moderated Re: Getting JAWS to say cut, copied, and pasted


Mike B.
 


Hi Gene,
 
So, ultimately what setting did you change / modify to return the speaking of the cut, copy paste?  Thanks much.
 
 
Stay safe and take care.  Mike.
PSA Folks: You can still get gas for under a dollar fifty at Taco Bell!

----- Original Message -----
Sent: Wednesday, June 29, 2022 12:31 PM
Subject: Re: Getting JAWS to say cut, copied, and pasted

Hi Nermin!

I am one of those people who never gives up just because I've asked for
help. So after sending my question, I continued trying to remember how
to get those messages back and eventually found it. But that doesn't
mean I don't appreciate your answer because I really do, thanks a lot!

Gene...


On 6/29/2022 2:11 AM, Nermin via groups.io wrote:
> Hi Gene,
>
>
> if you want the settings to apply to all programmes, do the following.
>
>
> 1. Open Settings Centre by pressing JAWSKey+6 on the number row or
> selecting it using insert+F2 then going down the list till you find
> Settings Centre, and press enter if you used the list method.
>
> 2. In the settings search box type "verbosity" without the quotes.
>
> 3. A list should appear containing "configure verbosity levels". Select
> the option by going up and down the list and pressing enter on the item.
>
> 4. once there, expand the settings using Right Arrow, which will give
> you the three options "beginner, Intermediate, and advanced".
>
> 5. Go to the one you're usually using, then Press the space bar. Do not
> use enter, it is important to press the space bar to open the
> configuration dialogue for those options!
>
> 6. Locate the option that says "JAWS Message", and if it's unchecked,
> check it using the space bar.
>
> 7. Press OK to exit out of the configuration dialogue, then press OK
> again to exit the Settings Centre.
>
>
> Now you should hear copied, cut, pasted, or copied selection to
> clipboard, depending on whether you've chosen long or short messages for
> your verbosity levels.
>
>
> Good luck,
>
> Nermin
>
>
>
>
>
>




Join main@jfw.groups.io to automatically receive all group messages.