Date   

Re: outlook.com and outlook 2016

Kimsan <kimsansong@...>
 

Hi Keith:

 

That was the first thing I looked at.  There is an all and undread button to click based on what you would like to view but that doesn’t change anything in definite, just temporary.

 

I’ll just delete and plug my account back in.

There is an email I really need that I see on the outlook.com site that is not showing in my inbox.

 

Kimsan Song

kimsansong@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kramlinger, Keith G., M.D.
Sent: Thursday, October 27, 2016 10:19 AM
To: main@jfw.groups.io
Subject: Re: outlook.com and outlook 2016

 

Hi,

 

Could you have a preference enabled in Outlook 2016 to show only unread messages? Just an idea.

 

Keith

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kimsan
Sent: Thursday, October 27, 2016 12:00 PM
To: main@jfw.groups.io
Subject: Re: outlook.com and outlook 2016

 

I want them visible in outlook 2016, though.

 

Kimsan Song

kimsansong@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of James Malone
Sent: Thursday, October 27, 2016 9:46 AM
To: main@jfw.groups.io
Subject: Re: outlook.com and outlook 2016

 

Sounds like a server issue. If you delete them off the server, this problem will go away.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kimsan
Sent: Thursday, October 27, 2016 8:45 AM
To: main@jfw.groups.io
Subject: outlook.com and outlook 2016

 

Hi,

 

Last week, I noticed something was strange regarding my emails in outlook 2016 and outlook.com.

 

In outlook 2016, I had several emails that should be there and I’ve read but not deleted.  However, on the outlook.com site, in the inbox I see all the messages.  How come they are visible on outlook.com and not outlook 2016?

 

Thanks.

 

 

Kimsan Song

kimsansong@...

 


Re: outlook.com and outlook 2016

Kramlinger, Keith G., M.D. <kramlinger.keith@...>
 

Hi,

 

Could you have a preference enabled in Outlook 2016 to show only unread messages? Just an idea.

 

Keith

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kimsan
Sent: Thursday, October 27, 2016 12:00 PM
To: main@jfw.groups.io
Subject: Re: outlook.com and outlook 2016

 

I want them visible in outlook 2016, though.

 

Kimsan Song

kimsansong@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of James Malone
Sent: Thursday, October 27, 2016 9:46 AM
To: main@jfw.groups.io
Subject: Re: outlook.com and outlook 2016

 

Sounds like a server issue. If you delete them off the server, this problem will go away.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kimsan
Sent: Thursday, October 27, 2016 8:45 AM
To: main@jfw.groups.io
Subject: outlook.com and outlook 2016

 

Hi,

 

Last week, I noticed something was strange regarding my emails in outlook 2016 and outlook.com.

 

In outlook 2016, I had several emails that should be there and I’ve read but not deleted.  However, on the outlook.com site, in the inbox I see all the messages.  How come they are visible on outlook.com and not outlook 2016?

 

Thanks.

 

 

Kimsan Song

kimsansong@...

 


Re: outlook.com and outlook 2016

Kimsan <kimsansong@...>
 

I want them visible in outlook 2016, though.

 

Kimsan Song

kimsansong@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of James Malone
Sent: Thursday, October 27, 2016 9:46 AM
To: main@jfw.groups.io
Subject: Re: outlook.com and outlook 2016

 

Sounds like a server issue. If you delete them off the server, this problem will go away.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kimsan
Sent: Thursday, October 27, 2016 8:45 AM
To: main@jfw.groups.io
Subject: outlook.com and outlook 2016

 

Hi,

 

Last week, I noticed something was strange regarding my emails in outlook 2016 and outlook.com.

 

In outlook 2016, I had several emails that should be there and I’ve read but not deleted.  However, on the outlook.com site, in the inbox I see all the messages.  How come they are visible on outlook.com and not outlook 2016?

 

Thanks.

 

 

Kimsan Song

kimsansong@...

 


Re: outlook.com and outlook 2016

James Malone
 

Sounds like a server issue. If you delete them off the server, this problem will go away.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kimsan
Sent: Thursday, October 27, 2016 8:45 AM
To: main@jfw.groups.io
Subject: outlook.com and outlook 2016

 

Hi,

 

Last week, I noticed something was strange regarding my emails in outlook 2016 and outlook.com.

 

In outlook 2016, I had several emails that should be there and I’ve read but not deleted.  However, on the outlook.com site, in the inbox I see all the messages.  How come they are visible on outlook.com and not outlook 2016?

 

Thanks.

 

 

Kimsan Song

kimsansong@...

 


outlook.com and outlook 2016

Kimsan <kimsansong@...>
 

Hi,

 

Last week, I noticed something was strange regarding my emails in outlook 2016 and outlook.com.

 

In outlook 2016, I had several emails that should be there and I’ve read but not deleted.  However, on the outlook.com site, in the inbox I see all the messages.  How come they are visible on outlook.com and not outlook 2016?

 

Thanks.

 

 

Kimsan Song

kimsansong@...

 


vocolizor voices

anil adivishnu
 

hi iam useing jaws 18 version and i found vocalizor express2 voices
version page i cant abel to choos lang also i am not finding any
voices has any one noticed it?


Updating authorizations

Kramlinger, Keith G., M.D. <kramlinger.keith@...>
 

Hi,

 

I’m on JAWS 17.Several months ago, I bought an SMA 2-pack upgrade, but it’s not showing on my JAWS control panel under About JaAWS.

 

I spoke with a VFO support person today who told me to Update Authorizations while having Admin rights.

 

Before I start this process, is there any other info I’ll need to have in order to complete this process. The technician didn’t seem too interested in helping me understand this process. If I need my current authorization number, for example, I’d like to have that ready before I start this process. Will I need this, or any other info?

 

Thanks in advance, Keith


jaws 17 stops reading in winmail

Mark Furness
 

                                I am running jaws 17.0.2619 and the latest windows 10.

Some tines when I tab through winmail jaws does not read.  

Hitting insert 8 or insert 5, jaws will read the current line word respectively.

I have to close winmail and reopen it to enable jaws to read automatically Small matter but a pain!

 

Am I the only person with this pain  in the butt?

Is there  a fix?

 

Thank you for your responses!

 

Mark F

 

 




Adobe Audition

Robbie <tickleberryfun@...>
 

Hi there!
I'd like to find out if Audition is accessible with JAWS or if there are any
current scripts. I tried it with NVDA and a lot of controls, values and
dialogues were not spoken. I can't imagine JAWS acting very different
without scripts. However, my research only turned up stuff relating to JAWS
11 and Audition 1.5, (ages ago). I'd be glad of any info.

Thanks, Robbie


Re: silencing announcements

Robert Logue
 

I sort of figured out how to silence those messages. It is a setting in Jaws verbosity. I'm not sure which one. I just unchecked everything in the verbosity level I never use and that stopped jaws from reading that announcement all the time.


Maybe it isn't dangerous to allow remote content but I prefer to keep them off.


Thanks.


Will write back if I figure out which verbosity setting does it.


Bob

On 10/25/2016 9:27 AM, Mario wrote:
Bob, the messages cannot be suppressed but Its possible to display all
images from any sender, though its not recommended since malware can
(and is) be embedded in images, and spammers will be able to verify your
e-mail address among other information. If you are willing to accept the
privacy implications of displaying remote content for all messages,
Thunderbird allows you to display remote content by default. To set it so:

1. At the top of the Thunderbird window, click the Tools menu (Alt + T)
and select Options, or click the Application menu button
New Fx Menu
and choose Options.
2. Select the Privacy panel.
3. Check the Allow remote content in messages checkbox to have all
remote content loaded by default.

again, I strongly recommend against doing so. if you're not concerned
about this privacy issue and you want to eventually get spam, go ahead.



-------- Original Message --------
From: Robert Logue [mailto:bobcat11@...]
Sent: Tuesday, Oct 25, 2016 9:29 AM EST
To: main@jfw.groups.io
Subject: silencing announcements

I have an alert that I don't want to hear every time I open email in
Thunderbird.

Alert!
To protect your privacy, Thunderbird has blocked remote content in this
message.
Options
Alt+O
Close this message


I've looked at all the options but don't find a way to block remote
content without hearing this announcement with Jaws.

Any Jaws tricks for suppressing such announcements?


Bob




.




Re: How to shut off JAWS when sightlings want to use your computer?

Kevin Hourigan <kevinthourigan@...>
 

Well we can all relate to that one, haahaaahaa.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of ratshtron
Sent: October 25, 2016 11:58 AM
To: main@jfw.groups.io
Subject: Re: How to shut off JAWS when sightlings want to use your computer?

I forgot to say that is kind-of like someone driving a car in the dark and
the lights are turned off, the car is still moving but the driver cannot see
where he/she is going, lol!


Legend has it that on Tuesday 10/25/2016 12:31 PM, Kevin Hourigan said:
----------------------------------------
I take it that just shutting off speech whith insert spacebar S, is
insufficient?

From: main@jfw.groups.io
[mailto:main@jfw.groups.io] On Behalf Of Brent Harding
Sent: October 24, 2016 1:00 PM
To: main@jfw.groups.io
Subject: Re: How to shut off JAWS when sightlings want to use your
computer?

I wish there was a better way to suspend Jaws.
Supervisor calls end up creating enough wasted time for me because once
Jaws gets restarted, it doesn't see the labels in the phone program,
and sometimes the other program we use for the call flows scrolls funny
so you can get to either yes or no, but not both and so forth, since it
is mostly jaws cursor work. I kind of wonder what fun Windows 10 would
throw in the mix, if work should choose to upgrade one day?

----- Original Message -----
From: <mailto:ted.lisle@...>Lisle, Ted (CHFS DMS)
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Sent: Monday, October 24, 2016 12:52 PM
Subject: Re: How to shut off JAWS when sightlings want to use your
computer?

I haven't used it much, but I think a quick, safe way is JAWS,
Spacebar, S. this should toggle.

I'm still chuckling about sightlings; sounds like Mork-nannu, nannu!

ted

From:
<mailto:main@jfw.groups.io>main@jfw.groups.io
[mailto:main@jfw.groups.io] On Behalf Of Delaunay Christophe
Sent: Wednesday, September 28, 2016 7:35 AM
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Subject: Re: How to shut off JAWS when sightlings want to use your
computer?

Hi Michael,

First, check whether the Jaws shortcut you should have on your desktop
has a shortcut key or not. In order to do so, select it and press
<alt+enter> to display its properties.

Then, tab twice. You should hear "Shortcut key (hotkey):" and something
more. If this additional information is simply <none>, type a key on
your keyboard, (the letter j for instance). Then, tab away from this
item, and
shift+tab back to it. You should now hear
"Shortcut key (hotkey): ctrl+alt+j". "j" could be replaced with the
letter you typed.

If it's ok, tab until the Ok button and press <enter>.

In order to check if it works, try pressing it.
Jaws cannot be launched twice but it should inform you about such an
attempt, for instance, by placing you into the Jaws window or opening
the Jaws context menu, (depends on whether you choose to minimize jaws
in the taskbar on in the notification area).

Now, if it works, you can confidently type <jawskey+f4> in order to
shut jaws down. After your sighted friend gives you back your computer,
simply type the hotkey you previously defined and jaws should restart
soon.

HTH, Have a nice day. ChD

From:
<mailto:main@jfw.groups.io>main@jfw.groups.io
[mailto:main@jfw.groups.io] On Behalf Of Mike Ulrich
Sent: Wednesday, September 28, 2016 1:01 PM
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Subject: How to shut off JAWS when sightlings want to use your computer?

So every now and then one of my sighted friends comes over and wants to
check something out on the internet. But she's always complaining about
my eloquence's voice program running with JAWS.
So what's the fastest and best way to shut JAWS down, and the fastest
and best way to bring it back up, after she's done?

I know way back when, on a different computer, I had someone put on
some short cut keys to disable JAWS, once disabled you could just hit
those short cut keys again, and JAWS would come back up.

So how do I go about setting this up again on my current laptop?
Although, it's kind of funny listening to a sightling freak out; when
having to listen to eloquence going a thousand miles an hour while
working on your computer!

Michael D. Ulrich
Just an ordinary average blind guy!
"Providing Insight for Blindness"
Florida Council of the Blind
Fundraising Committee Member
Home Phone: 239-540-7431
Cell phone: 239-565-5845
Email: <mailto:mulrich@...>mulrich@...


----------------------------------------


Re: Jaws 17 in Windows 7 right CTRL key sticking

Lisle, Ted (CHFS DMS)
 

What you're saying is (to paraphrase a 1960'S soft drink slogan), "things go better with Hank." I'll try to remember that.

Ted

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dave Carlson
Sent: Tuesday, October 25, 2016 10:24 PM
To: main@jfw.groups.io
Subject: Re: Jaws 17 in Windows 7 right CTRL key sticking

...no just rapidly press each of the left/right control, alt, windows, and shift keys while humming your favorite country western tune. That usually fixes it.

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "Lisle, Ted (CHFS DMS)" <ted.lisle@...>
To: <main@jfw.groups.io>
Sent: Tuesday, October 25, 2016 01:06 PM
Subject: Re: Jaws 17 in Windows 7 right CTRL key sticking


It may or may not be JAWS related, but this behavior is two years older
than Moses. Unloading JAWS fixes it; try that if nothing else works.

Ted

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Stan
Holdeman
Sent: Wednesday, October 19, 2016 5:01 AM
To: main@jfw.groups.io
Subject: Re: Jaws 17 in Windows 7 right CTRL key sticking

Good morning, Russell: I am having issues with stuck control and alt keys
running the latest W10 and J 17. Tapping the offending stuck key usually
unsticks it for me, but I know of no more permanent fix.

Stan


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Russell
Solowoniuk
Sent: Tuesday, October 18, 2016 11:08 PM
To: main@jfw.groups.io
Subject: Jaws 17 in Windows 7 right CTRL key sticking

Hi everyone,

Last week at work I had my 4 month old Lenovo desktop computer running
Windows 7, re-imaged because I was having trouble with my computer freezing
a lot. After re-installing Jaws 17, I am running into an issue where, if I
am in a Word document or on a web page in Chrome, and press alt + tab to
switch to another program, Jaws says, Alt CTRL tab, and, instead of being
taken to the program I want, I am placed in a window listing all my running
programs, and I must choose the program I want from the list and then press
enter.

I called VFO tech support, and was briskly, and rudely, I felt, told that
this is not a Jaws issue, and that Jaws has nothing to do with the alt key
sticking. I looked at language and region settings, and I think they are set
where they need to be. Has anyone seen this issue of the right CTRL key
sticking? If so, is there a fix for it?

Thanks for any ideas!

Russell


Re: A different way to review track changes

Cynthia Bruce
 

No worries, I have managed to work through it, but I do appreciate the offer. Really everyone has had very helpful suggestions, and I will undoubtedly look into JAWS 18 as soon as my dissertation is finished. I'm not anxious to switch when I am in the midst of the final crunch.

Thanks to all,

Cynthia

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of George B
Sent: October 26, 2016 11:24 AM
To: main@jfw.groups.io
Subject: Re: A different way to review track changes

Cindy if you wish to send me the doc I can try with jaws 18

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marquette, Ed
Sent: October 26, 2016 06:46
To: main@jfw.groups.io
Subject: Re: A different way to review track changes

That's the word from Escalation at Freedom Scientific or whatever it is called now.
I plan to give JAWS 18 a try when I have some free time.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kimber Gardner
Sent: Wednesday, October 26, 2016 8:29 AM
To: main@jfw.groups.io
Subject: Re: A different way to review track changes

Hmm, I haven't investigated jaws 18 as yet, but if the track changes problem is really fixed it would make it worth the price of admission.


On 10/26/16, Marquette, Ed <ed.marquette@...> wrote:
On particularly large and complex documents, windows + shift + r and
windows
+ ; are not reliable.
Often, one gets "no revisions."
The most reliable way is to move through the cocument, if it is a big
one, using the "next" function on the Review ribbon. Here, I am
talking about "next," not "accept and next." Once you have identified
the option on the ribbon, use right click to put it on the Quick Access Toolbar.
Now, for me, alt + 1 takes me to reach change (whether an insertion, a
deletion, or a comment."
By the way, I'm not sure whether it is Jaws post-windows 10 or Jaws
post Office 2010, but Jaws 16 and 17 don't work all that well with
track changes.
Relief has been promised in Jaws 18.



-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tim
Ford
Sent: Wednesday, October 26, 2016 8:15 AM
To: main@jfw.groups.io
Subject: A different way to review track changes

Hi All,

The string of notes on this topic used only the insert shift r
command, which is new to me. The way I pull up revisions is with the
windows key plus the ;. This brings up 4 items, comments, footnotes,
endnotes, and revisions. You hit enter on the one you want, and it
either tells you how many revisions, then gives you a nifty vertical
box with each revision numbered, who the author is, and what the
revision was. The same is available for comments, footnotes and
endnotes. If you hit enter, it takes you into that revision.
Pressing escape a time or two takes you out of that window, and you just repeat the windows ; command to get back in.

One other tip. For all versions of Word I have experienced, you can
go in and out of track change mode with a toggle command,
control-shift-e, presumably e for edits. Pressing that command takes
you in and out of seeing the revisions. Turning track changes off
gives you the clean version reflecting the revisions. You need to
have track changes on in order for the windows ; command to work.


The above seems to work fine with all versions of Word and JAWS.
Hopefully this information is useful.

Tim Ford





----------------------------------------------------------------------
This E-mail message is confidential, is intended only for the named
recipients above and may contain information that is privileged,
attorney work product or otherwise protected by applicable law. If you
have received this message in error, please notify the sender at
402-346-6000 and delete this E-mail message.
Thank you.




--
Kimberly




----------------------------------------------------------------------
This E-mail message is confidential, is intended only for the named recipients above and may contain information that is privileged, attorney work product or otherwise protected by applicable law. If you have received this message in error, please notify the sender at 402-346-6000 and delete this E-mail message.
Thank you.


Re: A different way to review track changes

George B <gbmagoo@...>
 

Cindy if you wish to send me the doc I can try with jaws 18

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marquette, Ed
Sent: October 26, 2016 06:46
To: main@jfw.groups.io
Subject: Re: A different way to review track changes

That's the word from Escalation at Freedom Scientific or whatever it is called now.
I plan to give JAWS 18 a try when I have some free time.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kimber Gardner
Sent: Wednesday, October 26, 2016 8:29 AM
To: main@jfw.groups.io
Subject: Re: A different way to review track changes

Hmm, I haven't investigated jaws 18 as yet, but if the track changes problem is really fixed it would make it worth the price of admission.


On 10/26/16, Marquette, Ed <ed.marquette@...> wrote:
On particularly large and complex documents, windows + shift + r and
windows
+ ; are not reliable.
Often, one gets "no revisions."
The most reliable way is to move through the cocument, if it is a big
one, using the "next" function on the Review ribbon. Here, I am
talking about "next," not "accept and next." Once you have identified
the option on the ribbon, use right click to put it on the Quick Access Toolbar.
Now, for me, alt + 1 takes me to reach change (whether an insertion, a
deletion, or a comment."
By the way, I'm not sure whether it is Jaws post-windows 10 or Jaws
post Office 2010, but Jaws 16 and 17 don't work all that well with
track changes.
Relief has been promised in Jaws 18.



-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tim
Ford
Sent: Wednesday, October 26, 2016 8:15 AM
To: main@jfw.groups.io
Subject: A different way to review track changes

Hi All,

The string of notes on this topic used only the insert shift r
command, which is new to me. The way I pull up revisions is with the
windows key plus the ;. This brings up 4 items, comments, footnotes,
endnotes, and revisions. You hit enter on the one you want, and it
either tells you how many revisions, then gives you a nifty vertical
box with each revision numbered, who the author is, and what the
revision was. The same is available for comments, footnotes and
endnotes. If you hit enter, it takes you into that revision.
Pressing escape a time or two takes you out of that window, and you just repeat the windows ; command to get back in.

One other tip. For all versions of Word I have experienced, you can
go in and out of track change mode with a toggle command,
control-shift-e, presumably e for edits. Pressing that command takes
you in and out of seeing the revisions. Turning track changes off
gives you the clean version reflecting the revisions. You need to
have track changes on in order for the windows ; command to work.


The above seems to work fine with all versions of Word and JAWS.
Hopefully this information is useful.

Tim Ford





----------------------------------------------------------------------
This E-mail message is confidential, is intended only for the named
recipients above and may contain information that is privileged,
attorney work product or otherwise protected by applicable law. If you
have received this message in error, please notify the sender at
402-346-6000 and delete this E-mail message.
Thank you.




--
Kimberly




----------------------------------------------------------------------
This E-mail message is confidential, is intended only for the named recipients above and may contain information that is privileged, attorney work product or otherwise protected by applicable law. If you have received this message in error, please notify the sender at 402-346-6000 and delete this E-mail message.
Thank you.


Re: A different way to review track changes

Marquette, Ed <ed.marquette@...>
 

That's the word from Escalation at Freedom Scientific or whatever it is called now.
I plan to give JAWS 18 a try when I have some free time.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kimber Gardner
Sent: Wednesday, October 26, 2016 8:29 AM
To: main@jfw.groups.io
Subject: Re: A different way to review track changes

Hmm, I haven't investigated jaws 18 as yet, but if the track changes problem is really fixed it would make it worth the price of admission.


On 10/26/16, Marquette, Ed <ed.marquette@...> wrote:
On particularly large and complex documents, windows + shift + r and
windows
+ ; are not reliable.
Often, one gets "no revisions."
The most reliable way is to move through the cocument, if it is a big
one, using the "next" function on the Review ribbon. Here, I am
talking about "next," not "accept and next." Once you have identified
the option on the ribbon, use right click to put it on the Quick Access Toolbar.
Now, for me, alt + 1 takes me to reach change (whether an insertion, a
deletion, or a comment."
By the way, I'm not sure whether it is Jaws post-windows 10 or Jaws
post Office 2010, but Jaws 16 and 17 don't work all that well with
track changes.
Relief has been promised in Jaws 18.



-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tim
Ford
Sent: Wednesday, October 26, 2016 8:15 AM
To: main@jfw.groups.io
Subject: A different way to review track changes

Hi All,

The string of notes on this topic used only the insert shift r
command, which is new to me. The way I pull up revisions is with the
windows key plus the ;. This brings up 4 items, comments, footnotes,
endnotes, and revisions. You hit enter on the one you want, and it
either tells you how many revisions, then gives you a nifty vertical
box with each revision numbered, who the author is, and what the
revision was. The same is available for comments, footnotes and
endnotes. If you hit enter, it takes you into that revision.
Pressing escape a time or two takes you out of that window, and you just repeat the windows ; command to get back in.

One other tip. For all versions of Word I have experienced, you can
go in and out of track change mode with a toggle command,
control-shift-e, presumably e for edits. Pressing that command takes
you in and out of seeing the revisions. Turning track changes off
gives you the clean version reflecting the revisions. You need to
have track changes on in order for the windows ; command to work.


The above seems to work fine with all versions of Word and JAWS.
Hopefully this information is useful.

Tim Ford





----------------------------------------------------------------------
This E-mail message is confidential, is intended only for the named
recipients above and may contain information that is privileged,
attorney work product or otherwise protected by applicable law. If you
have received this message in error, please notify the sender at
402-346-6000 and delete this E-mail message.
Thank you.




--
Kimberly




----------------------------------------------------------------------
This E-mail message is confidential, is intended only for the named recipients above and may contain information
that is privileged, attorney work product or otherwise protected by applicable law. If you have received this
message in error, please notify the sender at 402-346-6000 and delete this E-mail message.
Thank you.


Re: A different way to review track changes

Kimber Gardner
 

Hmm, I haven't investigated jaws 18 as yet, but if the track changes
problem is really fixed it would make it worth the price of admission.

On 10/26/16, Marquette, Ed <ed.marquette@...> wrote:
On particularly large and complex documents, windows + shift + r and windows
+ ; are not reliable.
Often, one gets "no revisions."
The most reliable way is to move through the cocument, if it is a big one,
using the "next" function on the Review ribbon. Here, I am talking about
"next," not "accept and next." Once you have identified the option on the
ribbon, use right click to put it on the Quick Access Toolbar.
Now, for me, alt + 1 takes me to reach change (whether an insertion, a
deletion, or a comment."
By the way, I'm not sure whether it is Jaws post-windows 10 or Jaws post
Office 2010, but Jaws 16 and 17 don't work all that well with track
changes.
Relief has been promised in Jaws 18.



-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tim Ford
Sent: Wednesday, October 26, 2016 8:15 AM
To: main@jfw.groups.io
Subject: A different way to review track changes

Hi All,

The string of notes on this topic used only the insert shift r command,
which is new to me. The way I pull up revisions is with the windows key
plus the ;. This brings up 4 items, comments, footnotes, endnotes, and
revisions. You hit enter on the one you want, and it either tells you how
many revisions, then gives you a nifty vertical box with each revision
numbered, who the author is, and what the revision was. The same is
available for comments, footnotes and endnotes. If you hit enter, it takes
you into that revision. Pressing escape a time or two takes you out of that
window, and you just repeat the windows ; command to get back in.

One other tip. For all versions of Word I have experienced, you can go in
and out of track change mode with a toggle command, control-shift-e,
presumably e for edits. Pressing that command takes you in and out of
seeing the revisions. Turning track changes off gives you the clean version
reflecting the revisions. You need to have track changes on in order for
the windows ; command to work.


The above seems to work fine with all versions of Word and JAWS. Hopefully
this information is useful.

Tim Ford





----------------------------------------------------------------------
This E-mail message is confidential, is intended only for the named
recipients above and may contain information
that is privileged, attorney work product or otherwise protected by
applicable law. If you have received this
message in error, please notify the sender at 402-346-6000 and delete this
E-mail message.
Thank you.



--
Kimberly


Re: A different way to review track changes

Marquette, Ed <ed.marquette@...>
 

On particularly large and complex documents, windows + shift + r and windows + ; are not reliable.
Often, one gets "no revisions."
The most reliable way is to move through the cocument, if it is a big one, using the "next" function on the Review ribbon. Here, I am talking about "next," not "accept and next." Once you have identified the option on the ribbon, use right click to put it on the Quick Access Toolbar.
Now, for me, alt + 1 takes me to reach change (whether an insertion, a deletion, or a comment."
By the way, I'm not sure whether it is Jaws post-windows 10 or Jaws post Office 2010, but Jaws 16 and 17 don't work all that well with track changes.
Relief has been promised in Jaws 18.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tim Ford
Sent: Wednesday, October 26, 2016 8:15 AM
To: main@jfw.groups.io
Subject: A different way to review track changes

Hi All,

The string of notes on this topic used only the insert shift r command, which is new to me. The way I pull up revisions is with the windows key plus the ;. This brings up 4 items, comments, footnotes, endnotes, and revisions. You hit enter on the one you want, and it either tells you how many revisions, then gives you a nifty vertical box with each revision numbered, who the author is, and what the revision was. The same is available for comments, footnotes and endnotes. If you hit enter, it takes you into that revision. Pressing escape a time or two takes you out of that window, and you just repeat the windows ; command to get back in.

One other tip. For all versions of Word I have experienced, you can go in and out of track change mode with a toggle command, control-shift-e, presumably e for edits. Pressing that command takes you in and out of seeing the revisions. Turning track changes off gives you the clean version reflecting the revisions. You need to have track changes on in order for the windows ; command to work.


The above seems to work fine with all versions of Word and JAWS. Hopefully this information is useful.

Tim Ford





----------------------------------------------------------------------
This E-mail message is confidential, is intended only for the named recipients above and may contain information
that is privileged, attorney work product or otherwise protected by applicable law. If you have received this
message in error, please notify the sender at 402-346-6000 and delete this E-mail message.
Thank you.


Re: A different way to review track changes

Cynthia Bruce
 

Sadly, I tried this. When I hit enter on revisions, it told me there were none. I am working around it, not ideal, but at least I am getting through it.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tim Ford
Sent: October 26, 2016 10:15 AM
To: main@jfw.groups.io
Subject: A different way to review track changes

Hi All,

The string of notes on this topic used only the insert shift r command, which is new to me. The way I pull up revisions is with the windows key plus the ;. This brings up 4 items, comments, footnotes, endnotes, and revisions. You hit enter on the one you want, and it either tells you how many revisions, then gives you a nifty vertical box with each revision numbered, who the author is, and what the revision was. The same is available for comments, footnotes and endnotes. If you hit enter, it takes you into that revision. Pressing escape a time or two takes you out of that window, and you just repeat the windows ; command to get back in.

One other tip. For all versions of Word I have experienced, you can go in and out of track change mode with a toggle command, control-shift-e, presumably e for edits. Pressing that command takes you in and out of seeing the revisions. Turning track changes off gives you the clean version reflecting the revisions. You need to have track changes on in order for the windows ; command to work.


The above seems to work fine with all versions of Word and JAWS. Hopefully this information is useful.

Tim Ford


Re: track changes, is there only one way to pull up a list of changes in a document?

Cynthia Bruce
 

Ha, now you know why sleeping is my current greatest challenge!

Talk soon,

C

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kimber Gardner
Sent: October 26, 2016 9:59 AM
To: main@jfw.groups.io
Subject: Re: track changes, is there only one way to pull up a list of changes in a document?

2010. But the problem exists in 2013 as well and has been around for a while. FS doesn't seem to care since I've reported the problem repeatedly and nothing ever gets done about it.

On 10/26/16, George B <gbmagoo@...> wrote:
I missed what version of word is she running

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Kimber Gardner
Sent: October 26, 2016 05:32
To: main@jfw.groups.io
Subject: Re: track changes, is there only one way to pull up a list of
changes in a document?

I've seen that problem. You know there are revisions but jaws just
doesn't recognize them. So frustrating!

What I do to work around the issue is set up hot keys for previous and
next revisions. This way you can use the hot keys to go from revision
to revision. It isn't great, but it's workable.

On 10/26/16, Cynthia Bruce <cynthia.bruce@...> wrote:
This is a really helpful set of instructions. Sadly, I tried using
the windows key and ', and I get the same message when I select revisions.
It says there are no revisions in the document - UGH

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Kimber Gardner
Sent: October 26, 2016 8:40 AM
To: main@jfw.groups.io
Subject: Re: track changes, is there only one way to pull up a list
of changes in a document?

Cynthia,

I'm pasting in the text of a post I saved from another list regarding
the use of track changes. I hope it's helpful.


Here are a few things you might be able to use. I had some notes
that I created some time ago that I am pasting below.


TRACKING REVISIONS USING JAWS AND WORD 2010

Turn tracking on by using CTRL+shift+E. If using insert+v to bring
up JAWS verbosity, press the letter T until the track changes choice
is found. Use spacebar to cycle between the choices JAWS gives for
what is spoken when revisions are found and then press enter key to
accept a choice. Choices include type, type and author, type, author
and date, as well as others.

You can use Windows key with semicolon in Word 2010 to bring up a
virtual window with options for viewing comments, footnotes, endnotes
or revisions.
The virtual window will have links to the comments, revisions, etc.
Use enter key on any link to move to the targeted reference. If a
change has been made in a document and the document has been saved
you can use the Windows key with semicolon and press enter on the
revision choice. If you follow the link to a revision you can read
the revision. You can then use the application key and the accept
and reject revision choices will be present. Press enter key on the
appropriate choice.

You can create a comment using the hotkey CTRL with Alt and M. If
that hotkey has been used by you for a different purpose then the New
Comment choice is under the review tab. You can list all comments in
the document by using CTRL with Shift and apostrophe. This will list
all reviewer's comments and you can arrow to the one you want to move
to and press enter key. Alt with Shift and apostrophe will read a
comment at the cursor position. You can list the comments and move
to one and then delete either that one or all in the document by
choosing the review tab and tabbing to the delete menu, which
contains those choices.

You can also use Windows key with semicolon and use the Footnote
choice to move to a footnote. Focus will go into the footnote pane
but you can use shift with function key 5 to move to your previous
position in the document.


If you do any coauthoring you can set the status bar to show such
things as "number of authors editing", "track changes", and
"document updates available."

When you move to a revision the contextual menu accessed by using
the application key gives choices for accepting or rejecting the revision.
If
you use the Accept and Reject options frequently for revisions, you
might want to consider setting those options to hotkeys. The
following steps can be followed to set a hotkey for the "accept and
move to next" action found on the lower part of the ribbon under the
review tab.

1. Press Alt followed by R followed by A to move focus to the
Accept and Move to Next option.
2. Press the Application key or Shift+f10. (Right click with the
mouse).
3. Use up arrow key a couple times and press enter key on the
"Customize the Ribbon" menu item.
4. Use tab key a couple of times to a list of commands and make
sure that the selected command is "Accept and Move to Next."
5. Use tab key one more time to move to the Customize button and
use the spacebar.
6. In the category list make sure you select the Review option.
Press R in the list of categories until that option is selected.
7. Use tab key to the Commands list box.
8. The first three options in the list have to do with accepting
changes.
Use up or down arrow key to select the one you want to use with a
hotkey.
9. Use tab key one time to find out if there is a current key
combination applied to the command. If not, use tab key again to the
edit box for the new hotkey.
10. Type in the hotkey combination. You might consider using
Alt+CTRL+Shift+A. Be sure to actually use the hotkey when entering
Alt+CTRL+Shift+what you
want to use in the edit box. In other words, hold down all three
modifier keys, press A and then release all keys.
11. Use tab key one more time and choose if you want to use this
key combination in the normal template so it will be available in all
new documents based on the normal template. Arrow down one time in
the Save In combo box if you want your changes to only be for the
current document.
12. Use tab key and find the Assign button. Use spacebar on that
button.
The new hotkey combination should appear in the list of currently
assigned keys. I have found that it sometimes takes a few seconds
before showing in the list.
13. Use tab key to the Close button and use spacebar.
14. Use tab key to the OK button and use spacebar.




On 10/26/16, George B <gbmagoo@...> wrote:
There is a spot in the ribbons where you need to turn track changes
on for them to be reconised.

I will look for you when I have some time

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Cynthia Bruce
Sent: October 26, 2016 04:28
To: main@jfw.groups.io
Subject: track changes, is there only one way to pull up a list of
changes in a document?

Good Morning All,

I just received a word document (Word 2010) from my supervisor, and
she used track changes rather extensively. As I read through with
JAWS (using JAWS 14), the only way of detecting specific revisions
on any line is to arrow through letter by letter on every line –
hardly efficient. I usually pull up a list of the changes in the
document using insert+shift+r…usually that is very helpful. When I
do that in this document, I receive a message that there are no
revisions in the document, but I know there are – I hear revision
when I read specific lines. So, any suggestions? Any and all help appreciated.

Thanks in advance,

Cynthia


--
Kimberly








--
Kimberly







--
Kimberly


A different way to review track changes

Tim Ford
 

Hi All,

The string of notes on this topic used only the insert shift r command, which is new to me. The way I pull up revisions is with the windows key plus the ;. This brings up 4 items, comments, footnotes, endnotes, and revisions. You hit enter on the one you want, and it either tells you how many revisions, then gives you a nifty vertical box with each revision numbered, who the author is, and what the revision was. The same is available for comments, footnotes and endnotes. If you hit enter, it takes you into that revision. Pressing escape a time or two takes you out of that window, and you just repeat the windows ; command to get back in.

One other tip. For all versions of Word I have experienced, you can go in and out of track change mode with a toggle command, control-shift-e, presumably e for edits. Pressing that command takes you in and out of seeing the revisions. Turning track changes off gives you the clean version reflecting the revisions. You need to have track changes on in order for the windows ; command to work.


The above seems to work fine with all versions of Word and JAWS. Hopefully this information is useful.

Tim Ford

57821 - 57840 of 100874