Date   

Re: Surprising mispronunciation with Nathan compact voice

Van Lant, Robin
 

Interesting. I'm not on my JAWS computer at the moment, but I was using Nathan Compact.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mike Rogers
Sent: Thursday, November 30, 2017 9:40 AM
To: main@jfw.groups.io
Subject: Re: Surprising mispronunciation with Nathan compact voice

mail male I'm using Nathan premium and he pronounces both ways correctly. But Regina is pronounced withthe long I. You can always use pronunciation dictionary to change that.

********************************

www.harmonicaworkshops.com



On Thu, 30 Nov 2017 16:33:14 +0000
"Van Lant, Robin via Groups.Io" <Robin_Van_Lant=Key.com@groups.io> wrote:

I'm using the Volcalizer Expressive voices and am surprised to find that Nathan mispronounces the word "male" - as in I have a male Yellow lab guide dog. Instead of saying it as "mail" (homonym to what the post office delivers), it says "ma lay". So strange! It says female correctly. The other American voices I have tried do not say it incorrectly.

I've also noticed that all of the voices I have tried say the girl's name Regina like the city in Canada, as opposed to Regeena. Funny how synthesizers are programmed.

So, on this note, where do I change pronunciations? A search in the settings did not turn up anything obvious.





Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114 If you prefer not to receive
future e-mail offers for products or services from Key send an e-mail
to mailto:DNERequests@key.com with 'No Promotional E-mails' in the
SUBJECT line.


Re: Surprising mispronunciation with Nathan compact voice

Mike Rogers
 

mail male I'm using Nathan premium and he pronounces both ways correctly. But Regina is pronounced withthe long I. You can always use pronunciation dictionary to change that.

********************************

www.harmonicaworkshops.com



On Thu, 30 Nov 2017 16:33:14 +0000
"Van Lant, Robin via Groups.Io" <Robin_Van_Lant=Key.com@groups.io> wrote:

I'm using the Volcalizer Expressive voices and am surprised to find that Nathan mispronounces the word "male" - as in I have a male Yellow lab guide dog. Instead of saying it as "mail" (homonym to what the post office delivers), it says "ma lay". So strange! It says female correctly. The other American voices I have tried do not say it incorrectly.

I've also noticed that all of the voices I have tried say the girl's name Regina like the city in Canada, as opposed to Regeena. Funny how synthesizers are programmed.

So, on this note, where do I change pronunciations? A search in the settings did not turn up anything obvious.





Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional E-mails' in the
SUBJECT line.


Re: JAWS and Malwarebytes

Steve Matzura
 

Or you can type MALW from the Windows 7/10 Start menu search field.

On 11/29/2017 2:49 PM, Robert Logue wrote:
Not using Malwarebytes right now. But I think you can get to the menus from the system tray.  See if it shows up there.  Then right click or press context key and use arrows to bring up a menu. Sorry my memory isn't more precice.


Bob


On 2017-11-27 6:40 AM, Ibrahim Ajayi wrote:
Hello:
Does anyone use malwarebytes.  I've just installed it on my computer,
and it is not working.  Each time I attempt to use it, it does not
open.
I use JAWS16, and I use windows 7-32bit.
If anyone uses it, how do you use it.  I launched it from the start
menu, and also from the all programs submenu, but as I said it didn't
open.
Please help if you can.
 From Ibrahim.




Surprising mispronunciation with Nathan compact voice

Van Lant, Robin
 

I’m using the Volcalizer Expressive voices and am surprised to find that Nathan mispronounces the word “male” – as in I have a male Yellow lab guide dog.  Instead of saying it as “mail” (homonym to what the post office delivers), it says “ma lay”.  So strange!  It says female correctly.  The other American voices I have tried do not say it incorrectly. 

 

I’ve also noticed that all of the voices I have tried say the girl’s name Regina like the city in Canada, as opposed to Regeena.   Funny how synthesizers are programmed. 

 

So, on this note, where do I change pronunciations?  A search in the settings did not turn up anything obvious.

 

 

 

 

 

Robin Van Lant | Sr. Program Manager

Strategy & Performance Management | Key Equipment Finance

720-304-1060 | Robin_Van_Lant@...

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


Selecting Tables in HTML or pdf

Shannon
 

Hi all,

I have a pdf that tells me that it has a table with  7 columns and 28 rows.

Can I select this table to copy it into excel?

 

Thanks

Shannon

 


Re: Updates left

Richard Turner
 

On my 2018 version, I do the jaws key, hit alt, then h, then arrow to about and hit enter.
I then tab to the read only box after the locking code and can arrow up to the updates remaining, etc.


Richard

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kevin Hourigan
Sent: Thursday, November 30, 2017 6:25 AM
To: main@jfw.groups.io
Subject: Re: Updates left

I did that and found the information, but Jaws reads everything all at once,
and I was not able to use the arrow keys so I needed to redo it a few times
to be sure of the answer. But you say that you are able to arrow down line
by line?
Thanks Kevin.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Carolyn
Arnold
Sent: November 29, 2017 5:34 PM
To: main@jfw.groups.io
Subject: Re: Updates left

1. PPress Jaws Key+j.
2. Arrow up two or three times to About.
3. Enter.
4. Arrow down for information including your version, cereal number,
updates, etc.

Best from,

Carolyn



-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Alan
Robbins
Sent: Wednesday, November 29, 2017 6:37 PM
To: main@jfw.groups.io
Subject: Re: Updates left

Go to menus and choose about. Lots of pertinent info there



Al



From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kevin
Hourigan
Sent: Wednesday, November 29, 2017 6:15 PM
To: main@jfw.groups.io
Subject: Updates left



How does one check to see how many updates one has left in one's SMA,
please?

Thank you,

Kevin.


Re: FS Cast

Steve Matzura
 

Sorry mate, wrong person.


On 11/29/2017 10:58 AM, Dave Durber wrote:
Hello Bill:
 
Tap the Windows key and type
 
Default programs
 
and press enter, then she should follow the instructions.
 
Sincerely:
 
Dave Durber
 
----- Original Message -----
From: Bill White
Sent: Sunday, September 17, 2017 6:02 PM
Subject: Re: FS Cast

Hi, Margaret. Try the following keystroke:

 

Press the Windows key and type the words control panel into the search box until JAWS says:

 

Control Panel Desktop App.

 

Then press ENTER. You will then be in the Control Panel.

 

Bill White

Billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Margaret Johnson
Sent: Sunday, September 17, 2017 10:39 AM
To: main@jfw.groups.io
Subject: Re: FS Cast

 

Hello,

 

Please tell me what key stroke to use for the control panel.

 

Thank you,

Margaret

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mike B.
Sent: Saturday, September 16, 2017 5:10 PM
To: main@jfw.groups.io
Subject: Re: FS Cast

 

Hi Carol,

 

I don't know which method you're using to make WinAmp your default player, but below are the steps I use to set my default programs:

 

Try the following:

1. Go to the control panel, then find, Default Programs Link, & press enter.

2. Tab to, Set Your Default Programs Link, & press enter.  Wait a few seconds for the list to populate.

3. Tab 1 time into, List View, & you should have a list of programs.  Arrow down to, WinAmp, & tab to, Set This Program As Default button, & press the spacebar.

4. Tab to, Choose Defaults for this Program button, & press the spacebar.

5. Press the spacebar on the, Select All, checkbox to check it, tab to the, Save button, & press the spacebar.

6. Tab to the, Okay button, press the spacebar, & Press, Alt + F4, to close.

Take care.  Mike.  Go Dodgers!
Sent from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----

Sent: Saturday, September 16, 2017 10:09 AM

Subject: Re: FS Cast

 

Yes, it should, but I never found one.  That is why I keep it disabled.

Carol


On 9/16/2017 11:19 AM, Soronel Haetir wrote:
> It could also be that jaws is actually running media player rather
> than relying on windows to choose a program.
>
> Media player should, however, have a setting where it accepts not
> being the default player and then it won't ask again if it happens to
> not be the default.
>
> On 9/16/17, Randy Barnett <randy@...> wrote:
>> Just uninstall it. add/remove programs then shift tab to change windows
>> options or features then in the lis uncheck Windows Media Player. Thhis
>> will remove it completly
>> On 9/15/2017 5:36 PM, Carol Smith via Groups.Io wrote:
>>> Yes, and I don't even have media player configured.  Winamp is
>>> directed to always be the default player.  Normally, if I do need
>>> media player, I find myself having to go through the setup and then I
>>> remove it again when I no longer need it.  Well, I don't actually
>>> remove it, I just disable it in the Windows features.  I should maybe
>>> add that I am running Win7 on a desktop pc.
>>>
>>> Carol
>>>
>>>
>>>
>>> On 9/15/2017 4:12 PM, Walker, Michael E wrote:
>>>> My bad in how I asked the question. Do you have Winamp configured as
>>>> your default media player?
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>
>>
>>
>>
>



Re: Updates left

Kevin Hourigan <kevinthourigan@...>
 

I did that and found the information, but Jaws reads everything all at once,
and I was not able to use the arrow keys so I needed to redo it a few times
to be sure of the answer. But you say that you are able to arrow down line
by line?
Thanks Kevin.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Carolyn
Arnold
Sent: November 29, 2017 5:34 PM
To: main@jfw.groups.io
Subject: Re: Updates left

1. PPress Jaws Key+j.
2. Arrow up two or three times to About.
3. Enter.
4. Arrow down for information including your version, cereal number,
updates, etc.

Best from,

Carolyn



-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Alan
Robbins
Sent: Wednesday, November 29, 2017 6:37 PM
To: main@jfw.groups.io
Subject: Re: Updates left

Go to menus and choose about. Lots of pertinent info there



Al



From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kevin
Hourigan
Sent: Wednesday, November 29, 2017 6:15 PM
To: main@jfw.groups.io
Subject: Updates left



How does one check to see how many updates one has left in one's SMA,
please?

Thank you,

Kevin.


Re: best way to regain speech if JAWS is silent?

Jonas Voll
 

At the minimum evry one needs at least a portable copy of NVDA on the system, for backup!


Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Paul Hunt
Sent: Thursday, November 30, 2017 7:33 AM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

Hello. JawsKey+WindowsKey+f4 doesn’t work and JAWS doesn’t restart. If I start Narrator and kill the Jaws process I can restart Jaws. The problem is Narrator is too verbose in the Task Manager.

On Nov 29, 2017, at 9:39 PM, Sieghard Weitzel <sieghard@live.ca> wrote:

Just starting Jaws may not be the solution if Jaws has crashed and is displaying some error message. For the most part if you wait long enough Jaws restarts by itself and by "long enough" I mean at least 30 or 40 seconds. After that you can try Jaws Key+Alt+F4, this unloads and reloads Jaws. If that doesn't work you can definitely try to simply launch Jaws either using the Run command as described, Windows+R then type Jaws18 or Jaws2018 and press enter or you can of course set a shortcut key combination like Control+Alt+J.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Alan
Robbins
Sent: Wednesday, November 29, 2017 4:50 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

I usually just do a run line command (windows key plus letter r) then type the word jaws followed by version number with no spaces between the word jaws and version number. So to start most current version, the run dialogue box would read following line:
Jaws2018

Once typed simply hit enter and it is up and running.

Al

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Mario
Sent: Wednesday, November 29, 2017 7:45 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

need to go to the JAWS window. from anywhere, you could press to
insert+f4 and press the spacebar, then control+alt+j or however you
insert+want
to start JAWS.


-------- Original Message --------
From: Van Lant, Robin via Groups.Io
[mailto:Robin_Van_Lant=Key.com@groups.io]
Sent: Wednesday, Nov 29, 2017 7:10 PM EST
To: main@jfw.groups.io
Subject: best way to regain speech if JAWS is silent?

What is the best way to regain speech if JAWS goes silent? IN later
versions of Window Eyes, I could just hit the launch hotkeys of
Control Alt W and WE would restart, but this doesn't' work with JAWS.
It seems that Control Alt J may be bringing up the JAWS home screen
(or whatever it's called) and then I can hit Alt F4 to close it, but
is this the best way?



Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If
you are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information. If
you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether
electronic or hard copy. This communication may contain nonpublic
personal information about consumers subject to the restrictions of
the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse
or redisclose such information for any purpose other than to provide
the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114 If you prefer not to receive
future e-mail offers for products or services from Key send an e-mail
to mailto:DNERequests@key.com with 'No Promotional E-mails' in the
SUBJECT line.















SonicWall identified this message as clean.
To manage your junk mail go to https://nospam.envisionus.com
and
logon with your domain userid and password.
If you consider this email to be spam please forward it to
'spam@nospam.envisionus.com'
NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.


Re: best way to regain speech if JAWS is silent?

Paul Hunt <prhunt1@...>
 

Hello. JawsKey+WindowsKey+f4 doesn’t work and JAWS doesn’t restart. If I start Narrator and kill the Jaws process I can restart Jaws. The problem is Narrator is too verbose in the Task Manager.

On Nov 29, 2017, at 9:39 PM, Sieghard Weitzel <sieghard@live.ca> wrote:

Just starting Jaws may not be the solution if Jaws has crashed and is displaying some error message. For the most part if you wait long enough Jaws restarts by itself and by "long enough" I mean at least 30 or 40 seconds. After that you can try Jaws Key+Alt+F4, this unloads and reloads Jaws. If that doesn't work you can definitely try to simply launch Jaws either using the Run command as described, Windows+R then type Jaws18 or Jaws2018 and press enter or you can of course set a shortcut key combination like Control+Alt+J.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Alan Robbins
Sent: Wednesday, November 29, 2017 4:50 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

I usually just do a run line command (windows key plus letter r) then type the word jaws followed by version number with no spaces between the word jaws and version number. So to start most current version, the run dialogue box would read following line:
Jaws2018

Once typed simply hit enter and it is up and running.

Al

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Wednesday, November 29, 2017 7:45 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

need to go to the JAWS window. from anywhere, you could press to
insert+f4 and press the spacebar, then control+alt+j or however you want
to start JAWS.


-------- Original Message --------
From: Van Lant, Robin via Groups.Io
[mailto:Robin_Van_Lant=Key.com@groups.io]
Sent: Wednesday, Nov 29, 2017 7:10 PM EST
To: main@jfw.groups.io
Subject: best way to regain speech if JAWS is silent?

What is the best way to regain speech if JAWS goes silent? IN later
versions of Window Eyes, I could just hit the launch hotkeys of Control
Alt W and WE would restart, but this doesn't' work with JAWS. It seems
that Control Alt J may be bringing up the JAWS home screen (or whatever
it's called) and then I can hit Alt F4 to close it, but is this the best
way?



Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you
are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information. If
you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether electronic
or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or
redisclose such information for any purpose other than to provide the
services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or
services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional
E-mails' in the
SUBJECT line.












Re: best way to regain speech if JAWS is silent?

Michael Mote
 

It really depends on why JAWS stopped talking.  If there is an error, JAWS can sometimes restart itself, and begin talking after about 60 seconds.  If it is more serious than that, you may consider starting Narrator to figure out what’s happening.  Perhaps, you can get enough speech to determine if you have an error message on the screen.  In Windows 10, you launch Narrator by pressing Control Windows and enter all together.  Hope this is helpful!

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Van Lant, Robin via Groups.Io
Sent: Wednesday, November 29, 2017 7:11 PM
To: main@jfw.groups.io
Subject: best way to regain speech if JAWS is silent?

 

What is the best way to regain speech if JAWS goes silent?  IN later versions of Window Eyes, I could just hit the launch hotkeys of Control Alt W and WE would restart, but this doesn’t’ work with JAWS.  It seems that Control Alt J may be bringing up the JAWS home screen (or whatever it’s called) and then I can hit Alt F4 to close it, but is this the best way?

 

 

 

Robin Van Lant | Sr. Program Manager

Strategy & Performance Management | Key Equipment Finance

720-304-1060 | Robin_Van_Lant@...

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


Re: cannot get key label muting to work

Michael Mote
 

Have you tried turning off key echo in the set-up wizard?

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Van Lant, Robin via Groups.Io
Sent: Thursday, November 30, 2017 12:34 AM
To: main@jfw.groups.io
Subject: cannot get key label muting to work

 

I’m trying to get JAWS to stop voicing Control, Shift, Alt and tab each time I hit them, especially when alt tabbing through open programs. I followed the directions I had seen here to search for Label in the settings center and found the list of keys with their status.  I changed the setting for Tab to Mute, but it’s still saying it.  Also, when I try to change the setting for Control, Shift and Alt, I get a pop-up saying that I cannot mute these because they are used in combination with other keys.  What am I missing?

 

 

 

Robin Van Lant | Sr. Program Manager

Strategy & Performance Management | Key Equipment Finance

720-304-1060 | Robin_Van_Lant@...

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


Re: Virtual reader help please

Sugar Lopez <sugarsyl71@...>
 

Awesome, thanks

sugar

 

If we could look into each other's hearts and understand the unique challenges each of us faces, I think we would treat each other much more gently, with more love, patience, tolerance, and care.

Marvin J. Ashton

-Sugar

Please support my Journey to a second chance of life at:

https://www.gofundme.com/sugars-transplant-journey

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Bill White
Sent: Monday, November 20, 2017 9:08 AM
To: main@jfw.groups.io
Subject: Re: Virtual reader help please

 

Hi, Sugar. Here’s what the help topic says about the Virtual Viewer check box

 

Show Virtual Viewer on Screen

Use this check box to specify whether the Virtual Viewer is visually displayed on the screen when you access context-sensitive (INSERT+F1) help and other helpful messages. It may be useful in training environments to show the Virtual Viewer. However, in a presentation application like PowerPoint, it might disrupt your presentation to display the Virtual Viewer. JAWS functions the same in these messages regardless of whether the Virtual Viewer is visible. For more information on using the Virtual Viewer, see Virtual Viewer.

 

The key words here are:

 

JAWS functions the same in these messages regardless of whether the Virtual Viewer is visible.

 

If it doesn’t matter to you if the Virtual Viewer is visually displayed on the screen, then it won’t matter if the check box is checked or unchecked. If you want the Virtual Viewer visually displayed on the screen, check the check box. If you think PowerPoint might be used, or that the Virtual Viewer might interfere with the visual display of some programs, uncheck the check box.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sugar Lopez
Sent: Monday, November 20, 2017 7:26 AM
To: main@jfw.groups.io
Subject: Virtual reader help please

 

Hi all

In my jaws settings under basics, should I lleave virtual rader checked?

And what happens if I don’t check it?

Thanks

I use jaws 18 on a windows 7,64 and office 2010

 

 

"But they that wait upon the Lord shall renew their strength; They shall mount up with wings as eagles; They shall run, and not be weary; and They shall

walk, and not faint." [Isaiah 40:31)

 

Please Support my Transplant journey at:

https://www.gofundme.com/sugars-transplant-journey

 

-God Bless you,

Sugar Lopez

 


Re: Jaws update purchase

Cristóbal
 

Yup. I switched to home from Pro a couple of years back.
Saved me $80 on the SMA.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard
Weitzel
Sent: Wednesday, November 29, 2017 7:34 PM
To: main@jfw.groups.io
Subject: Re: Jaws update purchase

The thing is that a lot of people have Jaws Professional still from the days
when you had to have it if you wanted to run the Pro version of Windows. Now
this is no longer the case so it's perfectly OK to ask FS to be downgraded
from Pro to Home and take advantage of the cheaper SMA price.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Carolyn
Arnold
Sent: Wednesday, November 29, 2017 1:32 PM
To: main@jfw.groups.io
Subject: Re: Jaws update purchase

Did you get Pro?

Best from,

Carolyn



-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Onwardbob
Sent: Wednesday, November 29, 2017 2:41 PM
To: main@jfw.groups.io
Subject: Re: Jaws update purchase

Seriously, I just paid $180. for the same!

BOB SOUTAR.ONWARD THRU THE FOG


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of David
Pearson
Sent: Wednesday, November 29, 2017 10:30 AM
To: main@jfw.groups.io
Subject: Jaws update purchase

Howdy:

Just purchased next 2 Jaws releases for $120 + applicable state tax(though
I'm far from profficient on latest release).

Sincerely,



David S. Pearson


Re: cannot get key label muting to work

netbat66
 

in a round about way they can.
you can't mute them. but if you delete the key description then there will be nothing there for it to say. grin.

-----Original Message-----
From: Shai
Sent: Wednesday, November 29, 2017 9:40 PM
To: main@jfw.groups.io
Subject: Re: cannot get key label muting to work

Hi,
Some keys like the control, alt, shift cannot be muted. Also, when
opening the Settings Center, make sure that you are in the default
settings with control plus shift plus d. Finally, after making the
desired changes tab to the apply button and hit enter. Also hit enter
on the ok button in that dialog.
Hope this helps

On 11/29/17, Van Lant, Robin via Groups.Io
<Robin_Van_Lant=Key.com@groups.io> wrote:
I'm trying to get JAWS to stop voicing Control, Shift, Alt and tab each time
I hit them, especially when alt tabbing through open programs. I followed
the directions I had seen here to search for Label in the settings center
and found the list of keys with their status. I changed the setting for Tab
to Mute, but it's still saying it. Also, when I try to change the setting
for Control, Shift and Alt, I get a pop-up saying that I cannot mute these
because they are used in combination with other keys. What am I missing?



Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential information.
It is intended solely for the use of the addressee. If you are not the
intended recipient, you are strictly prohibited from disclosing, copying,
distributing or using any of this information. If you received this
communication in error, please contact the sender immediately and destroy
the material in its entirety, whether electronic or hard copy. This
communication may contain nonpublic personal information about consumers
subject to the restrictions of the Gramm-Leach-Bliley Act. You may not
directly or indirectly reuse or redisclose such information for any purpose
other than to provide the services for which you are receiving the
information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or services
from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional E-mails'
in the
SUBJECT line.


Re: cannot get key label muting to work

Shai
 

Hi,
Some keys like the control, alt, shift cannot be muted. Also, when
opening the Settings Center, make sure that you are in the default
settings with control plus shift plus d. Finally, after making the
desired changes tab to the apply button and hit enter. Also hit enter
on the ok button in that dialog.
Hope this helps

On 11/29/17, Van Lant, Robin via Groups.Io
<Robin_Van_Lant=Key.com@groups.io> wrote:
I'm trying to get JAWS to stop voicing Control, Shift, Alt and tab each time
I hit them, especially when alt tabbing through open programs. I followed
the directions I had seen here to search for Label in the settings center
and found the list of keys with their status. I changed the setting for Tab
to Mute, but it's still saying it. Also, when I try to change the setting
for Control, Shift and Alt, I get a pop-up saying that I cannot mute these
because they are used in combination with other keys. What am I missing?



Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential information.
It is intended solely for the use of the addressee. If you are not the
intended recipient, you are strictly prohibited from disclosing, copying,
distributing or using any of this information. If you received this
communication in error, please contact the sender immediately and destroy
the material in its entirety, whether electronic or hard copy. This
communication may contain nonpublic personal information about consumers
subject to the restrictions of the Gramm-Leach-Bliley Act. You may not
directly or indirectly reuse or redisclose such information for any purpose
other than to provide the services for which you are receiving the
information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or services
from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional E-mails'
in the
SUBJECT line.


cannot get key label muting to work

Van Lant, Robin
 

I’m trying to get JAWS to stop voicing Control, Shift, Alt and tab each time I hit them, especially when alt tabbing through open programs. I followed the directions I had seen here to search for Label in the settings center and found the list of keys with their status.  I changed the setting for Tab to Mute, but it’s still saying it.  Also, when I try to change the setting for Control, Shift and Alt, I get a pop-up saying that I cannot mute these because they are used in combination with other keys.  What am I missing?

 

 

 

Robin Van Lant | Sr. Program Manager

Strategy & Performance Management | Key Equipment Finance

720-304-1060 | Robin_Van_Lant@...

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


Re: best way to regain speech if JAWS is silent?

Van Lant, Robin
 

I'll give these all a try. In the case earlier tonight, I don't think there was an error. My Windows 10 laptop had gone to the locked screen and when I tried to log back in, I couldn't get JAWS to speak. Even after I got logged back in, speech did not return. I have since upgraded to JAWS 2018, so maybe this will fix whatever bug I was encountering.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard Weitzel
Sent: Wednesday, November 29, 2017 8:40 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

Just starting Jaws may not be the solution if Jaws has crashed and is displaying some error message. For the most part if you wait long enough Jaws restarts by itself and by "long enough" I mean at least 30 or 40 seconds. After that you can try Jaws Key+Alt+F4, this unloads and reloads Jaws. If that doesn't work you can definitely try to simply launch Jaws either using the Run command as described, Windows+R then type Jaws18 or Jaws2018 and press enter or you can of course set a shortcut key combination like Control+Alt+J.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Alan Robbins
Sent: Wednesday, November 29, 2017 4:50 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

I usually just do a run line command (windows key plus letter r) then type the word jaws followed by version number with no spaces between the word jaws and version number. So to start most current version, the run dialogue box would read following line:
Jaws2018

Once typed simply hit enter and it is up and running.

Al

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Wednesday, November 29, 2017 7:45 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

need to go to the JAWS window. from anywhere, you could press to
insert+f4 and press the spacebar, then control+alt+j or however you want
to start JAWS.


-------- Original Message --------
From: Van Lant, Robin via Groups.Io
[mailto:Robin_Van_Lant=Key.com@groups.io]
Sent: Wednesday, Nov 29, 2017 7:10 PM EST
To: main@jfw.groups.io
Subject: best way to regain speech if JAWS is silent?

What is the best way to regain speech if JAWS goes silent? IN later versions of Window Eyes, I could just hit the launch hotkeys of Control Alt W and WE would restart, but this doesn't' work with JAWS. It seems that Control Alt J may be bringing up the JAWS home screen (or whatever it's called) and then I can hit Alt F4 to close it, but is this the best way?



Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to mailto:DNERequests@key.com with 'No Promotional E-mails' in the SUBJECT line.


Re: verbosity question

Sugar Lopez <sugarsyl71@...>
 

Thank you Mike.

Sugar

 

If we could look into each other's hearts and understand the unique challenges each of us faces, I think we would treat each other much more gently, with more love, patience, tolerance, and care.

Marvin J. Ashton

-Sugar

Please support my Journey to a second chance of life at:

https://www.gofundme.com/sugars-transplant-journey

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mike B.
Sent: Wednesday, November 29, 2017 8:30 PM
To: main@jfw.groups.io
Subject: Re: verbosity question

 

Hi Sugar,

 

No, not quite.  As you navigate all the various settings, if you make any settings changes you have to tab to the, Okay button, & press enter to save your changes & close.  While arrowing down through all the different options / settings, if you tab 1 time on any of them you'll get a description of that selected option / setting.

Take care.  Mike.  Sent from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----

Sent: Wednesday, November 29, 2017 7:28 PM

Subject: Re: verbosity question

 

Hi Mike

So if I just open up a word ducment

I follow the instructions you gave and it’s done?

Thanks

sugar

 

If we could look into each other's hearts and understand the unique challenges each of us faces, I think we would treat each other much more gently, with more love, patience, tolerance, and care.

Marvin J. Ashton

-Sugar

Please support my Journey to a second chance of life at:

https://www.gofundme.com/sugars-transplant-journey

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mike B.
Sent: Wednesday, November 29, 2017 6:34 PM
To: main@jfw.groups.io
Subject: Re: verbosity question

 

Hi Sugar,

 

Yes, but if you get tables while on the Internet you can use Quick Settings there as well, or any other program that will read tables Quick Settings is there for adjustments.

Take care.  Mike.  Sent from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----

Sent: Wednesday, November 29, 2017 5:12 PM

Subject: Re: verbosity question

 

Hi Mike

Where do I preform this action?

From word?

sugar

 

If we could look into each other's hearts and understand the unique challenges each of us faces, I think we would treat each other much more gently, with more love, patience, tolerance, and care.

Marvin J. Ashton

-Sugar

Please support my Journey to a second chance of life at:

https://www.gofundme.com/sugars-transplant-journey

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mike B.
Sent: Wednesday, November 29, 2017 3:48 PM
To: main@jfw.groups.io
Subject: Re: verbosity question

 

Hi Carol,

 

Open, Quick Settings, with the keystroke, Insert / Jaws key, + V, & navigate to the Table settings to change.

Take care.  Mike.  Sent from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----

Sent: Wednesday, November 29, 2017 12:23 PM

Subject: verbosity question

 

How do I get JAWS to stop saying nesting level and end nesting level
when reading tables?  Thanks.

Carol


Re: verbosity question

Mike B. <mb69mach1@...>
 


Hi Sugar,
 
No, not quite.  As you navigate all the various settings, if you make any settings changes you have to tab to the, Okay button, & press enter to save your changes & close.  While arrowing down through all the different options / settings, if you tab 1 time on any of them you'll get a description of that selected option / setting.
Take care.  Mike.  Sent from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----
Sent: Wednesday, November 29, 2017 7:28 PM
Subject: Re: verbosity question

Hi Mike

So if I just open up a word ducment

I follow the instructions you gave and it’s done?

Thanks

sugar

 

If we could look into each other's hearts and understand the unique challenges each of us faces, I think we would treat each other much more gently, with more love, patience, tolerance, and care.

Marvin J. Ashton

-Sugar

Please support my Journey to a second chance of life at:

https://www.gofundme.com/sugars-transplant-journey

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mike B.
Sent: Wednesday, November 29, 2017 6:34 PM
To: main@jfw.groups.io
Subject: Re: verbosity question

 

Hi Sugar,

 

Yes, but if you get tables while on the Internet you can use Quick Settings there as well, or any other program that will read tables Quick Settings is there for adjustments.

Take care.  Mike.  Sent from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----

From: Sugar Lopez

Sent: Wednesday, November 29, 2017 5:12 PM

Subject: Re: verbosity question

 

Hi Mike

Where do I preform this action?

From word?

sugar

 

If we could look into each other's hearts and understand the unique challenges each of us faces, I think we would treat each other much more gently, with more love, patience, tolerance, and care.

Marvin J. Ashton

-Sugar

Please support my Journey to a second chance of life at:

https://www.gofundme.com/sugars-transplant-journey

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mike B.
Sent: Wednesday, November 29, 2017 3:48 PM
To: main@jfw.groups.io
Subject: Re: verbosity question

 

Hi Carol,

 

Open, Quick Settings, with the keystroke, Insert / Jaws key, + V, & navigate to the Table settings to change.

Take care.  Mike.  Sent from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----

Sent: Wednesday, November 29, 2017 12:23 PM

Subject: verbosity question

 

How do I get JAWS to stop saying nesting level and end nesting level
when reading tables?  Thanks.

Carol