-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Monday, 16 September 2019 3:38 AM
To: main@jfw.groups.io
Subject: Re: Scanning a document in K1000 and Open Book

The OpenBook setting doesn't really maintain the
format despite what it says. If I needed
something exact, I would go with a commercial
program like Abbyy fine reader or Prismo. Or
even the native ocr package that comes with your scanner.
or At 11:26 AM 9/15/2019, you wrote:

IN Openbook, there is an exact view setting that
tries to maintain the original format.
So depending on if you want it to maintain
columns or not, there is another setting for that.
I don't have it installed right now so I can't check.


Richard

ðY­­ Live long and prosper


Check out my web site at: www.turner42.com

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Sunday, September 15, 2019 9:24 AM
To: main@jfw.groups.io
Subject: Re: Scanning a document in K1000 and Open Book

a slight correction and some other info:

when pressing numpad 6, make sure the numpad is
set to the reading keypad (insert+numpad - (it's
a toggle that cycles)). to save the
configuration, press alt+t and then v and enter
if there's only the default configuration. you
can setup (I don't know if there's a limit)
custom configurations taylored to your needs.
you can switch to a custom configuration
manually after starting K1000 (alt+t and then l,
arrow to the configuration name and enter). I
don't know if there's a way to automatically
load a custom configuration instead of K1000
starting with the default configuration.

-------- Original Message --------
From: Mario [mailto:mrb620@...]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Sunday, September 15, 2019, 11:59 AM
Subject: Scanning a document in K1000 and Open
Book in K1000, numpad 6 will toggle between
column identification between being enabled or
disabled. toggle it to disabled. if you want,
don't forget to save the configuration so the setting persists.

-------- Original Message --------
From: tom x [mailto:ballistic719@...]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Saturday, September 14, 2019, 5:26 AM
Subject: Scanning a document in K1000 and Open Book Hi,

Does anyone know if there is a setting which can
be altered in the latest versions of either
K1000 or Open Book so that the display on the
screenor the saved document matches the layout of the original material?

I need to scan some technical material and have
the result match the layout of the original
document.Currently the lines are joined and all
over the place which is vastly different from the original document.

Can anyone help?

Thanks

Tom






.