Date   

Re: Google Docs & Moodle

Marianne Denning
 

Yes, both work with JAWS but they can still be inaccessible depending on how they are used.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of clelands@...
Sent: Tuesday, October 4, 2016 10:31 AM
To: main@jfw.groups.io
Subject: Google Docs & Moodle

 

I'm working to figure out the best option for a student who will be needing access to Google docs and Moodle in his classrooms.  I've read that Jaws now works with google docs -- is that correct?  And I can't find any information about moodle -- any experience with this?


Re: How to get a character count in a Word document?

Onwardbob
 

Neat trick, thanks

BOB SOUTAR…ONWARD THRU THE FOG

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Emmanuel Bassey
Sent: Tuesday, October 04, 2016 6:04 PM
To: main@jfw.groups.io
Subject: Re: How to get a character count in a Word document?

Hi Tim,
While your document is open (running), tap F6 key until you hear
'status bar' - it comes on after your second tap. Then use your down
arrow key and you will hear the page number after which the next is
the word count you are looking for.
Cheers,

Emmanuel

On 10/5/16, Tim Ford <ttford@gmail.com> wrote:
Hi All,

I need to track the character count, since this project has a 2,500
character limit. I am running Office 2010. How do I do that with JAWS?

Tim Ford

--
Emmanuel Bassey (MBBCh.)
Master of Disability Policy and Practice
Faculty of Medicine
Flinders University
Bedford Park, Australia.
Ph: +61469869938
email: bass0081@flinders.edu.au


Re: How to get a character count in a Word document?

Carolyn Arnold <4carolyna@...>
 

Thank you for the tip about F6; that is helpful. There is always one more thing to learn that can help a lot.

Bye for now,

Carolyn

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Emmanuel Bassey
Sent: Tuesday, October 4, 2016 9:04 PM
To: main@jfw.groups.io
Subject: Re: How to get a character count in a Word document?

Hi Tim,
While your document is open (running), tap F6 key until you hear 'status bar' - it comes on after your second tap. Then use your down arrow key and you will hear the page number after which the next is the word count you are looking for.
Cheers,

Emmanuel

On 10/5/16, Tim Ford <ttford@gmail.com> wrote:
Hi All,

I need to track the character count, since this project has a 2,500
character limit. I am running Office 2010. How do I do that with JAWS?

Tim Ford

--
Emmanuel Bassey (MBBCh.)
Master of Disability Policy and Practice Faculty of Medicine Flinders University Bedford Park, Australia.
Ph: +61469869938
email: bass0081@flinders.edu.au


Re: Web Site Access Issue With Firefox 49

 

Tom,

            If this isn't a JAWS-related problem it could also very well be an add-on related problem.

            If you have any sighted assistance or vision to try loading the page you're having trouble with when JAWS is off, not paused, that would give you the answer as to whether JAWS is triggering the issue on your system.  If it's not JAWS, then turn it back on and start disabling your add-ons/extensions one-by-one to see if this eventually stops.

            Another option would be to start Firefox with all add-ons disabled, which can be done by going to the Help menu and selecting "Restart with add-ons disabled," first with JAWS on to see if that stops the issue and, if it doesn't, with JAWS off.

            If you've still got a problem with both JAWS and add-ons off I'd first suggest clearing the Firefox browser cache to see if that fixes it.  If not I'd try reinstalling Firefox, JAWS, or both to see if that fixes it.

            'Tis the nature of diagnostic troubleshooting.
--
Brian


A great many people think they are thinking when they are merely rearranging their prejudices.

         ~ William James


Re: Web Site Access Issue With Firefox 49

Carolyn Arnold <4carolyna@...>
 

Based on my experience with recently installed Firefox, I
think it is an access problem, and one that I am not at all
happy with. However, people have said that Internet Explorer
is going to go, also that Firefox is one of the most popular
browsers.

Bye for now,

Carolyn

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On
Behalf Of Tom Behler
Sent: Tuesday, October 4, 2016 9:35 PM
To: main@jfw.groups.io
Subject: Web Site Access Issue With Firefox 49

Hello, everyone.



I hope this is not considered off topic, but I'm not sure if
the following issue is related to Firefox or Jaws.



Basically, I'm having trouble accessing a web site
containing tutorials for the iPhone.



The web site is:



www.voiceover-easy.net <http://www.voiceover-easy.net>



When I try to access the web site via Firefox (version
49.0.1), I get the error message below. I don't get this
message when trying to access the web site with Internet
Explorer 11.



I'm wondering if this is a Jaws of Firefox issue, and how to
correct the problem?





Here's the error message I get when using Firefox:





Input string was not in a correct format.



Server Error in '/' Application.

------------------------------------------------------------
--------------------



Input string was not in a correct format.

Description: An unhandled exception occurred during the
execution of the current web request. Please review the
stack trace for more information about

the error and where it originated in the code.



Exception Details: System.FormatException: Input string was
not in a correct format.



Source Error:



An unhandled exception was generated during the execution of
the current web request. Information regarding the origin
and location of the exception can

be identified using the exception stack trace below.

Stack Trace:





[FormatException: Input string was not in a correct format.]


Microsoft.VisualBasic.CompilerServices.Conversions.ParseDoub
le(String Value, NumberFormatInfo NumberFormat) +213


Microsoft.VisualBasic.CompilerServices.Conversions.ToDouble(
String Value, NumberFormatInfo NumberFormat) +63



[InvalidCastException: Conversion from string "iOS " to type
'Double' is not valid.]


Microsoft.VisualBasic.CompilerServices.Conversions.ToDouble(
String Value, NumberFormatInfo NumberFormat) +226


Microsoft.VisualBasic.CompilerServices.Operators.AddObject(O
bject Left, Object Right) +478

VoE.iOS_selector.ddlIOSVersion_PreRender(Object sender,
EventArgs e) in
U:\VoE\VoE\WebControls\iOS_selector.ascx.vb:11

System.Web.UI.Control.OnPreRender(EventArgs e) +9776194


System.Web.UI.WebControls.ListControl.OnPreRender(EventArgs
e) +32

System.Web.UI.Control.PreRenderRecursiveInternal() +88

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean
includeStagesAfterAsyncPoint) +4775



------------------------------------------------------------
--------------------



Version Information: Microsoft .NET Framework
Version:4.0.30319; ASP.NET Version:4.6.1069.1



Dr. Tom Behler from Michigan


Re: FW: Web Site Access Issue With Firefox 49

Mario
 

using Firefox 49.0.1, I don't experience the message you describe. I
realize someone said the problem is with FF, but I would email
voiceover-easy and see what they say.

------- Original Message --------
From: Tom Behler [mailto:tombehler@gmail.com]
Sent: Wednesday, Oct 5, 2016 9:02 AM EST
To: main@jfw.groups.io
Subject: FW: Web Site Access Issue With Firefox 49

Hello.



I don’t mean to be a pain by re-posting this, but could really use some
input on resolving the issue described below.



Wonder if anyone else has seen it?



Dr. Tom Behler from Michigan





*From:* Tom Behler [mailto:tombehler@gmail.com]
*Sent:* Tuesday, October 04, 2016 9:35 PM
*To:* jfw list <jfw@groups.io>
*Subject:* Web Site Access Issue With Firefox 49



Hello, everyone.



I hope this is not considered off topic, but I’m not sure if the
following issue is related to Firefox or Jaws.



Basically, I’m having trouble accessing a web site containing tutorials
for the iPhone.



The web site is:



www.voiceover-easy.net <http://www.voiceover-easy.net>



When I try to access the web site via Firefox (version 49.0.1), I get
the error message below. I don’t get this message when trying to access
the web site with Internet Explorer 11.



I’m wondering if this is a Jaws of Firefox issue, and how to correct the
problem?





Here’s the error message I get when using Firefox:





Input string was not in a correct format.



Server Error in '/' Application.

--------------------------------------------------------------------------------



Input string was not in a correct format.

Description: An unhandled exception occurred during the execution of the
current web request. Please review the stack trace for more information
about

the error and where it originated in the code.



Exception Details: System.FormatException: Input string was not in a
correct format.



Source Error:



An unhandled exception was generated during the execution of the current
web request. Information regarding the origin and location of the
exception can

be identified using the exception stack trace below.

Stack Trace:





[FormatException: Input string was not in a correct format.]

Microsoft.VisualBasic.CompilerServices.Conversions.ParseDouble(String
Value, NumberFormatInfo NumberFormat) +213

Microsoft.VisualBasic.CompilerServices.Conversions.ToDouble(String
Value, NumberFormatInfo NumberFormat) +63



[InvalidCastException: Conversion from string "iOS " to type 'Double' is
not valid.]

Microsoft.VisualBasic.CompilerServices.Conversions.ToDouble(String
Value, NumberFormatInfo NumberFormat) +226

Microsoft.VisualBasic.CompilerServices.Operators.AddObject(Object
Left, Object Right) +478

VoE.iOS_selector.ddlIOSVersion_PreRender(Object sender, EventArgs e)
in U:\VoE\VoE\WebControls\iOS_selector.ascx.vb:11

System.Web.UI.Control.OnPreRender(EventArgs e) +9776194

System.Web.UI.WebControls.ListControl.OnPreRender(EventArgs e) +32

System.Web.UI.Control.PreRenderRecursiveInternal() +88

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4775



--------------------------------------------------------------------------------



Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET
Version:4.6.1069.1



Dr. Tom Behler from Michigan


Re: Google Docs & Moodle

 

I had a client who was a graduate student at an institution that used Moodle and we had no problem accessing it via JAWS.   We weren't using Google Drive directly, but I just did a really quick and dirty run through my own Google Drive using the Chrome browser and NVDA and it appears to be accessible.  Navigation behaved predictably, I could open folders, etc.
--
Brian


A great many people think they are thinking when they are merely rearranging their prejudices.

         ~ William James


Re: Web Site Access Issue With Firefox 49

 

And I'll report the exact opposite of Anil.  I have absolutely no problem loading this website in Firefox 49.0.1, Chrome (latest version), MS-Edge, or IE11.

Everything points to a JAWS problem (or JAWS script problem).
--
Brian


A great many people think they are thinking when they are merely rearranging their prejudices.

         ~ William James


How To Get Rid Of Clickable Announcement When Reading PDF Files On Line

Tom Behler
 

Hello, again, everyone.

 

Recently, I have noticed that when I read PDF files on line, I get an announcement of clickable links after several words, or possibly a line or two, of the document.

 

This seems to be happening more and more often now, and makes documents basically unreadable.

 

How can I get rid of this very anoying clickable announcement.

 

I’m using Jaws 17 and Windows 7 here, and use Firefox as my main internet browser.

 

Dr.  Tom Behler from Michigan

 

 


FW: Web Site Access Issue With Firefox 49

Tom Behler
 

Hello.

 

I don’t mean to be a pain by re-posting this, but could really use some input on resolving the issue described below.

 

Wonder if anyone else has seen it?

 

Dr.  Tom Behler from Michigan

 

 

From: Tom Behler [mailto:tombehler@...]
Sent: Tuesday, October 04, 2016 9:35 PM
To: jfw list <jfw@groups.io>
Subject: Web Site Access Issue With Firefox 49

 

Hello, everyone.

 

I hope this is not considered off topic, but I’m not sure if the following issue is related to Firefox or Jaws.

 

Basically, I’m having trouble accessing a web site containing tutorials for the iPhone.

 

The web site is:

 

www.voiceover-easy.net

 

When I try to access the web site via Firefox (version 49.0.1), I get the error message below.  I don’t get this message when trying to access the web site with Internet Explorer 11.

 

I’m wondering if this is a Jaws of Firefox issue, and how to correct the problem?

 

 

Here’s the error message I get when using Firefox:

 

 

Input string was not in a correct format.

 

Server Error in '/' Application.

--------------------------------------------------------------------------------

 

Input string was not in a correct format.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about

the error and where it originated in the code.

 

Exception Details: System.FormatException: Input string was not in a correct format.

 

Source Error:

 

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can

be identified using the exception stack trace below.

Stack Trace:

 

 

[FormatException: Input string was not in a correct format.]

   Microsoft.VisualBasic.CompilerServices.Conversions.ParseDouble(String Value, NumberFormatInfo NumberFormat) +213

   Microsoft.VisualBasic.CompilerServices.Conversions.ToDouble(String Value, NumberFormatInfo NumberFormat) +63

 

[InvalidCastException: Conversion from string "iOS " to type 'Double' is not valid.]

   Microsoft.VisualBasic.CompilerServices.Conversions.ToDouble(String Value, NumberFormatInfo NumberFormat) +226

   Microsoft.VisualBasic.CompilerServices.Operators.AddObject(Object Left, Object Right) +478

   VoE.iOS_selector.ddlIOSVersion_PreRender(Object sender, EventArgs e) in U:\VoE\VoE\WebControls\iOS_selector.ascx.vb:11

   System.Web.UI.Control.OnPreRender(EventArgs e) +9776194

   System.Web.UI.WebControls.ListControl.OnPreRender(EventArgs e) +32

   System.Web.UI.Control.PreRenderRecursiveInternal() +88

   System.Web.UI.Control.PreRenderRecursiveInternal() +160

   System.Web.UI.Control.PreRenderRecursiveInternal() +160

   System.Web.UI.Control.PreRenderRecursiveInternal() +160

   System.Web.UI.Control.PreRenderRecursiveInternal() +160

   System.Web.UI.Control.PreRenderRecursiveInternal() +160

   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4775

 

--------------------------------------------------------------------------------

 

Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.6.1069.1

 

Dr.  Tom Behler from Michigan

 


Re: Web Site Access Issue With Firefox 49

Tom Behler
 

How do I report this to Firefox?

Have never done that before, and want to be sure I do it correctly.

Dr. Tom Behler from Michigan

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of anil adivishnu
Sent: Wednesday, October 05, 2016 12:58 AM
To: main@jfw.groups.io
Subject: Re: Web Site Access Issue With Firefox 49

as far as i know this is not a Jaws problem it is a firefox problem plees report to the firefox comunity they will fix this problem soon i reported many problems to the firefox and they have fixed in 2 or 3 versions after so i hope your problem also get fixed thanks

On 10/5/16, Tom Behler <tombehler@gmail.com> wrote:
Hello, everyone.



I hope this is not considered off topic, but I'm not sure if the
following issue is related to Firefox or Jaws.



Basically, I'm having trouble accessing a web site containing
tutorials for the iPhone.



The web site is:



www.voiceover-easy.net <http://www.voiceover-easy.net>



When I try to access the web site via Firefox (version 49.0.1), I get
the error message below. I don't get this message when trying to
access the web site with Internet Explorer 11.



I'm wondering if this is a Jaws of Firefox issue, and how to correct
the problem?





Here's the error message I get when using Firefox:





Input string was not in a correct format.



Server Error in '/' Application.

----------------------------------------------------------------------
------
----



Input string was not in a correct format.

Description: An unhandled exception occurred during the execution of
the current web request. Please review the stack trace for more
information about

the error and where it originated in the code.



Exception Details: System.FormatException: Input string was not in a
correct format.



Source Error:



An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of
the exception can

be identified using the exception stack trace below.

Stack Trace:





[FormatException: Input string was not in a correct format.]


Microsoft.VisualBasic.CompilerServices.Conversions.ParseDouble(String
Value, NumberFormatInfo NumberFormat) +213

Microsoft.VisualBasic.CompilerServices.Conversions.ToDouble(String
Value,
NumberFormatInfo NumberFormat) +63



[InvalidCastException: Conversion from string "iOS " to type 'Double'
is not valid.]

Microsoft.VisualBasic.CompilerServices.Conversions.ToDouble(String
Value,
NumberFormatInfo NumberFormat) +226

Microsoft.VisualBasic.CompilerServices.Operators.AddObject(Object
Left, Object Right) +478

VoE.iOS_selector.ddlIOSVersion_PreRender(Object sender, EventArgs
e) in
U:\VoE\VoE\WebControls\iOS_selector.ascx.vb:11

System.Web.UI.Control.OnPreRender(EventArgs e) +9776194

System.Web.UI.WebControls.ListControl.OnPreRender(EventArgs e) +32

System.Web.UI.Control.PreRenderRecursiveInternal() +88

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
+4775



----------------------------------------------------------------------
------
----



Version Information: Microsoft .NET Framework Version:4.0.30319;
ASP.NET
Version:4.6.1069.1



Dr. Tom Behler from Michigan




Re: How to get a character count in a Word document?

Emmanuel Bassey <dr.emmabassey@...>
 

Hi Tim,
While your document is open (running), tap F6 key until you hear
'status bar' - it comes on after your second tap. Then use your down
arrow key and you will hear the page number after which the next is
the word count you are looking for.
Cheers,

Emmanuel

On 10/5/16, Tim Ford <ttford@gmail.com> wrote:
Hi All,

I need to track the character count, since this project has a 2,500
character limit. I am running Office 2010. How do I do that with JAWS?

Tim Ford
--
Emmanuel Bassey (MBBCh.)
Master of Disability Policy and Practice
Faculty of Medicine
Flinders University
Bedford Park, Australia.
Ph: +61469869938
email: bass0081@flinders.edu.au


Google Docs & Moodle

clelands@...
 

I'm working to figure out the best option for a student who will be needing access to Google docs and Moodle in his classrooms.  I've read that Jaws now works with google docs -- is that correct?  And I can't find any information about moodle -- any experience with this?


Re: the download dialogue box doesn't open in google group

anil adivishnu
 

hello you will not get any dylogbox in google chrom the is been
downloaded in the baground press control j to view download progress
hope this helps thanks

On 10/5/16, Ryan Coverdell <rmcover74@gmail.com> wrote:
I cannot bring up the download dialogue box in google chrome. The one that
asks me to save or open the file. I access it in internet explorer but not
google chrome. This means, for example, that I cannot actually download a
bookshare.org book using google chrome. How do I activate the dialogue box?
Or how do I avoid it altogether in internet explorer, too?

Regards,

Ryan Coverdell


the download dialogue box doesn't open in google group

Ryan Coverdell
 

I cannot bring up the download dialogue box in google chrome. The one that asks me to save or open the file. I access it in internet explorer but not google chrome. This means, for example, that I cannot actually download a bookshare.org book using google chrome. How do I activate the dialogue box? Or how do I avoid it altogether in internet explorer, too?
 
Regards,
 
Ryan Coverdell


Re: Web Site Access Issue With Firefox 49

anil adivishnu
 

as far as i know this is not a Jaws problem it is a firefox problem
plees report to the firefox comunity they will fix this problem soon i
reported many problems to the firefox and they have fixed in 2 or 3
versions after so i hope your problem also get fixed thanks

On 10/5/16, Tom Behler <tombehler@gmail.com> wrote:
Hello, everyone.



I hope this is not considered off topic, but I'm not sure if the following
issue is related to Firefox or Jaws.



Basically, I'm having trouble accessing a web site containing tutorials for
the iPhone.



The web site is:



www.voiceover-easy.net <http://www.voiceover-easy.net>



When I try to access the web site via Firefox (version 49.0.1), I get the
error message below. I don't get this message when trying to access the
web
site with Internet Explorer 11.



I'm wondering if this is a Jaws of Firefox issue, and how to correct the
problem?





Here's the error message I get when using Firefox:





Input string was not in a correct format.



Server Error in '/' Application.

----------------------------------------------------------------------------
----



Input string was not in a correct format.

Description: An unhandled exception occurred during the execution of the
current web request. Please review the stack trace for more information
about

the error and where it originated in the code.



Exception Details: System.FormatException: Input string was not in a
correct
format.



Source Error:



An unhandled exception was generated during the execution of the current
web
request. Information regarding the origin and location of the exception can

be identified using the exception stack trace below.

Stack Trace:





[FormatException: Input string was not in a correct format.]

Microsoft.VisualBasic.CompilerServices.Conversions.ParseDouble(String
Value, NumberFormatInfo NumberFormat) +213

Microsoft.VisualBasic.CompilerServices.Conversions.ToDouble(String
Value,
NumberFormatInfo NumberFormat) +63



[InvalidCastException: Conversion from string "iOS " to type 'Double' is
not
valid.]

Microsoft.VisualBasic.CompilerServices.Conversions.ToDouble(String
Value,
NumberFormatInfo NumberFormat) +226

Microsoft.VisualBasic.CompilerServices.Operators.AddObject(Object Left,
Object Right) +478

VoE.iOS_selector.ddlIOSVersion_PreRender(Object sender, EventArgs e) in
U:\VoE\VoE\WebControls\iOS_selector.ascx.vb:11

System.Web.UI.Control.OnPreRender(EventArgs e) +9776194

System.Web.UI.WebControls.ListControl.OnPreRender(EventArgs e) +32

System.Web.UI.Control.PreRenderRecursiveInternal() +88

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Control.PreRenderRecursiveInternal() +160

System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4775



----------------------------------------------------------------------------
----



Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET
Version:4.6.1069.1



Dr. Tom Behler from Michigan




Web Site Access Issue With Firefox 49

Tom Behler
 

Hello, everyone.

 

I hope this is not considered off topic, but I’m not sure if the following issue is related to Firefox or Jaws.

 

Basically, I’m having trouble accessing a web site containing tutorials for the iPhone.

 

The web site is:

 

www.voiceover-easy.net

 

When I try to access the web site via Firefox (version 49.0.1), I get the error message below.  I don’t get this message when trying to access the web site with Internet Explorer 11.

 

I’m wondering if this is a Jaws of Firefox issue, and how to correct the problem?

 

 

Here’s the error message I get when using Firefox:

 

 

Input string was not in a correct format.

 

Server Error in '/' Application.

--------------------------------------------------------------------------------

 

Input string was not in a correct format.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about

the error and where it originated in the code.

 

Exception Details: System.FormatException: Input string was not in a correct format.

 

Source Error:

 

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can

be identified using the exception stack trace below.

Stack Trace:

 

 

[FormatException: Input string was not in a correct format.]

   Microsoft.VisualBasic.CompilerServices.Conversions.ParseDouble(String Value, NumberFormatInfo NumberFormat) +213

   Microsoft.VisualBasic.CompilerServices.Conversions.ToDouble(String Value, NumberFormatInfo NumberFormat) +63

 

[InvalidCastException: Conversion from string "iOS " to type 'Double' is not valid.]

   Microsoft.VisualBasic.CompilerServices.Conversions.ToDouble(String Value, NumberFormatInfo NumberFormat) +226

   Microsoft.VisualBasic.CompilerServices.Operators.AddObject(Object Left, Object Right) +478

   VoE.iOS_selector.ddlIOSVersion_PreRender(Object sender, EventArgs e) in U:\VoE\VoE\WebControls\iOS_selector.ascx.vb:11

   System.Web.UI.Control.OnPreRender(EventArgs e) +9776194

   System.Web.UI.WebControls.ListControl.OnPreRender(EventArgs e) +32

   System.Web.UI.Control.PreRenderRecursiveInternal() +88

   System.Web.UI.Control.PreRenderRecursiveInternal() +160

   System.Web.UI.Control.PreRenderRecursiveInternal() +160

   System.Web.UI.Control.PreRenderRecursiveInternal() +160

   System.Web.UI.Control.PreRenderRecursiveInternal() +160

   System.Web.UI.Control.PreRenderRecursiveInternal() +160

   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4775

 

--------------------------------------------------------------------------------

 

Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.6.1069.1

 

Dr.  Tom Behler from Michigan

 


Re: Latest Jaws 18 Beta Download Links & What's New

majno <alfred.hl@...>
 

Thanks i have reported the bug there.   


El 04-Oct-16 a las 8:10 PM, Sieghard Weitzel escribió:

Hi,

 

If you go to www.FreedomScientific.com and click on the Jaws 18 Public Beta link you can then easily find the form for reporting bugs. To make it easier, here is a direct link for said form:

 

https://www.freedomscientific.com/Forms/JAWSBetaReport

 

Regards,

Sieghard

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of majno
Sent: Tuesday, October 04, 2016 5:42 PM
To: main@jfw.groups.io
Subject: Re: Latest Jaws 18 Beta Download Links & What's New

 

Here some bugs with the new feature to "lower the audio while jaws s speaking"

When the audio is reduced and jaws speaking is turned off the volume never turns up again.

 

i don't know how and where submit bugs so i leave it here in case anybodywnats submit.

 

El 04-Oct-16 a las 5:54 PM, Mike B. escribió:

Hi All,

 

Below are the direct download links for the latest Jaws 18 Beta version, J18.0.1811 (Public Beta 2), & what's new in this update.

 

32 Bit:

 

 

64 Bit:

 

 

Enhancements in JAWS 18.0.1811 (Public Beta 2)

 

The following is a list of improvements made between the first Public Beta and Public Beta 2. Note that while many customer reported enhancements are included
in this release, the following is a list of more notable changes.

 

Lower the Audio from Other Programs While JAWS is Speaking

 

In Windows 8 and later, you can now specify that the volume of audio from other programs be lowered while JAWS is speaking using the Eloquence or Vocalizer
Expressive synthesizers as well as any SAPI5 synthesizer. This is commonly known as audio ducking. For example, if you are listening to music or playing
a video and JAWS begins talking, the volume of the music or video will be slightly lowered so you can comfortably hear JAWS and then raised back to its
current level when JAWS stops talking.

 

For JAWS users with a braille display, you can also choose to mute JAWS speech (INSERT+SPACEBAR, S) while listening to audio from other programs and still
use JAWS with braille output only, without the audio from the other programs being reduced.

 

By default, audio remains at the same volume as JAWS speech. To change this, there are two ways. The easiest way is to open the Startup Wizard from the
JAWS Help menu and select the Lower the volume of other programs while JAWS is speaking checkbox located on the Speech Settings page.

 

Alternatively, you can change this option through Settings Center by doing the following:

 

list of 5 items
1. Press INSERT+F2, and select Settings Center.
2. Press CTRL+SHIFT+D to load the JAWS default settings.
3. In the Search edit box, type "volume" without the quotes.
4. Press DOWN ARROW to move to "Lower the volume of other programs while JAWS is speaking" in the filtered search results in the tree view.
5. Press SPACEBAR to toggle this option.
list end

 

More Dynamic Braille Auto Advance Mode

 

Auto Advance Mode is equivalent to the Say All command for braille readers and has been available in JAWS for many years. After performing the appropriate
command on your braille display (left and right selector buttons on the Focus series displays), the braille display is automatically panned at a specific
speed through an entire document, automatically skipping over blank segments and blank lines. In prior versions, users could configure how long JAWS paused
before automatically panning the display. Once configured, the display would pan at the same speed regardless of how much information was on the display,
so most users would set the timer for optimal reading when the display was full. However, if the display panned to a short line containing only a few words
with the remaining cells being empty, which could occur more frequently with larger displays such as those with 40 or 80 cells, this could be inconvenient
as the user would have to wait for the display to advance which could cause an interruption with reading.

 

To improve the reading experience when using Auto Advance Mode, JAWS now pans faster or slower depending on the length of the current braille line. The
display will pan faster for short lines so you can instantly move to the next segment without having to wait once you have finished reading, but will pan
slower for longer lines up to a maximum length of time which is used when the display is full. This maximum value can be configured through Settings Center
using the new Auto Advance Maximum Interval option. By default, it is set to 5000 milliseconds, or five seconds.

 

For example, if you have an 80 cell display and the current braille line takes up the majority of the display, JAWS will pan the display after five seconds.
If the display pans to a short line containing only a few words and the remaining cells are blank, JAWS will pan the display within a couple seconds.

 

Improved Performance when Using JAWS and ZoomText Together

 

JAWS 18 introduces greatly improved interoperability with the soon to be released ZoomText 11. Users of both these industry leading products will experience
more seemless operation when running JAWS 18 and ZoomText 11 together regardless of the order in which they are installed as well as which product is started
first.

 

When JAWS 18 and ZoomText 11 are running together, users should note the following:

 

list of 4 items
• JAWS handles all speech functions except for ZoomText's App Reader feature and speech directly from ZoomText , such as ZoomText scripts.
• All ZoomText magnification features will continue to work as expected. In addition, ZoomText will now visually highlight and track during a JAWS Say
All, or when navigating using the Virtual Cursor.
• If there is a keystroke conflict, the JAWS keystroke is used instead. Otherwise, JAWS and ZoomText keystrokes will continue to work as expected.
• ZoomText handles all touch related functions.
list end

 

Since JAWS takes over all speech functions when running with ZoomText, this also includes mouse echo. If you want the mouse to echo as it is moved, you
will need to enable mouse echo in JAWS as it is off by default. The easiest way is to press the layered keystroke, INSERT+SPACEBAR, E, O. However, this
is only temporary and will revert back to off if JAWS is restarted. If you intend on using mouse echo all the time, you can permanently enable it by doing
the following:

 

list of 3 items
1. Press INSERT+F2, and select Settings Center.
2. Press CTRL+SHIFT+D to load the JAWS default settings.
3. From the tree view, expand the Mouse Echo group and press SPACEBAR on Enable Mouse Echo.
list end

 

Touch Improvements
list of 9 items
• JAWS touch gestures are now included in the Command Search feature (INSERT+SPACEBAR, J). If you search for a command that can be performed using a keystgroke
or a gesture, both the keystroke and gesture are displayed in the search results. You can also search for gesture-specific commands, such as toggling the
Touch Keyboard, or cycling through Touch Navigation, Text Reading, or Speech Settings gesture modes. The JAWS Command Search only includes gestures if
JAWS detects that it is running on a touch screen enabled device.
• Addressed issues with using gestures to switch to an application in the task switching window that displays when you swipe from the left edge of the
screen. When the task switcher opens, flick left or right through the list of running applications and when you locate the one you want, double tap it
to move focus in to that app.
• Improved the experience when using touch gestures to log into Windows. If the Login screen is active and focus is on the Password edit field, performing
a double tap will immediately open the touch keyboard allowing you to enter your password. Otherwise, flick right or explore until you locate the Password
edit field and then double tap to set focus and open the touch keyboard.
• JAWS no longer repeats the password label field multiple times on the Windows 10 Login screen.
• In response to user feedback, the default typing mode for the touch keyboard is now Touch Typing, which means a key is typed as soon as the finger is
lifted from the keyboard button, or you perform a split tap.
• If the gesture mode is set to Text Reading, you can now perform a four-finger swipe down to begin a Say All in the currently open document, similar to
pressing INSERT+DOWN ARROW on the keyboard. To stop reading, tap anywhere on the screen.
• In response to customer requests, added a new option to the Touch Cursor group in Quick Settings that allows you to choose the element type that is navigated
to when using the flick up and flick down gestures. The available choices are Regions (selected by default), Headings, List Items, Buttons, Links, Groups,
and Form Controls. Note that not all apps support these navigation types, they are typically available in modern apps and web applications.
• If you perform a JAWS touch gesture and then do a five-finger rotate to turn off all JAWS gestures, resolved an issue where Windows-specific gestures
would no longer work until you restarted JAWS.
• Addressed an issue where the Minimize, Maximize, and Close buttons in the title bar of an application were not being announced by JAWS when exploring
the screen.
list end

 

Google Docs
list of 6 items
• You can now type text into a document using Contracted Braille.
• Added speech and braille support for navigating tables inserted into documents.
• Resolved several issues with JAWS not detecting live region updates.
• Addressed issues where JAWS was announcing extraneous information when opening menus.
• Resolved several issues with menus and focus.
• Resolved multiple issues where focus would unexpectedly jump to other places while editing a document.
list end

 

JAWS
list of 7 items
• Addressed an issue where Settings Center changes made after migrating or importing settings were not taking affect unless JAWS was restarted.
• If the mouse echo feature is disabled, addressed an issue where speech was still being interupted when moving the physical mouse.
• In response to customer feedback, updated the Adding Special Symbols help topic with the correct location for the Eloq.sbl file.
• If a Windows 10 alarm goes off, addressed an issue where the volume of JAWS speech would unexpectedly be lowered to an unusable level, making it difficult
for a speech-only user to turn off the alarm.
• Addressed an issue that was observed in multiple applications where JAWS was reading the wrong word when pressing CTRL+BACKSPACE to delete the prior
word.
• Added a new Hebrew Computer Braille table. You can set this as a preferred table or set it as the primary table through the Braille Tables dialog box,
accessed by selecting the Computer Braille Tables option in Settings Center. Braille output must be set to Computer Braille before you can make this change.
• A customer using the Spanish version of JAWS reported several English messages and keystroke conflicts. These have been resolved.
list end

 

Microsoft Outlook
list of 5 items
• Addressed an issue with Outlook 2016 where JAWS was not reading all of the info in the meeting attendees list.
• If a calendar appointment lasts for more than one day, resolved a customer reported issue where JAWS would not indicate the appointment after moving
past the first day.
• If a calendar event is set to all day in Outlook 2013, resolved a reported issue with JAWS not reading the end date.
• Addressed a reported issue with the Outlook 2016 Office Theme combo box, located in the Options dialog box, not being displayed properly in braille.
• Addressed a reported issue with the INSERT+F keystroke to read the font and point size not saying anything when used in the message list in Outlook 2013
and 2016.
list end

 

Microsoft Word
list of 2 items
• Resolved an issue where JAWS would unexpectedly restart and Word 2013 would become unresponsive when attempting to insert a comment.
• When using CTRL+PAGE UP and CTRL+PAGE DOWN to switch pages, addressed a reported issue where JAWS was announcing the line from the prior page.
list end

 

Web Browsers
list of 7 items
• Added support for several ARIA 1.1 features including the aria-modal, aria-current, and aria-placeholder attributes, as well as support for partially
visible tables.
• When navigating to links in Firefox with the mouse and the new mouse echo feature is enabled, resolved an issue where JAWS was not  announcing the text
of the link as it appears on the web page.
• Addressed an issue in Firefox where pressing INSERT+R was not toggling Virtual Cursor restriction as expected in web-based dialog boxes.
• If END is pressed in an edit field in Google Chrome, addressed an issue where text in an edit field was no longer indicated in speech or braille.
• Resolved an issue with certain edit combos not being identified correctly in the virtual buffer in both Firefox and Chrome.
• Resolved an issue where tab controls would appear twice in the virtual buffer in Chrome.
• Addressed an issue with heading level indication in Chrome.
list end

 

Windows
list of 2 items
• Worked with Microsoft to resolve a reported issue with JAWS double speaking when entering text into a Windows 10 command prompt. This fix will be available
in a Windows update.
• JAWS now announces Microsoft UIA Alert Events. As a result you may now hear more Windows Notifications, and Mouse Echo can now speak more UIA elements,
like minimize, restore and maximize window controls.
list end

Take care.
Mike
Sent from my iBarstool.  Go Dodgers!

 



Re: How to get a character count in a Word document?

Tim Ford
 

Thanks!  That is a terrific trick, and provides a lot of other useful information. 
 
Tim Ford
 
 

Sent: Tuesday, October 04, 2016 4:28 PM
Subject: Re: How to get a character count in a Word document?
 

Hi Tim,

 

Control plus shift plus G.

 

Laura

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tim Ford
Sent: Tuesday, October 04, 2016 6:26 PM
To: main@jfw.groups.io
Subject: How to get a character count in a Word document?

 

Hi All,

 

I need to track the character count, since this project has a 2,500 character limit.  I am running Office 2010.  How do I do that with JAWS? 

 

Tim Ford

 


Re: Latest Jaws 18 Beta Download Links & What's New

 

Hi,

 

If you go to www.FreedomScientific.com and click on the Jaws 18 Public Beta link you can then easily find the form for reporting bugs. To make it easier, here is a direct link for said form:

 

https://www.freedomscientific.com/Forms/JAWSBetaReport

 

Regards,

Sieghard

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of majno
Sent: Tuesday, October 04, 2016 5:42 PM
To: main@jfw.groups.io
Subject: Re: Latest Jaws 18 Beta Download Links & What's New

 

Here some bugs with the new feature to "lower the audio while jaws s speaking"

When the audio is reduced and jaws speaking is turned off the volume never turns up again.

 

i don't know how and where submit bugs so i leave it here in case anybodywnats submit.

 

El 04-Oct-16 a las 5:54 PM, Mike B. escribió:

Hi All,

 

Below are the direct download links for the latest Jaws 18 Beta version, J18.0.1811 (Public Beta 2), & what's new in this update.

 

32 Bit:

 

 

64 Bit:

 

 

Enhancements in JAWS 18.0.1811 (Public Beta 2)

 

The following is a list of improvements made between the first Public Beta and Public Beta 2. Note that while many customer reported enhancements are included
in this release, the following is a list of more notable changes.

 

Lower the Audio from Other Programs While JAWS is Speaking

 

In Windows 8 and later, you can now specify that the volume of audio from other programs be lowered while JAWS is speaking using the Eloquence or Vocalizer
Expressive synthesizers as well as any SAPI5 synthesizer. This is commonly known as audio ducking. For example, if you are listening to music or playing
a video and JAWS begins talking, the volume of the music or video will be slightly lowered so you can comfortably hear JAWS and then raised back to its
current level when JAWS stops talking.

 

For JAWS users with a braille display, you can also choose to mute JAWS speech (INSERT+SPACEBAR, S) while listening to audio from other programs and still
use JAWS with braille output only, without the audio from the other programs being reduced.

 

By default, audio remains at the same volume as JAWS speech. To change this, there are two ways. The easiest way is to open the Startup Wizard from the
JAWS Help menu and select the Lower the volume of other programs while JAWS is speaking checkbox located on the Speech Settings page.

 

Alternatively, you can change this option through Settings Center by doing the following:

 

list of 5 items
1. Press INSERT+F2, and select Settings Center.
2. Press CTRL+SHIFT+D to load the JAWS default settings.
3. In the Search edit box, type "volume" without the quotes.
4. Press DOWN ARROW to move to "Lower the volume of other programs while JAWS is speaking" in the filtered search results in the tree view.
5. Press SPACEBAR to toggle this option.
list end

 

More Dynamic Braille Auto Advance Mode

 

Auto Advance Mode is equivalent to the Say All command for braille readers and has been available in JAWS for many years. After performing the appropriate
command on your braille display (left and right selector buttons on the Focus series displays), the braille display is automatically panned at a specific
speed through an entire document, automatically skipping over blank segments and blank lines. In prior versions, users could configure how long JAWS paused
before automatically panning the display. Once configured, the display would pan at the same speed regardless of how much information was on the display,
so most users would set the timer for optimal reading when the display was full. However, if the display panned to a short line containing only a few words
with the remaining cells being empty, which could occur more frequently with larger displays such as those with 40 or 80 cells, this could be inconvenient
as the user would have to wait for the display to advance which could cause an interruption with reading.

 

To improve the reading experience when using Auto Advance Mode, JAWS now pans faster or slower depending on the length of the current braille line. The
display will pan faster for short lines so you can instantly move to the next segment without having to wait once you have finished reading, but will pan
slower for longer lines up to a maximum length of time which is used when the display is full. This maximum value can be configured through Settings Center
using the new Auto Advance Maximum Interval option. By default, it is set to 5000 milliseconds, or five seconds.

 

For example, if you have an 80 cell display and the current braille line takes up the majority of the display, JAWS will pan the display after five seconds.
If the display pans to a short line containing only a few words and the remaining cells are blank, JAWS will pan the display within a couple seconds.

 

Improved Performance when Using JAWS and ZoomText Together

 

JAWS 18 introduces greatly improved interoperability with the soon to be released ZoomText 11. Users of both these industry leading products will experience
more seemless operation when running JAWS 18 and ZoomText 11 together regardless of the order in which they are installed as well as which product is started
first.

 

When JAWS 18 and ZoomText 11 are running together, users should note the following:

 

list of 4 items
• JAWS handles all speech functions except for ZoomText's App Reader feature and speech directly from ZoomText , such as ZoomText scripts.
• All ZoomText magnification features will continue to work as expected. In addition, ZoomText will now visually highlight and track during a JAWS Say
All, or when navigating using the Virtual Cursor.
• If there is a keystroke conflict, the JAWS keystroke is used instead. Otherwise, JAWS and ZoomText keystrokes will continue to work as expected.
• ZoomText handles all touch related functions.
list end

 

Since JAWS takes over all speech functions when running with ZoomText, this also includes mouse echo. If you want the mouse to echo as it is moved, you
will need to enable mouse echo in JAWS as it is off by default. The easiest way is to press the layered keystroke, INSERT+SPACEBAR, E, O. However, this
is only temporary and will revert back to off if JAWS is restarted. If you intend on using mouse echo all the time, you can permanently enable it by doing
the following:

 

list of 3 items
1. Press INSERT+F2, and select Settings Center.
2. Press CTRL+SHIFT+D to load the JAWS default settings.
3. From the tree view, expand the Mouse Echo group and press SPACEBAR on Enable Mouse Echo.
list end

 

Touch Improvements
list of 9 items
• JAWS touch gestures are now included in the Command Search feature (INSERT+SPACEBAR, J). If you search for a command that can be performed using a keystgroke
or a gesture, both the keystroke and gesture are displayed in the search results. You can also search for gesture-specific commands, such as toggling the
Touch Keyboard, or cycling through Touch Navigation, Text Reading, or Speech Settings gesture modes. The JAWS Command Search only includes gestures if
JAWS detects that it is running on a touch screen enabled device.
• Addressed issues with using gestures to switch to an application in the task switching window that displays when you swipe from the left edge of the
screen. When the task switcher opens, flick left or right through the list of running applications and when you locate the one you want, double tap it
to move focus in to that app.
• Improved the experience when using touch gestures to log into Windows. If the Login screen is active and focus is on the Password edit field, performing
a double tap will immediately open the touch keyboard allowing you to enter your password. Otherwise, flick right or explore until you locate the Password
edit field and then double tap to set focus and open the touch keyboard.
• JAWS no longer repeats the password label field multiple times on the Windows 10 Login screen.
• In response to user feedback, the default typing mode for the touch keyboard is now Touch Typing, which means a key is typed as soon as the finger is
lifted from the keyboard button, or you perform a split tap.
• If the gesture mode is set to Text Reading, you can now perform a four-finger swipe down to begin a Say All in the currently open document, similar to
pressing INSERT+DOWN ARROW on the keyboard. To stop reading, tap anywhere on the screen.
• In response to customer requests, added a new option to the Touch Cursor group in Quick Settings that allows you to choose the element type that is navigated
to when using the flick up and flick down gestures. The available choices are Regions (selected by default), Headings, List Items, Buttons, Links, Groups,
and Form Controls. Note that not all apps support these navigation types, they are typically available in modern apps and web applications.
• If you perform a JAWS touch gesture and then do a five-finger rotate to turn off all JAWS gestures, resolved an issue where Windows-specific gestures
would no longer work until you restarted JAWS.
• Addressed an issue where the Minimize, Maximize, and Close buttons in the title bar of an application were not being announced by JAWS when exploring
the screen.
list end

 

Google Docs
list of 6 items
• You can now type text into a document using Contracted Braille.
• Added speech and braille support for navigating tables inserted into documents.
• Resolved several issues with JAWS not detecting live region updates.
• Addressed issues where JAWS was announcing extraneous information when opening menus.
• Resolved several issues with menus and focus.
• Resolved multiple issues where focus would unexpectedly jump to other places while editing a document.
list end

 

JAWS
list of 7 items
• Addressed an issue where Settings Center changes made after migrating or importing settings were not taking affect unless JAWS was restarted.
• If the mouse echo feature is disabled, addressed an issue where speech was still being interupted when moving the physical mouse.
• In response to customer feedback, updated the Adding Special Symbols help topic with the correct location for the Eloq.sbl file.
• If a Windows 10 alarm goes off, addressed an issue where the volume of JAWS speech would unexpectedly be lowered to an unusable level, making it difficult
for a speech-only user to turn off the alarm.
• Addressed an issue that was observed in multiple applications where JAWS was reading the wrong word when pressing CTRL+BACKSPACE to delete the prior
word.
• Added a new Hebrew Computer Braille table. You can set this as a preferred table or set it as the primary table through the Braille Tables dialog box,
accessed by selecting the Computer Braille Tables option in Settings Center. Braille output must be set to Computer Braille before you can make this change.
• A customer using the Spanish version of JAWS reported several English messages and keystroke conflicts. These have been resolved.
list end

 

Microsoft Outlook
list of 5 items
• Addressed an issue with Outlook 2016 where JAWS was not reading all of the info in the meeting attendees list.
• If a calendar appointment lasts for more than one day, resolved a customer reported issue where JAWS would not indicate the appointment after moving
past the first day.
• If a calendar event is set to all day in Outlook 2013, resolved a reported issue with JAWS not reading the end date.
• Addressed a reported issue with the Outlook 2016 Office Theme combo box, located in the Options dialog box, not being displayed properly in braille.
• Addressed a reported issue with the INSERT+F keystroke to read the font and point size not saying anything when used in the message list in Outlook 2013
and 2016.
list end

 

Microsoft Word
list of 2 items
• Resolved an issue where JAWS would unexpectedly restart and Word 2013 would become unresponsive when attempting to insert a comment.
• When using CTRL+PAGE UP and CTRL+PAGE DOWN to switch pages, addressed a reported issue where JAWS was announcing the line from the prior page.
list end

 

Web Browsers
list of 7 items
• Added support for several ARIA 1.1 features including the aria-modal, aria-current, and aria-placeholder attributes, as well as support for partially
visible tables.
• When navigating to links in Firefox with the mouse and the new mouse echo feature is enabled, resolved an issue where JAWS was not  announcing the text
of the link as it appears on the web page.
• Addressed an issue in Firefox where pressing INSERT+R was not toggling Virtual Cursor restriction as expected in web-based dialog boxes.
• If END is pressed in an edit field in Google Chrome, addressed an issue where text in an edit field was no longer indicated in speech or braille.
• Resolved an issue with certain edit combos not being identified correctly in the virtual buffer in both Firefox and Chrome.
• Resolved an issue where tab controls would appear twice in the virtual buffer in Chrome.
• Addressed an issue with heading level indication in Chrome.
list end

 

Windows
list of 2 items
• Worked with Microsoft to resolve a reported issue with JAWS double speaking when entering text into a Windows 10 command prompt. This fix will be available
in a Windows update.
• JAWS now announces Microsoft UIA Alert Events. As a result you may now hear more Windows Notifications, and Mouse Echo can now speak more UIA elements,
like minimize, restore and maximize window controls.
list end

Take care.
Mike
Sent from my iBarstool.  Go Dodgers!