Date   

Re: fixing sert error

Mario
 

ok then, I'll try the site in about a week to two weeks. hope it gets fixed soon.

On 1/18/2016 8:39 PM, Brian Vogel wrote:
Mario,

Chaos did not ensue when I proceeded to the coolblindtech website.
A scan with Malwarebytes after having gone there turns up nothing and
there's nothing in the Windows Defender log after forcing a scan as well.

Depending on the web browser you're using there will be either a
button or link toward the bottom of those warning screens that allow you
to continue through to your original destination. It didn't strike me
that a website named coolblindtech was likely to be malicious, as it
certainly doesn't have the "ooooh, shiny" name factor that would
encourage members of the unsuspecting public to click on it.

They still need to fix that certificate, though.

Brian


Re: IE 11 Successfully Installed Here, Well, Sort Of

Melissa Stott <mstott69@...>
 

I forgot to mention that I am also using IE11.
 

Sent: Monday, January 18, 2016 8:41 PM
Subject: Re: IE 11 Successfully Installed Here, Well, Sort Of
 
Interesting!  I am using Windows7, Jaws17, and a home computer.  I am not having this issue at all.  So, I guess this is definitely a mistery.
 
From: Tom Behler
Sent: Monday, January 18, 2016 8:25 PM
Subject: Re: IE 11 Successfully Installed Here, Well, Sort Of
 

Londa and all:

 

Regarding my problem with entering text into edit boxes using IE 11, I made a very interesting discovery today that I’d like to share.

 

At work, my University windows 7 laptop had Internet Explorer 9 on it, so I upgraded to IE 11 on that computer.  I’m using the same version of Jaws there (Jaws 16.0.4350, and I have no problem entering text into form edit boxes on that computer once IE 11 was installed.

 

So, obviously, the problem I am experiencing is unique to my main home Windows 7 PC.

 

I don’t have a clue as to what might be causing this issue on the home PC, but I at least have this new piece of information to work with.

 

To recap, last summer, I worked extensively with FS Tech support to address this issue.  We conducted  various Jaws repairs and re-configurations.  We also totally uninstalled and then re-installed Jaws.  But nothing worked.

 

The Microsoft Accessibility Hotline folks were also at a loss.

 

In answer to Londa’s question, the problem does not occur when Jaws is closed, and when the computer is used normally as a sighted person would.  In other words, when a sighted person uses the computer without Jaws, the PC cursor behaves as it should with no problem in terms of entering text into edit fields.  I have not tried NVDA, Window Eyes, or another screen reader to see if the problem occurs with alternate screen readers.

 

I’m not quite sure what to do or where to go from here, but at least I have narrowed the problem down somewhat.

 

Dr.  Tom Behler from Michigan

 

 

From: Londa Peterson [mailto:lpeterson@...]
Sent: Monday, January 18, 2016 1:18 PM
To: jfw@groups.io
Subject: Re: IE 11 Successfully Installed Here, Well, Sort Of

 

I'm curious whether or not this is really a JAWS problem. Have you tried this with sighted assistance and no screen reader? Also, have you tried it with NVDA or some other similar product? Just curious and trying to help get to the bottom of this.

 


Re: IE 11 Successfully Installed Here, Well, Sort Of

Melissa Stott <mstott69@...>
 

Interesting!  I am using Windows7, Jaws17, and a home computer.  I am not having this issue at all.  So, I guess this is definitely a mistery.
 

From: Tom Behler
Sent: Monday, January 18, 2016 8:25 PM
Subject: Re: IE 11 Successfully Installed Here, Well, Sort Of
 

Londa and all:

 

Regarding my problem with entering text into edit boxes using IE 11, I made a very interesting discovery today that I’d like to share.

 

At work, my University windows 7 laptop had Internet Explorer 9 on it, so I upgraded to IE 11 on that computer.  I’m using the same version of Jaws there (Jaws 16.0.4350, and I have no problem entering text into form edit boxes on that computer once IE 11 was installed.

 

So, obviously, the problem I am experiencing is unique to my main home Windows 7 PC.

 

I don’t have a clue as to what might be causing this issue on the home PC, but I at least have this new piece of information to work with.

 

To recap, last summer, I worked extensively with FS Tech support to address this issue.  We conducted  various Jaws repairs and re-configurations.  We also totally uninstalled and then re-installed Jaws.  But nothing worked.

 

The Microsoft Accessibility Hotline folks were also at a loss.

 

In answer to Londa’s question, the problem does not occur when Jaws is closed, and when the computer is used normally as a sighted person would.  In other words, when a sighted person uses the computer without Jaws, the PC cursor behaves as it should with no problem in terms of entering text into edit fields.  I have not tried NVDA, Window Eyes, or another screen reader to see if the problem occurs with alternate screen readers.

 

I’m not quite sure what to do or where to go from here, but at least I have narrowed the problem down somewhat.

 

Dr.  Tom Behler from Michigan

 

 

From: Londa Peterson [mailto:lpeterson@...]
Sent: Monday, January 18, 2016 1:18 PM
To: jfw@groups.io
Subject: Re: IE 11 Successfully Installed Here, Well, Sort Of

 

I'm curious whether or not this is really a JAWS problem. Have you tried this with sighted assistance and no screen reader? Also, have you tried it with NVDA or some other similar product? Just curious and trying to help get to the bottom of this.

 


Re: fixing sert error

 

Mario,

     Chaos did not ensue when I proceeded to the coolblindtech website.  A scan with Malwarebytes after having gone there turns up nothing and there's nothing in the Windows Defender log after forcing a scan as well.

      Depending on the web browser you're using there will be either a button or link toward the bottom of those warning screens that allow you to continue through to your original destination.  It didn't strike me that a website named coolblindtech was likely to be malicious, as it certainly doesn't have the "ooooh, shiny" name factor that would encourage members of the unsuspecting public to click on it.

      They still need to fix that certificate, though.

Brian


Re: IE 11 Successfully Installed Here, Well, Sort Of

Tom Behler
 

Londa and all:

 

Regarding my problem with entering text into edit boxes using IE 11, I made a very interesting discovery today that I’d like to share.

 

At work, my University windows 7 laptop had Internet Explorer 9 on it, so I upgraded to IE 11 on that computer.  I’m using the same version of Jaws there (Jaws 16.0.4350, and I have no problem entering text into form edit boxes on that computer once IE 11 was installed.

 

So, obviously, the problem I am experiencing is unique to my main home Windows 7 PC.

 

I don’t have a clue as to what might be causing this issue on the home PC, but I at least have this new piece of information to work with.

 

To recap, last summer, I worked extensively with FS Tech support to address this issue.  We conducted  various Jaws repairs and re-configurations.  We also totally uninstalled and then re-installed Jaws.  But nothing worked.

 

The Microsoft Accessibility Hotline folks were also at a loss.

 

In answer to Londa’s question, the problem does not occur when Jaws is closed, and when the computer is used normally as a sighted person would.  In other words, when a sighted person uses the computer without Jaws, the PC cursor behaves as it should with no problem in terms of entering text into edit fields.  I have not tried NVDA, Window Eyes, or another screen reader to see if the problem occurs with alternate screen readers.

 

I’m not quite sure what to do or where to go from here, but at least I have narrowed the problem down somewhat.

 

Dr.  Tom Behler from Michigan

 

 

From: Londa Peterson [mailto:lpeterson@...]
Sent: Monday, January 18, 2016 1:18 PM
To: jfw@groups.io
Subject: Re: IE 11 Successfully Installed Here, Well, Sort Of

 

I'm curious whether or not this is really a JAWS problem. Have you tried this with sighted assistance and no screen reader? Also, have you tried it with NVDA or some other similar product? Just curious and trying to help get to the bottom of this.

 


Re: Word 2013 Blank Page

 

There is a distinct difference between a page break, inserted with either Ctrl+Enter or ALT+N,B, and a blank page, which is inserted using ALT+N,NP.

The page break is just that, a single page break which splits the current page such that the line directly below the insert point is forced to the top of the next page.  You end up with a partial blank page just below the insert point.

The blank page command actually inserts 2 page breaks.  The first does what a conventional page break does.  The second page break forces the line that had been just below the original insert point down one page further, thus it guarantees that you will actually have a full blank page between the line above and the line below the insert point.

Brian


Re: fixing sert error

Mario
 

so Brian, do you think it would be ok to continue to the site? there is a button towards the bottom that I didn't see.

On 1/18/2016 7:51 PM, Brian Vogel wrote:
Mario,

There is actually a problem with the site's security
certificate and it is expired. The details from Firefox are as follows:

----------------------------------------------

www.coolblindtech.com uses an invalid security certificate. The
certificate expired on Monday, January 18, 2016 6:59 PM. The current
time is Monday, January 18, 2016 7:45 PM. (Error code:
sec_error_expired_certificate)

----------------------------------------------

I dropped them a message via their contact us form after proceeding to
the site. It looks to be legitimate, but they should fix this problem
if they care about getting web traffic.

Brian


Re: fixing sert error

 

Mario,

         There is actually a problem with the site's security certificate and it is expired.  The details from Firefox are as follows:

----------------------------------------------

www.coolblindtech.com uses an invalid security certificate. The certificate expired on Monday, January 18, 2016 6:59 PM. The current time is Monday, January 18, 2016 7:45 PM. (Error code: sec_error_expired_certificate)

----------------------------------------------

I dropped them a message via their contact us form after proceeding to the site.  It looks to be legitimate, but they should fix this problem if they care about getting web traffic.

Brian


fixing sert error

Mario
 

I forgot if this had been discussed on this list or another one I'm subscribed to, and don't recall if a solution was given, but I'm getting the error when I browse to:
http://www.coolblindtech.com/

Shield icon
There is a problem with this website’s security certificate.

The security certificate presented by this website has expired or is not yet valid.

Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server.

We recommend that you close this webpage and do not continue to this website.


Re: Word 2013 Blank Page

Mike B <mb69mach1@...>
 

Adrian,
 
I forgot to add to my previous post that the, ^, symbol is supposed to be added in front of the designated letters.  I was told awhile back this by someone that teaches Word, but this could very well be wrong.
Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----
From: Mike B.
Sent: Monday, January 18, 2016 4:04 PM
Subject: Re: Word 2013 Blank Page

Adrian,
 
According to the Special option in Find & Replace, ^k, is for manual page breaks.  I copied all the commands listed in the Special option, they're below:
 
Paragraph Mark, p
Tab Character, t
Any Character, c
Any Digit, g
Any Letter, y
Caret Character, r
§ Section Character, a
¶ Paragraph Character, a
Column Break, u
Em Dash, m
En Dash, n
Endnote Mark, e
Field, d
Footnote Mark, f
Graphic, i
Manual Line Break, l
Manual Page Break, k
Nonbreaking Hyphen, h
Nonbreaking Space, s
Optional Hyphen, o
Section Break, b
White Space , w 
 
I know there are more shortcut keys, for lack of a better term, to be used in Find & Replace & it would be nice to have the whole list.  Well I guess a search is in short order.
Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!
----- Original Message -----
Sent: Monday, January 18, 2016 3:29 PM
Subject: Re: Word 2013 Blank Page

Thanks, Mike. I think you’re on to something here with formatting, though I haven’t quite figured it out yet. For the record, caret-m searches for page breaks, however created. Caret-k appears to search for section breaks, at least in Word 2010.

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Monday, January 18, 2016 6:02 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Hi Adrian,

 

If you create a page break with the Control + enter keystroke to go to a new page, formatting, I only use the term formatting for lack of a better term, of some nature is left on the page you created the page break on.  I don't know if this "formatting" is visible to a sighted person or not but, when using the find & replace dialog page breaks can be found using,^k.  If you started a new page halfway down a page, I don't think any formatting is left on the prior page, only blank lines.

 

 

Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----

Sent: Monday, January 18, 2016 12:45 PM

Subject: Re: Word 2013 Blank Page

 

Kimsan and Mike, the only problem with your posts, which I say with affection, is that they have nothing to do with my query. I didn’t write “control-n,” but alt-n, followed by n, followed by p.

 

I remain curious whether there’s a practical difference between the page break and new page commands.

 

From: Kimsan [mailto:kimsansong@...]
Sent: Monday, January 18, 2016 3:32 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

You’re on point bro. Those do exactly as advertised, even in 2013.

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Monday, January 18, 2016 12:00 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Hi Adrian,

 

I believe, Control + Enter, creates a page break.  Control + N, opens a new document, at least that's the way it works in Word 2010.

Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----

Sent: Monday, January 18, 2016 3:03 AM

Subject: Re: Word 2013 Blank Page

 

Hi, Rayette. Can you or anyone else explain when "alt-n, n, p" would be needed in lieu of control-enter to create a new page. I can't think of a situation. Thanks.

-----Original Message-----
From: Rayette Rucker [mailto:ruckerr9@...]
Sent: Sunday, January 10, 2016 8:18 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Alt n, n, p


-----Original Message-----
From: Brian Smith [mailto:briansmith372@...]
Sent: Sunday, January 10, 2016 7:11 PM
To: jfw@groups.io
Subject: Word 2013 Blank Page

Hello:

How can I insert a blank page into a Word 2013 document?  Is there a
keyboard command that I can use to insert a blank page into a Word 2013
document?  Thanks for any help.

Brian Smith









Re: Word 2013 Blank Page

Mike B <mb69mach1@...>
 

Adrian,
 
According to the Special option in Find & Replace, ^k, is for manual page breaks.  I copied all the commands listed in the Special option, they're below:
 
Paragraph Mark, p
Tab Character, t
Any Character, c
Any Digit, g
Any Letter, y
Caret Character, r
§ Section Character, a
¶ Paragraph Character, a
Column Break, u
Em Dash, m
En Dash, n
Endnote Mark, e
Field, d
Footnote Mark, f
Graphic, i
Manual Line Break, l
Manual Page Break, k
Nonbreaking Hyphen, h
Nonbreaking Space, s
Optional Hyphen, o
Section Break, b
White Space , w 
 
I know there are more shortcut keys, for lack of a better term, to be used in Find & Replace & it would be nice to have the whole list.  Well I guess a search is in short order.
Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----
Sent: Monday, January 18, 2016 3:29 PM
Subject: Re: Word 2013 Blank Page

Thanks, Mike. I think you’re on to something here with formatting, though I haven’t quite figured it out yet. For the record, caret-m searches for page breaks, however created. Caret-k appears to search for section breaks, at least in Word 2010.

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Monday, January 18, 2016 6:02 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Hi Adrian,

 

If you create a page break with the Control + enter keystroke to go to a new page, formatting, I only use the term formatting for lack of a better term, of some nature is left on the page you created the page break on.  I don't know if this "formatting" is visible to a sighted person or not but, when using the find & replace dialog page breaks can be found using,^k.  If you started a new page halfway down a page, I don't think any formatting is left on the prior page, only blank lines.

 

 

Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----

Sent: Monday, January 18, 2016 12:45 PM

Subject: Re: Word 2013 Blank Page

 

Kimsan and Mike, the only problem with your posts, which I say with affection, is that they have nothing to do with my query. I didn’t write “control-n,” but alt-n, followed by n, followed by p.

 

I remain curious whether there’s a practical difference between the page break and new page commands.

 

From: Kimsan [mailto:kimsansong@...]
Sent: Monday, January 18, 2016 3:32 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

You’re on point bro. Those do exactly as advertised, even in 2013.

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Monday, January 18, 2016 12:00 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Hi Adrian,

 

I believe, Control + Enter, creates a page break.  Control + N, opens a new document, at least that's the way it works in Word 2010.

Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----

Sent: Monday, January 18, 2016 3:03 AM

Subject: Re: Word 2013 Blank Page

 

Hi, Rayette. Can you or anyone else explain when "alt-n, n, p" would be needed in lieu of control-enter to create a new page. I can't think of a situation. Thanks.

-----Original Message-----
From: Rayette Rucker [mailto:ruckerr9@...]
Sent: Sunday, January 10, 2016 8:18 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Alt n, n, p


-----Original Message-----
From: Brian Smith [mailto:briansmith372@...]
Sent: Sunday, January 10, 2016 7:11 PM
To: jfw@groups.io
Subject: Word 2013 Blank Page

Hello:

How can I insert a blank page into a Word 2013 document?  Is there a
keyboard command that I can use to insert a blank page into a Word 2013
document?  Thanks for any help.

Brian Smith









Re: Word 2013 Blank Page

Adrian Spratt
 

Thanks, Mike. I think you’re on to something here with formatting, though I haven’t quite figured it out yet. For the record, caret-m searches for page breaks, however created. Caret-k appears to search for section breaks, at least in Word 2010.

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Monday, January 18, 2016 6:02 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Hi Adrian,

 

If you create a page break with the Control + enter keystroke to go to a new page, formatting, I only use the term formatting for lack of a better term, of some nature is left on the page you created the page break on.  I don't know if this "formatting" is visible to a sighted person or not but, when using the find & replace dialog page breaks can be found using,^k.  If you started a new page halfway down a page, I don't think any formatting is left on the prior page, only blank lines.

 

 

Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----

Sent: Monday, January 18, 2016 12:45 PM

Subject: Re: Word 2013 Blank Page

 

Kimsan and Mike, the only problem with your posts, which I say with affection, is that they have nothing to do with my query. I didn’t write “control-n,” but alt-n, followed by n, followed by p.

 

I remain curious whether there’s a practical difference between the page break and new page commands.

 

From: Kimsan [mailto:kimsansong@...]
Sent: Monday, January 18, 2016 3:32 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

You’re on point bro. Those do exactly as advertised, even in 2013.

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Monday, January 18, 2016 12:00 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Hi Adrian,

 

I believe, Control + Enter, creates a page break.  Control + N, opens a new document, at least that's the way it works in Word 2010.

Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----

Sent: Monday, January 18, 2016 3:03 AM

Subject: Re: Word 2013 Blank Page

 

Hi, Rayette. Can you or anyone else explain when "alt-n, n, p" would be needed in lieu of control-enter to create a new page. I can't think of a situation. Thanks.

-----Original Message-----
From: Rayette Rucker [mailto:ruckerr9@...]
Sent: Sunday, January 10, 2016 8:18 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Alt n, n, p


-----Original Message-----
From: Brian Smith [mailto:briansmith372@...]
Sent: Sunday, January 10, 2016 7:11 PM
To: jfw@groups.io
Subject: Word 2013 Blank Page

Hello:

How can I insert a blank page into a Word 2013 document?  Is there a
keyboard command that I can use to insert a blank page into a Word 2013
document?  Thanks for any help.

Brian Smith









Re: google drive help

Kimsan <kimsansong@...>
 

I meant to say invest time lol.
It's on my to do list.

-----Original Message-----
From: Marianne Denning [mailto:marianne@denningweb.com]
Sent: Monday, January 18, 2016 6:14 AM
To: jfw@groups.io
Subject: Re: google drive help

The webinar is free so don't worry about the cost. I have exchange students and I help them with homework. If we both have the document open at the same time I can see as they edit and they can see as I edit. If you are working in a group and someone is making changes to the document you can see the changes as they take place so that might spark other thoughts for changes.

On 1/18/16, Kimsan <kimsansong@outlook.com> wrote:
Marryanne:

Maybe I'm naïve when it comes to google drive, and I should invest in
the Web&R which I will; however, I assumed google drive and sharing
was simply similar to dropbox and sharing.


Based on my limited knowledge of google drive, the only time to visit
the web in relation to sharing is when you actually share the folder,
but after that it was a simple copy and paste after the folders were
created and shared between all parties...

Like the old saying goes, you learn something everyday.
-----Original Message-----
From: Marianne Denning [mailto:marianne@denningweb.com]
Sent: Sunday, January 17, 2016 12:07 PM
To: jfw@groups.io
Subject: Re: google drive help

Why do you want to avoid the web based Google? That is how people
working on the same document can collaborate together.

On 1/15/16, Kimsan <kimsansong@outlook.com> wrote:
Hi,

My college just created a google drive folder. I have my own google
drive folder, and I have the google drive folder on my desktop.

How can I put that shared folder into my folder that I have on my
desktop, so I can avoid the web based route.

Thanks.


--
Marianne Denning, TVI, MA
Teacher of students who are blind or visually impaired
(513) 607-6053







--
Marianne Denning, TVI, MA
Teacher of students who are blind or visually impaired
(513) 607-6053

I have attached a list of common commands and I hope it is helpful.


Re: Word 2013 Blank Page

Kimsan <kimsansong@...>
 

My fault.

I thought you were asking for a page break command.

 

From: Adrian Spratt [mailto:Adrian@...]
Sent: Monday, January 18, 2016 12:46 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Kimsan and Mike, the only problem with your posts, which I say with affection, is that they have nothing to do with my query. I didn’t write “control-n,” but alt-n, followed by n, followed by p.

 

I remain curious whether there’s a practical difference between the page break and new page commands.

 

From: Kimsan [mailto:kimsansong@...]
Sent: Monday, January 18, 2016 3:32 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

You’re on point bro. Those do exactly as advertised, even in 2013.

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Monday, January 18, 2016 12:00 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Hi Adrian,

 

I believe, Control + Enter, creates a page break.  Control + N, opens a new document, at least that's the way it works in Word 2010.

Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----

Sent: Monday, January 18, 2016 3:03 AM

Subject: Re: Word 2013 Blank Page

 

Hi, Rayette. Can you or anyone else explain when "alt-n, n, p" would be needed in lieu of control-enter to create a new page. I can't think of a situation. Thanks.

-----Original Message-----
From: Rayette Rucker [mailto:ruckerr9@...]
Sent: Sunday, January 10, 2016 8:18 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Alt n, n, p


-----Original Message-----
From: Brian Smith [mailto:briansmith372@...]
Sent: Sunday, January 10, 2016 7:11 PM
To: jfw@groups.io
Subject: Word 2013 Blank Page

Hello:

How can I insert a blank page into a Word 2013 document?  Is there a
keyboard command that I can use to insert a blank page into a Word 2013
document?  Thanks for any help.

Brian Smith









Re: Word 2013 Blank Page

Mike B <mb69mach1@...>
 

Hi Adrian,
 
If you create a page break with the Control + enter keystroke to go to a new page, formatting, I only use the term formatting for lack of a better term, of some nature is left on the page you created the page break on.  I don't know if this "formatting" is visible to a sighted person or not but, when using the find & replace dialog page breaks can be found using,^k.  If you started a new page halfway down a page, I don't think any formatting is left on the prior page, only blank lines.
 
 
Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----
Sent: Monday, January 18, 2016 12:45 PM
Subject: Re: Word 2013 Blank Page

Kimsan and Mike, the only problem with your posts, which I say with affection, is that they have nothing to do with my query. I didn’t write “control-n,” but alt-n, followed by n, followed by p.

 

I remain curious whether there’s a practical difference between the page break and new page commands.

 

From: Kimsan [mailto:kimsansong@...]
Sent: Monday, January 18, 2016 3:32 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

You’re on point bro. Those do exactly as advertised, even in 2013.

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Monday, January 18, 2016 12:00 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Hi Adrian,

 

I believe, Control + Enter, creates a page break.  Control + N, opens a new document, at least that's the way it works in Word 2010.

Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----

Sent: Monday, January 18, 2016 3:03 AM

Subject: Re: Word 2013 Blank Page

 

Hi, Rayette. Can you or anyone else explain when "alt-n, n, p" would be needed in lieu of control-enter to create a new page. I can't think of a situation. Thanks.

-----Original Message-----
From: Rayette Rucker [mailto:ruckerr9@...]
Sent: Sunday, January 10, 2016 8:18 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Alt n, n, p


-----Original Message-----
From: Brian Smith [mailto:briansmith372@...]
Sent: Sunday, January 10, 2016 7:11 PM
To: jfw@groups.io
Subject: Word 2013 Blank Page

Hello:

How can I insert a blank page into a Word 2013 document?  Is there a
keyboard command that I can use to insert a blank page into a Word 2013
document?  Thanks for any help.

Brian Smith










Re: Filling In the EDIT field on Facebook

David Moore
 

Hi,
I use the Facebook mobile site, but Firefox does not work for me at all with it. I have to use IE11 or Google Chrome on the mobile site. I don’t know what happens with Firefox on Facebook, but I can’t comment and like either. IE 11 is still the best for working with the mobile site by far. This is why you need two or even three browsers, because one browser works better on one site, and another browser works better on the second site and so on. I use all three browsers for different web sites. Have a great one. IE 11 is the best browser for FB by far.
 
 

Sent: Monday, January 18, 2016 1:09 PM
Subject: Re: Filling In the EDIT field on Facebook
 

There is no link to delete it.  I also haven’t been able to respond to face book posts since changing to Firefox.  Judith

 

From: Kevin Wollenweber [mailto:dancingweed@...]
Sent: Monday, January 18, 2016 12:39 PM
To: jfw@groups.io
Subject: Filling In the EDIT field on Facebook

 

Has anyone had problems with Facebook., lately?  I’ve tried posting comments, but only the first letter comes out!!  Then, I don’t know how to take the post down and try again, because there doesn’t seem to be any link to delete it.

 

Any help would be appreciated.

 

Kevin

This email has been sent from a virus-free computer protected by Avast.
www.avast.com


Re: Word 2013 Blank Page

Mike B <mb69mach1@...>
 

Hi Adrian,
 
I'm totally sorry!  I mistook new page for new document!
Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----
Sent: Monday, January 18, 2016 12:45 PM
Subject: Re: Word 2013 Blank Page

Kimsan and Mike, the only problem with your posts, which I say with affection, is that they have nothing to do with my query. I didn’t write “control-n,” but alt-n, followed by n, followed by p.

 

I remain curious whether there’s a practical difference between the page break and new page commands.

 

From: Kimsan [mailto:kimsansong@...]
Sent: Monday, January 18, 2016 3:32 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

You’re on point bro. Those do exactly as advertised, even in 2013.

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Monday, January 18, 2016 12:00 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Hi Adrian,

 

I believe, Control + Enter, creates a page break.  Control + N, opens a new document, at least that's the way it works in Word 2010.

Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----

Sent: Monday, January 18, 2016 3:03 AM

Subject: Re: Word 2013 Blank Page

 

Hi, Rayette. Can you or anyone else explain when "alt-n, n, p" would be needed in lieu of control-enter to create a new page. I can't think of a situation. Thanks.

-----Original Message-----
From: Rayette Rucker [mailto:ruckerr9@...]
Sent: Sunday, January 10, 2016 8:18 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Alt n, n, p


-----Original Message-----
From: Brian Smith [mailto:briansmith372@...]
Sent: Sunday, January 10, 2016 7:11 PM
To: jfw@groups.io
Subject: Word 2013 Blank Page

Hello:

How can I insert a blank page into a Word 2013 document?  Is there a
keyboard command that I can use to insert a blank page into a Word 2013
document?  Thanks for any help.

Brian Smith










FaceBook again. Paid support.

Tusing <ptusing@...>
 

Hi,

I  did not wish to  interrupt the good discussion of I E 11

But I am asking if some one wishes to earn a little cash

Helping me with

The

History Channel FaceBook page.

 

I have  been reading messages on the

FaceBook listand am  asking people who normally do techsupport.

But they don’t support

FaceBook.

 

If you really know FaceBook and JAWS well, please contact me off  list and we can agree and get started.

 

Yes, I am well aware of the webinars on FaceBook.

Thank you.


Re: Word 2013 Blank Page

Adrian Spratt
 

Kimsan and Mike, the only problem with your posts, which I say with affection, is that they have nothing to do with my query. I didn’t write “control-n,” but alt-n, followed by n, followed by p.

 

I remain curious whether there’s a practical difference between the page break and new page commands.

 

From: Kimsan [mailto:kimsansong@...]
Sent: Monday, January 18, 2016 3:32 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

You’re on point bro. Those do exactly as advertised, even in 2013.

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Monday, January 18, 2016 12:00 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Hi Adrian,

 

I believe, Control + Enter, creates a page break.  Control + N, opens a new document, at least that's the way it works in Word 2010.

Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----

Sent: Monday, January 18, 2016 3:03 AM

Subject: Re: Word 2013 Blank Page

 

Hi, Rayette. Can you or anyone else explain when "alt-n, n, p" would be needed in lieu of control-enter to create a new page. I can't think of a situation. Thanks.

-----Original Message-----
From: Rayette Rucker [mailto:ruckerr9@...]
Sent: Sunday, January 10, 2016 8:18 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Alt n, n, p


-----Original Message-----
From: Brian Smith [mailto:briansmith372@...]
Sent: Sunday, January 10, 2016 7:11 PM
To: jfw@groups.io
Subject: Word 2013 Blank Page

Hello:

How can I insert a blank page into a Word 2013 document?  Is there a
keyboard command that I can use to insert a blank page into a Word 2013
document?  Thanks for any help.

Brian Smith










Re: Word 2013 Blank Page

Kimsan <kimsansong@...>
 

The only thing I can think of is CTRL enter was never heard of to have them
use the keytip listed below.

I use CTRL enter as the keytip is just to many letters to remember, lol.

-----Original Message-----
From: Adrian Spratt [mailto:Adrian@AdrianSpratt.com]
Sent: Monday, January 18, 2016 3:03 AM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Hi, Rayette. Can you or anyone else explain when "alt-n, n, p" would be
needed in lieu of control-enter to create a new page. I can't think of a
situation. Thanks.

-----Original Message-----
From: Rayette Rucker [mailto:ruckerr9@gmail.com]
Sent: Sunday, January 10, 2016 8:18 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Alt n, n, p


-----Original Message-----
From: Brian Smith [mailto:briansmith372@verizon.net]
Sent: Sunday, January 10, 2016 7:11 PM
To: jfw@groups.io
Subject: Word 2013 Blank Page

Hello:

How can I insert a blank page into a Word 2013 document? Is there a
keyboard command that I can use to insert a blank page into a Word 2013
document? Thanks for any help.

Brian Smith