Date   

Re: specifying where to start in goldwave

Richard Turner <richardturner42@...>
 

You may want to check out the use of queue points.
If you use control-e and get the file playing just ahead of where you want the second file to start, get it playing, and at the point you want the second file to start, hit the letter q.
On the tools menu, select cue points, tab to split file and hit enter.
You will be able to specify the folder, file names, etc.
When you get it going, it will create two files based on what you fill in etc.
The help file has gobs of gory detail on this.
HTH,
Richard

On Jul 17, 2017, at 2:22 PM, Mario <mrb620@hotmail.com> wrote:

ok,I'll take a look. thanks.


-------- Original Message --------
From: John Covici [mailto:covici@ccs.covici.com]
Sent: Monday, Jul 17, 2017 3:37 PM EST
To: main@jfw.groups.io
Subject: specifying where to start in goldwave

I have not used the control-w keystroke. If you do a jaws-h and you
have the goldwave scripts installed, there are keystrokes to see
where the markers are.

On Mon, 17 Jul 2017 15:24:57 -0400,
Mario wrote:

after loading the mp3, I press shift+e, tab and specify what time I want
the start marker to move to, type 00:24:00.00. then I tab to the finish
marker which is already 01:06:17.04571. but after returning to the
goldwave window, control+w reports The start marker is set at 0.000
seconds and The finish marker is set at 41 minutes 20.04 seconds.
huh?... might there be a different keystroke to hear what the start and
finish markers are set to instead of pressing control+w, because I think
that specifying the start marker is moved to 24 but is reported as being
set to 0 seconds, and that's why the finish marker is being reported as
set to 41 minutes ....

-------- Original Message --------
From: John Covici [mailto:covici@ccs.covici.com]
Sent: Monday, Jul 17, 2017 2:18 PM EST
To: main@jfw.groups.io
Subject: specifying where to start in goldwave

shift-e allows to specify both markers by time.

On Mon, 17 Jul 2017 12:33:50 -0400,
Mario wrote:

yes, that'll work, but I was hoping of a way to specify where I wanted
to move the start marker to instead of scrubbing to that position.

-------- Original Message --------
From: John Covici [mailto:covici@ccs.covici.com]
Sent: Monday, Jul 17, 2017 12:24 PM EST
To: main@jfw.groups.io
Subject: specifying where to start in goldwave

just hit the left bracket key after positioning the playback cursor
where you want and that will do it.

On Mon, 17 Jul 2017 12:10:07 -0400,
Mario wrote:

using goldwave, I want to seperate a long mp3 tutorial that contains 2
tutorials and have tried the specify command from the view menu, but the
start and finish markers are reported as being set for the same amount
of time when I press control+w after I am returned to the window.
for example, I press control+w and the start and finish markers ar
reported as being set to 24 minutes instead of the finish marker being
set to 51 minutes. and even pressing control+shift+end does not make a
difference; both markers are still reported as being set to 24 minutes.
is there another way to move the start marker to a position other than 0
while leaving the finish marker at the end of the mp3?






















Re: specifying where to start in goldwave

Mario
 

ok,I'll take a look. thanks.

-------- Original Message --------
From: John Covici [mailto:covici@ccs.covici.com]
Sent: Monday, Jul 17, 2017 3:37 PM EST
To: main@jfw.groups.io
Subject: specifying where to start in goldwave

I have not used the control-w keystroke. If you do a jaws-h and you
have the goldwave scripts installed, there are keystrokes to see
where the markers are.

On Mon, 17 Jul 2017 15:24:57 -0400,
Mario wrote:

after loading the mp3, I press shift+e, tab and specify what time I want
the start marker to move to, type 00:24:00.00. then I tab to the finish
marker which is already 01:06:17.04571. but after returning to the
goldwave window, control+w reports The start marker is set at 0.000
seconds and The finish marker is set at 41 minutes 20.04 seconds.
huh?... might there be a different keystroke to hear what the start and
finish markers are set to instead of pressing control+w, because I think
that specifying the start marker is moved to 24 but is reported as being
set to 0 seconds, and that's why the finish marker is being reported as
set to 41 minutes ....

-------- Original Message --------
From: John Covici [mailto:covici@ccs.covici.com]
Sent: Monday, Jul 17, 2017 2:18 PM EST
To: main@jfw.groups.io
Subject: specifying where to start in goldwave

shift-e allows to specify both markers by time.

On Mon, 17 Jul 2017 12:33:50 -0400,
Mario wrote:

yes, that'll work, but I was hoping of a way to specify where I wanted
to move the start marker to instead of scrubbing to that position.

-------- Original Message --------
From: John Covici [mailto:covici@ccs.covici.com]
Sent: Monday, Jul 17, 2017 12:24 PM EST
To: main@jfw.groups.io
Subject: specifying where to start in goldwave

just hit the left bracket key after positioning the playback cursor
where you want and that will do it.

On Mon, 17 Jul 2017 12:10:07 -0400,
Mario wrote:

using goldwave, I want to seperate a long mp3 tutorial that contains 2
tutorials and have tried the specify command from the view menu, but the
start and finish markers are reported as being set for the same amount
of time when I press control+w after I am returned to the window.
for example, I press control+w and the start and finish markers ar
reported as being set to 24 minutes instead of the finish marker being
set to 51 minutes. and even pressing control+shift+end does not make a
difference; both markers are still reported as being set to 24 minutes.
is there another way to move the start marker to a position other than 0
while leaving the finish marker at the end of the mp3?


Re: Problem with JAWS 18 latest version and the applications key?

Randy Barnett <randy@...>
 

Hi, It was just a bad install. This happens once in a while. :)

On 7/17/2017 11:39 AM, Shannon wrote:

Hi all,

I was told that my install of JAWS was not performing as it should.

Last Friday I called for support on uninstalling and reinstalling JAWS.

I was told to go and get the full file of the latest release and download and install it  over the top of what I had and then to choose the repair  from the menu.

After that my computer was just acting odd in the File explorer.

I had a file I needed to rename and here was a different problem.

Today I noticed that the applications key was not working with JAWS or NVDA or WE. The pull down would not read with the keyboard. The mouse commands in all three screen readers had to be used to activate any of the choices. When this was pressed Focus was lost and I had to alt and tab back to get focus back in the explorer window.

I thought to myself what did you do last?

Today I went back to the file I downloaded on Friday, ran it again and this time chose to Uninstall JAWS. After I restarted the machine the Applications key while in the file explorer window was working again.

 

Has anyone ever heard of such a thing? I haven’t reinstalled JAWS yet.

Did anyone here notice anything like this?

 

Thanks

Shannon



Re: MS Containers.

Randy Barnett <randy@...>
 

Right ow my issues are with the container interface. I havent been able to even get an image to load...

On 7/17/2017 7:00 AM, Soronel Haetir wrote:
If containers are like any other virtualization system jaws is not
going to work from the host side. With other virtualization systems
you can install jaws on the client and go from there but I don't know
if that will work with containers.

I do suspect that even if installing jaws in the container works that
you won't really be able to use it from whatever console the container
presents, that you'll need to use RDP.

And note that you should never activate jaws in any sort of virtual
system, much better to pay the $200 for the jaws remote access option.

On 7/16/17, Randy Barnett <randy@soundtique.net> wrote:
Hi, I am trying to use MS containers. Any one here know if it is me or is
Jaws not going to work?




Re: specifying where to start in goldwave

John Covici
 

I have not used the control-w keystroke. If you do a jaws-h and you
have the goldwave scripts installed, there are keystrokes to see
where the markers are.

On Mon, 17 Jul 2017 15:24:57 -0400,
Mario wrote:

after loading the mp3, I press shift+e, tab and specify what time I want
the start marker to move to, type 00:24:00.00. then I tab to the finish
marker which is already 01:06:17.04571. but after returning to the
goldwave window, control+w reports The start marker is set at 0.000
seconds and The finish marker is set at 41 minutes 20.04 seconds.
huh?... might there be a different keystroke to hear what the start and
finish markers are set to instead of pressing control+w, because I think
that specifying the start marker is moved to 24 but is reported as being
set to 0 seconds, and that's why the finish marker is being reported as
set to 41 minutes ....

-------- Original Message --------
From: John Covici [mailto:covici@ccs.covici.com]
Sent: Monday, Jul 17, 2017 2:18 PM EST
To: main@jfw.groups.io
Subject: specifying where to start in goldwave

shift-e allows to specify both markers by time.

On Mon, 17 Jul 2017 12:33:50 -0400,
Mario wrote:

yes, that'll work, but I was hoping of a way to specify where I wanted
to move the start marker to instead of scrubbing to that position.

-------- Original Message --------
From: John Covici [mailto:covici@ccs.covici.com]
Sent: Monday, Jul 17, 2017 12:24 PM EST
To: main@jfw.groups.io
Subject: specifying where to start in goldwave

just hit the left bracket key after positioning the playback cursor
where you want and that will do it.

On Mon, 17 Jul 2017 12:10:07 -0400,
Mario wrote:

using goldwave, I want to seperate a long mp3 tutorial that contains 2
tutorials and have tried the specify command from the view menu, but the
start and finish markers are reported as being set for the same amount
of time when I press control+w after I am returned to the window.
for example, I press control+w and the start and finish markers ar
reported as being set to 24 minutes instead of the finish marker being
set to 51 minutes. and even pressing control+shift+end does not make a
difference; both markers are still reported as being set to 24 minutes.
is there another way to move the start marker to a position other than 0
while leaving the finish marker at the end of the mp3?
















--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici
covici@ccs.covici.com


Re: specifying where to start in goldwave

Mario
 

after loading the mp3, I press shift+e, tab and specify what time I want
the start marker to move to, type 00:24:00.00. then I tab to the finish
marker which is already 01:06:17.04571. but after returning to the
goldwave window, control+w reports The start marker is set at 0.000
seconds and The finish marker is set at 41 minutes 20.04 seconds.
huh?... might there be a different keystroke to hear what the start and
finish markers are set to instead of pressing control+w, because I think
that specifying the start marker is moved to 24 but is reported as being
set to 0 seconds, and that's why the finish marker is being reported as
set to 41 minutes ....

-------- Original Message --------
From: John Covici [mailto:covici@ccs.covici.com]
Sent: Monday, Jul 17, 2017 2:18 PM EST
To: main@jfw.groups.io
Subject: specifying where to start in goldwave

shift-e allows to specify both markers by time.

On Mon, 17 Jul 2017 12:33:50 -0400,
Mario wrote:

yes, that'll work, but I was hoping of a way to specify where I wanted
to move the start marker to instead of scrubbing to that position.

-------- Original Message --------
From: John Covici [mailto:covici@ccs.covici.com]
Sent: Monday, Jul 17, 2017 12:24 PM EST
To: main@jfw.groups.io
Subject: specifying where to start in goldwave

just hit the left bracket key after positioning the playback cursor
where you want and that will do it.

On Mon, 17 Jul 2017 12:10:07 -0400,
Mario wrote:

using goldwave, I want to seperate a long mp3 tutorial that contains 2
tutorials and have tried the specify command from the view menu, but the
start and finish markers are reported as being set for the same amount
of time when I press control+w after I am returned to the window.
for example, I press control+w and the start and finish markers ar
reported as being set to 24 minutes instead of the finish marker being
set to 51 minutes. and even pressing control+shift+end does not make a
difference; both markers are still reported as being set to 24 minutes.
is there another way to move the start marker to a position other than 0
while leaving the finish marker at the end of the mp3?


Problem with JAWS 18 latest version and the applications key?

Shannon
 

Hi all,

I was told that my install of JAWS was not performing as it should.

Last Friday I called for support on uninstalling and reinstalling JAWS.

I was told to go and get the full file of the latest release and download and install it  over the top of what I had and then to choose the repair  from the menu.

After that my computer was just acting odd in the File explorer.

I had a file I needed to rename and here was a different problem.

Today I noticed that the applications key was not working with JAWS or NVDA or WE. The pull down would not read with the keyboard. The mouse commands in all three screen readers had to be used to activate any of the choices. When this was pressed Focus was lost and I had to alt and tab back to get focus back in the explorer window.

I thought to myself what did you do last?

Today I went back to the file I downloaded on Friday, ran it again and this time chose to Uninstall JAWS. After I restarted the machine the Applications key while in the file explorer window was working again.

 

Has anyone ever heard of such a thing? I haven’t reinstalled JAWS yet.

Did anyone here notice anything like this?

 

Thanks

Shannon


Re: specifying where to start in goldwave

John Covici
 

shift-e allows to specify both markers by time.

On Mon, 17 Jul 2017 12:33:50 -0400,
Mario wrote:

yes, that'll work, but I was hoping of a way to specify where I wanted
to move the start marker to instead of scrubbing to that position.

-------- Original Message --------
From: John Covici [mailto:covici@ccs.covici.com]
Sent: Monday, Jul 17, 2017 12:24 PM EST
To: main@jfw.groups.io
Subject: specifying where to start in goldwave

just hit the left bracket key after positioning the playback cursor
where you want and that will do it.

On Mon, 17 Jul 2017 12:10:07 -0400,
Mario wrote:

using goldwave, I want to seperate a long mp3 tutorial that contains 2
tutorials and have tried the specify command from the view menu, but the
start and finish markers are reported as being set for the same amount
of time when I press control+w after I am returned to the window.
for example, I press control+w and the start and finish markers ar
reported as being set to 24 minutes instead of the finish marker being
set to 51 minutes. and even pressing control+shift+end does not make a
difference; both markers are still reported as being set to 24 minutes.
is there another way to move the start marker to a position other than 0
while leaving the finish marker at the end of the mp3?










--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici
covici@ccs.covici.com


Re: specifying where to start in goldwave

Mario
 

yes, that'll work, but I was hoping of a way to specify where I wanted
to move the start marker to instead of scrubbing to that position.

-------- Original Message --------
From: John Covici [mailto:covici@ccs.covici.com]
Sent: Monday, Jul 17, 2017 12:24 PM EST
To: main@jfw.groups.io
Subject: specifying where to start in goldwave

just hit the left bracket key after positioning the playback cursor
where you want and that will do it.

On Mon, 17 Jul 2017 12:10:07 -0400,
Mario wrote:

using goldwave, I want to seperate a long mp3 tutorial that contains 2
tutorials and have tried the specify command from the view menu, but the
start and finish markers are reported as being set for the same amount
of time when I press control+w after I am returned to the window.
for example, I press control+w and the start and finish markers ar
reported as being set to 24 minutes instead of the finish marker being
set to 51 minutes. and even pressing control+shift+end does not make a
difference; both markers are still reported as being set to 24 minutes.
is there another way to move the start marker to a position other than 0
while leaving the finish marker at the end of the mp3?


Re: Old JAWS Demos

Lisle, Ted (CHFS DMS)
 

No, probably not. Lord, I think I have one of those around somewhere. I even wore out one, or, at least, it reached the point where it wouldn't work. I remember transferring spare keys back to the floppy.

ted

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Monday, July 17, 2017 12:28 PM
To: main@jfw.groups.io
Subject: Re: Old JAWS Demos

I think the ILM method was implemented in version 6. before ILM, you
needed to authorize with a 3.5 floppy disk which used quella
authorization. I doubt you can get quella floppies anymore.



-------- Original Message --------
From: Lisle, Ted (CHFS DMS) [mailto:ted.lisle@ky.gov]
Sent: Monday, Jul 17, 2017 12:13 PM EST
To: main@jfw.groups.io
Subject: Old JAWS Demos

Any old disk would probably work as a demo, unless it's properly authorized.

Ted

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Howard
Traxler
Sent: Saturday, July 15, 2017 4:55 PM
To: main@jfw.groups.io
Subject: Old JAWS Demos

Anyone know where I get get older versions of the JAWS 40-minute demo
disk? Versions like 7, 8, 9, and 10? I have found that the combination
of JAWS 8 with windows xp is the only way I can access firefox with jaws.

Thanks, anybody.

Howard


Re: Old JAWS Demos

Mario
 

I think the ILM method was implemented in version 6. before ILM, you
needed to authorize with a 3.5 floppy disk which used quella
authorization. I doubt you can get quella floppies anymore.

-------- Original Message --------
From: Lisle, Ted (CHFS DMS) [mailto:ted.lisle@ky.gov]
Sent: Monday, Jul 17, 2017 12:13 PM EST
To: main@jfw.groups.io
Subject: Old JAWS Demos

Any old disk would probably work as a demo, unless it's properly authorized.

Ted

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Howard
Traxler
Sent: Saturday, July 15, 2017 4:55 PM
To: main@jfw.groups.io
Subject: Old JAWS Demos

Anyone know where I get get older versions of the JAWS 40-minute demo
disk? Versions like 7, 8, 9, and 10? I have found that the combination
of JAWS 8 with windows xp is the only way I can access firefox with jaws.

Thanks, anybody.

Howard


Re: specifying where to start in goldwave

John Covici
 

just hit the left bracket key after positioning the playback cursor
where you want and that will do it.

On Mon, 17 Jul 2017 12:10:07 -0400,
Mario wrote:

using goldwave, I want to seperate a long mp3 tutorial that contains 2
tutorials and have tried the specify command from the view menu, but the
start and finish markers are reported as being set for the same amount
of time when I press control+w after I am returned to the window.
for example, I press control+w and the start and finish markers ar
reported as being set to 24 minutes instead of the finish marker being
set to 51 minutes. and even pressing control+shift+end does not make a
difference; both markers are still reported as being set to 24 minutes.
is there another way to move the start marker to a position other than 0
while leaving the finish marker at the end of the mp3?




--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici
covici@ccs.covici.com


Re: Old JAWS Demos

Lisle, Ted (CHFS DMS)
 

Any old disk would probably work as a demo, unless it’s properly authorized.

 

Ted

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Howard Traxler
Sent: Saturday, July 15, 2017 4:55 PM
To: main@jfw.groups.io
Subject: Old JAWS Demos

 

Anyone know where I get get older versions of the JAWS 40-minute demo disk?  Versions like 7, 8, 9, and 10?  I have found that the combination of JAWS 8 with windows xp is the only way I can access firefox with jaws. 

 

Thanks, anybody.

 

Howard


specifying where to start in goldwave

Mario
 

using goldwave, I want to seperate a long mp3 tutorial that contains 2
tutorials and have tried the specify command from the view menu, but the
start and finish markers are reported as being set for the same amount
of time when I press control+w after I am returned to the window.
for example, I press control+w and the start and finish markers ar
reported as being set to 24 minutes instead of the finish marker being
set to 51 minutes. and even pressing control+shift+end does not make a
difference; both markers are still reported as being set to 24 minutes.
is there another way to move the start marker to a position other than 0
while leaving the finish marker at the end of the mp3?


Re: MS Containers.

Soronel Haetir
 

If containers are like any other virtualization system jaws is not
going to work from the host side. With other virtualization systems
you can install jaws on the client and go from there but I don't know
if that will work with containers.

I do suspect that even if installing jaws in the container works that
you won't really be able to use it from whatever console the container
presents, that you'll need to use RDP.

And note that you should never activate jaws in any sort of virtual
system, much better to pay the $200 for the jaws remote access option.

On 7/16/17, Randy Barnett <randy@soundtique.net> wrote:
Hi, I am trying to use MS containers. Any one here know if it is me or is
Jaws not going to work?



--
Soronel Haetir
soronel.haetir@gmail.com


MS Containers.

Randy Barnett <randy@...>
 

Hi, I am trying to use MS containers. Any one here know if it is me or is Jaws not going to work?


Re: Taking a Screenshot of a Print Page using JAWS

Jeff Christiansen
 

 

Just press the windowsKey, then type paint, and then press

enter

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Rick Miller
Sent: Sunday, July 16, 2017 7:32 PM
To: main@jfw.groups.io
Subject: Re: Taking a Screenshot of a Print Page using JAWS

 

There must be something different in Windows 10.  On the Start menu I cannot find anything that says All Programs.  And when I open Programs there are no Accessories.

 

 

 

Rick Miller

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mike B.
Sent: Saturday, July 15, 2017 8:57 PM
To: main@jfw.groups.io
Subject: Re: Taking a Screenshot of a Print Page using JAWS

 

Hi Rick,

 

Open All Programs from the start menu, open accessories, & arrow down to, Paint.

Take care.  Mike.  Go Dodgers!
Sent from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----

Sent: Saturday, July 15, 2017 8:07 PM

Subject: Re: Taking a Screenshot of a Print Page using JAWS

 

How do you go into paint program?  That’s the part of it I don’t understand.

 

 

 

Rick Miller

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of John Martyn
Sent: Saturday, July 15, 2017 6:26 AM
To: main@jfw.groups.io
Subject: Re: Taking a Screenshot of a Print Page using JAWS

 

When you hit the print screen button on your computer it automatically copies it to the clipboard and what you do is you go into paint program, then you hit control V to paste it in there and save it as a document and send that back to the technician, hope this helps. John Martin MARTYN

On Fri, Jul 14, 2017 at 11:40 PM Mike B. <mb69mach1@...> wrote:

Hi Rick,

 

The Paste Special keystroke for Word is, Control, Alt, + V.

Take care.  Mike.  Go Dodgers!
Sent from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----

Sent: Friday, July 14, 2017 9:11 PM

Subject: Re: Taking a Screenshot of a Print Page using JAWS

 

What do you mean by paste special?  Isn’t the keystroke just the Control+V keystroke?

 

 

 

Rick Miller

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Randy Barnett
Sent: Friday, July 14, 2017 8:38 PM
To: main@jfw.groups.io
Subject: Re: Taking a Screenshot of a Print Page using JAWS

 

If you hit print screen then open word then paste special it will ask you if you want to paste as a device independant bitmap. This tells you it is there. You wont have any other feedback since it is an image.
On 7/14/2017 8:26 PM, Rick Miller wrote:

Dear Listers:

 

I am having trouble with a printed page, and a technician is asking me to send s screenshot to him.  He told me to print the page using the Print Screen page and then paste it into a document.  I tried that, but it didn’t work.  Have any of you ever taken a screenshot using JAWS?  If so, how did you go about it?

 

 

 

Rick Miller

 

 


Re: Taking a Screenshot of a Print Page using JAWS

Rick Miller
 

There must be something different in Windows 10.  On the Start menu I cannot find anything that says All Programs.  And when I open Programs there are no Accessories.

 

 

 

Rick Miller

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mike B.
Sent: Saturday, July 15, 2017 8:57 PM
To: main@jfw.groups.io
Subject: Re: Taking a Screenshot of a Print Page using JAWS

 

Hi Rick,

 

Open All Programs from the start menu, open accessories, & arrow down to, Paint.

Take care.  Mike.  Go Dodgers!
Sent from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----

From: Rick Miller

Sent: Saturday, July 15, 2017 8:07 PM

Subject: Re: Taking a Screenshot of a Print Page using JAWS

 

How do you go into paint program?  That’s the part of it I don’t understand.

 

 

 

Rick Miller

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of John Martyn
Sent: Saturday, July 15, 2017 6:26 AM
To: main@jfw.groups.io
Subject: Re: Taking a Screenshot of a Print Page using JAWS

 

When you hit the print screen button on your computer it automatically copies it to the clipboard and what you do is you go into paint program, then you hit control V to paste it in there and save it as a document and send that back to the technician, hope this helps. John Martin MARTYN

On Fri, Jul 14, 2017 at 11:40 PM Mike B. <mb69mach1@...> wrote:

Hi Rick,

 

The Paste Special keystroke for Word is, Control, Alt, + V.

Take care.  Mike.  Go Dodgers!
Sent from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----

From: Rick Miller

Sent: Friday, July 14, 2017 9:11 PM

Subject: Re: Taking a Screenshot of a Print Page using JAWS

 

What do you mean by paste special?  Isn’t the keystroke just the Control+V keystroke?

 

 

 

Rick Miller

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Randy Barnett
Sent: Friday, July 14, 2017 8:38 PM
To: main@jfw.groups.io
Subject: Re: Taking a Screenshot of a Print Page using JAWS

 

If you hit print screen then open word then paste special it will ask you if you want to paste as a device independant bitmap. This tells you it is there. You wont have any other feedback since it is an image.
On 7/14/2017 8:26 PM, Rick Miller wrote:

Dear Listers:

 

I am having trouble with a printed page, and a technician is asking me to send s screenshot to him.  He told me to print the page using the Print Screen page and then paste it into a document.  I tried that, but it didn’t work.  Have any of you ever taken a screenshot using JAWS?  If so, how did you go about it?

 

 

 

Rick Miller

 

 


Re: My problem with latest update

Jason White
 

Did you try running a JAWS repair (on version 18)? This procedure fixed JAWS crashes I was encountering earlier this year. I’m still experiencing crashes, but they seem to be related to very specific situations.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Don Moore
Sent: Saturday, July 15, 2017 6:46 PM
To: main@jfw.groups.io
Subject: My problem with latest update

 

Hi List,

 

                Actually, I have been having this same problem with the last 4 updates. When I am using JAWS 18 on my Windows 10 machine, it will work fine for a while; however, JAWS suddenly crashes without notice. It always happens when I am using Microsoft software, including Outlook 2013, Word 2013 and Internet Explorer 11.

 

                The problem first occurred in the early versions of JAWS 18, then it was fixed in a few builds, then it started occurring again around January or February. The latest update worked fine for about 2 hours, so I thought they had it fixed again, but then it crashed.

 

                When JAWS 18 crashes, I cannot seem to generate an error report and other screen readers won’t work properly either, so I have to turn off my PC and turn it on again with the on/off button.

 

                JAWS 17 works fine all the time, so I am unloading JAWS 18 and launching JAWS 17 until I can get this fix.

 

                Any help will be appreciated.

 

                Thanks in advance,

 

                Don


My problem with latest update

Don Moore <donmoore@...>
 

Hi List,

 

                Actually, I have been having this same problem with the last 4 updates. When I am using JAWS 18 on my Windows 10 machine, it will work fine for a while; however, JAWS suddenly crashes without notice. It always happens when I am using Microsoft software, including Outlook 2013, Word 2013 and Internet Explorer 11.

 

                The problem first occurred in the early versions of JAWS 18, then it was fixed in a few builds, then it started occurring again around January or February. The latest update worked fine for about 2 hours, so I thought they had it fixed again, but then it crashed.

 

                When JAWS 18 crashes, I cannot seem to generate an error report and other screen readers won’t work properly either, so I have to turn off my PC and turn it on again with the on/off button.

 

                JAWS 17 works fine all the time, so I am unloading JAWS 18 and launching JAWS 17 until I can get this fix.

 

                Any help will be appreciated.

 

                Thanks in advance,

 

                Don