moderated Re: Openbook 9.0

David Diamond

The FS rep did save the settings. At least save settings was pressed. It is a mystery why the settings were not saved.

-----Original Message-----
From: <> On Behalf Of Richard
Sent: November 27, 2020 10:20 AM
Subject: Re: Openbook 9.0

The key with Openbook is to adjust your settings as you want them and then
save the settings.
I have my most often used settings that I saved over top of the factory
settings, so when I start it up, it uses the modified default settings.
You can save as many settings configurations as you want, just give them
different names.
If the FS person who helped you did not have you save those settings, then
you need to recreate them, and then save the settings either over the
default, or with a unique name that you then have to load each time you boot

"The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying.
There is an art, it says, or rather, a knack to flying. The knack lies in learning
how to throw yourself at the ground and miss."
--Douglas Adams, from Life, The Universe and Everything, p.59

Check out my web site at:

*I'm not the card shark

-----Original Message-----
From: <> On Behalf Of David
Sent: Friday, November 27, 2020 9:59 AM
Subject: Re: Openbook 9.0

How does OCR exactly work? I too have open book 9.0 and it always reverts
back to the factory setting, slower then molasis in January. Yes, I did contact
Vispero and he got it to work properly. Only problem was as soon as I turned
off the computer then booted it up again, I had the same problem. Thus will
the OCR be able to read scanned bills or letters the way open book is
supposed too?

-----Original Message-----
From: <> On Behalf Of Don H
Sent: November 27, 2020 9:46 AM
Subject: Re: Openbook 9.0

FS has not updated Open book for many years and since OCR is built in to
Jaws I don't think Open Book will ever be updated.
On 11/27/2020 11:36 AM, O.Addison Gethers wrote:
> Hi All I have this Openbook 9.0 versionĀ  since 2010 ,Is there a new > verson
of Openbook version ? If so ,where can I get it from?
> Addison

Join to automatically receive all group messages.