|
Re: how to merge cells in Microsoft excel 2007
Adekoya Rasak
thank you for your response. In a situation that I need to merge cells
toggle quoted messageShow quoted text
both on row and column, how do i go about it. for example, I need to merge cell from b4 to d9 all together, how do I select this range of cells.
On 20/01/2017, Sieghard Weitzel <sieghard@...> wrote:
You beat me to the punch Pablo. Just wanted to add one thing: if your cells --
*ADEKOYA, Rasak*. *Leadership, Management & Content Consultant* at www.360Connect.com.ng <http://www.360connect.com.ng/> If you want to significantly multiply your productivity & profit, talk to me +2348034829045 <https://twitter.com/Iamrasakadekoya>@Iamrasakadekoya <https://twitter.com/Iamrasakadekoya> asiwaju.rasak29 *CONFIDENTIALITY NOTICE:* This e-mail and any attachment are confidential and may be privileged or otherwise protected from disclosure. It is solely intended for the person(s) named above. If you are not the intended recipient, any reading, use, disclosure, copying or distribution of all or parts of this e-mail or associated attachments is strictly prohibited. If you are not an intended recipient, please notify the sender immediately by replying to this message or by telephone and delete this e-mail and any attachments permanently from your system.
|
||||
|
|
||||
|
Re: What is the JAWS command to spell a word phonetically?
Mike B. <mb69mach1@...>
No, it's not broken, the keystroke
is, Insert / Jaws key + Numpad 5 key, 3 times quickly.
Take care. Mike Sent from my iBarstool.
----- Original Message -----
From: Lisle, Ted (CHFS DMS)
Sent: Friday, January 20, 2017 9:03 AM
Subject: Re: What is the JAWS command to spell a word
phonetically? -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario Sent: Friday, January 20, 2017 12:01 PM To: main@jfw.groups.io Subject: Re: What is the JAWS command to spell a word phonetically? find the first letter of the word, press numpad 5 twice turns on phonetic mode, and arrow to the right. a bit tedious, but doable. pressing and holding down the insert and pressing the numpad 3 times quickly used to work to spell out a word phonetically, but evidently not in 16 because I just tried. but there must be a seperate combination like control+insert+numpad 5 or some other additional modifier plus the usual combination. ------- Original Message -------- From: Lisle, Ted (CHFS DMS) [mailto:ted.lisle@...] Sent: Friday, Jan 20, 2017 10:56 AM EST To: main@jfw.groups.io Subject: What is the JAWS command to spell a word phonetically? What do you know, that doesn't work in 16. I'd never noticed that. It gives the letters, but does not go on to give the phonetics. *From:*main@jfw.groups.io [mailto:main@jfw.groups.io] *On Behalf Of *majno *Sent:* Friday, January 20, 2017 9:49 AM *To:* main@jfw.groups.io *Subject:* Re: What is the JAWS command to spell a word phonetically? Press the key 5 tree times. in numpad keys. El 20-Jan-17 a las 9:45 AM, Richard B. McDonald escribió: Hi! What is the JAWS command to spell a word phonetically; like alpha, beta, Charlie and so on? Thanks, Richard
|
||||
|
|
||||
|
Anounsing the release of the ElBraille W14JG2
Hello,
Elita Group ltd, is happy to announce the release and availability of the 2nd generation ElBraille Windows 10 portable computer with speech and Braille input/output, model W14JG2.
Over the last year, the ElBraille device has undergone a huge manufacturing overhaul, and today, we are happy to offer the best in class notetaker type device, on the most opened desktop platform. For those of you who come to CSUN, you will be able to see the device at the Freedom scientific booth. Please find attached the ElBraille quick start guide, which also contains it’s full technical specifications. Also, I am happy to announce, that we are already finalizing our work on a version of the ElBraille for the 40 sell Focus Blue display, which will make any existing current generation Focus Blue display a full Windows PC. This device will be also presented during CSUN.
The second generation ElBraille is already shipping, and we have lots of happy users in all parts of the world.
I am here to answer any question you may have about the product.
Best regards,
Adi Kushnir.
|
||||
|
|
||||
|
Re: What is the JAWS command to spell a word phonetically?
ratshtron
hmmm, the holding the insert key down and
pressing the numpad5 twice only renders the spelling of the word. no phonetics either. Legend has it that on Friday 1/20/2017 11:01 AM, Mario said: ---------------------------------------- find the first letter of the word, press numpad 5 twice turns on----------------------------------------
|
||||
|
|
||||
|
Re: What is the JAWS command to spell a word phonetically?
Carolyn Arnold <4carolyna@...>
Right with my JAWS 18, two times, just like in all others
toggle quoted messageShow quoted text
gives the phonetic character, and three times gives the Ascii number. Bye for now, Carolyn
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of ratshtron Sent: Friday, January 20, 2017 4:39 PM To: main@jfw.groups.io Subject: Re: What is the JAWS command to spell a word phonetically? no, three times will render ascii values. Legend has it that on Friday 1/20/2017 08:49 AM, majno said: ---------------------------------------- Press the key 5 tree times. in numpad keys.like alpha, ----------------------------------------beta, Charlie and so on?
|
||||
|
|
||||
|
Re: What is the JAWS command to spell a word phonetically?
Carolyn Arnold <4carolyna@...>
It works with 18.
toggle quoted messageShow quoted text
Bye for now, Carolyn
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lisle, Ted (CHFS DMS) Sent: Friday, January 20, 2017 10:57 AM To: main@jfw.groups.io Subject: Re: What is the JAWS command to spell a word phonetically? What do you know, that doesn’t work in 16. I’d never noticed that. It gives the letters, but does not go on to give the phonetics. From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of majno Sent: Friday, January 20, 2017 9:49 AM To: main@jfw.groups.io Subject: Re: What is the JAWS command to spell a word phonetically? Press the key 5 tree times. in numpad keys. El 20-Jan-17 a las 9:45 AM, Richard B. McDonald escribió: Hi! What is the JAWS command to spell a word phonetically; like alpha, beta, Charlie and so on? Thanks, Richard
|
||||
|
|
||||
|
Re: What is the JAWS command to spell a word phonetically?
ratshtron
hmmm, pressing the numpad5 three times and
holding doesn't work, but if you press shift plus numpad5 twice the word is spelled but not phoneticly. you have to press the numpad5 twice quickly to switch to phonetic mode and then arrow through the word. Legend has it that on Friday 1/20/2017 11:03 AM, Lisle, Ted (CHFS DMS) said: ---------------------------------------- Maybe so, or maybe FS just broke it; it's been known to happen.----------------------------------------
|
||||
|
|
||||
|
Re: how to merge cells in Microsoft excel 2007
Sieghard Weitzel <sieghard@...>
You beat me to the punch Pablo. Just wanted to add one thing: if your cells already contain values and you merge them you get a message that only the value of the top left cell is retained. Keep this in mind, it is better to merge the cells first. For example: I opened a blank Excel sheet and put "How to merge cells" in A1, A2, B1 and B2 (I paste this small 2-row, 2-column table below to demonstrate:
I then held down the shift key when I was on A1 and did one down arrow and one right arrow to highlight these 4 cells, then I did what Pablo explained: Control+1, it already put me on the "Alignment" tab and I pressed tab until I got to "Merge Cells" which is a checkbox and which Pablo already explained you can activate with the Alt+M shortcut. Then I tabbed to OK and as soon as I pressed it I received the warning that only the top left value would be retained, I went ahead and now had A1 to B2 as a merged single cell, but only "How" was there as "to merge cells" was in the other 3 cells.
Regards, Sieghard
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Pablo Morales Sent: Friday, January 20, 2017 1:41 PM To: main@jfw.groups.io Subject: Re: how to merge cells in Microsoft excel 2007
After you have selected the cells that you want to merge, press control 1 on the number row, then press control tab to navigate to the Alignment Tab, then press alt + m, later press enter. That is it.
-----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Adekoya Rasak Sent: Friday, January 20, 2017 4:29 PM Subject: how to merge cells in Microsoft excel 2007
Hello All,
Please, how can I merge multiple cells containing both rows and column on excel 2007 using jaws 17. Meanwhile, what does it mean to make use of border and filter in excel.
sincere regard.
--
*ADEKOYA, Rasak*. *Leadership, Management & Content Consultant* at www.360Connect.com.ng <http://www.360connect.com.ng/>
If you want to significantly multiply your productivity & profit, talk to me
+2348034829045
<https://twitter.com/Iamrasakadekoya>@Iamrasakadekoya <https://twitter.com/Iamrasakadekoya>
asiwaju.rasak29
*CONFIDENTIALITY NOTICE:* This e-mail and any attachment are confidential and may be privileged or otherwise protected from disclosure. It is solely intended for the person(s) named above. If you are not the intended recipient, any reading, use, disclosure, copying or distribution of all or parts of this e-mail or associated attachments is strictly prohibited. If you are not an intended recipient, please notify the sender immediately by replying to this message or by telephone and delete this e-mail and any attachments permanently from your system.
|
||||
|
|
||||
|
Re: What is the JAWS command to spell a word phonetically?
ratshtron
try pressing the numpad5 twice and then arrow left and right through the word.
e Legend has it that on Friday 1/20/2017 09:56 AM, Lisle, Ted (CHFS DMS) said: ---------------------------------------- What do you know, that doesn’t work in 16. I’d----------------------------------------
|
||||
|
|
||||
|
Re: how to merge cells in Microsoft excel 2007
Pablo Morales
After you have selected the cells that you want to merge, press control 1 on the number row, then press control tab to navigate to the Alignment Tab, then press alt + m, later press enter. That is it.
toggle quoted messageShow quoted text
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Adekoya Rasak Sent: Friday, January 20, 2017 4:29 PM To: main@jfw.groups.io Subject: how to merge cells in Microsoft excel 2007 Hello All, Please, how can I merge multiple cells containing both rows and column on excel 2007 using jaws 17. Meanwhile, what does it mean to make use of border and filter in excel. sincere regard. -- *ADEKOYA, Rasak*. *Leadership, Management & Content Consultant* at www.360Connect.com.ng <http://www.360connect.com.ng/> If you want to significantly multiply your productivity & profit, talk to me +2348034829045 <https://twitter.com/Iamrasakadekoya>@Iamrasakadekoya <https://twitter.com/Iamrasakadekoya> asiwaju.rasak29 *CONFIDENTIALITY NOTICE:* This e-mail and any attachment are confidential and may be privileged or otherwise protected from disclosure. It is solely intended for the person(s) named above. If you are not the intended recipient, any reading, use, disclosure, copying or distribution of all or parts of this e-mail or associated attachments is strictly prohibited. If you are not an intended recipient, please notify the sender immediately by replying to this message or by telephone and delete this e-mail and any attachments permanently from your system.
|
||||
|
|
||||
|
Re: What is the JAWS command to spell a word phonetically?
ratshtron
no, three times will render ascii values.
Legend has it that on Friday 1/20/2017 08:49 AM, majno said: ---------------------------------------- Press the key 5 tree times. in numpad keys.----------------------------------------
|
||||
|
|
||||
|
Re: What is the JAWS command to spell a word phonetically?
ratshtron
you can press the numpad5 twice quickly and then you move through the word with left and right arrows
Legend has it that on Friday 1/20/2017 08:45 AM, Richard B. McDonald said: ---------------------------------------- Hi!----------------------------------------
|
||||
|
|
||||
|
Re: Skype problem
Sieghard Weitzel <sieghard@...>
If not install Skype on your iPhone and try to accept it there, it's a bit less cluttered and easier to use in my opinion.
From: main@jfw.groups.io [mailto:main@jfw.groups.io]
On Behalf Of Gudrun Brunot
Sent: Friday, January 20, 2017 12:06 PM To: main@jfw.groups.io Subject: Skype problem
I have Skype 7 and the latest Skype script that I could find. I have a person who is trying to be added to my contacts, and I can’t find her request. I know I’m supposed to find “pending authorization,” at least that’s what she sees at her end. I can’t find her when I try to add contact, search skype, and type in her skype name. Where do I find her request to be added?
Thanks
gudrunbrunot.com Listen to samples and read about my services: translation, interpreting, sound design, and listen to clips from my CD, J-Walking.
|
||||
|
|
||||
|
how to merge cells in Microsoft excel 2007
Adekoya Rasak
Hello All,
Please, how can I merge multiple cells containing both rows and column on excel 2007 using jaws 17. Meanwhile, what does it mean to make use of border and filter in excel. sincere regard. -- *ADEKOYA, Rasak*. *Leadership, Management & Content Consultant* at www.360Connect.com.ng <http://www.360connect.com.ng/> If you want to significantly multiply your productivity & profit, talk to me +2348034829045 <https://twitter.com/Iamrasakadekoya>@Iamrasakadekoya <https://twitter.com/Iamrasakadekoya> asiwaju.rasak29 *CONFIDENTIALITY NOTICE:* This e-mail and any attachment are confidential and may be privileged or otherwise protected from disclosure. It is solely intended for the person(s) named above. If you are not the intended recipient, any reading, use, disclosure, copying or distribution of all or parts of this e-mail or associated attachments is strictly prohibited. If you are not an intended recipient, please notify the sender immediately by replying to this message or by telephone and delete this e-mail and any attachments permanently from your system.
|
||||
|
|
||||
|
Re: [win10] Creating a table in Microsoft Word 2016
Marquette, Ed <ed.marquette@...>
I was talking about Word 20143. So, that is a Microsoft screw-up in 2013 that was fixed in 2016. I hope the spell checker was fixed too.
toggle quoted messageShow quoted text
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marianne Denning Sent: Friday, January 20, 2017 1:34 PM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 I thought he said Word 2016 so you do not need the I. Once you use alt n followed by t you are placed where you can choose the size of table you want. -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario Sent: Friday, January 20, 2017 1:54 PM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 Ed, why do you say, ", before Microsoft messed it up), ,..." please explain? -------- Original Message -------- From: Marquette, Ed [mailto:ed.marquette@...] Sent: Friday, Jan 20, 2017 12:45 PM EST To: main@jfw.groups.io Subject: [win10] Creating a table in Microsoft Word 2016 Actually, to insert a table in Word (and to do it the Word 2010 way, press Alt followed by "n" (for the insert ribbon, then "t" (for table), and finally "I" for insert). The earlier instructions left out this last step. When you hit "I" for insert, you get the familiar dialog in which you can easily specify columns and rows. If you want to make further adjustments, just right click (or press Applications Key) within any cell. Then, use control + tab to modify row properties, column properties, or table properties. -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard Weitzel Sent: Friday, January 20, 2017 11:34 AM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 Another way to quickly create a table in Word is to open a blank workbook in Excel, use Shift with the arrow keys to select a number of rows and columns, then use Control+C to copy these blank rows and columns to the clipboard and then go to Word and paste them in. I just tried this by selecting 5 rows and 6 columns and I had a nice blank table in Word with 5 rows and 6 columns and I can now type in whatever I want in these cells and use the tab key to keep making it bigger if I want. -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marianne Denning Sent: Friday, January 20, 2017 6:49 AM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 If you want to create a table in Word use alt n followed by t. Then you can arrow down and right to get the size of table you want. Yes, if you hit tab at the end of the table it will add more to the table. -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lisle, Ted (CHFS DMS) Sent: Friday, January 20, 2017 7:58 AM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 That's the way I did it a time or two--lazy but darned effective. By the way, Carolyn, I didn't know the Courier new factoid, but that's probably one reason it's so popular. Ted -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Carolyn Arnold Sent: Thursday, January 19, 2017 6:43 PM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 That sounds like a better idea. Bye for now, Carolyn -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Nicole Massey Sent: Thursday, January 19, 2017 6:30 PM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 For things like this I like building the table in Excel and then copying it into Word. It's easy to build that way, it copies clean, and it also allows sorting of the table before inserting it. -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Joseph Lee Sent: Thursday, January 19, 2017 3:26 PM To: main@jfw.groups.io Subject: FW: [win10] Creating a table in Microsoft Word 2016 Hi, Can anyone help Chris? Thanks. Cheers, Joseph From: win10@win10.groups.io [mailto:win10@win10.groups.io] On Behalf Of Christopher-Mark Gilland Sent: Thursday, January 19, 2017 1:24 PM To: win10@win10.groups.io Subject: [win10] Creating a table in Microsoft Word 2016 Firstly and foremost, a few things here to note. 1. I am fairly confident with using the ribbon bar, in general. 2. I am using JAWS 18, latest build, verbosity set to advanced, menu and tutor messages disabled 3. I am *not* using virtual ribbons. OK, those things out of the way, here is the situation. I am working on a Word document which is going to contain a list of actions, and their associated commands for a particular piece of software. What I want to do is to have two columns. The left column will be the actual action performed, and the right column will contain the necessary command to carry out that action. So, this is not a rellavant command, but an example might be, in the first collomn I might say something like, New Document. In the corresponding column on the right, I'd then say, CTRL+N. I've never actually created tables in Microsoft Word. I think I might have done it once way back in Word 2003, but gosh knows, that's been years. I'm just now starting to really get back into doing more advanced Word processing again. Not that this really is all that advanced, but... I just need to know the process for not only creating this table, but once created, how do I then move from cell to cell within the table? Don't I use the tab key, and shift+Tab? Further, when on the last row, last column, and I correct in assuming that if I then hit tab again, rather than taking me out of the table, that would just add another row to the bottom of the table? I ask this for 2 reasons: 1. I don't know how many rows and columns I'm going to wind up needing in the long run. I've not counted. Is that necessary to do ahead of time? 2. Once done with the table, I don't want to be stuck in it by means of just adding more to it. I need a way to unjail myself from it, sota speak. Thank you all for any, and all help. Again, please observe the few factors I list at the top of this message, as they might impact the procedure for getting this to work. I could do this as a nested list per command, but I think for the context of what I'm doing, that would look very very sloppy. Chris. ---------------------------------------------------------------------- This E-mail message is confidential, is intended only for the named recipients above and may contain information that is privileged, attorney work product or otherwise protected by applicable law. If you have received this message in error, please notify the sender at 402-346-6000 and delete this E-mail message. Thank you. ---------------------------------------------------------------------- This E-mail message is confidential, is intended only for the named recipients above and may contain information that is privileged, attorney work product or otherwise protected by applicable law. If you have received this message in error, please notify the sender at 402-346-6000 and delete this E-mail message. Thank you.
|
||||
|
|
||||
|
jart, and jaws.
Curtis Delzer
Hi! I use jart plus 5.4, and when I hit down arrow, jart seems to be
stuck on the current line. What am I doing wrong? ----- Curtis Delzer, HS. K6VFO San Bernardino, CA
|
||||
|
|
||||
|
Re: [win10] Creating a table in Microsoft Word 2016
Marianne Denning
I thought he said Word 2016 so you do not need the I. Once you use alt n followed by t you are placed where you can choose the size of table you want.
toggle quoted messageShow quoted text
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario Sent: Friday, January 20, 2017 1:54 PM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 Ed, why do you say, ", before Microsoft messed it up), ,..." please explain? -------- Original Message -------- From: Marquette, Ed [mailto:ed.marquette@...] Sent: Friday, Jan 20, 2017 12:45 PM EST To: main@jfw.groups.io Subject: [win10] Creating a table in Microsoft Word 2016 Actually, to insert a table in Word (and to do it the Word 2010 way, press Alt followed by "n" (for the insert ribbon, then "t" (for table), and finally "I" for insert). The earlier instructions left out this last step. When you hit "I" for insert, you get the familiar dialog in which you can easily specify columns and rows. If you want to make further adjustments, just right click (or press Applications Key) within any cell. Then, use control + tab to modify row properties, column properties, or table properties. -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard Weitzel Sent: Friday, January 20, 2017 11:34 AM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 Another way to quickly create a table in Word is to open a blank workbook in Excel, use Shift with the arrow keys to select a number of rows and columns, then use Control+C to copy these blank rows and columns to the clipboard and then go to Word and paste them in. I just tried this by selecting 5 rows and 6 columns and I had a nice blank table in Word with 5 rows and 6 columns and I can now type in whatever I want in these cells and use the tab key to keep making it bigger if I want. -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marianne Denning Sent: Friday, January 20, 2017 6:49 AM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 If you want to create a table in Word use alt n followed by t. Then you can arrow down and right to get the size of table you want. Yes, if you hit tab at the end of the table it will add more to the table. -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lisle, Ted (CHFS DMS) Sent: Friday, January 20, 2017 7:58 AM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 That's the way I did it a time or two--lazy but darned effective. By the way, Carolyn, I didn't know the Courier new factoid, but that's probably one reason it's so popular. Ted -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Carolyn Arnold Sent: Thursday, January 19, 2017 6:43 PM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 That sounds like a better idea. Bye for now, Carolyn -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Nicole Massey Sent: Thursday, January 19, 2017 6:30 PM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 For things like this I like building the table in Excel and then copying it into Word. It's easy to build that way, it copies clean, and it also allows sorting of the table before inserting it. -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Joseph Lee Sent: Thursday, January 19, 2017 3:26 PM To: main@jfw.groups.io Subject: FW: [win10] Creating a table in Microsoft Word 2016 Hi, Can anyone help Chris? Thanks. Cheers, Joseph From: win10@win10.groups.io [mailto:win10@win10.groups.io] On Behalf Of Christopher-Mark Gilland Sent: Thursday, January 19, 2017 1:24 PM To: win10@win10.groups.io Subject: [win10] Creating a table in Microsoft Word 2016 Firstly and foremost, a few things here to note. 1. I am fairly confident with using the ribbon bar, in general. 2. I am using JAWS 18, latest build, verbosity set to advanced, menu and tutor messages disabled 3. I am *not* using virtual ribbons. OK, those things out of the way, here is the situation. I am working on a Word document which is going to contain a list of actions, and their associated commands for a particular piece of software. What I want to do is to have two columns. The left column will be the actual action performed, and the right column will contain the necessary command to carry out that action. So, this is not a rellavant command, but an example might be, in the first collomn I might say something like, New Document. In the corresponding column on the right, I'd then say, CTRL+N. I've never actually created tables in Microsoft Word. I think I might have done it once way back in Word 2003, but gosh knows, that's been years. I'm just now starting to really get back into doing more advanced Word processing again. Not that this really is all that advanced, but... I just need to know the process for not only creating this table, but once created, how do I then move from cell to cell within the table? Don't I use the tab key, and shift+Tab? Further, when on the last row, last column, and I correct in assuming that if I then hit tab again, rather than taking me out of the table, that would just add another row to the bottom of the table? I ask this for 2 reasons: 1. I don't know how many rows and columns I'm going to wind up needing in the long run. I've not counted. Is that necessary to do ahead of time? 2. Once done with the table, I don't want to be stuck in it by means of just adding more to it. I need a way to unjail myself from it, sota speak. Thank you all for any, and all help. Again, please observe the few factors I list at the top of this message, as they might impact the procedure for getting this to work. I could do this as a nested list per command, but I think for the context of what I'm doing, that would look very very sloppy. Chris. ---------------------------------------------------------------------- This E-mail message is confidential, is intended only for the named recipients above and may contain information that is privileged, attorney work product or otherwise protected by applicable law. If you have received this message in error, please notify the sender at 402-346-6000 and delete this E-mail message. Thank you.
|
||||
|
|
||||
|
Re: Skype problem
Marianne Denning
It should be in your contacts. If you hit f2 it will put you in contacts and the request should be there. -- Marianne Denning, TVI, MA Teacher of students who are blind or visually impaired (513) 607-6053
|
||||
|
|
||||
|
Skype problem
Gudrun Brunot
I have Skype 7 and the latest Skype script that I could find. I have a person who is trying to be added to my contacts, and I can’t find her request. I know I’m supposed to find “pending authorization,” at least that’s what she sees at her end. I can’t find her when I try to add contact, search skype, and type in her skype name. Where do I find her request to be added?
Thanks
gudrunbrunot.com Listen to samples and read about my services: translation, interpreting, sound design, and listen to clips from my CD, J-Walking.
|
||||
|
|
||||
|
Re: [win10] Creating a table in Microsoft Word 2016
Marquette, Ed <ed.marquette@...>
Before the ribbons, one simply inserted a table with one or 2 keystrokes (at most). Then, the table dialog was immediately available.
toggle quoted messageShow quoted text
If one uses the keystrokes I suggested, one gets the same result, but until I discovered that, I would go to insert, then table, then have to scroll through an interminable number of useless, trash options. It is a little like the find command. Control + f used to work great. Then, the ribbons messed that up. Now, control + f gives one that ridiculous panel. One can still get the functional find command, but one has to use control + h and then alt + D. The same is true in the Word 2013 spell check. What a mess that is, compared to Word 2010.
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario Sent: Friday, January 20, 2017 12:54 PM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 Ed, why do you say, ", before Microsoft messed it up), ,..." please explain? -------- Original Message -------- From: Marquette, Ed [mailto:ed.marquette@...] Sent: Friday, Jan 20, 2017 12:45 PM EST To: main@jfw.groups.io Subject: [win10] Creating a table in Microsoft Word 2016 Actually, to insert a table in Word (and to do it the Word 2010 way, press Alt followed by "n" (for the insert ribbon, then "t" (for table), and finally "I" for insert). The earlier instructions left out this last step. When you hit "I" for insert, you get the familiar dialog in which you can easily specify columns and rows. If you want to make further adjustments, just right click (or press Applications Key) within any cell. Then, use control + tab to modify row properties, column properties, or table properties. -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard Weitzel Sent: Friday, January 20, 2017 11:34 AM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 Another way to quickly create a table in Word is to open a blank workbook in Excel, use Shift with the arrow keys to select a number of rows and columns, then use Control+C to copy these blank rows and columns to the clipboard and then go to Word and paste them in. I just tried this by selecting 5 rows and 6 columns and I had a nice blank table in Word with 5 rows and 6 columns and I can now type in whatever I want in these cells and use the tab key to keep making it bigger if I want. -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marianne Denning Sent: Friday, January 20, 2017 6:49 AM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 If you want to create a table in Word use alt n followed by t. Then you can arrow down and right to get the size of table you want. Yes, if you hit tab at the end of the table it will add more to the table. -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lisle, Ted (CHFS DMS) Sent: Friday, January 20, 2017 7:58 AM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 That's the way I did it a time or two--lazy but darned effective. By the way, Carolyn, I didn't know the Courier new factoid, but that's probably one reason it's so popular. Ted -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Carolyn Arnold Sent: Thursday, January 19, 2017 6:43 PM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 That sounds like a better idea. Bye for now, Carolyn -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Nicole Massey Sent: Thursday, January 19, 2017 6:30 PM To: main@jfw.groups.io Subject: Re: [win10] Creating a table in Microsoft Word 2016 For things like this I like building the table in Excel and then copying it into Word. It's easy to build that way, it copies clean, and it also allows sorting of the table before inserting it. -----Original Message----- From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Joseph Lee Sent: Thursday, January 19, 2017 3:26 PM To: main@jfw.groups.io Subject: FW: [win10] Creating a table in Microsoft Word 2016 Hi, Can anyone help Chris? Thanks. Cheers, Joseph From: win10@win10.groups.io [mailto:win10@win10.groups.io] On Behalf Of Christopher-Mark Gilland Sent: Thursday, January 19, 2017 1:24 PM To: win10@win10.groups.io Subject: [win10] Creating a table in Microsoft Word 2016 Firstly and foremost, a few things here to note. 1. I am fairly confident with using the ribbon bar, in general. 2. I am using JAWS 18, latest build, verbosity set to advanced, menu and tutor messages disabled 3. I am *not* using virtual ribbons. OK, those things out of the way, here is the situation. I am working on a Word document which is going to contain a list of actions, and their associated commands for a particular piece of software. What I want to do is to have two columns. The left column will be the actual action performed, and the right column will contain the necessary command to carry out that action. So, this is not a rellavant command, but an example might be, in the first collomn I might say something like, New Document. In the corresponding column on the right, I'd then say, CTRL+N. I've never actually created tables in Microsoft Word. I think I might have done it once way back in Word 2003, but gosh knows, that's been years. I'm just now starting to really get back into doing more advanced Word processing again. Not that this really is all that advanced, but... I just need to know the process for not only creating this table, but once created, how do I then move from cell to cell within the table? Don't I use the tab key, and shift+Tab? Further, when on the last row, last column, and I correct in assuming that if I then hit tab again, rather than taking me out of the table, that would just add another row to the bottom of the table? I ask this for 2 reasons: 1. I don't know how many rows and columns I'm going to wind up needing in the long run. I've not counted. Is that necessary to do ahead of time? 2. Once done with the table, I don't want to be stuck in it by means of just adding more to it. I need a way to unjail myself from it, sota speak. Thank you all for any, and all help. Again, please observe the few factors I list at the top of this message, as they might impact the procedure for getting this to work. I could do this as a nested list per command, but I think for the context of what I'm doing, that would look very very sloppy. Chris. ---------------------------------------------------------------------- This E-mail message is confidential, is intended only for the named recipients above and may contain information that is privileged, attorney work product or otherwise protected by applicable law. If you have received this message in error, please notify the sender at 402-346-6000 and delete this E-mail message. Thank you. ---------------------------------------------------------------------- This E-mail message is confidential, is intended only for the named recipients above and may contain information that is privileged, attorney work product or otherwise protected by applicable law. If you have received this message in error, please notify the sender at 402-346-6000 and delete this E-mail message. Thank you.
|
||||
|
|