Date   

Re: e-mail address question

david
 

hello;

the only way I know to do this is;

1, highlight the email address you wish to view,
2, press the applications key up arrow enter on properties,
you land on general tab, you need to get to, details,
using the right arrow key,
or, ctrl+tab,
now tab once, go to the top of the page, you should find the email address.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of David
Pearson
Sent: Wednesday, October 25, 2017 9:24 AM
To: main@jfw.groups.io
Subject: Re: e-mail address question

Hi David:

Thanks for the reply, and info. Sometimes, I'd like to know the e-mail
address of a particular sender who's not yet a "contact". Is this possible
with WLM?

Thank you,



DSP

-----Original Message-----
From: david
Sent: Wednesday, October 25, 2017 7:37 AM
To: main@jfw.groups.io
Subject: Re: e-mail address question

hello;
if you want to read an email address from your inbox using windows live
mail,
you will have to do this through the contacts.

1, ctrl+3=contacts,

now you can either do a search, or you can simply down arrow until you hear
the address you wish to read,

once you find the contact which you wish to read,
press the applications key enter on edit contact,
now you're in the summary page,
now use the keystroke, alt+t,
now you can use the tab key to move through the various edit fields, when
you find the email address, you can use the arrow keys, right and left to
read the email address.
when finished? press escape.
now, ctrl+1 to get back into the inbox.

hope this helps.



-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of David
Pearson
Sent: Wednesday, October 25, 2017 12:36 AM
To: main@jfw.groups.io
Subject: e-mail address question

Hello all:

Is there a method to "read" an e-mail address from onelocated in my in-box,
and if yes, how is this done?

Sincerely yours,



David Pearson


Re: e-mail address question

David Pearson
 

Hi David:

Thanks for the reply, and info. Sometimes, I'd like to know the e-mail address of a particular sender who's not yet a "contact". Is this possible with WLM?

Thank you,



DSP

-----Original Message-----
From: david
Sent: Wednesday, October 25, 2017 7:37 AM
To: main@jfw.groups.io
Subject: Re: e-mail address question

hello;
if you want to read an email address from your inbox using windows live
mail,
you will have to do this through the contacts.

1, ctrl+3=contacts,

now you can either do a search, or you can simply down arrow until you hear
the address you wish to read,

once you find the contact which you wish to read,
press the applications key enter on edit contact,
now you're in the summary page,
now use the keystroke, alt+t,
now you can use the tab key to move through the various edit fields, when
you find the email address, you can use the arrow keys, right and left to
read the email address.
when finished? press escape.
now, ctrl+1 to get back into the inbox.

hope this helps.



-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of David
Pearson
Sent: Wednesday, October 25, 2017 12:36 AM
To: main@jfw.groups.io
Subject: e-mail address question

Hello all:

Is there a method to "read" an e-mail address from onelocated in my in-box,
and if yes, how is this done?

Sincerely yours,



David Pearson


Re: looking for Jaws keystroke for WE command

Carol Smith
 

Thank you. This is exactly what I am looking for. Wouldn't I need to route the Jaws cursor before clicking? My Jaws cursor does not always follow my PC cursor.

Carol

On 10/25/2017 8:57 AM, Steve Nutt wrote:
Hi,

OK, here's a thought.

Find the word you want, as usual with JAWS find.

The mouse will actually be placed on that word, especially if it is a link.

Now to move right slightly, press Alt-Shift-Right arrow, this will move the physical mouse three pixels by default. I believe you can change this default in settings.

Then left click in the same way you did with WE.

All the best
Steve


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Carol Smith via Groups.Io
Sent: 25 October 2017 13:38
To: main@jfw.groups.io
Subject: Re: looking for Jaws keystroke for WE command

Hi Steve,

I was the original poster for this topic. Yes, this would be for a web site.

With Window-Eyes, my brother could go to the site he needed and search for a specific word. He could then use the WE mouse keys and navigate up a certain number of pixels and then move slightly to the right, where he could then click on an upload button that was not seen by Window-Eyes. Here is an example:

The letter "a" in the word "name" is at position 200:200.
The button to upload is at position 205:185.
There is no text or graphic that is available to click on. To click the button, he finds the a in name and then moves his mouse pointer up from
200 to 185 by pressing the move up command three times and then moves to the right by pressing the move right command one time. He is then on the upload button and can use his mouse click key to press the button.

He never got to a place in Window-Eyes where he could set up a placemarker, and he is only just getting started with Jaws. His PC is a
Win10 desktop. How can one move by pixels in Jaws? Thank you.

Carol

On 10/25/2017 6:56 AM, Steve Nutt wrote:
Hi,

Place markers only work on the web, don't they?

The Snowman's Hotspot Clicker script would be better for this.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Shannon
Sent: 19 October 2017 18:22
To: main@jfw.groups.io
Subject: Re: looking for Jaws keystroke for WE command

Carol

I come late to this discussion but...
When your Brother finally gets this particular area found with the mouse can he then use the place marker functions of JAWS to get there all the time?
If I understood the functions of this ability it can be website specific and he can just use the placemarker list to go directly to that point.
I just thought it was worth a suggestion.
Anyone with more experience with the placemarkers should absolutely jump in here and correct my understanding.
Shannon
















Re: looking for Jaws keystroke for WE command

Carol Smith
 

Actually, the site is not important, but the ability to move around is. I don't have the address for the site and it is password-protected, so even if we had the main page, we couldn't access the important portion. I am thinking any page with a button on it might do fine for testing.

Carol

On 10/25/2017 8:47 AM, Nermin via Groups.Io wrote:
Hi Carol,

you can only move by pixels using the JAWS cursor, but I don't remember the keystroke at the moment.
I don't think it would be useful on a web page though.

What's the address of that site?

Regards,
Nermin



Re: windows powershell

Carol Smith
 

Hi again, John,

What I am talking about would be the same as toggling speech for the keyboard. It would not change anything else that happens. For example, I type with words spoken after I press space instead of hearing each character one at a time. It is also possible to turn keyboard speech off, but I like to hear what I am typing. The solution I suggested would allow you to input something without it speaking which key is pressed, but could allow the screen to speak what just showed up. This was something I used to experience, pressing a key and having it spoken as a keyboard press and then having it repeated as an item written to the screen. The key still works as it was meant to, but does not speak twice.

Carol

On 10/25/2017 8:22 AM, John Covici wrote:
Thanks -- but why would that be true in that program and not true in
the command prompt? Also, if I do that, will I be able to use the
arrow keys to edit the line? I will do some experimenting.

On Wed, 25 Oct 2017 08:07:26 -0400,
Carol Smith via Groups.Io wrote:
Hi John,

I don't know if this will help you, but you might try
insert-numrow 2 which toggles speech through none, characters,
words and characters and words. You may be getting echo of both
screen input and keyboard input.

Carol


On 10/25/2017 6:00 AM, John Covici wrote:
Hi. I am trying to use windows powershell which is their better
command processor with Jaws, but it repeats each character twice when
I type it. Is there any setting to fix this problem, or do you know
of a script I can get to do so?

Thanks in advance for any suggestions.


Re: looking for Jaws keystroke for WE command

Steve Nutt
 

Yes it is, it works well. Alt-Shift-Arrow keys.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Nermin via Groups.Io
Sent: 25 October 2017 13:47
To: main@jfw.groups.io
Subject: Re: looking for Jaws keystroke for WE command

Hi Carol,

you can only move by pixels using the JAWS cursor, but I don't remember the keystroke at the moment.
I don't think it would be useful on a web page though.

What's the address of that site?

Regards,
Nermin


Re: looking for Jaws keystroke for WE command

Steve Nutt
 

Hi,

OK, here's a thought.

Find the word you want, as usual with JAWS find.

The mouse will actually be placed on that word, especially if it is a link.

Now to move right slightly, press Alt-Shift-Right arrow, this will move the physical mouse three pixels by default. I believe you can change this default in settings.

Then left click in the same way you did with WE.

All the best
Steve

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Carol Smith via Groups.Io
Sent: 25 October 2017 13:38
To: main@jfw.groups.io
Subject: Re: looking for Jaws keystroke for WE command

Hi Steve,

I was the original poster for this topic. Yes, this would be for a web site.

With Window-Eyes, my brother could go to the site he needed and search for a specific word. He could then use the WE mouse keys and navigate up a certain number of pixels and then move slightly to the right, where he could then click on an upload button that was not seen by Window-Eyes. Here is an example:

The letter "a" in the word "name" is at position 200:200.
The button to upload is at position 205:185.
There is no text or graphic that is available to click on. To click the button, he finds the a in name and then moves his mouse pointer up from
200 to 185 by pressing the move up command three times and then moves to the right by pressing the move right command one time. He is then on the upload button and can use his mouse click key to press the button.

He never got to a place in Window-Eyes where he could set up a placemarker, and he is only just getting started with Jaws. His PC is a
Win10 desktop. How can one move by pixels in Jaws? Thank you.

Carol

On 10/25/2017 6:56 AM, Steve Nutt wrote:
Hi,

Place markers only work on the web, don't they?

The Snowman's Hotspot Clicker script would be better for this.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Shannon
Sent: 19 October 2017 18:22
To: main@jfw.groups.io
Subject: Re: looking for Jaws keystroke for WE command

Carol

I come late to this discussion but...
When your Brother finally gets this particular area found with the mouse can he then use the place marker functions of JAWS to get there all the time?
If I understood the functions of this ability it can be website specific and he can just use the placemarker list to go directly to that point.
I just thought it was worth a suggestion.
Anyone with more experience with the placemarkers should absolutely jump in here and correct my understanding.
Shannon










Re: looking for Jaws keystroke for WE command

Steve Nutt
 

Yes, but still only in browse mode. Not if you want to click somewhere with the mouse.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Jonas Voll
Sent: 25 October 2017 13:04
To: main@jfw.groups.io
Subject: Re: looking for Jaws keystroke for WE command

No, Place markers Work in many places such as PDF, Doc, Html!

Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Steve Nutt
Sent: Wednesday, October 25, 2017 5:56 AM
To: main@jfw.groups.io
Subject: Re: looking for Jaws keystroke for WE command

Hi,

Place markers only work on the web, don't they?

The Snowman's Hotspot Clicker script would be better for this.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Shannon
Sent: 19 October 2017 18:22
To: main@jfw.groups.io
Subject: Re: looking for Jaws keystroke for WE command

Carol

I come late to this discussion but...
When your Brother finally gets this particular area found with the mouse can he then use the place marker functions of JAWS to get there all the time?
If I understood the functions of this ability it can be website specific and he can just use the placemarker list to go directly to that point.
I just thought it was worth a suggestion.
Anyone with more experience with the placemarkers should absolutely jump in here and correct my understanding.
Shannon










SonicWall identified this message as clean.
To manage your junk mail go to https://nospam.envisionus.com and logon with your domain userid and password.
If you consider this email to be spam please forward it to 'spam@nospam.envisionus.com'
NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.


Re: Doug Lee's TeamViewer script won't install to JAWS 18.

Steve Nutt
 

Hi,

No idea, but the options page doesn't work too well. For example, arrowing
or tabbing works, but going between tabbed pages don't work with control tab
or anything like that. They are in a list, but even the arrow keys don't go
between them, so you have to use the JAWS cursor if you want to change any
options.

I just thought the script might simplify stuff like that.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of John
Covici
Sent: 25 October 2017 12:28
To: main@jfw.groups.io
Subject: Re: Doug Lee's TeamViewer script won't install to JAWS 18.

I was able to be controlled by teamviewer without a script -- the id and
password fields were fine. What is the purpose of this script?

On Wed, 25 Oct 2017 06:52:11 -0400,
Steve Nutt wrote:

[1 <text/plain; us-ascii (7bit)>]
[2 <text/html; us-ascii (quoted-printable)>] Hi all,

I realise this is an old script, and I don?t know if Doug is still
supporting it. However, the Teamviewer script won?t install to JAWS 18, as
the subject line says.

Here is the log output:-

Install into JAWS folders 18.0.

Preparing for JAWS script compilation.

18.0:

User folder: C:\Users\steve\AppData\Roaming\Freedom
Scientific\JAWS\18.0\Settings\enu

Shared folder: C:\ProgramData\Freedom
Scientific\JAWS\18.0\Settings\enu

Output folder: C:\Users\steve\AppData\Roaming\Freedom
Scientific\JAWS\18.0\Settings\enu

Installing files.

JAWSUtil command: compile teamviewer.jss teamviewer_jcpdict.jss

Command returned 1.

Output:

SCompile exited with code 1

Error: Couldn't open function file builtin.jsd for reading

End of output.

Restoring this JAWS folder to its original state.

JAWSInstallDirs is .

All installations failed!

Writing log file.

Any thoughts from anyone please?

Even if I do get it installed, would it support Teamviewer 12?

Thanks all.

All the best

Steve

--

Computer Room Services

77 Exeter Close

Stevenage

Hertfordshire

SG1 4PW

Tel: +44(0)1438-742286

Mob: +44(0)7956-334938

Fax: +44(0)1438-759589

Email: steve@comproom.co.uk

Web: http://www.comproom.co.uk

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici
covici@ccs.covici.com


Re: looking for Jaws keystroke for WE command

Nermin
 

Hi Carol,

you can only move by pixels using the JAWS cursor, but I don't remember the keystroke at the moment.
I don't think it would be useful on a web page though.

What's the address of that site?

Regards,
Nermin


Re: looking for Jaws keystroke for WE command

Carol Smith
 

Hi Steve,

I was the original poster for this topic. Yes, this would be for a web site.

With Window-Eyes, my brother could go to the site he needed and search for a specific word. He could then use the WE mouse keys and navigate up a certain number of pixels and then move slightly to the right, where he could then click on an upload button that was not seen by Window-Eyes. Here is an example:

The letter "a" in the word "name" is at position 200:200.
The button to upload is at position 205:185.
There is no text or graphic that is available to click on. To click the button, he finds the a in name and then moves his mouse pointer up from 200 to 185 by pressing the move up command three times and then moves to the right by pressing the move right command one time. He is then on the upload button and can use his mouse click key to press the button.

He never got to a place in Window-Eyes where he could set up a placemarker, and he is only just getting started with Jaws. His PC is a Win10 desktop. How can one move by pixels in Jaws? Thank you.

Carol

On 10/25/2017 6:56 AM, Steve Nutt wrote:
Hi,

Place markers only work on the web, don't they?

The Snowman's Hotspot Clicker script would be better for this.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Shannon
Sent: 19 October 2017 18:22
To: main@jfw.groups.io
Subject: Re: looking for Jaws keystroke for WE command

Carol

I come late to this discussion but...
When your Brother finally gets this particular area found with the mouse can he then use the place marker functions of JAWS to get there all the time?
If I understood the functions of this ability it can be website specific and he can just use the placemarker list to go directly to that point.
I just thought it was worth a suggestion.
Anyone with more experience with the placemarkers should absolutely jump in here and correct my understanding.
Shannon









Re: windows powershell

John Covici
 

Thanks -- but why would that be true in that program and not true in
the command prompt? Also, if I do that, will I be able to use the
arrow keys to edit the line? I will do some experimenting.

On Wed, 25 Oct 2017 08:07:26 -0400,
Carol Smith via Groups.Io wrote:

Hi John,

I don't know if this will help you, but you might try
insert-numrow 2 which toggles speech through none, characters,
words and characters and words. You may be getting echo of both
screen input and keyboard input.

Carol


On 10/25/2017 6:00 AM, John Covici wrote:
Hi. I am trying to use windows powershell which is their better
command processor with Jaws, but it repeats each character twice when
I type it. Is there any setting to fix this problem, or do you know
of a script I can get to do so?

Thanks in advance for any suggestions.


--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici
covici@ccs.covici.com


Re: Microsoft Edge Tutorial

mike mcglashon
 

sorry, I missed the orig post,
where this tutor for ms edge you guys refer too?
 
 

Sent: Tuesday, October 24, 2017 11:50 PM
Subject: Re: Microsoft Edge Tutorial
 

You are so welcome, Ann!

Ask any questions!

David Moore

Sent from Mail for Windows 10

 

From: Ann Byrne
Sent: Tuesday, October 24, 2017 11:16 PM
To: main@jfw.groups.io
Subject: Microsoft Edge Tutorial

 

David,

 

thanks for the Edge tutorial.  It's a terrific help.

 

Ann

 

 

 

 


Re: windows powershell

Carol Smith
 

Hi John,

I don't know if this will help you, but you might try insert-numrow 2 which toggles speech through none, characters, words and characters and words. You may be getting echo of both screen input and keyboard input.

Carol

On 10/25/2017 6:00 AM, John Covici wrote:
Hi. I am trying to use windows powershell which is their better
command processor with Jaws, but it repeats each character twice when
I type it. Is there any setting to fix this problem, or do you know
of a script I can get to do so?

Thanks in advance for any suggestions.


Re: Use dictation to talk instead of type on your PC

Jonas Voll
 

Sandra!
The only PC that I have ever seen are laptops with MICS!


Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sandra Streeter
Sent: Tuesday, October 24, 2017 4:33 PM
To: main@jfw.groups.io
Subject: Re: Use dictation to talk instead of type on your PC

How do you find out if there is a mic on your computer, if you want to experiment with this?





Sandra

One can never consent to creep, when one feels an impulse to soar.
(Helen Keller)
-----Original Message-----
From: Ann Byrne
Sent: Tuesday, October 24, 2017 7:33 AM
To: main@jfw.groups.io
Subject: Re: Use dictation to talk instead of type on your PC

Hi, Bill,

I have seen the list. When I speak the commands, though, with
Windows+h pressed, nothing happens.
At 12:57 AM 10/24/2017, you wrote:
Hi, Ann. There actually is a way to delete words with speech recognition as
I will show below.


Delete the previous sentence

Delete previous sentence

Delete the next sentence

Delete next sentence

Delete the previous paragraph

Delete previous paragraph

Delete the next paragraph

Delete next paragraph

Delete the selected or last dictated text

Delete that


Now I will include a large number of speech recognition commands below.

Common Speech Recognition commands


To do this
Say this

Open Start

Start

Open Cortana

Note

Cortana is only available in certain countries/regions, and some Cortana
features might not be available everywhere. If Cortana isn't available or
is
turned
off, you can still use
search.

Press Windows C

Open Search

Press Windows S

Perform an action in an app

Right-click; Press Windows Z; press ctrl B

Select an item by its name

File; Start; View

Select an item or icon

Click Recycle Bin; Click Computer; Click file name

Double-click an item

Double-click Recycle Bin; Double-click Computer; Double-click file name

Switch to an open app

Switch to Paint; Switch to WordPad; Switch to program name; Switch
application

Scroll in one direction

Scroll up; Scroll down; Scroll left; Scroll right

Insert a new paragraph or new line in a document

New paragraph; New line

Select a word in a document

Select word

Select a word and start to correct it

Correct word

Select and delete specific words

Delete word

Show a list of applicable commands

What can I say?

Update the list of speech commands that are currently available

Refresh speech commands

Turn on listening mode

Start listening

Turn off listening mode

Stop listening

Move the Speech Recognition microphone bar

Move speech recognition

Minimize the microphone bar

Minimize speech recognition

Dictation
To do this
Say this

Insert a new line in the document

New line

Insert a new paragraph in the document

New paragraph

Insert a tab

Tab

Insert the literal word for the next command (for example, you can insert
the word "comma" instead of the punctuation mark)

Literal word

Insert the numeral form of a number

Numeral number

Put the cursor before a specific word

Go to word

Put the cursor after a specific word

Go after word

Don't insert a space before the next word

No space

Go to the start of the sentence that the cursor is in

Go to start of sentence

Go to the start of the paragraph that the cursor is in

Go to start of paragraph

Go to the start of the document

Go to start of document

Go to the end of the sentence that the cursor is in

Go to end of sentence

Go to the end of the paragraph that the cursor is in

Go to end of paragraph

Go to the end of the current document

Go to end of document

Select the word in the current document

Select word

Select the word range in the current document

Select word range; Select word through word

Select all text in the current document

Select all

Select a number of words before the location of the cursor

Select previous 20 words; Select previous 10 words

Select a number of words after the location of the cursor

Select next 20 words; Select next 10 words

Select the last text you dictated

Select that

Clear the selection on the screen

Clear selection

Capitalize the first letter of the word

Caps word

Capitalize all the letters of the word

All caps word

Make all the letters in the word lowercase

No caps word

Change the next number of words to uppercase

Change next 10 words to uppercase

Change the next number of words to lowercase

Change next 10 words to lowercase

Delete the previous sentence

Delete previous sentence

Delete the next sentence

Delete next sentence

Delete the previous paragraph

Delete previous paragraph

Delete the next paragraph

Delete next paragraph

Delete the selected or last dictated text

Delete that

Bill White
Billwhite92701@dslextreme.com


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Monday, October 23, 2017 2:41 PM
To: main@jfw.groups.io
Subject: Re: Use dictation to talk instead of type on your PC

thanks for this. Only problem is, saying 'delete that' doesn't do
anything. There isn't a directive as to how to make Windows
understand that she is receiving a command. Like my kids.

At 03:55 PM 10/23/2017, you wrote:
Use dictation to talk instead of type on your PC


Use dictation to convert spoken words into text anywhere on your PC
with the Windows 10 Fall Creators Update.


To start dictating, select a text field and press the Windows logo
key + H to open the dictation toolbar. Then say whatever's on your mind.



If you're using a tablet or a touchscreen, tap the
microphone button on the touch keyboard to start dictating. Tap it
again to stop dictation.


You can also stop dictating at any time by saying "stop dictation."


Note


Dictation is available in US English only. To use it, your PC needs
to be connected to the internet.


To dictate in other languages, use

Windows Speech Recognition.


Dictation commands


Use dictation commands to tell you PC what to do, like "delete that"
or "select the previous word."


The following table tells you what you can say. If a word or phrase
is in bold, it's an example. Replace it with similar words to get
the result you want.


table with 2 columns and 16 rows

To do this

Say

Clear a selection

Clear selection; unselect that

Delete the most recent dictation result or currently selected text

Delete that; strike that

Delete a unit of text, such as the current word

Delete word

Move the cursor to the first character after a specified word or phrase

Go after that; move after word; go to the end of paragraph; move to
the end of that

Move the cursor to the end of a unit of text

Go after word; move after word; go to the end of that; move to the
end of paragraph

Move the cursor backward by a unit of text

Move back to the previous word; go up to the previous paragraph

Move the cursor to the first character before a specified word or phrase

Go to the start of the word

Move the cursor to the start of a text unit

Go before that; move to the start of that

Move the cursor forward to the next unit of text

Move forward to the next word; go down to the next paragraph

Moves the cursor to the end of a text unit

Move to the end of the word; go to the end of the paragraph

Enter one of the following keys: Tab, Enter, End, Home, Page up,
Page down, Backspace, Delete

Tap Enter; press Backspace

Select a specific word or phrase

Select word

Select the most recent dictation result

Select that

Select a unit of text

Select the next three words; select the previous two paragraphs

Turn spelling mode on and off

Start spelling; stop spelling



Dictating letters, numbers, punctuation, and symbols


You can dictate most numbers and punctuation by saying the number or
punctuation character. To dictate letters and symbols, say "start
spelling." Then

say the symbol or letter, or use the ICAO phonetic alphabet.


To dictate an uppercase letter, say "uppercase" before the letter.
For example, "uppercase A" or "uppercase alpha." When you're done,
say "stop spelling."


Here are the punctuation characters and symbols you can dictate.


table with 2 columns and 32 rows

To insert this

Say


@


at symbol; at sign


#


Pound symbol; pound sign; number symbol; number sign; hash symbol;
hash sign; hashtag symbol; hashtag sign; sharp symbol; sharp sign


$


Dollar symbol; dollar sign; dollars symbol; dollars sign


%


Percent symbol; percent sign


^


Caret


&


And symbol; and sign; ampersand symbol; ampersand sign


*


Asterisk; times; star


(


Open paren; left paren; open parenthesis; left paren


)


Close paren; right paren; close parenthesis; right parenthesis


_


Underscore


-


Hyphen; dash; minus sign


~


Tilde


\


Backslash; whack


/


Forward slash; divided by


,


Comma


.


Period; dot; decimal; point


;


Semicolon


'


Apostrophe; open single quote; begin single quote; close single
quote; close single quote; end single quote


=


Equal symbol; equal sign; equals symbol; equal sign


(space)


Space


|


Pipe


:


Colon


?


Question mark; question symbol


[


Open bracket; open square bracket; left bracket; left square bracket


]


Close bracket; close square bracket; right bracket; right square bracket


{


Open curly brace; open curly bracket; left curly brace; left curly
bracket


}


Close curly brace; close curly bracket; right curly brace; right
curly bracket


+


Plus symbol; plus sign


<


Open angle bracket; open less than; left angle bracket; left less than



Close angle bracket; close greater than; right angle bracket; right
greater than


"


Open quotes; begin quotes; close quotes; end quotes; open double
quotes; begin double quotes; close double quotes; end double quotes

table end


<https://support.microsoft.com/en-us/help/4042244/windows-10-use-dictation>
https://support.microsoft.com/en-us/help/4042244/windows-10-use-dictation

















SonicWall identified this message as clean.
To manage your junk mail go to https://nospam.envisionus.com
and
logon with your domain userid and password.
If you consider this email to be spam please forward it to
'spam@nospam.envisionus.com'
NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.


Re: looking for Jaws keystroke for WE command

Jonas Voll
 

No, Place markers Work in many places such as PDF, Doc, Html!

Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Steve Nutt
Sent: Wednesday, October 25, 2017 5:56 AM
To: main@jfw.groups.io
Subject: Re: looking for Jaws keystroke for WE command

Hi,

Place markers only work on the web, don't they?

The Snowman's Hotspot Clicker script would be better for this.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Shannon
Sent: 19 October 2017 18:22
To: main@jfw.groups.io
Subject: Re: looking for Jaws keystroke for WE command

Carol

I come late to this discussion but...
When your Brother finally gets this particular area found with the mouse can he then use the place marker functions of JAWS to get there all the time?
If I understood the functions of this ability it can be website specific and he can just use the placemarker list to go directly to that point.
I just thought it was worth a suggestion.
Anyone with more experience with the placemarkers should absolutely jump in here and correct my understanding.
Shannon










SonicWall identified this message as clean.
To manage your junk mail go to https://nospam.envisionus.com and logon with your domain userid and password.
If you consider this email to be spam please forward it to 'spam@nospam.envisionus.com'
NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.


Re: e-mail address question

david
 

hello;
if you want to read an email address from your inbox using windows live
mail,
you will have to do this through the contacts.

1, ctrl+3=contacts,

now you can either do a search, or you can simply down arrow until you hear
the address you wish to read,

once you find the contact which you wish to read,
press the applications key enter on edit contact,
now you're in the summary page,
now use the keystroke, alt+t,
now you can use the tab key to move through the various edit fields, when
you find the email address, you can use the arrow keys, right and left to
read the email address.
when finished? press escape.
now, ctrl+1 to get back into the inbox.

hope this helps.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of David
Pearson
Sent: Wednesday, October 25, 2017 12:36 AM
To: main@jfw.groups.io
Subject: e-mail address question

Hello all:

Is there a method to "read" an e-mail address from onelocated in my in-box,
and if yes, how is this done?

Sincerely yours,



David Pearson


Re: Doug Lee's TeamViewer script won't install to JAWS 18.

John Covici
 

I was able to be controlled by teamviewer without a script -- the id
and password fields were fine. What is the purpose of this script?

On Wed, 25 Oct 2017 06:52:11 -0400,
Steve Nutt wrote:

[1 <text/plain; us-ascii (7bit)>]
[2 <text/html; us-ascii (quoted-printable)>]
Hi all,

I realise this is an old script, and I don’t know if Doug is still supporting it. However, the Teamviewer script won’t install to JAWS 18, as the subject line says.

Here is the log output:-

Install into JAWS folders 18.0.

Preparing for JAWS script compilation.

18.0:

User folder: C:\Users\steve\AppData\Roaming\Freedom Scientific\JAWS\18.0\Settings\enu

Shared folder: C:\ProgramData\Freedom Scientific\JAWS\18.0\Settings\enu

Output folder: C:\Users\steve\AppData\Roaming\Freedom Scientific\JAWS\18.0\Settings\enu

Installing files.

JAWSUtil command: compile teamviewer.jss teamviewer_jcpdict.jss

Command returned 1.

Output:

SCompile exited with code 1

Error: Couldn't open function file builtin.jsd for reading

End of output.

Restoring this JAWS folder to its original state.

JAWSInstallDirs is .

All installations failed!

Writing log file.

Any thoughts from anyone please?

Even if I do get it installed, would it support Teamviewer 12?

Thanks all.

All the best

Steve

--

Computer Room Services

77 Exeter Close

Stevenage

Hertfordshire

SG1 4PW

Tel: +44(0)1438-742286

Mob: +44(0)7956-334938

Fax: +44(0)1438-759589

Email: steve@comproom.co.uk

Web: http://www.comproom.co.uk

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici
covici@ccs.covici.com


Re: Jaws Sound Cutting Out

Steve Nutt
 

Hi,

Sounds like a power management thing.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Alan Robbins
Sent: 23 October 2017 15:11
To: main@jfw.groups.io
Subject: Re: Jaws Sound Cutting Out

Hello,
That is the correct box so that is not the problem. At this point, I would suggest you contact technical support by mail or phone to help resolve.

On Oct 23, 2017, at 9:22 AM, Laura Wolk <laura.wolk@gmail.com> wrote:

I found nothing called "audio ducking." I found a setting called
"lower the volume of other programs while Jaws is speaking," which I
take to be the same thing. The box is unchecked, but the problem
persists. Any other ideas?

Laura

On 10/23/17, Melissa Stott <mstott69@verizon.net> wrote:
I didn’t think that audio ducking has been working for a while. I
remembered that they had disabled that in previous updates, but I
don’t think that they had fixed it.

Melissa

From: Laura Wolk
Sent: Monday, October 23, 2017 7:59 AM
To: main@jfw.groups.io
Subject: Re: Jaws Sound Cutting Out

Thanks, Randy. I found and disabled the sound effects checkbox in my
sound card properties, but I can't find anything in the jaws setup
wizard about audio ducking. The problem is still occurring. I will
definitely be calling FS back, but if you can give me specific
direction for where to find the checkbox in the meantime, i'd
appreciate it.

Laura

On 10/20/17, Randy Barnett <randy@soundtique.net> wrote:
Hi, make sure audio ducking is turned off.
insert + J then help then startup wizard. Go through the wizard and
look for audio ducking make sure it is unchecked.
Second go to sound.
Windows key type sound. you may have to arrow down to get just "sound".
then press enter.
Highlight the default audio device. It says default after it.
tab to Properties press enter.
Ctrl + tab to effects or enhancement.
tab to disable all effects or enhancements.
Make sure it is checked. then tab to OK. press enter.

FS shold have gone through tis with you. You may consider calling
back and talking to a manager and explaining the sutuation and the
fixes suggested here and ask why you were told they had no suggestions....

On 10/20/2017 2:22 PM, Laura Wolk wrote:
Hello,

I recently reinstalled Jaws 18 on a win10 machine, and the sound
keeps intermittently cutting in and out. For instance, if I scroll
line by line, the first word or so of the lines will sometimes be inaudible.
This does not seem to happen when I'm playing other sounds, such as
streaming music. I have checked my soundcard drivers using windows
update, and it tells me they are up to date. I called Freedom
Scientific, and was (shockingly) told that they had no suggestions.
I also think the problem is most acute when headphones are plugged
in, but I'm not certain about that.

Any help would be appreciated.

Laura

On 10/20/17, Sieghard Weitzel <sieghard@live.ca> wrote:
Another shortcut is
Control+Numpad+, that is basically Control+PC Cursor. It will
Control+Numpad+bring up
the
insert menu, then Alt+r will insert an entire row, Alt+C an entire
column and you don’t even have to press the numlock for this to
work.

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Van Lant, Robin via Groups.Io
Sent: Friday, October 20, 2017 11:10 AM
To: main@jfw.groups.io
Subject: Re: how to insert row in excel

Even easier, Excel remembers the old menu commands in many cases.
So, Insert I, then r for row or c for column works, too.




From: main@jfw.groups.io<mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Kevin Hourigan
Sent: Friday, October 20, 2017 11:33 AM
To: main@jfw.groups.io<mailto:main@jfw.groups.io>
Subject: Re: how to insert row in excel

Alt H, I, R

From: main@jfw.groups.io<mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Mark Furness
Sent: October 20, 2017 10:25 AM
To: main@jfw.groups.io<mailto:main@jfw.groups.io>
Subject: how to insert row in excel

I created a sheet in excel 2007
And need to place an additional row But can not find how to do
that.
Alt I does not give me the option.
Nor clicking insert after hitting alt gives me the option.
What am I missing?
Running windows 10, 17.o9 jaws 2018 beta 3 All help is appreciated
Mercy without repentance is license



This communication may contain privileged and/or confidential
information.
It is intended solely for the use of the addressee. If you are not
the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this
information. If you received this communication in error, please
contact the sender immediately and destroy the material in its
entirety, whether electronic or hard copy. This communication may
contain nonpublic personal information about consumers subject to
the restrictions of the Gramm-Leach-Bliley Act. You may not
directly or indirectly reuse or redisclose such information for
any purpose other than to provide the services for which you are
receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or
services from Key send an e-mail to mailto:DNERequests@key.com
with 'No Promotional E-mails'
in the SUBJECT line.









Re: Jaws Sound Cutting Out

Steve Nutt
 

Hi,

To turn off audio ducking, press Insert-Space then D.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Laura Wolk
Sent: 23 October 2017 13:00
To: main@jfw.groups.io
Subject: Re: Jaws Sound Cutting Out

Thanks, Randy. I found and disabled the sound effects checkbox in my sound card properties, but I can't find anything in the jaws setup wizard about audio ducking. The problem is still occurring. I will definitely be calling FS back, but if you can give me specific direction for where to find the checkbox in the meantime, i'd appreciate it.

Laura

On 10/20/17, Randy Barnett <randy@soundtique.net> wrote:
Hi, make sure audio ducking is turned off.
insert + J then help then startup wizard. Go through the wizard and
look for audio ducking make sure it is unchecked.
Second go to sound.
Windows key type sound. you may have to arrow down to get just "sound".
then press enter.
Highlight the default audio device. It says default after it.
tab to Properties press enter.
Ctrl + tab to effects or enhancement.
tab to disable all effects or enhancements.
Make sure it is checked. then tab to OK. press enter.

FS shold have gone through tis with you. You may consider calling back
and talking to a manager and explaining the sutuation and the fixes
suggested here and ask why you were told they had no suggestions....

On 10/20/2017 2:22 PM, Laura Wolk wrote:
Hello,

I recently reinstalled Jaws 18 on a win10 machine, and the sound
keeps intermittently cutting in and out. For instance, if I scroll
line by line, the first word or so of the lines will sometimes be inaudible.
This does not seem to happen when I'm playing other sounds, such as
streaming music. I have checked my soundcard drivers using windows
update, and it tells me they are up to date. I called Freedom
Scientific, and was (shockingly) told that they had no suggestions. I
also think the problem is most acute when headphones are plugged in,
but I'm not certain about that.

Any help would be appreciated.

Laura

On 10/20/17, Sieghard Weitzel <sieghard@live.ca> wrote:
Another shortcut is
Control+Numpad+, that is basically Control+PC Cursor. It will bring
Control+Numpad+up
the
insert menu, then Alt+r will insert an entire row, Alt+C an entire
column and you don’t even have to press the numlock for this to
work.

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Van Lant, Robin via Groups.Io
Sent: Friday, October 20, 2017 11:10 AM
To: main@jfw.groups.io
Subject: Re: how to insert row in excel

Even easier, Excel remembers the old menu commands in many cases.
So, Insert I, then r for row or c for column works, too.




From: main@jfw.groups.io<mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Kevin Hourigan
Sent: Friday, October 20, 2017 11:33 AM
To: main@jfw.groups.io<mailto:main@jfw.groups.io>
Subject: Re: how to insert row in excel

Alt H, I, R

From: main@jfw.groups.io<mailto:main@jfw.groups.io>
[mailto:main@jfw.groups.io] On Behalf Of Mark Furness
Sent: October 20, 2017 10:25 AM
To: main@jfw.groups.io<mailto:main@jfw.groups.io>
Subject: how to insert row in excel

I created a sheet in excel 2007
And need to place an additional row But can not find how to do
that.
Alt I does not give me the option.
Nor clicking insert after hitting alt gives me the option.
What am I missing?
Running windows 10, 17.o9 jaws 2018 beta 3 All help is appreciated
Mercy without repentance is license



This communication may contain privileged and/or confidential
information.
It is intended solely for the use of the addressee. If you are not
the intended recipient, you are strictly prohibited from disclosing,
copying, distributing or using any of this information. If you
received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether
electronic or hard copy. This communication may contain nonpublic
personal information about consumers subject to the restrictions of
the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse
or redisclose such information for any purpose other than to provide
the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or
services from Key send an e-mail to mailto:DNERequests@key.com with
'No Promotional E-mails'
in the SUBJECT line.