Date   

accessible antivirus software

l. radical
 

Hello to all. I use the jaws version 17 and i am looking for a
friendly and accessible antivirus programm. Seams now i used the avg
product but lately i have trouble in accessibility. So any opinion
from your experiences wellcome.
Regards,
--Kostas--


Re: goldwave 631 and jaws

Richard Turner <richardturner42@...>
 

I think that is an old reference that he hasn’t removed.  It used to have a “Blind mode” or “Screen Reader user” mode, but I haven’t run across that in years.

I think that might have gone away with at least version 6.

 

I’m glad setting the Windows at maximized did the trick.

 

Enjoy,

Richard

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Sunday, December 10, 2017 7:41 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

Mr Richard:

 

Good news:

I found the culprit I think;

I went into the goldwave manual and looked up accessibility options;

It told me to go into windows start, look for goldwave setup and check the force screen reader mode box on.

Needless to say, I went into the win start menu did not locate any goldwave setup anything.

Then it occurred to me to see what was in goldwve itself.

I clicked options, then under that menu clicked window;

Then a dialogue box comes up, there is a set of radio buttons where one of them is maximized, and others say things like tile, cascade, horizontal vertical etc.  Once I radio checked the maximized, everything came alive.

Needless to say, I never did find the “forced screen reader mode from goldwave setup from windows startmenu

.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Sunday, December 10, 2017 9:40 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

Hi Mike,

 

I hope the Law school finals go well. 

 

I doubt this is helpful, but did you leave the zip file in the enu file?

Perhaps removing it, and rebooting?

 

I do not know if the JAWS scripts require a certain resolution, but if you have trouble with the Jaws cursor, then it sounds like something else is going on.

Make sure the window is maximized.

I know Jaws has something about a Virtual Ribbon and it should be turned off.

I am not a Jaws expert by any stretch of anyone’s imagination, but if you search for turning off the virtual ribbon in Jaws via Google, you will probaby find the answer quickly.

 

Or, I know there are others on this list that use GoldWave and that know much more about the mysteries of Jaws.

 

I’m glad at least the sets are now installed, not that it does you much good yet.

 

I’m sure it will get sorted.  At last resort, you could call Jaws support and see if you actually get a helpful person.

 

Best of luck,

Richard

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Sunday, December 10, 2017 5:21 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

Dear Mr. Richard:

First, please excuse the delay in returning the line; for I am studying for law school finals hence forth.

 

Second, I have performed the steps of which you outlined in previous post;

When I looked in the enu from within the jaws-explore-settings box, you were correct in that the goldwave.anything portions of the scripts were not present.

I then copied the zip file with the components of the scripts into the enu folder;

I extracted the zip file’s components within the enu making sure not to let the extractor create a subfolder under the enu folder.

The goldwave scripts are present.

By the way, I performed these steps with goldwave closed.

Upon post extraction, I closed and restarted jauws; then opened goldwave.

Once goldwave opened, I check the script settings with insert-q and it says that “goldwave 5 and 6 settings are loaded.”

Furthermore, within the insert-1 help mode of jaws, the keys do say what they are supposed to do; such as: insert-s if pressed within help mode, jaws will say “announces the start marker position.”  However, once out of help mode, when I hit keys such as alt-shift-s to see where the start marker is, jaws remains mum.  When pressing any keys that should give information, jaws remains silent.

 

I apologize for the long explanation but I wish to give you an account of what I did so you can tell me where I missed anything within the process ou’ve prescribed.

 

One idea, I wonder if the resolution within windows10 needs to be a certain setting for jaws to work.  I ask this in contemplation because my jaws cursor never works; it says “blank blank” whenst I arrow around in jaws cursor mode.

 

I do thank you for reading this entirely; any suggestions from you or anyone else who might read this?  I’m afraid to call the jaws company for there is nothing to stop them from passing the buck and blaming the issue on goldwave’s development.

 

Please advise?

 

Mike M.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, December 9, 2017 12:52 PM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

No need to apologize.  I am a recent prisoner of Jaws having been a Window-eyes user for over 20 years and had to learn this just a few months ago.

 

On Windows 10, the way I learned it was to tap the Windows key to bring up the search box.

I then arrow down a little ways into the list of apps and hit the letter j, then continue arrowing to Jaws 2018, or Jaws 18, whichever.

At the Jaws version you have it will say folder collapsed.

Hit the space bar.

Arrow down once to utilities and hit enter.

Then arrow down to explore scripts.

You want the ENU folder, which is the English US assuming that is where you are.

Once in that folder, you can check for the Goldwave script files.

If they are not there, just copy them into that folder and restart Jaws.

Now, all should be well.

 

I believe there is a way to get there from the Jaws menus.

O yes, and have GoldWave closed when you do this just to be sure.

 

HTH,

Richard

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Saturday, December 9, 2017 9:45 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

Ok my friend:

 

I must first apologize for demonstrating my incompetence.

 

First, how do I explore scripts?

Do I do it from within gw? And if so what keys do I hit or whatever to see if my scripts are there?

 

Second, what folder would I copy them into assuming they are not in the correct place already?

 

In sum, step-by-step instructions would most be appreciated.  Maybe wire off list?

 

Mike M.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, December 9, 2017 11:06 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

I’m not sure when this happened, but I suspect it was when I updated from Jaws 18, but my GoldWave wasn’t responding to the keystrokes.

I checked under Explore Scripts and the GoldWave script files were not there.

I copied them into the folder and now all works correctly.

 

I guess I am familiar enough with GoldWave that I worked around it the few times I’ve used GoldWave since I upgraded to 2018.

 

 

I’m not sure if that is what’s going on with you, but I’d double check that all the files are where they need to be.

 

Richard

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Saturday, December 9, 2017 7:24 AM
To: main@jfw.groups.io
Subject: goldwave 631 and jaws

 

Hi guys:

I am using jaws 2018 win10 and goldwave 631.

 

I have the goldwave v5 scrips script version 1.6 by lee and others;

Is this the correct set of scripts I should have, or are there others floating around somewhere?

 

When I open a file in goldwave, or goldwave itself, jaws says the percentage as it decompresses the file;

However, once file is open and ready for editing,

The keys to read cursors and other things are not working;

For instance, shift-alt-s is supposed to read the start marker position;

Shift-alt-f is supposed to read the finish marker positions;

Neither of these key combinations nor others operate this way;

Also when arrowing through the file, nothing is read.

 

It kind of feels like the areas of screen that hold all this info is not congruent with the areas expected by the scripts to gather such info.

 

I hope this makes sense;

S O S

Am trying to maneuver through hours of class lectures for Tuesday’s final exam.

 

Any assistance will most certainly be appreciated as time is of essence.

 

Thank you muchly.

 

Mike M.

 


Re: goldwave 631 and jaws

mike mcglashon
 

Sorry Mr. John:
If have win10, jaws2018, and goldwave631;

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of John
Covici
Sent: Sunday, December 10, 2017 10:37 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

What version of the goldwave scripts do you have? I have 2_0 and earlier
versions may not work -- also make sure you have Jaws 18 or 2018, I am not
sure about earlier versions.

On Sun, 10 Dec 2017 09:40:27 -0500,
Richard Turner wrote:

[1 <text/plain; us-ascii (quoted-printable)>]
[2 <text/html; us-ascii (quoted-printable)>] Hi Mike,

I hope the Law school finals go well.

I doubt this is helpful, but did you leave the zip file in the enu file?

Perhaps removing it, and rebooting?

I do not know if the JAWS scripts require a certain resolution, but if you
have trouble with the Jaws cursor, then it sounds like something else is
going on.

Make sure the window is maximized.

I know Jaws has something about a Virtual Ribbon and it should be turned
off.

I am not a Jaws expert by any stretch of anyone's imagination, but if you
search for turning off the virtual ribbon in Jaws via Google, you will
probaby find the answer quickly.

Or, I know there are others on this list that use GoldWave and that know
much more about the mysteries of Jaws.

I'm glad at least the sets are now installed, not that it does you much
good yet.

I'm sure it will get sorted. At last resort, you could call Jaws support
and see if you actually get a helpful person.

Best of luck,

Richard

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike
mcglashon
Sent: Sunday, December 10, 2017 5:21 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

Dear Mr. Richard:

First, please excuse the delay in returning the line; for I am studying
for law school finals hence forth.

Second, I have performed the steps of which you outlined in previous
post;

When I looked in the enu from within the jaws-explore-settings box, you
were correct in that the goldwave.anything portions of the scripts were not
present.

I then copied the zip file with the components of the scripts into the
enu folder;

I extracted the zip file's components within the enu making sure not to
let the extractor create a subfolder under the enu folder.

The goldwave scripts are present.

By the way, I performed these steps with goldwave closed.

Upon post extraction, I closed and restarted jauws; then opened goldwave.

Once goldwave opened, I check the script settings with insert-q and it
says that "goldwave 5 and 6 settings are loaded."

Furthermore, within the insert-1 help mode of jaws, the keys do say
what they are supposed to do; such as: insert-s if pressed within help
mode, jaws will say "announces the start marker position." However, once out
of help mode, when I hit keys such as alt-shift-s to see where the start
marker is, jaws remains mum. When pressing any keys that should give
information, jaws remains silent.

I apologize for the long explanation but I wish to give you an account of
what I did so you can tell me where I missed anything within the process
ou've prescribed.

One idea, I wonder if the resolution within windows10 needs to be a
certain setting for jaws to work. I ask this in contemplation because my
jaws cursor never works; it says "blank blank" whenst I arrow around in jaws
cursor mode.

I do thank you for reading this entirely; any suggestions from you or
anyone else who might read this? I'm afraid to call the jaws company for
there is nothing to stop them from passing the buck and blaming the issue on
goldwave's development.

Please advise?

Mike M.

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Richard Turner
Sent: Saturday, December 9, 2017 12:52 PM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

No need to apologize. I am a recent prisoner of Jaws having been a
Window-eyes user for over 20 years and had to learn this just a few months
ago.

On Windows 10, the way I learned it was to tap the Windows key to bring up
the search box.

I then arrow down a little ways into the list of apps and hit the letter
j, then continue arrowing to Jaws 2018, or Jaws 18, whichever.

At the Jaws version you have it will say folder collapsed.

Hit the space bar.

Arrow down once to utilities and hit enter.

Then arrow down to explore scripts.

You want the ENU folder, which is the English US assuming that is where
you are.

Once in that folder, you can check for the Goldwave script files.

If they are not there, just copy them into that folder and restart Jaws.

Now, all should be well.

I believe there is a way to get there from the Jaws menus.

O yes, and have GoldWave closed when you do this just to be sure.

HTH,

Richard

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike
mcglashon
Sent: Saturday, December 9, 2017 9:45 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

Ok my friend:

I must first apologize for demonstrating my incompetence.

First, how do I explore scripts?

Do I do it from within gw? And if so what keys do I hit or whatever to see
if my scripts are there?

Second, what folder would I copy them into assuming they are not in the
correct place already?

In sum, step-by-step instructions would most be appreciated. Maybe wire
off list?

Mike M.

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Richard Turner
Sent: Saturday, December 9, 2017 11:06 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

I'm not sure when this happened, but I suspect it was when I updated from
Jaws 18, but my GoldWave wasn't responding to the keystrokes.

I checked under Explore Scripts and the GoldWave script files were not
there.

I copied them into the folder and now all works correctly.

I guess I am familiar enough with GoldWave that I worked around it the few
times I've used GoldWave since I upgraded to 2018.

I'm not sure if that is what's going on with you, but I'd double check
that all the files are where they need to be.

Richard

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike
mcglashon
Sent: Saturday, December 9, 2017 7:24 AM
To: main@jfw.groups.io
Subject: goldwave 631 and jaws

Hi guys:

I am using jaws 2018 win10 and goldwave 631.

I have the goldwave v5 scrips script version 1.6 by lee and others;

Is this the correct set of scripts I should have, or are there others
floating around somewhere?

When I open a file in goldwave, or goldwave itself, jaws says the
percentage as it decompresses the file;

However, once file is open and ready for editing,

The keys to read cursors and other things are not working;

For instance, shift-alt-s is supposed to read the start marker
position;

Shift-alt-f is supposed to read the finish marker positions;

Neither of these key combinations nor others operate this way;

Also when arrowing through the file, nothing is read.

It kind of feels like the areas of screen that hold all this info is not
congruent with the areas expected by the scripts to gather such info.

I hope this makes sense;

S O S

Am trying to maneuver through hours of class lectures for Tuesday's final
exam.

Any assistance will most certainly be appreciated as time is of essence.

Thank you muchly.

Mike M.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici
covici@ccs.covici.com


Re: goldwave 631 and jaws

mike mcglashon
 

Mr Richard:

 

Good news:

I found the culprit I think;

I went into the goldwave manual and looked up accessibility options;

It told me to go into windows start, look for goldwave setup and check the force screen reader mode box on.

Needless to say, I went into the win start menu did not locate any goldwave setup anything.

Then it occurred to me to see what was in goldwve itself.

I clicked options, then under that menu clicked window;

Then a dialogue box comes up, there is a set of radio buttons where one of them is maximized, and others say things like tile, cascade, horizontal vertical etc.  Once I radio checked the maximized, everything came alive.

Needless to say, I never did find the “forced screen reader mode from goldwave setup from windows startmenu

.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Sunday, December 10, 2017 9:40 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

Hi Mike,

 

I hope the Law school finals go well. 

 

I doubt this is helpful, but did you leave the zip file in the enu file?

Perhaps removing it, and rebooting?

 

I do not know if the JAWS scripts require a certain resolution, but if you have trouble with the Jaws cursor, then it sounds like something else is going on.

Make sure the window is maximized.

I know Jaws has something about a Virtual Ribbon and it should be turned off.

I am not a Jaws expert by any stretch of anyone’s imagination, but if you search for turning off the virtual ribbon in Jaws via Google, you will probaby find the answer quickly.

 

Or, I know there are others on this list that use GoldWave and that know much more about the mysteries of Jaws.

 

I’m glad at least the sets are now installed, not that it does you much good yet.

 

I’m sure it will get sorted.  At last resort, you could call Jaws support and see if you actually get a helpful person.

 

Best of luck,

Richard

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Sunday, December 10, 2017 5:21 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

Dear Mr. Richard:

First, please excuse the delay in returning the line; for I am studying for law school finals hence forth.

 

Second, I have performed the steps of which you outlined in previous post;

When I looked in the enu from within the jaws-explore-settings box, you were correct in that the goldwave.anything portions of the scripts were not present.

I then copied the zip file with the components of the scripts into the enu folder;

I extracted the zip file’s components within the enu making sure not to let the extractor create a subfolder under the enu folder.

The goldwave scripts are present.

By the way, I performed these steps with goldwave closed.

Upon post extraction, I closed and restarted jauws; then opened goldwave.

Once goldwave opened, I check the script settings with insert-q and it says that “goldwave 5 and 6 settings are loaded.”

Furthermore, within the insert-1 help mode of jaws, the keys do say what they are supposed to do; such as: insert-s if pressed within help mode, jaws will say “announces the start marker position.”  However, once out of help mode, when I hit keys such as alt-shift-s to see where the start marker is, jaws remains mum.  When pressing any keys that should give information, jaws remains silent.

 

I apologize for the long explanation but I wish to give you an account of what I did so you can tell me where I missed anything within the process ou’ve prescribed.

 

One idea, I wonder if the resolution within windows10 needs to be a certain setting for jaws to work.  I ask this in contemplation because my jaws cursor never works; it says “blank blank” whenst I arrow around in jaws cursor mode.

 

I do thank you for reading this entirely; any suggestions from you or anyone else who might read this?  I’m afraid to call the jaws company for there is nothing to stop them from passing the buck and blaming the issue on goldwave’s development.

 

Please advise?

 

Mike M.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, December 9, 2017 12:52 PM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

No need to apologize.  I am a recent prisoner of Jaws having been a Window-eyes user for over 20 years and had to learn this just a few months ago.

 

On Windows 10, the way I learned it was to tap the Windows key to bring up the search box.

I then arrow down a little ways into the list of apps and hit the letter j, then continue arrowing to Jaws 2018, or Jaws 18, whichever.

At the Jaws version you have it will say folder collapsed.

Hit the space bar.

Arrow down once to utilities and hit enter.

Then arrow down to explore scripts.

You want the ENU folder, which is the English US assuming that is where you are.

Once in that folder, you can check for the Goldwave script files.

If they are not there, just copy them into that folder and restart Jaws.

Now, all should be well.

 

I believe there is a way to get there from the Jaws menus.

O yes, and have GoldWave closed when you do this just to be sure.

 

HTH,

Richard

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Saturday, December 9, 2017 9:45 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

Ok my friend:

 

I must first apologize for demonstrating my incompetence.

 

First, how do I explore scripts?

Do I do it from within gw? And if so what keys do I hit or whatever to see if my scripts are there?

 

Second, what folder would I copy them into assuming they are not in the correct place already?

 

In sum, step-by-step instructions would most be appreciated.  Maybe wire off list?

 

Mike M.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, December 9, 2017 11:06 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

I’m not sure when this happened, but I suspect it was when I updated from Jaws 18, but my GoldWave wasn’t responding to the keystrokes.

I checked under Explore Scripts and the GoldWave script files were not there.

I copied them into the folder and now all works correctly.

 

I guess I am familiar enough with GoldWave that I worked around it the few times I’ve used GoldWave since I upgraded to 2018.

 

 

I’m not sure if that is what’s going on with you, but I’d double check that all the files are where they need to be.

 

Richard

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Saturday, December 9, 2017 7:24 AM
To: main@jfw.groups.io
Subject: goldwave 631 and jaws

 

Hi guys:

I am using jaws 2018 win10 and goldwave 631.

 

I have the goldwave v5 scrips script version 1.6 by lee and others;

Is this the correct set of scripts I should have, or are there others floating around somewhere?

 

When I open a file in goldwave, or goldwave itself, jaws says the percentage as it decompresses the file;

However, once file is open and ready for editing,

The keys to read cursors and other things are not working;

For instance, shift-alt-s is supposed to read the start marker position;

Shift-alt-f is supposed to read the finish marker positions;

Neither of these key combinations nor others operate this way;

Also when arrowing through the file, nothing is read.

 

It kind of feels like the areas of screen that hold all this info is not congruent with the areas expected by the scripts to gather such info.

 

I hope this makes sense;

S O S

Am trying to maneuver through hours of class lectures for Tuesday’s final exam.

 

Any assistance will most certainly be appreciated as time is of essence.

 

Thank you muchly.

 

Mike M.

 


Re: goldwave 631 and jaws

John Covici
 

What version of the goldwave scripts do you have? I have 2_0 and
earlier versions may not work -- also make sure you have Jaws 18 or
2018, I am not sure about earlier versions.

On Sun, 10 Dec 2017 09:40:27 -0500,
Richard Turner wrote:

[1 <text/plain; us-ascii (quoted-printable)>]
[2 <text/html; us-ascii (quoted-printable)>]
Hi Mike,

I hope the Law school finals go well.

I doubt this is helpful, but did you leave the zip file in the enu file?

Perhaps removing it, and rebooting?

I do not know if the JAWS scripts require a certain resolution, but if you have trouble with the Jaws cursor, then it sounds like something else is going on.

Make sure the window is maximized.

I know Jaws has something about a Virtual Ribbon and it should be turned off.

I am not a Jaws expert by any stretch of anyone’s imagination, but if you search for turning off the virtual ribbon in Jaws via Google, you will probaby find the answer quickly.

Or, I know there are others on this list that use GoldWave and that know much more about the mysteries of Jaws.

I’m glad at least the sets are now installed, not that it does you much good yet.

I’m sure it will get sorted. At last resort, you could call Jaws support and see if you actually get a helpful person.

Best of luck,

Richard

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Sunday, December 10, 2017 5:21 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

Dear Mr. Richard:

First, please excuse the delay in returning the line; for I am studying for law school finals hence forth.

Second, I have performed the steps of which you outlined in previous post;

When I looked in the enu from within the jaws-explore-settings box, you were correct in that the goldwave.anything portions of the scripts were not present.

I then copied the zip file with the components of the scripts into the enu folder;

I extracted the zip file’s components within the enu making sure not to let the extractor create a subfolder under the enu folder.

The goldwave scripts are present.

By the way, I performed these steps with goldwave closed.

Upon post extraction, I closed and restarted jauws; then opened goldwave.

Once goldwave opened, I check the script settings with insert-q and it says that “goldwave 5 and 6 settings are loaded.”

Furthermore, within the insert-1 help mode of jaws, the keys do say what they are supposed to do; such as: insert-s if pressed within help mode, jaws will say “announces the start marker position.” However, once out of help mode, when I
hit keys such as alt-shift-s to see where the start marker is, jaws remains mum. When pressing any keys that should give information, jaws remains silent.

I apologize for the long explanation but I wish to give you an account of what I did so you can tell me where I missed anything within the process ou’ve prescribed.

One idea, I wonder if the resolution within windows10 needs to be a certain setting for jaws to work. I ask this in contemplation because my jaws cursor never works; it says “blank blank” whenst I arrow around in jaws cursor mode.

I do thank you for reading this entirely; any suggestions from you or anyone else who might read this? I’m afraid to call the jaws company for there is nothing to stop them from passing the buck and blaming the issue on goldwave’s
development.

Please advise?

Mike M.

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, December 9, 2017 12:52 PM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

No need to apologize. I am a recent prisoner of Jaws having been a Window-eyes user for over 20 years and had to learn this just a few months ago.

On Windows 10, the way I learned it was to tap the Windows key to bring up the search box.

I then arrow down a little ways into the list of apps and hit the letter j, then continue arrowing to Jaws 2018, or Jaws 18, whichever.

At the Jaws version you have it will say folder collapsed.

Hit the space bar.

Arrow down once to utilities and hit enter.

Then arrow down to explore scripts.

You want the ENU folder, which is the English US assuming that is where you are.

Once in that folder, you can check for the Goldwave script files.

If they are not there, just copy them into that folder and restart Jaws.

Now, all should be well.

I believe there is a way to get there from the Jaws menus.

O yes, and have GoldWave closed when you do this just to be sure.

HTH,

Richard

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Saturday, December 9, 2017 9:45 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

Ok my friend:

I must first apologize for demonstrating my incompetence.

First, how do I explore scripts?

Do I do it from within gw? And if so what keys do I hit or whatever to see if my scripts are there?

Second, what folder would I copy them into assuming they are not in the correct place already?

In sum, step-by-step instructions would most be appreciated. Maybe wire off list?

Mike M.

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, December 9, 2017 11:06 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

I’m not sure when this happened, but I suspect it was when I updated from Jaws 18, but my GoldWave wasn’t responding to the keystrokes.

I checked under Explore Scripts and the GoldWave script files were not there.

I copied them into the folder and now all works correctly.

I guess I am familiar enough with GoldWave that I worked around it the few times I’ve used GoldWave since I upgraded to 2018.

I’m not sure if that is what’s going on with you, but I’d double check that all the files are where they need to be.

Richard

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Saturday, December 9, 2017 7:24 AM
To: main@jfw.groups.io
Subject: goldwave 631 and jaws

Hi guys:

I am using jaws 2018 win10 and goldwave 631.

I have the goldwave v5 scrips script version 1.6 by lee and others;

Is this the correct set of scripts I should have, or are there others floating around somewhere?

When I open a file in goldwave, or goldwave itself, jaws says the percentage as it decompresses the file;

However, once file is open and ready for editing,

The keys to read cursors and other things are not working;

For instance, shift-alt-s is supposed to read the start marker position;

Shift-alt-f is supposed to read the finish marker positions;

Neither of these key combinations nor others operate this way;

Also when arrowing through the file, nothing is read.

It kind of feels like the areas of screen that hold all this info is not congruent with the areas expected by the scripts to gather such info.

I hope this makes sense;

S O S

Am trying to maneuver through hours of class lectures for Tuesday’s final exam.

Any assistance will most certainly be appreciated as time is of essence.

Thank you muchly.

Mike M.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici
covici@ccs.covici.com


Task Bar

Richard Turner <richardturner42@...>
 

I accidently deleted a message about getting to the Task Bar that said to use Windows Key 1 or T.

Windows+b (as in boy) is the default Windows hotkey for getting to the Task Bar.  You can then arrow up or down through the list.

You may have to hit space bar on the Notification Chevron button to reveal more items, but that is a universal keystroke for Windows Task Bar.

 

Richard

 


Re: goldwave 631 and jaws

Richard Turner <richardturner42@...>
 

Hi Mike,

 

I hope the Law school finals go well. 

 

I doubt this is helpful, but did you leave the zip file in the enu file?

Perhaps removing it, and rebooting?

 

I do not know if the JAWS scripts require a certain resolution, but if you have trouble with the Jaws cursor, then it sounds like something else is going on.

Make sure the window is maximized.

I know Jaws has something about a Virtual Ribbon and it should be turned off.

I am not a Jaws expert by any stretch of anyone’s imagination, but if you search for turning off the virtual ribbon in Jaws via Google, you will probaby find the answer quickly.

 

Or, I know there are others on this list that use GoldWave and that know much more about the mysteries of Jaws.

 

I’m glad at least the sets are now installed, not that it does you much good yet.

 

I’m sure it will get sorted.  At last resort, you could call Jaws support and see if you actually get a helpful person.

 

Best of luck,

Richard

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Sunday, December 10, 2017 5:21 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

Dear Mr. Richard:

First, please excuse the delay in returning the line; for I am studying for law school finals hence forth.

 

Second, I have performed the steps of which you outlined in previous post;

When I looked in the enu from within the jaws-explore-settings box, you were correct in that the goldwave.anything portions of the scripts were not present.

I then copied the zip file with the components of the scripts into the enu folder;

I extracted the zip file’s components within the enu making sure not to let the extractor create a subfolder under the enu folder.

The goldwave scripts are present.

By the way, I performed these steps with goldwave closed.

Upon post extraction, I closed and restarted jauws; then opened goldwave.

Once goldwave opened, I check the script settings with insert-q and it says that “goldwave 5 and 6 settings are loaded.”

Furthermore, within the insert-1 help mode of jaws, the keys do say what they are supposed to do; such as: insert-s if pressed within help mode, jaws will say “announces the start marker position.”  However, once out of help mode, when I hit keys such as alt-shift-s to see where the start marker is, jaws remains mum.  When pressing any keys that should give information, jaws remains silent.

 

I apologize for the long explanation but I wish to give you an account of what I did so you can tell me where I missed anything within the process ou’ve prescribed.

 

One idea, I wonder if the resolution within windows10 needs to be a certain setting for jaws to work.  I ask this in contemplation because my jaws cursor never works; it says “blank blank” whenst I arrow around in jaws cursor mode.

 

I do thank you for reading this entirely; any suggestions from you or anyone else who might read this?  I’m afraid to call the jaws company for there is nothing to stop them from passing the buck and blaming the issue on goldwave’s development.

 

Please advise?

 

Mike M.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, December 9, 2017 12:52 PM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

No need to apologize.  I am a recent prisoner of Jaws having been a Window-eyes user for over 20 years and had to learn this just a few months ago.

 

On Windows 10, the way I learned it was to tap the Windows key to bring up the search box.

I then arrow down a little ways into the list of apps and hit the letter j, then continue arrowing to Jaws 2018, or Jaws 18, whichever.

At the Jaws version you have it will say folder collapsed.

Hit the space bar.

Arrow down once to utilities and hit enter.

Then arrow down to explore scripts.

You want the ENU folder, which is the English US assuming that is where you are.

Once in that folder, you can check for the Goldwave script files.

If they are not there, just copy them into that folder and restart Jaws.

Now, all should be well.

 

I believe there is a way to get there from the Jaws menus.

O yes, and have GoldWave closed when you do this just to be sure.

 

HTH,

Richard

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Saturday, December 9, 2017 9:45 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

Ok my friend:

 

I must first apologize for demonstrating my incompetence.

 

First, how do I explore scripts?

Do I do it from within gw? And if so what keys do I hit or whatever to see if my scripts are there?

 

Second, what folder would I copy them into assuming they are not in the correct place already?

 

In sum, step-by-step instructions would most be appreciated.  Maybe wire off list?

 

Mike M.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, December 9, 2017 11:06 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

I’m not sure when this happened, but I suspect it was when I updated from Jaws 18, but my GoldWave wasn’t responding to the keystrokes.

I checked under Explore Scripts and the GoldWave script files were not there.

I copied them into the folder and now all works correctly.

 

I guess I am familiar enough with GoldWave that I worked around it the few times I’ve used GoldWave since I upgraded to 2018.

 

 

I’m not sure if that is what’s going on with you, but I’d double check that all the files are where they need to be.

 

Richard

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Saturday, December 9, 2017 7:24 AM
To: main@jfw.groups.io
Subject: goldwave 631 and jaws

 

Hi guys:

I am using jaws 2018 win10 and goldwave 631.

 

I have the goldwave v5 scrips script version 1.6 by lee and others;

Is this the correct set of scripts I should have, or are there others floating around somewhere?

 

When I open a file in goldwave, or goldwave itself, jaws says the percentage as it decompresses the file;

However, once file is open and ready for editing,

The keys to read cursors and other things are not working;

For instance, shift-alt-s is supposed to read the start marker position;

Shift-alt-f is supposed to read the finish marker positions;

Neither of these key combinations nor others operate this way;

Also when arrowing through the file, nothing is read.

 

It kind of feels like the areas of screen that hold all this info is not congruent with the areas expected by the scripts to gather such info.

 

I hope this makes sense;

S O S

Am trying to maneuver through hours of class lectures for Tuesday’s final exam.

 

Any assistance will most certainly be appreciated as time is of essence.

 

Thank you muchly.

 

Mike M.

 


Re: jaws 2018 does not read items in task bar #cal-notice

Ann Byrne
 

ATo read items on the taskbar, press Windows+t or windows+1, then right and left arrow through the items.
t 04:14 AM 12/10/2017, you wrote:

First, I hold down the alt key without releasing it when I try to tab through the task bar. One of the first things I tried when I noticed this problem was using Insert F10 to open the "windows list." Jaws does not read the "windows list" as a choice. Again, the only two choices that are listed in the task bar that Jaws reads are the two most recently launched programs--(with the exception of the "windows list" which is not read. This reminds me of the pre-wondows "dos" days when we could only see one program at a time on screen or with Jaws. Thanks


Re: goldwave 631 and jaws

mike mcglashon
 

Dear Mr. Richard:

First, please excuse the delay in returning the line; for I am studying for law school finals hence forth.

 

Second, I have performed the steps of which you outlined in previous post;

When I looked in the enu from within the jaws-explore-settings box, you were correct in that the goldwave.anything portions of the scripts were not present.

I then copied the zip file with the components of the scripts into the enu folder;

I extracted the zip file’s components within the enu making sure not to let the extractor create a subfolder under the enu folder.

The goldwave scripts are present.

By the way, I performed these steps with goldwave closed.

Upon post extraction, I closed and restarted jauws; then opened goldwave.

Once goldwave opened, I check the script settings with insert-q and it says that “goldwave 5 and 6 settings are loaded.”

Furthermore, within the insert-1 help mode of jaws, the keys do say what they are supposed to do; such as: insert-s if pressed within help mode, jaws will say “announces the start marker position.”  However, once out of help mode, when I hit keys such as alt-shift-s to see where the start marker is, jaws remains mum.  When pressing any keys that should give information, jaws remains silent.

 

I apologize for the long explanation but I wish to give you an account of what I did so you can tell me where I missed anything within the process ou’ve prescribed.

 

One idea, I wonder if the resolution within windows10 needs to be a certain setting for jaws to work.  I ask this in contemplation because my jaws cursor never works; it says “blank blank” whenst I arrow around in jaws cursor mode.

 

I do thank you for reading this entirely; any suggestions from you or anyone else who might read this?  I’m afraid to call the jaws company for there is nothing to stop them from passing the buck and blaming the issue on goldwave’s development.

 

Please advise?

 

Mike M.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, December 9, 2017 12:52 PM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

No need to apologize.  I am a recent prisoner of Jaws having been a Window-eyes user for over 20 years and had to learn this just a few months ago.

 

On Windows 10, the way I learned it was to tap the Windows key to bring up the search box.

I then arrow down a little ways into the list of apps and hit the letter j, then continue arrowing to Jaws 2018, or Jaws 18, whichever.

At the Jaws version you have it will say folder collapsed.

Hit the space bar.

Arrow down once to utilities and hit enter.

Then arrow down to explore scripts.

You want the ENU folder, which is the English US assuming that is where you are.

Once in that folder, you can check for the Goldwave script files.

If they are not there, just copy them into that folder and restart Jaws.

Now, all should be well.

 

I believe there is a way to get there from the Jaws menus.

O yes, and have GoldWave closed when you do this just to be sure.

 

HTH,

Richard

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Saturday, December 9, 2017 9:45 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

Ok my friend:

 

I must first apologize for demonstrating my incompetence.

 

First, how do I explore scripts?

Do I do it from within gw? And if so what keys do I hit or whatever to see if my scripts are there?

 

Second, what folder would I copy them into assuming they are not in the correct place already?

 

In sum, step-by-step instructions would most be appreciated.  Maybe wire off list?

 

Mike M.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, December 9, 2017 11:06 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

I’m not sure when this happened, but I suspect it was when I updated from Jaws 18, but my GoldWave wasn’t responding to the keystrokes.

I checked under Explore Scripts and the GoldWave script files were not there.

I copied them into the folder and now all works correctly.

 

I guess I am familiar enough with GoldWave that I worked around it the few times I’ve used GoldWave since I upgraded to 2018.

 

 

I’m not sure if that is what’s going on with you, but I’d double check that all the files are where they need to be.

 

Richard

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Saturday, December 9, 2017 7:24 AM
To: main@jfw.groups.io
Subject: goldwave 631 and jaws

 

Hi guys:

I am using jaws 2018 win10 and goldwave 631.

 

I have the goldwave v5 scrips script version 1.6 by lee and others;

Is this the correct set of scripts I should have, or are there others floating around somewhere?

 

When I open a file in goldwave, or goldwave itself, jaws says the percentage as it decompresses the file;

However, once file is open and ready for editing,

The keys to read cursors and other things are not working;

For instance, shift-alt-s is supposed to read the start marker position;

Shift-alt-f is supposed to read the finish marker positions;

Neither of these key combinations nor others operate this way;

Also when arrowing through the file, nothing is read.

 

It kind of feels like the areas of screen that hold all this info is not congruent with the areas expected by the scripts to gather such info.

 

I hope this makes sense;

S O S

Am trying to maneuver through hours of class lectures for Tuesday’s final exam.

 

Any assistance will most certainly be appreciated as time is of essence.

 

Thank you muchly.

 

Mike M.

 


Re: jaws 2018 does not read items in task bar #cal-notice

Bill Lenfestey
 

I found the problem.  Somehow the resolution of the monitor had been changed to 1900 to 1600.  Once I reset the resolution th 1024 by 768, problem resolved.  Thanks  


Re: jaws 2018 does not read items in task bar #cal-notice

Bill Lenfestey
 

First, I hold down the alt key without releasing it when I try to tab through the task bar.  One of the first things I tried when I noticed this problem was using Insert F10 to open the "windows list."  Jaws does not read the "windows list" as a choice.  Again,  the only two choices that are listed in the task bar that Jaws reads are the two most recently launched programs--(with the exception of the "windows list" which is not read.  This reminds me of the pre-wondows "dos" days when we could only see one program at a time on screen or with Jaws.  Thanks  


Re: jaws 2018 does not read items in task bar #cal-notice

Sieghard Weitzel <sieghard@...>
 

Do you let go after you press Alt+Tab? If so then Jaws will only cycle back and forth between the two most recent programs. You have to continue to h old down the Alt Key and then press tab, I have no issues with Jaws reading 10 open folders and applications and browser windows if I have that many open and I have not heard about this being an issue.

Keep in mind that if you have lots of stuff open Jaws Kewy+F10 can also be useful and maybe less confusing if you want to find a particular program or open folder, it shows all your open stuff in a list view.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Bill Lenfestey
Sent: Saturday, December 9, 2017 9:41 PM
To: main@jfw.groups.io
Subject: jaws 2018 does not read items in task bar #cal-notice

 

I have just installed Jaws 2018 for the first time.  When I use Alt Tab to move through the task bar Jaws only reads the two most recently launched programs, although several programs may be running.  Does anyone know how to fix this?  Thanks. 


jaws 2018 does not read items in task bar #cal-notice

Bill Lenfestey
 

I have just installed Jaws 2018 for the first time.  When I use Alt Tab to move through the task bar Jaws only reads the two most recently launched programs, although several programs may be running.  Does anyone know how to fix this?  Thanks. 


blocking messages

Sandra Streeter
 

Hello,
 
Using Windows LiveMail and JAWS 16, how do I set a message rule to delete or block messages with particular wording in the subject line? Thanks!
 
 
Sandra

“If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music he hears, however measured or far away.”
(Henry David Thoreau)

Virus-free. www.avast.com


Re: Disk imaging accessible software

 

Hello,

Yes. But, can I activate Narrator on it?

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Jonas Voll
Sent: Thursday, December 7, 2017 5:11 PM
To: main@jfw.groups.io
Subject: Re: Disk imaging accessible software

Did you get the PE to boot?
Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
https://nam03.safelinks.protection.outlook.com/?url=www.envisionus.com&data=02%7C01%7C%7C11cc6857dfc441bcc50f08d53d84c9a2%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636482562878871801&sdata=KE%2Fv%2BGxVvTxT2UWG63469ucMdn96rSJ7MJ%2FfswWHkH8%3D&reserved=0

Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Adi Kushnir
Sent: Thursday, December 7, 2017 9:08 AM
To: main@jfw.groups.io
Subject: Re: Disk imaging accessible software

Hello,

Any advice on that?

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Adi Kushnir
Sent: Wednesday, December 6, 2017 11:19 PM
To: main@jfw.groups.io
Subject: Re: Disk imaging accessible software

Hello,

I tried to create a WinPe and WinRe copy with IFW, but Narrator does not come up. How do you recommend using this copy in an accessible way?

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Gudrun Brunot
Sent: Tuesday, December 5, 2017 12:35 AM
To: main@jfw.groups.io
Subject: Re: Disk imaging accessible software

I have tried OnePassword a year or so ago, but I didn't quite see how it would help: Sure, it gave me a place to save all the passwords in a vault, but I never got automatic logging in to work. That meant I still had to go to my old luddite source (paper, braillenote file, or whatever I had) to find that Amazon or Bookshare password and type it in. And I must say the developers seemed super nice and willing to make improvements, yet I parted ways with OnePassword.

What did I miss?


Gudrun

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Steve Matzura
Sent: Monday, December 04, 2017 1:08 PM
To: main@jfw.groups.io
Subject: Re: Disk imaging accessibil software

Thanks fo the recommendation. I've been looking for something like this for years. Web passwords and credit cards I give to 1Password.
Registration strings for software I tend to put into plain-text files.
Not secure, I know, but for most of them, the thief would have to sign into accounts that are unknown.


On 12/4/2017 9:42 AM, Jonas Voll wrote:
Hey Steve. Nice demo!
I hope you do not have all your keys and passwords in plane text files on your pc!
Check out Keepass!
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.
youtube.com%2Fwatch%3Fv%3DhqS9MVEN4QY&data=02%7C01%7Cadikushnir%40outl
ook.com%7C3a8262b641c3473fb5e108d53b6755b6%7C84df9e7fe9f640afb435aaaaa
aaaaaaa%7C1%7C0%7C636480237355878743&sdata=P3ERc9YtZKKOb5c3jP9Qz8ON1mw
8iXGyd%2FNz6B4ccj0%3D&reserved=0


Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
https://eur01.safelinks.protection.outlook.com/?url=www.envisionus.com
&data=02%7C01%7Cadikushnir%40outlook.com%7C3a8262b641c3473fb5e108d53b6
755b6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636480237355878743&
sdata=vRuSdB26rDgiawNwVLK1ivwpD5n1i7uPAzlgWwEJBd0%3D&reserved=0

Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
george b
Sent: Saturday, December 2, 2017 10:46 AM
To: main@jfw.groups.io
Subject: Re: Disk imaging accessibil software

LOL dave I haven't heard that line in a while remember some got perty outraged when I used that years ago...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dave...
Sent: December 2, 2017 8:37
To: main@jfw.groups.io
Subject: Re: Disk imaging accessibil software

Doug,

Try using Google to look it up. Google is your friend.

Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer


----- Original Message -----
From: "douglas richard dexheimer" <drichardd@earthlink.net>
To: <main@jfw.groups.io>
Sent: Friday, December 01, 2017 17:14
Subject: Re: Disk imaging accessibil software


whatever that word means?

Douglas Richard Dexheimer
Chief of Braille Productions
Born-Again Productions
The Friedman Place, Apt.308
5527 N. Maplewood Ave.
Chicago, IL 60625
home phone 773-409-6163
cell phone 913-244-0612
drichardd@earthlink.net

On 12/1/2017 6:50 PM, Mario wrote:
Mahalo.

-------- Original Message --------
From: Steve Matzura [mailto:number6@noisynotes.com]
Sent: Friday, Dec 1, 2017 7:24 PM EST
To: main@jfw.groups.io
Subject: Disk imaging accessibil software

Oh, did I fudge that? So sorry! Here it is.

https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww
.dropbox.com%2Fs%2Fgg10t516n0azszx%2FPE%2520Builder.mp3%3Fdl%3D1&data
=02%7C01%7Cadikushnir%40outlook.com%7C3a8262b641c3473fb5e108d53b6755b
6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636480237355878743&sda
ta=GRYDjEkvFTCswHrtXfYcCkUFc8boG2Mm5JxKRJpUjf4%3D&reserved=0



On 12/1/2017 1:03 PM, Mario wrote:
Steve, I don't remember seeing a link to get your demo. could you
resend it please?
TIA

------- Original Message --------
From: Steve Matzura [mailto:number6@noisynotes.com]
Sent: Monday, Nov 27, 2017 9:53 AM EST
To: main@jfw.groups.io
Subject: Disk imaging accessibil software

Yes, that is correct. The reason for having to do this is that,
unlike other backup/restore solutions that can run from the boot
drive when restoring the boot drive, Terabyte works diferently. In
other words, the drive to which you are restoring cannot be the drive that is booted.
That's why you have to run the PE Builder to create a standalone copy
of IFW. I created a short audio on how to do it. I will dig it out
and post a link to it so you can hear how it's done.


On 11/27/2017 9:41 AM, Jonas Voll wrote:

So in stepp 2. Use the PE Builder to create a standalone copy of IFW
on a separate drive. It can even be on a USB drive as it's quite small.

Is this to create the software program you will need to restore your
backup?

I will assume it�s a small program from �Terabyte Drive Image
Backup and Restore Suite -
https://eur01.safelinks.protection.outlook.com/?url=http:%2F%2Fwww.terabyteunlimited.com%C3%AF&data=02%7C01%7Cadikushnir%40outlook.com%7C3a8262b641c3473fb5e108d53b6755b6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636480237355878743&sdata=1HW74M%2BWVPMvNozW9orHnnyTDP3RhDZYS72b6QsXfok%3D&reserved=0¿½ that you need to restore from your backups?

JonasVoll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS67213
O: 316-425-7141
F: 316-267-4312
https://eur01.safelinks.protection.outlook.com/?url=www.envisionus.co
m&data=02%7C01%7Cadikushnir%40outlook.com%7C3a8262b641c3473fb5e108d53
b6755b6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6364802373558787
43&sdata=vRuSdB26rDgiawNwVLK1ivwpD5n1i7uPAzlgWwEJBd0%3D&reserved=0
<https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww
.envisionus.com&data=02%7C01%7Cadikushnir%40outlook.com%7C3a8262b641c
3473fb5e108d53b6755b6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63
6480237355878743&sdata=akEIgypWw6%2BVlqi8WHJikts0kmSDX76dKambW4kU38g%
3D&reserved=0>

Envision: To improve the quality of life and provide inspiration and
opportunity for people who are blind or visually impaired through
employment, outreach, rehabilitation, education and research.


*From:*main@jfw.groups.io [mailto:main@jfw.groups.io] *On Behalf Of
*Steve Matzura
*Sent:* Monday, November 27, 2017 8:33 AM
*To:* main@jfw.groups.io
*Subject:* Re: Disk imaging accessibil software

Short version:

Assuming the software was installed, first be sure to check the
"accessible checkboxes" option in Settings. Then:

1. Make a full image backup of the drive in question.

2. Use the PE Builder to create a standalone copy of IFW on a
separate drive. It can even be on a USB drive as it's quite small.

3. Go to
https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
opopanax.net%2Fdownload&data=02%7C01%7Cadikushnir%40outlook.com%7C3a8
262b641c3473fb5e108d53b6755b6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%
7C0%7C636480237355878743&sdata=LXb%2FRgYvL9%2FA3OV2wIfaUw7%2BTbYt090o%2BmZ0wuNzBZ4%3D&reserved=0 and obtain the Windows pre-installation environment creator for your operating system, Windows 7 or 10, 32- or 64-bit, as you'll need this to restore a boot drive. Run the creator and make one, either on a USB thumb drive or DVD. Your system will need to be able to boot from the chosen medium.

When you need to restore:

1. If you're restoring the boot drive, boot the PE you created in
Step 2, then run the standalone copy of IFW you created in Step 3.
Otherwise, run the installed copy.

2. Choose the restore function, automatic restore. Follow the prompts.

On 11/27/2017 9:06 AM, Jonas Voll wrote:

Can you give us some exampels of how one can use this software to
restor a harddrive that�s is the main boot harddrive from a backup
job?

*Jonas Voll*
Support Technician I
*Envision, Inc.*
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312

https://eur01.safelinks.protection.outlook.com/?url=www.envisionus.co
m&data=02%7C01%7Cadikushnir%40outlook.com%7C3a8262b641c3473fb5e108d53
b6755b6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6364802373558787
43&sdata=vRuSdB26rDgiawNwVLK1ivwpD5n1i7uPAzlgWwEJBd0%3D&reserved=0
<https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww
.envisionus.com&data=02%7C01%7Cadikushnir%40outlook.com%7C3a8262b641c
3473fb5e108d53b6755b6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63
6480237355878743&sdata=akEIgypWw6%2BVlqi8WHJikts0kmSDX76dKambW4kU38g%
3D&reserved=0>

*Envision: */To improve the quality of life and provide
inspiration and opportunity for people who are blind or visually
impaired through employment, outreach, rehabilitation, education
and research./

*From:*main@jfw.groups.io <mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] *On Behalf Of *Steve Matzura
*Sent:* Monday, November 27, 2017 7:56 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: Disk imaging accessibil software

Terabyte Drive Image Backup and Restore Suite -

https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
terabyteunlimited.com&data=02%7C01%7Cadikushnir%40outlook.com%7C3a826
2b641c3473fb5e108d53b6755b6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C
0%7C636480237355878743&sdata=tfjsnxsGOrGtqkesev%2BSF7%2BUo6wr9E%2F5Ph
2DPeQNu1s%3D&reserved=0
<https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww
.terabyteunlimited.com&data=02%7C01%7Cadikushnir%40outlook.com%7C3a82
62b641c3473fb5e108d53b6755b6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
C0%7C636480237355878743&sdata=tfjsnxsGOrGtqkesev%2BSF7%2BUo6wr9E%2F5P
h2DPeQNu1s%3D&reserved=0>

On 11/25/2017 4:22 PM, Nino Dagostino wrote:

Hi:

This is Nino, does anybody know of backup and restore that can
be used by Jaws or Nvda.

I can backup the computer I just cant restore it with out
sighted assistance.

I have a dell xps8900 desktop computer running windows10.

Thank you in advance.

Have a good day.


SonicWall identified this message as clean.

To manage your junk mail go tohttps://nospam.envisionus.com
and

logon with your domain userid and password.

If you consider this email to be spam please forward it to

'spam@nospam.envisionus.com <mailto:spam@nospam.envisionus.com>'

*NOTICE:*This electronic mail message and any attached files are
confidential. The information is exclusively for the use of the
individual or entity intended as the recipient. If you are not the
intended recipient, any use, copying, printing, reviewing,
retention, disclosure, distribution or forwarding of the message
or any attached file is not authorized and is strictly prohibited.
If you have received this electronic mail message in error, please
advise the sender by reply electronic mail immediately and
permanently delete the original transmission, any attachments and
any copies of this message from your computer system.












.












NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.














NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.


iTunes importing question about Jaws speech

Richard Turner <richardturner42@...>
 

When I am importing CD’s into iTunes, and I look at the total tracks and time by tabbing beyond the list of tracks to the spot that says, for example, 14 song 39:11 total time.

Jaws says “39 hours and 11 minutes” instead of “39 minutes and 11 seconds” which is what it is.

 

Is there a setting that would fix this?

 

Thanks,

Richard

 

 


Re: goldwave 631 and jaws

Richard Turner <richardturner42@...>
 

No need to apologize.  I am a recent prisoner of Jaws having been a Window-eyes user for over 20 years and had to learn this just a few months ago.

 

On Windows 10, the way I learned it was to tap the Windows key to bring up the search box.

I then arrow down a little ways into the list of apps and hit the letter j, then continue arrowing to Jaws 2018, or Jaws 18, whichever.

At the Jaws version you have it will say folder collapsed.

Hit the space bar.

Arrow down once to utilities and hit enter.

Then arrow down to explore scripts.

You want the ENU folder, which is the English US assuming that is where you are.

Once in that folder, you can check for the Goldwave script files.

If they are not there, just copy them into that folder and restart Jaws.

Now, all should be well.

 

I believe there is a way to get there from the Jaws menus.

O yes, and have GoldWave closed when you do this just to be sure.

 

HTH,

Richard

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Saturday, December 9, 2017 9:45 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

Ok my friend:

 

I must first apologize for demonstrating my incompetence.

 

First, how do I explore scripts?

Do I do it from within gw? And if so what keys do I hit or whatever to see if my scripts are there?

 

Second, what folder would I copy them into assuming they are not in the correct place already?

 

In sum, step-by-step instructions would most be appreciated.  Maybe wire off list?

 

Mike M.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, December 9, 2017 11:06 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

I’m not sure when this happened, but I suspect it was when I updated from Jaws 18, but my GoldWave wasn’t responding to the keystrokes.

I checked under Explore Scripts and the GoldWave script files were not there.

I copied them into the folder and now all works correctly.

 

I guess I am familiar enough with GoldWave that I worked around it the few times I’ve used GoldWave since I upgraded to 2018.

 

 

I’m not sure if that is what’s going on with you, but I’d double check that all the files are where they need to be.

 

Richard

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Saturday, December 9, 2017 7:24 AM
To: main@jfw.groups.io
Subject: goldwave 631 and jaws

 

Hi guys:

I am using jaws 2018 win10 and goldwave 631.

 

I have the goldwave v5 scrips script version 1.6 by lee and others;

Is this the correct set of scripts I should have, or are there others floating around somewhere?

 

When I open a file in goldwave, or goldwave itself, jaws says the percentage as it decompresses the file;

However, once file is open and ready for editing,

The keys to read cursors and other things are not working;

For instance, shift-alt-s is supposed to read the start marker position;

Shift-alt-f is supposed to read the finish marker positions;

Neither of these key combinations nor others operate this way;

Also when arrowing through the file, nothing is read.

 

It kind of feels like the areas of screen that hold all this info is not congruent with the areas expected by the scripts to gather such info.

 

I hope this makes sense;

S O S

Am trying to maneuver through hours of class lectures for Tuesday’s final exam.

 

Any assistance will most certainly be appreciated as time is of essence.

 

Thank you muchly.

 

Mike M.

 


Re: goldwave 631 and jaws

mike mcglashon
 

Ok my friend:

 

I must first apologize for demonstrating my incompetence.

 

First, how do I explore scripts?

Do I do it from within gw? And if so what keys do I hit or whatever to see if my scripts are there?

 

Second, what folder would I copy them into assuming they are not in the correct place already?

 

In sum, step-by-step instructions would most be appreciated.  Maybe wire off list?

 

Mike M.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, December 9, 2017 11:06 AM
To: main@jfw.groups.io
Subject: Re: goldwave 631 and jaws

 

I’m not sure when this happened, but I suspect it was when I updated from Jaws 18, but my GoldWave wasn’t responding to the keystrokes.

I checked under Explore Scripts and the GoldWave script files were not there.

I copied them into the folder and now all works correctly.

 

I guess I am familiar enough with GoldWave that I worked around it the few times I’ve used GoldWave since I upgraded to 2018.

 

 

I’m not sure if that is what’s going on with you, but I’d double check that all the files are where they need to be.

 

Richard

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Saturday, December 9, 2017 7:24 AM
To: main@jfw.groups.io
Subject: goldwave 631 and jaws

 

Hi guys:

I am using jaws 2018 win10 and goldwave 631.

 

I have the goldwave v5 scrips script version 1.6 by lee and others;

Is this the correct set of scripts I should have, or are there others floating around somewhere?

 

When I open a file in goldwave, or goldwave itself, jaws says the percentage as it decompresses the file;

However, once file is open and ready for editing,

The keys to read cursors and other things are not working;

For instance, shift-alt-s is supposed to read the start marker position;

Shift-alt-f is supposed to read the finish marker positions;

Neither of these key combinations nor others operate this way;

Also when arrowing through the file, nothing is read.

 

It kind of feels like the areas of screen that hold all this info is not congruent with the areas expected by the scripts to gather such info.

 

I hope this makes sense;

S O S

Am trying to maneuver through hours of class lectures for Tuesday’s final exam.

 

Any assistance will most certainly be appreciated as time is of essence.

 

Thank you muchly.

 

Mike M.

 


Re: Microsoft Word 2016 Tutorial

Jason White
 

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Christi Payne
Sent: Friday, December 8, 2017 4:55 PM
To: main@jfw.groups.io
Subject: Re: Microsoft Word 2016 Tutorial

Thank you. That is really good to know.

Christi

-----Original Message-----
From: Gudrun Brunot
Sent: December 08, 2017 04:20 PM
To: main@jfw.groups.io
Subject: Re: Microsoft Word 2016 Tutorial

I've taken several of Cathy Anne's tutorials, and they are good, and she is receptive to questions and responds promptly and helpfully.



Gudrun


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Steve Griffiths
Sent: Friday, December 08, 2017 6:03 AM
To: main@jfw.groups.io
Subject: Re: Microsoft Word 2016 Tutorial


Hi Alton,



Not a recommendation in that I haven't read it myself, but Cathy Anne Murtha, who trades as the Access Technology Institute, does Office manuals aimed at screen reader users and I've heard good feedback about them in general.



There is one on Word 2016 with JAWS. I don’t know which version of JAWS is used, but the link below leads to a table of contents which details the functionality covered.



http://www.blind.training/downloads/an-immersion-into-word-2016-with-jaws-for-windows/



Thanks,

Steve 🐾



From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Coleman, Alton A
Sent: 06 December 2017 15:29
To: main@jfw.groups.io
Subject: Microsoft Word 2016 Tutorial



Good morning,

Can anyone recommend a really good, comprehensive tutorial for using Microsoft Word 2016 with JAWS 18?

Something that deals with beginner and advanced functionality, and everything in between, as well as keyboard shortcuts?

Thanks for any feedback you can provide.



AC




This email and any attachment to it are confidential. Unless you are the intended recipient, you may not use, copy or disclose either the message or any information contained in the message.
If you are not the intended recipient, you should delete this email and notify the sender immediately.
Any views or opinions expressed in this email are those of the sender only, unless otherwise stated.
All emails, incoming and outgoing, may be recorded by Guide Dogs and monitored for legitimate business purposes.
Guide Dogs exclude all liability for any loss or damage arising or resulting from the receipt, use or transmission of this email to the fullest extent permitted by law.

The Guide Dogs for the Blind Association
Tel: 0118 983 5555
Email: guidedogs@guidedogs.org.uk
Website: https://www.guidedogs.org.uk
Registered Office: Hillfields, Burghfield Common, Reading, Berkshire, RG7 3YG.
A company limited by guarantee, registered in England and Wales (291646) and a charity registered in England and Wales (209617) and Scotland (SC038979).


Re: way to delete a contact microsoft outlook 2016

Tom Behler
 

This is what I do as well.

 

Dr.  Tom Behler from Michigan

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard Weitzel
Sent: Saturday, December 09, 2017 10:08 AM
To: main@jfw.groups.io
Subject: Re: way to delete a contact microsoft outlook 2016

 

Not sure I understand the problem, when I go to Contacts in Outlook and want to delete somebody I just press the delete key same as when I delete an email in the Inbox.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marvin Hunkin via Groups.Io
Sent: Friday, December 8, 2017 9:52 PM
To: main@jfw.groups.io
Subject: way to delete a contact microsoft outlook 2016

 

Hi. looked in the contacts and only got two categories. Did look in the people app and then deleted the people I did not like. So how to select a contact and then delete it forever, using Microsoft outlook 2016. Did try googling or looking for help. But no easy way.

Thanks.

 

 

Virus-free. www.avast.com