Date   

Re: Need a new scanner.

Carolyn Arnold <4carolyna@...>
 

Peter, I did get a Cannon
3500. We haven't fooled with
much scanning, because I had
so much to learn with Outlook
and Windows 10, making the big
jump from XP and Outlook
Express. Before we installed
the ABBYY Fine Reader, we
scanned something. I copied
the picture, took it to
Microsoft Word, pasted it into
a word file and could read it.
This one has the glass tray
for scanning. The slot for
printing is different, and it
has guides that you can bring
together by moving only the
right one, and the left one
moves symmetrically with the
right one to print smaller
material. We had to put my
checks in landscape, but
they're going through fine.
The Cannon 3500 does have the
buttons on the top and not
under a screen. We saw several
models of printers at
OfficeMax that did have button
displays on them.

Bye for now,

Carolyn

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Peter
Tesar via Jfw
Sent: Saturday, September 19,
2015 7:52 PM
To: jfw@lists.the-jdh.com
Cc: Peter Tesar
<ptesar@ca.inter.net>
Subject: Need a new scanner.

Hello List,

I need to get a new scanner.
The problem is that the
technology has changed over 20
years. Can a blind person do a
simple scan, without sighted
assistance, on these new types
of scanners?

The old scanning process was
simple. My old HP scanner is a
flat bed.

Just lift the lid, place the
letter size page face down and
close the lid. Then I could
use the HP software to start
the scan.

The HP scanner also had
physical buttons for e-mail,
PDF and even copy to the
default printer.

My online browsing of scanners
makes me wonder if I will have
a problem.
The Brother ATS-1000w has
dimensions less than a letter
size paper.

11 inches wide, 4 inches deep
& 3 inches high.

It also has a 20 sheet feeder.
It also has a touch screen
display.

I assume that there is no flat
bed. Maybe a slot. Maybe an
attachment to hold the
document or photo which means
the foot print is larger than
listed.

I already have a Brother Laser
printer. The Brother Creative
Center is very accessible with
JAWS.

Online shopping is limited in
the information presented. I
would appreciate any comments
on possible problems that I
might encounter after getting
the scanner home and set up.

Peter T.

-------------- next part
--------------
An HTML attachment was
scrubbed...
URL:
<http://lists.the-jdh.com/pipe
rmail/jfw_lists.the-jdh.com/at
tachments/20150919/ba3be135/at
tachment.html>
______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


how do i get access to the windows structure of a program that i would like to script?

David Ingram
 

Hi list members, I'm interested in writing jaws scripts for some programs
but I'd like to know how do I get the windows structure of a program that I
would like to script? P.S.What is the proper window classes for programs
that do not have jaws scripts written for them? Where can I get this list
from as an example, I'm using a mccafee product called mcafee live sate for
internet security but I would like to script the link that says manage
security as well as the following, updates, virus and malware, the different
scanning possibilities. I'm not sure if I'm explaining how the program
should be scripted but this is an idea of what graphical buttons are
represented. I'm not sure how to script for these buttons. Thank you for
any information that you might have.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20150919/4ecb832b/attachment.html>


Need a new scanner.

Peter Tesar
 

Hello List,

I need to get a new scanner. The problem is that the technology has changed over 20 years. Can a blind person do a simple scan, without sighted assistance, on these new types of scanners?

The old scanning process was simple. My old HP scanner is a flat bed.

Just lift the lid, place the letter size page face down and close the lid. Then I could use the HP software to start the scan.

The HP scanner also had physical buttons for e-mail, PDF and even copy to the default printer.

My online browsing of scanners makes me wonder if I will have a problem. The Brother ATS-1000w has dimensions less than a letter size paper.

11 inches wide, 4 inches deep & 3 inches high.

It also has a 20 sheet feeder. It also has a touch screen display.

I assume that there is no flat bed. Maybe a slot. Maybe an attachment to hold the document or photo which means the foot print is larger than listed.

I already have a Brother Laser printer. The Brother Creative Center is very accessible with JAWS.

Online shopping is limited in the information presented. I would appreciate any comments on possible problems that I might encounter after getting the scanner home and set up.

Peter T.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20150919/ba3be135/attachment.html>


office word 2007

Jane Withers <pitre4@...>
 

How do you set for automatic completion when trying to open file in word
2007.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20150919/1f080260/attachment.html>


testing my new email address...

Kimsan <kimsansong@...>
 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20150919/7cdf8d5a/attachment.html>


Re: JAWS scripting

Guy Schlosser
 

Hi and thanks for the reply. Will hotspot quicker work even if the window does not appear at the same position every time? If so, that's a great idea. The frames, I tried, but had no success. . The scripts I rode for it work, but just trying to gain a little more accuracy as far as finding the information. Thanks for the reply though, I really appreciate it.

Sent from my iPhone

On Sep 19, 2015, at 3:43 AM, Soronel Haetir via Jfw <jfw@lists.the-jdh.com> wrote:

I've never had need of them myself but for the first problem, if the
information is always in the same spot on screen you might want to
look at the jaws' frames facility. As I understand it a frame is sort
of like a virtual window jaws lays on top of the real window and you
can then get the text within the frame or be informed when the text
changes.

And for the dialer, again I've never had need of it myself but there
is a package called hot spot clicker maintained by a list member that
may be of assistance, again especially if the window always appears at
the same screen coordinates (or possibly at the same offset from its
parent).

As far as the list box goes have you tried assigning the listbox class
to the control? (Admittedly a long shot for apps written using modern
methods but still worth a try).



On 9/18/15, Guy Schlosser via Jfw <jfw@lists.the-jdh.com> wrote:
Hi all, if this isn’t the right place to post this, please excuse it and
direct me where to send this inquiry. I just got a new job at a
Teleperformance organization called Alliance One. They use a software
package called Facs Work station, and while it works reasonably well, there
are some issues. The first, I’m trying to write a script that tells me the
client’s name and balance before I call them. The information is at the top
of the window, in read only edit boxes that are not tabable. I use the find
string function in my script, but it doesn’t always retrieve an accurate
result. Secondly, there is a manual dialer window that pops up when you hit
shift+f-12, and I’m wondering if I can automate finding this box and moving
focus to the edit box where I can enter the phone number. Last but not
least, is there a way to make a list box read that JAWS does not read with
the PC cursor? Any help would be greatly appreciated, as it would help me
speed up doing my job tremendously.

Thanks,


Guy


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Soronel Haetir
soronel.haetir@gmail.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: The Body of An email with an Attachment

Sterling France
 

Using the HP scanner, when you are finished your message, you press alt S to
send and the first message you get is to save then you tab once and the
message is the done button and you press the space bar to send.

I did this and everyone got the email with nothing in the body.

Sterling


Fran-Coa Real Estate & Mgmt., LLC
Sterling N. France, President
Accredited Buyer Representative [ABR]
"Where quality service is our main objective"
2901 Druid Park Dr. Ste. 212
Baltimore, MD 21215
410-383-1111
410-383-3311 FAX
info@francoa.com
www.francoa.com


Our goal is to make your real estate experience a pleasant one.
If you are pleased with our service, tell a friend.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Kevin Hourigan
via Jfw
Sent: Saturday, September 19, 2015 11:40 AM
To: 'The Jaws for Windows support list.' <jfw@lists.the-jdh.com>
Cc: Kevin Hourigan <kevinthourigan@gmail.com>
Subject: RE: The Body of An email with an Attachment

Did you try Alt S to send?

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Sterling
France via Jfw
Sent: September-18-15 7:49 PM
To: 'The Jaws for Windows support list.' <jfw@lists.the-jdh.com>; 'Sterling
France' <info@francoa.com>
Cc: Sterling France <info@francoa.com>
Subject: The Body of An email with an Attachment

I am a new user of the list.



I have windows 7, JAWS 16, and Outlook 2013.



It started 3 days ago, I would scan a doc, after pressing save, the send to
comes up and I press alt HAS then my signature comes up and I press entre
and a new window comes up asking for the send to again.



I put all that info in and get down to the message body and type in my
message.



I now have all my info in, the send to, CC, title, the attachment and the
message then I tab to done and press entre.



The person I sent the email with the attachment received it but nothing was
in the body of the email. My CC came to me the same way.



Can anyone tell me what happen to the message and my signature. The
attachment and the send to, CC, date line and title were all there.



Thanks for any help.



Sterling







Fran-Coa Real Estate & Mgmt., LLC

Sterling N. France, President

Accredited Buyer Representative [ABR]

"Where quality service is our main objective"

2901 Druid Park Dr. Ste. 212

Baltimore, MD 21215

410-383-1111

410-383-3311 FAX

info@francoa.com <mailto:info@francoa.com>

www.francoa.com <http://www.francoa.com>





Our goal is to make your real estate experience a pleasant one.

If you are pleased with our service, tell a friend.



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201509
18/63ffd9c8/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Jaws 17 pleasant surprise

Carolyn Arnold <4carolyna@...>
 

You know, I asked the exact,
same question, probably a
month ago. It is what I call
using applications or right
click. It does have different
menus, according to where you
are located, so that it can
perform the appropriate tasks.
I am finding, when in doubt
about how to do something, try
"the Context Menu," and, as I
say, like you, just never had
absorbed that term for it.

Bye for now,

Carolyn

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Adrian
Spratt via Jfw
Sent: Saturday, September 19,
2015 2:10 PM
To: The Jaws for Windows
support list.
<jfw@lists.the-jdh.com>
Cc: Adrian Spratt
<Adrian@AdrianSpratt.com>
Subject: RE: Jaws 17 pleasant
surprise

The menu you get when you
press the applications key or
shift-F10. It changes
depending on which
application, or which part of
an application, is in the
current window.

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of
Kramlinger, Keith G., M.D. via
Jfw
Sent: Saturday, September 19,
2015 11:13 AM
To: 'The Jaws for Windows
support list.'
Cc: Kramlinger, Keith G., M.D.
Subject: RE: Jaws 17 pleasant
surprise

What is the contextual menu?
I'm not familiar with this
term. What is it and how is it
used? Thanks, Keith

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Carolyn
Arnold via Jfw
Sent: Friday, September 18,
2015 7:57 PM
To: 'The Jaws for Windows
support list.'
Cc: Carolyn Arnold
Subject: RE: Jaws 17 pleasant
surprise

You know, that Contextual Menu
is a good old stand by, isn't
it. So many things can be done
through it, one way or
another. I never used it to
speak of until about a month
ago and am finding that you
can do just about anything
there. I really didn't realize
what it was other than to use
properties to check an e-mail
address or just a few things
like that.

Bye for now,

Carolyn

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Tom
Behler via Jfw
Sent: Friday, September 18,
2015 8:53 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Tom Behler
<tombehler@gmail.com>
Subject: RE: Jaws 17 pleasant
surprise

That's good to know, Kimsan,
since I'm sure I'll be
upgrading to Windows 10 at
some point here.

Dr. Tom Behler from Michigan


-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Kimsan
via Jfw
Sent: Friday, September 18,
2015 7:29 PM
To: 'The Jaws for Windows
support list.'
Cc: Kimsan
Subject: RE: Jaws 17 pleasant
surprise

That method works here in
outlook 2013 windows 10. You
can also bring up the
contextual menu and do the
same.

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Tom
Behler via Jfw
Sent: Friday, September 18,
2015 3:15 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Tom Behler
<tombehler@gmail.com>
Subject: RE: Jaws 17 pleasant
surprise

Carolyn:

Well, if I open a message, and
then get out of it, I can then
go back to that message in my
message list view, highlight
it, and do control U. That
will mark it unread for me.

As I said earlier, I'm using
Outlook 2010 with Jaws 16 on a
Windows 7 PC.

Haven't tried it yet on my
Windows 7 work laptop, but I'm
hoping it will work there too.

It's very convenient.

Dr. Tom Behler From Michigan


-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Carolyn
Arnold via Jfw
Sent: Friday, September 18,
2015 5:03 PM
To: 'The Jaws for Windows
support list.'
Cc: Carolyn Arnold
Subject: RE: Jaws 17 pleasant
surprise

How do you get Control U to
mark a read message as unread?
I tried high lighting the
message and hitting Control U,
and no change takes place.

Bye for now,

Carolyn

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Tom
Behler via Jfw
Sent: Friday, September 18,
2015 4:54 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Tom Behler
<tombehler@gmail.com>
Subject: RE: Jaws 17 pleasant
surprise

Thanks Russell for the tip on
using control U for marking a
read message as un-read in
Outlook. This works for me in
Outlook 2010 with Jaws 16 on
my Windows 7 PC.

I often do this if I have an
e-mail message that I intend
to reply to, but can't do the
reply immediately.

Typically, I have marked
messages as unread by going to
the tag sub-menu, and hitting
enter on "mark as unread", but
this is so much easier.

Thanks again!

Guess you learn something new
every day!

Dr. Tom Behler from Michigan


-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Carolyn
Arnold via Jfw
Sent: Friday, September 18,
2015 10:50 AM
To: 'The Jaws for Windows
support list.'
Cc: Carolyn Arnold
Subject: RE: Jaws 17 pleasant
surprise

Russell, that is good to know.
I'll see if it does that for
me. There are times, when I
want to retain a message for a
while in order to review it
several times before deciding
whether to save it somewhere,
copy some information or just
absorb it and delete the
message.

In the past in Outlook
Express, Control U would bring
you to the next unread
message. Sometimes I'll leave
a couple of messages, because
they have information I want
to reread. In Outlook Express,
when I would come in, all I'd
have to do would be press
Control U, and that would
bring me to the next unread
message.

Bye for now,

Carolyn

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Russell
Solowoniuk via Jfw
Sent: Thursday, September 17,
2015 10:56 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Russell Solowoniuk
<rsolowoniuk@gmail.com>
Subject: RE: Jaws 17 pleasant
surprise

Hi Carolyn,

If I'm in my message list on a
message that has been read,
pressing CTRL + U marks the
message as "Unread". What did
this keystroke do in the past?
I've never used it.

Take care.

Russell

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Carolyn
Arnold via Jfw
Sent: Thursday, September 17,
2015 9:14 AM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Carolyn Arnold
<4carolyna@windstream.net>
Subject: RE: Jaws 17 pleasant
surprise

Russell, can you do Control U
to go to Unread? I hope they
get that back like it was in
the one I used to have, no
point calling names, ha.

Bye for now,

Carolyn

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Russell
Solowoniuk via Jfw
Sent: Wednesday, September 16,
2015 11:45 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Russell Solowoniuk
<rsolowoniuk@gmail.com>
Subject: RE: Jaws 17 pleasant
surprise

Yes, when I was complaining
about it earlier with Jaws 16
others told me they were not
experiencing the issue either.
I'm just glad it's working for
me now! :)

Thanks,

Russell

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Kimsan
via Jfw
Sent: Wednesday, September 16,
2015 9:29 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Kimsan
<kimsansong@gmail.com>
Subject: RE: Jaws 17 pleasant
surprise

Interesting, I can do that
here in outlook 2013 using jfw
16...
-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Russell
Solowoniuk via Jfw
Sent: Wednesday, September 16,
2015 8:05 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Russell Solowoniuk
<rsolowoniuk@gmail.com>
Subject: Jaws 17 pleasant
surprise

Hi all,

I just installed the Jaws 17
beta. I am happy to announce
that in Outlook 2013, when
reading messages, when I press
CTRL + D to delete the current
message and move to the next
message, Jaws is placed at the
top of the next message, and I
can read it as expected
without first having to press
the Alt key twice or alt tab
away and back to the message
as I had to do in Jaws 16!
For me, this is worth the
upgrade in and of itself! Good
job FS! :)

Looking forward to hearing
what everyone else thinks of
Jaws 17.

Happy testing! :)

Russell


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com

______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com

______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


Re: Jaws 17 pleasant surprise

Adrian Spratt
 

The menu you get when you press the applications key or shift-F10. It changes depending on which application, or which part of an application, is in the current window.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Kramlinger, Keith G., M.D. via Jfw
Sent: Saturday, September 19, 2015 11:13 AM
To: 'The Jaws for Windows support list.'
Cc: Kramlinger, Keith G., M.D.
Subject: RE: Jaws 17 pleasant surprise

What is the contextual menu? I'm not familiar with this term. What is it and how is it used? Thanks, Keith

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Carolyn Arnold via Jfw
Sent: Friday, September 18, 2015 7:57 PM
To: 'The Jaws for Windows support list.'
Cc: Carolyn Arnold
Subject: RE: Jaws 17 pleasant surprise

You know, that Contextual Menu
is a good old stand by, isn't
it. So many things can be done
through it, one way or
another. I never used it to
speak of until about a month
ago and am finding that you
can do just about anything
there. I really didn't realize
what it was other than to use
properties to check an e-mail
address or just a few things
like that.

Bye for now,

Carolyn

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Tom
Behler via Jfw
Sent: Friday, September 18,
2015 8:53 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Tom Behler
<tombehler@gmail.com>
Subject: RE: Jaws 17 pleasant
surprise

That's good to know, Kimsan,
since I'm sure I'll be
upgrading to Windows 10 at
some point here.

Dr. Tom Behler from Michigan


-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Kimsan
via Jfw
Sent: Friday, September 18,
2015 7:29 PM
To: 'The Jaws for Windows
support list.'
Cc: Kimsan
Subject: RE: Jaws 17 pleasant
surprise

That method works here in
outlook 2013 windows 10. You
can also bring up the
contextual menu and do the
same.

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Tom
Behler via Jfw
Sent: Friday, September 18,
2015 3:15 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Tom Behler
<tombehler@gmail.com>
Subject: RE: Jaws 17 pleasant
surprise

Carolyn:

Well, if I open a message, and
then get out of it, I can then
go back to that message in my
message list view, highlight
it, and do control U. That
will mark it unread for me.

As I said earlier, I'm using
Outlook 2010 with Jaws 16 on a
Windows 7 PC.

Haven't tried it yet on my
Windows 7 work laptop, but I'm
hoping it will work there too.

It's very convenient.

Dr. Tom Behler From Michigan


-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Carolyn
Arnold via Jfw
Sent: Friday, September 18,
2015 5:03 PM
To: 'The Jaws for Windows
support list.'
Cc: Carolyn Arnold
Subject: RE: Jaws 17 pleasant
surprise

How do you get Control U to
mark a read message as unread?
I tried high lighting the
message and hitting Control U,
and no change takes place.

Bye for now,

Carolyn

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Tom
Behler via Jfw
Sent: Friday, September 18,
2015 4:54 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Tom Behler
<tombehler@gmail.com>
Subject: RE: Jaws 17 pleasant
surprise

Thanks Russell for the tip on
using control U for marking a
read message as un-read in
Outlook. This works for me in
Outlook 2010 with Jaws 16 on
my Windows 7 PC.

I often do this if I have an
e-mail message that I intend
to reply to, but can't do the
reply immediately.

Typically, I have marked
messages as unread by going to
the tag sub-menu, and hitting
enter on "mark as unread", but
this is so much easier.

Thanks again!

Guess you learn something new
every day!

Dr. Tom Behler from Michigan


-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Carolyn
Arnold via Jfw
Sent: Friday, September 18,
2015 10:50 AM
To: 'The Jaws for Windows
support list.'
Cc: Carolyn Arnold
Subject: RE: Jaws 17 pleasant
surprise

Russell, that is good to know.
I'll see if it does that for
me. There are times, when I
want to retain a message for a
while in order to review it
several times before deciding
whether to save it somewhere,
copy some information or just
absorb it and delete the
message.

In the past in Outlook
Express, Control U would bring
you to the next unread
message. Sometimes I'll leave
a couple of messages, because
they have information I want
to reread. In Outlook Express,
when I would come in, all I'd
have to do would be press
Control U, and that would
bring me to the next unread
message.

Bye for now,

Carolyn

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Russell
Solowoniuk via Jfw
Sent: Thursday, September 17,
2015 10:56 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Russell Solowoniuk
<rsolowoniuk@gmail.com>
Subject: RE: Jaws 17 pleasant
surprise

Hi Carolyn,

If I'm in my message list on a
message that has been read,
pressing CTRL + U marks the
message as "Unread". What did
this keystroke do in the past?
I've never used it.

Take care.

Russell

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Carolyn
Arnold via Jfw
Sent: Thursday, September 17,
2015 9:14 AM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Carolyn Arnold
<4carolyna@windstream.net>
Subject: RE: Jaws 17 pleasant
surprise

Russell, can you do Control U
to go to Unread? I hope they
get that back like it was in
the one I used to have, no
point calling names, ha.

Bye for now,

Carolyn

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Russell
Solowoniuk via Jfw
Sent: Wednesday, September 16,
2015 11:45 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Russell Solowoniuk
<rsolowoniuk@gmail.com>
Subject: RE: Jaws 17 pleasant
surprise

Yes, when I was complaining
about it earlier with Jaws 16
others told me they were not
experiencing the issue either.
I'm just glad it's working for
me now! :)

Thanks,

Russell

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Kimsan
via Jfw
Sent: Wednesday, September 16,
2015 9:29 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Kimsan
<kimsansong@gmail.com>
Subject: RE: Jaws 17 pleasant
surprise

Interesting, I can do that
here in outlook 2013 using jfw
16...
-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Russell
Solowoniuk via Jfw
Sent: Wednesday, September 16,
2015 8:05 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Russell Solowoniuk
<rsolowoniuk@gmail.com>
Subject: Jaws 17 pleasant
surprise

Hi all,

I just installed the Jaws 17
beta. I am happy to announce
that in Outlook 2013, when
reading messages, when I press
CTRL + D to delete the current
message and move to the next
message, Jaws is placed at the
top of the next message, and I
can read it as expected
without first having to press
the Alt key twice or alt tab
away and back to the message
as I had to do in Jaws 16!
For me, this is worth the
upgrade in and of itself! Good
job FS! :)

Looking forward to hearing
what everyone else thinks of
Jaws 17.

Happy testing! :)

Russell


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: The Body of An email with an Attachment

Kevin Hourigan <kevinthourigan@...>
 

Did you try Alt S to send?

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Sterling
France via Jfw
Sent: September-18-15 7:49 PM
To: 'The Jaws for Windows support list.' <jfw@lists.the-jdh.com>; 'Sterling
France' <info@francoa.com>
Cc: Sterling France <info@francoa.com>
Subject: The Body of An email with an Attachment

I am a new user of the list.



I have windows 7, JAWS 16, and Outlook 2013.



It started 3 days ago, I would scan a doc, after pressing save, the send to
comes up and I press alt HAS then my signature comes up and I press entre
and a new window comes up asking for the send to again.



I put all that info in and get down to the message body and type in my
message.



I now have all my info in, the send to, CC, title, the attachment and the
message then I tab to done and press entre.



The person I sent the email with the attachment received it but nothing was
in the body of the email. My CC came to me the same way.



Can anyone tell me what happen to the message and my signature. The
attachment and the send to, CC, date line and title were all there.



Thanks for any help.



Sterling







Fran-Coa Real Estate & Mgmt., LLC

Sterling N. France, President

Accredited Buyer Representative [ABR]

"Where quality service is our main objective"

2901 Druid Park Dr. Ste. 212

Baltimore, MD 21215

410-383-1111

410-383-3311 FAX

info@francoa.com <mailto:info@francoa.com>

www.francoa.com <http://www.francoa.com>





Our goal is to make your real estate experience a pleasant one.

If you are pleased with our service, tell a friend.



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201509
18/63ffd9c8/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Jaws 17 pleasant surprise

Kramlinger, Keith G., M.D.
 

What is the contextual menu? I'm not familiar with this term. What is it and how is it used? Thanks, Keith

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Carolyn Arnold via Jfw
Sent: Friday, September 18, 2015 7:57 PM
To: 'The Jaws for Windows support list.'
Cc: Carolyn Arnold
Subject: RE: Jaws 17 pleasant surprise

You know, that Contextual Menu
is a good old stand by, isn't
it. So many things can be done
through it, one way or
another. I never used it to
speak of until about a month
ago and am finding that you
can do just about anything
there. I really didn't realize
what it was other than to use
properties to check an e-mail
address or just a few things
like that.

Bye for now,

Carolyn

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Tom
Behler via Jfw
Sent: Friday, September 18,
2015 8:53 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Tom Behler
<tombehler@gmail.com>
Subject: RE: Jaws 17 pleasant
surprise

That's good to know, Kimsan,
since I'm sure I'll be
upgrading to Windows 10 at
some point here.

Dr. Tom Behler from Michigan


-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Kimsan
via Jfw
Sent: Friday, September 18,
2015 7:29 PM
To: 'The Jaws for Windows
support list.'
Cc: Kimsan
Subject: RE: Jaws 17 pleasant
surprise

That method works here in
outlook 2013 windows 10. You
can also bring up the
contextual menu and do the
same.

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Tom
Behler via Jfw
Sent: Friday, September 18,
2015 3:15 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Tom Behler
<tombehler@gmail.com>
Subject: RE: Jaws 17 pleasant
surprise

Carolyn:

Well, if I open a message, and
then get out of it, I can then
go back to that message in my
message list view, highlight
it, and do control U. That
will mark it unread for me.

As I said earlier, I'm using
Outlook 2010 with Jaws 16 on a
Windows 7 PC.

Haven't tried it yet on my
Windows 7 work laptop, but I'm
hoping it will work there too.

It's very convenient.

Dr. Tom Behler From Michigan


-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Carolyn
Arnold via Jfw
Sent: Friday, September 18,
2015 5:03 PM
To: 'The Jaws for Windows
support list.'
Cc: Carolyn Arnold
Subject: RE: Jaws 17 pleasant
surprise

How do you get Control U to
mark a read message as unread?
I tried high lighting the
message and hitting Control U,
and no change takes place.

Bye for now,

Carolyn

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Tom
Behler via Jfw
Sent: Friday, September 18,
2015 4:54 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Tom Behler
<tombehler@gmail.com>
Subject: RE: Jaws 17 pleasant
surprise

Thanks Russell for the tip on
using control U for marking a
read message as un-read in
Outlook. This works for me in
Outlook 2010 with Jaws 16 on
my Windows 7 PC.

I often do this if I have an
e-mail message that I intend
to reply to, but can't do the
reply immediately.

Typically, I have marked
messages as unread by going to
the tag sub-menu, and hitting
enter on "mark as unread", but
this is so much easier.

Thanks again!

Guess you learn something new
every day!

Dr. Tom Behler from Michigan


-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Carolyn
Arnold via Jfw
Sent: Friday, September 18,
2015 10:50 AM
To: 'The Jaws for Windows
support list.'
Cc: Carolyn Arnold
Subject: RE: Jaws 17 pleasant
surprise

Russell, that is good to know.
I'll see if it does that for
me. There are times, when I
want to retain a message for a
while in order to review it
several times before deciding
whether to save it somewhere,
copy some information or just
absorb it and delete the
message.

In the past in Outlook
Express, Control U would bring
you to the next unread
message. Sometimes I'll leave
a couple of messages, because
they have information I want
to reread. In Outlook Express,
when I would come in, all I'd
have to do would be press
Control U, and that would
bring me to the next unread
message.

Bye for now,

Carolyn

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Russell
Solowoniuk via Jfw
Sent: Thursday, September 17,
2015 10:56 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Russell Solowoniuk
<rsolowoniuk@gmail.com>
Subject: RE: Jaws 17 pleasant
surprise

Hi Carolyn,

If I'm in my message list on a
message that has been read,
pressing CTRL + U marks the
message as "Unread". What did
this keystroke do in the past?
I've never used it.

Take care.

Russell

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Carolyn
Arnold via Jfw
Sent: Thursday, September 17,
2015 9:14 AM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Carolyn Arnold
<4carolyna@windstream.net>
Subject: RE: Jaws 17 pleasant
surprise

Russell, can you do Control U
to go to Unread? I hope they
get that back like it was in
the one I used to have, no
point calling names, ha.

Bye for now,

Carolyn

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Russell
Solowoniuk via Jfw
Sent: Wednesday, September 16,
2015 11:45 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Russell Solowoniuk
<rsolowoniuk@gmail.com>
Subject: RE: Jaws 17 pleasant
surprise

Yes, when I was complaining
about it earlier with Jaws 16
others told me they were not
experiencing the issue either.
I'm just glad it's working for
me now! :)

Thanks,

Russell

-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Kimsan
via Jfw
Sent: Wednesday, September 16,
2015 9:29 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Kimsan
<kimsansong@gmail.com>
Subject: RE: Jaws 17 pleasant
surprise

Interesting, I can do that
here in outlook 2013 using jfw
16...
-----Original Message-----
From: Jfw
[mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Russell
Solowoniuk via Jfw
Sent: Wednesday, September 16,
2015 8:05 PM
To: 'The Jaws for Windows
support list.'
<jfw@lists.the-jdh.com>
Cc: Russell Solowoniuk
<rsolowoniuk@gmail.com>
Subject: Jaws 17 pleasant
surprise

Hi all,

I just installed the Jaws 17
beta. I am happy to announce
that in Outlook 2013, when
reading messages, when I press
CTRL + D to delete the current
message and move to the next
message, Jaws is placed at the
top of the next message, and I
can read it as expected
without first having to press
the Alt key twice or alt tab
away and back to the message
as I had to do in Jaws 16!
For me, this is worth the
upgrade in and of itself! Good
job FS! :)

Looking forward to hearing
what everyone else thinks of
Jaws 17.

Happy testing! :)

Russell


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


______________________________
_________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailm
an/listinfo/jfw_lists.the-jdh.
com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: antivirus again

Jane Withers <pitre4@...>
 

It is also not a very robust protection.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Peter Tesar
via Jfw
Sent: Saturday, September 19, 2015 7:28 AM
To: jfw@lists.the-jdh.com
Cc: Peter Tesar
Subject: Re: antivirus again

Hello,

An alternative to getting 3rd anti virus software is to use the
MicroSoft software.

For Windows 7 install the MS Essentials from the MS web site. Be sure to
uninstall any anti virus software before installingthe MS product.

On Windows 10 it is MS Defender.

You should turn on the Windows firewall if you don't have any 3rd party
firewall protection.

The advantage of using the MS product is that it will be updated
frequently.
This is not perfect but it is free, and JAWS accessible.

If you are a proficient PC user, you already take precautions like not
opening suspicious eMails or links.

Other anti virus software have accessibility problems.

Peter T.

On 2015-09-18 10:49 PM, Jim Hamilton via Jfw wrote:
Well, I can tell you that I have Kaspersky, which was installed by a
techie
friend of mine. Apparently, it is 1 of the top rated such programmes,
but,
I have absolutely no JAWS interface with it!

I added Malwarebytes(anti-malware), which is more accessible than some
other
such programmes, for extra protection. However, I would still prefer to
find a "total solution" which is accessible. So, I will be checking out
Webroot and Viper.

Does anyone have any comparative information regarding the accessibility
of
these 2 products?

Jim H

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of David
Jennette
via Jfw
Sent: Friday, September 18, 2015 6:37 PM
To: 'The Jaws for Windows support list.' <jfw@lists.the-jdh.com>
Cc: David Jennette <dcjenn@bellsouth.net>
Subject: RE: antivirus again

Another security package you can try is Webroot. Again, it's not totally
accessible. You'll need to use your jaws cursor instead of being able to
tab around but when it comes to security there are going to be trade-offs.
You can run scans just fine and be able to see the results with no
problems.
I haven't found a way to get into where you can view quarantined items and
such yet but tech support is free so if worse came to worse I could have
them remote in if needed. Thing is, for the most part for general use,
it's
doable.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Robert Logue
via Jfw
Sent: Friday, September 18, 2015 5:00 PM
To: The Jaws for Windows support list. <jfw@lists.the-jdh.com>
Cc: Robert Logue <bobcat11@shaw.ca>
Subject: Re: antivirus again

I'd never heard of Viper before. I'll check it out.

Bob


On 9/18/2015 3:17 PM, Merv Keck via Jfw wrote:
Everyone has their favorites. No one wants to pay for decent
protection. All I can do is tell you what I, and some others, are
using successfully on our machines ranging from Windows 7, 8.1, and 10
with Jaws,. And that is viper Internet security. It isn't perfect and
it isn't free but then again what in life is perfect and free.
I am using the viper Internet security which has both Antivirus and
Antimalware protection and works with both Jaws 16 and 17. It has a 30
day trial if you want to check it out.
-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Maria
Campbell via Jfw
Sent: Friday, September 18, 2015 5:02 PM
To: The Jaws for Windows support list. <jfw@lists.the-jdh.com>
Cc: Maria Campbell <lucky1@ct.metrocast.net>
Subject: Re: antivirus again

The problem with anti-virus products is that they are not standardized
to be accessible. They may be so today, but not tomorrow and then
again they may be once more.
It's basically that simple. Although blind people should be as secure
as sighted people on their computers, until if and when this concept
is accepted and expected, we will continue to have this issue.


On 9/18/2015 4:35 PM, Robert Logue via Jfw wrote:
Which anti-virus and internet security programs working well
with Jaws 16?

Searching Bing for the answer to this question is not helpful. I
sure do wish people would test these things and keep a web site going
so we don't have to ask this question every time our security product
needs renewing.

Not happy with AVG any more. Thinking of Nod 32 or Caspersky.

Thanks.

Bob


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201509
19/7452a415/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: antivirus again

Peter Tesar
 

Hello,

An alternative to getting 3rd anti virus software is to use the MicroSoft software.

For Windows 7 install the MS Essentials from the MS web site. Be sure to uninstall any anti virus software before installingthe MS product.

On Windows 10 it is MS Defender.

You should turn on the Windows firewall if you don't have any 3rd party firewall protection.

The advantage of using the MS product is that it will be updated frequently.
This is not perfect but it is free, and JAWS accessible.

If you are a proficient PC user, you already take precautions like not opening suspicious eMails or links.

Other anti virus software have accessibility problems.

Peter T.

On 2015-09-18 10:49 PM, Jim Hamilton via Jfw wrote:
Well, I can tell you that I have Kaspersky, which was installed by a techie
friend of mine. Apparently, it is 1 of the top rated such programmes, but,
I have absolutely no JAWS interface with it!

I added Malwarebytes(anti-malware), which is more accessible than some other
such programmes, for extra protection. However, I would still prefer to
find a "total solution" which is accessible. So, I will be checking out
Webroot and Viper.

Does anyone have any comparative information regarding the accessibility of
these 2 products?

Jim H

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of David Jennette
via Jfw
Sent: Friday, September 18, 2015 6:37 PM
To: 'The Jaws for Windows support list.' <jfw@lists.the-jdh.com>
Cc: David Jennette <dcjenn@bellsouth.net>
Subject: RE: antivirus again

Another security package you can try is Webroot. Again, it's not totally
accessible. You'll need to use your jaws cursor instead of being able to
tab around but when it comes to security there are going to be trade-offs.
You can run scans just fine and be able to see the results with no problems.
I haven't found a way to get into where you can view quarantined items and
such yet but tech support is free so if worse came to worse I could have
them remote in if needed. Thing is, for the most part for general use, it's
doable.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Robert Logue
via Jfw
Sent: Friday, September 18, 2015 5:00 PM
To: The Jaws for Windows support list. <jfw@lists.the-jdh.com>
Cc: Robert Logue <bobcat11@shaw.ca>
Subject: Re: antivirus again

I'd never heard of Viper before. I'll check it out.

Bob


On 9/18/2015 3:17 PM, Merv Keck via Jfw wrote:
Everyone has their favorites. No one wants to pay for decent
protection. All I can do is tell you what I, and some others, are
using successfully on our machines ranging from Windows 7, 8.1, and 10
with Jaws,. And that is viper Internet security. It isn't perfect and
it isn't free but then again what in life is perfect and free.
I am using the viper Internet security which has both Antivirus and
Antimalware protection and works with both Jaws 16 and 17. It has a 30
day trial if you want to check it out.
-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Maria
Campbell via Jfw
Sent: Friday, September 18, 2015 5:02 PM
To: The Jaws for Windows support list. <jfw@lists.the-jdh.com>
Cc: Maria Campbell <lucky1@ct.metrocast.net>
Subject: Re: antivirus again

The problem with anti-virus products is that they are not standardized
to be accessible. They may be so today, but not tomorrow and then
again they may be once more.
It's basically that simple. Although blind people should be as secure
as sighted people on their computers, until if and when this concept
is accepted and expected, we will continue to have this issue.


On 9/18/2015 4:35 PM, Robert Logue via Jfw wrote:
Which anti-virus and internet security programs working well
with Jaws 16?

Searching Bing for the answer to this question is not helpful. I
sure do wish people would test these things and keep a web site going
so we don't have to ask this question every time our security product
needs renewing.

Not happy with AVG any more. Thinking of Nod 32 or Caspersky.

Thanks.

Bob


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20150919/7452a415/attachment.html>


Re: JAWS 17 does not support Eudora

ratshtron <northstar1950@...>
 

hmmm, once i get a working copy of jaws 17, i will look at recompiling them for jaws 17. am working on them for jaws 16 now.


Legend has it that on Friday 9/18/2015 06:37 PM, Ann Byrne via Jfw said:
----------------------------------------
However, if you used Eudora in a previous version of JAWS--as I did with all of them--copy the eudora scripts from your most recent working version from 'explore my settings' and 'explore shared settings', and you should be fine. Apparently none of the background changes that improve JAWS 17 have effected the old Eudora scripts adversely. Whew!


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
----------------------------------------



<http://www.sendspace.com/folder/i7xwg4>Click here to check out my sendspace offerings!


Re: vocalizer frustration

Aidan <aidan.smarttalk@...>
 

So what does this mean? Are you telling me that ava and Tessa and some
of the newer higher quality voices were cheaper than those currently
not present? I mean, Emily was lower quality than some of those and
should've being included. I smel a rat here.

On 19/09/2015, Soronel Haetir via Jfw <jfw@lists.the-jdh.com> wrote:
I suspect it is a money issue, that FS simply doesn't want to pay the
licensing fees for the highest quality voices.

The one I am disappointed about is how Emily did not survive the move
from RealSpeak Solo Direct. I like Emily enough that I still use RSD
rather than either of the vocalizer offerings.

On 9/18/15, Aidan via Jfw <jfw@lists.the-jdh.com> wrote:
Hello.
I wunder why freedom is so ignorant. The vocalizer eexpressive Cate
and Vicky are on the mac, on text allowed and dolphin guide, but only
jaws lacks behind in this. Really unexceptible.

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Soronel Haetir
soronel.haetir@gmail.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
--
Facebook: m.facebook.com/aidan.maher92
Skype: andries4451
Twitter: smarttalk7
Audioboo: www.audioboo.com/DjSpotlight


Re: vocalizer frustration

Soronel Haetir
 

I suspect it is a money issue, that FS simply doesn't want to pay the
licensing fees for the highest quality voices.

The one I am disappointed about is how Emily did not survive the move
from RealSpeak Solo Direct. I like Emily enough that I still use RSD
rather than either of the vocalizer offerings.

On 9/18/15, Aidan via Jfw <jfw@lists.the-jdh.com> wrote:
Hello.
I wunder why freedom is so ignorant. The vocalizer eexpressive Cate
and Vicky are on the mac, on text allowed and dolphin guide, but only
jaws lacks behind in this. Really unexceptible.

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
--
Soronel Haetir
soronel.haetir@gmail.com


Re: JAWS scripting

Soronel Haetir
 

I've never had need of them myself but for the first problem, if the
information is always in the same spot on screen you might want to
look at the jaws' frames facility. As I understand it a frame is sort
of like a virtual window jaws lays on top of the real window and you
can then get the text within the frame or be informed when the text
changes.

And for the dialer, again I've never had need of it myself but there
is a package called hot spot clicker maintained by a list member that
may be of assistance, again especially if the window always appears at
the same screen coordinates (or possibly at the same offset from its
parent).

As far as the list box goes have you tried assigning the listbox class
to the control? (Admittedly a long shot for apps written using modern
methods but still worth a try).

On 9/18/15, Guy Schlosser via Jfw <jfw@lists.the-jdh.com> wrote:
Hi all, if this isn’t the right place to post this, please excuse it and
direct me where to send this inquiry. I just got a new job at a
Teleperformance organization called Alliance One. They use a software
package called Facs Work station, and while it works reasonably well, there
are some issues. The first, I’m trying to write a script that tells me the
client’s name and balance before I call them. The information is at the top
of the window, in read only edit boxes that are not tabable. I use the find
string function in my script, but it doesn’t always retrieve an accurate
result. Secondly, there is a manual dialer window that pops up when you hit
shift+f-12, and I’m wondering if I can automate finding this box and moving
focus to the edit box where I can enter the phone number. Last but not
least, is there a way to make a list box read that JAWS does not read with
the PC cursor? Any help would be greatly appreciated, as it would help me
speed up doing my job tremendously.

Thanks,


Guy


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
--
Soronel Haetir
soronel.haetir@gmail.com


JAWS scripting

Guy Schlosser
 

Hi all, if this isn’t the right place to post this, please excuse it and direct me where to send this inquiry. I just got a new job at a Teleperformance organization called Alliance One. They use a software package called Facs Work station, and while it works reasonably well, there are some issues. The first, I’m trying to write a script that tells me the client’s name and balance before I call them. The information is at the top of the window, in read only edit boxes that are not tabable. I use the find string function in my script, but it doesn’t always retrieve an accurate result. Secondly, there is a manual dialer window that pops up when you hit shift+f-12, and I’m wondering if I can automate finding this box and moving focus to the edit box where I can enter the phone number. Last but not least, is there a way to make a list box read that JAWS does not read with the PC cursor? Any help would be greatly appreciated, as it would help me speed up doing my job tremendously.

Thanks,


Guy


Re: antivirus again

Debbie April Yuille
 

Hi Robert

I use Eset Smart Security. It's quite accessible, however you will need to
use the JAWS Cursor in some areas.

Debbie

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Robert Logue
via Jfw
Sent: Saturday, 19 September 2015 6:36 AM
To: The Jaws for Windows support list. <jfw@lists.the-jdh.com>
Cc: Robert Logue <bobcat11@shaw.ca>
Subject: antivirus again

Which anti-virus and internet security programs working well with
Jaws 16?

Searching Bing for the answer to this question is not helpful. I sure
do wish people would test these things and keep a web site going so we
don't have to ask this question every time our security product needs
renewing.

Not happy with AVG any more. Thinking of Nod 32 or Caspersky.

Thanks.

Bob


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: antivirus again

HAMILTON
 

Well, I can tell you that I have Kaspersky, which was installed by a techie
friend of mine. Apparently, it is 1 of the top rated such programmes, but,
I have absolutely no JAWS interface with it!

I added Malwarebytes(anti-malware), which is more accessible than some other
such programmes, for extra protection. However, I would still prefer to
find a "total solution" which is accessible. So, I will be checking out
Webroot and Viper.

Does anyone have any comparative information regarding the accessibility of
these 2 products?

Jim H

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of David Jennette
via Jfw
Sent: Friday, September 18, 2015 6:37 PM
To: 'The Jaws for Windows support list.' <jfw@lists.the-jdh.com>
Cc: David Jennette <dcjenn@bellsouth.net>
Subject: RE: antivirus again

Another security package you can try is Webroot. Again, it's not totally
accessible. You'll need to use your jaws cursor instead of being able to
tab around but when it comes to security there are going to be trade-offs.
You can run scans just fine and be able to see the results with no problems.
I haven't found a way to get into where you can view quarantined items and
such yet but tech support is free so if worse came to worse I could have
them remote in if needed. Thing is, for the most part for general use, it's
doable.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Robert Logue
via Jfw
Sent: Friday, September 18, 2015 5:00 PM
To: The Jaws for Windows support list. <jfw@lists.the-jdh.com>
Cc: Robert Logue <bobcat11@shaw.ca>
Subject: Re: antivirus again

I'd never heard of Viper before. I'll check it out.

Bob


On 9/18/2015 3:17 PM, Merv Keck via Jfw wrote:
Everyone has their favorites. No one wants to pay for decent
protection. All I can do is tell you what I, and some others, are
using successfully on our machines ranging from Windows 7, 8.1, and 10
with Jaws,. And that is viper Internet security. It isn't perfect and
it isn't free but then again what in life is perfect and free.
I am using the viper Internet security which has both Antivirus and
Antimalware protection and works with both Jaws 16 and 17. It has a 30
day trial if you want to check it out.
-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Maria
Campbell via Jfw
Sent: Friday, September 18, 2015 5:02 PM
To: The Jaws for Windows support list. <jfw@lists.the-jdh.com>
Cc: Maria Campbell <lucky1@ct.metrocast.net>
Subject: Re: antivirus again

The problem with anti-virus products is that they are not standardized
to be accessible. They may be so today, but not tomorrow and then
again they may be once more.
It's basically that simple. Although blind people should be as secure
as sighted people on their computers, until if and when this concept
is accepted and expected, we will continue to have this issue.


On 9/18/2015 4:35 PM, Robert Logue via Jfw wrote:
Which anti-virus and internet security programs working well
with Jaws 16?

Searching Bing for the answer to this question is not helpful. I
sure do wish people would test these things and keep a web site going
so we don't have to ask this question every time our security product
needs renewing.

Not happy with AVG any more. Thinking of Nod 32 or Caspersky.

Thanks.

Bob


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com