Re: JAWS for DOS

Dave Durber
 

Hello Carlos:

Yes, you can put JAWS for DOS on a 1.44 floppy Disk.

To my knowledge, you cannot use JFD to access the CMOS for a motherboard in any way nor, can you use JFD to delete/wipe/erase the CMOS settings for a motherboard.

If you know where the jumper that resets the CMOS to factory defaults is located on your motherboard, change the jumper setting and turn on your computer so that the reset of the CMOS can be performed.

After the CMOS has been reset to factory defaults, turn off the computer and return the jumper to its original location, otherwise, the CMOS will be reset to factory defaults, each time you turn on your computer.

Unless you are really certain as to how the jumper on the motherboard must be set to perform the CMOS reset function, I would strongly recommend you get someone with vision, who is familiar with motherboards to help you with this task.

Unless you are familiar with the CMOS of a particular motherboard, if you are totally blind, you will need sighted assistance to make the desired changes to the CMOS.

HTH

Sincerely:

Dave Durber

----- Original Message -----
From: "Carlos Medrano" <crlsmedrano99@...>
To: <jfw@...>
Sent: Saturday, December 15, 2012 3:56 PM
Subject: JAWS for DOS


Hello

Can you put jaws for dos on a floppy disk? I need dos to wipe my CMOS and
the only way that I can do it is off a dos floppy.



Thanks,



Carlos

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20121215/97ba9645/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Join main@jfw.groups.io to automatically receive all group messages.