Date   

Re: Ccleaner and jaws

Mike B. <mb69mach1@...>
 

As a support technician you shouldn't assume that all Jaws / computer users are as experienced / savvy as yourself!  They're not asking for help because they find it easy!  Please give them tips on how to use the program as they asked instead of simply telling them it's easy!
Below are some tips:
One thing about CCleaner out of the box, Jaws reads everything as buttons.  To make Jaws read the buttons as checkboxes do the following:
From: Dennis L
Hi, if you want jaws to read the status of the buttons in Tools, Options, & Settings do the following.
1. Find an option you know the status of.
2. Press, Insert + 7, on the number row above the main keyboard.
It will say add configuration file.   The name
should say Ccleaner64 press enter
Then it will say edit button. 
Tab once arrow down to check box. 
Tab to add class button press space bar.   Then to ok. 
NOTE THIS HAS ONLY BEEN TESTED WITH CCleaner!
Dennis   
 
From: Stormin
Once inside C-Cleaner:
A: Tab over to clean if that is your choice. Then  hit the space bar. Then
shift + tab to Analyze, press the spacebar, (you will hear the percentages) and then tab to
clean and what I do is shift tab back once and you will hear the list what
it found.  Press, Control + A, to highlight them all, tab to the Run Cleaner button, press the spacebar, the cleaner will remove everything that was selected, & you're done.
 
B: Doing the same but with the registry. Space bar and then tab to Scan and
percentages you will hear and then Highlight what It finds and tab to fix
enter and tab it will say fix or fix or repair all and ..
I am sure there is a person that can explain it much better than this farmer
up in Maine. Really easy to use the program. Along with using for removing
programs from  your computer if you like!
Geno
Take care.  Mike.  Sent from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----
From: Jonas Voll
Sent: Tuesday, February 06, 2018 1:00 PM
Subject: Re: Ccleaner and jaws

That app is very easy to use.

 

 

Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration and opportunity for people who are blind or visually impaired through employment, outreach, rehabilitation, education and research.


From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Val Paul
Sent: Tuesday, February 6, 2018 1:58 PM
To: main@jfw.groups.io
Subject: Re: Ccleaner and jaws

 

Don't quote me on this! My friend says it's a very visual thing, because i was hoping the same thing.

 

Val.

 

On 06/02/2018 19:54, Nino Dagostino wrote:

Hi:

 

Does any body know of a good tutorial for using ccleaner with Jaws?

 

Thank you, thank you for the warning about installing Avas.

 

Have a good day.

 

 

 

 
SonicWall identified this message as clean.
To manage your junk mail go to https://nospam.envisionus.com 
and 
logon with your domain userid and password.
If you consider this email to be spam please forward it to 
'spam@...'

NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.



Re: Ccleaner and jaws

Jonas Voll
 

That app is very easy to use.

 

 

Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration and opportunity for people who are blind or visually impaired through employment, outreach, rehabilitation, education and research.


From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Val Paul
Sent: Tuesday, February 6, 2018 1:58 PM
To: main@jfw.groups.io
Subject: Re: Ccleaner and jaws

 

Don't quote me on this! My friend says it's a very visual thing, because i was hoping the same thing.

 

Val.

 

On 06/02/2018 19:54, Nino Dagostino wrote:

Hi:

 

Does any body know of a good tutorial for using ccleaner with Jaws?

 

Thank you, thank you for the warning about installing Avas.

 

Have a good day.

 

 

 

 
SonicWall identified this message as clean.
To manage your junk mail go to https://nospam.envisionus.com 
and 
logon with your domain userid and password.
If you consider this email to be spam please forward it to 
'spam@...'

NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.



Re: win10

Bill White <billwhite92701@...>
 

If you’re using Windows 10, press the Windows key, then SHIFT plus TAB twice. You will end up in a list called All Apps. This is where you can see all of your programs.

 

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Gery Gaubert
Sent: Tuesday, February 6, 2018 12:37 PM
To: main@jfw.groups.io
Subject: win10

 

Is there some where to go to see all of the programs on my pc?  There once was an all programs and you could go to that and pick which program you wanted to open.


win10

Gery Gaubert <ggaubert@...>
 

Is there some where to go to see all of the programs on my pc?  There once was an all programs and you could go to that and pick which program you wanted to open.


Re: jaws and win 10 issue

 

Also, if you minimize to the desktop and press Alt+F4 the shutdown menu comes up with restart, switch user and all that.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Bill White
Sent: Tuesday, February 06, 2018 11:43 AM
To: main@jfw.groups.io
Subject: Re: jaws and win 10 issue

 

Yes, and if you want to go all the way to shutdown,

Windows Key plus X, then U, U. It will shut down.

 

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Gery Gaubert
Sent: Tuesday, February 6, 2018 9:46 AM
To: main@jfw.groups.io
Subject: jaws and win 10 issue

 

Disregard, I spoke to jaws tech support and those menus don’t exist any more as far as shutdown windows key x and then u for the shutdown menu


Re: Ccleaner and jaws

Val Paul
 

Don't quote me on this! My friend says it's a very visual thing, because i was hoping the same thing.


Val.


On 06/02/2018 19:54, Nino Dagostino wrote:

Hi:

 

Does any body know of a good tutorial for using ccleaner with Jaws?

 

Thank you, thank you for the warning about installing Avas.

 

Have a good day.

 

 



Ccleaner and jaws

Nino Dagostino
 

Hi:

 

Does any body know of a good tutorial for using ccleaner with Jaws?

 

Thank you, thank you for the warning about installing Avas.

 

Have a good day.

 

 


Re: imae varication

Ricky Joe Cook <rickyjoecook@...>
 

I hate that. It makes me so annoyed.
 
Ricky
 

From: Gery Gaubert
Sent: Tuesday, February 6, 2018 11:42 AM
To: main@jfw.groups.io
Subject: imae varication
 

I have ran into this problem today for the first time.  My credit union has this new thin.  When tryin to access your account you need to select an imahe and write some text to o with that imae.  This is the only way to et in.  Jaws doesn’t speak a list of the imaes and I’m dead in the water.  I can probably et someone to come in and select an imae for me but there oes just a bit more of my independence.  Just mentionin it because I’ve never seen or heard of this before today.


Virus-free. www.avg.com


Re: jaws and win 10 issue

Bill White <billwhite92701@...>
 

Yes, and if you want to go all the way to shutdown,

Windows Key plus X, then U, U. It will shut down.

 

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Gery Gaubert
Sent: Tuesday, February 6, 2018 9:46 AM
To: main@jfw.groups.io
Subject: jaws and win 10 issue

 

Disregard, I spoke to jaws tech support and those menus don’t exist any more as far as shutdown windows key x and then u for the shutdown menu


imae varication

Gery Gaubert <ggaubert@...>
 

I have ran into this problem today for the first time.  My credit union has this new thin.  When tryin to access your account you need to select an imahe and write some text to o with that imae.  This is the only way to et in.  Jaws doesn’t speak a list of the imaes and I’m dead in the water.  I can probably et someone to come in and select an imae for me but there oes just a bit more of my independence.  Just mentionin it because I’ve never seen or heard of this before today.


Re: jaws issues

Val Paul
 

I'm afraid you're going to find that things we were able to do with the old windows, we can't do any more.

They seem to go round the houses before you can do an application.

I much prefer windows 7.


Val.


On 06/02/2018 17:38, Gery Gaubert wrote:

Before the big windows 10 update I could press the windows key and arrow through all of the choices.  I could use the arrow keys to select all programs and other things.  I am unable to do this now.  Does anyone know how to get this resolved?  



Re: How do you unprotect?

 

Dave,

          Unfortunately not as I do not have a machine with a copy of Office 2007 running on it.  It's almost certainly got to be somewhere under Trust Center, perhaps a layer further down, but I can't even be 100% certain of that.  I had actually thought it was part of Trust Center since at least Office 2007, when the ribbon interface made its debut.
--
Brian  Windows 10 Home, 64-Bit, Version 1709, Build 16299  (dot level on request - it changes too often to keep in signature)

 
If you don't like someone, the way he holds his spoon will make you furious; if you do like him, he can turn his plate over into your lap and you won't mind.     ~ Irving Becker


jaws and win 10 issue

Gery Gaubert <ggaubert@...>
 

Disregard, I spoke to jaws tech support and those menus don’t exist any more as far as shutdown windows key x and then u for the shutdown menu


jaws issues

Gery Gaubert <ggaubert@...>
 

Before the big windows 10 update I could press the windows key and arrow through all of the choices.  I could use the arrow keys to select all programs and other things.  I am unable to do this now.  Does anyone know how to get this resolved?  


Re: How do you unprotect?

Dave...
 


Brian,
 
This sequence appears to not work with Office/Word 2007. Cannot find "protected view" in the trust center list. Any hints as to where else I could look?
 
Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer
 
 

----- Original Message -----
Sent: Tuesday, February 06, 2018 07:30
Subject: Re: How do you unprotect?

I absolutely despise protected view in MS-Office since I never open Office files from untrusted sources.   If you wish to turn off protected view entirely, the following step-by-step instructions worked at least through Office 2013, and I believe Office 2016.  I don't have Office 365 available to experiment with.

Adjusting Protected View Settings in MS-Office Programs

1.        <!--[endif]-->ALT+F to open the file tab/menu

2.       <!--[endif]-->Hit ‘T’ to open the Options Dialog.

3.       <!--[endif]-->Arrow Down until you hit Trust Center

4.      <!--[endif]-->Either:

a       <!--[endif]-->Hit TAB until you come to the Trust Center Settings button then activate it.

b      <!--[endif]-->Hit ALT+T which will activate the Trust Center Settings Button.

5.       <!--[endif]-->In the Trust Center Settings dialog, use up or down arrow to get to Protected View.  I say up or down because you will land on whatever setting the last person who used the Trust Center Settings was on, so Protected View could be above or below where you are.  You’ll have to listen until you hit it or reach the end and need to reverse direction.

6.      <!--[endif]-->Once on Protected View, hit TAB to throw focus on to the checkboxes related to protected mode.  You should exercise additional caution in what you are willing to open as far as what comes to you via e-mail attachments or download from the internet, but if your sources are trusted (you know that they run antivirus programs or are major players with tight security) you will generally be fine.  You will want to uncheck the one or more of the following checkboxes, which you should encounter in this order:

a       <!--[endif]-->Enable Protected View for files originating from the Internet

b      <!--[endif]-->Enable Protected View for files located in potentially unsafe locations

c       <!--[endif]-->Enable Protected View for Outlook Attachments.

7.       <!--[endif]-->There will be one additional checkbox, Enable data execution protection mode, which should be left checked.

--
Brian  Windows 10 Home, 64-Bit, Version 1709, Build 16299  (dot level on request - it changes too often to keep in signature)


If you don't like someone, the way he holds his spoon will make you furious; if you do like him, he can turn his plate over into your lap and you won't mind.     ~ Irving Becker


Re: How do you unprotect?

Kevin Hourigan <kevinthourigan@...>
 

It works in Office 365.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Brian Vogel
Sent: February 6, 2018 7:31 AM
To: main@jfw.groups.io
Subject: Re: How do you unprotect?

 

I absolutely despise protected view in MS-Office since I never open Office files from untrusted sources.   If you wish to turn off protected view entirely, the following step-by-step instructions worked at least through Office 2013, and I believe Office 2016.  I don't have Office 365 available to experiment with.

Adjusting Protected View Settings in MS-Office Programs

1.        ALT+F to open the file tab/menu

2.       Hit ‘T’ to open the Options Dialog.

3.       Arrow Down until you hit Trust Center

4.      Either:

a.       Hit TAB until you come to the Trust Center Settings button then activate it.

b.      Hit ALT+T which will activate the Trust Center Settings Button.

5.       In the Trust Center Settings dialog, use up or down arrow to get to Protected View.  I say up or down because you will land on whatever setting the last person who used the Trust Center Settings was on, so Protected View could be above or below where you are.  You’ll have to listen until you hit it or reach the end and need to reverse direction.

6.      Once on Protected View, hit TAB to throw focus on to the checkboxes related to protected mode.  You should exercise additional caution in what you are willing to open as far as what comes to you via e-mail attachments or download from the internet, but if your sources are trusted (you know that they run antivirus programs or are major players with tight security) you will generally be fine.  You will want to uncheck the one or more of the following checkboxes, which you should encounter in this order:

a.       Enable Protected View for files originating from the Internet

b.      Enable Protected View for files located in potentially unsafe locations

c.       Enable Protected View for Outlook Attachments.

7.       There will be one additional checkbox, Enable data execution protection mode, which should be left checked.

--
Brian  Windows 10 Home, 64-Bit, Version 1709, Build 16299  (dot level on request - it changes too often to keep in signature)

 
If you don't like someone, the way he holds his spoon will make you furious; if you do like him, he can turn his plate over into your lap and you won't mind.     ~ Irving Becker


Re: Screenreader Accessible Data Recovery Software

Steve Nutt
 

Not on an external drive it wouldn't, not by default anyway.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of soner
Sent: 29 January 2018 19:40
To: main@jfw.groups.io
Subject: Re: Screenreader Accessible Data Recovery Software

What is the earliest system restore point? did you check? that may rescue if any assigned prior to your deletion.

On 1/28/18, Annabelle Susan Morison <foristnights@comcast.net> wrote:
Sadly I pressed Shift+Delete on the wrong folder, namely the backups
folders of the documents, those were on my external hard drive, and
those are the ones I'm trying to recover. Those folders are named
"Poems", "Program Files", and "Pronunciation Guide".

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of John
Covici
Sent: Saturday, January 27, 2018 8:48 PM
To: main@jfw.groups.io
Subject: Re: Screenreader Accessible Data Recovery Software

How about your backup?

On Sat, 27 Jan 2018 17:15:02 -0500,
Annabelle Susan Morison wrote:

[1 <text/plain; us-ascii (7bit)>]
[2 <text/html; us-ascii (quoted-printable)>] Hi, it's Annabelle.
I am in a bit of a pickle when it comes to choosing the best
screenreader accessible software for data recovery. I seem to be
going crazy trying to find a Data Recovery Software that is not only
screenreader accessible, but is able to recover all the files without
any
corruption, and is able to retain the original file names. Sadly, it's
hard for me to find something like that without resorting to spending a fortune!
The main reason I want to try and use data recovery software is
because I've recently deleted some important documents, quite by
accident, and I've been stressed out ever since this happened about a
week ago, as I don't know if they're gone forever after pressing
"shift+Delete". Do I need sighted help to access those kind of
programs? I don't want to do this the wrong way and end up losing my
mind over lost documents! Any of you JAWS members out there have any
pointers?
--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com








Re: How do you unprotect?

 

I absolutely despise protected view in MS-Office since I never open Office files from untrusted sources.   If you wish to turn off protected view entirely, the following step-by-step instructions worked at least through Office 2013, and I believe Office 2016.  I don't have Office 365 available to experiment with.

Adjusting Protected View Settings in MS-Office Programs

1.        ALT+F to open the file tab/menu

2.       Hit ‘T’ to open the Options Dialog.

3.       Arrow Down until you hit Trust Center

4.      Either:

a.       Hit TAB until you come to the Trust Center Settings button then activate it.

b.      Hit ALT+T which will activate the Trust Center Settings Button.

5.       In the Trust Center Settings dialog, use up or down arrow to get to Protected View.  I say up or down because you will land on whatever setting the last person who used the Trust Center Settings was on, so Protected View could be above or below where you are.  You’ll have to listen until you hit it or reach the end and need to reverse direction.

6.      Once on Protected View, hit TAB to throw focus on to the checkboxes related to protected mode.  You should exercise additional caution in what you are willing to open as far as what comes to you via e-mail attachments or download from the internet, but if your sources are trusted (you know that they run antivirus programs or are major players with tight security) you will generally be fine.  You will want to uncheck the one or more of the following checkboxes, which you should encounter in this order:

a.       Enable Protected View for files originating from the Internet

b.      Enable Protected View for files located in potentially unsafe locations

c.       Enable Protected View for Outlook Attachments.

7.       There will be one additional checkbox, Enable data execution protection mode, which should be left checked.

--
Brian  Windows 10 Home, 64-Bit, Version 1709, Build 16299  (dot level on request - it changes too often to keep in signature)

 
If you don't like someone, the way he holds his spoon will make you furious; if you do like him, he can turn his plate over into your lap and you won't mind.     ~ Irving Becker


Re: windows update kb4600056892 gets stuck and not installing help

Steve Matzura
 

I saw this at https://support.microsoft.com/en-gb/help/4056892/windows-10-update-kb4056892:


Microsoft has reports of some customers on a small subset of older AMD processors getting into an unbootable state after installing this KB.
 
To prevent this issue, Microsoft will temporarily pause Windows OS updates to devices with impacted AMD processors at this time.

Maybe yours is one of those?

On 2/6/2018 12:47 AM, Marvin Hunkin via Groups.Io wrote:

Hi, this update never gets installed and keeps saying getting windows ready, did contact disability help desk or answer desk, but not sure they fixed it, so is there a fix for this, and now also got a  windows defender definition cannot be updated. Any ideas, or any help.

Thanks.critical

 


Virus-free. www.avast.com


Re: mistake

Val Paul
 

Wait till i see her later! She's just a windup merchant!


Thanks a lot for checking.


Val.

On 06/02/2018 12:31, Carol Smith via Groups.Io wrote:
Hi,

You are still getting messages through to the list, so you don't need to worry about that right now.  If you sto getting messages, then, you might need to check into it.

Carol


On 2/6/2018 7:25 AM, Val Paul wrote:
Hi!

Think my friend has unsibscribed me by mistake, but not sure it could be a wind up!

She said she was going to, but I hope it's one of her pranks!


Val Paul.