1. main@jfw.groups.io
  2. Messages
   Date   
Re: Statistical Software

Brian Vogel
 

Miranda,

         You should certainly take a look at PSPP, which is the open-source alternative to IBM's proprietary SPSS.  And, of course, check out whether the organization you'll be working for/with has licensed access to SPSS.
--
Brian  - Windows 10 Home, 64-Bit, Version 1703, Build 15063.332

 
If you don't like someone, the way he holds his spoon will make you furious; if you do like him, he can turn his plate over into your lap and you won't mind.     ~ Irving Becker
Re: how do i scilance the audio ducking in jaws 17 and 18?

douglas richard dexheimer
 

where is randy's reply?

Douglas Richard Dexheimer
Chief of Braille Productions
Born-Again Productions
The Friedman Place, Apt.308
5527 N. Maplewood Ave.
Chicago, IL 60625
home phone 773-409-6163
cell phone 913-244-0612
drichardd@...

On 5/30/2017 7:01 PM, Randy Barnett wrote:
On 5/30/2017 4:21 PM, Mich Verrier wrote:
hello my name is mich verrier. i am using jaws 17 and 18 and i am looking for a way to scilance the audio ducking for ever. i have tryed going in to sounds and comunication and checking the box that says do nothing but it is still happening. where am i going wrong? and how can i get rid of this audio ducking tool tip. from Mich.
msaa info

netbat66
 

is there a hot key to turn msaa off? browse mode for win eyes.
both jaws and win eyes will hang every time i open the firefox bookmark list with control l or control b? alt b etc.
but with win eyes i can turn browse mode off before i open the bookmark list and it will work fine. then turn it back on after i am through searching and close the list.
thanks.
Re: how do i scilance the audio ducking in jaws 17 and 18?

Randy Barnett <randy@...>
 

On 5/30/2017 4:21 PM, Mich Verrier wrote:
hello my name is mich verrier. i am using jaws 17 and 18 and i am looking for a way to scilance the audio ducking for ever. i have tryed going in to sounds and comunication and checking the box that says do nothing but it is still happening. where am i going wrong? and how can i get rid of this audio ducking tool tip. from Mich.
Re: On Line Banking

Kevin Hourigan <kevinthourigan@...>
 

Yes, Jaws even said that the button has focus, but no go.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Randy Barnett
Sent: May 30, 2017 5:02 PM
To: main@jfw.groups.io
Subject: Re: On Line Banking

Sorry that was supposed to be shift + + to activate the touch cursor On
5/30/2017 5:00 PM, Randy Barnett wrote:
did you try the Jaws cursor? and the shift + On 5/30/2017 4:52 PM,
Kevin Hourigan wrote:
No ad blocker.
The pass through, insert 3, did nothing.
Insert plus space bar and left mouse nothing, And I cannot remember
the toggle for the touch cursor.
Thank you for all of your suggestions.
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
netbat66
Sent: May 30, 2017 4:46 PM
To: main@jfw.groups.io
Subject: Re: On Line Banking

are you useing a add on that will block java scripts. like no script.
many pa+ activates the touch cursor
ge control buttons like continue, submit etc. will not activate if
the java scripts are blocked.
are you useing a ad blocker? if so try turning off for your banking
page.

if the confirmation is a pop up it could also be the firefox popup
blocker. try turning this off to see if the page loads.

-----Original Message-----
From: Kevin Hourigan
Sent: Tuesday, May 30, 2017 3:38 PM
To: main@jfw.groups.io
Subject: On Line Banking



Greetings Group,

I am attempting to make a payment on line from my banking site. After
entering the information in the appropriate fields I exit the table
and arrow down to a pay bills button. When I press space bar or enter
on that button the cursor returns to the amount edit field in the
payments table, and the people at the bank tell me I should be
getting a confirmation page instead. They indicated that it is a
technical issue due to my screen reader.

Any suggestions, please?

Jaws 18, Windows 10, IE, all latest build

Thank you,

Kevin.
Re: Changing Keyboard Languages

Gerry Ellis <gerry.ellis@...>
 

Hi,

Wise move.

We don't want the rightful mods left in a position where they have to exercise their rights to have us left out!

OK, I promise . it's finished ... no more!



Take care,

Gerry Ellis

If you don’t know where you’re going,
How will you know when you get there?

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of David & his pack of dogs
Sent: Wednesday, May 31, 2017 1:00 AM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

If you gave your right arm, would it not feel left out from the rest of your body? O K, I will end this thread before I get a message from the mods.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Gerry Ellis
Sent: Tuesday, May 30, 2017 4:51 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

Hi,

No, it means that you were left behind in a left wing but right minded attempt at righteousness. Is that not clear? Let me try again ...

Left-leaning rights are often rightly left out of right-thinking peoples' assessments of rights that are left over from rites that are more appropriate to left-over civilisations.

Oh, I giv up ... i wish I were ambidextrous! In fact, I've give my right arm to be ambidextrous.





Take care,

Gerry Ellis

If you don’t know where you’re going,
How will you know when you get there?

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of David & his pack of dogs
Sent: Tuesday, May 30, 2017 11:56 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

Thanks for the clarification. That would explane why I couldn't exit a program with my right hand but, could with my left hand. Having to use my left hand. Does that mean I was in my right mind? LOL.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Soronel Haetir
Sent: Tuesday, May 30, 2017 3:34 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

One changes language/region the other keyboard layout within a single language.

IE, changing languages is the difference between US English, UK English, Belgian French and Colombian Spanish while keyboard layout is the difference between standard qwerty layout, standard dvorak, left hand dvorak and right hand dvorak.

Note that layouts are specific to a given language/region.

On 5/30/17, David & his pack of dogs <myguidedogis@...> wrote:
Switching to Win10. I think that was part of the problem. I was
using windows 7 commands to change the keyboard language. Control
shift instead of the alt shift, in windows 10. Oh well, we learn something new every day.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Gudrun Brunot
Sent: Tuesday, May 30, 2017 1:57 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

David, that says something about you, even if it doesn't make that
keyboard issue any better. For me, it's control-shift that does it. I
believe one must go and change it under language and region, but don't
quote me on that.
In windows 10, you have this handy switch that involves the spacebar.
That is so much better and it almost makes me want to switch to Sin10.
I have trouble when I use a dictionary software called WordFinder, for
I get inadvertent changes as I go and look up English-Swedish
definition or vice versa. You need the US layout as you operate the
program, the Swedish (or whatever other language) for the word you're
trying to find... And, of course, when you are in the "other-language"
layout, your regular windows hotkeys won't react like you're used to.
So, when you think you just hit control-s to save something, your
system opens Sonar or SoundForge, or whatever program you've given the
hotkey control-alt-s. Oh, aren't we glad of all these ways of wasting our time....



Gudrun


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
David & his pack of dogs
Sent: Tuesday, May 30, 2017 1:20 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

Well, I have 3 languages on my computer as well. Argentine Spanish,
French and English U S. The alt shift command works. We must have
strange things happen or be called strange if not, the world would be
boring. I don't know about all of you, but, my best man's sister said
to my new wife, "Being married to David, I guarantee life will never be boring."

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Gerry Ellis
Sent: Tuesday, May 30, 2017 12:38 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

Hi,

Now here is a funny thing ...

I have 3 keyboard languages installed; Irish, United Kingdom and
United States.

Hitting alt and shift gives me a different result from hitting control
and shift. In one particular case when I am in United States, hitting
control and shift does nothing at all.

Very strange!



Take care,

Gerry Ellis

If you don't know where you're going,
How will you know when you get there?


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
David & his pack of dogs
Sent: Tuesday, May 30, 2017 4:54 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

Ah, hah, the mystery is solved. Yes, hitting alt and shift, did
switch the keyboard language. I tested it while listening to your
message. Then of course, had to use the prior commands to switch it back to U S. Thanks.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
James Homuth
Sent: Tuesday, May 30, 2017 8:36 AM
To: main@jfw.groups.io
Subject: Changing Keyboard Languages

I don't know if it's the same for yours, but pressing alt+shift on my
keyboard by itself switched the language whether I wanted it to or
not. I used to do that frequently when I was intending to do something
else. I don't know of a way to disable that feature, so I ended up
removing every keyboard language on the system except the one I was
using. Bing bang boom problem solved.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
David & his pack of dogs
Sent: May-30-17 11:34 AM
To: main@jfw.groups.io
Subject: Re: JAWS tutorials?

Once again I fouled up the language on my keyboard. I just went into
the start menu and typed out my request for "How do I change the
language on my keyboard" Don't know if it was JAWS or the info itself.
But, it said to hold down the windows key and cycle through the
languages by continueing to hit the space bar till I heard the
language I wanted. So, if it was a JAWS tutorial, it was very helpful.
To date, I have no idea how I switched languages on the keyboard in
the first place. But, at least I know now, how to fix my screw ups.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lee
Anne Atkinson
Sent: Tuesday, May 30, 2017 8:23 AM
To: main@jfw.groups.io
Subject: Re: Newby

Hi Vic,

Welcome! The only silly question is the one you don't ask. The JAWS
help topics are very helpful and this list even more so.

Good luck with learning JAWS.

Lee Anne

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Vic
Beckley
Sent: Tuesday, May 30, 2017 10:31 AM
To: main@jfw.groups.io
Subject: Newby

Hello,

I am a new convert from the debunked Window-Eyes screen reader. I am
trying to learn JAWS as quickly as possible. I may ask some very silly questions.
I
hope you will bear with me during this process. Thanks in advance for
any help.


Vic Beckley






















---
This email has been checked for viruses by AVG.
http://www.avg.com
















--
Soronel Haetir
soronel.haetir@...
Re: On Line Banking

Randy Barnett <randy@...>
 

Sorry that was supposed to be shift + + to activate the touch cursor On 5/30/2017 5:00 PM, Randy Barnett wrote:

did you try the Jaws cursor? and the shift +
On 5/30/2017 4:52 PM, Kevin Hourigan wrote:
No ad blocker.
The pass through, insert 3, did nothing.
Insert plus space bar and left mouse nothing,
And I cannot remember the toggle for the touch cursor.
Thank you for all of your suggestions.
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of netbat66
Sent: May 30, 2017 4:46 PM
To: main@jfw.groups.io
Subject: Re: On Line Banking

are you useing a add on that will block java scripts. like no script. many pa+ activates the touch cursor
ge control buttons like continue, submit etc. will not activate if the java scripts are blocked.
are you useing a ad blocker? if so try turning off for your banking page.

if the confirmation is a pop up it could also be the firefox popup blocker. try turning this off to see if the page loads.

-----Original Message-----
From: Kevin Hourigan
Sent: Tuesday, May 30, 2017 3:38 PM
To: main@jfw.groups.io
Subject: On Line Banking



Greetings Group,

I am attempting to make a payment on line from my banking site. After entering
the information in the appropriate fields I exit the table and arrow down to a
pay bills button. When I press space bar or enter on that button the cursor
returns to the amount edit field in the payments table, and the people at the
bank tell me I should be getting a confirmation page instead. They indicated
that it is a technical issue due to my screen reader.

Any suggestions, please?

Jaws 18, Windows 10, IE, all latest build

Thank you,

Kevin.
Re: On Line Banking

Randy Barnett <randy@...>
 

did you try the Jaws cursor? and the shift +

On 5/30/2017 4:52 PM, Kevin Hourigan wrote:
No ad blocker.
The pass through, insert 3, did nothing.
Insert plus space bar and left mouse nothing,
And I cannot remember the toggle for the touch cursor.
Thank you for all of your suggestions.
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of netbat66
Sent: May 30, 2017 4:46 PM
To: main@jfw.groups.io
Subject: Re: On Line Banking

are you useing a add on that will block java scripts. like no script. many pa+ activates the touch cursor
ge control buttons like continue, submit etc. will not activate if the java scripts are blocked.
are you useing a ad blocker? if so try turning off for your banking page.

if the confirmation is a pop up it could also be the firefox popup blocker. try turning this off to see if the page loads.

-----Original Message-----
From: Kevin Hourigan
Sent: Tuesday, May 30, 2017 3:38 PM
To: main@jfw.groups.io
Subject: On Line Banking



Greetings Group,

I am attempting to make a payment on line from my banking site. After entering
the information in the appropriate fields I exit the table and arrow down to a
pay bills button. When I press space bar or enter on that button the cursor
returns to the amount edit field in the payments table, and the people at the
bank tell me I should be getting a confirmation page instead. They indicated
that it is a technical issue due to my screen reader.

Any suggestions, please?

Jaws 18, Windows 10, IE, all latest build

Thank you,

Kevin.
Re: Changing Keyboard Languages

David & his pack of dogs <myguidedogis@...>
 

If you gave your right arm, would it not feel left out from the rest of your body? O K, I will end this thread before I get a message from the mods.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Gerry Ellis
Sent: Tuesday, May 30, 2017 4:51 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

Hi,

No, it means that you were left behind in a left wing but right minded attempt at righteousness. Is that not clear? Let me try again ...

Left-leaning rights are often rightly left out of right-thinking peoples' assessments of rights that are left over from rites that are more appropriate to left-over civilisations.

Oh, I giv up ... i wish I were ambidextrous! In fact, I've give my right arm to be ambidextrous.





Take care,

Gerry Ellis

If you don’t know where you’re going,
How will you know when you get there?

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of David & his pack of dogs
Sent: Tuesday, May 30, 2017 11:56 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

Thanks for the clarification. That would explane why I couldn't exit a program with my right hand but, could with my left hand. Having to use my left hand. Does that mean I was in my right mind? LOL.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Soronel Haetir
Sent: Tuesday, May 30, 2017 3:34 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

One changes language/region the other keyboard layout within a single language.

IE, changing languages is the difference between US English, UK English, Belgian French and Colombian Spanish while keyboard layout is the difference between standard qwerty layout, standard dvorak, left hand dvorak and right hand dvorak.

Note that layouts are specific to a given language/region.

On 5/30/17, David & his pack of dogs <myguidedogis@...> wrote:
Switching to Win10. I think that was part of the problem. I was
using windows 7 commands to change the keyboard language. Control
shift instead of the alt shift, in windows 10. Oh well, we learn something new every day.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Gudrun Brunot
Sent: Tuesday, May 30, 2017 1:57 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

David, that says something about you, even if it doesn't make that
keyboard issue any better. For me, it's control-shift that does it. I
believe one must go and change it under language and region, but don't
quote me on that.
In windows 10, you have this handy switch that involves the spacebar.
That is so much better and it almost makes me want to switch to Sin10.
I have trouble when I use a dictionary software called WordFinder, for
I get inadvertent changes as I go and look up English-Swedish
definition or vice versa. You need the US layout as you operate the
program, the Swedish (or whatever other language) for the word you're
trying to find... And, of course, when you are in the "other-language"
layout, your regular windows hotkeys won't react like you're used to.
So, when you think you just hit control-s to save something, your
system opens Sonar or SoundForge, or whatever program you've given the
hotkey control-alt-s. Oh, aren't we glad of all these ways of wasting our time....



Gudrun


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
David & his pack of dogs
Sent: Tuesday, May 30, 2017 1:20 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

Well, I have 3 languages on my computer as well. Argentine Spanish,
French and English U S. The alt shift command works. We must have
strange things happen or be called strange if not, the world would be
boring. I don't know about all of you, but, my best man's sister said
to my new wife, "Being married to David, I guarantee life will never be boring."

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Gerry Ellis
Sent: Tuesday, May 30, 2017 12:38 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

Hi,

Now here is a funny thing ...

I have 3 keyboard languages installed; Irish, United Kingdom and
United States.

Hitting alt and shift gives me a different result from hitting control
and shift. In one particular case when I am in United States, hitting
control and shift does nothing at all.

Very strange!



Take care,

Gerry Ellis

If you don't know where you're going,
How will you know when you get there?


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
David & his pack of dogs
Sent: Tuesday, May 30, 2017 4:54 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

Ah, hah, the mystery is solved. Yes, hitting alt and shift, did
switch the keyboard language. I tested it while listening to your
message. Then of course, had to use the prior commands to switch it back to U S. Thanks.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
James Homuth
Sent: Tuesday, May 30, 2017 8:36 AM
To: main@jfw.groups.io
Subject: Changing Keyboard Languages

I don't know if it's the same for yours, but pressing alt+shift on my
keyboard by itself switched the language whether I wanted it to or
not. I used to do that frequently when I was intending to do something
else. I don't know of a way to disable that feature, so I ended up
removing every keyboard language on the system except the one I was
using. Bing bang boom problem solved.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
David & his pack of dogs
Sent: May-30-17 11:34 AM
To: main@jfw.groups.io
Subject: Re: JAWS tutorials?

Once again I fouled up the language on my keyboard. I just went into
the start menu and typed out my request for "How do I change the
language on my keyboard" Don't know if it was JAWS or the info itself.
But, it said to hold down the windows key and cycle through the
languages by continueing to hit the space bar till I heard the
language I wanted. So, if it was a JAWS tutorial, it was very helpful.
To date, I have no idea how I switched languages on the keyboard in
the first place. But, at least I know now, how to fix my screw ups.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lee
Anne Atkinson
Sent: Tuesday, May 30, 2017 8:23 AM
To: main@jfw.groups.io
Subject: Re: Newby

Hi Vic,

Welcome! The only silly question is the one you don't ask. The JAWS
help topics are very helpful and this list even more so.

Good luck with learning JAWS.

Lee Anne

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Vic
Beckley
Sent: Tuesday, May 30, 2017 10:31 AM
To: main@jfw.groups.io
Subject: Newby

Hello,

I am a new convert from the debunked Window-Eyes screen reader. I am
trying to learn JAWS as quickly as possible. I may ask some very silly questions.
I
hope you will bear with me during this process. Thanks in advance for
any help.


Vic Beckley






















---
This email has been checked for viruses by AVG.
http://www.avg.com
















--
Soronel Haetir
soronel.haetir@...
Re: On Line Banking

Angel
 

In such a case, it is often a good idea to either use

an alternative browser, such as fire fox or chrome, or screen reader.  My banking sight became unusable completely with what I was using.  So, I changed to fire fox, and nvda; and things worked well for me.  But, I am not using the latest builds or versions of either browser or Jaws.----- Original Message -----
Sent: Tuesday, May 30, 2017 6:38 PM
Subject: On Line Banking

Greetings Group,

I am attempting to make a payment on line from my banking site. After entering the information in the appropriate fields I exit the table and arrow down to a pay bills button. When I press space bar or enter on that button the cursor returns to the amount edit field in the payments table, and the people at the bank tell me I should be getting a confirmation page instead. They indicated that it is a technical issue due to my screen reader.

Any suggestions, please?

Jaws 18, Windows 10, IE, all latest build

Thank you,

Kevin.

Re: On Line Banking

Kevin Hourigan <kevinthourigan@...>
 

No ad blocker.
The pass through, insert 3, did nothing.
Insert plus space bar and left mouse nothing,
And I cannot remember the toggle for the touch cursor.
Thank you for all of your suggestions.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of netbat66
Sent: May 30, 2017 4:46 PM
To: main@jfw.groups.io
Subject: Re: On Line Banking

are you useing a add on that will block java scripts. like no script. many page control buttons like continue, submit etc. will not activate if the java scripts are blocked.
are you useing a ad blocker? if so try turning off for your banking page.

if the confirmation is a pop up it could also be the firefox popup blocker. try turning this off to see if the page loads.

-----Original Message-----
From: Kevin Hourigan
Sent: Tuesday, May 30, 2017 3:38 PM
To: main@jfw.groups.io
Subject: On Line Banking



Greetings Group,

I am attempting to make a payment on line from my banking site. After entering
the information in the appropriate fields I exit the table and arrow down to a
pay bills button. When I press space bar or enter on that button the cursor
returns to the amount edit field in the payments table, and the people at the
bank tell me I should be getting a confirmation page instead. They indicated
that it is a technical issue due to my screen reader.

Any suggestions, please?

Jaws 18, Windows 10, IE, all latest build

Thank you,

Kevin.
Re: Changing Keyboard Languages

Gerry Ellis <gerry.ellis@...>
 

Hi,

No, it means that you were left behind in a left wing but right minded attempt at righteousness. Is that not clear? Let me try again ...

Left-leaning rights are often rightly left out of right-thinking peoples' assessments of rights that are left over from rites that are more appropriate to left-over civilisations.

Oh, I giv up ... i wish I were ambidextrous! In fact, I've give my right arm to be ambidextrous.





Take care,

Gerry Ellis

If you don’t know where you’re going,
How will you know when you get there?

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of David & his pack of dogs
Sent: Tuesday, May 30, 2017 11:56 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

Thanks for the clarification. That would explane why I couldn't exit a program with my right hand but, could with my left hand. Having to use my left hand. Does that mean I was in my right mind? LOL.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Soronel Haetir
Sent: Tuesday, May 30, 2017 3:34 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

One changes language/region the other keyboard layout within a single language.

IE, changing languages is the difference between US English, UK English, Belgian French and Colombian Spanish while keyboard layout is the difference between standard qwerty layout, standard dvorak, left hand dvorak and right hand dvorak.

Note that layouts are specific to a given language/region.

On 5/30/17, David & his pack of dogs <myguidedogis@...> wrote:
Switching to Win10. I think that was part of the problem. I was
using windows 7 commands to change the keyboard language. Control
shift instead of the alt shift, in windows 10. Oh well, we learn something new every day.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Gudrun Brunot
Sent: Tuesday, May 30, 2017 1:57 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

David, that says something about you, even if it doesn't make that
keyboard issue any better. For me, it's control-shift that does it. I
believe one must go and change it under language and region, but don't
quote me on that.
In windows 10, you have this handy switch that involves the spacebar.
That is so much better and it almost makes me want to switch to Sin10.
I have trouble when I use a dictionary software called WordFinder, for
I get inadvertent changes as I go and look up English-Swedish
definition or vice versa. You need the US layout as you operate the
program, the Swedish (or whatever other language) for the word you're
trying to find... And, of course, when you are in the "other-language"
layout, your regular windows hotkeys won't react like you're used to.
So, when you think you just hit control-s to save something, your
system opens Sonar or SoundForge, or whatever program you've given the
hotkey control-alt-s. Oh, aren't we glad of all these ways of wasting our time....



Gudrun


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
David & his pack of dogs
Sent: Tuesday, May 30, 2017 1:20 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

Well, I have 3 languages on my computer as well. Argentine Spanish,
French and English U S. The alt shift command works. We must have
strange things happen or be called strange if not, the world would be
boring. I don't know about all of you, but, my best man's sister said
to my new wife, "Being married to David, I guarantee life will never be boring."

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Gerry Ellis
Sent: Tuesday, May 30, 2017 12:38 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

Hi,

Now here is a funny thing ...

I have 3 keyboard languages installed; Irish, United Kingdom and
United States.

Hitting alt and shift gives me a different result from hitting control
and shift. In one particular case when I am in United States, hitting
control and shift does nothing at all.

Very strange!



Take care,

Gerry Ellis

If you don't know where you're going,
How will you know when you get there?


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
David & his pack of dogs
Sent: Tuesday, May 30, 2017 4:54 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

Ah, hah, the mystery is solved. Yes, hitting alt and shift, did
switch the keyboard language. I tested it while listening to your
message. Then of course, had to use the prior commands to switch it back to U S. Thanks.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
James Homuth
Sent: Tuesday, May 30, 2017 8:36 AM
To: main@jfw.groups.io
Subject: Changing Keyboard Languages

I don't know if it's the same for yours, but pressing alt+shift on my
keyboard by itself switched the language whether I wanted it to or
not. I used to do that frequently when I was intending to do something
else. I don't know of a way to disable that feature, so I ended up
removing every keyboard language on the system except the one I was
using. Bing bang boom problem solved.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
David & his pack of dogs
Sent: May-30-17 11:34 AM
To: main@jfw.groups.io
Subject: Re: JAWS tutorials?

Once again I fouled up the language on my keyboard. I just went into
the start menu and typed out my request for "How do I change the
language on my keyboard" Don't know if it was JAWS or the info itself.
But, it said to hold down the windows key and cycle through the
languages by continueing to hit the space bar till I heard the
language I wanted. So, if it was a JAWS tutorial, it was very helpful.
To date, I have no idea how I switched languages on the keyboard in
the first place. But, at least I know now, how to fix my screw ups.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lee
Anne Atkinson
Sent: Tuesday, May 30, 2017 8:23 AM
To: main@jfw.groups.io
Subject: Re: Newby

Hi Vic,

Welcome! The only silly question is the one you don't ask. The JAWS
help topics are very helpful and this list even more so.

Good luck with learning JAWS.

Lee Anne

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Vic
Beckley
Sent: Tuesday, May 30, 2017 10:31 AM
To: main@jfw.groups.io
Subject: Newby

Hello,

I am a new convert from the debunked Window-Eyes screen reader. I am
trying to learn JAWS as quickly as possible. I may ask some very silly questions.
I
hope you will bear with me during this process. Thanks in advance for
any help.


Vic Beckley






















---
This email has been checked for viruses by AVG.
http://www.avg.com
















--
Soronel Haetir
soronel.haetir@...
Re: On Line Banking

netbat66
 

are you useing a add on that will block java scripts. like no script. many page control buttons like continue, submit etc. will not activate if the java scripts are blocked.
are you useing a ad blocker? if so try turning off for your banking page.

if the confirmation is a pop up it could also be the firefox popup blocker. try turning this off to see if the page loads.

-----Original Message-----
From: Kevin Hourigan
Sent: Tuesday, May 30, 2017 3:38 PM
To: main@jfw.groups.io
Subject: On Line Banking



Greetings Group,

I am attempting to make a payment on line from my banking site. After entering the information in the appropriate fields I exit the table and arrow down to a pay bills button. When I press space bar or enter on that button the cursor returns to the amount edit field in the payments table, and the people at the bank tell me I should be getting a confirmation page instead. They indicated that it is a technical issue due to my screen reader.

Any suggestions, please?

Jaws 18, Windows 10, IE, all latest build

Thank you,

Kevin.
Re: On Line Banking

Gerry Ellis <gerry.ellis@...>
 

Hi,

You could try hitting JawsKey and 3 before clicking the final button. That may cut JAWS out of the situation and send the command intended by the button directly to the payments engine.

 

 

 

Take care,

 

Gerry Ellis

 

If you don’t know where you’re going,

How will you know when you get there?

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kevin Hourigan
Sent: Tuesday, May 30, 2017 11:39 PM
To: main@jfw.groups.io
Subject: On Line Banking

 

Greetings Group,

I am attempting to make a payment on line from my banking site. After entering the information in the appropriate fields I exit the table and arrow down to a pay bills button. When I press space bar or enter on that button the cursor returns to the amount edit field in the payments table, and the people at the bank tell me I should be getting a confirmation page instead. They indicated that it is a technical issue due to my screen reader.

Any suggestions, please?

Jaws 18, Windows 10, IE, all latest build

Thank you,

Kevin.


Virus-free. www.avg.com

how do i scilance the audio ducking in jaws 17 and 18?

Mich Verrier
 

hello my name is mich verrier. i am using jaws 17 and 18 and i am looking for a way to scilance the audio ducking for ever. i have tryed going in to sounds and comunication and checking the box that says do nothing but it is still happening. where am i going wrong? and how can i get rid of this audio ducking tool tip. from Mich.
Re: On Line Banking

Dave...
 

Try routing your JAWS cursor to the button and perform a left click.
 
Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer
 
 

----- Original Message -----
Sent: Tuesday, May 30, 2017 15:38
Subject: On Line Banking

Greetings Group,

I am attempting to make a payment on line from my banking site. After entering the information in the appropriate fields I exit the table and arrow down to a pay bills button. When I press space bar or enter on that button the cursor returns to the amount edit field in the payments table, and the people at the bank tell me I should be getting a confirmation page instead. They indicated that it is a technical issue due to my screen reader.

Any suggestions, please?

Jaws 18, Windows 10, IE, all latest build

Thank you,

Kevin.

Re: On Line Banking

Randy Barnett <randy@...>
 

sometimes you have to use the Jaws cursor to activate the button. insert + - then arrow to the button and press the left click. Or try the touch cursor. On 5/30/2017 3:38 PM, Kevin Hourigan wrote:

Greetings Group,

I am attempting to make a payment on line from my banking site. After entering the information in the appropriate fields I exit the table and arrow down to a pay bills button. When I press space bar or enter on that button the cursor returns to the amount edit field in the payments table, and the people at the bank tell me I should be getting a confirmation page instead. They indicated that it is a technical issue due to my screen reader.

Any suggestions, please?

Jaws 18, Windows 10, IE, all latest build

Thank you,

Kevin.


Re: Changing Keyboard Languages

David & his pack of dogs <myguidedogis@...>
 

Thanks for the clarification. That would explane why I couldn't exit a program with my right hand but, could with my left hand. Having to use my left hand. Does that mean I was in my right mind? LOL.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Soronel Haetir
Sent: Tuesday, May 30, 2017 3:34 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

One changes language/region the other keyboard layout within a single language.

IE, changing languages is the difference between US English, UK English, Belgian French and Colombian Spanish while keyboard layout is the difference between standard qwerty layout, standard dvorak, left hand dvorak and right hand dvorak.

Note that layouts are specific to a given language/region.

On 5/30/17, David & his pack of dogs <myguidedogis@...> wrote:
Switching to Win10. I think that was part of the problem. I was
using windows 7 commands to change the keyboard language. Control
shift instead of the alt shift, in windows 10. Oh well, we learn something new every day.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Gudrun Brunot
Sent: Tuesday, May 30, 2017 1:57 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

David, that says something about you, even if it doesn't make that
keyboard issue any better. For me, it's control-shift that does it. I
believe one must go and change it under language and region, but don't
quote me on that.
In windows 10, you have this handy switch that involves the spacebar.
That is so much better and it almost makes me want to switch to Sin10.
I have trouble when I use a dictionary software called WordFinder, for
I get inadvertent changes as I go and look up English-Swedish
definition or vice versa. You need the US layout as you operate the
program, the Swedish (or whatever other language) for the word you're
trying to find... And, of course, when you are in the "other-language"
layout, your regular windows hotkeys won't react like you're used to.
So, when you think you just hit control-s to save something, your
system opens Sonar or SoundForge, or whatever program you've given the
hotkey control-alt-s. Oh, aren't we glad of all these ways of wasting our time....



Gudrun


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
David & his pack of dogs
Sent: Tuesday, May 30, 2017 1:20 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

Well, I have 3 languages on my computer as well. Argentine Spanish,
French and English U S. The alt shift command works. We must have
strange things happen or be called strange if not, the world would be
boring. I don't know about all of you, but, my best man's sister said
to my new wife, "Being married to David, I guarantee life will never be boring."

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Gerry Ellis
Sent: Tuesday, May 30, 2017 12:38 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

Hi,

Now here is a funny thing ...

I have 3 keyboard languages installed; Irish, United Kingdom and
United States.

Hitting alt and shift gives me a different result from hitting control
and shift. In one particular case when I am in United States, hitting
control and shift does nothing at all.

Very strange!



Take care,

Gerry Ellis

If you don't know where you're going,
How will you know when you get there?


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
David & his pack of dogs
Sent: Tuesday, May 30, 2017 4:54 PM
To: main@jfw.groups.io
Subject: Re: Changing Keyboard Languages

Ah, hah, the mystery is solved. Yes, hitting alt and shift, did
switch the keyboard language. I tested it while listening to your
message. Then of course, had to use the prior commands to switch it back to U S. Thanks.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
James Homuth
Sent: Tuesday, May 30, 2017 8:36 AM
To: main@jfw.groups.io
Subject: Changing Keyboard Languages

I don't know if it's the same for yours, but pressing alt+shift on my
keyboard by itself switched the language whether I wanted it to or
not. I used to do that frequently when I was intending to do something
else. I don't know of a way to disable that feature, so I ended up
removing every keyboard language on the system except the one I was
using. Bing bang boom problem solved.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
David & his pack of dogs
Sent: May-30-17 11:34 AM
To: main@jfw.groups.io
Subject: Re: JAWS tutorials?

Once again I fouled up the language on my keyboard. I just went into
the start menu and typed out my request for "How do I change the
language on my keyboard" Don't know if it was JAWS or the info itself.
But, it said to hold down the windows key and cycle through the
languages by continueing to hit the space bar till I heard the
language I wanted. So, if it was a JAWS tutorial, it was very helpful.
To date, I have no idea how I switched languages on the keyboard in
the first place. But, at least I know now, how to fix my screw ups.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lee
Anne Atkinson
Sent: Tuesday, May 30, 2017 8:23 AM
To: main@jfw.groups.io
Subject: Re: Newby

Hi Vic,

Welcome! The only silly question is the one you don't ask. The JAWS
help topics are very helpful and this list even more so.

Good luck with learning JAWS.

Lee Anne

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Vic
Beckley
Sent: Tuesday, May 30, 2017 10:31 AM
To: main@jfw.groups.io
Subject: Newby

Hello,

I am a new convert from the debunked Window-Eyes screen reader. I am
trying to learn JAWS as quickly as possible. I may ask some very silly questions.
I
hope you will bear with me during this process. Thanks in advance for
any help.


Vic Beckley






















---
This email has been checked for viruses by AVG.
http://www.avg.com
















--
Soronel Haetir
soronel.haetir@...
Re: On Line Banking

David & his pack of dogs <myguidedogis@...>
 

I  personally use firefox to receive payments.  The one constant is, make sure you use the same browser when doing online banking.  I used I E without thinking and after 3 attempts, got locked out of my account.  Security you know.  I had to go to the bank institution to resolve the problem.  Or specifically get the block removed.  Just yesterday I used JAWS 18 to receive a payment and it worked fine. 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Gene Stevens
Sent: Tuesday, May 30, 2017 3:46 PM
To: main@jfw.groups.io
Subject: Re: On Line Banking

 

Try Firefox or Chrome. I've found many banking sites have issues with IE.   

----- Original Message -----

Sent: Tuesday, May 30, 2017 6:38 PM

Subject: On Line Banking

 

Greetings Group,

I am attempting to make a payment on line from my banking site. After entering the information in the appropriate fields I exit the table and arrow down to a pay bills button. When I press space bar or enter on that button the cursor returns to the amount edit field in the payments table, and the people at the bank tell me I should be getting a confirmation page instead. They indicated that it is a technical issue due to my screen reader.

Any suggestions, please?

Jaws 18, Windows 10, IE, all latest build

Thank you,

Kevin.

Re: On Line Banking

Gene Stevens
 

Try Firefox or Chrome. I've found many banking sites have issues with IE.   

----- Original Message -----
Sent: Tuesday, May 30, 2017 6:38 PM
Subject: On Line Banking

Greetings Group,

I am attempting to make a payment on line from my banking site. After entering the information in the appropriate fields I exit the table and arrow down to a pay bills button. When I press space bar or enter on that button the cursor returns to the amount edit field in the payments table, and the people at the bank tell me I should be getting a confirmation page instead. They indicated that it is a technical issue due to my screen reader.

Any suggestions, please?

Jaws 18, Windows 10, IE, all latest build

Thank you,

Kevin.

48641 - 48660 of 98042