moderated Re: Laptop updating


nope, the processor can support up to 32 GB and the motherboard has 4 slots.

-------- Original Message --------
From: Glenn / Lenny []
To: <>
Date: Tuesday, September 17, 2019, 6:44 PM
Subject: Laptop updating
It could be that 8GB is the computer's capacity.
----- Original Message -----
From: "Mario" <>
To: <>
Sent: Tuesday, September 17, 2019 5:42 PM
Subject: Re: Laptop updating

when the scan results with recommended modules but none have the
capacity that is wanted, is there a way to specify or see higher
capacity modules? for example, the results show 2 2 GB and 2 4 GB
modules but you want at least 2 single 8 GB modules to purchase as a
replacement for the 2 4 GB modules in the PC.

-------- Original Message --------
From: Mike B []
To: <>
Date: Tuesday, September 17, 2019, 6:08 PM
Subject: Laptop updating
As far as RAM goes, I would go with Crucial. You can go to, <>
and run a Crucial scan of your computer. This scan will tell you what
your motherboard maximum amount is, also tell you how many slots you
have and give you the recommended RAM specifically for your motherboard.
For the SSD, I've never used a Crucial SSD, but I've always used the
Samsung brand and have had nothing but good luck with it. I'm sure
there other excellent choices, but this is only my 2¢ worth.

Take care. Mike. Sent from my iBarstool. Go dodgers!
I believe that everything happens for a reason. Usually, the reason is
that somebody screwed up.
----- Original Message -----
*From:* Rick Mladek <>
*To:* <>
*Sent:* Tuesday, September 17, 2019 2:32 PM
*Subject:* Re: Laptop updating

Thank you.

I’ll let you know how it goes. Any referrals on the ram sticks and sd HD?

*From:* <>
< <>> *On Behalf Of *Glenn /
*Sent:* Tuesday, September 17, 2019 4:18 PM
*To:* <>
*Subject:* Re: Laptop updating

Hi Rick,

I have changed many laptop HDs and RAM sticks.

Usually there are two separate covers for these on the underside of the
laptop, but sometimes there is just one cover.

It will have screws to remove, and you will have to feel for the screws
and then the patterns of seams to figure out which is which.

The RAM cover is usually smaller

The RAM will have wire on the sides of the RAM that hold in the RAM
stick or sticks.

    You typically squeeze the sides of the RAM to lift it out.

    Forget the idea of a wrist strap, as that is for sighted folk who
    may not rest their arm on the chassis while doing the work. The
    wrist strap is to discharge static from your body, but I believe
    that it would not be possible to non-visually do this without
    touching the chassis.

    Make note of the notch in the RAM stick along the contacts, as there
    is a bump that it lines up with in the slot that can be felt.

    The HD will pull away from where it slides in, there is usually a
    cover to unscrew from that before sliding it out.


    You may want to feel the parts you are putting in carefully, so you
    can compare them for orientation in the motherboard.



    ----- Original Message -----

    *From:*Rick Mladek <>

    *To:* <>

    *Sent:*Tuesday, September 17, 2019 3:07 PM

    *Subject:*Laptop updating

    Good afternoon all,

    With the talk regarding windows 7 and 10, I recently noticed my
    laptop is windows 7, as well. I will update this to windows 10 and
    although being a Dell XPS 15Z model, it is as slow as a herd of
    turtles comparing to my desktop which has a SD HD. I’ll be putting
    in a SD HD, upgrading the ram from 4 to 8 and therefore, my

    When I take the SD HD and have it as main and then use the older
    7200 HD as a back-up drive, is this more difficult and I should have
    a computer store do the work or is is all this work able to be done?
    I will have unprofessional sighted assistance and have worked on and
    built tower systems but with the laptop and the smaller size, is
    this more than I should attempt?

    Also, I would be attempting to do all the shuffling of information
    from the old hard drive to the new SD with the latest version/update
    of Jaws 2019.

    Thanks for all comments,



Join to automatically receive all group messages.