Date   

Re: Word 2013 Blank Page

Adrian Spratt
 

Thanks, Mike. I think you’re on to something here with formatting, though I haven’t quite figured it out yet. For the record, caret-m searches for page breaks, however created. Caret-k appears to search for section breaks, at least in Word 2010.

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Monday, January 18, 2016 6:02 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Hi Adrian,

 

If you create a page break with the Control + enter keystroke to go to a new page, formatting, I only use the term formatting for lack of a better term, of some nature is left on the page you created the page break on.  I don't know if this "formatting" is visible to a sighted person or not but, when using the find & replace dialog page breaks can be found using,^k.  If you started a new page halfway down a page, I don't think any formatting is left on the prior page, only blank lines.

 

 

Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----

Sent: Monday, January 18, 2016 12:45 PM

Subject: Re: Word 2013 Blank Page

 

Kimsan and Mike, the only problem with your posts, which I say with affection, is that they have nothing to do with my query. I didn’t write “control-n,” but alt-n, followed by n, followed by p.

 

I remain curious whether there’s a practical difference between the page break and new page commands.

 

From: Kimsan [mailto:kimsansong@...]
Sent: Monday, January 18, 2016 3:32 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

You’re on point bro. Those do exactly as advertised, even in 2013.

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Monday, January 18, 2016 12:00 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Hi Adrian,

 

I believe, Control + Enter, creates a page break.  Control + N, opens a new document, at least that's the way it works in Word 2010.

Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----

Sent: Monday, January 18, 2016 3:03 AM

Subject: Re: Word 2013 Blank Page

 

Hi, Rayette. Can you or anyone else explain when "alt-n, n, p" would be needed in lieu of control-enter to create a new page. I can't think of a situation. Thanks.

-----Original Message-----
From: Rayette Rucker [mailto:ruckerr9@...]
Sent: Sunday, January 10, 2016 8:18 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Alt n, n, p


-----Original Message-----
From: Brian Smith [mailto:briansmith372@...]
Sent: Sunday, January 10, 2016 7:11 PM
To: jfw@groups.io
Subject: Word 2013 Blank Page

Hello:

How can I insert a blank page into a Word 2013 document?  Is there a
keyboard command that I can use to insert a blank page into a Word 2013
document?  Thanks for any help.

Brian Smith









Re: google drive help

Kimsan <kimsansong@...>
 

I meant to say invest time lol.
It's on my to do list.

-----Original Message-----
From: Marianne Denning [mailto:marianne@denningweb.com]
Sent: Monday, January 18, 2016 6:14 AM
To: jfw@groups.io
Subject: Re: google drive help

The webinar is free so don't worry about the cost. I have exchange students and I help them with homework. If we both have the document open at the same time I can see as they edit and they can see as I edit. If you are working in a group and someone is making changes to the document you can see the changes as they take place so that might spark other thoughts for changes.

On 1/18/16, Kimsan <kimsansong@outlook.com> wrote:
Marryanne:

Maybe I'm naïve when it comes to google drive, and I should invest in
the Web&R which I will; however, I assumed google drive and sharing
was simply similar to dropbox and sharing.


Based on my limited knowledge of google drive, the only time to visit
the web in relation to sharing is when you actually share the folder,
but after that it was a simple copy and paste after the folders were
created and shared between all parties...

Like the old saying goes, you learn something everyday.
-----Original Message-----
From: Marianne Denning [mailto:marianne@denningweb.com]
Sent: Sunday, January 17, 2016 12:07 PM
To: jfw@groups.io
Subject: Re: google drive help

Why do you want to avoid the web based Google? That is how people
working on the same document can collaborate together.

On 1/15/16, Kimsan <kimsansong@outlook.com> wrote:
Hi,

My college just created a google drive folder. I have my own google
drive folder, and I have the google drive folder on my desktop.

How can I put that shared folder into my folder that I have on my
desktop, so I can avoid the web based route.

Thanks.


--
Marianne Denning, TVI, MA
Teacher of students who are blind or visually impaired
(513) 607-6053







--
Marianne Denning, TVI, MA
Teacher of students who are blind or visually impaired
(513) 607-6053

I have attached a list of common commands and I hope it is helpful.


Re: Word 2013 Blank Page

Kimsan <kimsansong@...>
 

My fault.

I thought you were asking for a page break command.

 

From: Adrian Spratt [mailto:Adrian@...]
Sent: Monday, January 18, 2016 12:46 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Kimsan and Mike, the only problem with your posts, which I say with affection, is that they have nothing to do with my query. I didn’t write “control-n,” but alt-n, followed by n, followed by p.

 

I remain curious whether there’s a practical difference between the page break and new page commands.

 

From: Kimsan [mailto:kimsansong@...]
Sent: Monday, January 18, 2016 3:32 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

You’re on point bro. Those do exactly as advertised, even in 2013.

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Monday, January 18, 2016 12:00 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Hi Adrian,

 

I believe, Control + Enter, creates a page break.  Control + N, opens a new document, at least that's the way it works in Word 2010.

Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----

Sent: Monday, January 18, 2016 3:03 AM

Subject: Re: Word 2013 Blank Page

 

Hi, Rayette. Can you or anyone else explain when "alt-n, n, p" would be needed in lieu of control-enter to create a new page. I can't think of a situation. Thanks.

-----Original Message-----
From: Rayette Rucker [mailto:ruckerr9@...]
Sent: Sunday, January 10, 2016 8:18 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Alt n, n, p


-----Original Message-----
From: Brian Smith [mailto:briansmith372@...]
Sent: Sunday, January 10, 2016 7:11 PM
To: jfw@groups.io
Subject: Word 2013 Blank Page

Hello:

How can I insert a blank page into a Word 2013 document?  Is there a
keyboard command that I can use to insert a blank page into a Word 2013
document?  Thanks for any help.

Brian Smith









Re: Word 2013 Blank Page

Mike B <mb69mach1@...>
 

Hi Adrian,
 
If you create a page break with the Control + enter keystroke to go to a new page, formatting, I only use the term formatting for lack of a better term, of some nature is left on the page you created the page break on.  I don't know if this "formatting" is visible to a sighted person or not but, when using the find & replace dialog page breaks can be found using,^k.  If you started a new page halfway down a page, I don't think any formatting is left on the prior page, only blank lines.
 
 
Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----
Sent: Monday, January 18, 2016 12:45 PM
Subject: Re: Word 2013 Blank Page

Kimsan and Mike, the only problem with your posts, which I say with affection, is that they have nothing to do with my query. I didn’t write “control-n,” but alt-n, followed by n, followed by p.

 

I remain curious whether there’s a practical difference between the page break and new page commands.

 

From: Kimsan [mailto:kimsansong@...]
Sent: Monday, January 18, 2016 3:32 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

You’re on point bro. Those do exactly as advertised, even in 2013.

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Monday, January 18, 2016 12:00 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Hi Adrian,

 

I believe, Control + Enter, creates a page break.  Control + N, opens a new document, at least that's the way it works in Word 2010.

Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----

Sent: Monday, January 18, 2016 3:03 AM

Subject: Re: Word 2013 Blank Page

 

Hi, Rayette. Can you or anyone else explain when "alt-n, n, p" would be needed in lieu of control-enter to create a new page. I can't think of a situation. Thanks.

-----Original Message-----
From: Rayette Rucker [mailto:ruckerr9@...]
Sent: Sunday, January 10, 2016 8:18 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Alt n, n, p


-----Original Message-----
From: Brian Smith [mailto:briansmith372@...]
Sent: Sunday, January 10, 2016 7:11 PM
To: jfw@groups.io
Subject: Word 2013 Blank Page

Hello:

How can I insert a blank page into a Word 2013 document?  Is there a
keyboard command that I can use to insert a blank page into a Word 2013
document?  Thanks for any help.

Brian Smith










Re: Filling In the EDIT field on Facebook

David Moore
 

Hi,
I use the Facebook mobile site, but Firefox does not work for me at all with it. I have to use IE11 or Google Chrome on the mobile site. I don’t know what happens with Firefox on Facebook, but I can’t comment and like either. IE 11 is still the best for working with the mobile site by far. This is why you need two or even three browsers, because one browser works better on one site, and another browser works better on the second site and so on. I use all three browsers for different web sites. Have a great one. IE 11 is the best browser for FB by far.
 
 

Sent: Monday, January 18, 2016 1:09 PM
Subject: Re: Filling In the EDIT field on Facebook
 

There is no link to delete it.  I also haven’t been able to respond to face book posts since changing to Firefox.  Judith

 

From: Kevin Wollenweber [mailto:dancingweed@...]
Sent: Monday, January 18, 2016 12:39 PM
To: jfw@groups.io
Subject: Filling In the EDIT field on Facebook

 

Has anyone had problems with Facebook., lately?  I’ve tried posting comments, but only the first letter comes out!!  Then, I don’t know how to take the post down and try again, because there doesn’t seem to be any link to delete it.

 

Any help would be appreciated.

 

Kevin

This email has been sent from a virus-free computer protected by Avast.
www.avast.com


Re: Word 2013 Blank Page

Mike B <mb69mach1@...>
 

Hi Adrian,
 
I'm totally sorry!  I mistook new page for new document!
Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----
Sent: Monday, January 18, 2016 12:45 PM
Subject: Re: Word 2013 Blank Page

Kimsan and Mike, the only problem with your posts, which I say with affection, is that they have nothing to do with my query. I didn’t write “control-n,” but alt-n, followed by n, followed by p.

 

I remain curious whether there’s a practical difference between the page break and new page commands.

 

From: Kimsan [mailto:kimsansong@...]
Sent: Monday, January 18, 2016 3:32 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

You’re on point bro. Those do exactly as advertised, even in 2013.

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Monday, January 18, 2016 12:00 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Hi Adrian,

 

I believe, Control + Enter, creates a page break.  Control + N, opens a new document, at least that's the way it works in Word 2010.

Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----

Sent: Monday, January 18, 2016 3:03 AM

Subject: Re: Word 2013 Blank Page

 

Hi, Rayette. Can you or anyone else explain when "alt-n, n, p" would be needed in lieu of control-enter to create a new page. I can't think of a situation. Thanks.

-----Original Message-----
From: Rayette Rucker [mailto:ruckerr9@...]
Sent: Sunday, January 10, 2016 8:18 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Alt n, n, p


-----Original Message-----
From: Brian Smith [mailto:briansmith372@...]
Sent: Sunday, January 10, 2016 7:11 PM
To: jfw@groups.io
Subject: Word 2013 Blank Page

Hello:

How can I insert a blank page into a Word 2013 document?  Is there a
keyboard command that I can use to insert a blank page into a Word 2013
document?  Thanks for any help.

Brian Smith










FaceBook again. Paid support.

Tusing <ptusing@...>
 

Hi,

I  did not wish to  interrupt the good discussion of I E 11

But I am asking if some one wishes to earn a little cash

Helping me with

The

History Channel FaceBook page.

 

I have  been reading messages on the

FaceBook listand am  asking people who normally do techsupport.

But they don’t support

FaceBook.

 

If you really know FaceBook and JAWS well, please contact me off  list and we can agree and get started.

 

Yes, I am well aware of the webinars on FaceBook.

Thank you.


Re: Word 2013 Blank Page

Adrian Spratt
 

Kimsan and Mike, the only problem with your posts, which I say with affection, is that they have nothing to do with my query. I didn’t write “control-n,” but alt-n, followed by n, followed by p.

 

I remain curious whether there’s a practical difference between the page break and new page commands.

 

From: Kimsan [mailto:kimsansong@...]
Sent: Monday, January 18, 2016 3:32 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

You’re on point bro. Those do exactly as advertised, even in 2013.

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Monday, January 18, 2016 12:00 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Hi Adrian,

 

I believe, Control + Enter, creates a page break.  Control + N, opens a new document, at least that's the way it works in Word 2010.

Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----

Sent: Monday, January 18, 2016 3:03 AM

Subject: Re: Word 2013 Blank Page

 

Hi, Rayette. Can you or anyone else explain when "alt-n, n, p" would be needed in lieu of control-enter to create a new page. I can't think of a situation. Thanks.

-----Original Message-----
From: Rayette Rucker [mailto:ruckerr9@...]
Sent: Sunday, January 10, 2016 8:18 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Alt n, n, p


-----Original Message-----
From: Brian Smith [mailto:briansmith372@...]
Sent: Sunday, January 10, 2016 7:11 PM
To: jfw@groups.io
Subject: Word 2013 Blank Page

Hello:

How can I insert a blank page into a Word 2013 document?  Is there a
keyboard command that I can use to insert a blank page into a Word 2013
document?  Thanks for any help.

Brian Smith










Re: Word 2013 Blank Page

Kimsan <kimsansong@...>
 

The only thing I can think of is CTRL enter was never heard of to have them
use the keytip listed below.

I use CTRL enter as the keytip is just to many letters to remember, lol.

-----Original Message-----
From: Adrian Spratt [mailto:Adrian@AdrianSpratt.com]
Sent: Monday, January 18, 2016 3:03 AM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Hi, Rayette. Can you or anyone else explain when "alt-n, n, p" would be
needed in lieu of control-enter to create a new page. I can't think of a
situation. Thanks.

-----Original Message-----
From: Rayette Rucker [mailto:ruckerr9@gmail.com]
Sent: Sunday, January 10, 2016 8:18 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Alt n, n, p


-----Original Message-----
From: Brian Smith [mailto:briansmith372@verizon.net]
Sent: Sunday, January 10, 2016 7:11 PM
To: jfw@groups.io
Subject: Word 2013 Blank Page

Hello:

How can I insert a blank page into a Word 2013 document? Is there a
keyboard command that I can use to insert a blank page into a Word 2013
document? Thanks for any help.

Brian Smith


Re: Word 2013 Blank Page

Kimsan <kimsansong@...>
 

You’re on point bro. Those do exactly as advertised, even in 2013.

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Monday, January 18, 2016 12:00 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

 

Hi Adrian,

 

I believe, Control + Enter, creates a page break.  Control + N, opens a new document, at least that's the way it works in Word 2010.

Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----

Sent: Monday, January 18, 2016 3:03 AM

Subject: Re: Word 2013 Blank Page

 

Hi, Rayette. Can you or anyone else explain when "alt-n, n, p" would be needed in lieu of control-enter to create a new page. I can't think of a situation. Thanks.

-----Original Message-----
From: Rayette Rucker [mailto:ruckerr9@...]
Sent: Sunday, January 10, 2016 8:18 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Alt n, n, p


-----Original Message-----
From: Brian Smith [mailto:briansmith372@...]
Sent: Sunday, January 10, 2016 7:11 PM
To: jfw@groups.io
Subject: Word 2013 Blank Page

Hello:

How can I insert a blank page into a Word 2013 document?  Is there a
keyboard command that I can use to insert a blank page into a Word 2013
document?  Thanks for any help.

Brian Smith











Re: Rumola; Does anyone know whether the problem with Webvisum not working with the latest version of Firefox has been fixed?

Adrian Spratt
 

Gerald,

Thank you for going to this trouble. I've succeeded in adding Rumola to my IE favorites bar. Unfortunately, clicking on it is giving me a message that I've used up my free CAPTCHAs (I haven't used it for a single one) and that I must click on OK. I press OK, but I'm returned to my homepage. I've written to the website's tech support to explain the problem.

FYI, on my system, pressing enter at the very end of your step 1 led nowhere. Skip that step and all is well. That is, on the link, instead of pressing enter, go into the contexts menu and arrow up twice to the "Add favorites..." option.

-----Original Message-----
From: Gerald Levy [mailto:bwaylimited@verizon.net]
Sent: Monday, January 18, 2016 10:19 AM
To: jfw@groups.io
Subject: Re: Rumola; Does anyone know whether the problem with Webvisum not working with the latest version of Firefox has been fixed?


Okay, here's the steps for getting Rumola to work with IE:

1. Access the Rumola web site (http://skipinput.com/), and press "H"
repeatedly until you land on the heading labeled "Bookmarklet". Then tab to
the link labeled "...Rumola" and press Enter.
2. Launch the Context menu and scroll all the way down to the Add to
Favorites dialog. Tab to the combo box and scroll down the list once to
choose Favorites bar and then tab to the Add button and activate it.
3. Once Rumola is in the Favorites bar, activate it for the first time and
you should be presented with a web page for purchasing credits which are 99
cents for 50 captcha credits, which are good for a year. You can pay with
PayPal or a major credit/credit card. Once your account has been activated,
you will receive an email with your user-ID (usually your email address) and
password. Be sure to save this email so that you have a record of your
password for future reference should you need it, although you will be
logged in initially.
4. Now Rumola is ready to use. Using IE, whenever you encounter a web page
that contains an image captcha, press Control-I to launch the favorites
list, scroll to the favorites bar by pressing "F" repeatedly, and hit Enter
when you land on Rumola. The captcha will be solved almost instantly and
placed in the correct edit field, and one credit will be deducted from your
account. Keep checking this edit field to be sure that the result is there;
there is no audible feedback to alert you that the captcha has been solve.
5. If you want to test Rumola, visit the following sample image captcha
page and activate Rumola from the IE favorites bar. The result will be
placed in the field labeled "2+3=". Note that if you refresh this page, a
new image captcha will be presented. This is only a test page, not a real
account creation page:

http://www.captchacreator.com/v-examples.html

That's it. Good luck!

Gerald



-----Original Message-----
From: Adrian Spratt
Sent: Monday, January 18, 2016 8:35 AM
To: jfw@groups.io
Subject: Re: Rumola; Does anyone know whether the problem with Webvisum not
working with the latest version of Firefox has been fixed?

Gerald,

Great sales pitch that got me to install Rumola as a Firefox extension.
However, could you give the steps for how to get Rumola to IE favorites?

-----Original Message-----
From: Gerald Levy [mailto:bwaylimited@verizon.net]
Sent: Monday, January 18, 2016 6:23 AM
To: jfw@groups.io
Subject: Re: Does anyone know whether the problem with webvisum not working
with the latest version of firefox has been fixed?


Yes, absolutely. Rumola works perfectly with IE. You simply place the
Rumola app in the IE favorites bar, and whenever you encounter a web page
that contains an image captcha, you launch it from the favorites bar, and it
will place the captcha result in the correct edit field automatically.
Trust me. I know it works with IE because I have tested it extensively.
Last week, for instance, I unexpectedly encountered a captcha on the log-in
page for the New York State Department of Taxation and Finance. I simply
pressed Control-I to launch the IE favorites list, scrolled to the favorites
bar, launched Rumola, and almost instantaneously, the captcha result was
placed in the correct edit field. That's all there is to it.

Gerald



-----Original Message-----
From: Chris Chaffin
Sent: Sunday, January 17, 2016 7:05 PM
To: jfw@groups.io
Subject: Re: Does anyone know whether the problem with webvisum not working
with the latest version of firefox has been fixed?

Are you sure that Rumola works with Internet Explorer?
From the information I found, it works with Firefox, Chrome, and Safari, but
says nothing about Internet Explorer.

Chris


On Jan 17, 2016, at 5:22 PM, Gerald Levy <bwaylimited@verizon.net> wrote:

Rumola


Re: Word 2013 Blank Page

Mike B <mb69mach1@...>
 

Hi Adrian,
 
I believe, Control + Enter, creates a page break.  Control + N, opens a new document, at least that's the way it works in Word 2010.
Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----
Sent: Monday, January 18, 2016 3:03 AM
Subject: Re: Word 2013 Blank Page

Hi, Rayette. Can you or anyone else explain when "alt-n, n, p" would be needed in lieu of control-enter to create a new page. I can't think of a situation. Thanks.

-----Original Message-----
From: Rayette Rucker [mailto:ruckerr9@...]
Sent: Sunday, January 10, 2016 8:18 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Alt n, n, p


-----Original Message-----
From: Brian Smith [mailto:briansmith372@...]
Sent: Sunday, January 10, 2016 7:11 PM
To: jfw@groups.io
Subject: Word 2013 Blank Page

Hello:

How can I insert a blank page into a Word 2013 document?  Is there a
keyboard command that I can use to insert a blank page into a Word 2013
document?  Thanks for any help.

Brian Smith












Re: Word 2013 Blank Page

Carolyn Arnold <4carolyna@...>
 

I wondered that too.

Bye for now,

Carolyn

-----Original Message-----
From: Adrian Spratt [mailto:Adrian@AdrianSpratt.com]
Sent: Monday, January 18, 2016 6:03 AM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Hi, Rayette. Can you or anyone else explain when "alt-n, n, p" would be
needed in lieu of control-enter to create a new page. I can't think of a
situation. Thanks.

-----Original Message-----
From: Rayette Rucker [mailto:ruckerr9@gmail.com]
Sent: Sunday, January 10, 2016 8:18 PM
To: jfw@groups.io
Subject: Re: Word 2013 Blank Page

Alt n, n, p


-----Original Message-----
From: Brian Smith [mailto:briansmith372@verizon.net]
Sent: Sunday, January 10, 2016 7:11 PM
To: jfw@groups.io
Subject: Word 2013 Blank Page

Hello:

How can I insert a blank page into a Word 2013 document? Is
there a keyboard command that I can use to insert a blank page into a
Word 2013 document? Thanks for any help.

Brian Smith


Re: What happens with Edit fields in I E 11 with JAWS 15, latest JAWS 16 & 17?

Tusing <ptusing@...>
 

Hi,
Thanks, Maria,
The editfield info on JAWS 15 is helpful as the Adobe issue is still not fixed in later JAWS versions
As of 1 week ago
For years tech support has said including last week that JAWS versions are independent of one another--to answer Brian's question--and for that reason a person
Might use an older version for stability or
Simply to reliably use Adobe as in my case.

-----Original Message-----
From: Maria Campbell [mailto:lucky1@ct.metrocast.net]
Sent: Monday, January 18, 2016 12:37 PM
To: jfw@groups.io
Subject: Re: What happens with Edit fields in I E 11 with JAWS 15, latest JAWS 16 & 17?

I'm happy to report that I don't have that problem.
My forms mode works just fine in JAWS 15, which I find more stable than
16 or 17.


On 1/18/2016 11:25 AM, ptusing wrote:
Hi,

Wow.

Thank you for this warning.

Is any one else unable to use forms mode in earlier JAWS versions after

Install of JAWS 17?

That is not supposed to happen.

If this is a sampling of issues,

Then

F S needs to hear about this.

*From:*Kimber Gardner [mailto:kimbersinbox1963@gmail.com]
*Sent:* Monday, January 18, 2016 6:24 AM
*To:* jfw@groups.io
*Subject:* Re: What happens with Edit fields in I E 11 with JAWS 15,
latest JAWS 16 & 17?

I haven't been able to invoke forms mode in jaws 15 ever since
installing jaws 17. I know that the functionality of forms mode is a bit
different in jaws 17 and figured something got corrupted. I'm running
Windows 7 and I.E.11 and have this same on both my work and personal
laptops. It's not a solution, but sort of nice to know it isn't just me.



Sent from Kimber's iPhone


On Jan 17, 2016, at 11:05 PM, ptusing <ptusing@sbcglobal.net
<mailto:ptusing@sbcglobal.net>> wrote:

Hi,

Please indicate if one can enter text into edit fields using

I E 11 with

JAWS 15,

Latest JAWS 16 and

JAWS 17 version?

The imput on This great list and the excellent posts here can
give people

An idea as to how prevalent a problem is so a solution can be
hopefully found.

I really do appreciate it when a JAWS user spends hours of time
working with F S as Tom did to get a problem solved.

--

Sunny Day
Maria Campbell
lucky1@ct.metrocast.net

Be patient with God: Be patient with yourself: Be patient with others.


Re: IE 11 Successfully Installed Here, Well, Sort Of

Londa Peterson
 

I'm curious whether or not this is really a JAWS problem. Have you tried this with sighted assistance and no screen reader? Also, have you tried it with NVDA or some other similar product? Just curious and trying to help get to the bottom of this.

 

From: amit aggarwal [mailto:aggarwal.amit444@...]
Sent: Monday, January 18, 2016 6:11 AM
To: jfw@groups.io
Subject: Re: IE 11 Successfully Installed Here, Well, Sort Of

 

Hi Tom,
I'm working with IE11 on windows8.1 and JAWS17
But I couldn't found any issues.
Have you tried re-installing JAWS?
Firefox is a good browser, but IE is great.
Also, witch OS are you using?
Let's see if this problem can be fixed.
Regards,
Amit

On 1/18/2016 1:30 AM, Tom Behler wrote:

Hello, everyone.

 

As some of you may remember, I have been reluctant to move from IE 10 to IE 11, because of problems I had last summer with IE 11 in terms of being able to enter text into text boxes on web sites that I access.

 

However, since I now have been forced to upgrade to IE 11 due to no Microsoft support for IE 10, I decided to take the leap today, and install IE 11.

 

I installed IE 11 from the .exe file that I downloaded and saved from the Microsoft web site, and the installation seemed to go well.

 

I also was pleasantly surprised to find that my internet favorites had all been preserved, even though I had saved my favorites folder as a back-up, in case something went wrong.

 

However, this is where the good news ends.

 

I’m now back to having the same text-entry problems I had last summer.  I had my sighted wife watch while I ttried entering text into edit boxes, and she tells me that my main  cursor does not move when I try to do so.  As I enter text, Jaws speaks the text, but it is not entered into the web form.  I have Jaws set to manually enter forms mode, so I know I’m in forms mode, since I get the higher-sounding click whenever I hit enter.

 

I have made sure all add-ons, extensions, and toolbars  are disabled, but so far, no joy!

 

Last summer when I had this issue, I worked with Freedom Scientific  Technical Support, with the Microsoft Accessibility hotline staff, and with another well-experienced Jaws user from this list, and we could never solve the issue.

 

At least I have Firefox now as my main internet browser, and that works fine!

 

If anyone has any other suggestions of things for me to try, please send them my way.

 

I am extremely frustrated with Internet Explorer at this point!

 

Dr.  Tom Behler from Michigan

 

 


Re: What happens with Edit fields in I E 11 with JAWS 15, latest JAWS 16 & 17?

Londa Peterson
 

I don't have trouble with edit fields in any version of JAWS and/or any version of IE. I don't doubt that the problems are real; I'm just not experiencing them.

 

From: David Moore [mailto:jesusloves1966@...]
Sent: Sunday, January 17, 2016 11:10 PM
To: jfw@groups.io
Subject: Re: What happens with Edit fields in I E 11 with JAWS 15, latest JAWS 16 & 17?

 

Hi,

JAWS 15 works great with IE 11 in regard to filling out edit fields. Have a great one

 

From: ptusing

Sent: Sunday, January 17, 2016 11:05 PM

Subject: What happens with Edit fields in I E 11 with JAWS 15, latest JAWS 16 & 17?

 

Hi,

Please indicate if   one can  enter text into edit fields using

I E 11 with

JAWS 15,

Latest JAWS 16 and

JAWS 17 version?

The   imput on   This great list and the excellent posts here can give people

An idea as to how prevalent a problem is so a solution can be hopefully found.

 

I really do appreciate it when a JAWS user spends hours of time working with F S as Tom did  to  get a problem solved.


Re: Filling In the EDIT field on Facebook

judith bron
 

There is no link to delete it.  I also haven’t been able to respond to face book posts since changing to Firefox.  Judith

 

From: Kevin Wollenweber [mailto:dancingweed@...]
Sent: Monday, January 18, 2016 12:39 PM
To: jfw@groups.io
Subject: Filling In the EDIT field on Facebook

 

Has anyone had problems with Facebook., lately?  I’ve tried posting comments, but only the first letter comes out!!  Then, I don’t know how to take the post down and try again, because there doesn’t seem to be any link to delete it.

 

Any help would be appreciated.

 

Kevin

This email has been sent from a virus-free computer protected by Avast.
www.avast.com


Re: What happens with Edit fields in I E 11 with JAWS 15, latest JAWS 16 & 17?

Maria Campbell
 

I agree. Some work with you, some won't.

On 1/18/2016 11:55 AM, Adrian Spratt wrote:
In my experience, it depends on which FS tech support person you speak to. Some get why we each find earlier versions of JAWS useful for certain features and websites. That said, I'm sure they're encouraged to solve problems only in the current version.

-----Original Message-----
From: Kimber Gardner [mailto:kimbersinbox1963@gmail.com]
Sent: Monday, January 18, 2016 12:34 PM
To: jfw@groups.io
Subject: Re: What happens with Edit fields in I E 11 with JAWS 15, latest JAWS 16 & 17?

I don't think FS is all that interested, frankly. The response when I
brought the problem to their attention was pretty much, if you have 16
and 17 why even worry about whether forms mode works in 15? Just use
the current version.

Kimber

On 1/18/16, ptusing <ptusing@sbcglobal.net> wrote:
Hi,

Wow.

Thank you for this warning.

Is any one else unable to use forms mode in earlier JAWS versions after

Install of JAWS 17?

That is not supposed to happen.

If this is a sampling of issues,



Then

F S needs to hear about this.





From: Kimber Gardner [mailto:kimbersinbox1963@gmail.com]
Sent: Monday, January 18, 2016 6:24 AM
To: jfw@groups.io
Subject: Re: What happens with Edit fields in I E 11 with JAWS 15, latest
JAWS 16 & 17?



I haven't been able to invoke forms mode in jaws 15 ever since installing
jaws 17. I know that the functionality of forms mode is a bit different in
jaws 17 and figured something got corrupted. I'm running Windows 7 and
I.E.11 and have this same on both my work and personal laptops. It's not a
solution, but sort of nice to know it isn't just me.



Sent from Kimber's iPhone


On Jan 17, 2016, at 11:05 PM, ptusing <ptusing@sbcglobal.net> wrote:

Hi,

Please indicate if one can enter text into edit fields using

I E 11 with

JAWS 15,

Latest JAWS 16 and

JAWS 17 version?

The imput on This great list and the excellent posts here can give
people

An idea as to how prevalent a problem is so a solution can be hopefully
found.



I really do appreciate it when a JAWS user spends hours of time working with
F S as Tom did to get a problem solved.



--

Sunny Day
Maria Campbell
lucky1@ct.metrocast.net

Be patient with God: Be patient with yourself: Be patient with others.


Re: What happens with Edit fields in I E 11 with JAWS 15, latest JAWS 16 & 17?

Adrian Spratt
 

In my experience, it depends on which FS tech support person you speak to. Some get why we each find earlier versions of JAWS useful for certain features and websites. That said, I'm sure they're encouraged to solve problems only in the current version.

-----Original Message-----
From: Kimber Gardner [mailto:kimbersinbox1963@gmail.com]
Sent: Monday, January 18, 2016 12:34 PM
To: jfw@groups.io
Subject: Re: What happens with Edit fields in I E 11 with JAWS 15, latest JAWS 16 & 17?

I don't think FS is all that interested, frankly. The response when I
brought the problem to their attention was pretty much, if you have 16
and 17 why even worry about whether forms mode works in 15? Just use
the current version.

Kimber

On 1/18/16, ptusing <ptusing@sbcglobal.net> wrote:
Hi,

Wow.

Thank you for this warning.

Is any one else unable to use forms mode in earlier JAWS versions after

Install of JAWS 17?

That is not supposed to happen.

If this is a sampling of issues,



Then

F S needs to hear about this.





From: Kimber Gardner [mailto:kimbersinbox1963@gmail.com]
Sent: Monday, January 18, 2016 6:24 AM
To: jfw@groups.io
Subject: Re: What happens with Edit fields in I E 11 with JAWS 15, latest
JAWS 16 & 17?



I haven't been able to invoke forms mode in jaws 15 ever since installing
jaws 17. I know that the functionality of forms mode is a bit different in
jaws 17 and figured something got corrupted. I'm running Windows 7 and
I.E.11 and have this same on both my work and personal laptops. It's not a
solution, but sort of nice to know it isn't just me.



Sent from Kimber's iPhone


On Jan 17, 2016, at 11:05 PM, ptusing <ptusing@sbcglobal.net> wrote:

Hi,

Please indicate if one can enter text into edit fields using

I E 11 with

JAWS 15,

Latest JAWS 16 and

JAWS 17 version?

The imput on This great list and the excellent posts here can give
people

An idea as to how prevalent a problem is so a solution can be hopefully
found.



I really do appreciate it when a JAWS user spends hours of time working with
F S as Tom did to get a problem solved.




--
Kimberly


Re: JAWS 17 and Copying Web text

Adrian Spratt
 

Actually, I’m more surprised that for me, at least, the copy setting I elect stays constant until I change it. The change is made in JAWS quick settings, where many settings are one-time. That said, this may be one more reason to use the MS Word special paste feature, control-alt-v. It involves only one more key press than a simple control-v paste command.

 

From: Don Moore [mailto:donmoore@...]
Sent: Monday, January 18, 2016 12:32 PM
To: jfw@groups.io
Subject: Re: JAWS 17 and Copying Web text

 

Hi Bill, Mike and Darran,

 

                I do use the “Select and Copy from Virtual Cursor” option to copy text from IE to the clipboard and then paste it into a Word document. However, I have encountered a continuing problem using this option with Windows 10, JAWS 17 and IE 11:

 

If I press Insert v when in a web page in IE and choose the “Select and Copy from Virtual Cursor” and then press Enter on the OK button, it does work for a while. However, the next time I go to a web page and copy that page to the clipboard and paste it into a Word document, it might work or it might revert to the default option, which is “Select and Copy Full Content Using Onscreen Highlight.”

 

                I contacted FS about this, but anything I have tried hasn’t succeeded.

 

                Any suggestions will be appreciated.

 

                Don

 

From: Bill White [mailto:billwhite92701@...]
Sent: Saturday, January 16, 2016 6:00 PM
To: jfw@groups.io
Subject: Re: JAWS 17 and Copying Web text

 

Hi, Mike. You Wrote:

 

3. If you choose the, From Virtual Cursor option, this copies the text with formatting.  If you choose the, Full Content Using Onscreen Highlight option, this will copy the text without formatting.

 

Actually, it is the reverse. If you choose the, From Virtual Cursor, option, it will copy plain text. If you choose the, Full Content Using Onscreen Highlight, option, it will copy full content including formatting.

Bill White billwhite92701@...

----- Original Message -----

From: Mike B.

Sent: Saturday, January 16, 2016 2:27 PM

Subject: Re: JAWS 17 and Copying Web text

 

Hi Darran,

 

Another option to try is:

1. While in IE, you didn't say which browser so I'm assuming IE, press, Insert / Jaws Key, to open Quick Settings Internet Explorer.

2. Arrow down to, Virtual Cursor Options, & under this heading is Select & Copy, & here you have 2 choices which you press the spacebar to toggle between them.

3. If you choose the, From Virtual Cursor option, this copies the text with formatting.  If you choose the, Full Content Using Onscreen Highlight option, this will copy the text without formatting.

Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

----- Original Message -----

Sent: Saturday, January 16, 2016 12:24 PM

Subject: Re: JAWS 17 and Copying Web text

 

Try shift-control-v, then arrow down through the options.

 

From: Darran Ross [mailto:darran.ross@...]
Sent: Saturday, January 16, 2016 2:52 PM
To: jfw@groups.io
Subject: JAWS 17 and Copying Web text

 

Hi List.

 

I'm having a brain freeze here, and I can't remember for the life of me which setting I need to alter to allow me to copy and paste text from a webpage into a word document?

 

At the moment what I'm copying is not what's being pasted!

 

I've been into the Settings Centre, but I can't find the relevant check box, or even recall what it is I should be looking for. My stumbling about in there is getting me nowhere in a hurry!

 

Any and all help gratefully received.

 

Thanks.

 

Darran

 

 

 



__________ Information from ESET NOD32 Antivirus, version of virus signature database 12880 (20160116) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus signature database 12880 (20160116) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com