moderated Re: jaws does not work properly in admin command window
Bill White <billwhite92701@...>
CMD and legacy are two different things. You first make sure you are usingtoggle quoted messageShow quoted text
CMD instead of power shell, then you go into CMD options and turn on legacy
From: firstname.lastname@example.org [mailto:email@example.com] On Behalf Of Steve Nutt
Sent: Sunday, June 23, 2019 11:52 AM
Subject: Re: jaws does not work properly in admin command window
You may have to set the command prompt to be legacy instead of using
You can do this in CMD properties.
All the best
From: firstname.lastname@example.org <email@example.com> On Behalf Of John Covici
Sent: 22 June 2019 19:52
Subject: jaws does not work properly in admin command window
Hi. At least with version 1809, jfw will not read anything in the command
window if run as administrator. If I virtualize the window, I see the text,
but other wise nothing -- jaws cursor reads nothing as well. Tech support
says its not supported, but that makes no sense to me and Narrator reads it
Thanks in advance for any suggestions.
Your life is like a penny. You're going to lose it. The question is:
you spend it?
John Covici wb2una