Date   

Re: JAWS with PuTTY

James Homuth
 

It's literally nothing special. Say all is on for that application, reading
and typing interupt are off. That's it. Useful trivia: typing interupt I
actually had to disable manually--they killed that setting a couple versions
ago.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of mike stopka
Sent: November 8, 2013 10:12 PM
To: The Jaws for Windows support list.
Subject: Re: JAWS with PuTTY

Hi james

Would like to see what you did as the scripts I use I mashed together.
Sent wirelessly from my BlackBerry device on the Bell network.
Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell.

-----Original Message-----
From: "James Homuth" <james@the-jdh.com>
Sender: "Jfw" <jfw-bounces@lists.the-jdh.com>
Date: Fri, 8 Nov 2013 21:57:17
To: 'The Jaws for Windows support list.'<jfw@lists.the-jdh.com>
Reply-To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Subject: RE: JAWS with PuTTY

I have a *very* basic thing that makes Secure CRT work more flexibly with
JAWS. It's nothing special--just negating the reading/typing interupt so
system feedback isn't cut off if your fingers are getting ahead of your
brain. It's a single .jcf file, but it seems to work for me. If there's
interest, I can make it publicly available for use. I've used it for half an
age problem free.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of mike stopka
Sent: November 8, 2013 9:41 PM
To: The Jaws for Windows support list.
Subject: Re: JAWS with PuTTY

Hi,

If you don't mind paying there's secure crt. Theirs scripts but don't
remember what the sitE address is. As far as free goes theirs cigwin or
taraterm.

Mike
Sent wirelessly from my BlackBerry device on the Bell network.
Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell.

-----Original Message-----
From: Michael Babcock <empoweringtheblind@icloud.com>
Sender: "Jfw" <jfw-bounces@lists.the-jdh.com>
Date: Fri, 08 Nov 2013 19:28:40
To: 'The Jaws for Windows support list.'<jfw@lists.the-jdh.com>
Reply-To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Subject: RE: JAWS with PuTTY

Hi;
Did you ever find anything? I'm looking for something the same.
Thanks


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Bergmann,
David
Sent: Thursday, November 7, 2013 9:37 AM
To: 'jfw@lists.the-jdh.com'
Subject: JAWS with PuTTY

Does anyone know of scripts for PuTTY that will work with JAWS 14?
Or a VT100 type terminal emulator that will work with JAWS?

Thanks

David Bergmann
Rehabilitation Technologist
Department of Rehabilitation Services
Bureau of Education and Services for the Blind
184 Windsor Ave.
Windsor, CT 06095
860-602-4146

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201311
07/982c2f49/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: JAWS with PuTTY

mike stopka <mmstopka28@...>
 

Hi james

Would like to see what you did as the scripts I use I mashed together.
Sent wirelessly from my BlackBerry device on the Bell network.
Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell.

-----Original Message-----
From: "James Homuth" <james@the-jdh.com>
Sender: "Jfw" <jfw-bounces@lists.the-jdh.com>
Date: Fri, 8 Nov 2013 21:57:17
To: 'The Jaws for Windows support list.'<jfw@lists.the-jdh.com>
Reply-To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Subject: RE: JAWS with PuTTY

I have a *very* basic thing that makes Secure CRT work more flexibly with
JAWS. It's nothing special--just negating the reading/typing interupt so
system feedback isn't cut off if your fingers are getting ahead of your
brain. It's a single .jcf file, but it seems to work for me. If there's
interest, I can make it publicly available for use. I've used it for half an
age problem free.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of mike stopka
Sent: November 8, 2013 9:41 PM
To: The Jaws for Windows support list.
Subject: Re: JAWS with PuTTY

Hi,

If you don't mind paying there's secure crt. Theirs scripts but don't
remember what the sitE address is. As far as free goes theirs cigwin or
taraterm.

Mike
Sent wirelessly from my BlackBerry device on the Bell network.
Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell.

-----Original Message-----
From: Michael Babcock <empoweringtheblind@icloud.com>
Sender: "Jfw" <jfw-bounces@lists.the-jdh.com>
Date: Fri, 08 Nov 2013 19:28:40
To: 'The Jaws for Windows support list.'<jfw@lists.the-jdh.com>
Reply-To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Subject: RE: JAWS with PuTTY

Hi;
Did you ever find anything? I'm looking for something the same.
Thanks


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Bergmann,
David
Sent: Thursday, November 7, 2013 9:37 AM
To: 'jfw@lists.the-jdh.com'
Subject: JAWS with PuTTY

Does anyone know of scripts for PuTTY that will work with JAWS 14?
Or a VT100 type terminal emulator that will work with JAWS?

Thanks

David Bergmann
Rehabilitation Technologist
Department of Rehabilitation Services
Bureau of Education and Services for the Blind
184 Windsor Ave.
Windsor, CT 06095
860-602-4146

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201311
07/982c2f49/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: JAWS with PuTTY

James Homuth
 

I have a *very* basic thing that makes Secure CRT work more flexibly with
JAWS. It's nothing special--just negating the reading/typing interupt so
system feedback isn't cut off if your fingers are getting ahead of your
brain. It's a single .jcf file, but it seems to work for me. If there's
interest, I can make it publicly available for use. I've used it for half an
age problem free.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of mike stopka
Sent: November 8, 2013 9:41 PM
To: The Jaws for Windows support list.
Subject: Re: JAWS with PuTTY

Hi,

If you don't mind paying there's secure crt. Theirs scripts but don't
remember what the sitE address is. As far as free goes theirs cigwin or
taraterm.

Mike
Sent wirelessly from my BlackBerry device on the Bell network.
Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell.

-----Original Message-----
From: Michael Babcock <empoweringtheblind@icloud.com>
Sender: "Jfw" <jfw-bounces@lists.the-jdh.com>
Date: Fri, 08 Nov 2013 19:28:40
To: 'The Jaws for Windows support list.'<jfw@lists.the-jdh.com>
Reply-To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Subject: RE: JAWS with PuTTY

Hi;
Did you ever find anything? I'm looking for something the same.
Thanks


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Bergmann,
David
Sent: Thursday, November 7, 2013 9:37 AM
To: 'jfw@lists.the-jdh.com'
Subject: JAWS with PuTTY

Does anyone know of scripts for PuTTY that will work with JAWS 14?
Or a VT100 type terminal emulator that will work with JAWS?

Thanks

David Bergmann
Rehabilitation Technologist
Department of Rehabilitation Services
Bureau of Education and Services for the Blind
184 Windsor Ave.
Windsor, CT 06095
860-602-4146

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201311
07/982c2f49/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: JAWS with PuTTY

Lee Maschmeyer
 

In my limited experience the best ssh client is OpenSSH that's included in Cygwin. I'm partially deaf though and work with speech turned off almost all the time, so I can't say how well this setup works with speech; but for braille it's rather good. The biggest limitation is that routing buttons don't work. At one point I wrote scripts to deal with this but they don't work very well anymore and I haven't bothered to fix them up.

HTH,

--

Lee Maschmeyer

"Never imagine yourself not to be otherwise than what it might appear to others that what you were or might have been was not otherwise than what you had been would have appeared to them to be otherwise."
--Lewis Carroll


Re: JAWS with PuTTY

mike stopka <mmstopka28@...>
 

Hi,

If you don't mind paying there's secure crt. Theirs scripts but don't remember what the sitE address is. As far as free goes theirs cigwin or taraterm.

Mike
Sent wirelessly from my BlackBerry device on the Bell network.
Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell.

-----Original Message-----
From: Michael Babcock <empoweringtheblind@icloud.com>
Sender: "Jfw" <jfw-bounces@lists.the-jdh.com>
Date: Fri, 08 Nov 2013 19:28:40
To: 'The Jaws for Windows support list.'<jfw@lists.the-jdh.com>
Reply-To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Subject: RE: JAWS with PuTTY

Hi;
Did you ever find anything? I'm looking for something the same.
Thanks


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Bergmann,
David
Sent: Thursday, November 7, 2013 9:37 AM
To: 'jfw@lists.the-jdh.com'
Subject: JAWS with PuTTY

Does anyone know of scripts for PuTTY that will work with JAWS 14?
Or a VT100 type terminal emulator that will work with JAWS?

Thanks

David Bergmann
Rehabilitation Technologist
Department of Rehabilitation Services
Bureau of Education and Services for the Blind
184 Windsor Ave.
Windsor, CT 06095
860-602-4146

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201311
07/982c2f49/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: JAWS with PuTTY

Michael Babcock <empoweringtheblind@...>
 

Hi;
Did you ever find anything? I'm looking for something the same.
Thanks

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Bergmann,
David
Sent: Thursday, November 7, 2013 9:37 AM
To: 'jfw@lists.the-jdh.com'
Subject: JAWS with PuTTY

Does anyone know of scripts for PuTTY that will work with JAWS 14?
Or a VT100 type terminal emulator that will work with JAWS?

Thanks

David Bergmann
Rehabilitation Technologist
Department of Rehabilitation Services
Bureau of Education and Services for the Blind
184 Windsor Ave.
Windsor, CT 06095
860-602-4146

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201311
07/982c2f49/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Is there a way to mute JAWS 14?

Feliciano G
 

Sweet thanks. Now that I did that, I just noticed that the recording isn't "original quality." I played this track that I found off the internet and I tried to make a small clip out of it. I remember when I did this with my old windows xp machine it recorded great as if it were original quality. I went into the volume control settings, but I don't really know where to look. Any ideas/suggestions?

-----Original Message-----
From: Brian and Denise Albriton
Sent: Friday, November 08, 2013 4:15 PM
To: The Jaws for Windows support list.
Subject: Re: Is there a way to mute JAWS 14?

Jaws key space bar for the layered mode and press the letter s.
You may toggle it off and on this way.


On Fri, 8 Nov 2013, Feliciano G wrote:

Hi, I have JAWS 14 on a windows 7 machine. Is there anyway I can mute JAWS? I’m trying to record something using the sound recorder, but do not want JAWS to interupt. Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20131108/e160019a/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Is there a way to mute JAWS 14?

Brian and Denise Albriton <autoharp@...>
 

Jaws key space bar for the layered mode and press the letter s.
You may toggle it off and on this way.

On Fri, 8 Nov 2013, Feliciano G wrote:

Hi, I have JAWS 14 on a windows 7 machine. Is there anyway I can mute JAWS? I’m trying to record something using the sound recorder, but do not want JAWS to interupt. Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20131108/e160019a/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Is there a way to mute JAWS 14?

Feliciano G
 

Hi, I have JAWS 14 on a windows 7 machine. Is there anyway I can mute JAWS? I’m trying to record something using the sound recorder, but do not want JAWS to interupt. Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20131108/e160019a/attachment.html>


Re: Jaws and Dragon

Mike B. <mb69mach1@...>
 

Hi Jean,

Below are some notes I found. Hope they help.

From: Marquette, Ed
Hello everyone:
This message is being dictated using Dragon Naturally Speaking. I promised
everyone that I would post a message as soon as I had fully installed Dragon
Naturally Speaking.
I did absolutely no training. This is version 11.5, and I am amazed with
its accuracy. In fact, I am dictating this e-mail message using Naturally
Speaking.
Here are some tips:
first, if you are using a laptop, your built in sound card is probably an
adequate. I would encourage you to use a USB sound card.
Second, in order to keep the Dragon Toolbar out of the way, under "options,"
be sure to put Naturally Speaking in the system tray.
Third, under Options, be sure to go to the hotkeys tab. There, create a set
of hotkeys that makes sense to you.
For those of you who are looking for a dictation solution, I highly
recommend Dragon Naturally Speaking.
Just so you know, I made absolutely no edits to this e-mail message.

From: Marquette, Ed
Hello:
Assuming you are installing this on your own machine and do not have to
worry about an information technology department's oppressive security
settings, everything should be pretty straightforward.
Sighted assistance is not necessary; however, it could be a comfort. You
will be asked to identify your sound system. Dragon will help, but you
should know something about your system.
Peter seems to have had good luck with the built in sound facility on his
laptop. I have never been able to get a built-in sound system on a laptop
to work; however, I have used nothing but ThinkPad laptops for the past 15
years. They are good machines, but this is not my choice.
Be sure to position the headset microphone properly. It should be in front
of your mouth and about one inch away. A little variation doesn't matter,
but if you have a swivel boom and the microphone is on top of your head, the
results will be disastrous.
You will be asked to check the volume of your sound system. In that step of
the installation, it really does not matter what you say. You can recite a
nursery rhyme.
In the next step in the installation, the sound systems quality is checked.
There, it is probably better to read what is on the screen. For this, you
will need to use the JAWS cursor. The text is only about two sentences.
So, this is not a big deal.
By far, the most important thing to remember is to go through the settings.
You need to be sure that Dragon Naturally Speaking is running out of the
system tray.
Most of the other settings are a matter of personal preference, and for
many, the default settings work fine.
There is an option to turn on screen reader menus. Be sure that option is
checked.
There is also a section to assign hotkeys. I do not particularly like the
default hotkeys. I rarely use the "wake-up" and "go to sleep" commands. I
usually turn the microphone on and off with a hotkey, in my case, shift plus
F-11.
Where you encounter words that Dragon does not understand, be sure to
highlight the word or phrase. Then, say "correct that." This should open
up a dialogue box. The first item in the dialog box is an edit box. There,
you can type in the correct spelling of the word that Dragon messed up. If
you hit tab on the edit box, you will be presented with a list of choices.
You can arrow down to the proper choice and hit enter, or you can simply say
"choose one" or "choose three" or whatever the item you want to select is
listed as.
I like to use the list when it works; however, for strange proper names,
Dragon probably won't be able to suggest anything helpful. Then, when you
type in the word, you can either just press enter or preferably, you should
tab over to training. To start training, say the word, and then press on
the "done" button.
Dragon will remember your word, even if it is a really strange one.
Remember, you can get help. Probably the easiest to remember is, "what can
I say." I think you can also say "show me a list of commands" or "show me
help."
Use the Jaws task switching key, shift plus F-10. The Dragon Side-Bar will
show up. You can also just say "Dragon Side Bar," and that will bring it
up. I know because while I was dictating it just now, I triggered the
Dragon Side Bar.
The help facility is a kind of HTML display, and it works very well with
Jaws.
I am sure others will have additional tips, but this should get you started.
By the way, I dictated this using Dragon Naturally Speaking.
Ed

From: Peter Holdstock
Hi, I installed it all using JAWS myself and haven't read any of the manuals
or help files as it was all pretty easy to just follow. I'd suggest when
doing any of the training (which is optional) that with JAWS coming in to
the headset, you slow the speech right down to a speed that you can read it
as that will reduce the number of pauses and errors you make whilst reading
it. Fortunately the latest version doesn't mind waiting for the pauses and
is quite forgiving. It also takes in to account corrections you make using
the keyboard as well as your voice so is always learning.

peter

From: Peter Holdstock
Hi, I don't think the correction box is so important now that it learns from
keyboard corrections i.e. just edit the word it got wrong in your document
and it should learn that. I also found with JAWS 13 that the screen reader
menu option didn't make any difference and it does say in the help to use
that option if your having problems so see how you get on.

But great info so thanks for that.

Peter

Take care.
Mike
This email was sent from my ILazyBoy.

----- Original Message -----
From: Jean
To: Jaws list
Sent: Friday, November 08, 2013 12:13 PM
Subject: Jaws and Dragon


I know Jaws and Dragon V12 work well together. I had both on my old XP
machine until it bit the dust. Now I am ready to install Dragon Naturally
Speaking Professional Version 12 on my Windows 8 laptop with Jaws 14.

Previously on this list, I think Ed had given a great description of Dragon
recommended settings so it works best with Jaws. I tried searching for that
old thread, but can’t find it. If anyone knows what those DNS settings are,
I would appreciate having that info again.

Thanks.

Jean
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20131108/c645696e/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20131108/a2119623/attachment.html>


Re: Applying Heading Level 1 Style in Word 2010

Ann Byrne
 

Press control+shift+s to get to the styles list, and arrow down a couple of times to heading1.

But have you tried rebooting? Alt+control+1 works on my computer with Office 2007 and JAWS 15.


Re: Jaws and Dragon

Jean <jemenzies@...>
 

I did, but hadn't come across it. I'll just google again if no tips come my way. Just couldn't pin it down to a particular thread.

-----Original Message-----
From: Adrian Spratt
Sent: Friday, November 8, 2013 1:37 PM
To: The Jaws for Windows support list.
Subject: RE: Jaws and Dragon

In case no one responds soon, try Google. All posts on this list are findable there.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Jean
Sent: Friday, November 08, 2013 3:13 PM
To: Jaws list
Subject: Jaws and Dragon

I know Jaws and Dragon V12 work well together. I had both on my old XP machine until it bit the dust. Now I am ready to install Dragon Naturally Speaking Professional Version 12 on my Windows 8 laptop with Jaws 14.

Previously on this list, I think Ed had given a great description of Dragon recommended settings so it works best with Jaws. I tried searching for that old thread, but can’t find it. If anyone knows what those DNS settings are, I would appreciate having that info again.

Thanks.

Jean
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20131108/c645696e/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Reading column title

Brian and Denise Albriton <autoharp@...>
 

By gollyy that works. Helps to have insert mode enabled.

On Fri, 8 Nov 2013, Kevin Hourigan wrote:

Hello Brien,
Num pad 5 should read cell contents, row and column headers, and if you go to the row of column headers, press insert, alt, control, and C, then Jaws will read the column header as you arrow left or right.
Cheers Kevin Hourigan.

-----Original Message----- From: Brian and Denise Albriton
Sent: Friday, November 08, 2013 12:02 PM
To: The Jaws for Windows support list.
Subject: Reading column title

How do you read a column title when you are like ten or 15 rows down and
you've forgotten what a particular column is for?


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com



Re: Jaws and Dragon

Adrian Spratt
 

In case no one responds soon, try Google. All posts on this list are findable there.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Jean
Sent: Friday, November 08, 2013 3:13 PM
To: Jaws list
Subject: Jaws and Dragon

I know Jaws and Dragon V12 work well together. I had both on my old XP machine until it bit the dust. Now I am ready to install Dragon Naturally Speaking Professional Version 12 on my Windows 8 laptop with Jaws 14.

Previously on this list, I think Ed had given a great description of Dragon recommended settings so it works best with Jaws. I tried searching for that old thread, but can’t find it. If anyone knows what those DNS settings are, I would appreciate having that info again.

Thanks.

Jean
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20131108/c645696e/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Reading column title

Kevin Hourigan <kevinthourigan@...>
 

Hello Brien,
Num pad 5 should read cell contents, row and column headers, and if you go to the row of column headers, press insert, alt, control, and C, then Jaws will read the column header as you arrow left or right.
Cheers Kevin Hourigan.

-----Original Message-----
From: Brian and Denise Albriton
Sent: Friday, November 08, 2013 12:02 PM
To: The Jaws for Windows support list.
Subject: Reading column title

How do you read a column title when you are like ten or 15 rows down and
you've forgotten what a particular column is for?


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com


Jaws and Dragon

Jean <jemenzies@...>
 

I know Jaws and Dragon V12 work well together. I had both on my old XP machine until it bit the dust. Now I am ready to install Dragon Naturally Speaking Professional Version 12 on my Windows 8 laptop with Jaws 14.

Previously on this list, I think Ed had given a great description of Dragon recommended settings so it works best with Jaws. I tried searching for that old thread, but can’t find it. If anyone knows what those DNS settings are, I would appreciate having that info again.

Thanks.

Jean
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20131108/c645696e/attachment.html>


Reading column title

Brian and Denise Albriton <autoharp@...>
 

How do you read a column title when you are like ten or 15 rows down and you've forgotten what a particular column is for?


Re: Skipping advertisement with j14

Mario
 

I think the feature you want is called flexible web. look for an fs cast
with Johnathan Mosen walking thru it's setup. there's also a free webinar on
this feature. you'll have to set it up for each website.
hth

----- Original Message -----
From: "John Chan" <aznboyz4sho@yahoo.com>
To: "Jaws Mailing List" <jfw@lists.the-jdh.com>
Sent: November 08, 2013 1:16 PM
Subject: Skipping advertisement with j14


How do i set up jaws 14 to do this on websites? Can it be done?

Sent from my iPhone

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Applying Heading Level 1 Style in Word 2010

Nicole Massey <nyyki@...>
 

Those heading styles should be contained in your normal.dot as well, so
making a copy of this and just dropping it in if something goes wonky should
also work.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Marks,
Jim
Sent: Friday, November 08, 2013 1:23 PM
To: The Jaws for Windows support list.
Subject: RE: Applying Heading Level 1 Style in Word 2010

Thank you, this is tremendously helpful. Looks like my installation of
MS Word deleted the heading 1 style, which means the issue is not a
Jaws issue at all. Now I know how to solve the problem, which is to
repair MS Word 2010. This list is wonderful!




------
Jim Marks
jimmarks@mt.gov

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Kevin
Hourigan
Sent: Friday, November 08, 2013 11:35 AM
To: The Jaws for Windows support list.
Subject: Re: Applying Heading Level 1 Style in Word 2010

Hello Jim,
I'm using Windows 7, with Jaws 14, and press control shift S for the
styles dialog then down arrow to Heading 1 or the other options.
Cheers Kevin Hourigan.


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Applying Heading Level 1 Style in Word 2010

Marks, Jim
 

Thank you, this is tremendously helpful. Looks like my installation of MS Word deleted the heading 1 style, which means the issue is not a Jaws issue at all. Now I know how to solve the problem, which is to repair MS Word 2010. This list is wonderful!




------
Jim Marks
jimmarks@mt.gov

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Kevin Hourigan
Sent: Friday, November 08, 2013 11:35 AM
To: The Jaws for Windows support list.
Subject: Re: Applying Heading Level 1 Style in Word 2010

Hello Jim,
I'm using Windows 7, with Jaws 14, and press control shift S for the styles dialog then down arrow to Heading 1 or the other options.
Cheers Kevin Hourigan.