Date   

Converting PDF files to Word

Lauren
 

Hi,
Does anyone know how to use the adobe subscription service? I signed up for it so I could convert PDF files into Word files, but I can't figure out what to do. The line does anyone have a telephone number for Adobe, I can't find it.
Thanks. Sincerely,

Lauren Snyder, Ph.D.
Sent from my iPhone


Re: JAWS 16 fails to start after installation

Kimsan <kimsansong@...>
 

With the below method, not with just 16, the same exact thing happens to me
and I do the same thing.
So, I install from the .exe, reboot, nothing, activate the .exe again and
then the rest is normal.
No big deal on my part, I'm just here to state it’s the same for me.

“Success is the result of perfection, hard work, learning from failure,
loyalty and persistence.” Colin Powell

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Gerardo
Corripio via Jfw
Sent: Tuesday, November 18, 2014 9:22 AM
To: Stan Holdeman; The Jaws for Windows support list.
Subject: Re: JAWS 16 fails to start after installation

Something similar happened when I upgraded, thus when the computer
restarted, I again relaunched the Jaws16 download and away it went!
Let me explain further in case maybe you guys had the same problem: I
executed the Jaws16 download as usual; it made the clicking sounds, and
after awhile the program reported that it needed to restart the system, so I
restarted. It restarted with Jaws15 in my case, as if I'd never executed the
download! so I reexecuted the download, and away it went, performing the
Jaws16 installation nicely!

El 18/11/2014 03:57 a.m., Stan Holdeman via Jfw escribió:
For me Jaws 16 also failed to work after installing from the download.
It worked fine, though, after installing from the CD.

Stan


-----Original Message----- From: Hozefa Tambawala via Jfw
Sent: Monday, November 17, 2014 1:47 AM
To: Feliciano Godoy
Cc: The Jaws for Windows support list.
Subject: Re: JAWS 16 fails to start after installation

@ Eyeball,

As JAWS 16 is not working, I installed JAWS 15.

@ Feliciano,

Repairing JAWS didn't worked.

On 11/17/14, Feliciano Godoy <theblindman12v@...> wrote:
Repair it by running the exe or inserting the disc.
Like my Facebook page:
https://m.facebook.com/profile.php?id=690649294341327
Follow me on Twitter: Www.twitter.com/theblindman12v Sent from the
Super-iPhone

Regards, Feliciano

Sent from the Super-iPhone

On Nov 16, 2014, at 6:07 AM, Hozefa Tambawala via Jfw
<jfw@...> wrote:

Dear friends,

I am not getting JAWS output after installing JAWS 16. However,
during the JAWS setup, the JAWS is speaking without any issues. I
have restarted my system and tried to start JAWS manually but no
success.

On the same machine, JAWS 15 is running perfectly.

I am running Windows 8.1

Can anybody assist me in this regard or provide me the contact
details of Freedom Scientific tech support?

--
"Life is like a piano.
White keys are happy moments
& Black keys are sad moments.
But remember both keys are played together to give sweet music."

"Focus on your abilities, not your disability."

Follow me on Facebook:
https://www.facebook.com/starhoze

Skype ID:
star.hoze

Warm Regards,

Hozefa...

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
--
Enviado desde mi lap
Gerardo J Corripio Flores Psicólogo, Terapéuta Reiki Saludos desde Tampico,
Tamaulipas México RompiendoBarreras espacio de psicología/Superación
Personal Sábados 10PM México http://radiogeneral.com ¡los esperamos!


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: JAWS 16 fails to start after installation

Gerardo Corripio <gera1027@...>
 

Something similar happened when I upgraded, thus when the computer restarted, I again relaunched the Jaws16 download and away it went!
Let me explain further in case maybe you guys had the same problem: I executed the Jaws16 download as usual; it made the clicking sounds, and after awhile the program reported that it needed to restart the system, so I restarted. It restarted with Jaws15 in my case, as if I'd never executed the download! so I reexecuted the download, and away it went, performing the Jaws16 installation nicely!

El 18/11/2014 03:57 a.m., Stan Holdeman via Jfw escribió:
For me Jaws 16 also failed to work after installing from the download. It worked fine, though, after installing from the CD.

Stan


-----Original Message----- From: Hozefa Tambawala via Jfw
Sent: Monday, November 17, 2014 1:47 AM
To: Feliciano Godoy
Cc: The Jaws for Windows support list.
Subject: Re: JAWS 16 fails to start after installation

@ Eyeball,

As JAWS 16 is not working, I installed JAWS 15.

@ Feliciano,

Repairing JAWS didn't worked.

On 11/17/14, Feliciano Godoy <theblindman12v@...> wrote:
Repair it by running the exe or inserting the disc.
Like my Facebook page: https://m.facebook.com/profile.php?id=690649294341327
Follow me on Twitter: Www.twitter.com/theblindman12v Sent from the
Super-iPhone

Regards, Feliciano

Sent from the Super-iPhone

On Nov 16, 2014, at 6:07 AM, Hozefa Tambawala via Jfw
<jfw@...> wrote:

Dear friends,

I am not getting JAWS output after installing JAWS 16. However,
during the JAWS setup, the JAWS is speaking without any issues. I have
restarted my system and tried to start JAWS manually but no success.

On the same machine, JAWS 15 is running perfectly.

I am running Windows 8.1

Can anybody assist me in this regard or provide me the contact
details of Freedom Scientific tech support?

--
"Life is like a piano.
White keys are happy moments
& Black keys are sad moments.
But remember both keys are played together to give sweet music."

"Focus on your abilities, not your disability."

Follow me on Facebook:
https://www.facebook.com/starhoze

Skype ID:
star.hoze

Warm Regards,

Hozefa...

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
--
Enviado desde mi lap
Gerardo J Corripio Flores Psicólogo, Terapéuta Reiki
Saludos desde Tampico, Tamaulipas México
RompiendoBarreras espacio de psicología/Superación Personal Sábados 10PM México http://radiogeneral.com ¡los esperamos!


Re: media players

Lisle, Ted (CHFS DMS)
 

Cool, any hidden set-and-forget resume command in there?

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Brad Martin via Jfw
Sent: Monday, November 17, 2014 8:20 PM
To: Marvin Hunkin; The Jaws for Windows support list.
Subject: Re: media players

Personally I really like VLC Media Player, and I like it even more since I discovered a list of shortcut keys. I have switched almost exclusively to it. The download page is at http://www.videolan.org/vlc and there's a list of keyboard shortcuts at https://wiki.videolan.org/Hotkeys_table/

Brad Martin
brad@...
http://www.facebook.com/ucoupons

On 11/17/2014 5:48 AM, Marvin Hunkin via Jfw wrote:
Hi.

Well.

Going to totally uinstall itunes.

Not customsizable enough, and the keyboard short cuts are klunky.

So.

Going to use windows media player for the time being, until maybe
there is a more stable version of winamp, or if vlc media player or
some other media player is more accessible with jaws.

Marvin.



-------------- next part -------------- An HTML attachment was
scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/
20141117/7ac5dcaf/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
--
Brad Martin
brad@... <mailto:brad@...> My Facebook page where I post online shopping coupons and deals:
facebook.com/ucoupons <http://www.facebook.com/ucoupons>
My SmarterBucks signup link <http://bit.ly/1w5FCPu>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20141117/894b78cf/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: media players

Lisle, Ted (CHFS DMS)
 

Both players you name are quite accessible.

Ted

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Marvin Hunkin via Jfw
Sent: Monday, November 17, 2014 6:49 AM
To: jfw@...
Subject: media players

Hi.

Well.

Going to totally uinstall itunes.

Not customsizable enough, and the keyboard short cuts are klunky.

So.

Going to use windows media player for the time being, until maybe there is a more stable version of winamp, or if vlc media player or some other media player is more accessible with jaws.

Marvin.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20141117/7ac5dcaf/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


iCloud and Jaws

Tom Macha <toml614@...>
 

Hello I have an iPad and just signed up for iCloud does Jaws work with iCloud from a windows PC prospective? Thankss, tom


Re: antivirus program

Charles Coe
 

Hi,

I use Eset nod 32 and it works good. However it cost around $30.00. There
are free anti-virus such as AVG and Mcafee.

Charles

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Kristoffer
Gustafsson via Jfw
Sent: Tuesday, November 18, 2014 3:43 AM
To: jfw@...
Subject: antivirus program

Hi
I've just bought a new computer, and need a good anti virus program.
What programs are good?
/Kristoffer

--
Kristoffer Gustafsson
Salängsgatan 7a
tel:033-12 60 93
mobil: 0730-500934

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Lenovo or MS surface pro for workplace

Londa Peterson
 

I have a Yoga 2 11 and absolutely love it! It's almost all good. The only
bad is that you will need sighted assistance to change the function keys
back to their regular functions. Once that's done, though, it's a wonderful
machine. I've used it for personal and work tasks quite successfully.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Jodie Hoger
via Jfw
Sent: Monday, November 17, 2014 5:47 PM
To: jaws
Subject: Lenovo or MS surface pro for workplace

Hi List, Would love some feedback from those of you using either the Lenovo
Yoga or MS Surface Pro with latest JAWS for work. Would like the good, the
bad and the ugly - smile.
Thanks in advance,
Jo

Sent from my iPhone
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


JAWS and Outlook 2010, How To Change Folder View?

Tim Ford
 

In most cases, I want to have the list of emails in a given Outlook folder display by who the note is addressed to, the recipient. Currently, most of my folders show who sent the email, which of course is me. How do I change that view to show instead who I sent the note to?

Tim Ford
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20141118/f6b43bf9/attachment.html>


Re: New install version 16

Lisle, Ted (CHFS DMS)
 

I have a Pro license, so that's how mine reads.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of MINH-TUYET SNOW JONES via Jfw
Sent: Saturday, November 15, 2014 11:55 PM
To: Morey Worthington; The Jaws for Windows support list.
Subject: Re: New install version 16

I thought I read from an announcement from FS recently that they have decided to combine Jaws Pro & Home so that it would be easier on its users. They said they would begin with Jaws 16. It's probably the reason why.

On 11/15/14, Morey Worthington via Jfw <jfw@...> wrote:
Hi all,
I have just installed Jaws 16 from the CD I received today. Now the
problem...It says it is the PRO version, and does not say anything
about the

Home Version.
Has anyone else have this issue?
Thanks,
Morey Worthington


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
MINH-TUYET SNOW JONES (Mrs)
3810 Kansas Street,
Bellingham, WA 98229-6030 USA
Tel: +1 360 566 2215
Mobile: +1 360 223 9432
Email: tranthiminhtuyet@...

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: cut and copy

Feliciano G
 

The file may not be selected. Press the space bar on the file before copying.

Like my Facebook page: https://m.facebook.com/profile.php?id=690649294341327 Follow me on Twitter: Www.twitter.com/theblindman12v Sent from the Super-iPhone

Regards, Feliciano

Sent from the Super-iPhone

On Nov 18, 2014, at 6:37 AM, ryan via Jfw <jfw@...> wrote:

Hello I am using jaws 15 on windows 8 when I control c or x to move a file from one place to another it is not working it does not copy or cut the file any help?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20141118/d460476a/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: JAWS 16 fails to start after installation

Hozefa Tambawala
 

Ok, I have notified Freedom Scientific tech support about this issue.
Now waiting for their response.

On 11/18/14, Melissa Stott via Jfw <jfw@...> wrote:
Jaws16 installed fine for me from the CD also, and is working great so far.

-----Original Message-----
From: Stan Holdeman via Jfw
Sent: Tuesday, November 18, 2014 4:57 AM
To: Hozefa Tambawala ; The Jaws for Windows support list.
Subject: Re: JAWS 16 fails to start after installation

For me Jaws 16 also failed to work after installing from the download. It
worked fine, though, after installing from the CD.

Stan


-----Original Message-----
From: Hozefa Tambawala via Jfw
Sent: Monday, November 17, 2014 1:47 AM
To: Feliciano Godoy
Cc: The Jaws for Windows support list.
Subject: Re: JAWS 16 fails to start after installation

@ Eyeball,

As JAWS 16 is not working, I installed JAWS 15.

@ Feliciano,

Repairing JAWS didn't worked.

On 11/17/14, Feliciano Godoy <theblindman12v@...> wrote:
Repair it by running the exe or inserting the disc.
Like my Facebook page:
https://m.facebook.com/profile.php?id=690649294341327
Follow me on Twitter: Www.twitter.com/theblindman12v Sent from the
Super-iPhone

Regards, Feliciano

Sent from the Super-iPhone

On Nov 16, 2014, at 6:07 AM, Hozefa Tambawala via Jfw
<jfw@...> wrote:

Dear friends,

I am not getting JAWS output after installing JAWS 16. However,
during the JAWS setup, the JAWS is speaking without any issues. I have
restarted my system and tried to start JAWS manually but no success.

On the same machine, JAWS 15 is running perfectly.

I am running Windows 8.1

Can anybody assist me in this regard or provide me the contact
details of Freedom Scientific tech support?

--
"Life is like a piano.
White keys are happy moments
& Black keys are sad moments.
But remember both keys are played together to give sweet music."

"Focus on your abilities, not your disability."

Follow me on Facebook:
https://www.facebook.com/starhoze

Skype ID:
star.hoze

Warm Regards,

Hozefa...

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
"Life is like a piano.
White keys are happy moments
& Black keys are sad moments.
But remember both keys are played together to give sweet music."

"Focus on your abilities, not your disability."

Follow me on Facebook:
https://www.facebook.com/starhoze

Skype ID:
star.hoze

Warm Regards,

Hozefa...

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
--
"Life is like a piano.
White keys are happy moments
& Black keys are sad moments.
But remember both keys are played together to give sweet music."

"Focus on your abilities, not your disability."

Follow me on Facebook:
https://www.facebook.com/starhoze

Skype ID:
star.hoze

Warm Regards,

Hozefa...


cut and copy

ryan <r10mcmanomy@...>
 

Hello I am using jaws 15 on windows 8 when I control c or x to move a file from one place to another it is not working it does not copy or cut the file any help?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20141118/d460476a/attachment.html>


Re: Still having problems with scanned image PDF files

Lisle, Ted (CHFS DMS)
 

What's more, the engine used in 16 is a version of OmniPage. It's either on the disk, or available as a separate download along with 16.

Ted

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Adrian Spratt via Jfw
Sent: Friday, November 14, 2014 10:17 PM
To: The Jaws for Windows support list.
Subject: RE: Still having problems with scanned image PDF files

Or better still, Nuance's OmniPage, which cost $80 the last time I bought it. As a commercial product, it doesn't have a limited market and so can spread out the cost among many more customers. It's accessible for all my online PDF needs.

That said, JAWS 16 has clearly made advances in handling image-only PDF files. I'm waiting for the first fixes release, but the feature is explained in a recent FSCast at
http://www.freedomscientific.com/About/FSCast/FullListing#Episode99

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Taylor via Jfw
Sent: Friday, November 14, 2014 9:08 PM
To: Tom Behler; The Jaws for Windows support list.
Subject: Re: Still having problems with scanned image PDF files

May seem expensive, but have you considered Kurzweil? It is a very good program, and I use it a lot or have you considered open book? Two very good programs they might be expensive, but consider them because it will last a long time.

Sent from my iPhone

On Nov 14, 2014, at 8:19 PM, Tom Behler via Jfw <jfw@...> wrote:

Hi, all.



A few weeks ago, I raised the issue of how best to use the OCR
capability in the most recent versions of Jaws to read scanned image PDF files.



In response to my quiry, a list member gave me the following instructions:



Tom, using your current version of JAWS, your best bet is to perform
an OCR of your screen, when you have an unreadable PDF in focus. To
do this, you will need to press JAWS Key plus the space bar to activate the layer menu.

JAWS should make an audible sound indicating that you've done this
successfully. Then press the letter O. JAWS should announce OCR.
Then press S for screen. You can also press W for window, if the
screen option does not give you what you want."



I received another scanned image file today, and tried both sets of
instructions, but had no luck in reading the text in the file. Jaws
did come up, but it spoke in the Jaws cursor voice, rather than the PC
cursor voice, and didn't appear to be reading anything meaningful from
the document in focus.



Am I missing something here?



I'd be happy to e-mail the file to anyone who might want to take a
look at it.



P.S. I'm using Jaws 14 on a windows 7 machine here. Perhaps this
would be a good reason to upgrade to Jaws 16.



Dr. Tom Behler from Michigan







-------------- next part -------------- An HTML attachment was
scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/
20141114/d2d15d02/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Still having problems with scanned image PDF files

Lisle, Ted (CHFS DMS)
 

There's a new key in 16. Do the JAWS-Space-O, then hit D for document. This will put you in a Results field, which will contain the scanned text. However, this is a temporary field, so, if you want to take your time or save your results, copy and paste them into the appropriate program. It may take a minute or two for the entire document to appear, but JAWS will give you progress reports. This is important if you want to export the scanned document, but JAWS will allow you to start reading almost immediately.

Ted

Ted

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Tom Behler via Jfw
Sent: Friday, November 14, 2014 8:19 PM
To: 'The Jaws for Windows support list.'
Subject: Still having problems with scanned image PDF files

Hi, all.



A few weeks ago, I raised the issue of how best to use the OCR capability in the most recent versions of Jaws to read scanned image PDF files.



In response to my quiry, a list member gave me the following instructions:



Tom, using your current version of JAWS, your best bet is to perform an OCR of your screen, when you have an unreadable PDF in focus. To do this, you will need to press JAWS Key plus the space bar to activate the layer menu.

JAWS should make an audible sound indicating that you've done this successfully. Then press the letter O. JAWS should announce OCR. Then press S for screen. You can also press W for window, if the screen option does not give you what you want."



I received another scanned image file today, and tried both sets of instructions, but had no luck in reading the text in the file. Jaws did come up, but it spoke in the Jaws cursor voice, rather than the PC cursor voice, and didn't appear to be reading anything meaningful from the document in focus.



Am I missing something here?



I'd be happy to e-mail the file to anyone who might want to take a look at it.



P.S. I'm using Jaws 14 on a windows 7 machine here. Perhaps this would be a good reason to upgrade to Jaws 16.



Dr. Tom Behler from Michigan







-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20141114/d2d15d02/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Creating headers in Word 2010 with JAWS

Lisle, Ted (CHFS DMS)
 

Dave, I think the old outline increase-decrease command was a tab.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Mike B. via Jfw
Sent: Friday, November 14, 2014 4:51 PM
To: Adrian Spratt; The Jaws for Windows support list.
Subject: Re: Creating headers in Word 2010 with JAWS

Hi Adrian,

See if these notes I've saved help you any:

From: Barbara Anne Bolin
A quick way to set text with a heading is:
CTL + ALT + 1 = heading level 1
CTL + ALT + 2 = heading level 2
CTL + ALT + 3 = heading level 3
Pressing JAWS Key + F will verify the heading was set.
You do not have to highlight the data before using the above key strokes.
Everything on that line will be given the requested heading level.

You can increase a heading level with shift + ALT + right arrow.
You can decrease a heading level with shift + ALT + left arrow.

These are WORD keys, not JAWS keys.
They have been extremely useful to me.
Always,
Barbara Anne
BarbaraAnne1@...

From: Ed Marquette
Barbara Ann is absolutely correct. The template in use, however, needs to have the heading levels set as desired. They really are styles. So, if the default headings aren't what you want, modify the style. Once you have opened the modify style sheet, hit shift tab to "Format."
Then, hit ENTER. The dialog box gives you choices as to font, numbering, paragraph alignment, and so on.
If you ever need Heading 4 style, be aware that control plus alt plus 4 won't work. Instead, press control plus shift plus s for "styles." Then hit "h" for headings. Arrow down past headings 1, 2, and 3 to heading 4 and press enter. Of course, the same principle applies for heading 5 and so on.

After you have used a style from the strategy identified above, the style pane will be open. You may want to get rid of the styles pane. Just hit F-6 until it comes up, press shift space, and arrow to "close."
One more thing.
Barbara said the style will apply to the line. Actually, it will apply to the whole paragraph. So, if you don't want to insert a carriage return (or a style separator) between the heading style and the rest of the paragraph (I do this in contracts), Highlight the part of the paragraph you want in the heading style. Then apply the style to that part of the paragraph.
Ed

From: Nicole Massey
Those heading styles should be contained in your normal.dot as well, so making a copy of this and just dropping it in if something goes wonky should also work.
Nicole

From: Dave "Farfar" Carlson
Barbara Anne,
Very nice. It's always good to have shortcuts presented as reminders. I wonder if the same increase and decrease commands will change outline levels, as well...
Dave Carlson
San Francisco Bay Area semi-retired sales engineer, Farfar, musician, and woodworker.
dgcarlson@...

From: Dave "Farfar" Carlson
Barbara Anne,
Excellent! I just tried it out on an outline I was struggling with several weeks ago. If I had only known about these increase/decrease commands, it would have saved me literally an hour's worth of headache.
Dave Carlson
San Francisco Bay Area semi-retired sales engineer, Farfar, musician, and woodworker.
dgcarlson@...

Take Care.
Mike
This email was sent from my iBarstool.

----- Original Message -----
From: Adrian Spratt via Jfw
To: The Jaws for Windows support list.
Sent: Friday, November 14, 2014 1:30 PM
Subject: Creating headers in Word 2010 with JAWS


I want to create a header that will appear on every page in a long
document. This header will consist of my name, the work's title and a
running page number. I know to get to the start of this dialog in Word 2010
by pressing alt-n for insert, h for header, then e for edit. However, at
that point I can't move focus at all. I ended up having my sighted assistant
do it with the mouse.

I've read the passage in CathyAnne Murtha's Word 2010 textbook, and she
writes as if this process is doable with JAWS. But her instructions take me
no further than I got myself.

Has anyone succeeded in creating such a header in word 2010 with JAWS? If
so, please give me some pointers. I will need to create headers for other
documents in the near future.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20141114/05c13307/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20141114/55cc42bf/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


antivirus program

Kristoffer Gustafsson
 

Hi
I've just bought a new computer, and need a good anti virus program.
What programs are good?
/Kristoffer

--
Kristoffer Gustafsson
Salängsgatan 7a
tel:033-12 60 93
mobil: 0730-500934


Re: JAWS 16 fails to start after installation

Melissa Stott <mstott69@...>
 

Jaws16 installed fine for me from the CD also, and is working great so far.

-----Original Message-----
From: Stan Holdeman via Jfw Sent: Tuesday, November 18, 2014 4:57 AM To: Hozefa Tambawala ; The Jaws for Windows support list. Subject: Re: JAWS 16 fails to start after installation

For me Jaws 16 also failed to work after installing from the download. It worked fine, though, after installing from the CD.

Stan


-----Original Message-----
From: Hozefa Tambawala via Jfw
Sent: Monday, November 17, 2014 1:47 AM
To: Feliciano Godoy
Cc: The Jaws for Windows support list.
Subject: Re: JAWS 16 fails to start after installation

@ Eyeball,

As JAWS 16 is not working, I installed JAWS 15.

@ Feliciano,

Repairing JAWS didn't worked.

On 11/17/14, Feliciano Godoy <theblindman12v@...> wrote:
Repair it by running the exe or inserting the disc.
Like my Facebook page: https://m.facebook.com/profile.php?id=690649294341327
Follow me on Twitter: Www.twitter.com/theblindman12v Sent from the
Super-iPhone

Regards, Feliciano

Sent from the Super-iPhone

On Nov 16, 2014, at 6:07 AM, Hozefa Tambawala via Jfw
<jfw@...> wrote:

Dear friends,

I am not getting JAWS output after installing JAWS 16. However,
during the JAWS setup, the JAWS is speaking without any issues. I have
restarted my system and tried to start JAWS manually but no success.

On the same machine, JAWS 15 is running perfectly.

I am running Windows 8.1

Can anybody assist me in this regard or provide me the contact
details of Freedom Scientific tech support?

--
"Life is like a piano.
White keys are happy moments
& Black keys are sad moments.
But remember both keys are played together to give sweet music."

"Focus on your abilities, not your disability."

Follow me on Facebook:
https://www.facebook.com/starhoze

Skype ID:
star.hoze

Warm Regards,

Hozefa...

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
"Life is like a piano.
White keys are happy moments
& Black keys are sad moments.
But remember both keys are played together to give sweet music."

"Focus on your abilities, not your disability."

Follow me on Facebook:
https://www.facebook.com/starhoze

Skype ID:
star.hoze

Warm Regards,

Hozefa...

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: JAWS 16 fails to start after installation

Stan Holdeman
 

For me Jaws 16 also failed to work after installing from the download. It worked fine, though, after installing from the CD.

Stan

-----Original Message-----
From: Hozefa Tambawala via Jfw
Sent: Monday, November 17, 2014 1:47 AM
To: Feliciano Godoy
Cc: The Jaws for Windows support list.
Subject: Re: JAWS 16 fails to start after installation

@ Eyeball,

As JAWS 16 is not working, I installed JAWS 15.

@ Feliciano,

Repairing JAWS didn't worked.

On 11/17/14, Feliciano Godoy <theblindman12v@...> wrote:
Repair it by running the exe or inserting the disc.
Like my Facebook page: https://m.facebook.com/profile.php?id=690649294341327
Follow me on Twitter: Www.twitter.com/theblindman12v Sent from the
Super-iPhone

Regards, Feliciano

Sent from the Super-iPhone

On Nov 16, 2014, at 6:07 AM, Hozefa Tambawala via Jfw
<jfw@...> wrote:

Dear friends,

I am not getting JAWS output after installing JAWS 16. However,
during the JAWS setup, the JAWS is speaking without any issues. I have
restarted my system and tried to start JAWS manually but no success.

On the same machine, JAWS 15 is running perfectly.

I am running Windows 8.1

Can anybody assist me in this regard or provide me the contact
details of Freedom Scientific tech support?

--
"Life is like a piano.
White keys are happy moments
& Black keys are sad moments.
But remember both keys are played together to give sweet music."

"Focus on your abilities, not your disability."

Follow me on Facebook:
https://www.facebook.com/starhoze

Skype ID:
star.hoze

Warm Regards,

Hozefa...

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
"Life is like a piano.
White keys are happy moments
& Black keys are sad moments.
But remember both keys are played together to give sweet music."

"Focus on your abilities, not your disability."

Follow me on Facebook:
https://www.facebook.com/starhoze

Skype ID:
star.hoze

Warm Regards,

Hozefa...

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Lenovo or MS surface pro for workplace

Ed Marquette <marquette.ed@...>
 

I have the Yoga and love it.
I'm also on our firm's technology committee. At our last meeting,
someone mentioned a significant problem with the Surface and its
ability to integrate with our firm's over-exuberant security
policies. The report, however, also indicated that MS was working
on a solution. I must confess that, not being interested in the
Surface, I wasn't paying attention.
I recall it having something to do with the Surface failing
accurately to report when it was and when it was not connected.
In other words, it would report it was disconnected when it
actually was connected, and even worse, fail to report that it was
disconnected when it was.
Again, Microsoft said it was aware of and was fixing the problem.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of
Jodie Hoger via Jfw
Sent: Monday, November 17, 2014 4:47 PM
To: jaws
Subject: Lenovo or MS surface pro for workplace

Hi List, Would love some feedback from those of you using either
the Lenovo Yoga or MS Surface Pro with latest JAWS for work.
Would like the good, the bad and the ugly - smile.
Thanks in advance,
Jo

Sent from my iPhone
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

75941 - 75960 of 102607