Re: Shortcuts for track changes in Word

Kimber Gardner


Yes, this would be the view and you could change it by going to the
view tab. In Word 2013, and I think 2010 as well, alt+W will get you
to the view tab. Then use your tab key to move through the possible
views. Whichever view you are defaulting to will be checked.

I hope this helps.


On 5/1/15, Kevin Hourigan via Jfw <> wrote:
Hello Ed,
Thank you for this.
When you refer to print and draft is that when Word opens and Jaws says
"Print View"? And if so, how does one move from print to draft please?
Thanks again,
Cheers Kevin.

-----Original Message-----
From: Ed Marquette via Jfw
Sent: Friday, May 01, 2015 1:26 AM
To: 'The Jaws for Windows support list.'
Cc: Ed Marquette
Subject: RE: Shortcuts for track changes in Word

Hello Paul:
I don't know that my solution has semantic significance, but here
is what I did.
I assigned the "Next" and "Previous" commands to the quick access
toolbar. That way, when I want to go forward I use Alt plus 4,
and if I want to go backwards, I use Alt plus 3. That way, I move
by revision. It is at least fast.
I thought you said you were in Word 2010. When I checked the key
sequence, I found that Alt followed by r and then f moves back a
change and Alt followed by r and then h moves forward to the next
change. (I had to check since I assigned these keys so long ago
that I forgot them.)
Actually, that key sequence does not has semantic significance at
first blush, but "r" does relate to "revisions," though it
actually stands for "review" in the Microsoft world, and f is to
the left (going backwards on a line) and h is to the right (going
forward on a line. So, it isn't impossible to remember.
To assign a key sequence to the quick access toolbar, just hit alt
and then r. Be sure to hit tab next. Then, hit right arrow until
you come to the end of the comment section. The track change
sequence of ribbon commands should come next. Then use the tab
key (otherwise, you will skip over some of the commands). You
will come to a series of 4 ribbon commands.
The first is previous revision, then comes accept and move to
next. Then follows reject and move on. Finally you come simply
to next revision.
Once you have landed on the option you want, JAWS should announce
the key sequence to get there faster. Confirm that the key
sequences I gave you (above) are correct.
Again, once there, hit the applications key and choose to put the
command you want on the quick access toolbar. You should do
previous first. That should assign it a lower numbered hotkey
(like my Alt plus 3 for previous). Then assign your next revision
key to the quick access toolbar (or QAT). That should give you a
higher number, e.g., Alt plus 4. Of course, your numbers will
depend upon what you already have on the QAT. Out of the box,
Word has some utterly worthless commands (commands where other
shortcut keys are faster). Get rid of those, and put useful ones
on the QAT.
Of course, Alt plus r and then f and Alt plus r and then h isn't
really all that bad. The only unfortunate thing is that "f" gets
associated in my mind with "forward," when it is really backward.
As for comments, the same principles apply. JAWS, however, in my
experience, does a lousy job with comments. Once inside them, it
is nearly impossible to get out and not land somewhere entirely
Using the Windows plus semicolon is about as good as any. Find
the comment you want that way and then tab to OK. Press ENTER and
you'll be in the document (right in front of the comment. If, in
your verbosity menu, you have turned on the reading of comments,
as your cursor passes over the comment, you will hear it.
If you ever get inside a comment and want to get out, may God have
mercy on you. The only way I've found to get out of a comment
halfway gracefully is to make sure you are in "draft" before you
start the adventure. If you are in "Print," you may have to close
down Word to get out.
If you are in "Draft," escape will get you out, but you may be
thrown to the top of the document.
Also, you know JAWSKEY plus z allows you to use navigation keys.
In a small document, those work OK. In a big document, not so
Hope this helps. As I mentioned in a recent post DO NOT depend on
JAWS commands to tell you the color of the track changes. JAWS,
especially JAWS 16, is hopelessly unreliable.

-----Original Message-----
From: Jfw [] On Behalf Of Paul
Martz via Jfw
Sent: Thursday, April 30, 2015 7:42 PM
To: 'The Jaws for Windows support list.'
Cc: Paul Martz
Subject: RE: Shortcuts for track changes in Word

That's interesting, and thanks. But it seems to bring up either
comments or changes, not both at once. And unfortunately it's
doesn't stay open for an
alt+tab. I'm using Office 2010, if that matters, and current /
latest JAWS.

On a related topic, does anyone know how to get JAWS to read a
comment? I'm having some luck here by selecting the comment text
with ctrl+A, but I wonder if there's a more elegant way.

-----Original Message-----
From: Jfw [] On Behalf Of Tim
Ford via Jfw
Sent: Thursday, April 30, 2015 5:27 PM
To: The Jaws for Windows support list.
Cc: Tim Ford
Subject: Re: Shortcuts for track changes in Word

Hi Paul,

For starters, I use the windows key plus the ;. That brings up a
JAWS-friendly list box of the fields in the Word document that are
comments, revisions, footnotes, endnotes,and provide a link to
each, along with the author's name and at least the opening part
of the comment. Very helpful, and I think you can leave that
window with the list open, and with alt-tab, an easy way of
navigating between the document and that list. Let me know how
things go with that approach.

Tim Ford

-----Original Message-----
From: Paul Martz via Jfw
Sent: Thursday, April 30, 2015 3:54 PM
To: JAWS Users
Cc: Paul Martz
Subject: Shortcuts for track changes in Word

Hi all. I need to develop a scheme of keyboard shortcuts for
reviewing MS Word documents using track changes. I'd rather not
reinvent the wheel, so if someone here has already devised an
efficient system, could you please share it?

The simplest idea would be to assign keyboard shortcuts for the
"next/previous change or comment" commands. I'd use those
shortcuts to place the PC cursor at the desired change or comment,
review it, and then take an action using the context menu.

Not sure what key commands I would assign, though. Ctrl+shift+O /
P for the "next/previous change or comment" would work well
ergonomically, as an example, but lacks semantic significance, so
I'm open to other ideas.

Thanks for any input.

-------------- next part --------------
An HTML attachment was scrubbed...
Jfw mailing list

Jfw mailing list

Jfw mailing list

Jfw mailing list

Jfw mailing list

Join to automatically receive all group messages.