Date   

Re: Lists in Outlook 2010

Adrian Spratt
 

Dani, that did the trick. Thanks.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Dani L Pagador
Sent: Sunday, February 03, 2013 3:27 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Lists in Outlook 2010

Hi, Adrian.
In the second situation, when you do your search for mail and the "read now"
button comes up, do an F6 to get to the search results. You should then be
able to arrow through the messages, and hit enter on the one you want to
read.
HTH,
Dani

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 10:08 AM
To: The Jaws for Windows support list.
Subject: Lists in Outlook 2010

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201302
03/c82b3ff4/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

Adrian Spratt
 

1. Select and copy the text of one of the labels you wish to change.

2. Ensure focus stays on the application.

3. Open the JAWS dictionary with JAWS key+d and press enter.

4. Press JAWS key+numpad 8 and you'll hear "Add." Press spacebar.

5. Tab once and type in the text with which you wish to replace the label
text.

6. Press enter, then control-s for save, then alt-F4 to exit the dictionary.

If that works, you can change the other labels without exiting the
dictionary.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Tom Behler
Sent: Sunday, February 03, 2013 4:41 PM
To: The Jaws for Windows support list.
Subject: Re: Changing labels in form fields?

Maybe, but I'm not sure how to do that.

Tom Behler

----- Original Message -----
From: "john.falter" <john.falter@verizon.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 3:07 PM
Subject: Re: Changing labels in form fields?


Could you use the JAWS dictionary to change the form fields?

----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 1:40 PM
Subject: Fw: Changing labels in form fields?


I'm not sure if this made it to the list earlier today, so I'm re-posting
just to be sure it gets through.

See below


----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 8:59 AM
Subject: Changing labels in form fields?


Hi, everyone.

I am working with an amateur radio logging software program, and have
what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit
cumbersome, and I want to customize them and make them shorter and
easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to
come up with a clear solution.

Dr. Tom Behler from Michigan

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

Tom Behler
 

Maybe, but I'm not sure how to do that.

Tom Behler

----- Original Message -----
From: "john.falter" <john.falter@verizon.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 3:07 PM
Subject: Re: Changing labels in form fields?


Could you use the JAWS dictionary to change the form fields?

----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 1:40 PM
Subject: Fw: Changing labels in form fields?


I'm not sure if this made it to the list earlier today, so I'm re-posting just to be sure it gets through.

See below


----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 8:59 AM
Subject: Changing labels in form fields?


Hi, everyone.

I am working with an amateur radio logging software program, and have what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit cumbersome, and I want to customize them and make them shorter and easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to come up with a clear solution.

Dr. Tom Behler from Michigan

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

Tom Behler
 

That could very well be.

I may have to ask the designer of the software.

Tom Behler

----- Original Message -----
From: "George B" <gbmagoo@comcast.net>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 3:06 PM
Subject: RE: Changing labels in form fields?


Well tom maybe the fields are locked and you can not change them

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Tom
Behler
Sent: Sunday, February 03, 2013 11:28
To: The Jaws for Windows support list.
Subject: Re: Changing labels in form fields?
Ann:
I tried that, but had no luck.
I found those instructions in the Jaws help files as well.
Tom Behler
----- Original Message -----
From: "Ann Byrne" <annakb@sbcglobal.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 1:43 PM
Subject: Re: Changing labels in form fields?

In Surf's Up, the instruction is for labeling forms in Html documents
such as web pages, so I don't know if that would work for your
program. It says to press insert+control+tab, type in the name you
want, and press enter.

Good luck!
At 07:59 AM 2/3/2013, you wrote:
Hi, everyone.

I am working with an amateur radio logging software program, and
have what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit
cumbersome, and I want to customize them and make them shorter and
easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet
to come up with a clear solution.

Dr. Tom Behler from Michigan


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Lists in Outlook 2010

Dani Pagador
 

Hi, Adrian.
To add to my previous reply, I just checked, and F6 will toggle you between
the results window and the search dialog. So you could do a search, toggle
with F6 to look at the results, then F6 back to the dialog to clear the
field and do another search.
HTH,
Dani

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 10:08 AM
To: The Jaws for Windows support list.
Subject: Lists in Outlook 2010

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201302
03/c82b3ff4/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Lists in Outlook 2010

Dani Pagador
 

Hi, Adrian.
In the second situation, when you do your search for mail and the "read now"
button comes up, do an F6 to get to the search results. You should then be
able to arrow through the messages, and hit enter on the one you want to
read.
HTH,
Dani

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Adrian Spratt
Sent: Sunday, February 03, 2013 10:08 AM
To: The Jaws for Windows support list.
Subject: Lists in Outlook 2010

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201302
03/c82b3ff4/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Lists in Outlook 2010

Adrian Spratt
 

Hi. I am unable to read lists in two areas in Outlook 2010, and I'm hoping
one of you will tell me what I'm doing wrong in each case.



First, while experimenting with message rules, I inadvertently created one
that is causing havoc. It's my understanding that when I go into manage
rules, a list of rules will appear. It doesn't. The only place where I can
produce a list of rules is later in the dialog, the run rules section.
However, I find no way to delete a specific rule there. Any ideas?



2. In Outlook 2003, I would press control+shift+f at the beginning of a
message list within a folder to search for messages with specific text, from
a certain sender, and so on. When MS completed the search, a button would
switch from "Stop" to something like "Read now. "This is still happening in
Outlook 2010. However, in 2003, a list of messages would then appear. I am
getting no such list in 2010, no matter how many times I tab around. Again,
any ideas?



Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20130203/c82b3ff4/attachment.html>


Re: Changing labels in form fields?

john.falter
 

Could you use the JAWS dictionary to change the form fields?

----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 1:40 PM
Subject: Fw: Changing labels in form fields?


I'm not sure if this made it to the list earlier today, so I'm re-posting just to be sure it gets through.

See below


----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 8:59 AM
Subject: Changing labels in form fields?


Hi, everyone.

I am working with an amateur radio logging software program, and have what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit cumbersome, and I want to customize them and make them shorter and easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to come up with a clear solution.

Dr. Tom Behler from Michigan

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

George B
 

Well tom maybe the fields are locked and you can not change them

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Tom
Behler
Sent: Sunday, February 03, 2013 11:28
To: The Jaws for Windows support list.
Subject: Re: Changing labels in form fields?

Ann:

I tried that, but had no luck.

I found those instructions in the Jaws help files as well.

Tom Behler

----- Original Message -----
From: "Ann Byrne" <annakb@sbcglobal.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 1:43 PM
Subject: Re: Changing labels in form fields?


In Surf's Up, the instruction is for labeling forms in Html documents
such as web pages, so I don't know if that would work for your
program. It says to press insert+control+tab, type in the name you
want, and press enter.

Good luck!
At 07:59 AM 2/3/2013, you wrote:
Hi, everyone.

I am working with an amateur radio logging software program, and
have what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit
cumbersome, and I want to customize them and make them shorter and
easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet
to come up with a clear solution.

Dr. Tom Behler from Michigan


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

Tom Behler
 

Ann:

I tried that, but had no luck.

I found those instructions in the Jaws help files as well.

Tom Behler

----- Original Message -----
From: "Ann Byrne" <annakb@sbcglobal.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 1:43 PM
Subject: Re: Changing labels in form fields?


In Surf's Up, the instruction is for labeling forms in Html documents such as web pages, so I don't know if that would work for your program. It says to press insert+control+tab, type in the name you want, and press enter.
Good luck!
At 07:59 AM 2/3/2013, you wrote:
Hi, everyone.

I am working with an amateur radio logging software program, and have what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit cumbersome, and I want to customize them and make them shorter and easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to come up with a clear solution.

Dr. Tom Behler from Michigan


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

Cy Selfridge
 

Hi Tom, yes I saw it earlier.
Cy

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Tom Behler
Sent: Sunday, February 03, 2013 11:41 AM
To: Jaws users e-mail list
Subject: Fw: Changing labels in form fields?

I'm not sure if this made it to the list earlier today, so I'm re-posting
just to be sure it gets through.

See below


----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 8:59 AM
Subject: Changing labels in form fields?


Hi, everyone.

I am working with an amateur radio logging software program, and have what
I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit
cumbersome, and I want to customize them and make them shorter and easier
to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to
come up with a clear solution.

Dr. Tom Behler from Michigan

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Changing labels in form fields?

Ann Byrne
 

In Surf's Up, the instruction is for labeling forms in Html documents such as web pages, so I don't know if that would work for your program. It says to press insert+control+tab, type in the name you want, and press enter.

Good luck!

At 07:59 AM 2/3/2013, you wrote:
Hi, everyone.

I am working with an amateur radio logging software program, and have what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit cumbersome, and I want to customize them and make them shorter and easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to come up with a clear solution.

Dr. Tom Behler from Michigan


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Fw: Changing labels in form fields?

Tom Behler
 

I'm not sure if this made it to the list earlier today, so I'm re-posting just to be sure it gets through.

See below

----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 8:59 AM
Subject: Changing labels in form fields?


Hi, everyone.

I am working with an amateur radio logging software program, and have what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit cumbersome, and I want to customize them and make them shorter and easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to come up with a clear solution.

Dr. Tom Behler from Michigan


Re: Off-Topic -- do not reply! Cross-Posted: Talking Tuner App for iPhone

Dave...
 

Apologies, James. In my haste, I included jfw and it really has no relevance
on here.


Dave Carlson
Tastefully composed and launched near the Pacific Ocean using a Dell
Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit

----- Original Message -----
From: "Farfar Carlson" <dgcarlson@sbcglobal.net>
To: <midimag@midimag.org>; <sib-access@freelists.org>; "ddots List Server"
<ddots-l@freelists.org>; "The Jaws for Windows support list."
<jfw@lists.the-jdh.com>
Sent: Sunday, February 03, 2013 09:53
Subject: Cross-Posted: Talking Tuner App for iPhone


To all music lovers on these lists:

Designed specifically for the visually-impaired. $0.99 on iTunes Store.

https://itunes.apple.com/us/app/talking-tuner/id421065079?mt=8

Dave Carlson
Tastefully composed and launched near the Pacific Ocean using a Dell
Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Cross-Posted: Talking Tuner App for iPhone

Dave...
 

To all music lovers on these lists:

Designed specifically for the visually-impaired. $0.99 on iTunes Store.

https://itunes.apple.com/us/app/talking-tuner/id421065079?mt=8

Dave Carlson
Tastefully composed and launched near the Pacific Ocean using a Dell
Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit


Changing labels in form fields?

Tom Behler
 

Hi, everyone.

I am working with an amateur radio logging software program, and have what I think is a pretty simple question:

How can I change the spoken labels for form fields?

The labels spoken in the software as it is now configured are a bit cumbersome, and I want to customize them and make them shorter and easier to identify as I tab from one data entry field to the next.

I have tried to find the answer in the Jaws help files, but have yet to come up with a clear solution.

Dr. Tom Behler from Michigan


Re: Installing scripts

Dave...
 

Adrian,

Alternatively, Once you've determined the name of the application with
Insert+Q, and compared it to the set of scripts, you could just edit the
configname.ini file in the ENU folder to set up an alias. That might end up
being easier than renaming a bunch of files.


Dave Carlson
Tastefully composed and launched near the Pacific Ocean using a Dell
Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit

----- Original Message -----
From: "Adrian Spratt" <Adrian@AdrianSpratt.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Saturday, February 02, 2013 19:27
Subject: Installing scripts


Hi. Would one of you remind me how to incorporate scripts into an
application? Specifically, I have a set of scripts for GoldWave that I put
in my ENU folder, but when I check the loaded scripts in GoldWave with
insert-q, the name doesn't seem to appear.



I have notes on this somewhere, but I've switched from XP to Win7 and I'm
trying to do everything at once. Someone with a ready answer could save me
yet more time.



Thanks.



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20130202/38d5a820/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Installing scripts

Dave...
 

Adrian,

Insert +q when in the application. Note the exact spelling of the name.exe

Then go to the ENU folder and find those scripts and make sure they are
named the same.



Dave Carlson
Tastefully composed and launched near the Pacific Ocean using a Dell
Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit

----- Original Message -----
From: "Adrian Spratt" <Adrian@AdrianSpratt.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Saturday, February 02, 2013 19:27
Subject: Installing scripts


Hi. Would one of you remind me how to incorporate scripts into an
application? Specifically, I have a set of scripts for GoldWave that I put
in my ENU folder, but when I check the loaded scripts in GoldWave with
insert-q, the name doesn't seem to appear.



I have notes on this somewhere, but I've switched from XP to Win7 and I'm
trying to do everything at once. Someone with a ready answer could save me
yet more time.



Thanks.



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20130202/38d5a820/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Installing scripts

Adrian Spratt
 

Hi. Would one of you remind me how to incorporate scripts into an
application? Specifically, I have a set of scripts for GoldWave that I put
in my ENU folder, but when I check the loaded scripts in GoldWave with
insert-q, the name doesn't seem to appear.



I have notes on this somewhere, but I've switched from XP to Win7 and I'm
trying to do everything at once. Someone with a ready answer could save me
yet more time.



Thanks.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20130202/38d5a820/attachment.html>


Re: Shortcut for Jaws with sound card?

Bill White <billwhite92701@...>
 

I believe the reason John wanted a shortcut for JAWS to use the sound card is that he wanted to have JAWS use the external sound card for music, and to use the internal sound card with JAWS for other applications. If it were possible to toggle use of the sound cards by JAWS, this would be very convenient, and I would be interested in it as well.
Bill White billwhite92701@dslextreme.com

----- Original Message -----
From: "Peter Tighe" <pstighe@mindspring.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Saturday, February 02, 2013 9:20 AM
Subject: Re: Shortcut for Jaws with sound card?



John,

I don't think a short cut is really needed!

I have two sound cards, one for default which I primarily use for music and the other which I use exclusively with Jaws.

You can set jaws to use a specific sound card, and leave all other programs to use the default. This means that you can record music without the Jaws voice interfeering.

To change Jaws to play through your nondefault sound card do the following:
From the jaws windowpressalt-u.

arrow down to sound cardand press enter.

You will see a list of all your sound cards. Some may be nentioned twice.

Arrow down to the non default card that says speakers and press enter.
This setting should holde for ever.

Peter


Sent: Saturday, February 02, 2013 7:56 AM
To: "jfw World List" <jfw@lists.the-jdh.com>
Subject: Shortcut for Jaws with sound card?

Is it possible to set up a shortcut to make Jaws load and run with a
particular sound card that is not the default? If it is, I would be
interested to know how to do it if someone can help.



If it isn't, then could anyone tell me how to make a batch file that will do
this?



Thanks in advance.



John



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20130202/1ed8dfab/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


__________ Information from ESET NOD32 Antivirus, version of virus signature database 7962 (20130202) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus signature database 7962 (20130202) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com