, or by pressing Windows Key plus E from anywhere on the system.

 

2. Select, then open, any drive from the displayed list by pressing Up or Down Arrow until you find the drive you want, then pressing ENTER.

 

3. Press the TAB key until you hear JAWS tell you you are in an edit field.

 

4. Type any part of the name of the file for which you are looking, and press ENTER. Note, this is not where you can find files by their contents, only their names.

 

Extra: If you want to find more than one file by partial name, use the keyword "OR", that's O R in uppercase, very important. For example, if I wanted to find files with the letter  groups d o g or c a  t, my search string would look like this:

 

dog OR cat

 

Note the word OR was in uppercase.

 

5. Tab to the list view to access the list of files the system found based on what was typed above.

6. When you're done searching and accessing, press ALT plus F4 to close the Explorer window.

HTH

On 4/7/2018 10:00 AM, John J. Fioravanti, Jr. wrote:

Good morning:

My legal assistant installed a new hard drive on my windows 7 computer with Jaws 2018. When I hit the windows key+F I don't get file find. Can this be fixed and also, if not, how do I find file find under windows programs. Oddly enough, I can't seem to find it.

Thanks very much.

 



moderated Re: File find in windows 7 with jaws 2018

Terrie Terlau
 

Hello Steve,

Thank you very much for sharing this info! I didn’t know about the OR and it is great to find out about it.

Thanks for all you do.

Terrie Terlau

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Steve Matzura
Sent: Saturday, April 07, 2018 10:11 AM
To: main@jfw.groups.io
Subject: Re: File find in windows 7 with jaws 2018

 

I left Windows 7 behind over a year ago, so I can't tell you whether Windows Key plus F was ever file find, but I *can* tell you how to find files.

 

1. Open Windows Explorer in any way you know how--from the "Computer" icon on the Desktop, or by pressing Windows Key plus E from anywhere on the system.

 

2. Select, then open, any drive from the displayed list by pressing Up or Down Arrow until you find the drive you want, then pressing ENTER.

 

3. Press the TAB key until you hear JAWS tell you you are in an edit field.

 

4. Type any part of the name of the file for which you are looking, and press ENTER. Note, this is not where you can find files by their contents, only their names.

 

Extra: If you want to find more than one file by partial name, use the keyword "OR", that's O R in uppercase, very important. For example, if I wanted to find files with the letter  groups d o g or c a  t, my search string would look like this:

 

dog OR cat

 

Note the word OR was in uppercase.

 

5. Tab to the list view to access the list of files the system found based on what was typed above.

6. When you're done searching and accessing, press ALT plus F4 to close the Explorer window.

HTH

On 4/7/2018 10:00 AM, John J. Fioravanti, Jr. wrote:

Good morning:

My legal assistant installed a new hard drive on my windows 7 computer with Jaws 2018. When I hit the windows key+F I don't get file find. Can this be fixed and also, if not, how do I find file find under windows programs. Oddly enough, I can't seem to find it.

Thanks very much.

 


moderated Re: new to Jaws

Dan Longmore
 

Tom,

  Wow,  I am in PA and here we have a department with VR just for assisting blind and visually impared with work, training and the like.  Does your state have such a department?  Most do.  Also, if your former employer did not attempt to make reasonable accomadations  for your work, such as purchasing ZT for your job, then they have violated the federal “reasonable accommodation act” under ADA.  Many employers are either not aware of the law or hope you are not. 

I had partial sight until 2014 and then went totally blind and made the jump to JAWS.  There was and is a learning curve but there are many helps within the program and I have basically trained myself.  It gets easier with practice.  Give yourself time to work with Fusion.

 

Dan

  If I can be of more help you can private message me

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Coburn
Sent: Friday, April 6, 2018 9:53 AM
To: main@jfw.groups.io
Subject: new to Jaws

 

hi everyone,

 

I have a Fusion 11 home license that i want to upgrade to fusion 2018,  but i don’t have the $200 all at once,  because I lost my job in february.

 

i lost my job with DXC technologies because the place i worked for took zoomtext off my computer.  I had a corporate workstation & company wouldmt pay the bill for a corporate license.   how much does the corporate license cost?   I don’t even know they wouldn’t tell me for sure?  

 

anyway,  this just goes to prove fusion is the perfect priduct for me because i have a smidgen of sight left but not enough to read print anymore.  i mean i can at very high magnification levels but i really need speech to distingquish beteeen 8’s & 6’s & some other letters & numbers. I’ve been trying to make the transition from zoomtext to jaws but jaws is still very confusing to me.   do you guys have any suggestions how to make the transition easier?  even with a fusion 11 home license i know zoomtext real well but Jaws I don’t really get at all & I don’t know where to go for help especially now that I’m unemployed and VR won’t help me.

 

VR has this new stupid rule that blindness no longer enough disabled to be a VR client no more so no one will help me.  

 

thanks, 

 

Tom Coburn


moderated Re: have deleted internet by mistake

netbat66
 

if the iexplorer files are still installed you can create your own desktop icon.
go to c:\program files\internet explorer\iesplorer.exe.
then open a context menu on it with shift f10
click on send to and choose shortcut to desktop.
this will put the icon back on the desktop.
then open a context menu on the icon, click on properties. in there in short cut key you can add your short cut key. press i and it will add the control and alt to the edit field.. click on ok to save the icon changes.

-----Original Message-----
From: Val Paul
Sent: Friday, April 06, 2018 11:57 PM
To: main@jfw.groups.io
Subject: Re: have deleted internet by mistake

The internet app was a desktop app, but wasn't a shortcut on the
desktop.

Everytime i wanted to use it, i had to press the start menu and press
the letter I.

Hope that makes it a bit clearer!


Vilinus Val.Hi Roger the dodger!

[My canadian boyfriend used to call me that]


On 07/04/2018 05:09, Mike B. wrote:
*Hi Bill,*
**
*I understand the Windows 10 thing, but what I'm not understanding is, if you delete something from the Apps list, are you deleting the App, or an icon? Val said she deleted from the Apps program list, so does this mean from the Apps or from all programs, or both? Believe me I'm not trying to create any debate, I'm just trying to learn Windows 10 as well! LOL As far as I'm concerned I'm keeping Windows 10 on my secondary computer, but my main operating system is still Windows 7 by a long shot! LOL *
Take care. Mike. Go Dodgers!
Sennt from my iBarstool.
Arguing with a woman is like reading a software license agreement. In the end you have to ignore everything, & click I agree.
----- Original Message -----
*From:* Bill White <mailto:billwhite92701@...>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:* Friday, April 06, 2018 7:30 PM
*Subject:* Re: have deleted internet by mistake
**

Hi, Mike. She didn’t delete it from the desktop. She uses Windows 10, and deleted it from the Apps list.

Bill White

billwhite92701@... <mailto:billwhite92701@...>

*From:*main@jfw.groups.io <mailto:main@jfw.groups.io> [mailto:main@jfw.groups.io] *On Behalf Of *Mike B.
*Sent:* Friday, April 6, 2018 7:00 PM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: have deleted internet by mistake

*Hi Val,*

*Try the following:*

*1. Go to the Desktop & press enter on the Recycle Bin icon.*

*2. Arrow up / down this list of items that might be in here, & if you find Internet Explorer, with Internet Explorer highlighted, open the context menu with the applications key or shift + F10, arrow to, Restore, & press enter.*

*This should put the icon back in place, if it was found in the Recycle Bin.*

Take care. Mike. Go Dodgers!
Sennt from my iBarstool.
Arguing with a woman is like reading a software license agreement. In the end you have to ignore everything, & click I agree.

----- Original Message -----

*From:*Val Paul <mailto:vpcara79@...>

*To:*main@jfw.groups.io <mailto:main@jfw.groups.io>

*Sent:*Friday, April 06, 2018 6:25 PM

*Subject:*have deleted internet by mistake

Hi!

Unfortunately, i have removed internet explorer from apps program list,
how do i reload it?

I think i get more and more absent minded by the day!


Val.



moderated Re: How fix JAWS so it doesn't babble all the participants

Michal Nowicki
 

Gudrun,

 

This is probably because you have your new inbox set to display messages as conversations, that is, organize them by thread. There is a checkbox in the View tab of the Outlook ribbon that toggles this setting on and off.

 

Michal

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Gudrun Brunot
Sent: Saturday, April 7, 2018 10:41 AM
To: main@jfw.groups.io
Subject: How fix JAWS so it doesn't babble all the participants

 

Hello: The subject should indicate what I’m wondering: In Outlook 2010 and JAWS 18, after I moved my in box over to imap, Jaws now babbles all the names in a conversation before I can hear the subject line. Drives me crazy. What can I do to change that? It used to only say the name of the participant who authored the message I was highlighting.

 

participants names in the