Date   

Re: does jaws work with windows 8.

David Bailes
 

Hi Jen,
concerning much tabbing. On a ribbon tab you can use ctrl+right arrow and control+left arrow to move between the groups of controls on a tab. So if you know or guess which group a control is in, this can greatly reduce the number of tabs to move to a control.
More details about the ribbon in file explorer in windows 8 can be found in the ribbon section of this guide:
http://goo.gl/MlFuf
 
David.
 
 
 
original message:
yes, but only with the professional version, which his what I have. IT
is pretty proficient and there are a vfew shortcut keys to locate
foldres and such,j and unfortunately without the use of a mouse, much
tabbing involved in the menus. I'm used to it now and it's a little
slower but it does work. I'm learning the ropes on it, to. Win. 8 is
new to me..
Jen


Re: Downloading and Saving attachments in Windows 8 Mail

David Bailes
 

Hi Gilbert,
On my computer, in the list of messages Jaws says if there is an attachment. Also, there is a button for save/open before the message.
Are you using the latest version of windows 8 mail and Jaws 14?
Windows 8 apps are updated in the store, not by the usual windows update.
If you open then store, then if there are updates and you press tab, you're taken to an updates link, and if you open this you're taken to a page where you can update apps.
Unfortunately, Jaws does not read the updates link. You can either press tab and enter and see where you end up, or alternatively temporarily use the narrator screen reader, which does read this link.
To turn narrator on, press windows key + enter, and to turn it off, press caps lock + esc. You don't have to turn jaws off when you do this.
 
David.
 
original message:
Does anyone know how to download and save attachments with Windows 8 Mail? I have some email with an attachment, but the attachment will not show. The attachment doesn’t show in the virtual window, and when I tab through the controls, Jaws does not announce the attachment anywhere through my tabbing cycle. When I tab, I here the list box containing the various folders, then the list box containing my messages, then new, then delete, then respond, then there is a button labeled with who the sender is, then another button with my name, and then the virtual window from which I can read the message, but no attachment window. What do I do?



Gilbert Neiva


Re: Door Prize Drawings

Brandon Keith Biggs <brandonkeithbiggs@...>
 

Hello,
You could have any fairly competent programmer develop a program to randomize a name picker. You would just need to enter all the names manually.
Thanks,

Brandon Keith Biggs

-----Original Message-----
From: Steve & Shannon Cook
Sent: Wednesday, May 01, 2013 6:33 PM
To: 'The Jaws for Windows support list.'
Subject: Door Prize Drawings

Hi All,

Does anyone know of a way to perform door prize drawings in electronic
format? I guess what I am asking. Is there any software you can use on a
computer that is accessible with JAWS to use for drawings such at a large
state convention? Looking for a way that would be more creditable than the
old way of having names on a piece of paper and someone drawing the name
from the bucket. Thanks in advance!

Steve


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Control labels on braille display

Brian and Denise Albriton <autoharp@...>
 

I'm trying to find out how to get rid of rded and other control labels on my pacmate braille display. I'm using jaws 14.
Brian


i can't change the amount of skype credit i want to buy

carlos g <dal747@...>
 

Hi folks,
I'm Carlos.
I am running jaws 13 version 1006 on an xp machine and a windows 7 net book.
I just went to www.skype.com because I needed to buy some skype credit for my account.
I haven't used skype very much lately and i guess there have been some changes.
I went to billing then buy skype credit.
and it gave me a table with the amount of $10.00 dollars.
and a 0.00 vat a total of $10.00.
I also should say i have another screen reader window eyes and i tried it with jaws 13 and window eyes 6.1 and 7.5.4.1.
I could not change the amount of $10.00 dollars using both screen readers and my xp machine and my windows net book.
I tried looking in to google and found one posting by someone also using a screen reader with the same problem,
but there was no resolution the that post.
so since i know there are a lot of skype users out there any help would be appreciated.
Also if any one can help with the best settings for using skype with screen readers i would appreciate it.
or are there any pod casts or good web tutorials.
Thanks.
Carlos

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20130502/440a4bd8/attachment.html>


Re: does jaws work with windows 8.

rodney jackson <jackson_mr@...>
 

Jen
Before you used win8 did you use win7?
Where did you download the classic start?
I went to ninite.com to get the classic start and when I installed it it
automatically set it up to look like win7. Anything I had on the desktop
stayed
You can go through the settings and also make it look like windows xp
I will have to turn on the win8 compute later to see how it put everything..

I am still learning the terms, I am assuming that the tiles is what I see
when I first log into windows where I can type a in the edit box to locate
something, well if you are navigating through the start menu and locate
start screen it shows those tiles but if you hit the start menu again the
tiles go away.
I am so used to win7 so I find it it is easier to find what I am looking
for.
But all the programs you had with the tiles and charms and now in the
classic start menu.
I hope I am explaining this correctly.
But as far as NVDA, it is much clearer then it used to be and I find that
the keystrokes are a combination between jaws and window eyes.
But since I do have so many computers I use jaws on my primary computer
which is the one I am on now.
rodney

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Jennifer
Tissot
Sent: Wednesday, May 01, 2013 7:16 PM
To: The Jaws for Windows support list.
Subject: Re: does jaws work with windows 8.

I have tried NVDA but find the irritating and hard to understand and
the keystrikes a little little complex than I like. Also, I was able
to load the same Jaws disk without buyihng multiple copies to put onto
my laptop and desktop, one running 32 bit, the other 64 bit but both
Win. 8. I honestly had the Classic Shell installed but didn't know how
to use it. I tried reinstalling and wonder if I did it right, since
the normal tiles don't show up anymore when loading my desktop. do you
know what I mean? They only show up when I do certain files, but can'
can't nail down the specifics of how to access them when on this
desktop mode. Is this normal or is esthe tiles as before. Even the
serach search charm disappeared when trying to put Claasiic Classic
Shell on . IS this normal forfunctionality or did something bad happen
to my desktop?
Jen

On 5/1/13, rodney jackson <jackson_mr@...> wrote:
Jen or anyone else,
Have you tried the classic start for windows 8, so it works like win7?
On one of my computers I have windows 8 pro 64 bit and I installed it,
however on that computer I am not using jaws, can not afford to put jaws
on
all my machines.
So I am using NVDA on it and works well, was wondering if anyone has
tried
it with jaws
Rodney



-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Jennifer
Tissot
Sent: Wednesday, May 01, 2013 4:13 PM
To: The Jaws for Windows support list.
Subject: Re: does jaws work with windows 8.

yes, but only with the professional version, which his what I have. IT
is pretty proficient and there are a vfew shortcut keys to locate
foldres and such,j and unfortunately without the use of a mouse, much
tabbing involved in the menus. I'm used to it now and it's a little
slower but it does work. I'm learning the ropes on it, to. Win. 8 is
new to me..
Jen

On 4/30/13, Joseph Lee <joseph.lee22590@...> wrote:
Hi,
Yes, JAWS 14 and above works with Windows 8.
Cheers,
Joseph

----- Original Message -----
From: rhonda cruz <rhondaprincess@...
To: "The Jaws for Windows support list." <Jfw@...
Date sent: Tue, 30 Apr 2013 18:14:07 -0700
Subject: does jaws work with windows 8.

hello does jaws work with windows 8.
lab top.
my rehab. services.
will get me a computer for work & home use.
but i'm wondering if jaws will work with a new lab top with
windows 8.
i've been a long time jaws user.
for many years now.


from rhonda.


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Door Prize Drawings

Steve & Shannon Cook <cookcafe@...>
 

Hi All,

Does anyone know of a way to perform door prize drawings in electronic
format? I guess what I am asking. Is there any software you can use on a
computer that is accessible with JAWS to use for drawings such at a large
state convention? Looking for a way that would be more creditable than the
old way of having names on a piece of paper and someone drawing the name
from the bucket. Thanks in advance!

Steve


Re: does jaws work with windows 8.

Jennifer Tissot
 

I have tried NVDA but find the irritating and hard to understand and
the keystrikes a little little complex than I like. Also, I was able
to load the same Jaws disk without buyihng multiple copies to put onto
my laptop and desktop, one running 32 bit, the other 64 bit but both
Win. 8. I honestly had the Classic Shell installed but didn't know how
to use it. I tried reinstalling and wonder if I did it right, since
the normal tiles don't show up anymore when loading my desktop. do you
know what I mean? They only show up when I do certain files, but can'
can't nail down the specifics of how to access them when on this
desktop mode. Is this normal or is esthe tiles as before. Even the
serach search charm disappeared when trying to put Claasiic Classic
Shell on . IS this normal forfunctionality or did something bad happen
to my desktop?
Jen

On 5/1/13, rodney jackson <jackson_mr@...> wrote:
Jen or anyone else,
Have you tried the classic start for windows 8, so it works like win7?
On one of my computers I have windows 8 pro 64 bit and I installed it,
however on that computer I am not using jaws, can not afford to put jaws
on
all my machines.
So I am using NVDA on it and works well, was wondering if anyone has tried
it with jaws
Rodney



-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Jennifer
Tissot
Sent: Wednesday, May 01, 2013 4:13 PM
To: The Jaws for Windows support list.
Subject: Re: does jaws work with windows 8.

yes, but only with the professional version, which his what I have. IT
is pretty proficient and there are a vfew shortcut keys to locate
foldres and such,j and unfortunately without the use of a mouse, much
tabbing involved in the menus. I'm used to it now and it's a little
slower but it does work. I'm learning the ropes on it, to. Win. 8 is
new to me..
Jen

On 4/30/13, Joseph Lee <joseph.lee22590@...> wrote:
Hi,
Yes, JAWS 14 and above works with Windows 8.
Cheers,
Joseph

----- Original Message -----
From: rhonda cruz <rhondaprincess@...
To: "The Jaws for Windows support list." <Jfw@...
Date sent: Tue, 30 Apr 2013 18:14:07 -0700
Subject: does jaws work with windows 8.

hello does jaws work with windows 8.
lab top.
my rehab. services.
will get me a computer for work & home use.
but i'm wondering if jaws will work with a new lab top with
windows 8.
i've been a long time jaws user.
for many years now.


from rhonda.


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Downloading and Saving attachments in Windows 8 Mail

Gilbert Neiva <gneiva@...>
 

Insert A doesn’t work. It just says “a” when I press insert A.



Gilbert Neiva


Sent from Windows Mail


From: Lauren
Sent: ‎May‎ ‎1‎, ‎2013 ‎7‎:‎00‎ ‎AM
To: 'The Jaws for Windows support list.'
Subject: RE: Downloading and Saving attachments in Windows 8 Mail


I don't know if this will work as I do not know Windows 8 mail, but am using windows 8 with Outlook 2013. Have you tried insert plus a and then arrowing left or right to find out the attachments? This seems to work for me.



Sincerely,

Lauren Sincerely,
Lauren

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Gilbert Neiva
Sent: Wednesday, May 1, 2013 1:21 AM
To: jfw@...
Subject: Downloading and Saving attachments in Windows 8 Mail

Does anyone know how to download and save attachments with Windows 8 Mail? I have some email with an attachment, but the attachment will not show. The attachment doesn’t show in the virtual window, and when I tab through the controls, Jaws does not announce the attachment anywhere through my tabbing cycle. When I tab, I here the list box containing the various folders, then the list box containing my messages, then new, then delete, then respond, then there is a button labeled with who the sender is, then another button with my name, and then the virtual window from which I can read the message, but no attachment window. What do I do?



Gilbert Neiva


Sent from Windows Mail
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20130430/e6665939/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20130501/37fdd61b/attachment.html>


Re: does jaws work with windows 8.

rodney jackson <jackson_mr@...>
 

Jen or anyone else,
Have you tried the classic start for windows 8, so it works like win7?
On one of my computers I have windows 8 pro 64 bit and I installed it,
however on that computer I am not using jaws, can not afford to put jaws on
all my machines.
So I am using NVDA on it and works well, was wondering if anyone has tried
it with jaws
Rodney

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Jennifer
Tissot
Sent: Wednesday, May 01, 2013 4:13 PM
To: The Jaws for Windows support list.
Subject: Re: does jaws work with windows 8.

yes, but only with the professional version, which his what I have. IT
is pretty proficient and there are a vfew shortcut keys to locate
foldres and such,j and unfortunately without the use of a mouse, much
tabbing involved in the menus. I'm used to it now and it's a little
slower but it does work. I'm learning the ropes on it, to. Win. 8 is
new to me..
Jen

On 4/30/13, Joseph Lee <joseph.lee22590@...> wrote:
Hi,
Yes, JAWS 14 and above works with Windows 8.
Cheers,
Joseph

----- Original Message -----
From: rhonda cruz <rhondaprincess@...
To: "The Jaws for Windows support list." <Jfw@...
Date sent: Tue, 30 Apr 2013 18:14:07 -0700
Subject: does jaws work with windows 8.

hello does jaws work with windows 8.
lab top.
my rehab. services.
will get me a computer for work & home use.
but i'm wondering if jaws will work with a new lab top with
windows 8.
i've been a long time jaws user.
for many years now.


from rhonda.


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Outlook 2010 reminders inaccessible with iCloud installed for i-phone synching?

George B
 

No, but you can do it by going to www.icloud.com and logging on and it is
all accessable there

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Brian
Anthony
Sent: Wednesday, May 01, 2013 14:14
To: jfw@...
Subject: Outlook 2010 reminders inaccessible with iCloud installed for
i-phone synching?

Dear List members,

Can anyone confirm if they have the 'dismiss', 'dismiss-all' and
'snooze'
buttons accessible within Outlook 2010 using JAWS 14 when they have the
Windows Apple I-Cloud software installed?

If I disable the 'iCloud' Outlook add-in, these 'reminder' buttons
become
accessible again by tabbing to them, but with the add-in enabled, those
buttons are not reachable by any tabbing with JAWS.

The i-Cloud synchronisation function of i-phone
reminders/contacts/appointments all seem to work fine, but
synchronising the
reminders becomes pointless if I can't access them on the Outlook
panel.



Surely I'm not the first trying to sync my i-phone to a Windows 7
system
using Outlook like this?



New list member, so sorry for duplicating this as my earlier posting I
suspect was a bit vague.



Regards,

Brian







-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-
jdh.com/attachments/20130501/4859b227/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: reading protected mode in word 2013?

Jennifer Tissot
 

HI, Lauren. I had the same issue with Word. 2010, which is what I'm
running. to permenantly turn off protected view for reading attached
files, go to the file menu (f10), then arrow over to the file ribbon.
Tab through until you hear "Microsoft Trust Center" and click on that.
Then you can tab till you get to protected view that way, and uncheck
the box labled "block atachments from the internet" and then save that
or "okay" it. I can't remember which. . That's it. I think I might
have missed onestep, but getting there isn't too hard once you know
what to look for. Write back if you can't figure this out.
Jen

On 5/1/13, Lauren <lotusrising@...> wrote:
I found it with the help of a Freedom Scientific rep, it's under word
options, and general and you have to uncheck a box.



Sincerely,

Lauren Sincerely,
Lauren

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Lisle, Ted
(CHFS DMS)
Sent: Wednesday, May 1, 2013 1:47 PM
To: The Jaws for Windows support list.
Subject: RE: reading protected mode in word 2013?

Nothing stupid about it, don't give that a thought. If the file is
protected, it's really easy. You an even unprotect from the Save command,
which may be easier for you than doing it the other way. Protecting a
document, or making it read-only, as opposed to encrypting it, is also
possible from the Info tab, but involves one or two more steps.

Ted

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Lauren
Sent: Wednesday, May 01, 2013 12:46 PM
To: 'The Jaws for Windows support list.'
Subject: RE: reading protected mode in word 2013?

A very stupid question, but do you do this Ted in a blank word document so
you can access future ones or with open attached file? I tired it with a
blank document and I don't find 'permissions'. Juan Pablo's suggestion did
not work either.

I feel like very small infant when I have been using PCs for over 20 years;
they should have it left it like Windows XP and Office 2003.



Sincerely,

Lauren Sincerely,
Lauren

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Lisle, Ted
(CHFS DMS)
Sent: Wednesday, May 1, 2013 12:36 PM
To: The Jaws for Windows support list.
Subject: RE: reading protected mode in word 2013?

Never mind the JAWS cursor. It's under the Info tab on the file menu,
about
3 items down. Look for "Permissions."

Ted

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Juan Pablo
Sent: Wednesday, May 01, 2013 12:18 PM
To: The Jaws for Windows support list.
Subject: Re: reading protected mode in word 2013?

I alreadi answered your question.

-----Original Message-----
From: Lauren
Sent: Wednesday, May 01, 2013 1:13 PM
To: 'The Jaws for Windows support list.'
Subject: RE: reading protected mode in word 2013?

Where is the word enable editing mode on the Jaws cursor? When I press jaws
cursor, it just says blank.

I also tried the trusted center in Word, pressed enter on it and found
protected view, but when I tab, I only hear Jaws say blank until it finally
says ok or if I press enter on protected view, it takes me back a step.

What am I doing wrong?


Sincerely,

Lauren Sincerely,
Lauren

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of MINH-TUYET
SNOW JONES
Sent: Wednesday, May 1, 2013 12:07 PM
To: The Jaws for Windows support list.
Subject: Re: reading protected mode in word 2013?

The way I enable edditing mode is to bring Jaws to PC, put the mouse right
on the word "enable edditing" and click the left mouse botton by cab +8 on
my labtop. I hope this also works for you. Smile. Snow

On 5/1/13, Lisle, Ted (CHFS DMS) <Ted.Lisle@...> wrote:
Quite true, but most of the protected files I receive are things I
actually need to edit, such as reports. The protection served its
purpose, keeping the document safe in transit, but now I need to alter
it anyway. I haven't tried this, but, should the need arise, Word
allows one to reprotect a completed file. Office 2010 offers the
easiest scheme since the old DOS +R and -R commands. Of course, the
simplicity of the operation means it's worthless for true security,
for
which one would need to impose a password.

Ted

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Adrian
Spratt
Sent: Tuesday, April 30, 2013 5:55 PM
To: 'The Jaws for Windows support list.'
Subject: RE: reading protected mode in word 2013?

The purpose of protected view is to guard against viruses. Once
protection has been eliminated by changing this setting, it would be
unwise even to try to open a protected file unless you are completely
confident of the source.


-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Lisa
Larges
Sent: Tuesday, April 30, 2013 5:49 PM
To: 'The Jaws for Windows support list.'
Subject: RE: reading protected mode in word 2013?

Ah, here we go, Lauren,
You have to do this from the MS Word side.
Same basic procedure:
Alt F to open the file menu
Arrow up to options
In the drop down menu, arrow down to trust center Tab to Trust center
settings You'll now be in another drop down list Arrow down to
protected view.
Now you can tab through and check and uncheck the options you like,
including open documents from email in protected view.
Of course this means that when you open a file in any other MS
program, such as Excel, you'll also have to change the settings in
that program if you want all files to open in an editable form.



-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Lauren
Sent: Tuesday, April 30, 2013 4:12 PM
To: 'The Jaws for Windows support list.'
Subject: RE: reading protected mode in word 2013?

Where is the security setting in outlook?

Sincerely,

Lauren Sincerely,
Lauren

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Lisa
Larges
Sent: Tuesday, April 30, 2013 4:16 PM
To: 'The Jaws for Windows support list.'
Subject: RE: reading protected mode in word 2013?

Hi Lauren,
There may be a simpler way, but I always use the JAWS cursor and go to
the top of the page, the second line down will contain the message
"this document was opened in protected view" I do a left mouse click
on the word "Enable" in "enable editing" which is at the end of that
line.
You could also change the security settings in Outlook so that
documents aren't automatically opened in protected view.
Off the top of my head I don't remember how to change these settings
in 2013.


-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Lauren
Sent: Tuesday, April 30, 2013 1:02 PM
To: The Jaws for Windows support list.
Subject: reading protected mode in word 2013?

Hi:



Does anyone know how I can change this reading protected mode, which I
get in attached files, in Word 2013 using Jaws 14 and Windows 8 into a
regular document so I can access it?



Sincerely,



Lauren Sincerely,

Lauren



-------------- next part -------------- An HTML attachment was
scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/
201304
30/7acf951c/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
MINH-TUYET SNOW JONES (Mrs)
3810 Kansas Street,
Bellingham, WA 98229-6030 USA
Tel: +1 360 566 2215
Mobile: +1 360 223 9432
Email: tranthiminhtuyet@...

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Outlook 2010 reminders inaccessible with iCloud installed for i-phone synching?

Brian Anthony <bri1729@...>
 

Dear List members,

Can anyone confirm if they have the 'dismiss', 'dismiss-all' and 'snooze'
buttons accessible within Outlook 2010 using JAWS 14 when they have the
Windows Apple I-Cloud software installed?

If I disable the 'iCloud' Outlook add-in, these 'reminder' buttons become
accessible again by tabbing to them, but with the add-in enabled, those
buttons are not reachable by any tabbing with JAWS.

The i-Cloud synchronisation function of i-phone
reminders/contacts/appointments all seem to work fine, but synchronising the
reminders becomes pointless if I can't access them on the Outlook panel.



Surely I'm not the first trying to sync my i-phone to a Windows 7 system
using Outlook like this?



New list member, so sorry for duplicating this as my earlier posting I
suspect was a bit vague.



Regards,

Brian







-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20130501/4859b227/attachment.html>


Re: does jaws work with windows 8.

Jennifer Tissot
 

yes, but only with the professional version, which his what I have. IT
is pretty proficient and there are a vfew shortcut keys to locate
foldres and such,j and unfortunately without the use of a mouse, much
tabbing involved in the menus. I'm used to it now and it's a little
slower but it does work. I'm learning the ropes on it, to. Win. 8 is
new to me..
Jen

On 4/30/13, Joseph Lee <joseph.lee22590@...> wrote:
Hi,
Yes, JAWS 14 and above works with Windows 8.
Cheers,
Joseph

----- Original Message -----
From: rhonda cruz <rhondaprincess@...
To: "The Jaws for Windows support list." <Jfw@...
Date sent: Tue, 30 Apr 2013 18:14:07 -0700
Subject: does jaws work with windows 8.

hello does jaws work with windows 8.
lab top.
my rehab. services.
will get me a computer for work & home use.
but i'm wondering if jaws will work with a new lab top with
windows 8.
i've been a long time jaws user.
for many years now.


from rhonda.


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Getting rid of braille labels

Brian and Denise Albriton <autoharp@...>
 

Pacmate 20 and jfw 14

On Wed, 1 May 2013, Milton Ota wrote:

Hello, Your message failed to tell us which braille dis[play you are using and version of JAWS.


Original message:
I think these are actually control labels like rded for read only edit.
I don't want these appearing on the braille display since I only have a
twenty cell display. Is there a way to get to have this information not
appear?

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Getting rid of braille labels

Nermin
 

Hi,

I think you can get rid of that by either defining the structured mode for your display, or switching to a different mode, such as line mode.

Regards,
Nermin

-----Ursprüngliche Nachricht-----


Re: Getting rid of braille labels

Milton Ota <mota1252@...>
 

Hello, Your message failed to tell us which braille dis[play you are using and version of JAWS.


Original message:

I think these are actually control labels like rded for read only edit.
I don't want these appearing on the braille display since I only have a
twenty cell display. Is there a way to get to have this information not
appear?

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Latest jaws with latest office with Apple iCloud, reminders not working?

Brian Anfthony <bri1729@...>
 

Has anybody any experience with navigation to the reminder control buttons not working if you have installed the windows Apple iCloud software to allow appointments, reminders, contacts to be synchronised to your iPhone?
This is with office 2010, on a Windows 7 system
All the synchronisation is working, but iPhone generated reminders coming onto the computer room leave me with no way of getting to the dismis, dismiss all, and snooze control buttons.
Surely I am not the first and only person to have this problem! I have fully reinstalled jaws, and office 2010, and it is the latest version of each application!
Kindest regards, Brian


Sent from Brian's iPhone


Getting rid of braille labels

Brian and Denise Albriton <autoharp@...>
 

I think these are actually control labels like rded for read only edit.
I don't want these appearing on the braille display since I only have a twenty cell display. Is there a way to get to have this information not appear?


Re: reading protected mode in word 2013?

Lauren
 

I found it with the help of a Freedom Scientific rep, it's under word
options, and general and you have to uncheck a box.



Sincerely,

Lauren Sincerely,
Lauren

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Lisle, Ted
(CHFS DMS)
Sent: Wednesday, May 1, 2013 1:47 PM
To: The Jaws for Windows support list.
Subject: RE: reading protected mode in word 2013?

Nothing stupid about it, don't give that a thought. If the file is
protected, it's really easy. You an even unprotect from the Save command,
which may be easier for you than doing it the other way. Protecting a
document, or making it read-only, as opposed to encrypting it, is also
possible from the Info tab, but involves one or two more steps.

Ted

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Lauren
Sent: Wednesday, May 01, 2013 12:46 PM
To: 'The Jaws for Windows support list.'
Subject: RE: reading protected mode in word 2013?

A very stupid question, but do you do this Ted in a blank word document so
you can access future ones or with open attached file? I tired it with a
blank document and I don't find 'permissions'. Juan Pablo's suggestion did
not work either.

I feel like very small infant when I have been using PCs for over 20 years;
they should have it left it like Windows XP and Office 2003.



Sincerely,

Lauren Sincerely,
Lauren

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Lisle, Ted
(CHFS DMS)
Sent: Wednesday, May 1, 2013 12:36 PM
To: The Jaws for Windows support list.
Subject: RE: reading protected mode in word 2013?

Never mind the JAWS cursor. It's under the Info tab on the file menu, about
3 items down. Look for "Permissions."

Ted

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Juan Pablo
Sent: Wednesday, May 01, 2013 12:18 PM
To: The Jaws for Windows support list.
Subject: Re: reading protected mode in word 2013?

I alreadi answered your question.

-----Original Message-----
From: Lauren
Sent: Wednesday, May 01, 2013 1:13 PM
To: 'The Jaws for Windows support list.'
Subject: RE: reading protected mode in word 2013?

Where is the word enable editing mode on the Jaws cursor? When I press jaws
cursor, it just says blank.

I also tried the trusted center in Word, pressed enter on it and found
protected view, but when I tab, I only hear Jaws say blank until it finally
says ok or if I press enter on protected view, it takes me back a step.

What am I doing wrong?


Sincerely,

Lauren Sincerely,
Lauren

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of MINH-TUYET
SNOW JONES
Sent: Wednesday, May 1, 2013 12:07 PM
To: The Jaws for Windows support list.
Subject: Re: reading protected mode in word 2013?

The way I enable edditing mode is to bring Jaws to PC, put the mouse right
on the word "enable edditing" and click the left mouse botton by cab +8 on
my labtop. I hope this also works for you. Smile. Snow

On 5/1/13, Lisle, Ted (CHFS DMS) <Ted.Lisle@...> wrote:
Quite true, but most of the protected files I receive are things I
actually need to edit, such as reports. The protection served its
purpose, keeping the document safe in transit, but now I need to alter
it anyway. I haven't tried this, but, should the need arise, Word
allows one to reprotect a completed file. Office 2010 offers the
easiest scheme since the old DOS +R and -R commands. Of course, the
simplicity of the operation means it's worthless for true security,
for
which one would need to impose a password.

Ted

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Adrian
Spratt
Sent: Tuesday, April 30, 2013 5:55 PM
To: 'The Jaws for Windows support list.'
Subject: RE: reading protected mode in word 2013?

The purpose of protected view is to guard against viruses. Once
protection has been eliminated by changing this setting, it would be
unwise even to try to open a protected file unless you are completely
confident of the source.


-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Lisa
Larges
Sent: Tuesday, April 30, 2013 5:49 PM
To: 'The Jaws for Windows support list.'
Subject: RE: reading protected mode in word 2013?

Ah, here we go, Lauren,
You have to do this from the MS Word side.
Same basic procedure:
Alt F to open the file menu
Arrow up to options
In the drop down menu, arrow down to trust center Tab to Trust center
settings You'll now be in another drop down list Arrow down to
protected view.
Now you can tab through and check and uncheck the options you like,
including open documents from email in protected view.
Of course this means that when you open a file in any other MS
program, such as Excel, you'll also have to change the settings in
that program if you want all files to open in an editable form.



-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Lauren
Sent: Tuesday, April 30, 2013 4:12 PM
To: 'The Jaws for Windows support list.'
Subject: RE: reading protected mode in word 2013?

Where is the security setting in outlook?

Sincerely,

Lauren Sincerely,
Lauren

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Lisa
Larges
Sent: Tuesday, April 30, 2013 4:16 PM
To: 'The Jaws for Windows support list.'
Subject: RE: reading protected mode in word 2013?

Hi Lauren,
There may be a simpler way, but I always use the JAWS cursor and go to
the top of the page, the second line down will contain the message
"this document was opened in protected view" I do a left mouse click
on the word "Enable" in "enable editing" which is at the end of that line.
You could also change the security settings in Outlook so that
documents aren't automatically opened in protected view.
Off the top of my head I don't remember how to change these settings
in 2013.


-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Lauren
Sent: Tuesday, April 30, 2013 1:02 PM
To: The Jaws for Windows support list.
Subject: reading protected mode in word 2013?

Hi:



Does anyone know how I can change this reading protected mode, which I
get in attached files, in Word 2013 using Jaws 14 and Windows 8 into a
regular document so I can access it?



Sincerely,



Lauren Sincerely,

Lauren



-------------- next part -------------- An HTML attachment was
scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/
201304
30/7acf951c/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
MINH-TUYET SNOW JONES (Mrs)
3810 Kansas Street,
Bellingham, WA 98229-6030 USA
Tel: +1 360 566 2215
Mobile: +1 360 223 9432
Email: tranthiminhtuyet@...

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

86221 - 86240 of 102559