|
Re: good registry cleaner
Dave...
CCleaner is by far the best I've used. Very easy to understand the interface
toggle quoted messageShow quoted text
and accessible. Dave Carlson Tastefully composed and launched near the Pacific Ocean using a Dell Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit
----- Original Message -----
From: <cecropia64@...> To: "The Jaws for Windows support list." <jfw@...> Sent: Sunday, December 16, 2012 10:32 Subject: good registry cleaner HI FOLKS. DOES ANYBODY HAVE ANY GOOD SUGGESTIONS FOR AN ACCESIBLE REGISTRY CLEANER THAT ALSO HAPPENS TO BE FREE OR AT LEAST HAS A TRIAL VERSION. THANKS _______________________________________________ Jfw mailing list Jfw@... http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
|
|
|
|
Re: JAWS for DOS
Dave...
Dave,
toggle quoted messageShow quoted text
Excellent advice. Dave Carlson Tastefully composed and launched near the Pacific Ocean using a Dell Latitude E6520, JAWS 14, and Windows 7 Professional 32-bit
----- Original Message -----
From: "Dave Durber" <d.durber@...> To: "The Jaws for Windows support list." <jfw@...> Sent: Sunday, December 16, 2012 10:11 Subject: Re: JAWS for DOS Hello Carlos: Yes, you can put JAWS for DOS on a 1.44 floppy Disk. To my knowledge, you cannot use JFD to access the CMOS for a motherboard in any way nor, can you use JFD to delete/wipe/erase the CMOS settings for a motherboard. If you know where the jumper that resets the CMOS to factory defaults is located on your motherboard, change the jumper setting and turn on your computer so that the reset of the CMOS can be performed. After the CMOS has been reset to factory defaults, turn off the computer and return the jumper to its original location, otherwise, the CMOS will be reset to factory defaults, each time you turn on your computer. Unless you are really certain as to how the jumper on the motherboard must be set to perform the CMOS reset function, I would strongly recommend you get someone with vision, who is familiar with motherboards to help you with this task. Unless you are familiar with the CMOS of a particular motherboard, if you are totally blind, you will need sighted assistance to make the desired changes to the CMOS. HTH Sincerely: Dave Durber ----- Original Message ----- From: "Carlos Medrano" <crlsmedrano99@...> To: <jfw@...> Sent: Saturday, December 15, 2012 3:56 PM Subject: JAWS for DOS Hello _______________________________________________ Jfw mailing list Jfw@... http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
|
|
|
|
Re: JAWS for DOS
Doris and Chris
I think you actually can use the more modern dos screenreaders like asap or vocal eyes under an NT environment, i.e. in a console or you can run your dos screenreader from a boot floppy and access your nt system that way as long as the floppy has a driver to read the ntfs file system on the nt box.
toggle quoted messageShow quoted text
Doris
At 01:44 PM 12/17/2012 +0000, you wrote:
Good points. As I recall, you haven't been able to use a DOS screenreader in anything later than Win98. That's why I finally discontinued using my much-beloved ASAP.
|
|
|
|
Re: unsubscribing
Doug
Jfw-unsubscribe@....
toggle quoted messageShow quoted text
----- Original Message -----
From: "Brian Albriton" <autoharp747@...> To: "The Jaws for Windows support list." <jfw@...> Sent: Sunday, December 16, 2012 9:08 PM Subject: unsubcribing SorryFolks but I'm not seeing how to unsubscribe from this list in the messages.
|
|
|
|
Re: JAWS for DOS
Lisle, Ted (CHFS DMS)
Good points. As I recall, you haven't been able to use a DOS screenreader in anything later than Win98. That's why I finally discontinued using my much-beloved ASAP.
toggle quoted messageShow quoted text
Ted
-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Dave Durber Sent: Sunday, December 16, 2012 1:12 PM To: The Jaws for Windows support list. Subject: Re: JAWS for DOS Hello Carlos: Yes, you can put JAWS for DOS on a 1.44 floppy Disk. To my knowledge, you cannot use JFD to access the CMOS for a motherboard in any way nor, can you use JFD to delete/wipe/erase the CMOS settings for a motherboard. If you know where the jumper that resets the CMOS to factory defaults is located on your motherboard, change the jumper setting and turn on your computer so that the reset of the CMOS can be performed. After the CMOS has been reset to factory defaults, turn off the computer and return the jumper to its original location, otherwise, the CMOS will be reset to factory defaults, each time you turn on your computer. Unless you are really certain as to how the jumper on the motherboard must be set to perform the CMOS reset function, I would strongly recommend you get someone with vision, who is familiar with motherboards to help you with this task. Unless you are familiar with the CMOS of a particular motherboard, if you are totally blind, you will need sighted assistance to make the desired changes to the CMOS. HTH Sincerely: Dave Durber ----- Original Message ----- From: "Carlos Medrano" <crlsmedrano99@...> To: <jfw@...> Sent: Saturday, December 15, 2012 3:56 PM Subject: JAWS for DOS Hello _______________________________________________ Jfw mailing list Jfw@... http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
|
|
|
|
reading CMOS setup screen
Howard Traxler <howard@...>
I did this back in the middle '90s. Don't know if it would still work today:
toggle quoted messageShow quoted text
Having a Braille embosser connected to the parallel (LPT1) output port, get into the CMOS setup program. Hit the printscreen key; make an arrow key--or anything else that might change the screen. Hit the printscreen key again. Compare the two printouts to see what you did. Mighty slow and a big waste of paper; but you can get the job done. Much less paper waste if you use a parallel speech synthesizer such as available in the Braille Blazer embosser.
----- Original Message -----
From: "Dave Durber" <d.durber@...> To: "The Jaws for Windows support list." <jfw@...> Sent: Sunday, December 16, 2012 12:11 PM Subject: Re: JAWS for DOS Hello Carlos:
|
|
|
|
Re: antivirus and Jaws relationship
Lisle, Ted (CHFS DMS)
How big is SE? I am starting to suspect that what I got wasn't the Real McCoy.
toggle quoted messageShow quoted text
-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Kevin Lee Sent: Friday, December 14, 2012 5:08 PM To: The Jaws for Windows support list. Subject: Re: antivirus and Jaws relationship when you just think security essentials is being downloaded, microsoft essentials piggy backs it, it includes 2012 windows live mail, live messenger, ms family safety, and ms writer. when installing of what you are installing and what components. -----Original Message----- From: Ariel Sent: Friday, December 14, 2012 12:00 PM To: The Jaws for Windows support list. Subject: Re: antivirus and Jaws relationship Hi, Essentials is free. You can download it here: http://windows.microsoft.com/en-US/windows/security-essentials-download On 12/14/2012 2:27 PM, Harris.Robert@... wrote: Here at work I'll keep these notes for later use, meanwhile my home _______________________________________________ Jfw mailing list Jfw@... http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com _______________________________________________ Jfw mailing list Jfw@... http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
|
|
|
|
Re: unsubcribing
northstar1950@...
as found in the headers of your message:
List-Unsubscribe: <http://lists.the-jdh.com/mailman/options/jfw_lists.the-jdh.com>, <mailto:jfw-request@...?subject=unsubscribe> Legend has it that on Sunday 12/16/2012 09:07 PM, Brian Albriton said: ---------------------------------------- List-Unsubscribe: <http://lists.the-jdh.com/mailman/options/jfw_lists.the-jdh.com>,---------------------------------------- <http://www.sendspace.com/folder/i7xwg4>Click here to check out my sendspace offerings!
|
|
|
|
unsubcribing
Brian Albriton <autoharp747@...>
SorryFolks but I'm not seeing how to unsubscribe from this list in the messages.
|
|
|
|
Re: Thoughts on JAWS 14
Brian Albriton <autoharp747@...>
I could not activate or a change a combo box a couple of nights ago
toggle quoted messageShow quoted text
and jaws thirteen had no problem with the same website. Other than that, seems to be working pretty well. Brian
On 12/16/12, Dondi <zidnod63@...> wrote:
Hi Everyone, --
Brian
|
|
|
|
Re: Thoughts on JAWS 14
emma goodwin <emma.sleeptalk@...>
I haven't experienced any problems up to now. Many people have and
toggle quoted messageShow quoted text
some haven't so give it a try and then as Aidan said, check for the latest update and I'm sure you'll be fine. I don't see any issues yet but we all do different things with our computers.
On 12/16/12, Aidan Maher <aidan.smarttalk@...> wrote:
Wel, it works quite wel, instal it and just check for updates in the --
SleepTalk in action
|
|
|
|
Re: Thoughts on JAWS 14
Aidan Maher <aidan.smarttalk@...>
Wel, it works quite wel, instal it and just check for updates in the
toggle quoted messageShow quoted text
help menu. Then you will be good to go.
On 16/12/2012, Dondi <zidnod63@...> wrote:
Hi Everyone,
|
|
|
|
Re: crm systems
paul lemm
Hi,
toggle quoted messageShow quoted text
I don't know how much help it is, but we are moving over to a cRM system at work later next year. I believe it is from sales force . I haven't yet tried the system as it is not yet ready/built for us yet but the IT team have told me that sales force build their products with accessibility like screen readers and jaws in mind. I'm not sure if this is just for the system they are building for us specifically or for all there systems. And until I get to test the system I won't know how accessible it is, but it might be worth doing a google search for more info about sales force and jaws. Like I said I don't know if this in anyway helps but thought if nothing else it may just give you a starting point to systems that might work/help. Paul lemm
-----Original Message-----
From: Jfw [mailto:jfw-bounces@...] On Behalf Of Christopher Stouton Sent: 14 December 2012 04:39 To: jfw@... Subject: crm systems Hello, I was wondering if anyone could ask a rather hard jaws question? I’m looking for a job in the customer service and sales fields, where I’m having to tell the interviewers about jaws. however my question is, is there any crm, or call resource management systems jaws works with spacificly? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20121213/4e4479ad/attachment.html> _______________________________________________ Jfw mailing list Jfw@... http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
|
|
|
|
Thoughts on JAWS 14
Dondi
Hi Everyone,
I've been away for a while and was wondering what everybody's impression was about JAWS 14? Does it work right out of the box or do I have to look for some kind of a update on Freedom Scientific's web site to fix some problems? Dondi We are the music makers, And we are the dreamers of dreams,
|
|
|
|
Re: Installing Windows 8 independantly
Aidan Maher <aidan.smarttalk@...>
Wel, I don't have it yet, so I don't no exactly, but the refresh
toggle quoted messageShow quoted text
option should be located in pc settings as they call it now, or control panel, but i don't no furder, I guess it will ask for a warning and allow you to cansle if you wish, simular to a format. The only thing that I don't like, if joseph is correct, that you con't instal an upgrade if you go from windows7 to 8, microsoft says that in that case you need to do a custom instal, unless if you can buy the upgrade version wich you probibly did. But now this upgrade thing is not available in all regions so that means some of us have to use a cd from scratch wich means it must be a custom instal, that sucks, is there no way to start the custom so jaws can help you out in the first part. And the other thing I wunder, is that if you instal windows7, will narrator also be available after the second reboot, or is that only applying to windows8? I ask since when I got the setup assistant before I couldn't manage to get it running at all.
On 16/12/2012, Russell Solowoniuk <rsolowoniuk@...> wrote:
Thanks for this, but, how do I refresh Windows 8?
|
|
|
|
Re: Installing Windows 8 independantly
Russell Solowoniuk <rsolowoniuk@...>
Thanks for this, but, how do I refresh Windows 8?
toggle quoted messageShow quoted text
Russell Sent from my iMac running Mountain Lion!
On 2012-12-16, at 12:42 PM, Aidan Maher <aidan.smarttalk@...> wrote:
This shouldn't be a problem for 14 in windows8, I think you must
|
|
|
|
Re: good registry cleaner
Doris and Chris
The registry cleaner part of c-cleaner is good and free. Also, if you google for the free version of Abexo registry cleaner is this good also.
toggle quoted messageShow quoted text
hth Doris
At 01:32 PM 12/16/2012 -0500, you wrote:
HI FOLKS. DOES ANYBODY HAVE ANY GOOD SUGGESTIONS FOR AN ACCESIBLE REGISTRY CLEANER THAT ALSO HAPPENS TO BE FREE OR AT LEAST HAS A TRIAL VERSION. THANKS
|
|
|
|
Re: Installing Windows 8 independantly
Aidan Maher <aidan.smarttalk@...>
This shouldn't be a problem for 14 in windows8, I think you must
toggle quoted messageShow quoted text
remove jaws and then refresh, as the refresh only reset everything, the option wich wipe it all off is more likely called reset. But to be sure, first remove the vidio intercept components and then jaws after that, you can use NVDA to help out as you need to close down jaws before you begin this.
On 16/12/2012, Russell Solowoniuk <rsolowoniuk@...> wrote:
Hi Joseph,
|
|
|
|
Re: good registry cleaner
Aidan Maher <aidan.smarttalk@...>
I also would like to no, since most of them seem to mess things up
toggle quoted messageShow quoted text
rather than cleaning the necessary files. And also a drive wiper? But just not CCleaner. That really is not good for jaws users, maybe accessible, but it remove things you need and sometimes can affect jaws also.
On 16/12/2012, cecropia64@... <cecropia64@...> wrote:
HI FOLKS. DOES ANYBODY HAVE ANY GOOD SUGGESTIONS FOR AN ACCESIBLE
|
|
|
|
good registry cleaner
cecropia64
HI FOLKS. DOES ANYBODY HAVE ANY GOOD SUGGESTIONS FOR AN ACCESIBLE REGISTRY CLEANER THAT ALSO HAPPENS TO BE FREE OR AT LEAST HAS A TRIAL VERSION. THANKS
|
|
|