Date   

Re: Blind Tunes for iTunes 11 Audio Demo

Doris and Chris
 

I thought these blindtunes scripts were supposed to be free?

Doris

At 09:34 PM 2/3/2013 -0800, you wrote:
John,
I downloaded Itunes followed by your blind tunes software. How can I tell if
the blind tunes software was actually downloaded successfully? I paid for it
and put in the registration code but I can't tell if it actually downloaded.
Thanks for any help

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of John Martyn
Sent: Sunday, January 13, 2013 6:54 AM
To: 'The Jaws for Windows support list.'; blindtunesbeta@freelists.org
Subject: Blind Tunes for iTunes 11 Audio Demo

For those interested, I have created an audio demo of the scripts in action.
It speaks for itself.

http://www.BlindTunes.net/demo.mp3

Cheers!

John Martyn

DoItBlind.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201301
13/31c53ecc/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1430 / Virus Database: 2638/5529 - Release Date: 01/12/13


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Blind Tunes for iTunes 11 Audio Demo

Drew Hunthausen
 

John,
I downloaded Itunes followed by your blind tunes software. How can I tell if
the blind tunes software was actually downloaded successfully? I paid for it
and put in the registration code but I can't tell if it actually downloaded.
Thanks for any help

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of John Martyn
Sent: Sunday, January 13, 2013 6:54 AM
To: 'The Jaws for Windows support list.'; blindtunesbeta@freelists.org
Subject: Blind Tunes for iTunes 11 Audio Demo

For those interested, I have created an audio demo of the scripts in action.
It speaks for itself.

http://www.BlindTunes.net/demo.mp3

Cheers!

John Martyn

DoItBlind.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201301
13/31c53ecc/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1430 / Virus Database: 2638/5529 - Release Date: 01/12/13


Re: Changing labels in form fields?

Tom Behler
 

Thanks, Adrian.

I'll give this a try.

Tom Behler

----- Original Message -----
From: "Adrian Spratt" <Adrian@AdrianSpratt.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 5:08 PM
Subject: RE: Changing labels in form fields?


1. Select and copy the text of one of the labels you wish to change.

2. Ensure focus stays on the application.

3. Open the JAWS dictionary with JAWS key+d and press enter.

4. Press JAWS key+numpad 8 and you'll hear "Add." Press spacebar.

5. Tab once and type in the text with which you wish to replace the label
text.

6. Press enter, then control-s for save, then alt-F4 to exit the dictionary.

If that works, you can change the other labels without exiting the
dictionary.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Tom Behler
Sent: Sunday, February 03, 2013 4:41 PM
To: The Jaws for Windows support list.
Subject: Re: Changing labels in form fields?

Maybe, but I'm not sure how to do that.

Tom Behler

----- Original Message -----
From: "john.falter" <john.falter@verizon.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 3:07 PM
Subject: Re: Changing labels in form fields?


Could you use the JAWS dictionary to change the form fields?

----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 1:40 PM
Subject: Fw: Changing labels in form fields?


I'm not sure if this made it to the list earlier today, so I'm re-posting
just to be sure it gets through.

See below


----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 8:59 AM
Subject: Changing labels in form fields?


Hi, everyone.

I am working with an amateur radio logging software program, and have
what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit
cumbersome, and I want to customize them and make them shorter and
easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to
come up with a clear solution.

Dr. Tom Behler from Michigan

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Lists in Outlook 2010

Adrian Spratt
 

Kimsan,

I have no idea why, but this time what you said got through to me and I
found the list. Thank you for persisting.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Kimsan
Sent: Sunday, February 03, 2013 7:47 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Hmmm,
When I click on manage rules and alerts, I land on the new rule button and
then I tab until I hear the move down button, press spacebar and all of my
rules appear and hit delete on the one I am wanting to remove and click
apply and ok.

Just in case I am not missing something, you are wanting to delete a rule
that you mistakenly created?

Kimsan Song
kimsansong@aol.com


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 3:51 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Kimsan, I appreciate this, but it idn't work for me. When I click on manage
rules, the only item that comes up is "New rule..." If I click on it, I go
where I know I don't want to. If I don't press enter, I can't arrow my way
out of it. So that leaves tabbing. Here I land on a list, but it's a series
of potential operations for what I assume is supposed to be a selected rule.
Nowhere am I finding that rules list, except in the "Run Rules" section.

Can you see anything I might be overlooking in my attempt to describe what
I've tried?

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Kimsan
Sent: Sunday, February 03, 2013 6:38 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Adrian,
If you tab after clicking on manage rules and alerts, in the dialog, there
is a move down button, press spacebar on it and the rules will appear.


Kimsan Song
kimsansong@aol.com


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 2:19 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Dani, that did the trick. Thanks.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Dani L Pagador
Sent: Sunday, February 03, 2013 3:27 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Hi, Adrian.
In the second situation, when you do your search for mail and the "read now"
button comes up, do an F6 to get to the search results. You should then be
able to arrow through the messages, and hit enter on the one you want to
read.
HTH,
Dani

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 10:08 AM
To: The Jaws for Windows support list.
Subject: Lists in Outlook 2010

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201302
03/c82b3ff4/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Lists in Outlook 2010

Kimsan <kimsansong@...>
 

Hmmm,
When I click on manage rules and alerts, I land on the new rule button and
then I tab until I hear the move down button, press spacebar and all of my
rules appear and hit delete on the one I am wanting to remove and click
apply and ok.

Just in case I am not missing something, you are wanting to delete a rule
that you mistakenly created?

Kimsan Song
kimsansong@aol.com

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 3:51 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Kimsan, I appreciate this, but it idn't work for me. When I click on manage
rules, the only item that comes up is "New rule..." If I click on it, I go
where I know I don't want to. If I don't press enter, I can't arrow my way
out of it. So that leaves tabbing. Here I land on a list, but it's a series
of potential operations for what I assume is supposed to be a selected rule.
Nowhere am I finding that rules list, except in the "Run Rules" section.

Can you see anything I might be overlooking in my attempt to describe what
I've tried?

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Kimsan
Sent: Sunday, February 03, 2013 6:38 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Adrian,
If you tab after clicking on manage rules and alerts, in the dialog, there
is a move down button, press spacebar on it and the rules will appear.


Kimsan Song
kimsansong@aol.com


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 2:19 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Dani, that did the trick. Thanks.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Dani L Pagador
Sent: Sunday, February 03, 2013 3:27 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Hi, Adrian.
In the second situation, when you do your search for mail and the "read now"
button comes up, do an F6 to get to the search results. You should then be
able to arrow through the messages, and hit enter on the one you want to
read.
HTH,
Dani

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 10:08 AM
To: The Jaws for Windows support list.
Subject: Lists in Outlook 2010

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201302
03/c82b3ff4/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Lists in Outlook 2010

Adrian Spratt
 

Kimsan, I appreciate this, but it idn't work for me. When I click on manage
rules, the only item that comes up is "New rule..." If I click on it, I go
where I know I don't want to. If I don't press enter, I can't arrow my way
out of it. So that leaves tabbing. Here I land on a list, but it's a series
of potential operations for what I assume is supposed to be a selected rule.
Nowhere am I finding that rules list, except in the "Run Rules" section.

Can you see anything I might be overlooking in my attempt to describe what
I've tried?

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Kimsan
Sent: Sunday, February 03, 2013 6:38 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Adrian,
If you tab after clicking on manage rules and alerts, in the dialog, there
is a move down button, press spacebar on it and the rules will appear.


Kimsan Song
kimsansong@aol.com


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 2:19 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Dani, that did the trick. Thanks.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Dani L Pagador
Sent: Sunday, February 03, 2013 3:27 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Hi, Adrian.
In the second situation, when you do your search for mail and the "read now"
button comes up, do an F6 to get to the search results. You should then be
able to arrow through the messages, and hit enter on the one you want to
read.
HTH,
Dani

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 10:08 AM
To: The Jaws for Windows support list.
Subject: Lists in Outlook 2010

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201302
03/c82b3ff4/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Lists in Outlook 2010

Kimsan <kimsansong@...>
 

Adrian,
If you tab after clicking on manage rules and alerts, in the dialog, there
is a move down button, press spacebar on it and the rules will appear.


Kimsan Song
kimsansong@aol.com

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 2:19 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Dani, that did the trick. Thanks.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Dani L Pagador
Sent: Sunday, February 03, 2013 3:27 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Hi, Adrian.
In the second situation, when you do your search for mail and the "read now"
button comes up, do an F6 to get to the search results. You should then be
able to arrow through the messages, and hit enter on the one you want to
read.
HTH,
Dani

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 10:08 AM
To: The Jaws for Windows support list.
Subject: Lists in Outlook 2010

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201302
03/c82b3ff4/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Lists in Outlook 2010

Adrian Spratt
 

Dani, that did the trick. Thanks.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Dani L Pagador
Sent: Sunday, February 03, 2013 3:27 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Hi, Adrian.
In the second situation, when you do your search for mail and the "read now"
button comes up, do an F6 to get to the search results. You should then be
able to arrow through the messages, and hit enter on the one you want to
read.
HTH,
Dani

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 10:08 AM
To: The Jaws for Windows support list.
Subject: Lists in Outlook 2010

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201302
03/c82b3ff4/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

Adrian Spratt
 

1. Select and copy the text of one of the labels you wish to change.

2. Ensure focus stays on the application.

3. Open the JAWS dictionary with JAWS key+d and press enter.

4. Press JAWS key+numpad 8 and you'll hear "Add." Press spacebar.

5. Tab once and type in the text with which you wish to replace the label
text.

6. Press enter, then control-s for save, then alt-F4 to exit the dictionary.

If that works, you can change the other labels without exiting the
dictionary.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Tom Behler
Sent: Sunday, February 03, 2013 4:41 PM
To: The Jaws for Windows support list.
Subject: Re: Changing labels in form fields?

Maybe, but I'm not sure how to do that.

Tom Behler

----- Original Message -----
From: "john.falter" <john.falter@verizon.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 3:07 PM
Subject: Re: Changing labels in form fields?


Could you use the JAWS dictionary to change the form fields?

----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 1:40 PM
Subject: Fw: Changing labels in form fields?


I'm not sure if this made it to the list earlier today, so I'm re-posting
just to be sure it gets through.

See below


----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 8:59 AM
Subject: Changing labels in form fields?


Hi, everyone.

I am working with an amateur radio logging software program, and have
what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit
cumbersome, and I want to customize them and make them shorter and
easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to
come up with a clear solution.

Dr. Tom Behler from Michigan

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

Tom Behler
 

Maybe, but I'm not sure how to do that.

Tom Behler

----- Original Message -----
From: "john.falter" <john.falter@verizon.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 3:07 PM
Subject: Re: Changing labels in form fields?


Could you use the JAWS dictionary to change the form fields?

----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 1:40 PM
Subject: Fw: Changing labels in form fields?


I'm not sure if this made it to the list earlier today, so I'm re-posting just to be sure it gets through.

See below


----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 8:59 AM
Subject: Changing labels in form fields?


Hi, everyone.

I am working with an amateur radio logging software program, and have what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit cumbersome, and I want to customize them and make them shorter and easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to come up with a clear solution.

Dr. Tom Behler from Michigan

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

Tom Behler
 

That could very well be.

I may have to ask the designer of the software.

Tom Behler

----- Original Message -----
From: "George B" <gbmagoo@comcast.net>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 3:06 PM
Subject: RE: Changing labels in form fields?


Well tom maybe the fields are locked and you can not change them

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Tom
Behler
Sent: Sunday, February 03, 2013 11:28
To: The Jaws for Windows support list.
Subject: Re: Changing labels in form fields?
Ann:
I tried that, but had no luck.
I found those instructions in the Jaws help files as well.
Tom Behler
----- Original Message -----
From: "Ann Byrne" <annakb@sbcglobal.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 1:43 PM
Subject: Re: Changing labels in form fields?

In Surf's Up, the instruction is for labeling forms in Html documents
such as web pages, so I don't know if that would work for your
program. It says to press insert+control+tab, type in the name you
want, and press enter.

Good luck!
At 07:59 AM 2/3/2013, you wrote:
Hi, everyone.

I am working with an amateur radio logging software program, and
have what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit
cumbersome, and I want to customize them and make them shorter and
easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet
to come up with a clear solution.

Dr. Tom Behler from Michigan


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Lists in Outlook 2010

Dani Pagador
 

Hi, Adrian.
To add to my previous reply, I just checked, and F6 will toggle you between
the results window and the search dialog. So you could do a search, toggle
with F6 to look at the results, then F6 back to the dialog to clear the
field and do another search.
HTH,
Dani

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 10:08 AM
To: The Jaws for Windows support list.
Subject: Lists in Outlook 2010

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201302
03/c82b3ff4/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Lists in Outlook 2010

Dani Pagador
 

Hi, Adrian.
In the second situation, when you do your search for mail and the "read now"
button comes up, do an F6 to get to the search results. You should then be
able to arrow through the messages, and hit enter on the one you want to
read.
HTH,
Dani

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 10:08 AM
To: The Jaws for Windows support list.
Subject: Lists in Outlook 2010

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201302
03/c82b3ff4/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Lists in Outlook 2010

Adrian Spratt
 

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20130203/c82b3ff4/attachment.html>


Re: Changing labels in form fields?

john.falter
 

Could you use the JAWS dictionary to change the form fields?

----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 1:40 PM
Subject: Fw: Changing labels in form fields?


I'm not sure if this made it to the list earlier today, so I'm re-posting just to be sure it gets through.

See below


----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 8:59 AM
Subject: Changing labels in form fields?


Hi, everyone.

I am working with an amateur radio logging software program, and have what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit cumbersome, and I want to customize them and make them shorter and easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to come up with a clear solution.

Dr. Tom Behler from Michigan

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

George B
 

Well tom maybe the fields are locked and you can not change them

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Tom
Behler
Sent: Sunday, February 03, 2013 11:28
To: The Jaws for Windows support list.
Subject: Re: Changing labels in form fields?

Ann:

I tried that, but had no luck.

I found those instructions in the Jaws help files as well.

Tom Behler

----- Original Message -----
From: "Ann Byrne" <annakb@sbcglobal.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 1:43 PM
Subject: Re: Changing labels in form fields?


In Surf's Up, the instruction is for labeling forms in Html documents
such as web pages, so I don't know if that would work for your
program. It says to press insert+control+tab, type in the name you
want, and press enter.

Good luck!
At 07:59 AM 2/3/2013, you wrote:
Hi, everyone.

I am working with an amateur radio logging software program, and
have what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit
cumbersome, and I want to customize them and make them shorter and
easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet
to come up with a clear solution.

Dr. Tom Behler from Michigan


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

Tom Behler
 

Ann:

I tried that, but had no luck.

I found those instructions in the Jaws help files as well.

Tom Behler

----- Original Message -----
From: "Ann Byrne" <annakb@sbcglobal.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 1:43 PM
Subject: Re: Changing labels in form fields?


In Surf's Up, the instruction is for labeling forms in Html documents such as web pages, so I don't know if that would work for your program. It says to press insert+control+tab, type in the name you want, and press enter.
Good luck!
At 07:59 AM 2/3/2013, you wrote:
Hi, everyone.

I am working with an amateur radio logging software program, and have what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit cumbersome, and I want to customize them and make them shorter and easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to come up with a clear solution.

Dr. Tom Behler from Michigan


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

Cy Selfridge
 

Hi Tom, yes I saw it earlier.
Cy

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Tom Behler
Sent: Sunday, February 03, 2013 11:41 AM
To: Jaws users e-mail list
Subject: Fw: Changing labels in form fields?

I'm not sure if this made it to the list earlier today, so I'm re-posting
just to be sure it gets through.

See below


----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 8:59 AM
Subject: Changing labels in form fields?


Hi, everyone.

I am working with an amateur radio logging software program, and have what
I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit
cumbersome, and I want to customize them and make them shorter and easier
to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to
come up with a clear solution.

Dr. Tom Behler from Michigan

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

Ann Byrne
 

In Surf's Up, the instruction is for labeling forms in Html documents such as web pages, so I don't know if that would work for your program. It says to press insert+control+tab, type in the name you want, and press enter.

Good luck!

At 07:59 AM 2/3/2013, you wrote:
Hi, everyone.

I am working with an amateur radio logging software program, and have what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit cumbersome, and I want to customize them and make them shorter and easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to come up with a clear solution.

Dr. Tom Behler from Michigan


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Fw: Changing labels in form fields?

Tom Behler
 

I'm not sure if this made it to the list earlier today, so I'm re-posting just to be sure it gets through.

See below

----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 8:59 AM
Subject: Changing labels in form fields?


Hi, everyone.

I am working with an amateur radio logging software program, and have what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit cumbersome, and I want to customize them and make them shorter and easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to come up with a clear solution.

Dr. Tom Behler from Michigan