Date   

Re: Need help with using jaws on microsoft online package

Russell Solowoniuk
 

Hi Pam,

I wasn’t able to find the Settings link either, but, by following the below manual steps, it temporarily puts you in the light version. From there you just need to look for an “Options” link, click on that, go to Outlook versions, enter on that, and then check “Change to light version” or something similar. You must then arrow up to the save button and enter on it, log out and then the next time you log in, you should be in the light view. Make sure you delete everything after the question mark (?) in the URL, but not the question mark itself before you enter layout=light. Good luck.

Manual method:
After signing in by whatever method (probably outlook.yourinstitution.com<http://outlook.yourinstitution.com>), look at the address bar, it will probably start with something like the following: https://outlook.office365.com/owa/?blahblahblah
Just go and delete the blahblahblah part, and put in layout=light, so the new address would be https://outlook.office365.com/owa/?layout=light

Russell

On Jun 13, 2017, at 1:31 PM, Ekstrand, Pamela A. -ND <Pamela.A.Ekstrand.-ND@...> wrote:

Can someone please tell me how to find the settings gear that is referenced in these links?

I went back to using Internet Explorer 8 because the mail interface changed so drastically and became too inefficient.  It still works fine there, but I would like to go to IE 11.

I am trying to change to the light interface using Firefox or Chrome in order to test that, but I am not finding the settings.

Thanks for any help.

Pam


________________________________________
From: main@jfw.groups.io [main@jfw.groups.io] on behalf of Russell Solowoniuk [rsolowoniuk@...]
Sent: Tuesday, June 13, 2017 12:10 PM
To: main@jfw.groups.io
Subject: Re: Need help with using jaws on microsoft online package

Hi,

Here are the instructions.
If the following websites instructions don’t work by changing it in the settings, then try the below directions:
Proper way, via settings:
https://msonlinehelpdesk.zendesk.com/hc/en-us/articles/205104708-Switch-Outlook-Web-App-to-use-the-light-weight-classic-look-for-lower-bandwidth-consumption-or-other-reasons

Another site:
https://kb.wisc.edu/page.php?id=34411

Manual method:
After signing in by whatever method (probably outlook.yourinstitution.com<http://outlook.yourinstitution.com>), look at the address bar, it will probably start with something like the following: https://outlook.office365.com/owa/?blahblahblah
Just go and delete the blahblahblah part, and put in layout=light, so the new address would be https://outlook.office365.com/owa/?layout=light

HTH

Russell
On Jun 12, 2017, at 2:44 PM, Adekoya Rasak <rasakadekoya@...<mailto:rasakadekoya@...>> wrote:

hello.
How do I change to the like version.
Please guide me on this.

On 12/06/2017, Russell Solowoniuk <rsolowoniuk@...<mailto:rsolowoniuk@...>> wrote:
Hi,

Yes, I can second the advice to switch to the Light version of Outlook web
access. My workplace also just moved from Groupwise to Outlook last week,
and thankfully a friend had told me earlier about the Outlook Light version.
It works great.

Good luck.

Russell
On Jun 12, 2017, at 11:16 AM, Jim Fettgather <jimfettgather@...<mailto:jimfettgather@...>>
wrote:

Hello, I have found that by far, the most helpful and important option
to change is in Options, outlook version, and to use the lite mode.
Then, you are not presented with Tree Views which are highly difficult
to navigate, but a more typical interface, very similar to Gmail's
Basic HTML version, all check boxes and links are very clearly
labeled, and Outlook on the web in lite mode is very useable.
Thanks.



On 6/12/17, Adekoya Rasak <rasakadekoya@...<mailto:rasakadekoya@...>> wrote:
hello All,

My office just switch to office 365 and I need to know how to access
my company email using microsoftonline.com<http://microsoftonline.com> to access my email in the
situation when I am not at office. I login to the page and signed in
successfully but I have challenge navigating the web page.
I will be usinng the web app soon but not yet.
any help guys. any one with experience on this.

Regard.

--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@...<mailto:radekoya@...>
Skype: Asiwaju.rasak29














--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@...<mailto:radekoya@...>
Skype: Asiwaju.rasak29










Re: Need help with using jaws on microsoft online package

Ekstrand, Pamela A. -ND
 

Can someone please tell me how to find the settings gear that is referenced in these links?

I went back to using Internet Explorer 8 because the mail interface changed so drastically and became too inefficient. It still works fine there, but I would like to go to IE 11.

I am trying to change to the light interface using Firefox or Chrome in order to test that, but I am not finding the settings.

Thanks for any help.

Pam


________________________________________
From: main@jfw.groups.io [main@jfw.groups.io] on behalf of Russell Solowoniuk [rsolowoniuk@gmail.com]
Sent: Tuesday, June 13, 2017 12:10 PM
To: main@jfw.groups.io
Subject: Re: Need help with using jaws on microsoft online package

Hi,

Here are the instructions.
If the following websites instructions don’t work by changing it in the settings, then try the below directions:
Proper way, via settings:
https://msonlinehelpdesk.zendesk.com/hc/en-us/articles/205104708-Switch-Outlook-Web-App-to-use-the-light-weight-classic-look-for-lower-bandwidth-consumption-or-other-reasons

Another site:
https://kb.wisc.edu/page.php?id=34411

Manual method:
After signing in by whatever method (probably outlook.yourinstitution.com<http://outlook.yourinstitution.com>), look at the address bar, it will probably start with something like the following: https://outlook.office365.com/owa/?blahblahblah
Just go and delete the blahblahblah part, and put in layout=light, so the new address would be https://outlook.office365.com/owa/?layout=light

HTH

Russell
On Jun 12, 2017, at 2:44 PM, Adekoya Rasak <rasakadekoya@gmail.com<mailto:rasakadekoya@gmail.com>> wrote:

hello.
How do I change to the like version.
Please guide me on this.

On 12/06/2017, Russell Solowoniuk <rsolowoniuk@gmail.com<mailto:rsolowoniuk@gmail.com>> wrote:
Hi,

Yes, I can second the advice to switch to the Light version of Outlook web
access. My workplace also just moved from Groupwise to Outlook last week,
and thankfully a friend had told me earlier about the Outlook Light version.
It works great.

Good luck.

Russell
On Jun 12, 2017, at 11:16 AM, Jim Fettgather <jimfettgather@gmail.com<mailto:jimfettgather@gmail.com>>
wrote:

Hello, I have found that by far, the most helpful and important option
to change is in Options, outlook version, and to use the lite mode.
Then, you are not presented with Tree Views which are highly difficult
to navigate, but a more typical interface, very similar to Gmail's
Basic HTML version, all check boxes and links are very clearly
labeled, and Outlook on the web in lite mode is very useable.
Thanks.



On 6/12/17, Adekoya Rasak <rasakadekoya@gmail.com<mailto:rasakadekoya@gmail.com>> wrote:
hello All,

My office just switch to office 365 and I need to know how to access
my company email using microsoftonline.com<http://microsoftonline.com> to access my email in the
situation when I am not at office. I login to the page and signed in
successfully but I have challenge navigating the web page.
I will be usinng the web app soon but not yet.
any help guys. any one with experience on this.

Regard.

--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@kemonics.com<mailto:radekoya@kemonics.com>
Skype: Asiwaju.rasak29














--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@kemonics.com<mailto:radekoya@kemonics.com>
Skype: Asiwaju.rasak29


Jaws.API

Richard Turner <richardturner42@...>
 

Greetings,

At work, we use a client database called system 7 produced by the company “Libera.”

It requires Internet Explorer as the browser.

I’ve been having IE crashes and the developers at Libera think it has to do with the fact that the Jaws.API addon isn’t showing up under Manage Addons in the Internet Explorer Options under Programs…

They also said the only way to get it installed is to uninstall Jaws 18 and reinstall it.

 

I did that, but no magical appearance of the Jaws.API.

 

Anyone out there have a clue about this?

 

Thanks,

Richard

 


Re: Word 2016 and JAWS 18

Kevin Hourigan <kevinthourigan@...>
 

Hello Jerry,
One of the options is signatures; what does that do, please?
Cheers Kevin.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Gerry
Ellis
Sent: June 9, 2017 5:05 PM
To: main@jfw.groups.io
Subject: Re: Word 2016 and JAWS 18

Hi,

Let's be a little more precice.

When in the body of the Word document, hit F6 twice to get to the status
line. Hit Shift and F10 to get to the list of choices that you can make
appear or disappear on the status line. Use up and down arrow to find the
one you want to and hit Enter to select or de-select it. Once done hit tab
to say OK.

I hope this helps



Take care,

Gerry Ellis

If you don't know where you're going,
How will you know when you get there?

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Saturday, June 10, 2017 12:59 AM
To: main@jfw.groups.io
Subject: Re: Word 2016 and JAWS 18

f6 should take you to the status bar so you can add the things you want. It
maybe requires the applications menu to apply the settings.
At 06:56 PM 6/9/2017, you wrote:
I'll have to see if I get your same experience when I upgrade to office
2016 here at home.
Jaws gives me page number and the word count and some other information.
Curious.


From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Richard Turner
Sent: Friday, June 09, 2017 7:54 AM
To: main@jfw.groups.io
Subject: Word 2016 and JAWS 18

At work, I have Jaws 18 and Word 2013 and insert+PageDown tells me the
status bar info like page number, line number, etc.
At home using Word 2016, Jaws 18 Home Use, insert+PageDown gives me the
word count.
Where on Earth would I go to make it tell me the page number at least?
I just went through the Word Verbosity settings with insert+v and
didn't find anything useful.

Thanks for any help,
Richard







---
This email has been checked for viruses by AVG.
http://www.avg.com


Re: New Folder

Lisle, Ted (CHFS DMS)
 

Okay, thanks.  I created it to branch off Documents; I got that part right.  It’s intended to hold only financial data, and, Lord willing, will be labeled “Wealth Management”.

 

Ted

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Brian Vogel
Sent: Tuesday, June 13, 2017 1:29 PM
To: main@jfw.groups.io
Subject: Re: New Folder

 

Ted,

        Just FYI, if you use the Windows keyboard shortcut to create a new folder, CTRL+SHIFT+N, when the new folder is created with the initial name, "New Folder," that name is already selected and waiting for you to simply type in the actual name you want.  Of course, if you already created a new folder at some point and hadn't renamed it the new folder created will be named, "New Folder (1)" [or appropriate digit depending on what already exists] but will still be waiting for you to type in the actual name you want and hit Enter to make it stick.
--
Brian  Windows 10 Home, 64-Bit, Version 1703, Build 15063.332

 
If you don't like someone, the way he holds his spoon will make you furious; if you do like him, he can turn his plate over into your lap and you won't mind.     ~ Irving Becker


Re: Touch cursor and weather

Kevin Hourigan <kevinthourigan@...>
 

 

 

Touch Cursor. Shift + JAWSKey +

When the Touch cursor is active, the cursor keys navigate through the elements in the application in a manner similar to gestures on a tablet. Press PC cursor or JAWS cursor to turn off the Touch cursor.

Shift + NumPadPlus

 

Route Touch Cursor To JAWS. Shift + JAWSKey + Apostrophe

If possible, moves the touch cursor to the JAWS cursor location and activates the touch cursor in advanced object navigation mode.

Shift + Insert + NumPadPlusShift + JAWSKey + NumPadPlus

Route JAWS Cursor To Touch. Shift + JAWSKey + [

If possible, moves the JAWS cursor to the element at the touch cursor location. The touch cursor must be on an element with a clickable point for the move to be successful.

Shift + Insert + NumPadMinusShift + JAWSKey + NumPadMinus

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Portia Mason via Groups.Io
Sent: June 13, 2017 10:33 AM
To: main@jfw.groups.io
Subject: Re: Touch cursor and weather

 

How do I do this to set up m location without using the touch cursor. I don’t know how to get it to revert back to the pc cursor to make the necessary changes.

Portia

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kevin Hourigan
Sent: Tuesday, June 13, 2017 10:23 AM
To: main@jfw.groups.io
Subject: Re: Touch cursor and weather

 

Good morning,

Why not revert to the PC cursor while on your laptop?

Cheers Kevin.

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Portia Mason via Groups.Io
Sent: June 13, 2017 6:16 AM
To: main@jfw.groups.io
Subject: Touch cursor and weather

 

Hello and good morning. I am inquiring is anyone here uses the touch cursor and knows how to navigate it well? I am a new user of the touch cursor and it seems a little difficult. I have no problem on my mobile device but on my laptop is a different story. I want to set my weather's location but is this the only way I can do this by using the touch cursor?
Portia


Re: Touch cursor and weather

Portia Mason
 

How do I do this to set up m location without using the touch cursor. I don’t know how to get it to revert back to the pc cursor to make the necessary changes.

Portia

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kevin Hourigan
Sent: Tuesday, June 13, 2017 10:23 AM
To: main@jfw.groups.io
Subject: Re: Touch cursor and weather

 

Good morning,

Why not revert to the PC cursor while on your laptop?

Cheers Kevin.

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Portia Mason via Groups.Io
Sent: June 13, 2017 6:16 AM
To: main@jfw.groups.io
Subject: Touch cursor and weather

 

Hello and good morning. I am inquiring is anyone here uses the touch cursor and knows how to navigate it well? I am a new user of the touch cursor and it seems a little difficult. I have no problem on my mobile device but on my laptop is a different story. I want to set my weather's location but is this the only way I can do this by using the touch cursor?
Portia


Re: New Folder

 

Ted,

        Just FYI, if you use the Windows keyboard shortcut to create a new folder, CTRL+SHIFT+N, when the new folder is created with the initial name, "New Folder," that name is already selected and waiting for you to simply type in the actual name you want.  Of course, if you already created a new folder at some point and hadn't renamed it the new folder created will be named, "New Folder (1)" [or appropriate digit depending on what already exists] but will still be waiting for you to type in the actual name you want and hit Enter to make it stick.
--
Brian  Windows 10 Home, 64-Bit, Version 1703, Build 15063.332

 
If you don't like someone, the way he holds his spoon will make you furious; if you do like him, he can turn his plate over into your lap and you won't mind.     ~ Irving Becker


Re: Touch cursor and weather

Kevin Hourigan <kevinthourigan@...>
 

Good morning,

Why not revert to the PC cursor while on your laptop?

Cheers Kevin.

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Portia Mason via Groups.Io
Sent: June 13, 2017 6:16 AM
To: main@jfw.groups.io
Subject: Touch cursor and weather

 

Hello and good morning. I am inquiring is anyone here uses the touch cursor and knows how to navigate it well? I am a new user of the touch cursor and it seems a little difficult. I have no problem on my mobile device but on my laptop is a different story. I want to set my weather's location but is this the only way I can do this by using the touch cursor?
Portia


Re: Need help with using jaws on microsoft online package

Russell Solowoniuk
 

Hi,

If you use the manual method to switch to the light version (see below), you can then arrow down to Options, and then look for the link to “Outlook version” or something like that, and press enter. From there you will see a checkbox to choose the light version, Check this, arrow up to the “Save” button and press enter. You will then need to log out and then back in to make the change stick. 

Manual method:
After signing in by whatever method (probably outlook.yourinstitution.com), look at the address bar, it will probably start with something like the following: https://outlook.office365.com/owa/?blahblahblah
Just go and delete the blahblahblah part, and put in layout=light, so the new address would be https://outlook.office365.com/owa/?layout=light

On Jun 12, 2017, at 11:12 PM, Adekoya Rasak <rasakadekoya@...> wrote:

Hello Jim,

thank you for this. I tried to login using microsoftonline.com as we
are told in office to do. but I can find any link for settings. Is it
a button or how is it tag?

Please, kindly guide me on this.

Regard.

On 13/06/2017, Sieghard Weitzel <sieghard@...> wrote:
Hi Jim,

Thanks a lot for this, at first I tried to find this with Chrome and could
not, I then tried IE and was able to change it. I am so glad you explained
this because this used to be how my Outlook on the web looked like and then
it changed and I found it very unusable. I haven't tried the light version
with Chrome, but on the regular version Chrome does not read any messages at
all, visually they are there, but Chrome will skip right over the entire
message list.
This is the same when I log into my Bank of Montreal Mastercard account
using Chrome. Jaws reads none of the transaction details, it will read the
column headers like transaction date, date posted, description and the
amount, but no details. If I log in with Internet Explorer all the
transactions are read just fine, I can use table navigation and it works
beautifully. I should mention that I asked one of my employees to look and
visually all the details are there as are the email messages, but there is
something seriously wrong with Chrome on these sites. It really is too bad
since otherwise I find Chrome is very accessible and much faster than IE.
Now I wishMicrosoft would do something about Outlook.com which I use for my
personal email.

Regards,
Sieghard


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Jim
Fettgather
Sent: Monday, June 12, 2017 2:09 PM
To: main@jfw.groups.io
Subject: Re: Need help with using jaws on microsoft online package

I hope that it is possible for you to follow these directions.
Since I am already using the lite version, I was not able to give you
complete instructions using the keyboard, but this may be enough info to get
you started.


Outlook Web App is a fantastic web-based email client for Exchange Online.
It's almost as full-featured as the desktop version, allows offline mail
access, and provides a high level of customization.

It is, however, somewhat bandwidth-hungry. To help with this issue, and also
address older browser needs and provide some accessibility features, the
full-featured version of OWA can be switched to a 'light-weight' classic
version of OWA. To do so, follow these steps:

Sign in to OWA, and click on the settings gear in the upper right to get to
the menu. Then click on Options:

In the Options screen, click on General and then Outlook on the web
version:

Now check the Use the light version of Outlook on the web, and then click on
SAVE:

Note that you will need to sign out and sign back in to see your changes. To
sign out, click on the icon/avatar (or picture, if you've set one!) in the
upper right of the browser, and choose "Sign out".


I hope this may be helpful.


On 6/12/17, Adekoya Rasak <rasakadekoya@...> wrote:
hello.
How do I change to the like version.
Please guide me on this.

On 12/06/2017, Russell Solowoniuk <rsolowoniuk@...> wrote:
Hi,

Yes, I can second the advice to switch to the Light version of
Outlook web access. My workplace also just moved from Groupwise to
Outlook last week, and thankfully a friend had told me earlier about
the Outlook Light version.
It works great.

Good luck.

Russell
On Jun 12, 2017, at 11:16 AM, Jim Fettgather
<jimfettgather@...>
wrote:

Hello, I have found that by far, the most helpful and important
option to change is in Options, outlook version, and to use the lite
mode.
Then, you are not presented with Tree Views which are highly
difficult to navigate, but a more typical interface, very similar to
Gmail's Basic HTML version, all check boxes and links are very
clearly labeled, and Outlook on the web in lite mode is very useable.
Thanks.



On 6/12/17, Adekoya Rasak <rasakadekoya@...> wrote:
hello All,

My office just switch to office 365 and I need to know how to
access my company email using microsoftonline.com to access my
email in the situation when I am not at office. I login to the page
and signed in successfully but I have challenge navigating the web
page.
I will be usinng the web app soon but not yet.
any help guys. any one with experience on this.

Regard.

--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@...
Skype: Asiwaju.rasak29














--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@...
Skype: Asiwaju.rasak29













--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@...
Skype: Asiwaju.rasak29





Re: Need help with using jaws on microsoft online package

Russell Solowoniuk
 

Hi,

Here are the instructions.
If the following websites instructions don’t work by changing it in the settings, then try the below directions:
Proper way, via settings:
 
Another site:
 
Manual method:
After signing in by whatever method (probably outlook.yourinstitution.com), look at the address bar, it will probably start with something like the following: https://outlook.office365.com/owa/?blahblahblah
Just go and delete the blahblahblah part, and put in layout=light, so the new address would be https://outlook.office365.com/owa/?layout=light

HTH

Russell

On Jun 12, 2017, at 2:44 PM, Adekoya Rasak <rasakadekoya@...> wrote:

hello.
How do I change to the like version.
Please guide me on this.

On 12/06/2017, Russell Solowoniuk <rsolowoniuk@...> wrote:
Hi,

Yes, I can second the advice to switch to the Light version of Outlook web
access. My workplace also just moved from Groupwise to Outlook last week,
and thankfully a friend had told me earlier about the Outlook Light version.
It works great.

Good luck.

Russell
On Jun 12, 2017, at 11:16 AM, Jim Fettgather <jimfettgather@...>
wrote:

Hello, I have found that by far, the most helpful and important option
to change is in Options, outlook version, and to use the lite mode.
Then, you are not presented with Tree Views which are highly difficult
to navigate, but a more typical interface, very similar to Gmail's
Basic HTML version, all check boxes and links are very clearly
labeled, and Outlook on the web in lite mode is very useable.
Thanks.



On 6/12/17, Adekoya Rasak <rasakadekoya@...> wrote:
hello All,

My office just switch to office 365 and I need to know how to access
my company email using microsoftonline.com to access my email in the
situation when I am not at office. I login to the page and signed in
successfully but I have challenge navigating the web page.
I will be usinng the web app soon but not yet.
any help guys. any one with experience on this.

Regard.

--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@...
Skype: Asiwaju.rasak29














--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@...
Skype: Asiwaju.rasak29





Touch cursor and weather

Portia Mason
 

Hello and good morning. I am inquiring is anyone here uses the touch cursor and knows how to navigate it well? I am a new user of the touch cursor and it seems a little difficult. I have no problem on my mobile device but on my laptop is a different story. I want to set my weather's location but is this the only way I can do this by using the touch cursor?
Portia


Re: New Folder

Lisle, Ted (CHFS DMS)
 

I thought I tried that, but I was getting rather tired. Thanks again.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Vic Beckley
Sent: Tuesday, June 13, 2017 8:27 AM
To: main@jfw.groups.io
Subject: Re: New Folder

Yes that will work if you have already created the folder. To avoid this
step, you can name the folder when you create it. When you first create the
folder, the folder name "New Folder" is selected and you can type right over
it. Once you type the new name just press enter.


Best Regards From Ohio,

Vic


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of John
Covici
Sent: Tuesday, June 13, 2017 7:54 AM
To: main@jfw.groups.io
Subject: Re: New Folder

Just hit the f2 key and edit the name.

On Tue, 13 Jun 2017 07:51:53 -0400,
Lisle, Ted (CHFS DMS) wrote:

[1 <text/plain; us-ascii (quoted-printable)>]
[2 <text/html; us-ascii (quoted-printable)>]
I'm sure you're all familiar with the "New" menu in Win 7 and probably
later. one of the options is Create New Folder―so far so good. But once you
create it, how do you name or rename it? who the heck wants a dumb name like
"New Folder?"
I'd like the name to reflect the purpose for which I created it―hardly
original.

Ted

Ted Lisle, PH .D. medicaid Spec 3, (502)564-2574

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici
covici@ccs.covici.com


Re: New Folder

Vic Beckley
 

Yes that will work if you have already created the folder. To avoid this
step, you can name the folder when you create it. When you first create the
folder, the folder name "New Folder" is selected and you can type right over
it. Once you type the new name just press enter.


Best Regards From Ohio,

Vic

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of John
Covici
Sent: Tuesday, June 13, 2017 7:54 AM
To: main@jfw.groups.io
Subject: Re: New Folder

Just hit the f2 key and edit the name.

On Tue, 13 Jun 2017 07:51:53 -0400,
Lisle, Ted (CHFS DMS) wrote:

[1 <text/plain; us-ascii (quoted-printable)>]
[2 <text/html; us-ascii (quoted-printable)>]
I'm sure you're all familiar with the "New" menu in Win 7 and probably
later. one of the options is Create New Folder―so far so good. But once you
create it, how do you name or rename it? who the heck wants a dumb name like
"New Folder?"
I'd like the name to reflect the purpose for which I created it―hardly
original.

Ted

Ted Lisle, PH .D. medicaid Spec 3, (502)564-2574

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici
covici@ccs.covici.com


Re: redundant backup options accessibility with JAWS18

Jonas Voll
 

I found out port 5000 is blockt!


Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Shai
Sent: Monday, June 12, 2017 4:35 PM
To: main@jfw.groups.io
Subject: Re: redundant backup options accessibility with JAWS18

Hello Jonas,
I am confused by your question. I went to the site and pressed enter on the link that states dsm live demo. Further down the site they have an item on their page which states try it now for free! I pressed enter on this and then after about a second or so, the demo opened automatically.
Hope that helps


On 6/12/17, Jonas Voll <jonas.voll@envisionus.com> wrote:
Hey, Shai !
How did you get the Synology demo Working?

Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration for
the blind and visually impaired through employment, outreach,
rehabilitation, education and research.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Shai
Sent: Sunday, June 11, 2017 2:14 PM
To: main@jfw.groups.io
Subject: redundant backup options accessibility with JAWS18

Hello,
I am looking for a redundant backup option either hard drive NAS or
cloud-based that is accessible with JAWS18 and works with Windows10.
What are people's recommendations? Such a service should not take up
space on the computer for backup. I have tried Crashplan and Carbonite
but I found that I am only able to initiate the backup but not restore
files. I have also tried the Synology demo and it seems accessible,
but I would want to hear people's experiences to confirm this.
Thank you in advance for any responses




SonicWall identified this message as clean.
To manage your junk mail go to https://nospam.envisionus.com and logon
with your domain userid and password.
If you consider this email to be spam please forward it to
'spam@nospam.envisionus.com'
NOTICE: This electronic mail message and any attached files are
confidential. The information is exclusively for the use of the
individual or entity intended as the recipient. If you are not the
intended recipient, any use, copying, printing, reviewing, retention,
disclosure, distribution or forwarding of the message or any attached
file is not authorized and is strictly prohibited. If you have
received this electronic mail message in error, please advise the
sender by reply electronic mail immediately and permanently delete the
original transmission, any attachments and any copies of this message from your computer system.





NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.


Re: New Folder

Lisle, Ted (CHFS DMS)
 

That oughta work; I'll try it. thanks.

Ted

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of John Covici
Sent: Tuesday, June 13, 2017 7:54 AM
To: main@jfw.groups.io
Subject: Re: New Folder

Just hit the f2 key and edit the name.

On Tue, 13 Jun 2017 07:51:53 -0400,
Lisle, Ted (CHFS DMS) wrote:

[1 <text/plain; us-ascii (quoted-printable)>]
[2 <text/html; us-ascii (quoted-printable)>]
I'm sure you're all familiar with the "New" menu in Win 7 and probably later. one of the options is Create New Folder―so far so good. But once you create it, how do you name or rename it? who the heck wants a dumb name like "New Folder?"
I'd like the name to reflect the purpose for which I created it―hardly original.

Ted

Ted Lisle, PH .D. medicaid Spec 3, (502)564-2574

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici
covici@ccs.covici.com


Re: New Folder

John Covici
 

Just hit the f2 key and edit the name.

On Tue, 13 Jun 2017 07:51:53 -0400,
Lisle, Ted (CHFS DMS) wrote:

[1 <text/plain; us-ascii (quoted-printable)>]
[2 <text/html; us-ascii (quoted-printable)>]
I’m sure you’re all familiar with the “New” menu in Win 7 and probably later. one of the options is Create New Folder―so far so good. But once you create it, how do you name or rename it? who the heck wants a dumb name like “New Folder?”
I’d like the name to reflect the purpose for which I created it―hardly original.

Ted

Ted Lisle, PH .D. medicaid Spec 3, (502)564-2574

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici
covici@ccs.covici.com


New Folder

Lisle, Ted (CHFS DMS)
 

I’m sure you’re all familiar with the “New” menu in Win 7 and probably later.  one of the options is Create New Folder—so far so good.  But once you create it, how do you name or rename it?  who the heck wants a dumb name like “New Folder?” I’d like the name to reflect the purpose for which I created it—hardly original.

 

Ted

 

Ted Lisle, PH .D. medicaid Spec 3, (502)564-2574

 


How do I enable cookies in firefox?

Kimber Gardner
 

Hi all,

I just started using Firefox and I'm struggling a little bit. For
example, when I try to access my gmail accounts I get a message that I
need to enable cookies in firefox, but I can't figure out how to do
that. Also, I'd be glad for any general tips or helpful resources that
will make my transition smoother.

Thanks,
Kim

--
Kimberly


Re: Need help with using jaws on microsoft online package

Adekoya Rasak
 

Hello Jim,

thank you for this. I tried to login using microsoftonline.com as we
are told in office to do. but I can find any link for settings. Is it
a button or how is it tag?

Please, kindly guide me on this.

Regard.

On 13/06/2017, Sieghard Weitzel <sieghard@live.ca> wrote:
Hi Jim,

Thanks a lot for this, at first I tried to find this with Chrome and could
not, I then tried IE and was able to change it. I am so glad you explained
this because this used to be how my Outlook on the web looked like and then
it changed and I found it very unusable. I haven't tried the light version
with Chrome, but on the regular version Chrome does not read any messages at
all, visually they are there, but Chrome will skip right over the entire
message list.
This is the same when I log into my Bank of Montreal Mastercard account
using Chrome. Jaws reads none of the transaction details, it will read the
column headers like transaction date, date posted, description and the
amount, but no details. If I log in with Internet Explorer all the
transactions are read just fine, I can use table navigation and it works
beautifully. I should mention that I asked one of my employees to look and
visually all the details are there as are the email messages, but there is
something seriously wrong with Chrome on these sites. It really is too bad
since otherwise I find Chrome is very accessible and much faster than IE.
Now I wishMicrosoft would do something about Outlook.com which I use for my
personal email.

Regards,
Sieghard


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Jim
Fettgather
Sent: Monday, June 12, 2017 2:09 PM
To: main@jfw.groups.io
Subject: Re: Need help with using jaws on microsoft online package

I hope that it is possible for you to follow these directions.
Since I am already using the lite version, I was not able to give you
complete instructions using the keyboard, but this may be enough info to get
you started.


Outlook Web App is a fantastic web-based email client for Exchange Online.
It's almost as full-featured as the desktop version, allows offline mail
access, and provides a high level of customization.

It is, however, somewhat bandwidth-hungry. To help with this issue, and also
address older browser needs and provide some accessibility features, the
full-featured version of OWA can be switched to a 'light-weight' classic
version of OWA. To do so, follow these steps:

Sign in to OWA, and click on the settings gear in the upper right to get to
the menu. Then click on Options:

In the Options screen, click on General and then Outlook on the web
version:

Now check the Use the light version of Outlook on the web, and then click on
SAVE:

Note that you will need to sign out and sign back in to see your changes. To
sign out, click on the icon/avatar (or picture, if you've set one!) in the
upper right of the browser, and choose "Sign out".


I hope this may be helpful.


On 6/12/17, Adekoya Rasak <rasakadekoya@gmail.com> wrote:
hello.
How do I change to the like version.
Please guide me on this.

On 12/06/2017, Russell Solowoniuk <rsolowoniuk@gmail.com> wrote:
Hi,

Yes, I can second the advice to switch to the Light version of
Outlook web access. My workplace also just moved from Groupwise to
Outlook last week, and thankfully a friend had told me earlier about
the Outlook Light version.
It works great.

Good luck.

Russell
On Jun 12, 2017, at 11:16 AM, Jim Fettgather
<jimfettgather@gmail.com>
wrote:

Hello, I have found that by far, the most helpful and important
option to change is in Options, outlook version, and to use the lite
mode.
Then, you are not presented with Tree Views which are highly
difficult to navigate, but a more typical interface, very similar to
Gmail's Basic HTML version, all check boxes and links are very
clearly labeled, and Outlook on the web in lite mode is very useable.
Thanks.



On 6/12/17, Adekoya Rasak <rasakadekoya@gmail.com> wrote:
hello All,

My office just switch to office 365 and I need to know how to
access my company email using microsoftonline.com to access my
email in the situation when I am not at office. I login to the page
and signed in successfully but I have challenge navigating the web
page.
I will be usinng the web app soon but not yet.
any help guys. any one with experience on this.

Regard.

--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@kemonics.com
Skype: Asiwaju.rasak29








--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@kemonics.com
Skype: Asiwaju.rasak29








--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@kemonics.com
Skype: Asiwaju.rasak29