Date   

Re: I am selling my Jaws 18

David & his pack of dogs <myguidedogis@...>
 

The male part of my brain is kicking in here.  If you used NVDA for the last 2 years, why would you get JAWS 18?  $275, is cheap unless you paid nothing. Personally, I have used JAWS for the same period of time as you have and am quite happy with the help Sieghard and others have given me.  But, to each his own, I suppose.   

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of bob jutzi
Sent: June 21, 2017 12:04 PM
To: main@jfw.groups.io
Subject: I am selling my Jaws 18

 

The subject says it all.

After using Jaws since mid. May, I decided to part with my Jaws 18 and stick with NVDA which has been my steady screen reader for the past two years.  Along with my preferring the UI of NVDA and the fact that it supports everything I use extremely well, both my wife and I are unemployed so I can't warrant spending money on screen access for the foreseeable future.

 

$275 and I will cover the $75 transfer fee.  I do take Paypal, jutzi@....

I will Email serial and authorization numbers upon transfer of license.

 


Re: Saving new file using latest JFW in word and excel 16

Shai
 

Hi,
Press the f12 key at the top of your keyboard. This will bring up the
save as dialog in both Excel and Word. You could also press control s
or alt f and arrow down to the save as tab.

On 6/21/17, Jodie Hoger <jodiehoger@...> wrote:
Hi List,
For the life of me I cannot work out how to save a new file in Word or Excel
16 using latest JFW on a Win 10 laptop.
Would love some help please. I used to press alt+F A to bring up the save as
dialogue box but that simply isn't working.
Look forward to your guidance,
Best wishes,
Jo


Sent from my iPhone



Saving new file using latest JFW in word and excel 16

Jodie Hoger
 

Hi List,
For the life of me I cannot work out how to save a new file in Word or Excel 16 using latest JFW on a Win 10 laptop.
Would love some help please. I used to press alt+F A to bring up the save as dialogue box but that simply isn't working.
Look forward to your guidance,
Best wishes,
Jo


Sent from my iPhone


Re: Opening Outlook attachments

Sieghard Weitzel <sieghard@...>
 

You can also try Jaws Key+A when you are in an open message, it usually put focus on the attachments list.

You can then use right arrow or left arrow to move around, Jaws says “Press Alt+Down arrow for more options” and either that or Shift+F10 will open the menu where you have things like “Open”, “Save As”, “Save All Attachments”, “Remove Attachment” etc.

 

Regards,

Sieghard

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Wednesday, June 21, 2017 6:00 PM
To: main@jfw.groups.io
Subject: Re: Opening Outlook attachments

 

Danney:

 

I’m  using Outlook 2016, but you should be able to access all attachments by first doing a shift-tab, and then, once in the attachments list, use your right and left arrow keys to get the names of those attachments.

 

At least,  this has always worked for me.

 

Am using  Jaws 18 here.

 

Tom Behler

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Yates, Danney
Sent: Wednesday, June 21, 2017 4:58 PM
To: main@jfw.groups.io
Subject: Opening Outlook attachments

 

Using JAWS 18 and Outlook 2013.  When I tab over to see attachments, can rarely gat JAWS to read me the titles, might read the first one or two, but not those remaining.  How can I get a display of the attachments?

Thanks forany help,

Danney

 

 

Roosevelt Warm Springs

Danney Yates, M.Ed, CRC

Director of Residential and Campus Life

Residential and Campus Life

Office: (706) 655-5129  Fax: (706) 655-5118  Georgia Relay: 711

6135 Roosevelt Highway│P.O. Box 1000 │Warm Springs, GA 31830

www.gvs.ga.gov                                       

 

 

*Emails may now be sent to: Danney.Yates@...*

 


Re: I am selling my Jaws 18

bob jutzi <jutzi1@...>
 

On 6/21/2017 6:06 PM, John Farley wrote:
Hi Bob,
I am in the UK and have a JAWS licence and so will not be buying your licence, sorry about that. However, could you please answer the following?
What applications do you use NVDA for which are also covered by JAWS?
Word 2013 along with Omnipage Ultimate for scanning as well as Outlook, Winamp, Firefox, iTunes, Acrobat Reader, to name some.>
More to the point, what could JAWS do for you that NVDA cannt?
Really nothing. I am unemployed, so don't have a job requiring any specialized software where a Jaws script may be needed for more accessibility. Plus NVDA is extremely snappy. For starters, the installer is only about a 19mb file, installation doesn't even take a minute since it doesn't require a system reboot, and most, if not all, settings can be changed on the fly.
Example, voice settings can either be changed by Ins-N, P, V (NVDA menu, Preferences, Voice settings) or Control-Ins-V from anywhere .


Regards, John
Tel: +44 (0) 1442 259243
Mob: +44 (0) 7815 056076
*From:*main@jfw.groups.io [mailto:main@jfw.groups.io] *On Behalf Of *bob jutzi
*Sent:* Wednesday, June 21, 2017 8:04 PM
*To:* main@jfw.groups.io
*Subject:* I am selling my Jaws 18
The subject says it all.
After using Jaws since mid. May, I decided to part with my Jaws 18 and stick with NVDA which has been my steady screen reader for the past two years. Along with my preferring the UI of NVDA and the fact that it supports everything I use extremely well, both my wife and I are unemployed so I can't warrant spending money on screen access for the foreseeable future.
$275 and I will cover the $75 transfer fee. I do take Paypal, jutzi@... <mailto:jutzi@...>.
I will Email serial and authorization numbers upon transfer of license.


Re: Opening Outlook attachments

Tom Behler
 

Danney:

 

I’m  using Outlook 2016, but you should be able to access all attachments by first doing a shift-tab, and then, once in the attachments list, use your right and left arrow keys to get the names of those attachments.

 

At least,  this has always worked for me.

 

Am using  Jaws 18 here.

 

Tom Behler

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Yates, Danney
Sent: Wednesday, June 21, 2017 4:58 PM
To: main@jfw.groups.io
Subject: Opening Outlook attachments

 

Using JAWS 18 and Outlook 2013.  When I tab over to see attachments, can rarely gat JAWS to read me the titles, might read the first one or two, but not those remaining.  How can I get a display of the attachments?

Thanks forany help,

Danney

 

 

Roosevelt Warm Springs

Danney Yates, M.Ed, CRC

Director of Residential and Campus Life

Residential and Campus Life

Office: (706) 655-5129  Fax: (706) 655-5118  Georgia Relay: 711

6135 Roosevelt Highway│P.O. Box 1000 │Warm Springs, GA 31830

www.gvs.ga.gov                                       

 

 

*Emails may now be sent to: Danney.Yates@...*

 


Re: Opening Outlook attachments

Carolyn Arnold <4carolyna@...>
 

I use 3012, and keep hittint the Right Arrow Key.

Best from,

Carolyn

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Jason White via Groups.Io
Sent: Wednesday, June 21, 2017 8:16 PM
To: main@jfw.groups.io
Subject: Re: Opening Outlook attachments

Left/right arrow keys move focus from one attachment to another. I'm using MS-Outlook 2016, however, so it might be different - I can't remember what was different in Outlook 2013.

Yates, Danney <danney.yates@...> wrote:
Using JAWS 18 and Outlook 2013. When I tab over to see attachments, can rarely gat JAWS to read me the titles, might read the first one or two, but not those remaining. How can I get a display of the attachments?
Thanks forany help,
Danney

[cid:image001.png@...]


Roosevelt Warm Springs
Danney Yates, M.Ed, CRC
Director of Residential and Campus Life Residential and Campus Life
Office: (706) 655-5129 Fax: (706) 655-5118 Georgia Relay: 711
6135 Roosevelt Highway│P.O. Box 1000 │Warm Springs, GA 31830
www.gvs.ga.gov [Facebook
Sig.png]<https://www.facebook.com/GAVocRehab/> [Twitter Sig.png]
<https://twitter.com/GAVocRehab/status/809052550091640833>


*Emails may now be sent to: Danney.Yates@...*


Re: Opening Outlook attachments

Jason White
 

Left/right arrow keys move focus from one attachment to another. I'm using
MS-Outlook 2016, however, so it might be different - I can't remember what was
different in Outlook 2013.

Yates, Danney <danney.yates@...> wrote:

Using JAWS 18 and Outlook 2013. When I tab over to see attachments, can rarely gat JAWS to read me the titles, might read the first one or two, but not those remaining. How can I get a display of the attachments?
Thanks forany help,
Danney

[cid:image001.png@...]


Roosevelt Warm Springs
Danney Yates, M.Ed, CRC
Director of Residential and Campus Life
Residential and Campus Life
Office: (706) 655-5129 Fax: (706) 655-5118 Georgia Relay: 711
6135 Roosevelt Highway│P.O. Box 1000 │Warm Springs, GA 31830
www.gvs.ga.gov
[Facebook Sig.png]<https://www.facebook.com/GAVocRehab/> [Twitter Sig.png] <https://twitter.com/GAVocRehab/status/809052550091640833>


*Emails may now be sent to: Danney.Yates@...*


Re: 2016 and advanced find

Richard Turner <richardturner42@...>
 

I see what you mean.
That isn't working at all like it should.
I'll have to try that at work where we have Windows 7 and Office 2013.

Thanks,
Richard

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of brian albriton
Sent: Wednesday, June 21, 2017 5:02 PM
To: main@jfw.groups.io
Subject: Re: 2016 and advanced find

Hi, Richard.
I use control-shift-f to bring up the advanced find.
I'm still playing with f3 and will try control-e.
So here's an example.
I'd press control shift-f and the initial choice is a edit combo wher you
can type in a string you might find in the subject.
So I would type in sticky keys
Press enter and after a few secondsthe program would stop searching.
At that point I would press f6 to get quickly to the results.
I would then select all the messages either delete or perhaps move them
somewhere.
All the best, Brian

Brian


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard
Turner
Sent: Wednesday, June 21, 2017 4:49 PM
To: main@jfw.groups.io
Subject: Re: 2016 and advanced find

I'm not having issues with the find.
I just tried f3, which I had not used before and it found messages rather
quickly.
I previously used control+e.

It doesn't identify itself as advanced find. Is there more steps to what
you are doing?

Richard


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of david
Sent: Wednesday, June 21, 2017 5:52 AM
To: main@jfw.groups.io
Subject: Re: 2016 and advanced find

Hello there;
I also find the advance search doesn't work, I use the f3 key to search type
in criteria,

Shift+tab a few times to the search results.


       Statistics are like a bikini.  What they reveal is suggestive, but
what they conceal is vital.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of brian
albriton
Sent: Tuesday, June 20, 2017 4:47 PM
To: main@jfw.groups.io
Subject: 2016 and advanced find

Since updating to outlook 2016, the advanced find dialog hangs on after I
press the find now button. It hangs on stop and stays there.

It used to simply find what I was looking for, (say something in the subject
line) and I could find the list of messages by pressing the f6 key.

Has anyone else had this issue?







Brian Albriton

iPhone 2136103315

cocanut50@...


Re: 2016 and advanced find

brian albriton
 

Hi, Richard.
I use control-shift-f to bring up the advanced find.
I'm still playing with f3 and will try control-e.
So here's an example.
I'd press control shift-f and the initial choice is a edit combo wher you
can type in a string you might find in the subject.
So I would type in sticky keys
Press enter and after a few secondsthe program would stop searching.
At that point I would press f6 to get quickly to the results.
I would then select all the messages either delete or perhaps move them
somewhere.
All the best, Brian

Brian

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard
Turner
Sent: Wednesday, June 21, 2017 4:49 PM
To: main@jfw.groups.io
Subject: Re: 2016 and advanced find

I'm not having issues with the find.
I just tried f3, which I had not used before and it found messages rather
quickly.
I previously used control+e.

It doesn't identify itself as advanced find. Is there more steps to what
you are doing?

Richard


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of david
Sent: Wednesday, June 21, 2017 5:52 AM
To: main@jfw.groups.io
Subject: Re: 2016 and advanced find

Hello there;
I also find the advance search doesn't work, I use the f3 key to search type
in criteria,

Shift+tab a few times to the search results.


       Statistics are like a bikini.  What they reveal is suggestive, but
what they conceal is vital.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of brian
albriton
Sent: Tuesday, June 20, 2017 4:47 PM
To: main@jfw.groups.io
Subject: 2016 and advanced find

Since updating to outlook 2016, the advanced find dialog hangs on after I
press the find now button. It hangs on stop and stays there.

It used to simply find what I was looking for, (say something in the subject
line) and I could find the list of messages by pressing the f6 key.

Has anyone else had this issue?







Brian Albriton

iPhone 2136103315

cocanut50@...


Re: I am selling my Jaws 18

John Farley <john_farley@...>
 

Hi Bob,

 

I am in the UK and have a JAWS licence and so will not be buying your licence, sorry about that. However, could you please answer the following?

 

What applications do you use NVDA for which are also covered by JAWS?

More to the point, what could JAWS do for you that NVDA cannt?

 

 

 

Regards, John

 

Tel: +44 (0) 1442 259243

Mob: +44 (0) 7815 056076

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of bob jutzi
Sent: Wednesday, June 21, 2017 8:04 PM
To: main@jfw.groups.io
Subject: I am selling my Jaws 18

 

The subject says it all.

After using Jaws since mid. May, I decided to part with my Jaws 18 and stick with NVDA which has been my steady screen reader for the past two years.  Along with my preferring the UI of NVDA and the fact that it supports everything I use extremely well, both my wife and I are unemployed so I can't warrant spending money on screen access for the foreseeable future.

 

$275 and I will cover the $75 transfer fee.  I do take Paypal, jutzi@....

I will Email serial and authorization numbers upon transfer of license.

 


Opening Outlook attachments

Yates, Danney
 

Using JAWS 18 and Outlook 2013.  When I tab over to see attachments, can rarely gat JAWS to read me the titles, might read the first one or two, but not those remaining.  How can I get a display of the attachments?

Thanks forany help,

Danney

 

 

Roosevelt Warm Springs

Danney Yates, M.Ed, CRC

Director of Residential and Campus Life

Residential and Campus Life

Office: (706) 655-5129  Fax: (706) 655-5118  Georgia Relay: 711

6135 Roosevelt Highway│P.O. Box 1000 │Warm Springs, GA 31830

www.gvs.ga.gov                                       

 

 

*Emails may now be sent to: Danney.Yates@...*

 


Re: 2016 and advanced find

Richard Turner <richardturner42@...>
 

I'm not having issues with the find.
I just tried f3, which I had not used before and it found messages rather quickly.
I previously used control+e.

It doesn't identify itself as advanced find. Is there more steps to what you are doing?

Richard

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of david
Sent: Wednesday, June 21, 2017 5:52 AM
To: main@jfw.groups.io
Subject: Re: 2016 and advanced find

Hello there;
I also find the advance search doesn't work, I use the f3 key to search type
in criteria,

Shift+tab a few times to the search results.


       Statistics are like a bikini.  What they reveal is suggestive, but
what they conceal is vital.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of brian
albriton
Sent: Tuesday, June 20, 2017 4:47 PM
To: main@jfw.groups.io
Subject: 2016 and advanced find

Since updating to outlook 2016, the advanced find dialog hangs on after I
press the find now button. It hangs on stop and stays there.

It used to simply find what I was looking for, (say something in the subject
line) and I could find the list of messages by pressing the f6 key.

Has anyone else had this issue?







Brian Albriton

iPhone 2136103315

cocanut50@...


Other available JAWS voices.

Tim Ford
 

Hi All,

Just changing the subject line to be something more descriptive than "Is There a Possibility."!

Tim Ford

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lisle, Ted (CHFS DMS)
Sent: Wednesday, June 21, 2017 11:39 AM
To: main@jfw.groups.io
Subject: Re: Is There a Possibility...

And more tightly integrated than an add-on.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Wednesday, June 21, 2017 2:17 PM
To: main@jfw.groups.io
Subject: Re: Is There a Possibility...

that's because Eloquence is a true synthesized voice.


-------- Original Message --------
From: Lisle, Ted (CHFS DMS) [mailto:ted.lisle@...]
Sent: Wednesday, Jun 21, 2017 11:55 AM EST
To: main@jfw.groups.io
Subject: Is There a Possibility...

To my ear it's still the best. The rhythm or meter on the external voices is much better than it once was, but the unadorned Eloquence can really cover ground with few or no repeats.

Ted

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of p tusing
Sent: Tuesday, June 20, 2017 8:09 PM
To: main@jfw.groups.io
Subject: Re: Is There a Possibility...

Hi,
Since these voices cost $115, are they really clear when speaking numbers and very specific items like many addresses at higher speeds?

Some people say Eloquence does the best at higher speeds in terms of reading accuracy.

Thank you.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Annabelle Susan Morison
Sent: Tuesday, June 20, 2017 2:56 PM
To: main@jfw.groups.io
Subject: Re: Is There a Possibility...

$115? That's a lot a lot of money! That's more than I can spend at the moment!

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of netbat66
Sent: Tuesday, June 20, 2017 10:53 AM
To: main@jfw.groups.io
Subject: Re: Is There a Possibility...

if you have openbook 8, (i don't know about newer versions) then you would be able to use the real speak voices that came with openbook 8.
this was a stand alone package.
another option, but is expensive is the stand alone vocalizer voice package from the i t guys. but it costs $115
http://www.atguys.com/store/index.php?main_page=product_info&cPath=20&products_id=242&zenid=ae9c052727036d11230fabd36b129bb0




-----Original Message-----
From: Annabelle Susan Morison
Sent: Tuesday, June 20, 2017 5:36 AM
To: main@jfw.groups.io
Subject: Is There a Possibility...


Of getting the Realspeak Solo Direct Voices to work by themselves outside of JAWS within the Windows Operating Systems? The reason why I ask this is because I have "Gold Wave", an audio software that comes with a text-to-speech converter, and it seems the only voices I can get to work in there are the SAPI voices I've installed on my machine. I've tried installing the Realspeak voices from the CD that came with JAWS 8.0, but it says these versions will only work on 32-bit operating systems. I want to try putting registry keys for these voices in the Registry Editor, but I'm not sure if this will actually work.
What can I do next?

Virus-free. www.avg.com






---
This email has been checked for viruses by AVG.
http://www.avg.com











.


I am selling my Jaws 18

bob jutzi <jutzi1@...>
 

The subject says it all.

After using Jaws since mid. May, I decided to part with my Jaws 18 and stick with NVDA which has been my steady screen reader for the past two years.  Along with my preferring the UI of NVDA and the fact that it supports everything I use extremely well, both my wife and I are unemployed so I can't warrant spending money on screen access for the foreseeable future.


$275 and I will cover the $75 transfer fee.  I do take Paypal, jutzi@....

I will Email serial and authorization numbers upon transfer of license.




Re: Is There a Possibility...

Lisle, Ted (CHFS DMS)
 

And more tightly integrated than an add-on.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Wednesday, June 21, 2017 2:17 PM
To: main@jfw.groups.io
Subject: Re: Is There a Possibility...

that's because Eloquence is a true synthesized voice.


-------- Original Message --------
From: Lisle, Ted (CHFS DMS) [mailto:ted.lisle@...]
Sent: Wednesday, Jun 21, 2017 11:55 AM EST
To: main@jfw.groups.io
Subject: Is There a Possibility...

To my ear it's still the best. The rhythm or meter on the external
voices is much better than it once was, but the unadorned Eloquence can
really cover ground with few or no repeats.

Ted

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of p tusing
Sent: Tuesday, June 20, 2017 8:09 PM
To: main@jfw.groups.io
Subject: Re: Is There a Possibility...

Hi,
Since these voices cost $115, are they really clear when speaking
numbers and very specific items like many addresses at higher speeds?

Some people say Eloquence does the best at higher speeds in terms of
reading accuracy.

Thank you.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Annabelle Susan Morison
Sent: Tuesday, June 20, 2017 2:56 PM
To: main@jfw.groups.io
Subject: Re: Is There a Possibility...

$115? That's a lot a lot of money! That's more than I can spend at the
moment!

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of netbat66
Sent: Tuesday, June 20, 2017 10:53 AM
To: main@jfw.groups.io
Subject: Re: Is There a Possibility...

if you have openbook 8, (i don't know about newer versions) then you
would be able to use the real speak voices that came with openbook 8.
this was a stand alone package.
another option, but is expensive is the stand alone vocalizer voice
package from the i t guys. but it costs $115
http://www.atguys.com/store/index.php?main_page=product_info&cPath=20&products_id=242&zenid=ae9c052727036d11230fabd36b129bb0




-----Original Message-----
From: Annabelle Susan Morison
Sent: Tuesday, June 20, 2017 5:36 AM
To: main@jfw.groups.io
Subject: Is There a Possibility...


Of getting the Realspeak Solo Direct Voices to work by themselves outside of
JAWS within the Windows Operating Systems? The reason why I ask this is
because
I have "Gold Wave", an audio software that comes with a text-to-speech
converter, and it seems the only voices I can get to work in there are the
SAPI
voices I've installed on my machine. I've tried installing the Realspeak
voices
from the CD that came with JAWS 8.0, but it says these versions will
only work
on 32-bit operating systems. I want to try putting registry keys for these
voices in the Registry Editor, but I'm not sure if this will actually work.
What can I do next?

Virus-free. www.avg.com






---
This email has been checked for viruses by AVG.
http://www.avg.com











.


Re: Is There a Possibility...

Mario
 

that's because Eloquence is a true synthesized voice.

-------- Original Message --------
From: Lisle, Ted (CHFS DMS) [mailto:ted.lisle@...]
Sent: Wednesday, Jun 21, 2017 11:55 AM EST
To: main@jfw.groups.io
Subject: Is There a Possibility...

To my ear it's still the best. The rhythm or meter on the external
voices is much better than it once was, but the unadorned Eloquence can
really cover ground with few or no repeats.

Ted

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of p tusing
Sent: Tuesday, June 20, 2017 8:09 PM
To: main@jfw.groups.io
Subject: Re: Is There a Possibility...

Hi,
Since these voices cost $115, are they really clear when speaking
numbers and very specific items like many addresses at higher speeds?

Some people say Eloquence does the best at higher speeds in terms of
reading accuracy.

Thank you.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Annabelle Susan Morison
Sent: Tuesday, June 20, 2017 2:56 PM
To: main@jfw.groups.io
Subject: Re: Is There a Possibility...

$115? That's a lot a lot of money! That's more than I can spend at the
moment!

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of netbat66
Sent: Tuesday, June 20, 2017 10:53 AM
To: main@jfw.groups.io
Subject: Re: Is There a Possibility...

if you have openbook 8, (i don't know about newer versions) then you
would be able to use the real speak voices that came with openbook 8.
this was a stand alone package.
another option, but is expensive is the stand alone vocalizer voice
package from the i t guys. but it costs $115
http://www.atguys.com/store/index.php?main_page=product_info&cPath=20&products_id=242&zenid=ae9c052727036d11230fabd36b129bb0




-----Original Message-----
From: Annabelle Susan Morison
Sent: Tuesday, June 20, 2017 5:36 AM
To: main@jfw.groups.io
Subject: Is There a Possibility...


Of getting the Realspeak Solo Direct Voices to work by themselves outside of
JAWS within the Windows Operating Systems? The reason why I ask this is
because
I have "Gold Wave", an audio software that comes with a text-to-speech
converter, and it seems the only voices I can get to work in there are the
SAPI
voices I've installed on my machine. I've tried installing the Realspeak
voices
from the CD that came with JAWS 8.0, but it says these versions will
only work
on 32-bit operating systems. I want to try putting registry keys for these
voices in the Registry Editor, but I'm not sure if this will actually work.
What can I do next?

Virus-free. www.avg.com






---
This email has been checked for viruses by AVG.
http://www.avg.com











.


Re: Wireless router password & Jaws

Tim Ford
 

Hi All,

 

One thing to keep in mind after changing the default wireless network key is that if the router/modem ever loses power, or especially if you push the little re-set button, your wireless password may revert to the default shown on the label.  You would need to go in and manually change the wireless key to match what you entered before, or you will need to change the wireless key on all wireless devices.  I know the above from an expensive technician service call.  I was able to avoid the expense only after “proving” to AT&T that the router/modem had locked up on its own, leading to the re-set.  AT&T ended up putting in a new router/modem after they realized my old unit was crashing on its own.

 

Tim Ford

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Laura Richardson
Sent: Wednesday, June 21, 2017 10:27 AM
To: main@jfw.groups.io
Subject: Re: Wireless router password & Jaws

 

It may be later today before I get a chance to do this but I’ll give this a shot and let y’all know how it goes.

 

Thank you very much for your help.

 

Laura

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dale Heltzer
Sent: Wednesday, June 21, 2017 12:18 PM
To: main@jfw.groups.io
Subject: Re: Wireless router password & Jaws

 

Open your browser (chrome or ie) and control-o to open an address.

Enter 192.168.1.1 

 

You’ll be prompted for user id and password.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Laura Richardson
Sent: Wednesday, June 21, 2017 12:08 PM
To: main@jfw.groups.io
Subject: Re: Wireless router password & Jaws

 

Dave,

 

I already have a user name and password of my own …… Someone did this for me many months ago.  I need to learn how to do this myself due to a security breach.  How do I log into the router using this address you gave me?

 

Laura

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dave...
Sent: Wednesday, June 21, 2017 11:45 AM
To: main@jfw.groups.io
Subject: Re: Wireless router password & Jaws

 

Laura,

 

You need to log in to your router using a web browser. Usually the address is 192.168.0.1. But check your documentation. If you've never set a password, then the user names is admin and password is admin. The web GUI is usually quite navigable with JAWS.

 

Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

Sent: Wednesday, June 21, 2017 09:30

Subject: Wireless router password & Jaws

 

Hello,

 

Is it possible to change the password on my wireless router myself using Jaws? …… If so, could someone please tell me how to do this?

 

Thanks,

Laura

 


Re: Buying additional synthesizer voices.

Don H
 

I tried out the vocalizer voices for NVDA and had one issue. Even if you had your speech settings not to say Cap on capital letters it would still say Cap. I contacted the vendors and got no answers as to why this was happening. Don't forget you can download some vocalizer voices for Jaws from their web site. These voices don't have the sam issue with saying Cap in Jaws.
I asked if there were other NVDA users using the Vocalizer voices and got no replies.

On 6/20/2017 2:19 PM, Tim Ford wrote:
Good information. Just changing the subject line to be descriptive.
Tim Ford
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of netbat66
Sent: Tuesday, June 20, 2017 12:10 PM
To: main@jfw.groups.io
Subject: Re: Is There a Possibility...
i know they are expensive. but these voices are not tied to any screen reader.
you don't have to buy a set of voices for every screen reader you have.
they will work with jaws, n v d a. etc. one set of voices for all.
but i wish this company would break up the voice sets to lower the price.
i would only be useing the english voices.
-----Original Message-----
From: Annabelle Susan Morison
Sent: Tuesday, June 20, 2017 11:56 AM
To: main@jfw.groups.io
Subject: Re: Is There a Possibility...
$115? That's a lot a lot of money! That's more than I can spend at the moment!
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of netbat66
Sent: Tuesday, June 20, 2017 10:53 AM
To: main@jfw.groups.io
Subject: Re: Is There a Possibility...
if you have openbook 8, (i don't know about newer versions) then you would be able to use the real speak voices that came with openbook 8. this was a stand alone package.
another option, but is expensive is the stand alone vocalizer voice package from the i t guys. but it costs $115
http://www.atguys.com/store/index.php?main_page=product_info&cPath=20&products_id=242&zenid=ae9c052727036d11230fabd36b129bb0
-----Original Message-----
From: Annabelle Susan Morison
Sent: Tuesday, June 20, 2017 5:36 AM
To: main@jfw.groups.io
Subject: Is There a Possibility...
Of getting the Realspeak Solo Direct Voices to work by themselves outside of
JAWS within the Windows Operating Systems? The reason why I ask this is
because
I have "Gold Wave", an audio software that comes with a text-to-speech
converter, and it seems the only voices I can get to work in there are the
SAPI
voices I've installed on my machine. I've tried installing the Realspeak
voices
from the CD that came with JAWS 8.0, but it says these versions will only work
on 32-bit operating systems. I want to try putting registry keys for these
voices in the Registry Editor, but I'm not sure if this will actually work.
What can I do next?
Virus-free. www.avg.com
---
This email has been checked for viruses by AVG.
http://www.avg.com


Re: Wireless router password & Jaws

Laura Richardson
 

It may be later today before I get a chance to do this but I’ll give this a shot and let y’all know how it goes.

 

Thank you very much for your help.

 

Laura

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dale Heltzer
Sent: Wednesday, June 21, 2017 12:18 PM
To: main@jfw.groups.io
Subject: Re: Wireless router password & Jaws

 

Open your browser (chrome or ie) and control-o to open an address.

Enter 192.168.1.1 

 

You’ll be prompted for user id and password.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Laura Richardson
Sent: Wednesday, June 21, 2017 12:08 PM
To: main@jfw.groups.io
Subject: Re: Wireless router password & Jaws

 

Dave,

 

I already have a user name and password of my own …… Someone did this for me many months ago.  I need to learn how to do this myself due to a security breach.  How do I log into the router using this address you gave me?

 

Laura

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dave...
Sent: Wednesday, June 21, 2017 11:45 AM
To: main@jfw.groups.io
Subject: Re: Wireless router password & Jaws

 

Laura,

 

You need to log in to your router using a web browser. Usually the address is 192.168.0.1. But check your documentation. If you've never set a password, then the user names is admin and password is admin. The web GUI is usually quite navigable with JAWS.

 

Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

Sent: Wednesday, June 21, 2017 09:30

Subject: Wireless router password & Jaws

 

Hello,

 

Is it possible to change the password on my wireless router myself using Jaws? …… If so, could someone please tell me how to do this?

 

Thanks,

Laura