Date   

Re: unknown function call to getlanguagecodeatcursor

MJ Williams <matthewjwilliams101@...>
 

I reinstalled the whole thing from the scratch and chose not to update to the latest patch.
All's well once again. :)
Thanks very much for all your help folks.
Sincerely,
Matt

At 00:03 15/07/2013, you wrote:
Hello.
If memory serves when I needed to do a repair, I went to the Help menu, alt H, then web resources, then technical Support, and typed Jaws Repair in the search edit box, I then got a list of technical support bulletins, and here was the trick, when I clicked on repair it did not take me there, but started the process. It was a while ago, so I may have missed something.
Cheers Kevin H.

-----Original Message----- From: MJ Williams
Sent: Saturday, July 13, 2013 11:00 PM
To: Jfw@lists.the-jdh.com
Subject: unknown function call to getlanguagecodeatcursor

Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: unknown function call to getlanguagecodeatcursor

Kevin Hourigan <kevinthourigan@...>
 

Hello.
If memory serves when I needed to do a repair, I went to the Help menu, alt H, then web resources, then technical Support, and typed Jaws Repair in the search edit box, I then got a list of technical support bulletins, and here was the trick, when I clicked on repair it did not take me there, but started the process. It was a while ago, so I may have missed something.
Cheers Kevin H.

-----Original Message-----
From: MJ Williams
Sent: Saturday, July 13, 2013 11:00 PM
To: Jfw@lists.the-jdh.com
Subject: unknown function call to getlanguagecodeatcursor

Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: unknown function call to getlanguagecodeatcursor

Adrian Spratt
 

Yes, this is good information. It requires that the executable file be saved to the system.

My previous message followed on an earlier suggestion that a repair can be done via "add and remove." As far as I can tell, this particular method doesn't work. I was hoping to be proven wrong, but so far it doesn't seem that I am.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Ann Byrne
Sent: Sunday, July 14, 2013 2:31 PM
To: The Jaws for Windows support list.
Subject: RE: unknown function call to getlanguagecodeatcursor

I am running JAWS 14.0.3005. when I run the j14.0.3005.64bitt.exe
file, I choose install. after it looks like JAWS is going to
re-install itself, I finally get to a dialog where I can choose to
modify, repair, oror remove the installation.
At 11:34 AM 7/14/2013, you wrote:
Not in add or remove. The only option is "uninstall." When you enter
on that, the only choice you get is between removing or not removing
shared components. Or am I missing something? What you describe,
silly as it sounds, would still make the job simpler.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Ann Byrne
Sent: Sunday, July 14, 2013 11:01 AM
To: The Jaws for Windows support list.
Subject: RE: unknown function call to getlanguagecodeatcursor

If you choose install on the version you have, JAWS will tell you
that it is already installed and asked if you want to repair. Silly
way to do things, but there you have it.
At 10:01 AM 7/14/2013, you wrote:
Note that the DVD might have an earlier version than what you have
installed. If you've downloaded and installed from the executable
file, that would be the one to work with. If you've updated via the
JAWS update feature, you might want to go to the FS website and
locate that version and download it.

I just tried finding the repair option in "Add or remove," but JAWS
has only an uninstall option in the applications menu. Other
applications have more options. I don't know why FS made JAWS repair
so difficult to get to.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Bill White
Sent: Sunday, July 14, 2013 9:55 AM
To: The Jaws for Windows support list.
Subject: Re: unknown function call to getlanguagecodeatcursor

You must use the DVD or the executable installer to find the repair option
for JAWS.
Bill White billwhite92701@dslextreme.com
----- Original Message -----
From: "MJ Williams" <matthewjwilliams101@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, July 14, 2013 12:22 AM
Subject: Re: unknown function call to getlanguagecodeatcursor


Thanks for the response. I'm afraid I can't find the repair option
anywhere.
Is there a way of resetting all scripts to the factory default?
Thanks, MattAt 07:40 14/07/2013, you wrote:
I would suspect that you had custom scripts installed before a jaws
upgrade, possibily something you ended up not even using but left
installed simply because it was easier than removing it.

Then you did a jaws update and the script broke.

If I am right doing a jaws repair should take care of it.

Go to "Add or Remove Programs" type "free" to get close and then find
the version of jaws you are running. Select repair from the context
menu.

On 7/13/13, MJ Williams <matthewjwilliams101@gmail.com> wrote:
Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Soronel Haetir
soronel.haetir@gmail.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


__________ Information from ESET NOD32 Antivirus, version of virus
signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus
signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: unknown function call to getlanguagecodeatcursor

Ann Byrne
 

I am running JAWS 14.0.3005. when I run the j14.0.3005.64bitt.exe file, I choose install. after it looks like JAWS is going to re-install itself, I finally get to a dialog where I can choose to modify, repair, oror remove the installation.

At 11:34 AM 7/14/2013, you wrote:
Not in add or remove. The only option is "uninstall." When you enter on that, the only choice you get is between removing or not removing shared components. Or am I missing something? What you describe, silly as it sounds, would still make the job simpler.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Ann Byrne
Sent: Sunday, July 14, 2013 11:01 AM
To: The Jaws for Windows support list.
Subject: RE: unknown function call to getlanguagecodeatcursor

If you choose install on the version you have, JAWS will tell you
that it is already installed and asked if you want to repair. Silly
way to do things, but there you have it.
At 10:01 AM 7/14/2013, you wrote:
Note that the DVD might have an earlier version than what you have
installed. If you've downloaded and installed from the executable
file, that would be the one to work with. If you've updated via the
JAWS update feature, you might want to go to the FS website and
locate that version and download it.

I just tried finding the repair option in "Add or remove," but JAWS
has only an uninstall option in the applications menu. Other
applications have more options. I don't know why FS made JAWS repair
so difficult to get to.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Bill White
Sent: Sunday, July 14, 2013 9:55 AM
To: The Jaws for Windows support list.
Subject: Re: unknown function call to getlanguagecodeatcursor

You must use the DVD or the executable installer to find the repair option
for JAWS.
Bill White billwhite92701@dslextreme.com
----- Original Message -----
From: "MJ Williams" <matthewjwilliams101@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, July 14, 2013 12:22 AM
Subject: Re: unknown function call to getlanguagecodeatcursor


Thanks for the response. I'm afraid I can't find the repair option
anywhere.
Is there a way of resetting all scripts to the factory default?
Thanks, MattAt 07:40 14/07/2013, you wrote:
I would suspect that you had custom scripts installed before a jaws
upgrade, possibily something you ended up not even using but left
installed simply because it was easier than removing it.

Then you did a jaws update and the script broke.

If I am right doing a jaws repair should take care of it.

Go to "Add or Remove Programs" type "free" to get close and then find
the version of jaws you are running. Select repair from the context
menu.

On 7/13/13, MJ Williams <matthewjwilliams101@gmail.com> wrote:
Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Soronel Haetir
soronel.haetir@gmail.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


__________ Information from ESET NOD32 Antivirus, version of virus
signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus
signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Using Express Scribe with JAWS

dan Kerstetter <dhk55@...>
 

The problem is quite the opposite. I don't need to boost the dictation, I
need to boost the volume of JAWS. I use an audigy CS2 for sound. I've
enabled the onboard sound . If I can get JAWS assigned to the onboard sound
and fine a long cord to use with a set of ear buds along with regular
headphones, I'll be fine until I get Windows 7.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Jean
Sent: Sunday, July 14, 2013 12:29 PM
To: The Jaws for Windows support list.
Subject: Re: Using Express Scribe with JAWS

Dan

One other thing to try that I forgot. If the audio of the file is too low,
go to the File Menu and arrow up to Special Audio Processes. Press enter on
Extra Audio Boost. Let it run whatever it does to the file. You may want to
do it several times depending on the original recording levels. This will
bring the audio of the file up, and then Jaws won't blast your ears off.

Jean


-----Original Message-----
From: dan Kerstetter
Sent: Saturday, July 13, 2013 11:17 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Using Express Scribe with JAWS

I had completely forgotten about that. Thanks for the clue.

Dan


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Gary King
Sent: Friday, July 12, 2013 9:50 PM
To: The Jaws for Windows support list.
Subject: Re: Using Express Scribe with JAWS

I suspect the separate volume adjustment would work better under Windows 7
and probably 8. In another message, you mentioned that you are using
Windows XP. Separate volume adjustment is not usually possible with XP
unless the program supports some special type of Direct Sound output such as
in Winamp.

Gary King
w4wkz@bellsouth.net
----- Original Message -----
From: "dan Kerstetter" <dhk55@comcast.net>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Friday, July 12, 2013 4:43 PM
Subject: Using Express Scribe with JAWS


I'm trying to use Express Scribe, which is transcription software,
with JAWS. The volume controls in Express Scribe will not operate
separately from my speech output.



Short of buying another sound card, reassigning JAWS to it and trying
to have dictation going in one ear and computer speech into my other
ear, is there a way to separate the JAWS volume from the dictation volume?



Dan



-------------- next part -------------- An HTML attachment was
scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201307
12/61995779/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: unknown function call to getlanguagecodeatcursor

Adrian Spratt
 

Not in add or remove. The only option is "uninstall." When you enter on that, the only choice you get is between removing or not removing shared components. Or am I missing something? What you describe, silly as it sounds, would still make the job simpler.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Ann Byrne
Sent: Sunday, July 14, 2013 11:01 AM
To: The Jaws for Windows support list.
Subject: RE: unknown function call to getlanguagecodeatcursor

If you choose install on the version you have, JAWS will tell you
that it is already installed and asked if you want to repair. Silly
way to do things, but there you have it.
At 10:01 AM 7/14/2013, you wrote:
Note that the DVD might have an earlier version than what you have
installed. If you've downloaded and installed from the executable
file, that would be the one to work with. If you've updated via the
JAWS update feature, you might want to go to the FS website and
locate that version and download it.

I just tried finding the repair option in "Add or remove," but JAWS
has only an uninstall option in the applications menu. Other
applications have more options. I don't know why FS made JAWS repair
so difficult to get to.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Bill White
Sent: Sunday, July 14, 2013 9:55 AM
To: The Jaws for Windows support list.
Subject: Re: unknown function call to getlanguagecodeatcursor

You must use the DVD or the executable installer to find the repair option
for JAWS.
Bill White billwhite92701@dslextreme.com
----- Original Message -----
From: "MJ Williams" <matthewjwilliams101@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, July 14, 2013 12:22 AM
Subject: Re: unknown function call to getlanguagecodeatcursor


Thanks for the response. I'm afraid I can't find the repair option
anywhere.
Is there a way of resetting all scripts to the factory default?
Thanks, MattAt 07:40 14/07/2013, you wrote:
I would suspect that you had custom scripts installed before a jaws
upgrade, possibily something you ended up not even using but left
installed simply because it was easier than removing it.

Then you did a jaws update and the script broke.

If I am right doing a jaws repair should take care of it.

Go to "Add or Remove Programs" type "free" to get close and then find
the version of jaws you are running. Select repair from the context
menu.

On 7/13/13, MJ Williams <matthewjwilliams101@gmail.com> wrote:
Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Soronel Haetir
soronel.haetir@gmail.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


__________ Information from ESET NOD32 Antivirus, version of virus
signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus
signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Using Express Scribe with JAWS

Jean <jemenzies@...>
 

Dan

One other thing to try that I forgot. If the audio of the file is too low, go to the File Menu and arrow up to Special Audio Processes. Press enter on Extra Audio Boost. Let it run whatever it does to the file. You may want to do it several times depending on the original recording levels. This will bring the audio of the file up, and then Jaws won't blast your ears off.

Jean

-----Original Message-----
From: dan Kerstetter
Sent: Saturday, July 13, 2013 11:17 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Using Express Scribe with JAWS

I had completely forgotten about that. Thanks for the clue.

Dan


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Gary King
Sent: Friday, July 12, 2013 9:50 PM
To: The Jaws for Windows support list.
Subject: Re: Using Express Scribe with JAWS

I suspect the separate volume adjustment would work better under Windows 7
and probably 8. In another message, you mentioned that you are using
Windows XP. Separate volume adjustment is not usually possible with XP
unless the program supports some special type of Direct Sound output such as
in Winamp.

Gary King
w4wkz@bellsouth.net
----- Original Message -----
From: "dan Kerstetter" <dhk55@comcast.net>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Friday, July 12, 2013 4:43 PM
Subject: Using Express Scribe with JAWS


I'm trying to use Express Scribe, which is transcription software, with
JAWS. The volume controls in Express Scribe will not operate separately
from my speech output.



Short of buying another sound card, reassigning JAWS to it and trying to
have dictation going in one ear and computer speech into my other ear, is
there a way to separate the JAWS volume from the dictation volume?



Dan



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201307
12/61995779/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: unknown function call to getlanguagecodeatcursor

Adrian Spratt
 

Note that the DVD might have an earlier version than what you have installed. If you've downloaded and installed from the executable file, that would be the one to work with. If you've updated via the JAWS update feature, you might want to go to the FS website and locate that version and download it.

I just tried finding the repair option in "Add or remove," but JAWS has only an uninstall option in the applications menu. Other applications have more options. I don't know why FS made JAWS repair so difficult to get to.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Bill White
Sent: Sunday, July 14, 2013 9:55 AM
To: The Jaws for Windows support list.
Subject: Re: unknown function call to getlanguagecodeatcursor

You must use the DVD or the executable installer to find the repair option
for JAWS.
Bill White billwhite92701@dslextreme.com
----- Original Message -----
From: "MJ Williams" <matthewjwilliams101@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, July 14, 2013 12:22 AM
Subject: Re: unknown function call to getlanguagecodeatcursor


Thanks for the response. I'm afraid I can't find the repair option
anywhere.
Is there a way of resetting all scripts to the factory default?
Thanks, MattAt 07:40 14/07/2013, you wrote:
I would suspect that you had custom scripts installed before a jaws
upgrade, possibily something you ended up not even using but left
installed simply because it was easier than removing it.

Then you did a jaws update and the script broke.

If I am right doing a jaws repair should take care of it.

Go to "Add or Remove Programs" type "free" to get close and then find
the version of jaws you are running. Select repair from the context
menu.

On 7/13/13, MJ Williams <matthewjwilliams101@gmail.com> wrote:
Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Soronel Haetir
soronel.haetir@gmail.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


__________ Information from ESET NOD32 Antivirus, version of virus
signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: unknown function call to getlanguagecodeatcursor

Ann Byrne
 

If you choose install on the version you have, JAWS will tell you that it is already installed and asked if you want to repair. Silly way to do things, but there you have it.

At 10:01 AM 7/14/2013, you wrote:
Note that the DVD might have an earlier version than what you have installed. If you've downloaded and installed from the executable file, that would be the one to work with. If you've updated via the JAWS update feature, you might want to go to the FS website and locate that version and download it.

I just tried finding the repair option in "Add or remove," but JAWS has only an uninstall option in the applications menu. Other applications have more options. I don't know why FS made JAWS repair so difficult to get to.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Bill White
Sent: Sunday, July 14, 2013 9:55 AM
To: The Jaws for Windows support list.
Subject: Re: unknown function call to getlanguagecodeatcursor

You must use the DVD or the executable installer to find the repair option
for JAWS.
Bill White billwhite92701@dslextreme.com
----- Original Message -----
From: "MJ Williams" <matthewjwilliams101@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, July 14, 2013 12:22 AM
Subject: Re: unknown function call to getlanguagecodeatcursor


Thanks for the response. I'm afraid I can't find the repair option
anywhere.
Is there a way of resetting all scripts to the factory default?
Thanks, MattAt 07:40 14/07/2013, you wrote:
I would suspect that you had custom scripts installed before a jaws
upgrade, possibily something you ended up not even using but left
installed simply because it was easier than removing it.

Then you did a jaws update and the script broke.

If I am right doing a jaws repair should take care of it.

Go to "Add or Remove Programs" type "free" to get close and then find
the version of jaws you are running. Select repair from the context
menu.

On 7/13/13, MJ Williams <matthewjwilliams101@gmail.com> wrote:
Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Soronel Haetir
soronel.haetir@gmail.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


__________ Information from ESET NOD32 Antivirus, version of virus
signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: unknown function call to getlanguagecodeatcursor

Bill White <billwhite92701@...>
 

You must use the DVD or the executable installer to find the repair option for JAWS.
Bill White billwhite92701@dslextreme.com

----- Original Message -----
From: "MJ Williams" <matthewjwilliams101@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, July 14, 2013 12:22 AM
Subject: Re: unknown function call to getlanguagecodeatcursor


Thanks for the response. I'm afraid I can't find the repair option anywhere.
Is there a way of resetting all scripts to the factory default?
Thanks, MattAt 07:40 14/07/2013, you wrote:
I would suspect that you had custom scripts installed before a jaws
upgrade, possibily something you ended up not even using but left
installed simply because it was easier than removing it.

Then you did a jaws update and the script broke.

If I am right doing a jaws repair should take care of it.

Go to "Add or Remove Programs" type "free" to get close and then find
the version of jaws you are running. Select repair from the context
menu.

On 7/13/13, MJ Williams <matthewjwilliams101@gmail.com> wrote:
Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Soronel Haetir
soronel.haetir@gmail.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


__________ Information from ESET NOD32 Antivirus, version of virus signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com


Re: unknown function call to getlanguagecodeatcursor

MJ Williams <matthewjwilliams101@...>
 

Thanks for the response. I'm afraid I can't find the repair option anywhere.
Is there a way of resetting all scripts to the factory default?
Thanks, MattAt 07:40 14/07/2013, you wrote:

I would suspect that you had custom scripts installed before a jaws
upgrade, possibily something you ended up not even using but left
installed simply because it was easier than removing it.

Then you did a jaws update and the script broke.

If I am right doing a jaws repair should take care of it.

Go to "Add or Remove Programs" type "free" to get close and then find
the version of jaws you are running. Select repair from the context
menu.

On 7/13/13, MJ Williams <matthewjwilliams101@gmail.com> wrote:
Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Soronel Haetir
soronel.haetir@gmail.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: unknown function call to getlanguagecodeatcursor

Soronel Haetir
 

I would suspect that you had custom scripts installed before a jaws
upgrade, possibily something you ended up not even using but left
installed simply because it was easier than removing it.

Then you did a jaws update and the script broke.

If I am right doing a jaws repair should take care of it.

Go to "Add or Remove Programs" type "free" to get close and then find
the version of jaws you are running. Select repair from the context
menu.

On 7/13/13, MJ Williams <matthewjwilliams101@gmail.com> wrote:
Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
--
Soronel Haetir
soronel.haetir@gmail.com


unknown function call to getlanguagecodeatcursor

MJ Williams <matthewjwilliams101@...>
 

Dear all,
When in table mode, pressing any key assigned to a navigation function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


Re: Focus 40 Blue

Drew Hunthausen
 

So glad you found it!! It frustrated me to no end at first also!

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Richard
Holloway
Sent: Saturday, July 13, 2013 4:03 PM
To: The Jaws for Windows support list.
Subject: Re: Focus 40 Blue

So simple, and yet such a huge stumbling block... You are my daughter's new
hero!

Found the link too. The magic term to add in the search was "iOS".

If anyone needs it:

http://www.freedomscientific.com/documentation/Focus14-Blue/Focus-Blue-iOS-S
upport.htm

Thanks again!

On Jul 13, 2013, at 6:39 PM, Drew Hunthausen wrote:

Richard,
I had this problem also as I recently got a focus 14 display. The
trick is that you need to do a dots 7 or dot 8 cord, meaning with the
addition of the space bar for the commands to work. I don't have the
direct link, but if you do a google search for focus 40 ipod key
commands or something like that, freedom scientific has a whole
section that gives you all the special commands for the display and
idevice. Hope this helps


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Richard
Holloway
Sent: Saturday, July 13, 2013 3:19 PM
To: The Jaws for Windows support list.
Subject: Focus 40 Blue

My daughter is trying to use a new generation Focus 40 Blue braille
display with an iPod. The Bluetooth connection seems to pair just
fine. She can type and read braille in non-contracted or contracted
mode, BUT neither backspace / delete (dot 7) or enter / line feed (dot 8)
seem to work.

We looked at the 8 dot braille mode setting on the iPod (in case it
was ignoring dots 7 and 8 because that mode was off). Didn't seem
likely, but I wanted to check all I could before I asked for help.
That seems to be un-contacted computer braille, so apparently that has
nothing to do with it.
Surely there is a simple way to have dots 7 and 8 work for those
functions with an iDevice just like one would with JAWS on a PC.

This is a brand new display fresh out of the box, so if there are any
settings to be made in the unit, they should all still be in factory
default positions. I saw something about some options which I think
are configured through JAWS when connected to a PC, but it would seem
unlikely that needs to be done for such a basic thing as using backspace
and enter.

I suspect we are overlooking some very basic settings issue. I know
this is a bit off topic, but maybe someone could help with this
off-list or point us to a list for Focus 40 Blue display users pairing
to iPods please? My daughter is only 10 and not very patient, so any
help might make this day a lot less long in our house, if you follow me...

Thanks!
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1432 / Virus Database: 3204/5988 - Release Date:
07/13/13


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1432 / Virus Database: 3204/5989 - Release Date: 07/13/13


Re: Focus 40 Blue

Brian and Denise Albriton <autoharp@...>
 

The one thing that will work is chord-d, in other words spcebar and letter d

On Sat, 13 Jul 2013, Richard Holloway wrote:

My daughter is trying to use a new generation Focus 40 Blue braille display with an iPod. The Bluetooth connection seems to pair just fine. She can type and read braille in non-contracted or contracted mode, BUT neither backspace / delete (dot 7) or enter / line feed (dot 8) seem to work.

We looked at the 8 dot braille mode setting on the iPod (in case it was ignoring dots 7 and 8 because that mode was off). Didn't seem likely, but I wanted to check all I could before I asked for help. That seems to be un-contacted computer braille, so apparently that has nothing to do with it. Surely there is a simple way to have dots 7 and 8 work for those functions with an iDevice just like one would with JAWS on a PC.

This is a brand new display fresh out of the box, so if there are any settings to be made in the unit, they should all still be in factory default positions. I saw something about some options which I think are configured through JAWS when connected to a PC, but it would seem unlikely that needs to be done for such a basic thing as using backspace and enter.

I suspect we are overlooking some very basic settings issue. I know this is a bit off topic, but maybe someone could help with this off-list or point us to a list for Focus 40 Blue display users pairing to iPods please? My daughter is only 10 and not very patient, so any help might make this day a lot less long in our house, if you follow me...

Thanks!
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Focus 40 Blue

Richard Holloway
 

So simple, and yet such a huge stumbling block... You are my daughter's new hero!

Found the link too. The magic term to add in the search was "iOS".

If anyone needs it:

http://www.freedomscientific.com/documentation/Focus14-Blue/Focus-Blue-iOS-Support.htm

Thanks again!

On Jul 13, 2013, at 6:39 PM, Drew Hunthausen wrote:

Richard,
I had this problem also as I recently got a focus 14 display. The trick is
that you need to do a dots 7 or dot 8 cord, meaning with the addition of the
space bar for the commands to work. I don't have the direct link, but if you
do a google search for focus 40 ipod key commands or something like that,
freedom scientific has a whole section that gives you all the special
commands for the display and idevice. Hope this helps


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Richard
Holloway
Sent: Saturday, July 13, 2013 3:19 PM
To: The Jaws for Windows support list.
Subject: Focus 40 Blue

My daughter is trying to use a new generation Focus 40 Blue braille display
with an iPod. The Bluetooth connection seems to pair just fine. She can type
and read braille in non-contracted or contracted mode, BUT neither backspace
/ delete (dot 7) or enter / line feed (dot 8) seem to work.

We looked at the 8 dot braille mode setting on the iPod (in case it was
ignoring dots 7 and 8 because that mode was off). Didn't seem likely, but I
wanted to check all I could before I asked for help. That seems to be
un-contacted computer braille, so apparently that has nothing to do with it.
Surely there is a simple way to have dots 7 and 8 work for those functions
with an iDevice just like one would with JAWS on a PC.

This is a brand new display fresh out of the box, so if there are any
settings to be made in the unit, they should all still be in factory default
positions. I saw something about some options which I think are configured
through JAWS when connected to a PC, but it would seem unlikely that needs
to be done for such a basic thing as using backspace and enter.

I suspect we are overlooking some very basic settings issue. I know this is
a bit off topic, but maybe someone could help with this off-list or point us
to a list for Focus 40 Blue display users pairing to iPods please? My
daughter is only 10 and not very patient, so any help might make this day a
lot less long in our house, if you follow me...

Thanks!
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1432 / Virus Database: 3204/5988 - Release Date: 07/13/13


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Focus 40 Blue

Drew Hunthausen
 

Richard,
I had this problem also as I recently got a focus 14 display. The trick is
that you need to do a dots 7 or dot 8 cord, meaning with the addition of the
space bar for the commands to work. I don't have the direct link, but if you
do a google search for focus 40 ipod key commands or something like that,
freedom scientific has a whole section that gives you all the special
commands for the display and idevice. Hope this helps

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Richard
Holloway
Sent: Saturday, July 13, 2013 3:19 PM
To: The Jaws for Windows support list.
Subject: Focus 40 Blue

My daughter is trying to use a new generation Focus 40 Blue braille display
with an iPod. The Bluetooth connection seems to pair just fine. She can type
and read braille in non-contracted or contracted mode, BUT neither backspace
/ delete (dot 7) or enter / line feed (dot 8) seem to work.

We looked at the 8 dot braille mode setting on the iPod (in case it was
ignoring dots 7 and 8 because that mode was off). Didn't seem likely, but I
wanted to check all I could before I asked for help. That seems to be
un-contacted computer braille, so apparently that has nothing to do with it.
Surely there is a simple way to have dots 7 and 8 work for those functions
with an iDevice just like one would with JAWS on a PC.

This is a brand new display fresh out of the box, so if there are any
settings to be made in the unit, they should all still be in factory default
positions. I saw something about some options which I think are configured
through JAWS when connected to a PC, but it would seem unlikely that needs
to be done for such a basic thing as using backspace and enter.

I suspect we are overlooking some very basic settings issue. I know this is
a bit off topic, but maybe someone could help with this off-list or point us
to a list for Focus 40 Blue display users pairing to iPods please? My
daughter is only 10 and not very patient, so any help might make this day a
lot less long in our house, if you follow me...

Thanks!
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1432 / Virus Database: 3204/5988 - Release Date: 07/13/13


Focus 40 Blue

Richard Holloway
 

My daughter is trying to use a new generation Focus 40 Blue braille display with an iPod. The Bluetooth connection seems to pair just fine. She can type and read braille in non-contracted or contracted mode, BUT neither backspace / delete (dot 7) or enter / line feed (dot 8) seem to work.

We looked at the 8 dot braille mode setting on the iPod (in case it was ignoring dots 7 and 8 because that mode was off). Didn't seem likely, but I wanted to check all I could before I asked for help. That seems to be un-contacted computer braille, so apparently that has nothing to do with it. Surely there is a simple way to have dots 7 and 8 work for those functions with an iDevice just like one would with JAWS on a PC.

This is a brand new display fresh out of the box, so if there are any settings to be made in the unit, they should all still be in factory default positions. I saw something about some options which I think are configured through JAWS when connected to a PC, but it would seem unlikely that needs to be done for such a basic thing as using backspace and enter.

I suspect we are overlooking some very basic settings issue. I know this is a bit off topic, but maybe someone could help with this off-list or point us to a list for Focus 40 Blue display users pairing to iPods please? My daughter is only 10 and not very patient, so any help might make this day a lot less long in our house, if you follow me...

Thanks!


Re: Headset needed for call center work

Luis Difut
 

Ok, thanks! This is what I was thinking of doing till I can afford the
Plantronics (might as well be gold) headphones.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Paul Lemm
Sent: Saturday, July 13, 2013 8:58 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Headset needed for call center work

Hi,

I work in a call centre myself, I use just a phone head set that only has
one ear piece and then just use a standard set of ear phones/buds and
listen to jaws in the other ear through those


Paul
-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Mike B.
Sent: Friday, July 12, 2013 2:37 PM
To: The Jaws for Windows support list.
Subject: Re: Headset needed for call center work

Hi Luis,

I don't have any personal experience with the headsets information below
but, the last 1 might be your best bet.

This headset allows you to listen to both your computer and the telephone at
the same time.

Name, Dual Head Sets by Plantronics.
Model or part number SMH1783-11. Price $350.00 to $400.00.

Name of distributor, Phone supplements
Phone, 1-800-742-1800


I've used Plantronics for years. The newer models unplug part way down the
cord so you can switch out the end you need. I have an eighth inch plug on 1
side and a phone plug on the other. I believe the model line you are needing
is the Supra. Don't let someone talk you into a stereo set, it won't work.

Here is the contact info for a company called Headsets Direct. That's where
I got my last set from.

Keep in mind everyone doesn't understand what we need with a different cord
for each ear. I know the best person you will talk to there is Ed, in tech
support. Everyone is friendly, and I've never spoken with anyone that didn't
speak English clearly...

1-888-244-0483 Toll Free . 928-777-9100 Telephone .
www.HeadsetsDirect.com
Bob

Hello Jim, I agree with others on this list that Plantronics equipment is
the way to go. For some reason buying from vendors is cheaper than buying
from Plantronics direct. SKC Communication Products Inc.

800 882 7779

SMH1783-11 headset special, price around $240.00I think

Also get the optional AC adapter 26503-01

If they ask who told you, Art from Pittsburgh.

Good luck.

Hello Mark,

Here is what you are looking for, I used these for many years earning a
living.
They are called "Dual Headsets".
One ear goes to your telephone, which has a small special box in-between
your telephone and the headphone jack, which allows you to control tone,
volume, mute and such, while the other ear goes directly to your computer
where you can hear your JAWS.

In every company I worked for, Humana Health Plans, The Miami-Herald
Newspaper, American Bankers, this is the Brand name of the Head Sets their
Customer Service Intake people used, the only difference being I used a
"Dual Channel" set, while the sighted folks used one channel sets.

The headset has a boom mike, it looks about like a coffee stirrer which you
speak into.

They are made of the highest quality material, very durable, yet very
comfortable, adjustable, they will send you parts, like the ear foam
cushions that get old after a year or so, immediately with a single
telephone call to their parts department.

Well, they are the top of the line.
And the price expresses that also.

***

Plantronics

United States - - Information on Products and Services

Toll Free telephone number 1-800-544-4660

Telephone number (831) 4426-5858

Fax-on -Demand

Address:

345 Encinal Street

Santa Cruz, California 95060

Toll-Free: 890.544.4660 Prompt 4 Direct Dial.- 650.598.4330

United States - Information an Products and Services

CHOOSE PLANTRONICS Sound Quality 170 Coiiifort and

Part number

15729-05

SKCCommunications Inc

1-800-882-7779

oice Tube

17593-01

Model number

Dual Channel Head Sets

Jan

Ext# 0

ID

5461



Hope 1 of the above helps.
Take care.
Mike
This email was sent from my, iBarstool.

----- Original Message -----
From: Luis Difut
To: 'The Jaws for Windows support list.'
Sent: Friday, July 12, 2013 2:23 AM
Subject: Headset needed for call center work


Hello,
I have read on this list about headsets that connect your computer headset &
a telephone so Jaws would be in one ear and the phone call in the other.
Could someone please let me know the make & model I would need to get for
this task.

Thanks.
Luis...



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201307
12/3734a5be/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Using Express Scribe with JAWS

dan Kerstetter <dhk55@...>
 

I had completely forgotten about that. Thanks for the clue.

Dan

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Gary King
Sent: Friday, July 12, 2013 9:50 PM
To: The Jaws for Windows support list.
Subject: Re: Using Express Scribe with JAWS

I suspect the separate volume adjustment would work better under Windows 7
and probably 8. In another message, you mentioned that you are using
Windows XP. Separate volume adjustment is not usually possible with XP
unless the program supports some special type of Direct Sound output such as
in Winamp.

Gary King
w4wkz@bellsouth.net
----- Original Message -----
From: "dan Kerstetter" <dhk55@comcast.net>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Friday, July 12, 2013 4:43 PM
Subject: Using Express Scribe with JAWS


I'm trying to use Express Scribe, which is transcription software, with
JAWS. The volume controls in Express Scribe will not operate separately
from my speech output.



Short of buying another sound card, reassigning JAWS to it and trying to
have dictation going in one ear and computer speech into my other ear, is
there a way to separate the JAWS volume from the dictation volume?



Dan



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201307
12/61995779/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com