Date   

Is this a new feature because it is annoying.

Merv Keck <blind5sparrow@...>
 

                Hello.  this is an automated response from Brian buhrow.  Due to the increasing volume of spam, it is necessary for me to verify that you really want to  send me e-mail before I read your message.  If you reply to this message, I will know that you really did intend to write to me, and your original message regarding Re: curious about Final draft, along with your reply to this verification request, will be forwarded to me immediately.  In addition, I will make a note of your e-mail address, so that you will not have to respond to these automated verification requests ever again.

                I apologize for this extra step, but I believe this will allow me to treat your e-mail with the attention it deserves, rather than spending my time deleting useless messages which ask me to help distressed African nationals transfer billions of dollars around the globe.

 

-Brian

ÿ

 

 


Re: curious about Final draft

Merv Keck <blind5sparrow@...>
 

I haven't tried writing in a while. It is something I would like to do again though. I use word 2016 for long documents and other types of literary works.

-----Original Message-----
From: Max Hudak [mailto:maxhudak@...]
Sent: Tuesday, December 1, 2015 4:49 PM
To: jfw@groups.io
Subject: Re: curious about Final draft

yes, the screen reading software, thinkit was version 9 and the
program would open and just sit there could not access any of th
menus or dropdown info. what do you use for formatting screenplays now?


On 12/1/15, Merv Keck <blind5sparrow@...> wrote:
Hi,
Are you talking about the screen writing software? I used Final Draft
Pro 7 like ten years ago and even back then it had some issues long
before the cloud started to dominate everything. When I got my new
computer in 2008 I didn't even bother transferring the license or updating the application.

-----Original Message-----
From: Max Hudak [mailto:maxhudak@...]
Sent: Tuesday, December 1, 2015 4:39 PM
To: jfw@groups.io
Subject: curious about Final draft

Hello, does anyone have any experience using Final draft with jaws in
any version? Tried to use a free trial versin and was not able to do
anything in it . thanks Max







Re: unsubscribe

Cindy Ray <cindyray@...>
 

I was going to try to send this to you privately but can’t. Have you tried one of the following:

To unsubscribe from this mailing list, send a message to jfw+unsubscribe@groups.io
Alternative archives located at: http://n2.nabble.com/JAWS-for-Windows-f2145279.html

If you have any concerns about the list, posts received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw+owner@groups.io.

 

 

From: allenk [mailto:allenk@...]
Sent: Tuesday, December 1, 2015 3:50 PM
To: jfw@groups.io
Subject: unsubscribe
Importance: High
Sensitivity: Private

 

Please get me off this list!!!!!

 


unsubscribe

allenk <allenk@...>
 

Please get me off this list!!!!!

 


Re: curious about Final draft

Max Hudak
 

yes, the screen reading software, thinkit was version 9 and the
program would open and just sit there could not access any of th
menus or dropdown info. what do you use for formatting screenplays
now?

On 12/1/15, Merv Keck <blind5sparrow@...> wrote:
Hi,
Are you talking about the screen writing software? I used Final Draft Pro 7
like ten years ago and even back then it had some issues long before the
cloud started to dominate everything. When I got my new computer in 2008 I
didn't even bother transferring the license or updating the application.

-----Original Message-----
From: Max Hudak [mailto:maxhudak@...]
Sent: Tuesday, December 1, 2015 4:39 PM
To: jfw@groups.io
Subject: curious about Final draft

Hello, does anyone have any experience using Final draft with jaws in any
version? Tried to use a free trial versin and was not able to do anything
in it . thanks Max







Re: posting to New Website

allenk <allenk@...>
 

Please get me off this list!!!!!

 

 

 

From: HH. Smith Jr. [mailto:teos1@...]
Sent: Tuesday, December 01, 2015 2:53 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

I’ll take a look.

 

From: Andre Jarreau [mailto:andre.jarreau@...]
Sent: Tuesday, December 1, 2015 3:49 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

What about WordPress for building webpages/sites and blogging?  Is WordPress worth diving into?

 

From: HH. Smith Jr. [mailto:teos1@...]
Sent: Tuesday, December 01, 2015 1:07 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

Thx, I figured that’s the way to go.

Henry

 

From: Castonguay, Guy (SSC/SPC) [mailto:guy.castonguay@...]
Sent: Tuesday, December 1, 2015 3:05 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

Hi Henry,

Cleanest way is to use Notepad and learn HTML coding. You can use Microsoft Word web view but it adds a lot of bloat (unnecessary coding) to your web pages..

 

Mes respects - Regards

Guy Castonguay

From: HH. Smith Jr. [mailto:teos1@...]
Sent: Tuesday, December 01, 2015 1:55 PM
To: jfw@groups.io
Subject: posting to New Website

 

Hi Guys,

Does anyone know of any website building software that works either JAWS version 15-17. I want to build my own website for my up and coming website accessibility firm.

Thx,

Henry

This email has been sent from a virus-free computer protected by Avast.
www.avast.com

 

This email has been sent from a virus-free computer protected by Avast.
www.avast.com

 

This email has been sent from a virus-free computer protected by Avast.
www.avast.com


Re: curious about Final draft

Merv Keck <blind5sparrow@...>
 

Hi,
Are you talking about the screen writing software? I used Final Draft Pro 7 like ten years ago and even back then it had some issues long before the cloud started to dominate everything. When I got my new computer in 2008 I didn't even bother transferring the license or updating the application.

-----Original Message-----
From: Max Hudak [mailto:maxhudak@...]
Sent: Tuesday, December 1, 2015 4:39 PM
To: jfw@groups.io
Subject: curious about Final draft

Hello, does anyone have any experience using Final draft with jaws in any version? Tried to use a free trial versin and was not able to do anything in it . thanks Max


Re: posting to New Website

Andre Jarreau <andre.jarreau@...>
 

That is exactly what I needed to hear.  Will begin the HTML learning process today.

Thanks!

 

From: James Homuth [mailto:james@...]
Sent: Tuesday, December 01, 2015 3:01 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

Minimal, though the OS and version of Office software you have installed are pretty well meaningless at this stage. If you can grasp the basics of HTML, and there are more than a few tutorials about if you can't, then you've got it better than most. From install to daily use, WP's very accessible. The actual install process doesn't take more than maybe 5 minutes. It's entirely web-based, and surprisingly very well done.


From: Andre Jarreau [mailto:andre.jarreau@...]
Sent: December-01-15 3:56 PM
To: jfw@groups.io
Subject: Re: posting to New Website

Thanks James.  Is the blog set up and useability also accessible? 

 

How long would you think the learning curve would be for an average almost technical individual working with J17 on a Win64  & Off 2010 system?

 

From: James Homuth [mailto:james@...]
Sent: Tuesday, December 01, 2015 2:40 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

There's nothing wrong with WordPress so far as accessibility goes. I'd recommend perhaps avoiding the .com version and if possible going with the self-hosted version, but it's pretty accessible. I use it on my own site.


From: HH. Smith Jr. [mailto:teos1@...]
Sent: December-01-15 2:53 PM
To: jfw@groups.io
Subject: Re: posting to New Website

I’ll take a look.

 

From: Andre Jarreau [mailto:andre.jarreau@...]
Sent: Tuesday, December 1, 2015 3:49 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

What about WordPress for building webpages/sites and blogging?  Is WordPress worth diving into?

 

From: HH. Smith Jr. [mailto:teos1@...]
Sent: Tuesday, December 01, 2015 1:07 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

Thx, I figured that’s the way to go.

Henry

 

From: Castonguay, Guy (SSC/SPC) [mailto:guy.castonguay@...]
Sent: Tuesday, December 1, 2015 3:05 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

Hi Henry,

Cleanest way is to use Notepad and learn HTML coding. You can use Microsoft Word web view but it adds a lot of bloat (unnecessary coding) to your web pages..

 

Mes respects - Regards

Guy Castonguay

From: HH. Smith Jr. [mailto:teos1@...]
Sent: Tuesday, December 01, 2015 1:55 PM
To: jfw@groups.io
Subject: posting to New Website

 

Hi Guys,

Does anyone know of any website building software that works either JAWS version 15-17. I want to build my own website for my up and coming website accessibility firm.

Thx,

Henry

This email has been sent from a virus-free computer protected by Avast.
www.avast.com

 

This email has been sent from a virus-free computer protected by Avast.
www.avast.com

 

This email has been sent from a virus-free computer protected by Avast.
www.avast.com

 




curious about Final draft

Max Hudak
 

Hello, does anyone have any experience using Final draft with jaws in
any version? Tried to use a free trial versin and was not able to do
anything in it . thanks
Max


miranda question

Kristoffer Gustafsson
 

Hi.
Has any of you used Miranda mg with jaws?
I'm trying this now, but I can't use it at all.
I can log into facebook and then?
I press on hide/show, but nothing happens at all there. I can't even
get a Messenger window.
/Kristoffer

--
Kristoffer Gustafsson
Salängsgatan 7a
tel:033-12 60 93
mobil: 0730-500934


clickable

Kimsan <kimsansong@...>
 

I’m trying to read about a job description; however, it says clickable. How do I activate a clickable element using ie 11 and jaws 16.

Thanks.


Re: Bug with jaws 17 and saying blank when reading emails

Carolyn Arnold <4carolyna@...>
 

I don't think that JAWS 17 works with Outlook Express.

Bye for now,

Carolyn

-----Original Message-----
From: Maheen via Groups.io [mailto:maheen.wick31@...]
Sent: Tuesday, December 1, 2015 4:00 AM
To: jfw@groups.io
Subject: Bug with jaws 17 and saying blank when reading emails

Hi guys,
I am licensed for jaws 17 but had to down grade back to 16 due to an
issue. When I read an email message with outlook express, jaws says blank
and I keep having to alt f 4 out of it. Have anyone else had this
problem? I use windows 10 pro 64 bit.

Maheen


Re: posting to New Website

James Homuth
 

Minimal, though the OS and version of Office software you have installed are pretty well meaningless at this stage. If you can grasp the basics of HTML, and there are more than a few tutorials about if you can't, then you've got it better than most. From install to daily use, WP's very accessible. The actual install process doesn't take more than maybe 5 minutes. It's entirely web-based, and surprisingly very well done.


From: Andre Jarreau [mailto:andre.jarreau@...]
Sent: December-01-15 3:56 PM
To: jfw@groups.io
Subject: Re: posting to New Website

Thanks James.  Is the blog set up and useability also accessible? 

 

How long would you think the learning curve would be for an average almost technical individual working with J17 on a Win64  & Off 2010 system?

 

From: James Homuth [mailto:james@...]
Sent: Tuesday, December 01, 2015 2:40 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

There's nothing wrong with WordPress so far as accessibility goes. I'd recommend perhaps avoiding the .com version and if possible going with the self-hosted version, but it's pretty accessible. I use it on my own site.


From: HH. Smith Jr. [mailto:teos1@...]
Sent: December-01-15 2:53 PM
To: jfw@groups.io
Subject: Re: posting to New Website

I’ll take a look.

 

From: Andre Jarreau [mailto:andre.jarreau@...]
Sent: Tuesday, December 1, 2015 3:49 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

What about WordPress for building webpages/sites and blogging?  Is WordPress worth diving into?

 

From: HH. Smith Jr. [mailto:teos1@...]
Sent: Tuesday, December 01, 2015 1:07 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

Thx, I figured that’s the way to go.

Henry

 

From: Castonguay, Guy (SSC/SPC) [mailto:guy.castonguay@...]
Sent: Tuesday, December 1, 2015 3:05 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

Hi Henry,

Cleanest way is to use Notepad and learn HTML coding. You can use Microsoft Word web view but it adds a lot of bloat (unnecessary coding) to your web pages..

 

Mes respects - Regards

Guy Castonguay

From: HH. Smith Jr. [mailto:teos1@...]
Sent: Tuesday, December 01, 2015 1:55 PM
To: jfw@groups.io
Subject: posting to New Website

 

Hi Guys,

Does anyone know of any website building software that works either JAWS version 15-17. I want to build my own website for my up and coming website accessibility firm.

Thx,

Henry

This email has been sent from a virus-free computer protected by Avast.
www.avast.com

 

This email has been sent from a virus-free computer protected by Avast.
www.avast.com

 

This email has been sent from a virus-free computer protected by Avast.
www.avast.com




Re: Bug with jaws 17 and saying blank when reading emails

Cindy Ray <cindyray@...>
 

Well, you could just use Outlook, though that problem (the blanks) occurs in it. I have heard that it might be an Outlook issue. I’m using Windows 10 and MS 2016.

Cindy

 

 

From: Kevin Wollenweber [mailto:dancingweed@...]
Sent: Tuesday, December 1, 2015 1:41 PM
To: jfw@groups.io
Subject: Re: Bug with jaws 17 and saying blank when reading emails

 

If JAWS 17 no longer supports Outlook Express, what is the better provider to use?

 

Kevin


Re: posting to New Website

Andre Jarreau <andre.jarreau@...>
 

Thanks James.  Is the blog set up and useability also accessible? 

 

How long would you think the learning curve would be for an average almost technical individual working with J17 on a Win64  & Off 2010 system?

 

From: James Homuth [mailto:james@...]
Sent: Tuesday, December 01, 2015 2:40 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

There's nothing wrong with WordPress so far as accessibility goes. I'd recommend perhaps avoiding the .com version and if possible going with the self-hosted version, but it's pretty accessible. I use it on my own site.


From: HH. Smith Jr. [mailto:teos1@...]
Sent: December-01-15 2:53 PM
To: jfw@groups.io
Subject: Re: posting to New Website

I’ll take a look.

 

From: Andre Jarreau [mailto:andre.jarreau@...]
Sent: Tuesday, December 1, 2015 3:49 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

What about WordPress for building webpages/sites and blogging?  Is WordPress worth diving into?

 

From: HH. Smith Jr. [mailto:teos1@...]
Sent: Tuesday, December 01, 2015 1:07 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

Thx, I figured that’s the way to go.

Henry

 

From: Castonguay, Guy (SSC/SPC) [mailto:guy.castonguay@...]
Sent: Tuesday, December 1, 2015 3:05 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

Hi Henry,

Cleanest way is to use Notepad and learn HTML coding. You can use Microsoft Word web view but it adds a lot of bloat (unnecessary coding) to your web pages..

 

Mes respects - Regards

Guy Castonguay

From: HH. Smith Jr. [mailto:teos1@...]
Sent: Tuesday, December 01, 2015 1:55 PM
To: jfw@groups.io
Subject: posting to New Website

 

Hi Guys,

Does anyone know of any website building software that works either JAWS version 15-17. I want to build my own website for my up and coming website accessibility firm.

Thx,

Henry

This email has been sent from a virus-free computer protected by Avast.
www.avast.com

 

This email has been sent from a virus-free computer protected by Avast.
www.avast.com

 

This email has been sent from a virus-free computer protected by Avast.
www.avast.com




Re: posting to New Website

James Homuth
 

There's nothing wrong with WordPress so far as accessibility goes. I'd recommend perhaps avoiding the .com version and if possible going with the self-hosted version, but it's pretty accessible. I use it on my own site.


From: HH. Smith Jr. [mailto:teos1@...]
Sent: December-01-15 2:53 PM
To: jfw@groups.io
Subject: Re: posting to New Website

I’ll take a look.

 

From: Andre Jarreau [mailto:andre.jarreau@...]
Sent: Tuesday, December 1, 2015 3:49 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

What about WordPress for building webpages/sites and blogging?  Is WordPress worth diving into?

 

From: HH. Smith Jr. [mailto:teos1@...]
Sent: Tuesday, December 01, 2015 1:07 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

Thx, I figured that’s the way to go.

Henry

 

From: Castonguay, Guy (SSC/SPC) [mailto:guy.castonguay@...]
Sent: Tuesday, December 1, 2015 3:05 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

Hi Henry,

Cleanest way is to use Notepad and learn HTML coding. You can use Microsoft Word web view but it adds a lot of bloat (unnecessary coding) to your web pages..

 

Mes respects - Regards

Guy Castonguay

From: HH. Smith Jr. [mailto:teos1@...]
Sent: Tuesday, December 01, 2015 1:55 PM
To: jfw@groups.io
Subject: posting to New Website

 

Hi Guys,

Does anyone know of any website building software that works either JAWS version 15-17. I want to build my own website for my up and coming website accessibility firm.

Thx,

Henry

This email has been sent from a virus-free computer protected by Avast.
www.avast.com

 

This email has been sent from a virus-free computer protected by Avast.
www.avast.com

 

This email has been sent from a virus-free computer protected by Avast.
www.avast.com


Re: JAWS 17 and puntuation verbosity settings.

Mike B. <mb69mach1@...>
 

Hi LeDon,

Note: The apostrophy  & dollar sign are only examples.

You can change how Jaws speaks the apostrophy in the Settings Centter
default all applications by doing the following.  If you only want to change
the punctuation settings in a particular application just open the Settings
Center while in the particular application by pressing Insert + 6, on the
number row above the main keyboard to open the Settings Center:
1. Press Insert + 6, on the number row above the main keyboard to open the
Settings Center, & press, Control, shift, + D, to open default all
applications.
2. Arrow down to, Punctuation closed & press right arrow to open.
3. Arrow down to customize punctuation & press the spacebar to open.  Don't
press enter here, if you press enter instad of the spacebar, the Settings
Center will close.
4.A. When making changes in the customize punctuation list, if you do not
want
Jaws to speak/recognize a particular punctuation mark you want to choose the
" all " selection.  You will have 4 radio buttons to arrow up or down
through.  They are none, some, most, & all.  In these selections they work
backwards than what you would think.  For example;  If you choose " none "
for the dollar sign, Jaws will speak / recognize every dollar sign in
whatever you are reading.  On the other hand, if you choose the " all "
radio button, Jaws will not speak / recognize any dollar signs.

4.B. After you pressed the spacebar on customize punctuation, you are now in
a list of punctuation marks.  Arrow down the list and when
you have the punctuation mark you want to change highlighted, tab 1 time to
the radio buttons that I mentioned earlier.
5. Keeping in mind what I mentioned earlier about these choices working
backwards, select the box in this list, in your case not wanting any
apostrophy's spoken, choose the all button.
6. Now, if you want to make a change to another punctuation mark, shift tab
back to the list and highlight a different punctuation mark, tab back to the
radio buttons and select the box you prefer.
7. After you are done making your changes tab to okay and press the
spacebar.
8. Tab to apply, press the spacebar, tab to okay, press the spacebar to save
your changes & close the Settings Center.

Now, I hope that you are not as confused as I am after typing all of this.
LOL  Hope this has helped.

Take care.
Mike

----- Original Message -----
From: Tim Ford
Sent: Tuesday, December 01, 2015 9:43 AM
Subject: JAWS 17 and puntuation verbosity settings.

Adding a subject line that is a bit more descriptive; "two questions" does
not tell us much!

Tim Ford

-----Original Message-----
From: LeDon Becker
Sent: Tuesday, December 01, 2015 9:32 AM
To: jaws-users-list@...
Subject: Re: [JAWS-Users] Two questions

I am using jaws seventeen windows ten and WLM.

I have Jaws punctuation  set up to read, none,  And that works except that
when jaws comes to an esclamation point it reads it. That is the only
punctuation  that jaws reads. How can I get jaws to not read the,
punctuation   when it comes to an esclamation point?

-----Original Message-----
From: Mike B
Sent: Sunday, November 29, 2015 11:07 PM
To: jaws-users-list@...
Subject: Re: [JAWS-Users] Two questions

Hi LeDon,

I only have an answer for question #1, actually 3 answers:
1. I have just updated to jaws seventeen and am using windows seven. . How
do I set punctuation to, none?
Answer #1:
1. If you are running Jaws from the system tray press, Insert + J, to open
the Jaws context menu.
2. Press the letter, H, to open, Help, or arrow down to Help & press enter
to open.
3. Press the letter, Z, to open the Startup Wizard...., or arrow down to,
Startup Wizard....& press enter.
4. Go through the Startup Wizard making your choices & following the
prompts.

Answer #2:
If you want your punctuation set for, None, in all applications try the
following:
1. Open the Settings Center in either of these 2 ways.
A. Press, Insert / Jaws Key + 6, on the number row above the main keyboard.
B. Press, Insert / Jaws Key + F2, to open the, Jaws Manager, arrow down, to
Settings Center, & press enter.
With the Settings Center open press, control, shift , + D, to open the
Settings Center Default All Applications.
2. Arrow down to, Punctuation, right arrow to open.
3. Arrow down to, Punctuation Level, press the spacebar until you hear Jaws
report, None.
4. Tab to the, Apply button, press the spacebar, tab to the, Okay button, &
press enter to save & close.

And the bonus answer #3 is:
While in any application press, Insert _+ V, to open Jaws quick settings,
arrow down to Punctuation, press the spacebar until you hear the level of
punctuation you want, tab to the Okay button & press enter to save / close
quick settings.
Take care.
Mike

----- Original Message -----
From: LeDon Becker
To: jaws-users-list@...
Sent: Sunday, November 29, 2015 6:33 PM
Subject: [JAWS-Users] Two questions


1. I have just updated to jaws seventeen and am using windows seven. . How
do I set punctuation to, none?
2. I have just updated to jaws seventeen and am using windows, seven, and
using WLM.  all of my emails from this email list are going to the WLM junk
file,. How do I get email from this email list to go to my inbox?

Thank you for your help. LeDon.. How do I correct this?
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/


For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/




Re: posting to New Website

HH. Smith Jr.
 

I’ll take a look.

 

From: Andre Jarreau [mailto:andre.jarreau@...]
Sent: Tuesday, December 1, 2015 3:49 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

What about WordPress for building webpages/sites and blogging?  Is WordPress worth diving into?

 

From: HH. Smith Jr. [mailto:teos1@...]
Sent: Tuesday, December 01, 2015 1:07 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

Thx, I figured that’s the way to go.

Henry

 

From: Castonguay, Guy (SSC/SPC) [mailto:guy.castonguay@...]
Sent: Tuesday, December 1, 2015 3:05 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

Hi Henry,

Cleanest way is to use Notepad and learn HTML coding. You can use Microsoft Word web view but it adds a lot of bloat (unnecessary coding) to your web pages..

 

Mes respects - Regards

Guy Castonguay

From: HH. Smith Jr. [mailto:teos1@...]
Sent: Tuesday, December 01, 2015 1:55 PM
To: jfw@groups.io
Subject: posting to New Website

 

Hi Guys,

Does anyone know of any website building software that works either JAWS version 15-17. I want to build my own website for my up and coming website accessibility firm.

Thx,

Henry

This email has been sent from a virus-free computer protected by Avast.
www.avast.com

 

This email has been sent from a virus-free computer protected by Avast.
www.avast.com

 

This email has been sent from a virus-free computer protected by Avast.
www.avast.com


Re: How to cut and paste with JAWS 16.

HH. Smith Jr.
 

Hey Ryan try this

I start out first by expanding menu with <CTRL+F1 >. Windows8.1 version16

Method 1: (easiest) Select all<CTRL+A>, Copy<CTRL+c>, then open new folder and paste<CTRL+v>

Method 2: it is best to leave menu expanded in all your file folders. i find it easier to work with.

1. Select files

2. open Home on menuBar<>ALT+H

3. Arrow to organize and press spacebar <ALT, H, O, <enter>>

4 Arrow down to Copy or move press spacebar

5. In the dropdown list choose the folder where you want files to go press enter

6. If folder not present, the last option in the list "Choose location" hit enter on it

7. Dialogue box opens in a tree view.

8. you can either create a new folder in your desired directory or arrow thru the tree view and find the desired folder then proceed with moving or copying.

 

Henry

 

From: Robert stigile [mailto:rnstechnology@...]
Sent: Tuesday, December 1, 2015 3:33 PM
To: jfw@groups.io
Subject: Re: How to cut and paste with JAWS 16.

 

it is a microsoft issue and you should give them a call to see what they can do

i know they have a number for accessibility but unfortunately i dont have it

good luck
Sent from my iPhone


On Dec 1, 2015, at 10:48 AM, Ryan McManomy <ryan.mcmanomy@...> wrote:

ok when I have all of them sulected and I cut or coppy  and paste to a new folder nothing is coppyed over I do not know if it is jaws or windows.

----- Original Message -----

Sent: Tuesday, December 1, 2015 1:30 PM

Subject: Re: How to cut and paste with JAWS 16.

 

hi

these are microsoft commands not jaws commands

control c copy

control v paste control x cut

Sent from my iPhone


On Dec 1, 2015, at 10:12 AM, Tim Ford <ttford@...> wrote:

Adding a subject line that is descriptive. 

 

Tim Ford

 

Sent: Tuesday, December 01, 2015 9:58 AM

Subject: need help

 

Hello I am useing jaws 16 and windows 8.1.
I have not been a 8.1 user for all that long.
I am having trouble with cut and coppying files.
In xp and windows 7 I could select all and cut or coppy my files and move them to where I
want them. it is not letting me do this any more why?
Are there settings I need to fix or something?
Thanks!

This email has been sent from a virus-free computer protected by Avast.
www.avast.com


Re: posting to New Website

Andre Jarreau <andre.jarreau@...>
 

What about WordPress for building webpages/sites and blogging?  Is WordPress worth diving into?

 

From: HH. Smith Jr. [mailto:teos1@...]
Sent: Tuesday, December 01, 2015 1:07 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

Thx, I figured that’s the way to go.

Henry

 

From: Castonguay, Guy (SSC/SPC) [mailto:guy.castonguay@...]
Sent: Tuesday, December 1, 2015 3:05 PM
To: jfw@groups.io
Subject: Re: posting to New Website

 

Hi Henry,

Cleanest way is to use Notepad and learn HTML coding. You can use Microsoft Word web view but it adds a lot of bloat (unnecessary coding) to your web pages..

 

Mes respects - Regards

Guy Castonguay

From: HH. Smith Jr. [mailto:teos1@...]
Sent: Tuesday, December 01, 2015 1:55 PM
To: jfw@groups.io
Subject: posting to New Website

 

Hi Guys,

Does anyone know of any website building software that works either JAWS version 15-17. I want to build my own website for my up and coming website accessibility firm.

Thx,

Henry

This email has been sent from a virus-free computer protected by Avast.
www.avast.com

 

This email has been sent from a virus-free computer protected by Avast.
www.avast.com