Date   

Re: Setting Tabs In A Word Document

 

Tab setting, particularly with the Paragraph Dialog Box, has been pretty much the same forever.

Have a look at this webpage:  http://www.dummies.com/software/microsoft-office/word/how-to-use-the-tabs-dialog-box-to-set-tabs-in-word-2016/ 

If anything "doesn't translate" I'll fire up NVDA or JAWS to see what's announced.  That control to bring up the is the last in the paragraph group in the ribbon.  If you wish to bring it up directly via a keyboard shortcut use ALT+H, PG  (Open the Home tab/ribbon, go straight to the Paragraph dialog box).
--
Brian

     A great deal of intelligence can be invested in ignorance when the need for illusion is deep.

    ~ Saul BellowTo Jerusalem and Back


Re: compatability mode

Mike B. <mb69mach1@...>
 


Hi Jed,
 
First I used the status line keystroke with the file open, Insert + Page down, & it says there's no text to read, actually it says, no characters.  But, I tried other ottions like the Jaws OCR feature, & nothing as well, then I tried Openbook, & it found no text either.  So, I don't think there's anything to read.
Take care.
Mike
Sent from my iBarstool.

----- Original Message -----
From: Jed Barton
Sent: Wednesday, February 22, 2017 12:52 PM
Subject: compatability mode

Hey guys,

OK, i am having a hhge probem reading a manual with jfw 17 and word.  It
keeps telling me that a file is in compatability mode.  how do i get it
out of this.  It's screwing everything up0



Contact for Wells Fargo accessibility issues: copying from Wells Fargo "results" web page.

Tim Ford
 

Hello Curtis,

As I found out to my irritation, Wells Fargo did a major revision to their
on-line banking web site. I suddenly could not do many of the tasks that I
had previously been able to do with JAWS. JAWS 17 seemed to help, and I
also found that Firefox worked better.

Below my closing is the contact person I was given by Wells Fargo when I
complained about the access issues in their new web design. He is a private
accessibility consultant.

Good luck,
Tim Ford


David Ashleydale
Operational Risk Consultant / Accessibility Governance Lead
WFVC Risk Management
Wells Fargo Virtual Channels
333 Market Street, 27th Floor| San Francisco, CA 94104
MAC A0119-271
Tel 415-371-5880
david.ashleydale@wellsfargo.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Curtis
Delzer
Sent: Wednesday, February 22, 2017 2:01 PM
To: main@jfw.groups.io
Subject: copying from Wells Fargo "results" web page.

My wife uses jaws 18 and before she could just copy the results of the
bill pay page after the transactions to the clipboard and paste into
notepad or word, but now, it does not work for her.
Is there a setting in JFW which has changed it's default between 17 and
18, or, is the update to the Wells Fargo web site screwing it up for her?
When she copies to the clipboard, and attempts to paste, nothing gets
carried over into the paste action, and after a while, the web page
times out for security reasons.
Anyone have ideas as to what could be happening?
She is not a member of this list so any results anyone comes up with
I'll forward to her.
THANK YOU ALL!

-----
Curtis Delzer, HS.
K6VFO
San Bernardino, CA


Re: compatability mode

Mike B. <mb69mach1@...>
 


Hi Jed,
 
My email is below:
 
 
Take care.
Mike
Sent from my iBarstool.

----- Original Message -----
From: Jed Barton
Sent: Wednesday, February 22, 2017 1:53 PM
Subject: Re: compatability mode

I have no idea.
I can't even get it to open in word pad.  It just dings at me when i
arrow around.  My god, this should not be this complicated.
I've already spent close to 2 hours fighting with this.
What's your email

On 2/22/2017 4:51 PM, Mike B. wrote:
> Hi Jed,
>
> Can you select all the text, copy it to the clipboard,  & paste it into
> a text file, or a new Word document?  If the document isn't of some
> private nature, send it to me off list, & I'll see if I can extract the
> contents from it, & send it back to you.
> Take care.
> Mike
> Sent from my iBarstool.
> ----- Original Message -----
> *From:* Jed Barton <mailto:jed@...>
> *To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
> *Sent:* Wednesday, February 22, 2017 1:24 PM
> *Subject:* Re: compatability mode
>
> Something is major wrong ehre guys.  I finaly got word to shut down.
> Then i clicked on the file again, but i can see no text.  Is there any
> way to get around this?  It's really annoying.  I've already wasted 45
> minutes on this.  All i wanna do is read this document.  Any ideas on
> what to do?  When i do control home, it just says top of file.  It
> almost sounds like something is blocking jfw from reading it.  Any ideas?
>
> On 2/22/2017 4:21 PM, Jed Barton wrote:
>> What i don't understand, why itkeeps hosing my computer.  The document,
>> i only got it to work once.
>> When i tab or arrow throw it, it literally reads nothing.
>> How do i make it start reading?
>>
>> On 2/22/2017 4:04 PM, Mike B. wrote:
>>> Hi Jed,
>>>
>>> This will explain compatibility mode.  Read all the way through.
>>>
>>>  Original Message -----
>>> *From:* Susie q <mailto:susieq2@...>
>>> Hi, when I open a document that I had created when I was using windows
>>> 2003
>>> and jaws eight, when I open the document in windows seven, and Jaws13,
>>> and
>>> word 2010, it says, part one compatibility mode, what does that mean?
>>> Thanks
>>> and when I go to each chapter in the document, it says heading level two,
>>> not used to that info, what does each mean? Thanks sue
>>>
>>>
>>> *From:* Brian Lee <mailto:brianllee@...>
>>> Hello SusieQ,
>>>
>>> Word 2010 uses Compatibility Mode to maintain compatibility with earlier
>>> versions of Word.
>>> If you get a document from a person that was created in an earlier
>>> version
>>> of Word or you open a document you created in an earlier version of
>>> Word the
>>> word "compatibility" appears in the title bar.  JAWS reads the title
>>> bar of
>>> a document when you open it and so you hear the fact that the document
>>> was
>>> created with an earlier version of Word but has been made compatible for
>>> you.  Documents created in Word 2010 are stored in an open XML format.
>>> Documents created in Word 2003 or earlier were stored in a binary
>>> format so
>>> in order to open them in Word 2010 Microsoft uses the compatibility mode.
>>> If a file has a .DOC extension it will open in compatibility mode.  Even
>>> documents with a .DOCX extension created in Word 2007 could open in
>>> compatibility mode because some of the features of Word 2010 were not
>>> supported in Word 2007 such as some text effects and OpenType typographic
>>> features).
>>>
>>> Headings in Word are styles.  A style consists of such things as the
>>> type of
>>> font, font size, font color, character spacing, etc.  A heading 1
>>> style in
>>> word 2010 uses a Cambria font size 14 and is a blue color.  The
>>> heading 2 is
>>> the same except the font is one point smaller and is a 13-point Cambria
>>> font.  The normal style in Word uses a size 11 Calibri font with a black
>>> foreground color.
>>>
>>> If each chapter in your file starts with text in a heading 2 style
>>> then you
>>> can quickly move from chapter to chapter by browsing by heading.  You can
>>> list headings by using JAWS key with function key 6, using up or down
>>> arrow
>>> to the heading to jump to and pressing enter key.  You could also
>>> choose to
>>> move between only heading 2 text by going into navigation quick keys
>>> using
>>> JAWS key with Z and then pressing the number 2 to move to next heading or
>>> shift with 2 to move to previous heading 2 in your document.  When
>>> using the
>>> navigation quick keys you are working in a read-only mode so you will
>>> need
>>> to use JAWS key with Z to return to editing mode.  You can also use
>>> function
>>> key 6 in Word 2010 and move to the Search pane.  Use the "browse by
>>> heading"
>>> tab of the pane and use tab key to the list of headings to browse.
>>> However,
>>> you will likely find it easier to use the JAWS navigation quick keys
>>> or by
>>> listing headings with JAWS key and f6.
>>>
>>> The "Part 1" text that you are hearing must be text at the top of your
>>> document indicating that you are starting with the first part of a
>>> document.
>>> You likely have Part 2 and additional parts through the document.  One
>>> part
>>> might have a few chapters in it.
>>>
>>> Take care.
>>>
>>> Brian Lee
>>> brianllee@... <mailto:brianllee@...>
> <mailto:brianllee@...>
>>> ********
>>> *From:* Brian Lee <mailto:brianllee@...>
>>> Hi Susie q,
>>>
>>> Don't confuse compatibility mode with protected view mode.  Compatibility
>>> mode just means that Word 2010 is letting you open a file from an earlier
>>> version of Word.  You can still edit the document and save it as usual.
>>> JAWS just reads the title bar when opening the document and so you
>>> hear that
>>> it is being opened in compatibility mode.  You don't have to save it
>>> in the
>>> new format.  If all you are wanting to do is transfer the edited file to
>>> your Stream then you might as well just leave it in the .DOC format.
>>>
>>> On the other hand if there are features in Word 2010 that you want to use
>>> that weren't available in the earlier versions of Word then you might
>>> want
>>> to use the newer format.  The compatibility mode is not the same as the
>>> protected mode and it is not a safety feature.  If Word thinks a document
>>> might be from an unsafe source then it will open in protected view,
>>> which is
>>> like a sandboxed area.  Documents from programs using the Internet
>>> zone are
>>> examples of documents opened in protected view.  You don't need to worry
>>> about documents opened in compatibility mode so if all you are wanting
>>> to do
>>> is put them on the Stream you really don't need to use the newer format.
>>>
>>> Take care.
>>> Brian Lee
>>> brianllee@... <mailto:brianllee@...>
> <mailto:brianllee@...>
>>> Take care.
>>> Mike
>>> Sent from my iBarstool.
>>> ----- Original Message -----
>>> *From:* Jed Barton <mailto:jed@...>
>>> *To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
> <mailto:main@jfw.groups.io>
>>> *Sent:* Wednesday, February 22, 2017 12:52 PM
>>> *Subject:* compatability mode
>>>
>>> Hey guys,
>>>
>>> OK, i am having a hhge probem reading a manual with jfw 17 and word.  It
>>> keeps telling me that a file is in compatability mode.  how do i get it
>>> out of this.  It's screwing everything up0
>>>
>>>
>>>
>>
>>
>>
>>
>
>
>



FW: Setting Tabs In A Word Document

Tom Behler
 

I’m re-sending this, since I have gotten no response so far, and am not sure it went through initially.

 

Thanks for whatever help anyone can provide.

 

See below.

 

Dr.  Tom Behler from Michigan

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Wednesday, February 22, 2017 2:46 PM
To: main@jfw.groups.io
Subject: Setting Tabs In A Word Document

 

Hello, everyone.

 

I  know I have done this before, but I’m  having trouble remembering how to set tabbs in a Microsoft Word document.

 

I am trying to create a report form for a project I’m working on, and want to set three or four tabs for each line on the form.

 

I am using Word 2016 here, with Windows 7.

 

Thanks for any memory jogs anyone can provide.

 

Dr.  Tom Behler from Michigan

 


Re: compatability mode

Jed Barton
 

If anyone wants to see if they can get this file to read, my email is
jed@jedbarton.com
I'll send you the file. I'm having horrible luck. This is not good, as this is the simplest text file, and i just need to get some info out of it, but i can't make jfw read it.

On 2/22/2017 4:51 PM, Mike B. wrote:
Hi Jed,

Can you select all the text, copy it to the clipboard, & paste it into
a text file, or a new Word document? If the document isn't of some
private nature, send it to me off list, & I'll see if I can extract the
contents from it, & send it back to you.
Take care.
Mike
Sent from my iBarstool.
----- Original Message -----
*From:* Jed Barton <mailto:jed@jedbarton.com>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:* Wednesday, February 22, 2017 1:24 PM
*Subject:* Re: compatability mode

Something is major wrong ehre guys. I finaly got word to shut down.
Then i clicked on the file again, but i can see no text. Is there any
way to get around this? It's really annoying. I've already wasted 45
minutes on this. All i wanna do is read this document. Any ideas on
what to do? When i do control home, it just says top of file. It
almost sounds like something is blocking jfw from reading it. Any ideas?

On 2/22/2017 4:21 PM, Jed Barton wrote:
What i don't understand, why itkeeps hosing my computer. The document,
i only got it to work once.
When i tab or arrow throw it, it literally reads nothing.
How do i make it start reading?

On 2/22/2017 4:04 PM, Mike B. wrote:
Hi Jed,

This will explain compatibility mode. Read all the way through.

Original Message -----
*From:* Susie q <mailto:susieq2@cogeco.ca>
Hi, when I open a document that I had created when I was using windows
2003
and jaws eight, when I open the document in windows seven, and Jaws13,
and
word 2010, it says, part one compatibility mode, what does that mean?
Thanks
and when I go to each chapter in the document, it says heading level two,
not used to that info, what does each mean? Thanks sue


*From:* Brian Lee <mailto:brianllee@charter.net>
Hello SusieQ,

Word 2010 uses Compatibility Mode to maintain compatibility with earlier
versions of Word.
If you get a document from a person that was created in an earlier
version
of Word or you open a document you created in an earlier version of
Word the
word "compatibility" appears in the title bar. JAWS reads the title
bar of
a document when you open it and so you hear the fact that the document
was
created with an earlier version of Word but has been made compatible for
you. Documents created in Word 2010 are stored in an open XML format.
Documents created in Word 2003 or earlier were stored in a binary
format so
in order to open them in Word 2010 Microsoft uses the compatibility mode.
If a file has a .DOC extension it will open in compatibility mode. Even
documents with a .DOCX extension created in Word 2007 could open in
compatibility mode because some of the features of Word 2010 were not
supported in Word 2007 such as some text effects and OpenType typographic
features).

Headings in Word are styles. A style consists of such things as the
type of
font, font size, font color, character spacing, etc. A heading 1
style in
word 2010 uses a Cambria font size 14 and is a blue color. The
heading 2 is
the same except the font is one point smaller and is a 13-point Cambria
font. The normal style in Word uses a size 11 Calibri font with a black
foreground color.

If each chapter in your file starts with text in a heading 2 style
then you
can quickly move from chapter to chapter by browsing by heading. You can
list headings by using JAWS key with function key 6, using up or down
arrow
to the heading to jump to and pressing enter key. You could also
choose to
move between only heading 2 text by going into navigation quick keys
using
JAWS key with Z and then pressing the number 2 to move to next heading or
shift with 2 to move to previous heading 2 in your document. When
using the
navigation quick keys you are working in a read-only mode so you will
need
to use JAWS key with Z to return to editing mode. You can also use
function
key 6 in Word 2010 and move to the Search pane. Use the "browse by
heading"
tab of the pane and use tab key to the list of headings to browse.
However,
you will likely find it easier to use the JAWS navigation quick keys
or by
listing headings with JAWS key and f6.

The "Part 1" text that you are hearing must be text at the top of your
document indicating that you are starting with the first part of a
document.
You likely have Part 2 and additional parts through the document. One
part
might have a few chapters in it.

Take care.

Brian Lee
brianllee@charter.net <mailto:brianllee@charter.net>
<mailto:brianllee@charter.net>
********
*From:* Brian Lee <mailto:brianllee@charter.net>
Hi Susie q,

Don't confuse compatibility mode with protected view mode. Compatibility
mode just means that Word 2010 is letting you open a file from an earlier
version of Word. You can still edit the document and save it as usual.
JAWS just reads the title bar when opening the document and so you
hear that
it is being opened in compatibility mode. You don't have to save it
in the
new format. If all you are wanting to do is transfer the edited file to
your Stream then you might as well just leave it in the .DOC format.

On the other hand if there are features in Word 2010 that you want to use
that weren't available in the earlier versions of Word then you might
want
to use the newer format. The compatibility mode is not the same as the
protected mode and it is not a safety feature. If Word thinks a document
might be from an unsafe source then it will open in protected view,
which is
like a sandboxed area. Documents from programs using the Internet
zone are
examples of documents opened in protected view. You don't need to worry
about documents opened in compatibility mode so if all you are wanting
to do
is put them on the Stream you really don't need to use the newer format.

Take care.
Brian Lee
brianllee@charter.net <mailto:brianllee@charter.net>
<mailto:brianllee@charter.net>
Take care.
Mike
Sent from my iBarstool.
----- Original Message -----
*From:* Jed Barton <mailto:jed@jedbarton.com>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<mailto:main@jfw.groups.io>
*Sent:* Wednesday, February 22, 2017 12:52 PM
*Subject:* compatability mode

Hey guys,

OK, i am having a hhge probem reading a manual with jfw 17 and word. It
keeps telling me that a file is in compatability mode. how do i get it
out of this. It's screwing everything up0






copying from Wells Fargo "results" web page.

Curtis Delzer
 

My wife uses jaws 18 and before she could just copy the results of the
bill pay page after the transactions to the clipboard and paste into
notepad or word, but now, it does not work for her.
Is there a setting in JFW which has changed it's default between 17 and
18, or, is the update to the Wells Fargo web site screwing it up for her?
When she copies to the clipboard, and attempts to paste, nothing gets
carried over into the paste action, and after a while, the web page
times out for security reasons.
Anyone have ideas as to what could be happening?
She is not a member of this list so any results anyone comes up with
I'll forward to her.
THANK YOU ALL!

-----
Curtis Delzer, HS.
K6VFO
San Bernardino, CA


Re: compatability mode

Jed Barton
 

I have no idea.
I can't even get it to open in word pad. It just dings at me when i arrow around. My god, this should not be this complicated.
I've already spent close to 2 hours fighting with this.
What's your email

On 2/22/2017 4:51 PM, Mike B. wrote:
Hi Jed,

Can you select all the text, copy it to the clipboard, & paste it into
a text file, or a new Word document? If the document isn't of some
private nature, send it to me off list, & I'll see if I can extract the
contents from it, & send it back to you.
Take care.
Mike
Sent from my iBarstool.
----- Original Message -----
*From:* Jed Barton <mailto:jed@jedbarton.com>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:* Wednesday, February 22, 2017 1:24 PM
*Subject:* Re: compatability mode

Something is major wrong ehre guys. I finaly got word to shut down.
Then i clicked on the file again, but i can see no text. Is there any
way to get around this? It's really annoying. I've already wasted 45
minutes on this. All i wanna do is read this document. Any ideas on
what to do? When i do control home, it just says top of file. It
almost sounds like something is blocking jfw from reading it. Any ideas?

On 2/22/2017 4:21 PM, Jed Barton wrote:
What i don't understand, why itkeeps hosing my computer. The document,
i only got it to work once.
When i tab or arrow throw it, it literally reads nothing.
How do i make it start reading?

On 2/22/2017 4:04 PM, Mike B. wrote:
Hi Jed,

This will explain compatibility mode. Read all the way through.

Original Message -----
*From:* Susie q <mailto:susieq2@cogeco.ca>
Hi, when I open a document that I had created when I was using windows
2003
and jaws eight, when I open the document in windows seven, and Jaws13,
and
word 2010, it says, part one compatibility mode, what does that mean?
Thanks
and when I go to each chapter in the document, it says heading level two,
not used to that info, what does each mean? Thanks sue


*From:* Brian Lee <mailto:brianllee@charter.net>
Hello SusieQ,

Word 2010 uses Compatibility Mode to maintain compatibility with earlier
versions of Word.
If you get a document from a person that was created in an earlier
version
of Word or you open a document you created in an earlier version of
Word the
word "compatibility" appears in the title bar. JAWS reads the title
bar of
a document when you open it and so you hear the fact that the document
was
created with an earlier version of Word but has been made compatible for
you. Documents created in Word 2010 are stored in an open XML format.
Documents created in Word 2003 or earlier were stored in a binary
format so
in order to open them in Word 2010 Microsoft uses the compatibility mode.
If a file has a .DOC extension it will open in compatibility mode. Even
documents with a .DOCX extension created in Word 2007 could open in
compatibility mode because some of the features of Word 2010 were not
supported in Word 2007 such as some text effects and OpenType typographic
features).

Headings in Word are styles. A style consists of such things as the
type of
font, font size, font color, character spacing, etc. A heading 1
style in
word 2010 uses a Cambria font size 14 and is a blue color. The
heading 2 is
the same except the font is one point smaller and is a 13-point Cambria
font. The normal style in Word uses a size 11 Calibri font with a black
foreground color.

If each chapter in your file starts with text in a heading 2 style
then you
can quickly move from chapter to chapter by browsing by heading. You can
list headings by using JAWS key with function key 6, using up or down
arrow
to the heading to jump to and pressing enter key. You could also
choose to
move between only heading 2 text by going into navigation quick keys
using
JAWS key with Z and then pressing the number 2 to move to next heading or
shift with 2 to move to previous heading 2 in your document. When
using the
navigation quick keys you are working in a read-only mode so you will
need
to use JAWS key with Z to return to editing mode. You can also use
function
key 6 in Word 2010 and move to the Search pane. Use the "browse by
heading"
tab of the pane and use tab key to the list of headings to browse.
However,
you will likely find it easier to use the JAWS navigation quick keys
or by
listing headings with JAWS key and f6.

The "Part 1" text that you are hearing must be text at the top of your
document indicating that you are starting with the first part of a
document.
You likely have Part 2 and additional parts through the document. One
part
might have a few chapters in it.

Take care.

Brian Lee
brianllee@charter.net <mailto:brianllee@charter.net>
<mailto:brianllee@charter.net>
********
*From:* Brian Lee <mailto:brianllee@charter.net>
Hi Susie q,

Don't confuse compatibility mode with protected view mode. Compatibility
mode just means that Word 2010 is letting you open a file from an earlier
version of Word. You can still edit the document and save it as usual.
JAWS just reads the title bar when opening the document and so you
hear that
it is being opened in compatibility mode. You don't have to save it
in the
new format. If all you are wanting to do is transfer the edited file to
your Stream then you might as well just leave it in the .DOC format.

On the other hand if there are features in Word 2010 that you want to use
that weren't available in the earlier versions of Word then you might
want
to use the newer format. The compatibility mode is not the same as the
protected mode and it is not a safety feature. If Word thinks a document
might be from an unsafe source then it will open in protected view,
which is
like a sandboxed area. Documents from programs using the Internet
zone are
examples of documents opened in protected view. You don't need to worry
about documents opened in compatibility mode so if all you are wanting
to do
is put them on the Stream you really don't need to use the newer format.

Take care.
Brian Lee
brianllee@charter.net <mailto:brianllee@charter.net>
<mailto:brianllee@charter.net>
Take care.
Mike
Sent from my iBarstool.
----- Original Message -----
*From:* Jed Barton <mailto:jed@jedbarton.com>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<mailto:main@jfw.groups.io>
*Sent:* Wednesday, February 22, 2017 12:52 PM
*Subject:* compatability mode

Hey guys,

OK, i am having a hhge probem reading a manual with jfw 17 and word. It
keeps telling me that a file is in compatability mode. how do i get it
out of this. It's screwing everything up0






Re: compatability mode

Mike B. <mb69mach1@...>
 


Hi Jed,
 
Can you select all the text, copy it to the clipboard,  & paste it into a text file, or a new Word document?  If the document isn't of some private nature, send it to me off list, & I'll see if I can extract the contents from it, & send it back to you.
Take care.
Mike
Sent from my iBarstool.

----- Original Message -----
From: Jed Barton
Sent: Wednesday, February 22, 2017 1:24 PM
Subject: Re: compatability mode

Something is major wrong ehre guys.  I finaly got word to shut down.
Then i clicked on the file again, but i can see no text.  Is there any
way to get around this?  It's really annoying.  I've already wasted 45
minutes on this.  All i wanna do is read this document.  Any ideas on
what to do?  When i do control home, it just says top of file.  It
almost sounds like something is blocking jfw from reading it.  Any ideas?

On 2/22/2017 4:21 PM, Jed Barton wrote:
> What i don't understand, why itkeeps hosing my computer.  The document,
> i only got it to work once.
> When i tab or arrow throw it, it literally reads nothing.
> How do i make it start reading?
>
> On 2/22/2017 4:04 PM, Mike B. wrote:
>> Hi Jed,
>>
>> This will explain compatibility mode.  Read all the way through.
>>
>>  Original Message -----
>> *From:* Susie q <mailto:susieq2@...>
>> Hi, when I open a document that I had created when I was using windows
>> 2003
>> and jaws eight, when I open the document in windows seven, and Jaws13,
>> and
>> word 2010, it says, part one compatibility mode, what does that mean?
>> Thanks
>> and when I go to each chapter in the document, it says heading level two,
>> not used to that info, what does each mean? Thanks sue
>>
>>
>> *From:* Brian Lee <mailto:brianllee@...>
>> Hello SusieQ,
>>
>> Word 2010 uses Compatibility Mode to maintain compatibility with earlier
>> versions of Word.
>> If you get a document from a person that was created in an earlier
>> version
>> of Word or you open a document you created in an earlier version of
>> Word the
>> word "compatibility" appears in the title bar.  JAWS reads the title
>> bar of
>> a document when you open it and so you hear the fact that the document
>> was
>> created with an earlier version of Word but has been made compatible for
>> you.  Documents created in Word 2010 are stored in an open XML format.
>> Documents created in Word 2003 or earlier were stored in a binary
>> format so
>> in order to open them in Word 2010 Microsoft uses the compatibility mode.
>> If a file has a .DOC extension it will open in compatibility mode.  Even
>> documents with a .DOCX extension created in Word 2007 could open in
>> compatibility mode because some of the features of Word 2010 were not
>> supported in Word 2007 such as some text effects and OpenType typographic
>> features).
>>
>> Headings in Word are styles.  A style consists of such things as the
>> type of
>> font, font size, font color, character spacing, etc.  A heading 1
>> style in
>> word 2010 uses a Cambria font size 14 and is a blue color.  The
>> heading 2 is
>> the same except the font is one point smaller and is a 13-point Cambria
>> font.  The normal style in Word uses a size 11 Calibri font with a black
>> foreground color.
>>
>> If each chapter in your file starts with text in a heading 2 style
>> then you
>> can quickly move from chapter to chapter by browsing by heading.  You can
>> list headings by using JAWS key with function key 6, using up or down
>> arrow
>> to the heading to jump to and pressing enter key.  You could also
>> choose to
>> move between only heading 2 text by going into navigation quick keys
>> using
>> JAWS key with Z and then pressing the number 2 to move to next heading or
>> shift with 2 to move to previous heading 2 in your document.  When
>> using the
>> navigation quick keys you are working in a read-only mode so you will
>> need
>> to use JAWS key with Z to return to editing mode.  You can also use
>> function
>> key 6 in Word 2010 and move to the Search pane.  Use the "browse by
>> heading"
>> tab of the pane and use tab key to the list of headings to browse.
>> However,
>> you will likely find it easier to use the JAWS navigation quick keys
>> or by
>> listing headings with JAWS key and f6.
>>
>> The "Part 1" text that you are hearing must be text at the top of your
>> document indicating that you are starting with the first part of a
>> document.
>> You likely have Part 2 and additional parts through the document.  One
>> part
>> might have a few chapters in it.
>>
>> Take care.
>>
>> Brian Lee
>> brianllee@... <mailto:brianllee@...>
>> ********
>> *From:* Brian Lee <mailto:brianllee@...>
>> Hi Susie q,
>>
>> Don't confuse compatibility mode with protected view mode.  Compatibility
>> mode just means that Word 2010 is letting you open a file from an earlier
>> version of Word.  You can still edit the document and save it as usual.
>> JAWS just reads the title bar when opening the document and so you
>> hear that
>> it is being opened in compatibility mode.  You don't have to save it
>> in the
>> new format.  If all you are wanting to do is transfer the edited file to
>> your Stream then you might as well just leave it in the .DOC format.
>>
>> On the other hand if there are features in Word 2010 that you want to use
>> that weren't available in the earlier versions of Word then you might
>> want
>> to use the newer format.  The compatibility mode is not the same as the
>> protected mode and it is not a safety feature.  If Word thinks a document
>> might be from an unsafe source then it will open in protected view,
>> which is
>> like a sandboxed area.  Documents from programs using the Internet
>> zone are
>> examples of documents opened in protected view.  You don't need to worry
>> about documents opened in compatibility mode so if all you are wanting
>> to do
>> is put them on the Stream you really don't need to use the newer format.
>>
>> Take care.
>> Brian Lee
>> brianllee@... <mailto:brianllee@...>
>> Take care.
>> Mike
>> Sent from my iBarstool.
>> ----- Original Message -----
>> *From:* Jed Barton <mailto:jed@...>
>> *To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
>> *Sent:* Wednesday, February 22, 2017 12:52 PM
>> *Subject:* compatability mode
>>
>> Hey guys,
>>
>> OK, i am having a hhge probem reading a manual with jfw 17 and word.  It
>> keeps telling me that a file is in compatability mode.  how do i get it
>> out of this.  It's screwing everything up0
>>
>>
>>
>
>
>
>



Re: compatability mode

Jed Barton
 

Something is major wrong ehre guys. I finaly got word to shut down.
Then i clicked on the file again, but i can see no text. Is there any way to get around this? It's really annoying. I've already wasted 45 minutes on this. All i wanna do is read this document. Any ideas on what to do? When i do control home, it just says top of file. It almost sounds like something is blocking jfw from reading it. Any ideas?

On 2/22/2017 4:21 PM, Jed Barton wrote:
What i don't understand, why itkeeps hosing my computer. The document,
i only got it to work once.
When i tab or arrow throw it, it literally reads nothing.
How do i make it start reading?

On 2/22/2017 4:04 PM, Mike B. wrote:
Hi Jed,

This will explain compatibility mode. Read all the way through.

Original Message -----
*From:* Susie q <mailto:susieq2@cogeco.ca>
Hi, when I open a document that I had created when I was using windows
2003
and jaws eight, when I open the document in windows seven, and Jaws13,
and
word 2010, it says, part one compatibility mode, what does that mean?
Thanks
and when I go to each chapter in the document, it says heading level two,
not used to that info, what does each mean? Thanks sue


*From:* Brian Lee <mailto:brianllee@charter.net>
Hello SusieQ,

Word 2010 uses Compatibility Mode to maintain compatibility with earlier
versions of Word.
If you get a document from a person that was created in an earlier
version
of Word or you open a document you created in an earlier version of
Word the
word "compatibility" appears in the title bar. JAWS reads the title
bar of
a document when you open it and so you hear the fact that the document
was
created with an earlier version of Word but has been made compatible for
you. Documents created in Word 2010 are stored in an open XML format.
Documents created in Word 2003 or earlier were stored in a binary
format so
in order to open them in Word 2010 Microsoft uses the compatibility mode.
If a file has a .DOC extension it will open in compatibility mode. Even
documents with a .DOCX extension created in Word 2007 could open in
compatibility mode because some of the features of Word 2010 were not
supported in Word 2007 such as some text effects and OpenType typographic
features).

Headings in Word are styles. A style consists of such things as the
type of
font, font size, font color, character spacing, etc. A heading 1
style in
word 2010 uses a Cambria font size 14 and is a blue color. The
heading 2 is
the same except the font is one point smaller and is a 13-point Cambria
font. The normal style in Word uses a size 11 Calibri font with a black
foreground color.

If each chapter in your file starts with text in a heading 2 style
then you
can quickly move from chapter to chapter by browsing by heading. You can
list headings by using JAWS key with function key 6, using up or down
arrow
to the heading to jump to and pressing enter key. You could also
choose to
move between only heading 2 text by going into navigation quick keys
using
JAWS key with Z and then pressing the number 2 to move to next heading or
shift with 2 to move to previous heading 2 in your document. When
using the
navigation quick keys you are working in a read-only mode so you will
need
to use JAWS key with Z to return to editing mode. You can also use
function
key 6 in Word 2010 and move to the Search pane. Use the "browse by
heading"
tab of the pane and use tab key to the list of headings to browse.
However,
you will likely find it easier to use the JAWS navigation quick keys
or by
listing headings with JAWS key and f6.

The "Part 1" text that you are hearing must be text at the top of your
document indicating that you are starting with the first part of a
document.
You likely have Part 2 and additional parts through the document. One
part
might have a few chapters in it.

Take care.

Brian Lee
brianllee@charter.net <mailto:brianllee@charter.net>
********
*From:* Brian Lee <mailto:brianllee@charter.net>
Hi Susie q,

Don't confuse compatibility mode with protected view mode. Compatibility
mode just means that Word 2010 is letting you open a file from an earlier
version of Word. You can still edit the document and save it as usual.
JAWS just reads the title bar when opening the document and so you
hear that
it is being opened in compatibility mode. You don't have to save it
in the
new format. If all you are wanting to do is transfer the edited file to
your Stream then you might as well just leave it in the .DOC format.

On the other hand if there are features in Word 2010 that you want to use
that weren't available in the earlier versions of Word then you might
want
to use the newer format. The compatibility mode is not the same as the
protected mode and it is not a safety feature. If Word thinks a document
might be from an unsafe source then it will open in protected view,
which is
like a sandboxed area. Documents from programs using the Internet
zone are
examples of documents opened in protected view. You don't need to worry
about documents opened in compatibility mode so if all you are wanting
to do
is put them on the Stream you really don't need to use the newer format.

Take care.
Brian Lee
brianllee@charter.net <mailto:brianllee@charter.net>
Take care.
Mike
Sent from my iBarstool.
----- Original Message -----
*From:* Jed Barton <mailto:jed@jedbarton.com>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:* Wednesday, February 22, 2017 12:52 PM
*Subject:* compatability mode

Hey guys,

OK, i am having a hhge probem reading a manual with jfw 17 and word. It
keeps telling me that a file is in compatability mode. how do i get it
out of this. It's screwing everything up0




Re: compatability mode

Jed Barton
 

What i don't understand, why itkeeps hosing my computer. The document, i only got it to work once.
When i tab or arrow throw it, it literally reads nothing.
How do i make it start reading?

On 2/22/2017 4:04 PM, Mike B. wrote:
Hi Jed,

This will explain compatibility mode. Read all the way through.

Original Message -----
*From:* Susie q <mailto:susieq2@cogeco.ca>
Hi, when I open a document that I had created when I was using windows 2003
and jaws eight, when I open the document in windows seven, and Jaws13, and
word 2010, it says, part one compatibility mode, what does that mean? Thanks
and when I go to each chapter in the document, it says heading level two,
not used to that info, what does each mean? Thanks sue


*From:* Brian Lee <mailto:brianllee@charter.net>
Hello SusieQ,

Word 2010 uses Compatibility Mode to maintain compatibility with earlier
versions of Word.
If you get a document from a person that was created in an earlier version
of Word or you open a document you created in an earlier version of Word the
word "compatibility" appears in the title bar. JAWS reads the title bar of
a document when you open it and so you hear the fact that the document was
created with an earlier version of Word but has been made compatible for
you. Documents created in Word 2010 are stored in an open XML format.
Documents created in Word 2003 or earlier were stored in a binary format so
in order to open them in Word 2010 Microsoft uses the compatibility mode.
If a file has a .DOC extension it will open in compatibility mode. Even
documents with a .DOCX extension created in Word 2007 could open in
compatibility mode because some of the features of Word 2010 were not
supported in Word 2007 such as some text effects and OpenType typographic
features).

Headings in Word are styles. A style consists of such things as the type of
font, font size, font color, character spacing, etc. A heading 1 style in
word 2010 uses a Cambria font size 14 and is a blue color. The heading 2 is
the same except the font is one point smaller and is a 13-point Cambria
font. The normal style in Word uses a size 11 Calibri font with a black
foreground color.

If each chapter in your file starts with text in a heading 2 style then you
can quickly move from chapter to chapter by browsing by heading. You can
list headings by using JAWS key with function key 6, using up or down arrow
to the heading to jump to and pressing enter key. You could also choose to
move between only heading 2 text by going into navigation quick keys using
JAWS key with Z and then pressing the number 2 to move to next heading or
shift with 2 to move to previous heading 2 in your document. When using the
navigation quick keys you are working in a read-only mode so you will need
to use JAWS key with Z to return to editing mode. You can also use function
key 6 in Word 2010 and move to the Search pane. Use the "browse by heading"
tab of the pane and use tab key to the list of headings to browse. However,
you will likely find it easier to use the JAWS navigation quick keys or by
listing headings with JAWS key and f6.

The "Part 1" text that you are hearing must be text at the top of your
document indicating that you are starting with the first part of a document.
You likely have Part 2 and additional parts through the document. One part
might have a few chapters in it.

Take care.

Brian Lee
brianllee@charter.net <mailto:brianllee@charter.net>
********
*From:* Brian Lee <mailto:brianllee@charter.net>
Hi Susie q,

Don't confuse compatibility mode with protected view mode. Compatibility
mode just means that Word 2010 is letting you open a file from an earlier
version of Word. You can still edit the document and save it as usual.
JAWS just reads the title bar when opening the document and so you hear that
it is being opened in compatibility mode. You don't have to save it in the
new format. If all you are wanting to do is transfer the edited file to
your Stream then you might as well just leave it in the .DOC format.

On the other hand if there are features in Word 2010 that you want to use
that weren't available in the earlier versions of Word then you might want
to use the newer format. The compatibility mode is not the same as the
protected mode and it is not a safety feature. If Word thinks a document
might be from an unsafe source then it will open in protected view, which is
like a sandboxed area. Documents from programs using the Internet zone are
examples of documents opened in protected view. You don't need to worry
about documents opened in compatibility mode so if all you are wanting to do
is put them on the Stream you really don't need to use the newer format.

Take care.
Brian Lee
brianllee@charter.net <mailto:brianllee@charter.net>
Take care.
Mike
Sent from my iBarstool.
----- Original Message -----
*From:* Jed Barton <mailto:jed@jedbarton.com>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:* Wednesday, February 22, 2017 12:52 PM
*Subject:* compatability mode

Hey guys,

OK, i am having a hhge probem reading a manual with jfw 17 and word. It
keeps telling me that a file is in compatability mode. how do i get it
out of this. It's screwing everything up0



major compatability mode problem

Jed Barton
 

Hey guys,

OK, this is not good at all. I am trying o open up a document, and it keeps putting me in to compatability mode, and is hosing my computer. I can not close this document at all. I've tried alt f4, nothing, alt shift f4, nothing.. Any ideas?


Re: compatability mode

Mike B. <mb69mach1@...>
 


Hi Jed,
 
This will explain compatibility mode.  Read all the way through.
 
 Original Message -----
From: Susie q
Hi, when I open a document that I had created when I was using windows 2003
and jaws eight, when I open the document in windows seven, and Jaws13, and
word 2010, it says, part one compatibility mode, what does that mean? Thanks
and when I go to each chapter in the document, it says heading level two,
not used to that info, what does each mean? Thanks sue

 
From: Brian Lee
Hello SusieQ,

Word 2010 uses Compatibility Mode to maintain compatibility with earlier
versions of Word.
If you get a document from a person that was created in an earlier version
of Word or you open a document you created in an earlier version of Word the
word "compatibility" appears in the title bar.  JAWS reads the title bar of
a document when you open it and so you hear the fact that the document was
created with an earlier version of Word but has been made compatible for
you.  Documents created in Word 2010 are stored in an open XML format.
Documents created in Word 2003 or earlier were stored in a binary format so
in order to open them in Word 2010 Microsoft uses the compatibility mode.
If a file has a .DOC extension it will open in compatibility mode.  Even
documents with a .DOCX extension created in Word 2007 could open in
compatibility mode because some of the features of Word 2010 were not
supported in Word 2007 such as some text effects and OpenType typographic
features).

Headings in Word are styles.  A style consists of such things as the type of
font, font size, font color, character spacing, etc.  A heading 1 style in
word 2010 uses a Cambria font size 14 and is a blue color.  The heading 2 is
the same except the font is one point smaller and is a 13-point Cambria
font.  The normal style in Word uses a size 11 Calibri font with a black
foreground color.

If each chapter in your file starts with text in a heading 2 style then you
can quickly move from chapter to chapter by browsing by heading.  You can
list headings by using JAWS key with function key 6, using up or down arrow
to the heading to jump to and pressing enter key.  You could also choose to
move between only heading 2 text by going into navigation quick keys using
JAWS key with Z and then pressing the number 2 to move to next heading or
shift with 2 to move to previous heading 2 in your document.  When using the
navigation quick keys you are working in a read-only mode so you will need
to use JAWS key with Z to return to editing mode.  You can also use function
key 6 in Word 2010 and move to the Search pane.  Use the "browse by heading"
tab of the pane and use tab key to the list of headings to browse.  However,
you will likely find it easier to use the JAWS navigation quick keys or by
listing headings with JAWS key and f6.

The "Part 1" text that you are hearing must be text at the top of your
document indicating that you are starting with the first part of a document.
You likely have Part 2 and additional parts through the document.  One part
might have a few chapters in it. 

Take care.

Brian Lee
brianllee@...

From: Brian Lee
Hi Susie q,

Don't confuse compatibility mode with protected view mode.  Compatibility
mode just means that Word 2010 is letting you open a file from an earlier
version of Word.  You can still edit the document and save it as usual.
JAWS just reads the title bar when opening the document and so you hear that
it is being opened in compatibility mode.  You don't have to save it in the
new format.  If all you are wanting to do is transfer the edited file to
your Stream then you might as well just leave it in the .DOC format. 

On the other hand if there are features in Word 2010 that you want to use
that weren't available in the earlier versions of Word then you might want
to use the newer format.  The compatibility mode is not the same as the
protected mode and it is not a safety feature.  If Word thinks a document
might be from an unsafe source then it will open in protected view, which is
like a sandboxed area.  Documents from programs using the Internet zone are
examples of documents opened in protected view.  You don't need to worry
about documents opened in compatibility mode so if all you are wanting to do
is put them on the Stream you really don't need to use the newer format. 

Take care.
Brian Lee
brianllee@...
Take care.
Mike
Sent from my iBarstool.

----- Original Message -----
From: Jed Barton
Sent: Wednesday, February 22, 2017 12:52 PM
Subject: compatability mode

Hey guys,

OK, i am having a hhge probem reading a manual with jfw 17 and word.  It
keeps telling me that a file is in compatability mode.  how do i get it
out of this.  It's screwing everything up0



compatability mode

Jed Barton
 

Hey guys,

OK, i am having a hhge probem reading a manual with jfw 17 and word. It keeps telling me that a file is in compatability mode. how do i get it out of this. It's screwing everything up0


Re: Setting Tabs In A Word Document

Lisle, Ted (CHFS DMS)
 

First, I  understand your question.  At first glance, 2015 doesn‘t seem as intuitive as versions once were.  I’d begin by concentrating on the layout tab.  You need to know the kind of tab you’re setting.  It also won’t hurt to know spaces per inch in the font you’re using.  I think the default tab is five spaces, but these aren’t your father’s fonts.

 

Ted

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Wednesday, February 22, 2017 2:46 PM
To: main@jfw.groups.io
Subject: Setting Tabs In A Word Document

 

Hello, everyone.

 

I  know I have done this before, but I’m  having trouble remembering how to set tabs in a Microsoft Word document.

 

I am trying to create a report form for a project I’m working on, and want to set three or four tabs for each line on the form.

 

I am using Word 2016 here, with Windows 7.

 

Thanks for any memory jogs anyone can provide.

 

Dr.  Tom Behler from Michigan

 


Setting Tabs In A Word Document

Tom Behler
 

Hello, everyone.

 

I  know I have done this before, but I’m  having trouble remembering how to set tabbs in a Microsoft Word document.

 

I am trying to create a report form for a project I’m working on, and want to set three or four tabs for each line on the form.

 

I am using Word 2016 here, with Windows 7.

 

Thanks for any memory jogs anyone can provide.

 

Dr.  Tom Behler from Michigan

 


win mail taking forever to load messages

marvin hunkin <startrekcafe@...>
 

Hi. Use yahoo mail and two gmail accounts. Notice, my e-mailsare taking forever to load. Why. Using windows 10 64 bit and have a fast internet connection. Any one had this issue and how to fix. Using windows 10 64 bit pro, jaws 18. And got the latest1607 updates. Marvin.              

 

Sent from Mail for Windows 10

 


Re: outlook16 tree view

Palmer Loux <Plmrlx@...>
 

Ok I will tell my jaws client I have outlook 2013 and have not had this issue and thx Carolyn u are rockin it Lady!!

Sent from my iPhone

On Feb 20, 2017, at 6:32 PM, "Carolyn Arnold" <4carolyna@windstream.net> wrote:

I just tried Control-Y-S, got Stuff a box of mine, and Sent,
and it told me how many were in there. I did not enter it,
wanted to get back to JFW here.

Bye for now,

Carolyn


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On
Behalf Of Palmer Loux
Sent: Monday, February 20, 2017 3:01 PM
To: main@jfw.groups.io
Subject: Re: outlook16 tree view

It is lioke the sent folder has disappeared from the Folder
List view that you get when you press contrl Y All the
others are there, not the sent items folder

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On
Behalf Of Carolyn Arnold
Sent: Sunday, February 19, 2017 6:33 PM
To: main@jfw.groups.io
Subject: Re: outlook16 tree view

Sometimes in Outlook 2013, I try to get into my Sent Folder,
and it will say zero messages, so I exit Outlook, come back,
voila, there they are just like magic, maybe I should have
said abra cadabra.

Bye for now,

Carolyn


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On
Behalf Of Palmer Loux
Sent: Sunday, February 19, 2017 5:22 PM
To: main@jfw.groups.io
Subject: Re: outlook16 tree view

My client is trying to use Outlook 2016 and when he does
,control y or brings up folders we do not see the sent
folder at all in the list Everything else but no sent folder

Sent from my iPhone

On Feb 19, 2017, at 1:45 PM, "Bonnie Vegiard"
<bonnievegiard@gmail.com> wrote:

I am finding that outlook 2016 freezes up on me when I
tried to get to
folders in my Treeview. Is anyone else having this
experience? The
folders I'm trying to get to our folders I have saved
under my Gmail
account. Thanks, Bonni

On Feb 18, 2017, at 1:15 AM, thomas williams
<twilliams16@triad.rr.com> wrote:

Thanks! You.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On
Behalf Of
Jason White via Groups.Io
Sent: Friday, February 17, 2017 6:14 PM
To: main@jfw.groups.io
Subject: Re: outlook16 tree view

thomas williams <twilliams16@triad.rr.com> wrote:
Using outlook16 how do you get to the tree view?
Shift+F6 from the list of messages, or ctrl+y to change
folders using
Shift+a
different interface.














Re: How do you move a "slider" for elapsed time for a YouTube video?

Poppa Bear <heavens4real@...>
 

That is what I was thinking, LOL. Thanks for the link.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Gerry Ellis
Sent: Tuesday, February 21, 2017 2:58 PM
To: main@jfw.groups.io
Subject: Re: How do you move a "slider" for elapsed time for a YouTube video?

 

Hi,

 

 

www.dlee.org

 

 

 

Take care,

 

Gerry Ellis

 

If you don’t know where you’re going,

How will you know when you get there?

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Poppa Bear
Sent: Tuesday, February 21, 2017 11:21 PM
To: main@jfw.groups.io
Subject: Re: How do you move a "slider" for elapsed time for a YouTube video?

 

Sorry if I missed, but where are these scripts?

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard B. McDonald
Sent: Sunday, February 19, 2017 6:59 AM
To: main@jfw.groups.io
Subject: Re: How do you move a "slider" for elapsed time for a YouTube video?

 

WOW, thanks!  This is very helpful!

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of HH. Smith Jr.
Sent: Friday, February 17, 2017 6:32 PM
To: main@jfw.groups.io
Subject: Re: How do you move a "slider" for elapsed time for a YouTube video?

 

Richard,

 

Here are the detailed instructions and key strokes for the YouTube scripts.

 

Using YouTube With JAWS and the Scripts

 

The scripts provide the following commands:

Ctrl+Shift+S Skip Ad. If a video ad is playing and a Skip button is present, this command will click it to make YouTube start playing the actual video requested.

Ctrl+Shift+Space Press the Play/Pause button if present. This works in both virtual cursor mode and forms mode.

Ctrl+Shift+T Say Time. This command will speak the current time position in the playing video as well as the video's length. If a video ad is playing, the times will relate to the ad rather than to the requested video. Note: The current time position is not always kept up to date by YouTube itself but will be updated if the video is paused and restarted or the play position is changed by the user.

Typing Ctrl+Shift+Space twice will force such an update.

Ctrl+Shift+N and Ctrl+Shift+P Move to the next or previous search results page or video. This works in search results, playlists, and wherever a Next and Previous button can be found.

Ctrl+Shift+V Move focus to the volume slider for the currently playing video. This also switches JAWS into forms mode and causes a number of native YouTube keystrokes to become usable.

The following YouTube-native keystrokes work as indicated when JAWS is in forms mode or if the keystrokes are passed through JAWS directly to YouTube, such as with the JAWS "pass next key through" command, Ins+3. As noted in the below list, some YouTube keystrokes require focus to be on the video's volume slider. This list applies at least to the HTML 5 video player and possibly also to the Flash player.

Space (slider focus required) or K Pause, resume, or play the current video. j or l Rewind or fast-forward the video by a few seconds. Digits 1 through 9 and 0 (slider focus required) Jump to a percentage through the video. 0 jumps to the beginning, 1 to 10% through, 2 to 20% through, etc., and 9 to 90% through. , (comma) or . (period) Slow down or speed up the video without changing its pitch. This amounts to simple compression or expansion of the audio and video. Slowing down far enough may stop playback. Up or Down arrows (slider focus required) Turn up or down the volume of the video by increments of 5%. Right and Left arrows, respectively, perform the same actions and also require focus to be on the volume slider. The volume usually defaults to 100%. M Mute or unmute the sound of the video. Beware that the occasional video defaults to muted on starting, though this seems rare. Home (slider focus required) Mute the audio. This is not a toggle like m. End (slider focus required) Unmute the audio and move the volume to 100%. This is not a toggle like m. F Toggle between full screen and normal video size. / (slash) Move focus to the YouTube search box. ' (apostrophe) Pop open and move focus to the Find bar for about four seconds.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard B. McDonald
Sent: Friday, February 17, 2017 3:01 PM
To: main@jfw.groups.io
Subject: Re: How do you move a "slider" for elapsed time for a YouTube video?

 

How do you use the "youtube shortcuts" mentioned below?  Is it like if you are playing a video you would press, for example, Alt+4" to go to 40% of the way into the video?  That is, are these "shortcuts" initiated with the "Alt" key?

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of majno
Sent: Friday, February 17, 2017 1:50 AM
To: main@jfw.groups.io
Subject: Re: How do you move a "slider" for elapsed time for a YouTube video?

 

using the youtube shortcuts.

 

arrows to go fordward o backward, and up or down the volume.

"m" to mute, {k" to pause, and 1 to 9 to go to 10 to 90% of video time. 0 to go to begining.

 

Note. use the pass throu function in jaws or nvda before.

 

El 17-Feb-17 a las 4:09 AM, Richard B. McDonald escribió:

Hi!

 

When watching a video on YouTube, there is a “slider” that represents the elapsed time for the current video playing.  How do you move it forward and back?  Really, it is sort of a fast forward or reverse control.

 

Thanks,

Richard

 

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.7998 / Virus Database: 4756/13993 - Release Date: 02/21/17


Re: How do you move a "slider" for elapsed time for a YouTube video?

Gerry Ellis <gerry.ellis@...>
 

Hi,

 

 

www.dlee.org

 

 

 

Take care,

 

Gerry Ellis

 

If you don’t know where you’re going,

How will you know when you get there?

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Poppa Bear
Sent: Tuesday, February 21, 2017 11:21 PM
To: main@jfw.groups.io
Subject: Re: How do you move a "slider" for elapsed time for a YouTube video?

 

Sorry if I missed, but where are these scripts?

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard B. McDonald
Sent: Sunday, February 19, 2017 6:59 AM
To: main@jfw.groups.io
Subject: Re: How do you move a "slider" for elapsed time for a YouTube video?

 

WOW, thanks!  This is very helpful!

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of HH. Smith Jr.
Sent: Friday, February 17, 2017 6:32 PM
To: main@jfw.groups.io
Subject: Re: How do you move a "slider" for elapsed time for a YouTube video?

 

Richard,

 

Here are the detailed instructions and key strokes for the YouTube scripts.

 

Using YouTube With JAWS and the Scripts

 

The scripts provide the following commands:

Ctrl+Shift+S Skip Ad. If a video ad is playing and a Skip button is present, this command will click it to make YouTube start playing the actual video requested.

Ctrl+Shift+Space Press the Play/Pause button if present. This works in both virtual cursor mode and forms mode.

Ctrl+Shift+T Say Time. This command will speak the current time position in the playing video as well as the video's length. If a video ad is playing, the times will relate to the ad rather than to the requested video. Note: The current time position is not always kept up to date by YouTube itself but will be updated if the video is paused and restarted or the play position is changed by the user.

Typing Ctrl+Shift+Space twice will force such an update.

Ctrl+Shift+N and Ctrl+Shift+P Move to the next or previous search results page or video. This works in search results, playlists, and wherever a Next and Previous button can be found.

Ctrl+Shift+V Move focus to the volume slider for the currently playing video. This also switches JAWS into forms mode and causes a number of native YouTube keystrokes to become usable.

The following YouTube-native keystrokes work as indicated when JAWS is in forms mode or if the keystrokes are passed through JAWS directly to YouTube, such as with the JAWS "pass next key through" command, Ins+3. As noted in the below list, some YouTube keystrokes require focus to be on the video's volume slider. This list applies at least to the HTML 5 video player and possibly also to the Flash player.

Space (slider focus required) or K Pause, resume, or play the current video. j or l Rewind or fast-forward the video by a few seconds. Digits 1 through 9 and 0 (slider focus required) Jump to a percentage through the video. 0 jumps to the beginning, 1 to 10% through, 2 to 20% through, etc., and 9 to 90% through. , (comma) or . (period) Slow down or speed up the video without changing its pitch. This amounts to simple compression or expansion of the audio and video. Slowing down far enough may stop playback. Up or Down arrows (slider focus required) Turn up or down the volume of the video by increments of 5%. Right and Left arrows, respectively, perform the same actions and also require focus to be on the volume slider. The volume usually defaults to 100%. M Mute or unmute the sound of the video. Beware that the occasional video defaults to muted on starting, though this seems rare. Home (slider focus required) Mute the audio. This is not a toggle like m. End (slider focus required) Unmute the audio and move the volume to 100%. This is not a toggle like m. F Toggle between full screen and normal video size. / (slash) Move focus to the YouTube search box. ' (apostrophe) Pop open and move focus to the Find bar for about four seconds.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard B. McDonald
Sent: Friday, February 17, 2017 3:01 PM
To: main@jfw.groups.io
Subject: Re: How do you move a "slider" for elapsed time for a YouTube video?

 

How do you use the "youtube shortcuts" mentioned below?  Is it like if you are playing a video you would press, for example, Alt+4" to go to 40% of the way into the video?  That is, are these "shortcuts" initiated with the "Alt" key?

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of majno
Sent: Friday, February 17, 2017 1:50 AM
To: main@jfw.groups.io
Subject: Re: How do you move a "slider" for elapsed time for a YouTube video?

 

using the youtube shortcuts.

 

arrows to go fordward o backward, and up or down the volume.

"m" to mute, {k" to pause, and 1 to 9 to go to 10 to 90% of video time. 0 to go to begining.

 

Note. use the pass throu function in jaws or nvda before.

 

El 17-Feb-17 a las 4:09 AM, Richard B. McDonald escribió:

Hi!

 

When watching a video on YouTube, there is a “slider” that represents the elapsed time for the current video playing.  How do you move it forward and back?  Really, it is sort of a fast forward or reverse control.

 

Thanks,

Richard

 

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.7998 / Virus Database: 4756/13993 - Release Date: 02/21/17