Date   

Re: JAWS won't verbalize letters with accents and other symbols

Dave...
 

Adrian,

I know this doesn't help, but in character-by-character movement, I do hear
the letter properly pronounced. I wonder if you need to change your
punctuation level, or perhaps enable something else in the text dialog in
the settings center?




Dave Carlson
Tastefully composed and launched near the Pacific Ocean using a Dell
Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit

----- Original Message -----
From: "Adrian Spratt" <Adrian@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Monday, February 04, 2013 06:11
Subject: JAWS won't verbalize letters with accents and other symbols


Hi. Using JAWS 14 and Windows 7, I find that JAWS won't read letters with
accents and other symbols. For example, it won't tell me that the last
character of this word is e acute:



Engagé



On my system, JAWS leaves that last character silent.



When I had JAWS 13 and XP, JAWS would tell me that this symbol is e acute.



I know JAWS doesn't pronounce most words with symbols properly when reading
by word, line, etc. That's another issue.



Any ideas how I can get JAWS to speak these characters?

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20130204/7b4469fb/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Shortcut for Jaws with sound card?

John Gurd
 

Well, the reason for asking is that I just installed a high-end second
internal card for music and entertainment. Normally I have it on analogue
where the sound gets played through a transmitter to various radio speakers
throughout the house. For intense listening I switch to SPDIF out on the
surround system. When experimenting with driver settings on the second card
I have sometimes temporarily lost sound from JFW. I thought it would be good
to have a backup way of launching Jaws so that it reverts back to the
on-board sound card. It would give me a guaranteed way of getting out of
trouble if I do things to my other card's driver it doesn't like.

I am running Windows 7. I think there used to be a way of doing something
like this in Windows XP? I would be grateful if anyone knows how this could
be done.

Thanks.

John

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Bill White
Sent: 02 February 2013 17:55
To: The Jaws for Windows support list.
Subject: Re: Shortcut for Jaws with sound card?

I believe the reason John wanted a shortcut for JAWS to use the sound card
is that he wanted to have JAWS use the external sound card for music, and to
use the internal sound card with JAWS for other applications. If it were
possible to toggle use of the sound cards by JAWS, this would be very
convenient, and I would be interested in it as well.
Bill White billwhite92701@...
----- Original Message -----
From: "Peter Tighe" <pstighe@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Saturday, February 02, 2013 9:20 AM
Subject: Re: Shortcut for Jaws with sound card?



John,

I don't think a short cut is really needed!

I have two sound cards, one for default which I primarily use for
music and the other which I use exclusively with Jaws.

You can set jaws to use a specific sound card, and leave all other
programs to use the default. This means that you can record music
without the Jaws voice interfeering.

To change Jaws to play through your nondefault sound card do the
following:
From the jaws windowpressalt-u.

arrow down to sound cardand press enter.

You will see a list of all your sound cards. Some may be nentioned twice.

Arrow down to the non default card that says speakers and press enter.
This setting should holde for ever.

Peter


Sent: Saturday, February 02, 2013 7:56 AM
To: "jfw World List" <jfw@...>
Subject: Shortcut for Jaws with sound card?

Is it possible to set up a shortcut to make Jaws load and run with a
particular sound card that is not the default? If it is, I would be
interested to know how to do it if someone can help.



If it isn't, then could anyone tell me how to make a batch file that
will do this?



Thanks in advance.



John



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201302
02/1ed8dfab/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


__________ Information from ESET NOD32 Antivirus, version of virus
signature database 7962 (20130202) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus signature
database 7962 (20130202) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


JAWS won't verbalize letters with accents and other symbols

Adrian Spratt
 

Hi. Using JAWS 14 and Windows 7, I find that JAWS won’t read letters with
accents and other symbols. For example, it won’t tell me that the last
character of this word is e acute:



Engagé



On my system, JAWS leaves that last character silent.



When I had JAWS 13 and XP, JAWS would tell me that this symbol is e acute.



I know JAWS doesn’t pronounce most words with symbols properly when reading
by word, line, etc. That’s another issue.



Any ideas how I can get JAWS to speak these characters?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20130204/7b4469fb/attachment.html>


Re: Blind Tunes for iTunes 11 Audio Demo

Dave...
 

Doris,

No longer. There is a small charge to help defray all the costs. I think $6
is the amount.

Dave Carlson
Tastefully composed and launched near the Pacific Ocean using a Dell
Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit

----- Original Message -----
From: "Doris and Chris" <chipmunks@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Monday, February 04, 2013 02:16
Subject: RE: Blind Tunes for iTunes 11 Audio Demo


I thought these blindtunes scripts were supposed to be free?

Doris



At 09:34 PM 2/3/2013 -0800, you wrote:
John,
I downloaded Itunes followed by your blind tunes software. How can I tell
if
the blind tunes software was actually downloaded successfully? I paid for
it
and put in the registration code but I can't tell if it actually
downloaded.
Thanks for any help

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of John Martyn
Sent: Sunday, January 13, 2013 6:54 AM
To: 'The Jaws for Windows support list.'; blindtunesbeta@...
Subject: Blind Tunes for iTunes 11 Audio Demo

For those interested, I have created an audio demo of the scripts in
action.
It speaks for itself.

http://www.BlindTunes.net/demo.mp3

Cheers!

John Martyn

DoItBlind.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201301
13/31c53ecc/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1430 / Virus Database: 2638/5529 - Release Date: 01/12/13


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

Adrian Spratt
 

Tom,

Thanks for following up. Not to belabor the idea, which was brought up by
John Falter, but you might want to try one more time. All you're saying to
JAWS is, when you see this set of characters, read them this new way rather
than the way you normally do. Where the characters are located shouldn't
matter. I find that when a dictionary entry hasn't worked for me, it's
because there's a non-character symbol in the string that I've copied over,
such as a return key. If you either manually type the characters into the
"Add" field of the dictionary or strip out any codes, I believe you'll
succeed.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Tom Behler
Sent: Monday, February 04, 2013 6:48 AM
To: The Jaws for Windows support list.
Subject: Re: Changing labels in form fields?

Adrian:

Unfortunately, I tried this with my application of interest, and it did not
work. I think it's because I can't get to the text of the label I want to
change. It seems like the label itself is outside of the Window where I
enter the information.

Thanks for the nice suggestion, though, and I am sure it will come in handy
for other applications later down the road.

Dr. Tom Behler from Michigan


----- Original Message -----
From: "Adrian Spratt" <Adrian@...>
To: "'The Jaws for Windows support list.'" <jfw@...>
Sent: Sunday, February 03, 2013 5:08 PM
Subject: RE: Changing labels in form fields?


1. Select and copy the text of one of the labels you wish to change.

2. Ensure focus stays on the application.

3. Open the JAWS dictionary with JAWS key+d and press enter.

4. Press JAWS key+numpad 8 and you'll hear "Add." Press spacebar.

5. Tab once and type in the text with which you wish to replace the label
text.

6. Press enter, then control-s for save, then alt-F4 to exit the
dictionary.

If that works, you can change the other labels without exiting the
dictionary.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Tom Behler
Sent: Sunday, February 03, 2013 4:41 PM
To: The Jaws for Windows support list.
Subject: Re: Changing labels in form fields?

Maybe, but I'm not sure how to do that.

Tom Behler

----- Original Message -----
From: "john.falter" <john.falter@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, February 03, 2013 3:07 PM
Subject: Re: Changing labels in form fields?


Could you use the JAWS dictionary to change the form fields?

----- Original Message -----
From: "Tom Behler" <tombehler@...>
To: "Jaws users e-mail list" <jfw@...>
Sent: Sunday, February 03, 2013 1:40 PM
Subject: Fw: Changing labels in form fields?


I'm not sure if this made it to the list earlier today, so I'm
re-posting
just to be sure it gets through.

See below


----- Original Message -----
From: "Tom Behler" <tombehler@...>
To: "Jaws users e-mail list" <jfw@...>
Sent: Sunday, February 03, 2013 8:59 AM
Subject: Changing labels in form fields?


Hi, everyone.

I am working with an amateur radio logging software program, and have
what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit
cumbersome, and I want to customize them and make them shorter and
easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to
come up with a clear solution.

Dr. Tom Behler from Michigan

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

Tom Behler
 

Adrian:

Unfortunately, I tried this with my application of interest, and it did not work. I think it's because I can't get to the text of the label I want to change. It seems like the label itself is outside of the Window where I enter the information.

Thanks for the nice suggestion, though, and I am sure it will come in handy for other applications later down the road.

Dr. Tom Behler from Michigan

----- Original Message -----
From: "Adrian Spratt" <Adrian@...>
To: "'The Jaws for Windows support list.'" <jfw@...>
Sent: Sunday, February 03, 2013 5:08 PM
Subject: RE: Changing labels in form fields?


1. Select and copy the text of one of the labels you wish to change.

2. Ensure focus stays on the application.

3. Open the JAWS dictionary with JAWS key+d and press enter.

4. Press JAWS key+numpad 8 and you'll hear "Add." Press spacebar.

5. Tab once and type in the text with which you wish to replace the label
text.

6. Press enter, then control-s for save, then alt-F4 to exit the dictionary.

If that works, you can change the other labels without exiting the
dictionary.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Tom Behler
Sent: Sunday, February 03, 2013 4:41 PM
To: The Jaws for Windows support list.
Subject: Re: Changing labels in form fields?

Maybe, but I'm not sure how to do that.

Tom Behler

----- Original Message -----
From: "john.falter" <john.falter@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, February 03, 2013 3:07 PM
Subject: Re: Changing labels in form fields?


Could you use the JAWS dictionary to change the form fields?

----- Original Message -----
From: "Tom Behler" <tombehler@...>
To: "Jaws users e-mail list" <jfw@...>
Sent: Sunday, February 03, 2013 1:40 PM
Subject: Fw: Changing labels in form fields?


I'm not sure if this made it to the list earlier today, so I'm re-posting
just to be sure it gets through.

See below


----- Original Message -----
From: "Tom Behler" <tombehler@...>
To: "Jaws users e-mail list" <jfw@...>
Sent: Sunday, February 03, 2013 8:59 AM
Subject: Changing labels in form fields?


Hi, everyone.

I am working with an amateur radio logging software program, and have
what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit
cumbersome, and I want to customize them and make them shorter and
easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to
come up with a clear solution.

Dr. Tom Behler from Michigan

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Blind Tunes for iTunes 11 Audio Demo

Doris and Chris
 

I thought these blindtunes scripts were supposed to be free?

Doris

At 09:34 PM 2/3/2013 -0800, you wrote:
John,
I downloaded Itunes followed by your blind tunes software. How can I tell if
the blind tunes software was actually downloaded successfully? I paid for it
and put in the registration code but I can't tell if it actually downloaded.
Thanks for any help

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of John Martyn
Sent: Sunday, January 13, 2013 6:54 AM
To: 'The Jaws for Windows support list.'; blindtunesbeta@...
Subject: Blind Tunes for iTunes 11 Audio Demo

For those interested, I have created an audio demo of the scripts in action.
It speaks for itself.

http://www.BlindTunes.net/demo.mp3

Cheers!

John Martyn

DoItBlind.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201301
13/31c53ecc/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1430 / Virus Database: 2638/5529 - Release Date: 01/12/13


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Blind Tunes for iTunes 11 Audio Demo

Drew Hunthausen
 

John,
I downloaded Itunes followed by your blind tunes software. How can I tell if
the blind tunes software was actually downloaded successfully? I paid for it
and put in the registration code but I can't tell if it actually downloaded.
Thanks for any help

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of John Martyn
Sent: Sunday, January 13, 2013 6:54 AM
To: 'The Jaws for Windows support list.'; blindtunesbeta@...
Subject: Blind Tunes for iTunes 11 Audio Demo

For those interested, I have created an audio demo of the scripts in action.
It speaks for itself.

http://www.BlindTunes.net/demo.mp3

Cheers!

John Martyn

DoItBlind.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201301
13/31c53ecc/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1430 / Virus Database: 2638/5529 - Release Date: 01/12/13


Re: Changing labels in form fields?

Tom Behler
 

Thanks, Adrian.

I'll give this a try.

Tom Behler

----- Original Message -----
From: "Adrian Spratt" <Adrian@...>
To: "'The Jaws for Windows support list.'" <jfw@...>
Sent: Sunday, February 03, 2013 5:08 PM
Subject: RE: Changing labels in form fields?


1. Select and copy the text of one of the labels you wish to change.

2. Ensure focus stays on the application.

3. Open the JAWS dictionary with JAWS key+d and press enter.

4. Press JAWS key+numpad 8 and you'll hear "Add." Press spacebar.

5. Tab once and type in the text with which you wish to replace the label
text.

6. Press enter, then control-s for save, then alt-F4 to exit the dictionary.

If that works, you can change the other labels without exiting the
dictionary.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Tom Behler
Sent: Sunday, February 03, 2013 4:41 PM
To: The Jaws for Windows support list.
Subject: Re: Changing labels in form fields?

Maybe, but I'm not sure how to do that.

Tom Behler

----- Original Message -----
From: "john.falter" <john.falter@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, February 03, 2013 3:07 PM
Subject: Re: Changing labels in form fields?


Could you use the JAWS dictionary to change the form fields?

----- Original Message -----
From: "Tom Behler" <tombehler@...>
To: "Jaws users e-mail list" <jfw@...>
Sent: Sunday, February 03, 2013 1:40 PM
Subject: Fw: Changing labels in form fields?


I'm not sure if this made it to the list earlier today, so I'm re-posting
just to be sure it gets through.

See below


----- Original Message -----
From: "Tom Behler" <tombehler@...>
To: "Jaws users e-mail list" <jfw@...>
Sent: Sunday, February 03, 2013 8:59 AM
Subject: Changing labels in form fields?


Hi, everyone.

I am working with an amateur radio logging software program, and have
what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit
cumbersome, and I want to customize them and make them shorter and
easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to
come up with a clear solution.

Dr. Tom Behler from Michigan

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Lists in Outlook 2010

Adrian Spratt
 

Kimsan,

I have no idea why, but this time what you said got through to me and I
found the list. Thank you for persisting.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Kimsan
Sent: Sunday, February 03, 2013 7:47 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Hmmm,
When I click on manage rules and alerts, I land on the new rule button and
then I tab until I hear the move down button, press spacebar and all of my
rules appear and hit delete on the one I am wanting to remove and click
apply and ok.

Just in case I am not missing something, you are wanting to delete a rule
that you mistakenly created?

Kimsan Song
kimsansong@...


-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 3:51 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Kimsan, I appreciate this, but it idn't work for me. When I click on manage
rules, the only item that comes up is "New rule..." If I click on it, I go
where I know I don't want to. If I don't press enter, I can't arrow my way
out of it. So that leaves tabbing. Here I land on a list, but it's a series
of potential operations for what I assume is supposed to be a selected rule.
Nowhere am I finding that rules list, except in the "Run Rules" section.

Can you see anything I might be overlooking in my attempt to describe what
I've tried?

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Kimsan
Sent: Sunday, February 03, 2013 6:38 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Adrian,
If you tab after clicking on manage rules and alerts, in the dialog, there
is a move down button, press spacebar on it and the rules will appear.


Kimsan Song
kimsansong@...


-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 2:19 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Dani, that did the trick. Thanks.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Dani L Pagador
Sent: Sunday, February 03, 2013 3:27 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Hi, Adrian.
In the second situation, when you do your search for mail and the "read now"
button comes up, do an F6 to get to the search results. You should then be
able to arrow through the messages, and hit enter on the one you want to
read.
HTH,
Dani

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 10:08 AM
To: The Jaws for Windows support list.
Subject: Lists in Outlook 2010

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201302
03/c82b3ff4/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Lists in Outlook 2010

Kimsan <kimsansong@...>
 

Hmmm,
When I click on manage rules and alerts, I land on the new rule button and
then I tab until I hear the move down button, press spacebar and all of my
rules appear and hit delete on the one I am wanting to remove and click
apply and ok.

Just in case I am not missing something, you are wanting to delete a rule
that you mistakenly created?

Kimsan Song
kimsansong@...

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 3:51 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Kimsan, I appreciate this, but it idn't work for me. When I click on manage
rules, the only item that comes up is "New rule..." If I click on it, I go
where I know I don't want to. If I don't press enter, I can't arrow my way
out of it. So that leaves tabbing. Here I land on a list, but it's a series
of potential operations for what I assume is supposed to be a selected rule.
Nowhere am I finding that rules list, except in the "Run Rules" section.

Can you see anything I might be overlooking in my attempt to describe what
I've tried?

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Kimsan
Sent: Sunday, February 03, 2013 6:38 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Adrian,
If you tab after clicking on manage rules and alerts, in the dialog, there
is a move down button, press spacebar on it and the rules will appear.


Kimsan Song
kimsansong@...


-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 2:19 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Dani, that did the trick. Thanks.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Dani L Pagador
Sent: Sunday, February 03, 2013 3:27 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Hi, Adrian.
In the second situation, when you do your search for mail and the "read now"
button comes up, do an F6 to get to the search results. You should then be
able to arrow through the messages, and hit enter on the one you want to
read.
HTH,
Dani

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 10:08 AM
To: The Jaws for Windows support list.
Subject: Lists in Outlook 2010

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201302
03/c82b3ff4/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Lists in Outlook 2010

Adrian Spratt
 

Kimsan, I appreciate this, but it idn't work for me. When I click on manage
rules, the only item that comes up is "New rule..." If I click on it, I go
where I know I don't want to. If I don't press enter, I can't arrow my way
out of it. So that leaves tabbing. Here I land on a list, but it's a series
of potential operations for what I assume is supposed to be a selected rule.
Nowhere am I finding that rules list, except in the "Run Rules" section.

Can you see anything I might be overlooking in my attempt to describe what
I've tried?

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Kimsan
Sent: Sunday, February 03, 2013 6:38 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Adrian,
If you tab after clicking on manage rules and alerts, in the dialog, there
is a move down button, press spacebar on it and the rules will appear.


Kimsan Song
kimsansong@...


-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 2:19 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Dani, that did the trick. Thanks.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Dani L Pagador
Sent: Sunday, February 03, 2013 3:27 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Hi, Adrian.
In the second situation, when you do your search for mail and the "read now"
button comes up, do an F6 to get to the search results. You should then be
able to arrow through the messages, and hit enter on the one you want to
read.
HTH,
Dani

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 10:08 AM
To: The Jaws for Windows support list.
Subject: Lists in Outlook 2010

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201302
03/c82b3ff4/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Lists in Outlook 2010

Kimsan <kimsansong@...>
 

Adrian,
If you tab after clicking on manage rules and alerts, in the dialog, there
is a move down button, press spacebar on it and the rules will appear.


Kimsan Song
kimsansong@...

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 2:19 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Dani, that did the trick. Thanks.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Dani L Pagador
Sent: Sunday, February 03, 2013 3:27 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Hi, Adrian.
In the second situation, when you do your search for mail and the "read now"
button comes up, do an F6 to get to the search results. You should then be
able to arrow through the messages, and hit enter on the one you want to
read.
HTH,
Dani

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 10:08 AM
To: The Jaws for Windows support list.
Subject: Lists in Outlook 2010

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201302
03/c82b3ff4/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Lists in Outlook 2010

Adrian Spratt
 

Dani, that did the trick. Thanks.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Dani L Pagador
Sent: Sunday, February 03, 2013 3:27 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Hi, Adrian.
In the second situation, when you do your search for mail and the "read now"
button comes up, do an F6 to get to the search results. You should then be
able to arrow through the messages, and hit enter on the one you want to
read.
HTH,
Dani

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 10:08 AM
To: The Jaws for Windows support list.
Subject: Lists in Outlook 2010

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201302
03/c82b3ff4/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

Adrian Spratt
 

1. Select and copy the text of one of the labels you wish to change.

2. Ensure focus stays on the application.

3. Open the JAWS dictionary with JAWS key+d and press enter.

4. Press JAWS key+numpad 8 and you'll hear "Add." Press spacebar.

5. Tab once and type in the text with which you wish to replace the label
text.

6. Press enter, then control-s for save, then alt-F4 to exit the dictionary.

If that works, you can change the other labels without exiting the
dictionary.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Tom Behler
Sent: Sunday, February 03, 2013 4:41 PM
To: The Jaws for Windows support list.
Subject: Re: Changing labels in form fields?

Maybe, but I'm not sure how to do that.

Tom Behler

----- Original Message -----
From: "john.falter" <john.falter@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, February 03, 2013 3:07 PM
Subject: Re: Changing labels in form fields?


Could you use the JAWS dictionary to change the form fields?

----- Original Message -----
From: "Tom Behler" <tombehler@...>
To: "Jaws users e-mail list" <jfw@...>
Sent: Sunday, February 03, 2013 1:40 PM
Subject: Fw: Changing labels in form fields?


I'm not sure if this made it to the list earlier today, so I'm re-posting
just to be sure it gets through.

See below


----- Original Message -----
From: "Tom Behler" <tombehler@...>
To: "Jaws users e-mail list" <jfw@...>
Sent: Sunday, February 03, 2013 8:59 AM
Subject: Changing labels in form fields?


Hi, everyone.

I am working with an amateur radio logging software program, and have
what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit
cumbersome, and I want to customize them and make them shorter and
easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to
come up with a clear solution.

Dr. Tom Behler from Michigan

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

Tom Behler
 

Maybe, but I'm not sure how to do that.

Tom Behler

----- Original Message -----
From: "john.falter" <john.falter@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, February 03, 2013 3:07 PM
Subject: Re: Changing labels in form fields?


Could you use the JAWS dictionary to change the form fields?

----- Original Message -----
From: "Tom Behler" <tombehler@...>
To: "Jaws users e-mail list" <jfw@...>
Sent: Sunday, February 03, 2013 1:40 PM
Subject: Fw: Changing labels in form fields?


I'm not sure if this made it to the list earlier today, so I'm re-posting just to be sure it gets through.

See below


----- Original Message -----
From: "Tom Behler" <tombehler@...>
To: "Jaws users e-mail list" <jfw@...>
Sent: Sunday, February 03, 2013 8:59 AM
Subject: Changing labels in form fields?


Hi, everyone.

I am working with an amateur radio logging software program, and have what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit cumbersome, and I want to customize them and make them shorter and easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to come up with a clear solution.

Dr. Tom Behler from Michigan

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

Tom Behler
 

That could very well be.

I may have to ask the designer of the software.

Tom Behler

----- Original Message -----
From: "George B" <gbmagoo@...>
To: "'The Jaws for Windows support list.'" <jfw@...>
Sent: Sunday, February 03, 2013 3:06 PM
Subject: RE: Changing labels in form fields?


Well tom maybe the fields are locked and you can not change them

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Tom
Behler
Sent: Sunday, February 03, 2013 11:28
To: The Jaws for Windows support list.
Subject: Re: Changing labels in form fields?
Ann:
I tried that, but had no luck.
I found those instructions in the Jaws help files as well.
Tom Behler
----- Original Message -----
From: "Ann Byrne" <annakb@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, February 03, 2013 1:43 PM
Subject: Re: Changing labels in form fields?

In Surf's Up, the instruction is for labeling forms in Html documents
such as web pages, so I don't know if that would work for your
program. It says to press insert+control+tab, type in the name you
want, and press enter.

Good luck!
At 07:59 AM 2/3/2013, you wrote:
Hi, everyone.

I am working with an amateur radio logging software program, and
have what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit
cumbersome, and I want to customize them and make them shorter and
easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet
to come up with a clear solution.

Dr. Tom Behler from Michigan


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Lists in Outlook 2010

Dani Pagador
 

Hi, Adrian.
To add to my previous reply, I just checked, and F6 will toggle you between
the results window and the search dialog. So you could do a search, toggle
with F6 to look at the results, then F6 back to the dialog to clear the
field and do another search.
HTH,
Dani

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 10:08 AM
To: The Jaws for Windows support list.
Subject: Lists in Outlook 2010

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201302
03/c82b3ff4/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Lists in Outlook 2010

Dani Pagador
 

Hi, Adrian.
In the second situation, when you do your search for mail and the "read now"
button comes up, do an F6 to get to the search results. You should then be
able to arrow through the messages, and hit enter on the one you want to
read.
HTH,
Dani

-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 10:08 AM
To: The Jaws for Windows support list.
Subject: Lists in Outlook 2010

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201302
03/c82b3ff4/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Lists in Outlook 2010

Adrian Spratt
 

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20130203/c82b3ff4/attachment.html>

87861 - 87880 of 102613