Date   

Re: Jaws16 Can't figure it out: how to create a separate voice profilewith Eloquence?

Cristóbal
 

I found that Jaws was speaking the words in secondary languages I had
previously configured in JFW 15 and copied over to JFW 16 tterribly slow.
The fix was to go into the profile (in my case Eloquence) and tab down to
the combo boxof languages leaving Eloquence as the selected synth and then
tabbingdown to the speech rate after having chosen a particular language
(not setting it as default) though. I sped up the rate of speech and tabbed
down to the save as button and selected the Eloquence profile. Keeping it as
my default and that sorted it out.

One major annoying thing I am experiencing though is words I have selected
to be spoken in Spanish via Dictionary Manager and were done so with the
Latin American Spanish (Spanish Mexico) are now spoken with the Castilian
version (Spanish Spain). There doesn’t' seem to be a way to fix this or even
deselect Spanish Spain as a synthesizer option as in older versions of Jaws.
My name is one Example alogn with other speratic words. If someone knows how
to fix this, it would be greatly appreciated.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Dennis Brown
via Jfw
Sent: Wednesday, November 05, 2014 11:14 AM
To: Gerardo Corripio; The Jaws for Windows support list.
Subject: Re: Jaws16 Can't figure it out: how to create a separate voice
profilewith Eloquence?

Gerardo,
Read these instructions all the way through before trying them.

1. Insert+J to open Jaws dialog.
2. Select Options, then Voices, then Adjust Voices...
3. If Eloquence isn't selected, do so, then tab through the settings,
making the appropriate voice rate adjustments.
4. Tab to Save As... and give it a name like "Slower Eloquence."
Now, you have just created a new voice profile.
To assign it to the application you want, hit Insert+Control+S while in the
desired application, and tab to the second list of profiles, selecting
"Slower Eloquence" as the desired profile for that application.

Note:
Sometimes, when you create another profile, Jaws starts using the new
settings automatically.
To reset Jaws to the original profile you had, (in your case, the Eloquence
with the faster voice rate,) go into Insert+Control+S and set Eloquence as
the default in the first list.
hth!
Thanks,
Dennis Brown

----- Original Message -----
From: "Gerardo Corripio via Jfw" <jfw@lists.the-jdh.com>
To: "Email Jaws for Windows support List" <jfw@lists.the-jdh.com>
Sent: Wednesday, November 05, 2014 12:12 PM
Subject: Jaws16 Can't figure it out: how to create a separate voice
profilewith Eloquence?


HI guys
OK the deal is this: Upgraded last night to Jaws16; like the changes of the
language via Windows+Control+l, but now can't figure out how to create a
separate profile so when I record podcasts, Eloquence slows down be in
English or Spanish! Any tips?

--
Enviado desde mi lap
Gerardo J Corripio Flores Psicólogo, Terapéuta Reiki Saludos desde Tampico,
Tamaulipas México RompiendoBarreras espacio de psicología/Superación
Personal Sábados 10PM México http://radiogeneral.com ¡los esperamos!


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Tagging on Facebook with Jaws

Kimber Gardner
 

On 11/5/14, Brad Martin via Jfw <jfw@lists.the-jdh.com> wrote:
I could tag in IE10 but not IE11, and I could always tag in
Firefox.
That actually explains a lot since I am using IE11 at home and have
never been able to tag even on the fully-featured FB site. I have IE9
at my office and tagging does seem to be working there. Tonight I'll
give it a try with Firefox at home.

Thank you so much for all the help!

Kim

Hope that helps,
Brad
brad@formyfriends.org
www.facebook.com/ucoupons

I have not gotten that to work on the mobile Facebook site, but if you
click on more options, you should be able to see an option that says to
tag friends.

Aleeha Dudley and seeing eye dog Dallas
Vice President, Ohio Association of blind students
Blindcowgirl1993@gmail.com
"The wind of Heaven is that which blows between a horse's ears." Arabian
proverb

Sent from my iPhone

On Nov 5, 2014, at 9:59 AM, Luis Difut via Jfw <jfw@lists.the-jdh.com>
wrote:

It only works on the regular FB site. The mobile site don't let you do
that.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Kimber
Gardner
via Jfw
Sent: Wednesday, November 05, 2014 9:35 AM
To: The Jaws for Windows support list.
Subject: Tagging on Facebook with Jaws

Hi All,

I've read that I should be able to tag friends in Facebook posts by
typing
the @ sign followed by the name of the friend. Supposedly when I start
typing the name, a list of choices should appear from which I ought to
be
able to select the friend I want to tag. This doesn't happen for me with
either firefox or internet explorer.

Am I missing something? Or is tagging not possible when using a screen
reader?

Thanks,
Kim

--
Kimberly

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Kimberly


Re: Jaws16 Can't figure it out: how to create a separate voice profilewith Eloquence?

Dennis Brown
 

Gerardo,
Read these instructions all the way through before trying them.

1. Insert+J to open Jaws dialog.
2. Select Options, then Voices, then Adjust Voices...
3. If Eloquence isn't selected, do so, then tab through the settings, making the appropriate voice rate adjustments.
4. Tab to Save As... and give it a name like "Slower Eloquence."
Now, you have just created a new voice profile.
To assign it to the application you want, hit Insert+Control+S while in the desired application, and tab to the second list of profiles, selecting "Slower Eloquence" as the desired profile for that application.

Note:
Sometimes, when you create another profile, Jaws starts using the new settings automatically.
To reset Jaws to the original profile you had, (in your case, the Eloquence with the faster voice rate,) go into Insert+Control+S and set Eloquence as the default in the first list.
hth!
Thanks,
Dennis Brown

----- Original Message -----
From: "Gerardo Corripio via Jfw" <jfw@lists.the-jdh.com>
To: "Email Jaws for Windows support List" <jfw@lists.the-jdh.com>
Sent: Wednesday, November 05, 2014 12:12 PM
Subject: Jaws16 Can't figure it out: how to create a separate voice profilewith Eloquence?


HI guys
OK the deal is this: Upgraded last night to Jaws16; like the changes of
the language via Windows+Control+l, but now can't figure out how to
create a separate profile so when I record podcasts, Eloquence slows
down be in English or Spanish! Any tips?

--
Enviado desde mi lap
Gerardo J Corripio Flores Psicólogo, Terapéuta Reiki
Saludos desde Tampico, Tamaulipas México
RompiendoBarreras espacio de psicología/Superación Personal Sábados 10PM México http://radiogeneral.com ¡los esperamos!


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Jaws16 Can't figure it out: how to create a separate voice profilewith Eloquence?

Kevin Hourigan <kevinthourigan@...>
 

Hello Gerardo,,
See Voice Profiles in Jaws training.
If you are not in the JAWS window already press ALT+TAB to move there. MAGic users can press CAPS LOCK+U to switch to the MAGic user interface.
I'm going to press ALT+O to activate the Options menu, followed by pressing DOWN ARROW to move to Voices submenu. Then press RIGHT ARROW to open this submenu. MAGic users press ALT+S then G.
Press ENTER to open the Voice Adjustment dialog box for JAWS or MAGic. The focus is in the Profile name combo box. The Eloquence selection should be highlighted in this combo box, unless you have switched to a different voice profile.
Press TAB to move past the Delete button, and find the Synthesizer Language combo box. The Language combo box lets you choose a language for the currently selected synthesizer. The availability of languages varies according to the choice of the synthesizer.
Press L until you move to Latin American Spanish in the list. Notice that the synthesizer immediately switches to this language, so you hear what it sounds like.
Next, you need to save these settings as a new profile. Press ALT+S to activate the Save As button in the Voice Adjustment dialog box. The Save Voice Profile dialog box opens with focus in the edit field. Now you still hear it speaking Latin American Spanish, so you have to be careful here.
Type in Spanish Eloquence and press ENTER to close this. A dialog box appears that asks if you want to make Spanish Eloquence the default profile. In this case, I'm going to choose the "No" button. I'll press TAB to move to the No button and press SPACEBAR. Focus returns to the Voice Adjustment combo box. Focus is in the Profile Name edit box.
Next, I'll press ENTER to close the Voice Adjustment dialog box. Focus returns to the JAWS window.
Press INSERT+CTRL+S to open the Select a Voice Profile dialog box. It now contains two combo boxes and an OK and Cancel button. The two combo boxes are:

Default
Current Application Name
The Default combo box can be thought of as the "global" setting. Whatever is chosen in this combo box becomes the voice profile for *all* programs, with the exception of the following combo box.

The second combo box shows the name of the current application that is in the foreground when the Select a Voice Profile dialog box opens. If you open this from Notepad, the second combo box says "Notepad." If you open this from Internet Explorer, the second combo box says "Internet Explorer." This second combo box gives you an opportunity to switch to a specific voice profile whenever that application opens or focus switches to it. The default setting for the second combo box should be Use Default unless you have changed it to another voice profile.
Cheers Kevin.

-----Original Message-----
From: Gerardo Corripio via Jfw
Sent: Wednesday, November 05, 2014 9:12 AM
To: Email Jaws for Windows support List
Subject: Jaws16 Can't figure it out: how to create a separate voice profilewith Eloquence?

HI guys
OK the deal is this: Upgraded last night to Jaws16; like the changes of
the language via Windows+Control+l, but now can't figure out how to
create a separate profile so when I record podcasts, Eloquence slows
down be in English or Spanish! Any tips?

--
Enviado desde mi lap
Gerardo J Corripio Flores Psicólogo, Terapéuta Reiki
Saludos desde Tampico, Tamaulipas México
RompiendoBarreras espacio de psicología/Superación Personal Sábados 10PM México http://radiogeneral.com ¡los esperamos!


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Jaws16 Can't figure it out: how to create a separate voice profile with Eloquence?

Gerardo Corripio <gera1027@...>
 

HI guys
OK the deal is this: Upgraded last night to Jaws16; like the changes of the language via Windows+Control+l, but now can't figure out how to create a separate profile so when I record podcasts, Eloquence slows down be in English or Spanish! Any tips?

--
Enviado desde mi lap
Gerardo J Corripio Flores Psicólogo, Terapéuta Reiki
Saludos desde Tampico, Tamaulipas México
RompiendoBarreras espacio de psicología/Superación Personal Sábados 10PM México http://radiogeneral.com ¡los esperamos!


Re: Tagging on Facebook with Jaws

Brad Martin
 

This is correct. You can tab before you post, and it will say, "With
so-and-so." But in mobile, you can't say Having dinner with @Kimber and
get it to populate. This is because the Mobile version of the site does
not include the technology to autopopulate the field; it probably uses
java script, which is not part of the mobile site. When using the regular
facebook site, I could tag in IE10 but not IE11, and I could always tag in
Firefox.

Hope that helps,
Brad
brad@formyfriends.org
www.facebook.com/ucoupons

I have not gotten that to work on the mobile Facebook site, but if you
click on more options, you should be able to see an option that says to
tag friends.

Aleeha Dudley and seeing eye dog Dallas
Vice President, Ohio Association of blind students
Blindcowgirl1993@gmail.com
"The wind of Heaven is that which blows between a horse's ears." Arabian
proverb

Sent from my iPhone

On Nov 5, 2014, at 9:59 AM, Luis Difut via Jfw <jfw@lists.the-jdh.com>
wrote:

It only works on the regular FB site. The mobile site don't let you do
that.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Kimber
Gardner
via Jfw
Sent: Wednesday, November 05, 2014 9:35 AM
To: The Jaws for Windows support list.
Subject: Tagging on Facebook with Jaws

Hi All,

I've read that I should be able to tag friends in Facebook posts by
typing
the @ sign followed by the name of the friend. Supposedly when I start
typing the name, a list of choices should appear from which I ought to
be
able to select the friend I want to tag. This doesn't happen for me with
either firefox or internet explorer.

Am I missing something? Or is tagging not possible when using a screen
reader?

Thanks,
Kim

--
Kimberly

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Tagging on Facebook with Jaws

Aleeha Dudley
 

I have not gotten that to work on the mobile Facebook site, but if you click on more options, you should be able to see an option that says to tag friends.

Aleeha Dudley and seeing eye dog Dallas
Vice President, Ohio Association of blind students
Blindcowgirl1993@gmail.com
"The wind of Heaven is that which blows between a horse's ears." Arabian proverb

Sent from my iPhone

On Nov 5, 2014, at 9:59 AM, Luis Difut via Jfw <jfw@lists.the-jdh.com> wrote:

It only works on the regular FB site. The mobile site don't let you do that.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Kimber Gardner
via Jfw
Sent: Wednesday, November 05, 2014 9:35 AM
To: The Jaws for Windows support list.
Subject: Tagging on Facebook with Jaws

Hi All,

I've read that I should be able to tag friends in Facebook posts by typing
the @ sign followed by the name of the friend. Supposedly when I start
typing the name, a list of choices should appear from which I ought to be
able to select the friend I want to tag. This doesn't happen for me with
either firefox or internet explorer.

Am I missing something? Or is tagging not possible when using a screen
reader?

Thanks,
Kim

--
Kimberly

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Tagging on Facebook with Jaws

Luis Difut
 

It only works on the regular FB site. The mobile site don't let you do that.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Kimber Gardner
via Jfw
Sent: Wednesday, November 05, 2014 9:35 AM
To: The Jaws for Windows support list.
Subject: Tagging on Facebook with Jaws

Hi All,

I've read that I should be able to tag friends in Facebook posts by typing
the @ sign followed by the name of the friend. Supposedly when I start
typing the name, a list of choices should appear from which I ought to be
able to select the friend I want to tag. This doesn't happen for me with
either firefox or internet explorer.

Am I missing something? Or is tagging not possible when using a screen
reader?

Thanks,
Kim

--
Kimberly

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Tagging on Facebook with Jaws

Feliciano G
 

This works while using IE10 on the official facebook site.

Like my Facebook page: https://m.facebook.com/profile.php?id=690649294341327 Follow me on Twitter: Www.twitter.com/theblindman12v Sent from the Super-iPhone

Regards, Feliciano

Sent from the Super-iPhone

On Nov 5, 2014, at 6:34 AM, Kimber Gardner via Jfw <jfw@lists.the-jdh.com> wrote:

Hi All,

I've read that I should be able to tag friends in Facebook posts by
typing the @ sign followed by the name of the friend. Supposedly when
I start typing the name, a list of choices should appear from which I
ought to be able to select the friend I want to tag. This doesn't
happen for me with either firefox or internet explorer.

Am I missing something? Or is tagging not possible when using a screen reader?

Thanks,
Kim

--
Kimberly

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Tagging on Facebook with Jaws

Kimber Gardner
 

Hi All,

I've read that I should be able to tag friends in Facebook posts by
typing the @ sign followed by the name of the friend. Supposedly when
I start typing the name, a list of choices should appear from which I
ought to be able to select the friend I want to tag. This doesn't
happen for me with either firefox or internet explorer.

Am I missing something? Or is tagging not possible when using a screen reader?

Thanks,
Kim

--
Kimberly


Re: reading attachment titles in outlook

Jeff Christiansen
 

Just use
Alt plus tab, move focus away and then
Alt plus tab again.
I have had trouble getting the popUp menu to work after touching the
application key. This method works for me and hoefully you as well.


Jeff.();

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Tim Ford via
Jfw
Sent: Tuesday, November 04, 2014 4:10 PM
To: Greg Nickel; The Jaws for Windows support list.
Subject: Re: reading attachment titles in outlook

I have the exact same problem, I believe whenever there are a significant
number or size of attachments. I have not found a solution, other than to
do the save all attachments step and see what is there. Hopefully someone
has a solution. My other work-around at present is to access the problem
email through my available web mail client, and the attachment names all
show up there an are easily accessed

Tim Ford

-----Original Message-----
From: Greg Nickel via Jfw
Sent: Tuesday, November 04, 2014 11:53 AM
To: 'david' ; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

I've tried this before thinking the same without success. I tried it here
once again both by maximizing outlook first and the open message 2nd. Still
loosing focus when arrowing right after the first attachment is read.
-----Original Message-----
From: david [mailto:davidwhitehead1957@cogeco.ca]
Sent: Tuesday, November 04, 2014 11:28 AM
To: 'Greg Nickel'; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

hello;

make sure the window is maximized when your looking for the attachment
names,

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Greg Nickel
via Jfw
Sent: Tuesday, November 4, 2014 2:23 PM
To: 'Cy Selfridge'; 'The Jaws for Windows support list.'; 'George B'
Subject: RE: reading attachment titles in outlook

This is the protocol I use: Shift+tab from body of email to attachment list
then arrow right. It only reads 1 of the attachments and then it looses
focus.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Cy Selfridge
via Jfw
Sent: Tuesday, November 04, 2014 11:14 AM
To: 'George B'; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

This is absolutely true with W7 64 bit, JAWS 14 and Office 2007.
Works like a charm.
Cy t

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of George B via
Jfw
Sent: Tuesday, November 04, 2014 11:47 AM
To: 'Greg Nickel'; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

From the body of the email,
Shift tab once and you are on the line with the attachements, Now just arrow
right and each attachement if titled will be red to you

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Greg Nickel
via Jfw
Sent: Tuesday, November 04, 2014 10:32
To: Jfw@lists.the-jdh.com
Subject: reading attachment titles in outlook

Hello all.

Can anyone tell me why/how JAWS does not read more than the first
attachment

in outlook when more than one attachment is present?

How do you get JAWS to read the titles of all attachments in an email

received in outlook?

I'm using JAWS 14 and Outlook 2010.



Thanks.

Greg





-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201411
04/e3044f01/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


ff:

M Tobia
 


Re: Selecting Malware Bytes results for deletion

Mike B. <mb69mach1@...>
 

Hi Tim,

These steps are for MWB 1.75:
1. Press the spacebar on the, show results button, to activate it.

2. Now route the Jaws cursor to the PC cursor using the keystroke, Insert /
Jaws Key + NumPad minus / Jaws cursor button, & you should be on the, Exit,
button.

3. Press the, PageUp key or, control + Home, to take the cursor to the top
of the Malware Bytes window.

4. Down arrow to the, malicious items found, it shall sound like graphic 256
graphic 702 PUP.Riskware blab la bla, now, perform a single left mouse
click
by
tapping NumPad (Slash). It will move the focus of the PC cursor to the
Maliscious items list.
5. Now press the, PC cursor key, to activate the PC cursor.

6. Press down arrow/up arrow keys to navigate with in the list and spacebar
to check/uncheck items. But, unfortunately, for some reason, jaws will not
echo,
the check/uncheck states. The items, visually speaking, all malicious
items found are uncheck by default, so, pressing spacebar once will
hopefully check
the item in focus. Check all
items you would like to remove and tab to the, remove selected items button,
& press the spacebar.
7. Now tab once to,finish, & press the spacebar. If you get a dialogue
stating the computer needs to be restarted to finish the deletion process,
go ahead
& reboot.


Take care.
Mike
This email was sent from my, iBarstool.

----- Original Message -----
From: Tim Ford via Jfw
To: The Jaws for Windows support list.
Sent: Tuesday, November 04, 2014 4:38 PM
Subject: Selecting Malware Bytes results for deletion


HI All,

I have apparently forgotten how to pick all the files that Malware Bytes
found, and had suggested for deletion. I could not figure out how to select
all, and the results txt file confirmed that no action had been taken on all
those files. What is the process for selecting all files?

Tim Ford
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20141104/f3ce32eb/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20141104/2faeabbc/attachment.html>


Selecting Malware Bytes results for deletion

Tim Ford
 

HI All,

I have apparently forgotten how to pick all the files that Malware Bytes found, and had suggested for deletion. I could not figure out how to select all, and the results txt file confirmed that no action had been taken on all those files. What is the process for selecting all files?

Tim Ford
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20141104/f3ce32eb/attachment.html>


Re: reading attachment titles in outlook

Greg Nickel
 

Thanks guys.

The problem with using the forward mechanism is that it doesn't allow you to
open individual attachments from the list, it only allows you to hear what
is there. However, it seems that if in the maximized view you can open the
email then shift tab into the attachments block and then it appears to be
accessible.


So, thanks guys...seems like we've got it.

Greg

-----Original Message-----
From: Andre Jarreau [mailto:andre.jarreau@earthlink.net]
Sent: Tuesday, November 04, 2014 3:21 PM
To: 'Greg Nickel'; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

Yes, try Control-F and then shift tab into the attachments. On my computer
it opens up the attachmentslist.

Andre

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Greg Nickel
via Jfw
Sent: Tuesday, November 04, 2014 1:23 PM
To: 'Cy Selfridge'; 'The Jaws for Windows support list.'; 'George B'
Subject: RE: reading attachment titles in outlook

This is the protocol I use: Shift+tab from body of email to attachment list
then arrow right. It only reads 1 of the attachments and then it looses
focus.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Cy Selfridge
via Jfw
Sent: Tuesday, November 04, 2014 11:14 AM
To: 'George B'; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

This is absolutely true with W7 64 bit, JAWS 14 and Office 2007.
Works like a charm.
Cy t

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of George B via
Jfw
Sent: Tuesday, November 04, 2014 11:47 AM
To: 'Greg Nickel'; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

From the body of the email,
Shift tab once and you are on the line with the attachements, Now just arrow
right and each attachement if titled will be red to you

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Greg Nickel
via Jfw
Sent: Tuesday, November 04, 2014 10:32
To: Jfw@lists.the-jdh.com
Subject: reading attachment titles in outlook

Hello all.

Can anyone tell me why/how JAWS does not read more than the first
attachment

in outlook when more than one attachment is present?

How do you get JAWS to read the titles of all attachments in an email

received in outlook?

I'm using JAWS 14 and Outlook 2010.



Thanks.

Greg





-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201411
04/e3044f01/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: reading attachment titles in outlook

Andre Jarreau <andre.jarreau@...>
 

From the body of the email hit Control-F and then shift tab to the
attachments list. When done escape out to close the forwarded email.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Tim Ford via
Jfw
Sent: Tuesday, November 04, 2014 5:10 PM
To: Greg Nickel; The Jaws for Windows support list.
Subject: Re: reading attachment titles in outlook

I have the exact same problem, I believe whenever there are a significant
number or size of attachments. I have not found a solution, other than to
do the save all attachments step and see what is there. Hopefully someone
has a solution. My other work-around at present is to access the problem
email through my available web mail client, and the attachment names all
show up there an are easily accessed

Tim Ford

-----Original Message-----
From: Greg Nickel via Jfw
Sent: Tuesday, November 04, 2014 11:53 AM
To: 'david' ; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

I've tried this before thinking the same without success. I tried it here
once again both by maximizing outlook first and the open message 2nd. Still
loosing focus when arrowing right after the first attachment is read.
-----Original Message-----
From: david [mailto:davidwhitehead1957@cogeco.ca]
Sent: Tuesday, November 04, 2014 11:28 AM
To: 'Greg Nickel'; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

hello;

make sure the window is maximized when your looking for the attachment
names,

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Greg Nickel
via Jfw
Sent: Tuesday, November 4, 2014 2:23 PM
To: 'Cy Selfridge'; 'The Jaws for Windows support list.'; 'George B'
Subject: RE: reading attachment titles in outlook

This is the protocol I use: Shift+tab from body of email to attachment list
then arrow right. It only reads 1 of the attachments and then it looses
focus.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Cy Selfridge
via Jfw
Sent: Tuesday, November 04, 2014 11:14 AM
To: 'George B'; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

This is absolutely true with W7 64 bit, JAWS 14 and Office 2007.
Works like a charm.
Cy t

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of George B via
Jfw
Sent: Tuesday, November 04, 2014 11:47 AM
To: 'Greg Nickel'; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

From the body of the email,
Shift tab once and you are on the line with the attachements, Now just arrow
right and each attachement if titled will be red to you

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Greg Nickel
via Jfw
Sent: Tuesday, November 04, 2014 10:32
To: Jfw@lists.the-jdh.com
Subject: reading attachment titles in outlook

Hello all.

Can anyone tell me why/how JAWS does not read more than the first
attachment

in outlook when more than one attachment is present?

How do you get JAWS to read the titles of all attachments in an email

received in outlook?

I'm using JAWS 14 and Outlook 2010.



Thanks.

Greg





-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201411
04/e3044f01/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: reading attachment titles in outlook

Andre Jarreau <andre.jarreau@...>
 

Yes, try Control-F and then shift tab into the attachments. On my computer
it opens up the attachmentslist.

Andre

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Greg Nickel
via Jfw
Sent: Tuesday, November 04, 2014 1:23 PM
To: 'Cy Selfridge'; 'The Jaws for Windows support list.'; 'George B'
Subject: RE: reading attachment titles in outlook

This is the protocol I use: Shift+tab from body of email to attachment list
then arrow right. It only reads 1 of the attachments and then it looses
focus.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Cy Selfridge
via Jfw
Sent: Tuesday, November 04, 2014 11:14 AM
To: 'George B'; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

This is absolutely true with W7 64 bit, JAWS 14 and Office 2007.
Works like a charm.
Cy t

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of George B via
Jfw
Sent: Tuesday, November 04, 2014 11:47 AM
To: 'Greg Nickel'; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

From the body of the email,
Shift tab once and you are on the line with the attachements, Now just arrow
right and each attachement if titled will be red to you

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Greg Nickel
via Jfw
Sent: Tuesday, November 04, 2014 10:32
To: Jfw@lists.the-jdh.com
Subject: reading attachment titles in outlook

Hello all.

Can anyone tell me why/how JAWS does not read more than the first
attachment

in outlook when more than one attachment is present?

How do you get JAWS to read the titles of all attachments in an email

received in outlook?

I'm using JAWS 14 and Outlook 2010.



Thanks.

Greg





-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201411
04/e3044f01/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: reading attachment titles in outlook

Andre Jarreau <andre.jarreau@...>
 

Something you can try is Control-F which is to forward the email. However I
have found that it opens up the attachments column and you can then read all
attachments. When done just escape out of the email cancelling the forward.
Hope this helps.
Andre

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of George B via
Jfw
Sent: Tuesday, November 04, 2014 12:47 PM
To: 'Greg Nickel'; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

From the body of the email,
Shift tab once and you are on the line with the attachements,
Now just arrow right and each attachement if titled will be red to you

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Greg Nickel
via Jfw
Sent: Tuesday, November 04, 2014 10:32
To: Jfw@lists.the-jdh.com
Subject: reading attachment titles in outlook

Hello all.

Can anyone tell me why/how JAWS does not read more than the first
attachment

in outlook when more than one attachment is present?

How do you get JAWS to read the titles of all attachments in an email

received in outlook?

I'm using JAWS 14 and Outlook 2010.



Thanks.

Greg





-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201411
04/e3044f01/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: reading attachment titles in outlook

Tim Ford
 

I have the exact same problem, I believe whenever there are a significant number or size of attachments. I have not found a solution, other than to do the save all attachments step and see what is there. Hopefully someone has a solution. My other work-around at present is to access the problem email through my available web mail client, and the attachment names all show up there an are easily accessed

Tim Ford

-----Original Message-----
From: Greg Nickel via Jfw
Sent: Tuesday, November 04, 2014 11:53 AM
To: 'david' ; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

I've tried this before thinking the same without success. I tried it here
once again both by maximizing outlook first and the open message 2nd. Still
loosing focus when arrowing right after the first attachment is read.
-----Original Message-----
From: david [mailto:davidwhitehead1957@cogeco.ca]
Sent: Tuesday, November 04, 2014 11:28 AM
To: 'Greg Nickel'; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

hello;

make sure the window is maximized when your looking for the attachment
names,

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Greg Nickel
via Jfw
Sent: Tuesday, November 4, 2014 2:23 PM
To: 'Cy Selfridge'; 'The Jaws for Windows support list.'; 'George B'
Subject: RE: reading attachment titles in outlook

This is the protocol I use: Shift+tab from body of email to attachment list
then arrow right. It only reads 1 of the attachments and then it looses
focus.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Cy Selfridge
via Jfw
Sent: Tuesday, November 04, 2014 11:14 AM
To: 'George B'; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

This is absolutely true with W7 64 bit, JAWS 14 and Office 2007.
Works like a charm.
Cy t

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of George B via
Jfw
Sent: Tuesday, November 04, 2014 11:47 AM
To: 'Greg Nickel'; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

From the body of the email,
Shift tab once and you are on the line with the attachements, Now just arrow
right and each attachement if titled will be red to you

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Greg Nickel
via Jfw
Sent: Tuesday, November 04, 2014 10:32
To: Jfw@lists.the-jdh.com
Subject: reading attachment titles in outlook

Hello all.

Can anyone tell me why/how JAWS does not read more than the first
attachment

in outlook when more than one attachment is present?

How do you get JAWS to read the titles of all attachments in an email

received in outlook?

I'm using JAWS 14 and Outlook 2010.



Thanks.

Greg





-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201411
04/e3044f01/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: reading attachment titles in outlook

Greg Nickel
 

I've tried this before thinking the same without success. I tried it here
once again both by maximizing outlook first and the open message 2nd. Still
loosing focus when arrowing right after the first attachment is read.

-----Original Message-----
From: david [mailto:davidwhitehead1957@cogeco.ca]
Sent: Tuesday, November 04, 2014 11:28 AM
To: 'Greg Nickel'; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

hello;

make sure the window is maximized when your looking for the attachment
names,

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Greg Nickel
via Jfw
Sent: Tuesday, November 4, 2014 2:23 PM
To: 'Cy Selfridge'; 'The Jaws for Windows support list.'; 'George B'
Subject: RE: reading attachment titles in outlook

This is the protocol I use: Shift+tab from body of email to attachment list
then arrow right. It only reads 1 of the attachments and then it looses
focus.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Cy Selfridge
via Jfw
Sent: Tuesday, November 04, 2014 11:14 AM
To: 'George B'; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

This is absolutely true with W7 64 bit, JAWS 14 and Office 2007.
Works like a charm.
Cy t

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of George B via
Jfw
Sent: Tuesday, November 04, 2014 11:47 AM
To: 'Greg Nickel'; 'The Jaws for Windows support list.'
Subject: RE: reading attachment titles in outlook

From the body of the email,
Shift tab once and you are on the line with the attachements, Now just arrow
right and each attachement if titled will be red to you

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Greg Nickel
via Jfw
Sent: Tuesday, November 04, 2014 10:32
To: Jfw@lists.the-jdh.com
Subject: reading attachment titles in outlook

Hello all.

Can anyone tell me why/how JAWS does not read more than the first
attachment

in outlook when more than one attachment is present?

How do you get JAWS to read the titles of all attachments in an email

received in outlook?

I'm using JAWS 14 and Outlook 2010.



Thanks.

Greg





-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201411
04/e3044f01/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com